Pasar al contenido principal

CLUSTERS VIRTUALES ELASTICOS Y MIGRABLES SOBRE INFRAESTRUCTURAS CLOUD HIBRIDAS

TIN2013-44390-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

OMWS: A Web Service Interface for Ecological Niche Modelling

  • Giovanni, Renato de
  • Torres Serrano, Erik
  • Amaral, Rafael B.
  • Rebello, Vinod
  • Canhos, Vanderlei P.
  • Blanquer Espert, Ignacio|||0000-0003-1692-8922
[EN] Ecological niche modelling (ENM) experiments often involve a high number of tasks to be performed. Such tasks may consume a significant amount of computing resources and take a long time to complete, especially when using personal computers. OMWS is a Web service interface that allows more powerful computing back-ends to be remotely exploited by other applications to carry out ENM tasks. Its latest version includes a new operation that can be used to specify complex workflows in a single request, adding the possibility of using workflow management systems on parallel computing back-end. In this paper we describe the OMWS protocol and compare its most recent version with the previous one by running the same ENM experiment using two functionally equivalent clients, each designed for one of the OMWS interface versions. Different back-end configurations were used to investigate how the performance scales for each protocol version when more processing power is made available. Results show that the new version outperforms (in a factor of 2) the previous one when more computing resources are used., The latest version of OMWS contains improvements coming from different sets of requirements originated from two projects that funded their corresponding implementation: EUBrazilOpenBio14, with grants from the European Commission and the National Council for Scientific and Technological Development of Brazil (CNPq) of the Brazilian Ministry of Science and Technology (MCT), and BioVeL, with grants from the European Commission. Server infrastructure was operated through a provisioning system developed in the frame of the Spanish project CLUVIEM (TIN2013-44390-R) funded by the "Ministerio de Economía y Competitividad".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Container-based Virtual Elastic Clusters

  • Alfonso Laguna, Carlos De|||0000-0002-2378-021X
  • Calatrava Arroyo, Amanda|||0000-0002-9018-9171
  • Moltó, Germán|||0000-0002-8049-253X
[EN] eScience demands large-scale computing clusters to support the efficient execution of resource-intensive scientific applications. Virtual Machines (VMs) have introduced the ability to provide customizable execution environments, at the expense of performance loss for applications. However, in recent years, containers have emerged as a light-weight virtualization technology compared to VMs. Indeed, the usage of containers for virtual clusters allows better performance for the applications and fast deployment of additional working nodes, for enhanced elasticity. This paper focuses on the deployment, configuration and management of Virtual Elastic computer Clusters (VEC) dedicated to process scientific workloads. The nodes of the scientific cluster are hosted in containers running on bare-metal machines. The opensource tool Elastic Cluster for Docker (EC4Docker) is introduced, integrated with Docker Swarm to create auto-scaled virtual computer clusters of containers across distributed deployments. We also discuss the benefits and limitations of this solution and analyse the performance of the developed tools under a real scenario by means of a scientific use case that demonstrates the feasibility of the proposed approach., This work has been developed under the support of the program "Ayudas para la contratacion de personal investigador en formacion de catheter predoctoral, programa VALi+d", grant number ACIF/2013/003, from the Conselleria d'Educacio of the Generalitat Valenciana. The authors wish to thank the financial support received form The Spanish Ministry of Economy and Competitiveness to develop the project "CLUVIEM", with reference TIN2013-44390-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Automatic memory-based vertical elasticity and oversubscription on cloud platforms

