Pasar al contenido principal

ADAPTIVE AND RESILIENT NETWORKED EMBEDDED SYSTEMS

TIN2012-38308-C02-01

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2012
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Secretaría de Estado de Investigación, Desarrollo e Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Injecting Intermittent Faults for the Dependability Assessment of a Fault-Tolerant Microcomputer System

  • Gil Tomás, Daniel Antonio|||0000-0001-9225-1998
  • Gracia-Morán, Joaquín|||0000-0001-9715-8960
  • Baraza-Calvo, Juan-Carlos|||0000-0001-7692-2309
  • Saiz-Adalid, Luis-J.|||0000-0002-4868-2050
  • Gil, Pedro|||0000-0002-9364-7385
As scaling is more and more aggressive, intermittent faults are increasing their importance in current deep submicron complementary metal-oxide-semiconductor (CMOS) technologies. This work shows the dependability assessment of a fault-tol- erant computer system against intermittent faults. The applied methodology lies in VHDL-based fault injection, which allows the assessment in early design phases, together with a high level of observability and controllability. The evaluated system is a duplex microcontroller system with cold stand-by sparing. A wide set of intermittent fault models have been injected, and from the simulation traces, coverages and latencies have been measured. Markov models for this system have been generated and some dependability functions, such as reliability and safety, have been calculated. From these results, some enhancements of detection and recovery mechanisms have been suggested. The methodology presented is general to any fault-tolerant computer system., This work was supported in part by the Universitat Politecnica de Valencia under the Research Project SP20120806, and in part by the Spanish Government under the Research Project TIN2012-38308-C02-01. Associate Editor: J. Shortle.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Analysis of results in Dependability Benchmarking: Can we do better?&quot

  • Martínez, Miquel
  • Friginal López, Jesús
  • de-Andrés-Martínez, David|||0000-0002-4744-3795
  • Ruiz, Juan Carlos|||0000-0001-7678-3513
Dependability benchmarking has become through the years more and more important in the process of systems evaluation. The increasing need for making systems more dependable in presence of perturbations has contributed to this fact. Nevertheless, even though many studies have focused on different areas related to dependability benchmarking, and some others have focused on the need of providing these benchmarks with good quality measures, there is still a gap in the process of the analysis of results. This paper focuses on providing a first glance at different approaches that may help filling this gap by making explicit the criteria followed in the decision making process., This work is partially supported by the Spanish project ARENES (TIN2012-38308-C02-01), the ANR French project AMORES (ANR-11-INSE-010), and the Intel Doctoral Student Honour Programme 2012.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

From measures to conclusions using Analytic Hierarchy Process in dependability benchmarkind

  • Martínez Raga, Miquel
  • Friginal López, Jesús
  • de-Andrés-Martínez, David|||0000-0002-4744-3795
  • Ruiz, Juan Carlos|||0000-0001-7678-3513
Dependability benchmarks are aimed at comparing and selecting alternatives in application domains where faulty conditions are present. However, despite its importance and intrinsic complexity, a rigorous decision process has not been defined yet. As a result, benchmark conclusions may vary from one evaluator to another, and often, that process is vague and hard to follow, or even nonexistent. This situation affects the repeatability and reproducibility of that analysis process, making difficult the cross-comparison of results between works. To mitigate these problems, this paper proposes the integration of the analytic hierarchy process (AHP), a widely used multicriteria decision-making technique, within dependability benchmarks. In addition, an assisted pairwise comparison approach is proposed to automate those aspects of AHP that rely on judgmental comparisons, thus granting consistent, repeatable, and reproducible conclusions. Results from a dependability benchmark for wireless sensor networks are used to illustrate and validate the proposed approach., This work was supported in part by the Spanish Project ARENES under Grant TIN2012-38308-C02-01 and in part by the Programa de Ayudas de Investigacion y Desarrollo through the Universitat Politecnica de Valencia, Valencia, Spain. The Associate Editor coordinating the review process was Dr. Dario Petri.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

