Pasar al contenido principal

GENERACION, SIMULACION Y VISUALIZACION DE MODELOS 3D A PARTIR DE GRANDES CONJUNTOS DE DATOS. APLICACIONES EN LA MEJORA DE LA CALIDAD DE VIDA DE LAS PERSONAS Y SU ENTORNO

TIN2014-52211-C2-1-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 39
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

De Menos a Distinto: Estudio de la Implantación de R en las Asignaturas del Grado de Estadística

  • Baixeries, Jaume
  • Fairén, Marta
  • Gabarro, Joaquim
  • Pasarella, Edelmira
  • Alcañiz, Manuela
Los cursos de informática en las titulaciones que no son informáticas siempre pecan de falta de motivación y buenos resultados de los estudiantes. El argumento del estudiante acostumbra a ser: ¿A mí para que me servirá todo esto?, y esto se acusa aun más cuando al estudiante le cuestan este tipo de asignaturas. En este artículo analizamos los primeros cursos de informática en el Grado de Estadística de la Universitat de Barcelona (UB) y la Universitat Politècnica de Catalunya (UPC), grado conjunto de las dos universidades. En estos cursos se intentó inicialmente reducir la complejidad de los contenidos para promover mejores resultados pero no funcionó como se esperaba, así que cambiamos de táctica y decidimos modificar las herramientas para adaptarlas a aquellas que los estudiantes entienden que están más cerca de sus intereses. En este caso concreto se decidió usar el lenguaje de programación R, un lenguaje ampliamente utilizado por los estadísticos, para explicarles los conceptos básicos de la programación. Así pues, modificamos nuestra estrategia pasando de menos (contenidos más simples) a distinto (contenidos más elaborados y no triviales adaptados a sus expectativas).
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

From one to many: Simulating groups of agents with reinforcement learning controllers

  • Casadiego, Luiselena
  • Pelechano Gómez, Núria|||0000-0002-1437-245X
Simulation of crowd behavior has been approached through many different methodologies, but the problem of mimicking human decisions and reactions remains a challenge for all. We propose an alternative model for simulation of pedestrian movements using Reinforcement Learning. Taking the approach of microscopic models, we train an agent to move towards a goal while avoiding obstacles. Once one agent has learned, its knowledge is transferred to the rest of the members of the group by sharing the resulting Q-Table. This results in individual behavior leading to emergent group behavior. We present a framework with states, actions and reward functions general enough to easily adapt to different environment configurations., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Mobile graphics: SIGGRAPH Asia 2017 course

  • Agus, Marco
  • Gobbetti, Enrico
  • Marton, Fabio
  • Pintore, Giovanni
  • Vázquez Alcocer, Pere Pau|||0000-0003-4638-4065
Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Interactive inspection of complex multi-object industrial assemblies

  • Argudo Medrano, Óscar|||0000-0003-3943-1839
  • Besora Vilardaga, Isaac
  • Brunet Crosa, Pere|||0000-0001-8406-1975
  • Creus López, Carles
  • Hermosilla Casajús, Pedro
  • Navazo Álvaro, Isabel|||0000-0001-6298-1463
  • Vinacua Pla, Álvaro|||0000-0001-8984-4311
The final publication is available at Springer via http://dx.doi.org/10.1016/j.cad.2016.06.005, The use of virtual prototypes and digital models containing thousands of individual objects is commonplace in complex industrial applications like the cooperative design of huge ships. Designers are interested in selecting and editing specific sets of objects during the interactive inspection sessions. This is however not supported by standard visualization systems for huge models. In this paper we discuss in detail the concept of rendering front in multiresolution trees, their properties and the algorithms that construct the hierarchy and efficiently render it, applied to very complex CAD models, so that the model structure and the identities of objects are preserved. We also propose an algorithm for the interactive inspection of huge models which uses a rendering budget and supports selection of individual objects and sets of objects, displacement of the selected objects and real-time collision detection during these displacements. Our solution–based on the analysis of several existing view-dependent visualization schemes–uses a Hybrid Multiresolution Tree that mixes layers of exact geometry, simplified models and impostors, together with a time-critical, view-dependent algorithm and a Constrained Front. The algorithm has been successfully tested in real industrial environments; the models involved are presented and discussed in the paper., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Error-aware construction and rendering of multi-scan panoramas from massive point clouds