  • Moltó, Germán|||0000-0002-8049-253X
  • Caballer Fernández, Miguel|||0000-0001-9393-3077
  • Alfonso Laguna, Carlos De|||0000-0002-2378-021X
Hypervisors and Operating Systems support vertical elasticity techniques such as memory ballooning to dynamically assign the memory of Virtual Machines (VMs). However, current Cloud Management Platforms (CMPs), such as OpenNebula or OpenStack, do not currently support dynamic vertical elasticity. This paper describes a system that integrates with the CMP to provide automatic vertical elasticity to adapt the memory size of the VMs to their current memory consumption, featuring live migration to prevent overload scenarios, without downtime for the VMs. This enables an enhanced VM-per-host consolidation ratio while maintaining the Quality of Service for VMs, since their memory is dynamically increased as necessary. The feasibility of the development is assessed via two case studies based on OpenNebula featuring (i) horizontal and vertical elastic virtual clusters on a production Grid infrastructure and (ii) elastic multi-tenant VMs that run Docker containers coupled with live migration techniques. The results show that memory oversubscription can be integrated on CMPs to deliver automatic memory management without severely impacting the performance of the VMs. This results in a memory management framework for on-premises Clouds that features live migration to safely enable transient oversubscription of physical resources in a CMP. © 2015 Elsevier B.V. All rights reserved., The authors would like to thank the Spanish "Ministerio de Economia y Competitividad" for the project CLUVIEM (TIN2013-44390-R) and the European Commission for the project INDIGO-DataCloud with grant number 653549.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Managing Workflows on top of a Cloud Computing Orchestrator for using heterogeneous environments on e-Science

  • Carrión Collado, Abel Antonio
  • Kotowski, Nelson
  • Jardim, Rodrigo
  • Dávila, Alberto M. R.
  • Caballer Fernández, Miguel|||0000-0001-9393-3077
  • Blanquer Espert, Ignacio|||0000-0003-1692-8922
[EN] Scientific workflows (SWFs) are widely used to model processes in e-Science. SWFs are executed by means of workflow management systems (WMSs), which orchestrate the workload on top of computing infrastructures. The advent of cloud computing infrastructures has opened the door of using on-demand infrastructures to complement or even replace local infrastructures. However, new issues have arisen, such as the integration of hybrid resources or the compromise between infrastructure reutilisation and elasticity. In this article, we present an ad hoc solution for managing workflows exploiting the capabilities of cloud orchestrators to deploy resources on demand according to the workload and to combine heterogeneous cloud providers (such as on-premise clouds and public clouds) and traditional infrastructures (clusters) to minimise costs and response time. The work does not propose yet another WMS but demonstrates the benefits of the integration of cloud orchestration when running complex workflows. The article shows several configuration experiments from a realistic comparative genomics workflow called Orthosearch, to migrate memory-intensive workload to public infrastructures while keeping other blocks of the experiment running locally. The article computes running time and cost suggesting best practices., This paper wants to acknowledge the support of the EUBrazilCC project, funded by the European Commission (STREP 614048) and the Brazilian MCT/CNPq N. 13/2012, for the use of its infrastructure. The authors would like also to thank the Spanish 'Ministerio de Economia y Competitividad' for the project 'Clusters Virtuales Elasticos y Migrables sobre Infraestructuras Cloud Hibridas' with reference TIN2013-44390-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Efficient Simulation of Water Distribution Systems using OpenMP

  • Alvarruiz Bermejo, Fernando|||0000-0001-5957-9561
  • Martínez Alzamora, Fernando|||0000-0001-9952-6966
  • Vidal Maciá, Antonio Manuel
[EN] Hydraulic solvers for the simulation of flows and pressures in water distribution systems (WDS) are used extensively, and their computational performance is key when considering optimization problems. This paper presents an approach to speedup the hydrualic solver using OpenMP. The procedure is based on a parallel algorithm for the generation of the linear system of equations. Preliminary results show the validity of the approach., The authors would like to thank the Spanish “Ministerio de Economía y Competitividad” fort he project “Migrable Elastic Virtual Clusters on Hybrid Cloud Infrastructures” (TIN2013-44390-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Self-managed Cost-efficient Virtual Elastic Clusters on Hybrid Cloud Infrastructures