MCU Tolerance in SRAMs through Low Redundancy Triple Adjacent Error Correction

  • Saiz-Adalid, Luis-J.|||0000-0002-4868-2050
  • Gil, Pedro|||0000-0002-9364-7385
  • Reviriego, Pedro
  • Pontarelli, Salvatore
  • Maestro, Juan Antonio
[EN] Static random access memories (SRAMs) are key in electronic systems. They are used not only as standalone devices, but also embedded in application specific integrated circuits. One key challenge for memories is their susceptibility to radiation-induced soft errors that change the value of memory cells. Error correction codes (ECCs) are commonly used to ensure correct data despite soft errors effects in semiconductor memories. Single error correction/double error detection (SEC-DED) codes have been traditionally the preferred choice for data protection in SRAMs. During the last decade, the percentage of errors that affect more than one memory cell has increased substantially, mainly due to multiple cell upsets (MCUs) caused by radiation. The bits affected by these errors are physically close. To mitigate their effects, ECCs that correct single errors and double adjacent errors have been proposed. These codes, known as single error correction/double adjacent error correction (SEC-DAEC), require the same number of parity bits as traditional SEC-DED codes and a moderate increase in the decoder complexity. However, MCUs are not limited to double adjacent errors, because they affect more bits as technology scales. In this brief, new codes that can correct triple adjacent errors and 3-bit burst errors are presented. They have been implemented using a 45-nm library and compared with previous proposals, showing that our codes have better error protection with a moderate overhead and low redundancy., This work was supported in part by the Universitat Politecnica de Valencia, Valencia, Spain, through the DesTT Research Project under Grant SP20120806; in part by the Spanish Ministry of Science and Education under Project AYA-2009-13300-C03; in part by the Arenes Research Project under Grant TIN2012-38308-C02-01; and in part by the Research Project entitled Manufacturable and Dependable Multicore Architectures at Nanoscale within the framework of COST ICT Action under Grant 1103.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A survey of evaluation platforms for ad hoc routing protocols: a resilience perspective

  • Friginal López, Jesús
  • Martínez Raga, Miquel
  • de-Andrés-Martínez, David|||0000-0002-4744-3795
  • Ruiz, Juan Carlos|||0000-0001-7678-3513
Routing protocols allow for the spontaneous formation of wireless multi-hop networks without dedicated infrastructure, also known as ad hoc networks. Despite significant technological advances, difficulties associated with the evaluation of ad hoc routing protocols under realistic conditions, still hamper their maturation and significant roll out in real world deployments. In particular, the resilience evaluation of ad hoc routing protocols is essential to determine their ability of keeping the routing service working despite the presence of changes, such as accidental faults or malicious ones (attacks). However, the resilience dimension is not always addressed by the evaluation platforms that are in charge of assessing these routing protocols. In this paper, we provide a survey covering current state-of-the-art evaluation platforms in the domain of ad hoc routing protocols paying special attention to the resilience dimension. The goal is threefold. First, we identify the most representative evaluation platforms and the routing protocols they have evaluated. Then, we analyse the experimental methodologies followed by such evaluation platforms. Finally, we create a taxonomy to characterise experimental properties of such evaluation platforms., This work is partially supported by the Spanish Project ARENES (TIN2012-38308-C02-01), the ANR French Project AMORES (ANR-11-INSE-010), and the Intel Doctoral Student Honour Programme 2012.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

The Challenge of Detection and Diagnosis of Fugacious Hardware Faults in VLSI Designs

  • Espinosa García, Jaime
  • de-Andrés-Martínez, David|||0000-0002-4744-3795
  • Ruiz, Juan Carlos|||0000-0001-7678-3513
  • Gil, Pedro|||0000-0002-9364-7385
Current integration scales are increasing the number and types of faults that embedded systems must face. Traditional approaches focus on dealing with those transient and permanent faults that impact the state or output of systems, whereas little research has targeted those faults being logically, electrically or temporally masked -which we have named fugacious. A fast detection and precise diagnosis of faults occurrence, even if the provided service is unaffected, could be of invaluable help to determine, for instance, that systems are currently under the influence of environmental disturbances like radiation, suffering from wear-out, or being affected by an intermittent fault. Upon detection, systems may react to adapt the deployed fault tolerance mechanisms to the diagnosed problem. This paper explores these ideas evaluating challenges and requirements involved, and provides an outline of potential techniques to be applied., This work has been funded by Spanish Ministry of Economy ARENES project (TIN2012-38308-C02-01)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Increasing the Dependability of VLSI Systems Through Early Detection of Fugacious Faults

  • Espinosa García, Jaime
  • de-Andrés-Martínez, David|||0000-0002-4744-3795
  • Gil, Pedro|||0000-0002-9364-7385
Technology advances provide a myriad of advantages for VLSI systems, but also increase the sensitivity of the combinational logic to different fault profiles. Shorter and shorter faults which up to date had been filtered, named as fugacious faults, require new attention as they are considered a feasible sign of warning prior to potential failures. Despite their increasing impact on modern VLSI systems, such faults are not largely considered today by the safety industry. Their early detection is however critical to enable an early evaluation of potential risks for the system and the subsequent deployment of suitable failure avoidance mechanisms. For instance, the early detection of fugacious faults will provide the necessary means to extend the mission time of a system thanks to the temporal avoidance of aging effects. Because classical detection mechanisms are not suited to cope with such fugacious faults, this paper proposes a method specifically designed to detect and diagnose them. Reported experiments will show the feasibility and interest of the proposal., This work has been funded by the Spanish Ministry of Economy ARENES project (TIN2012-38308-C02—01).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Gaining confidence on dependability benchmarks conclusions through back-to-back testing