  • Comino Trinidad, Marc|||0000-0001-5621-7565
  • Andújar Gran, Carlos Antonio|||0000-0002-8480-4713
  • Chica Calaf, Antonio|||0000-0003-0270-2332
  • Brunet Crosa, Pere|||0000-0001-8406-1975
Obtaining 3D realistic models of urban scenes from accurate range data is nowadays an important research topic, with applications in a variety of fields ranging from Cultural Heritage and digital 3D archiving to monitoring of public works. Processing massive point clouds acquired from laser scanners involves a number of challenges, from data management to noise removal, model compression and interactive visualization and inspection. In this paper, we present a new methodology for the reconstruction of 3D scenes from massive point clouds coming from range lidar sensors. Our proposal includes a panorama-based compact reconstruction where colors and normals are estimated robustly through an error-aware algorithm that takes into account the variance of expected errors in depth measurements. Our representation supports efficient, GPU-based visualization with advanced lighting effects. We discuss the proposed algorithms in a practical application on urban and historical preservation, described by a massive point cloud of 3.5 billion points. We show that we can achieve compression rates higher than 97% with good visual quality during interactive inspections., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Adaptive transfer functions: improved multiresolution visualization of medical models

  • Díaz García, Jesús
  • Brunet Crosa, Pere|||0000-0001-8406-1975
  • Navazo Álvaro, Isabel|||0000-0001-6298-1463
  • Pérez, Frederic
  • Vázquez Alcocer, Pere Pau|||0000-0003-4638-4065
The final publication is available at Springer via http://dx.doi.org/10.1007/s00371-016-1253-9, Medical datasets are continuously increasing in size. Although larger models may be available for certain research purposes, in the common clinical practice the models are usually of up to 512x512x2000 voxels. These resolutions exceed the capabilities of conventional GPUs, the ones usually found in the medical doctors’ desktop PCs. Commercial solutions typically reduce the data by downsampling the dataset iteratively until it fits the available target specifications. The data loss reduces the visualization quality and this is not commonly compensated with other actions that might alleviate its effects. In this paper, we propose adaptive transfer functions, an algorithm that improves the transfer function in downsampled multiresolution models so that the quality of renderings is highly improved. The technique is simple and lightweight, and it is suitable, not only to visualize huge models that would not fit in a GPU, but also to render not-so-large models in mobile GPUs, which are less capable than their desktop counterparts. Moreover, it can also be used to accelerate rendering frame rates using lower levels of the multiresolution hierarchy while still maintaining high-quality results in a focus and context approach. We also show an evaluation of these results based on perceptual metrics., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

High quality illustrative effects for molecular rendering

  • Hermosilla Casajús, Pedro
  • Guallar, Víctor|||0000-0002-4580-1114
  • Vinacua Pla, Álvaro|||0000-0001-8984-4311
  • Vázquez Alcocer, Pere Pau|||0000-0003-4638-4065
All-atom simulations are crucial in biotechnology. In Pharmacology, for example, molecular knowledge of protein-drug interactions is essential in the understanding of certain pathologies and in the development of improved drugs. To achieve this detailed information, fast and enhanced molecular visualization is critical. Moreover, hardware and software developments quickly deliver extensive data, providing intermediate results that can be analyzed by scientists in order to interact with the simulation process and direct it to a more promising configuration. In this paper we present a GPU-friendly data structure for real-time illustrative visualization of all-atom simulations. Our system generates both ambient occlusion and halos using an occupancy pyramid that needs no precalculation and that is updated on the fly during simulation, allowing the real time rendering of simulation results at sustained high framerates., This work has been supported by the Projects TIN2013-47137-C2-1-P and TIN2014-52211-C2-1-R of the Spanish Ministerio de Economía y Competitividad, and the project 2014-SGR 146 from the Catalan Government., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Real-time molecular visualization supporting diffuse interreflections and ambient occlusion