  • Calatrava Arroyo, Amanda|||0000-0002-9018-9171
  • Moltó, Germán|||0000-0002-8049-253X
  • Caballer Fernández, Miguel|||0000-0001-9393-3077
  • Alonso Abalos, José Miguel|||0000-0001-6812-7364
  • Romero Alcalde, Eloy
In this study, we describe the further development of Elastic Cloud Computing Cluster (EC3), a tool for creating self-managed cost-efficient virtual hybrid elastic clusters on top of Infrastructure as a Service (IaaS) clouds. By using spot instances and checkpointing techniques, EC3 can significantly reduce the total execution cost as well as facilitating automatic fault tolerance. Moreover, EC3 can deploy and manage hybrid clusters across on-premises and public cloud resources, thereby introducing cloud bursting capabilities. We present the results of a case study that we conducted to assess the effectiveness of the tool based on the structural dynamic analysis of buildings. In addition, we evaluated the checkpointing algorithms in a real cloud environment with existing workloads to study their effectiveness. The results demonstrate the feasibility and benefits of this type of cluster for computationally intensive applications. © 2016 Elsevier B.V. All rights reserved., This study was supported by the program "Ayudas para la contratacion de personal investigador en formacion de caracter pre doctoral, programa VALi+d" under grant number ACIF/2013/003 from the Conselleria d'Educacio of the Generalitat Valenciana. We are also grateful for financial support received from The Spanish Ministry of Economy and Competitiveness to develop the project "CLUVIEM" under grant reference TIN2013-44390-R. Finally, we express our gratitude to D. David Ruzafa for support with the arduous task of analyzing the executions data.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A platform to deploy customized scientific virtual infrastructures on the cloud

  • Caballer Fernández, Miguel|||0000-0001-9393-3077
  • Segrelles Quilis, José Damián|||0000-0001-5698-7965
  • Moltó, Germán|||0000-0002-8049-253X
  • Blanquer Espert, Ignacio|||0000-0003-1692-8922
This paper presents a software platform to dynamically deploy complex scientific virtual computing infrastructures, on top of Infrastructure as a Service (IaaS) Clouds. The platform orchestrates different services to provision the virtual computing resources. It dynamically installs the appropriate software to satisfy the requirements of a researcher, both on public and on-premise Clouds. The platform provides a web interface to enable the users to easily management of the lifecycle of virtual infrastructures. It enables users to define infrastructures, share them with other users, deploy and relinquish them, add or remove resources dynamically, create and share application recipes, etc. The paper also describes three case studies to deploy complex infrastructures, namely a Hadoop cluster, a single-node to perform NGS sequencing and a gateway for users to access the European Grid Infrastructure (EGI). This platform promotes a better use of on-premise hardware resources of a research center by allocating the computing resources just-in-time to the specific life time of the virtual infrastructures as well as the deployment of the very same infrastructures on a public Cloud., The authors would to thank the Spanish "Ministerio de Economia y Competitividad" for the project "Clusters Virtuales Elasticos y Migrables sobre Infraestructuras Cloud Hibridas" with reference TIN2013-44390-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Análisis y desarrollo de algoritmos de altas prestaciones para reconstrucción de imagen médica TAC 3D basados en la reducción de dosis.

