Pasar al contenido principal

CO-PRIVACY: PRIVACIDAD SOSTENIBLE PARA UNA SOCIEDAD DE LA INFORMACION SOSTENIBLE. SUBPROYECTO OSNPRIVACY

TIN2011-27076-C03-02

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2011
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario FUNDACIO PER A LA UNIVERSITAT OBERTA DE CATALUNYA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Repositorio Digital de la UPF
Publicación Artículo científico (JournalArticle)

J3Gen: a PRNG for low-cost passive RFID

  • Melià Seguí, Joan
  • Garcia-Alfaro, Joaquin
  • Herrera-Joancomartí, Jordi
Pseudorandom number generation (PRNG) is the main security tool in low-cost passive radio-frequency identification (RFID) technologies, such as EPC Gen2. We present a lightweight PRNG design for low-cost passive RFID tags, named J3Gen. J3Gen is based on a linear feedback shift register (LFSR) configured with multiple feedback polynomials. The polynomials are alternated during the generation of sequences via a physical source of randomness. J3Gen successfully handles the inherent linearity of LFSR based PRNGs and satisfies the statistical requirements imposed by the EPC Gen2 standard. A hardware implementation of J3Gen is presented and evaluated with regard to different design parameters, defining the key-equivalence security and nonlinearity of the design. The results of a SPICE simulation confirm the power-consumption suitability of the proposal., The authors would like to thank Josep Domingo-Ferrer, Miquel Soriano and David Megías for their helpful comments during the realization of this work. The authors thank as well the anonymous reviewers for their valuable comments and suggestions to improve the quality of the paper. This work was partly funded by the Spanish Government through projects TSI2007-65406-C03-03 E-AEGIS, TIN2011-27076-C03-02 CO-PRIVACY, CONSOLIDER INGENIO 2010 CSD2007-0004 ARES, and TIN2010-15764 N-KHRONOUS.
Repositorio Digital de la UPF
Publicación Artículo científico (JournalArticle)

Using Augmented Reality and Internet of Things to improve accessibility of people with motor disabilities in the context of Smart Cities

  • Rashid, Zulqarnain
  • Melià Seguí, Joan
  • Pous Andrés, Rafael
  • Peig Olivé, Enric
Smart Cities need to be designed to allow the inclusion of all kinds of citizens. For instance, motor disabled people like wheelchair users may have problems to interact with the city. Internet of Things (IoT) technologies provide the tools to include all citizens in the Smart City context. For example, wheelchair users may not be able to reach items placed beyond their arm’s length, limiting their independence in everyday activities like shopping, or visiting libraries. We have developed a system that enables wheelchair users to interact with items placed beyond their arm’s length, with the help of Augmented Reality (AR) and Radio Frequency Identification (RFID) technologies. Our proposed system is an interactive AR application that runs on different interfaces, allowing the user to digitally interact with the physical items on the shelf, thanks to an updated inventory provided by an RFID system. The resulting experience is close to being able to browse a shelf, clicking on it and obtaining information about the items it contains, allowing wheelchair users to shop independently, and providing autonomy in their everyday activities. Fourteen wheelchair users with different degrees of impairment have participated in the study and development of the system. The evaluation results show promising results towards more independence of wheelchair users, providing an opportunity for equality improvement., This work was partly funded by the Spanish Government through projects TIN2012-34965 PIGALL, TIN2011-27076-C03-02 CO-PRIVACY, TIN2014-57364-C2-2-R SMARTGLACIS, TEC2015-71303-R SINERGIA, and TSI-020602-2012-147 IRIS. The authors also acknowledge support from Obra Social “la Caixa” -ACUP through project 2011ACUP00261.
O2, repositorio institucional de la UOC
Publicación Contribución de congreso (ConferenceOutput)

Towards Simulated Morality Systems: Role-Playing Games as Artificial Societies

  • Casas-Roma, Joan
  • Nelson, Mark J.
  • Arnedo-Moreno, Joan
  • Gaudl, Swen
  • Saunders, Rob
Computer role-playing games (RPGs) often include a simulated morality system as a core design element. Games’ morality systems can include both god’s eye view aspects, in which certain actions are inherently judged by the simulated world to be good or evil, as well as social simulations, in which non-player characters (NPCs) react to judgments of the player’s and each others’ activities. Games with a larger amount of social simulation have clear affinities to multi-agent systems (MAS) research on artificial societies. They differ in a number of key respects, however, due to a mixture of pragmatic game-design considerations and their typically strong embeddedness in narrative arcs, resulting in many important aspects of moral systems being represented using explicitly scripted scenarios rather than through agent-based simulations. In this position paper, we argue that these similarities and differences make RPGs a promising challenge domain for MAS research, highlighting features such as moral dilemmas situated in more organic settings than seen in game-theoretic models of social dilemmas, and heterogeneous representations of morality that use both moral calculus systems and social simulation. We illustrate some possible approaches using a case study of the morality systems in the game The Elder Scrolls IV: Oblivion.
O2, repositorio institucional de la UOC
Publicación Artículo científico (JournalArticle)

