Pasar al contenido principal

TECNICAS DE VISION SELECTIVA EN ENTORNOS NO ESTRUCTURADOS PARA APLICACIONES CON RESTRICCIONES DE TIEMPO REAL

TIN2012-39279

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2012
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Secretaría de Estado de Investigación, Desarrollo e Innovación
Centro beneficiario UNIVERSIDAD POLITÉCNICA DE CARTAGENA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Diseño del software de control de un UUV para monitorización oceanográfica usando un modelo de componentes y framework con despliegue flexible, Design of the control software of a UUV for oceanographic monitoring using a component model and framework with flexible deployment.

  • Ortiz, Francisco
  • Guerrero, Antonio
  • Sánchez Ledesma, Francisco
  • García Córdova, Francisco
  • Alonso, Diego
  • Gilabert, Javier
[EN] Unmanned Underwater Vehicles (UUVs) explore different habitats with a view to protecting and managing them. They are developed to overcome scientific challenges and the engineering problems caused by the unstructured and hazardous underwater environment in which they operate. Their development bears the same difficulties as the rest of service robots (hardware heterogeneity, sensor uncertainty, software complexity, etc.) as well as other particular from the domain, like the underwater environment, energy constraints, and autonomy. This article describes the AEGIR UUV, used as a test bed for implementation of control strategies and oceanographic mission in the Mar Menor area in Spain, which is one of the largest coastal lagoons in Europe. It also describes the development of a tool chain that follows a model-driven approach, which has been used in the design of the vehicle control software as well as a component-based framework that provides the runtime support of the application and enables its flexible deployment in nodes, processes and threads and pre-verification of concurrent behavior., [ES] Los vehículos submarinos no tripulados (Unmanned Underwater Vehicles, UUVs) se diseñan para misiones de monitorización, inspección e intervención. En estudios oceanográficos y de monitorización ambiental son cada vez más demandados por las innumerables ventajas que presentan con respecto a las tecnologías tradicionales. Estos vehículos son desarrollados para superar los retos científicos y los problemas de ingeniería que aparecen en el entorno no estructurado y hostil del fondo marino en el que operan. Su desarrollo no solo conlleva las mismas dificultades que el resto de los robots de servicio (heterogeneidad en el hardware, incertidumbre de los sistemas de medida, complejidad del software, etc.), sino que además se les unen las propias del dominio de aplicación, la robótica submarina: condiciones de iluminación, incertidumbre en cuanto a posición y velocidad, restricciones energéticas, etc. Este artículo describe el UUV AEGIR, un vehículo utilizado como banco de pruebas para la implementación de estrategias de control y misiones oceanográficas. También describe el desarrollo de una cadena de herramientas que sigue un enfoque dirigido por modelos, utilizada en el diseño del software de control del vehículo, así como un framework basado en componentes que proporciona el soporte de ejecución de la aplicación y permite su despliegue flexible en nodos, procesos e hilos y pre-verificación del comportamiento concurrente. Su diseño ha permitido desarrollar, comprobar y añadir los componentes que proporcionan el comportamiento necesario para que el UUV AEGIR pudiera completar con éxito distintos tipos de misiones oceanográficas., Este trabajo ha sido parcialmente financiado por el proyecto financiado por la CICYT del Gobierno Español DIVISAMOS (ref. DPI2009-14744-C03-02) y ViSelTR (ref. TIN2012-39279), así como por el proyecto financiado por la Fundación Séneca de la Región de Murcia MISSION-SICUVA (ref. 15374/PI/10) y el proyecto “Coastal Monitoring System for the Mar Menor Coastal Lagoon (PEPLAN 463.02-08 CLUSTER de la Región de Murcia. Francisco Sánchez Ledesma agradece la financiación recibida por parte del programa de becas FPU del MEC (beca AP2009-5083). Por último, los autores quieren agradecer también a la Armada Española la cesión del vehículo UUV y su posterior ayuda en su reconstrucción.
Repositorio Digital UPCT
Publicación Artículo científico (JournalArticle)