  • CHILLARÓN-PÉREZ, MÓNICA|||0000-0002-7611-8908
[ES] La prueba médica de Tomografía Computarizada (TC) es esencial actualmente en la práctica clínica para el diagnóstico y seguimiento de múltiples enfermedades y lesiones, siendo una de las pruebas de imagen médica más importante por la gran cantidad de información que es capaz de aportar. Sin embargo, a diferencia de otros métodos de diagnóstico por imagen que son inocuos, la prueba de TC utiliza rayos X, que son ionizantes, por lo que suponen un riesgo para los pacientes. Es por ello que es necesario desarrollar métodos que permitan reducir la dosis de radiación a la que se expone a los pacientes que se realizan un estudio, sin comprometer la calidad de imagen puesto que sino se estaría sometiendo a un riesgo a estas personas sin que un diagnóstico de calidad esté garantizado. Durante el desarrollo de esta tesis se han investigado métodos de reconstrucción de imagen TC que se basan en reducir el número de proyecciones usadas, con el objetivo de reducir el tiempo de exposición a los rayos X. Esta estrategia de reducción de dosis está en fase de investigación, a diferencia de otras que están implantadas en la práctica clínica y ya han sido desarrolladas por los propios fabricantes de los escáneres. Por tanto, nos hemos centrado en los llamados métodos algebraicos de reconstrucción, que son los más apropiados para este tipo de adquisición de proyecciones puesto que son capaces de trabajar con menos información que los métodos clásicos conservando una buena calidad de imagen. En concreto, se ha estudiado a fondo el comportamiento del método LSQR para la resolución de este problema, combinado con una técnica de filtrado llamada Soft Thresholding Filter y una técnica de aceleración llamada FISTA. Además, se ha introducido el filtro de imagen Bilateral que es capaz de mejorar la calidad de las imágenes cuando se combina con los métodos anteriores. El estudio multiparamétrico realizado se ha llevado a cabo en un entorno de computación distribuida Grid, para analizar cómo los distintos parámetros que intervienen en el proceso de reconstrucción pueden influir sobre la imagen resultado. Dicho estudio se ha diseñado para hacer uso de la potencia de cómputo de la plataforma distribuida aunque el software que se necesita no esté disponible. La instalación de dicho software se puede realizar en el tiempo de ejecución de los trabajos, o en se puede empaquetar en una imagen que estará instalada en un contenedor Docker, lo que es una opción muy interesante para sistemas donde no tengamos privilegios. El esquema seguido para la creación y lanzamiento de los trabajos es fácilmente reproducible. Por otra parte, se han planteado dos métodos algebraicos directos para la reconstrucción de TC basados en la factorización de la matriz que modela el sistema. El primero es el método SVD, que se ha probado mediante la librería SLEPc, obteniendo mayores tasas de uso de memoria principal, por lo que ha sido descartado en favor del método QR. La primera aproximación a la resolución se ha hecho mediante la librería SuiteSparseQR, desarrollando después un método propio siguiendo la técnica Out-Of-Core que permite almacenar las matrices en el propio disco duro en lugar de cargarlas en memoria, por lo que el tamaño del problema puede aumentar sin que el coste del hardware sea muy alto. Dicho método obtiene reconstrucciones de alta calidad cuando el rango de la matriz factorizada es completo. En los resultados se muestra como para una resolución alta, garantizar el rango completo todavía supone una reducción del número de proyecciones con respecto a métodos tradicionales. Por tanto, en esta tesis se ha llevado a cabo la investigación y el posterior desarrollo mediante librerías y técnicas de computación de Altas Prestaciones de varios métodos algebraicos de reconstrucción de TC basados en la reducción de proyecciones que permiten mantener una buena calidad de imagen. Dichos métodos han sido optimizados para lograr los menores tiempos de reconstrucción posibles, con el fin de hacerlos competitivos y que algún día puedan ser instaurados en la práctica clínica., [CA] Actualment, la prova mèdica de tomografia computeritzada (TC) és essencial en la pràctica clínica per al diagnòstic i el seguiment de múltiples malalties i lesions, sent una de les proves d'imatge mèdica més importants a causa de la gran quantitat d'informació que és capaç d'oferir. Tanmateix, a diferència d'altres mètodes d'imatge médica, la prova CT utilitza raigs X, que són ionitzants i suposen un risc per als pacients. Per això, és necessari desenvolupar mètodes que permetin reduir la dosi de radiació a la qual estan exposats els pacients sotmesos a un estudi, sense comprometre la qualitat de la imatge, ja que en cas contrari estarien sotmetent a aquestes persones a un risc sense que es garantís l'avantatge d'un diagnòstic d'alta qualitat. Durant el desenvolupament d'aquesta tesi, s'han investigat diversos mètodes de reconstrucció d'imatges CT basats en la reducció del nombre de projeccions utilitzades, amb l'objectiu de reduir el temps d'exposició als raigs X. Aquesta estratègia de reducció de dosis es troba en fase investigació, a diferència d'altres que s'implementen a la pràctica clínica i que ja han estat desenvolupades pels propis fabricants d'escàners. Per tant, ens hem centrat en els anomenats mètodes de reconstrucció algebraica, que són els més adequats per a aquest tipus d'adquisició de projecció, ja que són capaços de treballar amb menys informació que els mètodes clàssics mantenint una bona qualitat d'imatge. Concretament, s'ha estudiat a fons el comportament del mètode LSQR per resoldre aquest problema, combinat amb una tècnica de filtratge anomenada Soft Thresholding Filter i una tècnica d'acceleració anomenada FISTA. A més, s'ha introduït un filtre d'imatges anomenat filtre bilateral, que és capaç de millorar la qualitat de les imatges quan es combina amb els mètodes anteriors. L'estudi multiparamètric de LSQR es va dur a terme en un entorn informàtic distribuït Grid, per analitzar com els diferents paràmetres implicats en el procés de reconstrucció poden influir en la imatge resultant. Aquest estudi ha estat dissenyat per fer ús de la potència de càlcul de la plataforma distribuïda encara que el programari requerit no estigui