  • Martínez Raga, Miquel
  • de-Andrés-Martínez, David|||0000-0002-4744-3795
  • Ruiz, Juan Carlos|||0000-0001-7678-3513
The main goal of any benchmark is to guide decisions through system ranking, but surprisingly little research has been focused so far on providing means to gain confidence on the analysis carried out with benchmark results. The inclusion of a back-to-back testing approach in the benchmark analysis process to compare conclusions and gain confidence on the final adopted choices seems convenient to cope with this challenge. The proposal is to look for the coherence of rankings issued from the application of independent multiple-criteria decision making (MCDM) techniques on results. Although any MCDM method can be potentially used, this paper reports our experience using the Logic Score of Preferences (LSP) and the Analytic Hierarchy Process (AHP). Discrepancies in provided rankings invalidate conclusions and must be tracked to discover incoherences and correct the related analysis errors. Once rankings are coherent, the underlying analysis also does, thus increasing our confidence on supplied conclusions., Work partially supported by the Spanish project ARENES (TIN2012-38308-C02-01).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multi-criteria analysis of measures in benchmarking: Dependability benchmarking as a case study

  • Friginal López, Jesús
  • Martínez, Miquel
  • De Andrés, David
  • Ruiz, Juan-Carlos
Benchmarks enable the comparison of computer-based systems attending to a variable set of criteria, such as dependability, security, performance, cost and/or power consumption. It is not despite its difficulty, but rather its mathematical accuracy that multi-criteria analysis of results remains today a subjective process rarely addressed in an explicit way in existing benchmarks. It is thus not surprising that industrial benchmarks only rely on the use of a reduced set of easy-to-understand measures, specially when considering complex systems. This is a way to keep the process of result interpretation straightforward, unambiguous and accurate. However, it limits at the same time the richness and depth of the analysis process. As a result, the academia prefers to characterize complex systems with a wider set of measures. Marrying the requirements of industry and academia in a single proposal remains a challenge today. This paper addresses this question by reducing the uncertainty of the analysis process using quality (score-based) models. At measure definition time, these models make explicit (i) which are the requirements imposed to each type of measure, that may vary from one context of use to another, and (ii) which is the type, and intensity, of the relation between considered measures. At measure analysis time, they provide a consistent, straightforward and unambiguous method to interpret resulting measures. The methodology and its practical use are illustrated through three different case studies from the dependability benchmarking domain, a domain where various different criteria, including both performance and dependability, are typically considered during analysis of benchmark results.. Although the proposed approach is limited to dependability benchmarks in this document, its usefulness for any type of benchmark seems quite evident attending to the general formulation of the provided solution. © 2015 Elsevier Inc. All rights reserved., This work is partially supported by the Spanish project ARENES (TIN2012-38308-C02-01), ANR French project AMORES (ANR-11-INSE-010), the Intel Doctoral Student Honour Programme 2012, and the "Programa de Ayudas de Investigacion y Desarrollo" (PAID) from the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ambient noise in wireless mesh networks: Evaluation and proposal of an adaptive algorithm to mitigate link removal

  • Friginal López, Jesús
  • Bustos Rodríguez, Antonio
  • Ruiz, Juan Carlos|||0000-0001-7678-3513
  • de-Andrés-Martínez, David|||0000-0002-4744-3795
[EN] Ambient noise is one of the major problems in Wireless Mesh Networks (WMNs). It is responsible for adverse effects on communications such as packet dropping, which dramatically affects the behaviour of ad hoc routing protocols ,a key element of these networks. This issue is of prime importance for WMNs since the loss of communication links experienced by nodes may strongly increase the convergence time of the network. Furthermore, the dynamic nature of this problem makes it difficult to address with traditional techniques. The contribution of this paper goes in the direction of (i) exploring this problem by assessing the behaviour of three state-of-the-art routing protocols in the presence of ambient noise (OLSR, B.A.T.M.A.N and Babel) and (ii) improving the resilience capabilities of these protocols against ambient noise by proposing an algorithm for the link quality-based adaptive replication of packets, named LARK. The goal of LARK is to avoid the loss of communication links in the presence of high levels of ambient noise. The effectiveness of the proposal is experimentally assessed, thus establishing a new method to reduce the impact of ambient noise on WMNs., This work is partially supported by the Spanish projects ARENES (TIN2012-38308-C02-01) and SEMSECAP (TIN-2009-13825), the ANR French project AMORES (ANR-11-INSE-010), and the Intel Doctoral Student Honour Programme 2012.