Sensors systems for the automation of operations in the ship repair industry

  • Navarro Lorente, Pedro Javier
  • Suardiaz Muro, Juan
  • Alcover Garau, Pedro María
  • Fernández Isla, Carlos
Hull cleaning before repainting is a key operation in the maintenance of ships. For years, a method to improve such operation has been sought by means of the robotization of techniques such as grit blasting and ultra high pressure water jetting. Despite this, it continues to be standard practice in shipyards that this process is carried out manually because the developed robotized systems are too expensive to be widely accepted by shipyards. We have chosen to apply a more conservative and realistic approach to this problem, which has resulted in the development of several solutions that have been designed with different automation and operation range degrees. These solutions are fitted with most of the elements already available in many shipyards, so the installation of additional machinery in the workplace would not be necessary. This paper describes the evolutionary development of sensor systems for the automation of the preparation process of ship hull surfaces before the painting process is performed. Such evolution has given rise to the development of new technologies for coating removal., This work was funded by the Fifth Framework Programme of the European Commission (EFTCoR Project, ref. GRD2-2001-50004) and by the Spanish National R&D&I Plan (Projects SiLASVer, ref. TRACE PET 2008-0131 and ViSel-TR, ref. TIN2012-39279).
Repositorio Digital UPCT
Publicación Artículo científico (JournalArticle)

Plant phenomics: an overview of image acquisition technologies and image data analysis algorithms

  • Pérez Sanz, Fernando
  • Navarro Lorente, Pedro Javier
  • Egea Gutiérrez-Cortines, Marcos
The study of phenomes or phenomics has been a central part of biology. The field of automatic phenotype acquisition technologies based on images has seen an important advance in the last years. As with other high-throughput technologies, it addresses a common set of problems, including data acquisition and analysis. In this review, we give an overview of the main systems developed to acquire images. We give an in-depth analysis of image processing with its major issues and the algorithms that are being used or emerging as useful to obtain data out of images in an automatic fashion., This work was funded by grants FEDER BFU2013-45148-R, Fundación Séneca 19398/PI/14 to MEC and FEDER ViSelTR (TIN2012-39279) to PJN.
Repositorio Digital UPCT
Publicación Artículo científico (JournalArticle)

Defect detection in textures through the use of entropy as a means for automatically selecting the wavelet decomposition level

  • Navarro Lorente, Pedro Javier
  • Fernández Isla, Carlos
  • Alcover Garau, Pedro María
  • Suardiaz Muro, Juan
This paper presents a robust method for defect detection in textures, entropy-based automatic selection of the wavelet decomposition level (EADL), based on a wavelet reconstruction scheme, for detecting defects in a wide variety of structural and statistical textures. Two main features are presented. One of the new features is an original use of the normalized absolute function value (NABS) calculated from the wavelet coefficients derived at various different decomposition levels in order to identify textures where the defect can be isolated by eliminating the texture pattern in the first decomposition level. The second is the use of Shannon’s entropy, calculated over detail subimages, for automatic selection of the band for image reconstruction, which, unlike other techniques, such as those based on the co-occurrence matrix or on energy calculation, provides a lower decomposition level, thus avoiding excessive degradation of the image, allowing a more accurate defect segmentation. A metric analysis of the results of the proposed method with nine different thresholding algorithms determined that selecting the appropriate thresholding method is important to achieve optimum performance in defect detection. As a consequence, several different thresholding algorithms depending on the type of texture are proposed., The work submitted here has been conducted within the framework of the ViSel-TR project (Selective Computer Vision Techniques for Non-structured Environments, Grant TIN2012-39279) funded by the Spanish government under the National Plan for R&D. This article is the result of the activity carried out under the “Research Programme for Groups of Scientific Excellence at Region of Murcia” of the Seneca Foundation (Agency for Science and Technology of the Region of Murcia—19895/GERM/15).