disponible. La instal·lació d'aquest programari es pot fer en el moment d'executar els treballs o es pot empaquetar en una imatge que s'instal·larà en un contenidor Docker, que és una opció molt interessant per a sistemes on no tenim privilegis. L'esquema seguit per a la creació i el llançament dels treballs es pot reproduir fàcilment per a estudis multiparamètrics d'aquest tipus. D'altra banda, s'han proposat dos mètodes algebraics directes per a la reconstrucció CT basats en la factorització de la matriu que modela el sistema. El primer és el mètode SVD, que s'ha provat mitjançant la biblioteca SLEPc, obtenint taxes d'ús més alt de memòria principal, motiu pel qual s'ha descartat a favor del mètode QR. La primera aproximació a la resolució s'ha fet a través de la biblioteca SuiteSparseQR, desenvolupant posteriorment la nostra pròpia implementació mitjançant la tècnica Out-Of-Core que permet emmagatzemar les matrius al disc dur en lloc de carregar-les a la memòria, de manera que la mida de el problema pot augmentar sense que el cost del maquinari sigui molt alt. Aquest mètode obté reconstruccions d'alta qualitat quan el rang de la matriu factoritzada és complet. En els resultats es demostra que per a una alta resolució, garantir el rang complet encara significa una reducció del nombre de projeccions en comparació amb els mètodes tradicionals. Per tant, en aquesta tesi s'ha dut a terme la investigació i el desenvolupament posterior de diversos mètodes de reconstrucció algebraica de CT mitjançant biblioteques i tècniques de computació d'altes prestacions. Aquests mètodes basats en la reducció de projeccions, que permeten mantenir una bona qualitat d’imatge, s’han optimitzat per aconseguir els temps de reconstrucció més breus possibles, per tal de fer-los competitius perquè algun dia puguin implementarse a la pràctica clínica., [EN] The Computerized Tomography (CT) medical test is currently essential in clinical practice for the diagnosis and monitoring of multiple diseases and injuries, being one of the most important medical imaging tests due to the large amount of information it is capable of providing. However, unlike other safe imaging methods, the CT test uses X-rays, which are ionizing, posing a risk to patients. That is why it is necessary to develop methods that allow reducing the radiation dose to which patients undergoing a study are exposed, without compromising image quality since otherwise they would be subjecting these people to a risk without the benefit of a high-quality diagnosis being guaranteed. During the development of this thesis, several CT image reconstruction methods that are based on reducing the number of projections used have been investigated, with the aim of reducing the time of exposure to X-rays. This dose reduction strategy is in research phase, unlike others that are implemented in clinical practice and have already been developed by the scanner manufacturers themselves. Therefore, we have focused on the algebraic reconstruction methods, which are the most appropriate for this type of projection acquisition since they are capable of working with less information than the classical methods while maintaining good image quality. Specifically, the behavior of the LSQR method to solve this problem has been thoroughly studied, combined with a filtering technique called Soft Thresholding Filter and an acceleration technique called FISTA. In addition, the so-called Bilateral filter has been introduced, which is capable of improving the quality of images when combined with the above methods. The multiparametric LSQR study was carried out in a Grid distributed computing environment, to analyze how the different parameters involved in the reconstruction process can influence the resulting image. This study has been designed to make use of the computing power of the distributed platform even if the software required is not available. The installation of said software can be done at the time of execution of the jobs, or it can be packaged in an image that will be installed in a Docker container, which is a very interesting option for systems where we do not have privileges. The scheme followed for the creation and launch of the jobs is easily reproducible for multiparametric studies of this type. On the other hand, two direct algebraic methods have been proposed for CT reconstruction based on the factorization of the matrix that models the system. The first is the SVD method, which has been tested using the SLEPc library, obtaining higher rates of main memory usage, which is why it has been discarded in favor of the QR method. The first approximation to the resolution has been made through the SuiteSparseQR library, later developing our own implementation using the Out-Of-Core technique that allows the matrices to be stored on the hard drive itself instead of loading them in memory, so the size of the problem can increase without the cost of the hardware being very high. This method obtains high-quality reconstructions when the rank of the factored matrix is complete. In the results it is shown that for a high resolution, guaranteeing the full rank still means a reduction in the number of projections compared to traditional methods. Therefore, in this thesis, research and subsequent development of several algebraic CT reconstruction methods has been carried out using libraries and High Performance Computing techniques. These methods based on the reduction of projections, which allows maintaining good image quality, and have been optimized to achieve the shortest possible reconstruction times, in order to make them competitive so that one day they can be implemented in clinical practice., This research has been supported by Universitat Politècnica de València and partially funded by TIN2015-66972-C5-4-R, ENE2014-59442-P-AR and TIN2013-44390-R projects of the "Ministerio de Economía y Competitividad" of Spain, as well as the Spanish ”Generalitat Valenciana” PROMETEOII/2014/008, PROMETEO/2018/035 projects and ACIF/2017/075 predoctoral grant. This work has also been co-financed by FEDER and FSE funds, and the “Spanish Ministry of Science, Innovation and Universities” under Grant RTI2018-098156-B-C54
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Towards migratable elastic virtual clusters on hybrid clouds