  • Skanberg, Robin
  • Vázquez Alcocer, Pere Pau|||0000-0003-4638-4065
  • Guallar, Víctor|||0000-0002-4580-1114
  • Ropinski, Timo
Today molecular simulations produce complex data sets capturing the interactions of molecules in detail. Due to the complexity of this time-varying data, advanced visualization techniques are required to support its visual analysis. Current molecular visualization techniques utilize ambient occlusion as a global illumination approximation to improve spatial comprehension. Besides these shadow-like effects, interreflections are also known to improve the spatial comprehension of complex geometric structures. Unfortunately, the inherent computational complexity of interreflections would forbid interactive exploration, which is mandatory in many scenarios dealing with static and time-varying data. In this paper, we introduce a novel analytic approach for capturing interreflections of molecular structures in real-time. By exploiting the knowledge of the underlying space filling representations, we are able to reduce the required parameters and can thus apply symbolic regression to obtain an analytic expression for interreflections. We show how to obtain the data required for the symbolic regression analysis, and how to exploit our analytic solution to enhance interactive molecular visualizations., All static molecules have been obtained from the RCSB Protein Data Bank (http://www.rcsb.org), while the dynamic bind-ing studies have been computed using the PELE Monte Carlo solver (http://pele.bsc.es ) in cooperation with the pharmaceutical company AstraZeneca. This research is partially supported by TIN2014-52211-C2-1-R from the Spanish Government., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Development of general-purpose projection-based augmented reality systems

  • Sunet Pérez, Marc
  • Comino Trinidad, Marc|||0000-0001-5621-7565
  • Karatzas, Dimosthenis
  • Chica Calaf, Antonio|||0000-0003-0270-2332
  • Vázquez Alcocer, Pere Pau|||0000-0003-4638-4065
Despite the large amount of methods and applications of augmented reality, there is little homogenizatio n on the software platforms that support them. An exception may be the low level control software that is provided by some high profile vendors such as Qualcomm and Metaio. However, these provide fine grain modules for e.g. element tracking. We are more co ncerned on the application framework, that includes the control of the devices working together for the development of the AR experience. In this paper we describe the development of a software framework for AR setups. We concentrate on the modular design of the framework, but also on some hard problems such as the calibration stage, crucial for projection - based AR. The developed framework is suitable and has been tested in AR applications using camera - projector pairs, for both fixed and nomadic setups., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Virtual reality to teach anatomy

  • Fairén González, Marta|||0000-0001-7293-584X
  • Farrés, Mariona
  • Moyes Ardiaca, Jordi|||0009-0002-4076-5676
  • Insa, Esther
Virtual Reality (VR) and Augmented Reality (AR) have been gradually introduced in the curriculum of schools given the benefits they bring to classical education. We present an experiment designed to expose students to a VR session where they can directly inspect 3D models of several human organs by using Virtual Reality systems. Our systems allow the students to see the models directly visualized in 3D and to interact with them as if they were real. The experiment has involved 254 students of a Nursing Degree, enrolled in the Human anatomy and physiology course during 2 years (2 consecutive courses). It includes 10 3D models representing different anatomical structures which have been enhanced with meta-data to help the students understand the structure. In order to evaluate the students' satisfaction facing such a new teaching methodology, the students were asked to fill in a questionnaire with two categories. The first one measured whether or not, the teaching session using VR facilitates the understanding of the structures. The second one measured the student's satisfaction with this VR session. From the results we can see that the items most valuated are the use of the activity as a learning tool, and the satisfaction of the students' expectations. We can therefore conclude that VR session for teaching is a powerful learning tool that helps to understand the anatomical structures., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

A comparative study of navigation meshes

  • Van Toll, Wouter
  • Triesscheijn, Roy
  • Kallmann, Marcello
  • Oliva Martínez, Ramon
  • Pelechano Gómez, Núria|||0000-0002-1437-245X
  • Pettré, Julien
  • Geraerts, Roland
A navigation mesh is a representation of a 2D or 3D virtual environment that enables path planning and crowd simulation for walking characters. Various state-of-the-art navigation meshes exist, but there is no standardized way of evaluating or comparing them. Each implementation is in a different state of maturity, has been tested on different hardware, uses different example environments, and may have been designed with a different application in mind. In this paper, we conduct the first comparative study of navigation meshes. First, we give general definitions of 2D and 3D environments and navigation meshes. Second, we propose theoretical properties by which navigation meshes can be classified. Third, we introduce metrics by which the quality of a navigation mesh implementation can be measured objectively. Finally, we use these metrics to compare various state-of-the-art navigation meshes in a range of 2D and 3D environments. We expect that this work will set a new standard for the evaluation of navigation meshes, that it will help developers choose an appropriate navigation mesh for their application, and that it will steer future research on navigation meshes in interesting directions., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Improving perception of molecular surface visualizations by incorporating translucency effects