Adjustable audio watermarking algorithm based on DWPT and psychoacoustic modeling

  • Hemis, Mustapha
  • BOUDRAA, Bachir
  • Megias, David
  • Merazi-Meksen, Thouraya
This paper presents a novel adjustable audio watermarking method with high auditory quality by exploiting the discrete wavelet packet transform (DWPT), psychoacoustic modeling and distortion compensated-dither modulation (DC-DM) quantization. While the DWPT is used to divide the audio frames into several frequency sub-bands, the psychoacoustic model is intergraded to determine the appropriate sub-bands for watermarking and to control the number of embedded bits in each one. Then, the DC-DM technique is used to embed the watermark bits into the appropriate DWPT coefficients. The synchronization code technique is adopted in the proposed method to withstand desynchronization attacks. In order to achieve an adjustable watermarking scheme, two regulator parameters are provided to manage the capacity-robustness trade-off. The performance of the watermarking scheme is evaluated by examining different host audio signals under various watermarking attacks. The results show excellent imperceptibility of watermarked signals with an average ODG of − 0.3. In addition, the proposed scheme provides strong robustness against the attacks with low capacity. However, high capacity (about 2500 bps) can be achieved while maintaining a reasonable robustness. A comparison with some state-of-the-art audio watermarking schemes reveals that the proposed method provides competitive results.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

J3Gen: a PRNG for low-cost passive RFID

  • Melià Seguí, Joan
  • Garcia-Alfaro, Joaquin
  • Herrera-Joancomartí, Jordi
Pseudorandom number generation (PRNG) is the main security tool in low-cost passive radio-frequency identification (RFID) technologies, such as EPC Gen2. We present a lightweight PRNG design for low-cost passive RFID tags, named J3Gen. J3Gen is based on a linear feedback shift register (LFSR) configured with multiple feedback polynomials. The polynomials are alternated during the generation of sequences via a physical source of randomness. J3Gen successfully handles the inherent linearity of LFSR based PRNGs and satisfies the statistical requirements imposed by the EPC Gen2 standard. A hardware implementation of J3Gen is presented and evaluated with regard to different design parameters, defining the key-equivalence security and nonlinearity of the design. The results of a SPICE simulation confirm the power-consumption suitability of the proposal., The authors would like to thank Josep Domingo-Ferrer, Miquel Soriano and David Megías for their helpful comments during the realization of this work. The authors thank as well the anonymous reviewers for their valuable comments and suggestions to improve the quality of the paper. This work was partly funded by the Spanish Government through projects TSI2007-65406-C03-03 E-AEGIS, TIN2011-27076-C03-02 CO-PRIVACY, CONSOLIDER INGENIO 2010 CSD2007-0004 ARES, and TIN2010-15764 N-KHRONOUS.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Using Augmented Reality and Internet of Things to improve accessibility of people with motor disabilities in the context of Smart Cities

  • Rashid, Zulqarnain
  • Melià Seguí, Joan
  • Pous Andrés, Rafael
  • Peig Olivé, Enric
Smart Cities need to be designed to allow the inclusion of all kinds of citizens. For instance, motor disabled people like wheelchair users may have problems to interact with the city. Internet of Things (IoT) technologies provide the tools to include all citizens in the Smart City context. For example, wheelchair users may not be able to reach items placed beyond their arm’s length, limiting their independence in everyday activities like shopping, or visiting libraries. We have developed a system that enables wheelchair users to interact with items placed beyond their arm’s length, with the help of Augmented Reality (AR) and Radio Frequency Identification (RFID) technologies. Our proposed system is an interactive AR application that runs on different interfaces, allowing the user to digitally interact with the physical items on the shelf, thanks to an updated inventory provided by an RFID system. The resulting experience is close to being able to browse a shelf, clicking on it and obtaining information about the items it contains, allowing wheelchair users to shop independently, and providing autonomy in their everyday activities. Fourteen wheelchair users with different degrees of impairment have participated in the study and development of the system. The evaluation results show promising results towards more independence of wheelchair users, providing an opportunity for equality improvement., This work was partly funded by the Spanish Government through projects TIN2012-34965 PIGALL, TIN2011-27076-C03-02 CO-PRIVACY, TIN2014-57364-C2-2-R SMARTGLACIS, TEC2015-71303-R SINERGIA, and TSI-020602-2012-147 IRIS. The authors also acknowledge support from Obra Social “la Caixa” -ACUP through project 2011ACUP00261.