  • Calatrava Arroyo, Amanda|||0000-0002-9018-9171
  • Moltó, Germán|||0000-0002-8049-253X
  • Caballer Fernández, Miguel|||0000-0001-9393-3077
  • Alfonso Laguna, Carlos De|||0000-0002-2378-021X
  • Romero Alcalde, Eloy
This paper describes the research work in the context of the CLUVIEM project towards achieving migrat- able, self-managed virtual elastic clusters on hybrid Cloud infrastructures. These virtual clusters can span across on- premises and public Cloud infrastructures thus leveraging hybrid Cloud platforms. They are elastic since working nodes are automatically provisioned and relinquished to dynamically adapt the capacity of the virtual cluster (in terms of number of nodes) according to the current workload. They are self- managed since the elasticity rules are managed via the head node without requiring any external software entity for mon- itoring and deciding when to scale in and out. Finally, they are migratable since they consider both application migration, via application checkpointing, and infrastructure migration, by cloning infrastructures across multi-Clouds. These features introduce unprecedented flexibility for cost-effective cluster- based computing with minimal impact for cluster users. The paper summarises the current state of developments and future roads to achieve this vision., AC would like to thank the program “Ayudas para la contratacion de personal investigador en formaci ´ on´ de carcter predoctoral, programa VALi+d”, grant number ACIF/2013/003, from the Conselleria d’Educacio of the ´ Generalitat Valenciana. Also, the authors would like to thank the Spanish ”Ministerio de Econom´ıa y Competitividad” for the CLUVIEM project with reference TIN2013-44390-R