  • Hermosilla Casajús, Pedro
  • Maisch, Sebastian
  • Vázquez Alcocer, Pere Pau|||0000-0003-4638-4065
  • Ropinski, Timo
Molecular surfaces are a commonly used representation in the analysis of molecular structures as they provide a compact description of the space occupied by a molecule and its accessibility. However, due to the high abstraction of the atomic data, fine grain features are hard to identify. Moreover, these representations involve a high degree of occlusions, which prevents the identification of internal features and potentially impacts shape perception. In this paper, we present a set of techniques which are inspired by the properties of translucent materials, that have been developed to improve the perception of molecular surfaces: First, we introduce an interactive algorithm to simulate subsurface scattering for molecular surfaces, in order to improve the thickness perception of the molecule. Second, we present a technique to visualize structures just beneath the surface, by still conveying relevant depth information. And lastly, we introduce reflections and refractions into our visualization that improve the shape perception of molecular surfaces. We evaluate the benefits of these methods through crowd-sourced user studies as well as the feedback from several domain experts., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Interactive GPU-based generation of solvent-excluded surfaces

  • Hermosilla, Pedro
  • Krone, Michael
  • Guallar, Víctor|||0000-0002-4580-1114
  • Vázquez, Pere-Pau
  • Vinacua Pla, Álvaro|||0000-0001-8984-4311
  • Ropinski, Timo
The solvent-excluded surface (SES) is a popular molecular representation that gives the boundary of the molecular volume with respect to a specific solvent. SESs depict which areas of a molecule are accessible by a specific solvent, which is represented as a spherical probe. Despite the popularity of SESs, their generation is still a compute-intensive process, which is often performed in a preprocessing stage prior to the actual rendering (except for small models). For dynamic data or varying probe radii, however, such a preprocessing is not feasible as it prevents interactive visual analysis. Thus, we present a novel approach for the on-the-fly generation of SESs, a highly parallelizable, grid-based algorithm where the SES is rendered using ray-marching. By exploiting modern GPUs, we are able to rapidly generate SESs directly within the mapping stage of the visualization pipeline. Our algorithm can be applied to large time-varying molecules and is scalable, as it can progressively refine the SES if GPU capabilities are insufficient. In this paper, we show how our algorithm is realized and how smooth transitions are achieved during progressive refinement. We further show visual results obtained from real-world data and discuss the performance obtained, which improves upon previous techniques in both the size of the molecules that can be handled and the resulting frame rate., This work has been partially supported by grant TIN2014-52211-C2-1-R and grant CTQ2016-79138-R from the Spanish Ministerio de Economía y Competitividad with FEDER funds, and by the German Research Foundation (DFG) as part of Collaborative Research Center SFB 716., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Mobile graphics

  • Agus, Marco
  • Gobbetti, Enrico
  • Marton, Fabio
  • Pintore, Giovanni
  • Vázquez Alcocer, Pere Pau|||0000-0003-4638-4065
The increased availability and performance of mobile graphics terminals, including smartphones and tablets with high resolution screens and powerful GPUs, combined with the increased availability of high-speed mobile data connections, is opening the door to a variety of networked graphics applications. In this world, native apps or mobile sites coexist to reach the goal of providing us access to a wealth of multimedia information while we are on the move. This half-day tutorial provides a technical introduction to the mobile graphics world spanning the hardware-software spectrum, and explores the state of the art and key advances in specific application domains, including capture and acquisition, real-time high-quality 3D rendering and interactive exploration., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Downsampling methods for medical datasets

  • Díaz García, Jesús
  • Brunet Crosa, Pere|||0000-0001-8406-1975
  • Navazo Álvaro, Isabel|||0000-0001-6298-1463
  • Vázquez Alcocer, Pere Pau|||0000-0003-4638-4065
Volume visualization software usually has to deal with datasets that are larger than the GPUs may hold. This is especially true in one of the most popular application scenarios: medical visualization. Typically, medical datasets are available for different personnel, but only radiologists have high-end systems that are able to cope with large data. For the rest of physicians, usually low-end systems are only available. As a result, most volume rendering packages downsample the data prior to uploading to the GPU. The most common approach consists in performing iterative subsampling along the longest axis, until the model fits inside the GPU memory. This causes important information loss that affects the final rendering. Some cleverer techniques may be developed to preserve the volumetric information. In this paper we explore the quality of different downsampling methods and present a new approach that produces smooth lower-resolution representations, yet still preserves small features that are prone to disappear with other approaches., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Visual analysis of protein-ligand interactions

  • Vázquez Alcocer, Pere Pau|||0000-0003-4638-4065
  • Hermosilla Casajús, Pedro
  • Guallar, Víctor|||0000-0002-4580-1114
  • Estrada, Jorge
  • Vinacua Pla, Álvaro|||0000-0001-8984-4311
The analysis of protein-ligand interactions is complex because of the many factors at play. Most current methods for visual analysis provide this information in the form of simple 2D plots, which, besides being quite space hungry, often encode a low number of different properties. In this paper we present a system for compact 2D visualization of molecular simulations. It purposely omits most spatial information and presents physical information associated to single molecular components and their pairwise interactions through a set of 2D InfoVis tools with coordinated views, suitable interaction, and focus+context techniques to analyze large amounts of data. The system provides a wide range of motifs for elements such as protein secondary structures or hydrogen bond networks, and a set of tools for their interactive inspection, both for a single simulation and for comparing two different simulations. As a result, the analysis of protein-ligand interactions of Molecular Simulation trajectories is greatly facilitated., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Semi-automatic colonic content analysis for diagnostic

  • Ceballos Inza, Víctor
  • Monclús Lahoya, Eva|||0000-0002-9645-0510
  • Vázquez Alcocer, Pere Pau|||0000-0003-4638-4065
  • Bendezú García, Álvaro
  • Mego, Marianela
  • Merino, Xavier
  • Azpiroz Vidaur, Fernando
  • Navazo Álvaro, Isabel|||0000-0001-6298-1463
The analysis of the morphology and content of the gut is necessary in order to understand metabolic and functional gut activity and for diagnostic purposes. Magnetic resonance imaging (MRI) has become an important modality technique since it is able to visualize soft tissues using no ionizing radiation, and hence removes the need for any contrast agents. In the last few years, MRI of gastrointestinal function has advanced substantially, although scarcely any publication has been devoted to the analysis of the colon content. This paper presents a semi-automatic segmentation tool for the quantitative assessment of the unprepared colon from MRI images. This application has allowed for the analysis of the colon content in various clinical experiments. The results of the assessment have contributed to a better understanding of the functionality of the colon under different diet conditions. The last experiment carried out by medical doctors showed a marked influence of diet on colonic content, accounting for about 30% of the volume variations., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Downsampling and storage of pre-computed gradients for volume rendering

  • Díaz García, Jesús
  • Brunet Crosa, Pere|||0000-0001-8406-1975
  • Navazo Álvaro, Isabel|||0000-0001-6298-1463
  • Vázquez Alcocer, Pere Pau|||0000-0003-4638-4065
The way in which gradients are computed in volume datasets influences both the quality of the shading and the performance obtained in rendering algorithms. In particular, the visualization of coarse datasets in multi-resolution representations is affected when gradients are evaluated on-the-fly in the shader code by accessing neighbouring positions. This is not only a costly computation that compromises the performance of the visualization process, but also one that provides gradients of low quality that do not resemble the originals as much as desired because of the new topology of downsampled datasets. An obvious solution is to pre-compute the gradients and store them. Unfortunately, this originates two problems: First, the downsampling process, that is also prone to generate artifacts. Second, the limited bit size of storage itself causes the gradients to loss precision. In order to solve these issues, we propose a downsampling filter for pre-computed gradients that provides improved gradients that better match the originals such that the aforementioned artifacts disappear. Secondly, to address the storage problem, we present a method for the efficient storage of gradient directions that is able to minimize the minimum angle achieved among all representable vectors in a space of 3 bytes. We also provide several examples that show the advantages of the proposed approaches., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Physics-Based Visual Characterization of Molecular Interaction Forces

  • Hermosilla, Pedro
  • Estrada, Jorge
  • Guallar, Víctor|||0000-0002-4580-1114
  • Ropinski, Timo
  • Vinacua, Álvar
  • Vázquez, Pere-Pau
Molecular design procedures, such as drug design and protein engineering’ are complex processes, largely benefiting from computational resources but also from human analysis. In drug design, for example, a costly iterative loop involves simulations requiring long computation times, followed by a data analysis phase, which is conducted by domain scientists using numerical analysis and visualization tools. Once some clues favoring or hindering binding have been understood, the ligand is modified by taking into account these clues, and another iteration is performed. In typical cases, computer simulation times range from hours to weeks, depending on the complexity of the molecules and the methods used. Recent advances have led to a reduction in computation time by exploiting modern supercomputers [7] in combination with modern simulation algorithms [33]. These advances in parallel computation thus allow for the computation of many simulation paths at the same time. This increase in available data also implies that the requirements for analysis tools become more demanding., This project has been supported by TIN2014-52211-C2-1-R by the Spanish Ministerio de Economía y Competitividad with EU FEDER funds. We thank EAPM group members (BSC) and especially Sandra Acebes, for help in data preparation., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Progressive ray casting for volumetric models on mobile devices

  • Díaz García, Jesús
  • Brunet Crosa, Pere|||0000-0001-8406-1975
  • Navazo Álvaro, Isabel|||0000-0001-6298-1463
  • Vázquez Alcocer, Pere Pau|||0000-0003-4638-4065
Mobile devices have experienced an incredible market penetration in the last decade. Currently, medium to premium smartphones are relatively affordable devices. With the increase in screen size and resolution, together with the improvements in performance of mobile CPUs and GPUs, more tasks have become possible. In this paper we explore the rendering of medium to large volumetric models on mobile and low performance devices in general. To do so, we present a progressive ray casting method that is able to obtain interactive frame rates and high quality results for models that not long ago were only supported by desktop computers., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Downsampling and storage of pre-computed gradients for volume rendering

  • Díaz García, Jesús
  • Brunet Crosa, Pere
  • Navazo Álvaro, Isabel
  • Vázquez Alcocer, Pere Pau
The way in which gradients are computed in volume datasets influences both the quality of the shading and the performance obtained in rendering algorithms. In particular, the visualization of coarse datasets in multi-resolution representations is affected when gradients are evaluated on-the-fly in the shader code by accessing neighbouring positions. This is not only a costly computation that compromises the performance of the visualization process, but also one that provides gradients of low quality that do not resemble the originals as much as desired because of the new topology of downsampled datasets. An obvious solution is to pre-compute the gradients and store them. Unfortunately, this originates two problems: First, the downsampling process, that is also prone to generate artifacts. Second, the limited bit size of storage itself causes the gradients to loss precision. In order to solve these issues, we propose a downsampling filter for pre-computed gradients that provides improved gradients that better match the originals such that the aforementioned artifacts disappear. Secondly, to address the storage problem, we present a method for the efficient storage of gradient directions that is able to minimize the minimum angle achieved among all representable vectors in a space of 3 bytes. We also provide several examples that show the advantages of the proposed approaches., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Visual analysis of protein-ligand interactions

  • Vázquez Alcocer, Pere Pau
  • Hermosilla Casajús, Pedro
  • Guallar, Víctor
  • Estrada, Jorge
  • Vinacua Pla, Álvaro
The analysis of protein-ligand interactions is complex because of the many factors at play. Most current methods for visual analysis provide this information in the form of simple 2D plots, which, besides being quite space hungry, often encode a low number of different properties. In this paper we present a system for compact 2D visualization of molecular simulations. It purposely omits most spatial information and presents physical information associated to single molecular components and their pairwise interactions through a set of 2D InfoVis tools with coordinated views, suitable interaction, and focus+context techniques to analyze large amounts of data. The system provides a wide range of motifs for elements such as protein secondary structures or hydrogen bond networks, and a set of tools for their interactive inspection, both for a single simulation and for comparing two different simulations. As a result, the analysis of protein-ligand interactions of Molecular Simulation trajectories is greatly facilitated., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

High quality illustrative effects for molecular rendering

  • Hermosilla Casajús, Pedro
  • Guallar, Víctor
  • Vinacua Pla, Álvaro
  • Vázquez Alcocer, Pere Pau
All-atom simulations are crucial in biotechnology. In Pharmacology, for example, molecular knowledge of protein-drug interactions is essential in the understanding of certain pathologies and in the development of improved drugs. To achieve this detailed information, fast and enhanced molecular visualization is critical. Moreover, hardware and software developments quickly deliver extensive data, providing intermediate results that can be analyzed by scientists in order to interact with the simulation process and direct it to a more promising configuration. In this paper we present a GPU-friendly data structure for real-time illustrative visualization of all-atom simulations. Our system generates both ambient occlusion and halos using an occupancy pyramid that needs no precalculation and that is updated on the fly during simulation, allowing the real time rendering of simulation results at sustained high framerates., This work has been supported by the Projects TIN2013-47137-C2-1-P and TIN2014-52211-C2-1-R of the Spanish Ministerio de Economía y Competitividad, and the project 2014-SGR 146 from the Catalan Government., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Downsampling methods for medical datasets

  • Díaz García, Jesús
  • Brunet Crosa, Pere
  • Navazo Álvaro, Isabel
  • Vázquez Alcocer, Pere Pau
Volume visualization software usually has to deal with datasets that are larger than the GPUs may hold. This is especially true in one of the most popular application scenarios: medical visualization. Typically, medical datasets are available for different personnel, but only radiologists have high-end systems that are able to cope with large data. For the rest of physicians, usually low-end systems are only available. As a result, most volume rendering packages downsample the data prior to uploading to the GPU. The most common approach consists in performing iterative subsampling along the longest axis, until the model fits inside the GPU memory. This causes important information loss that affects the final rendering. Some cleverer techniques may be developed to preserve the volumetric information. In this paper we explore the quality of different downsampling methods and present a new approach that produces smooth lower-resolution representations, yet still preserves small features that are prone to disappear with other approaches., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Physics-Based Visual Characterization of Molecular Interaction Forces

  • Hermosilla, Pedro
  • Estrada, Jorge
  • Guallar, Víctor
  • Ropinski, Timo
  • Vinacua, Álvar
  • Vázquez, Pere-Pau
Molecular design procedures, such as drug design and protein engineering’ are complex processes, largely benefiting from computational resources but also from human analysis. In drug design, for example, a costly iterative loop involves simulations requiring long computation times, followed by a data analysis phase, which is conducted by domain scientists using numerical analysis and visualization tools. Once some clues favoring or hindering binding have been understood, the ligand is modified by taking into account these clues, and another iteration is performed. In typical cases, computer simulation times range from hours to weeks, depending on the complexity of the molecules and the methods used. Recent advances have led to a reduction in computation time by exploiting modern supercomputers [7] in combination with modern simulation algorithms [33]. These advances in parallel computation thus allow for the computation of many simulation paths at the same time. This increase in available data also implies that the requirements for analysis tools become more demanding., This project has been supported by TIN2014-52211-C2-1-R by the Spanish Ministerio de Economía y Competitividad with EU FEDER funds. We thank EAPM group members (BSC) and especially Sandra Acebes, for help in data preparation., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Adaptive transfer functions: improved multiresolution visualization of medical models

  • Díaz García, Jesús
  • Brunet Crosa, Pere
  • Navazo Álvaro, Isabel
  • Pérez, Frederic
  • Vázquez Alcocer, Pere Pau
The final publication is available at Springer via http://dx.doi.org/10.1007/s00371-016-1253-9, Medical datasets are continuously increasing in size. Although larger models may be available for certain research purposes, in the common clinical practice the models are usually of up to 512x512x2000 voxels. These resolutions exceed the capabilities of conventional GPUs, the ones usually found in the medical doctors’ desktop PCs. Commercial solutions typically reduce the data by downsampling the dataset iteratively until it fits the available target specifications. The data loss reduces the visualization quality and this is not commonly compensated with other actions that might alleviate its effects. In this paper, we propose adaptive transfer functions, an algorithm that improves the transfer function in downsampled multiresolution models so that the quality of renderings is highly improved. The technique is simple and lightweight, and it is suitable, not only to visualize huge models that would not fit in a GPU, but also to render not-so-large models in mobile GPUs, which are less capable than their desktop counterparts. Moreover, it can also be used to accelerate rendering frame rates using lower levels of the multiresolution hierarchy while still maintaining high-quality results in a focus and context approach. We also show an evaluation of these results based on perceptual metrics., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Improving perception of molecular surface visualizations by incorporating translucency effects

  • Hermosilla Casajús, Pedro
  • Maisch, Sebastian
  • Vázquez Alcocer, Pere Pau
  • Ropinski, Timo
Molecular surfaces are a commonly used representation in the analysis of molecular structures as they provide a compact description of the space occupied by a molecule and its accessibility. However, due to the high abstraction of the atomic data, fine grain features are hard to identify. Moreover, these representations involve a high degree of occlusions, which prevents the identification of internal features and potentially impacts shape perception. In this paper, we present a set of techniques which are inspired by the properties of translucent materials, that have been developed to improve the perception of molecular surfaces: First, we introduce an interactive algorithm to simulate subsurface scattering for molecular surfaces, in order to improve the thickness perception of the molecule. Second, we present a technique to visualize structures just beneath the surface, by still conveying relevant depth information. And lastly, we introduce reflections and refractions into our visualization that improve the shape perception of molecular surfaces. We evaluate the benefits of these methods through crowd-sourced user studies as well as the feedback from several domain experts., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

From one to many: Simulating groups of agents with reinforcement learning controllers

  • Casadiego, Luiselena
  • Pelechano Gómez, Núria
Simulation of crowd behavior has been approached through many different methodologies, but the problem of mimicking human decisions and reactions remains a challenge for all. We propose an alternative model for simulation of pedestrian movements using Reinforcement Learning. Taking the approach of microscopic models, we train an agent to move towards a goal while avoiding obstacles. Once one agent has learned, its knowledge is transferred to the rest of the members of the group by sharing the resulting Q-Table. This results in individual behavior leading to emergent group behavior. We present a framework with states, actions and reward functions general enough to easily adapt to different environment configurations., Peer Reviewed, Postprint (author’s final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Virtual reality to teach anatomy

  • Fairén González, Marta
  • Farrés, Mariona
  • Moyes Ardiaca, Jordi
  • Insa, Esther
Virtual Reality (VR) and Augmented Reality (AR) have been gradually introduced in the curriculum of schools given the benefits they bring to classical education. We present an experiment designed to expose students to a VR session where they can directly inspect 3D models of several human organs by using Virtual Reality systems. Our systems allow the students to see the models directly visualized in 3D and to interact with them as if they were real. The experiment has involved 254 students of a Nursing Degree, enrolled in the Human anatomy and physiology course during 2 years (2 consecutive courses). It includes 10 3D models representing different anatomical structures which have been enhanced with meta-data to help the students understand the structure. In order to evaluate the students' satisfaction facing such a new teaching methodology, the students were asked to fill in a questionnaire with two categories. The first one measured whether or not, the teaching session using VR facilitates the understanding of the structures. The second one measured the student's satisfaction with this VR session. From the results we can see that the items most valuated are the use of the activity as a learning tool, and the satisfaction of the students' expectations. We can therefore conclude that VR session for teaching is a powerful learning tool that helps to understand the anatomical structures., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Real-time molecular visualization supporting diffuse interreflections and ambient occlusion

  • Skanberg, Robin
  • Vázquez Alcocer, Pere Pau
  • Guallar, Víctor
  • Ropinski, Timo
Today molecular simulations produce complex data sets capturing the interactions of molecules in detail. Due to the complexity of this time-varying data, advanced visualization techniques are required to support its visual analysis. Current molecular visualization techniques utilize ambient occlusion as a global illumination approximation to improve spatial comprehension. Besides these shadow-like effects, interreflections are also known to improve the spatial comprehension of complex geometric structures. Unfortunately, the inherent computational complexity of interreflections would forbid interactive exploration, which is mandatory in many scenarios dealing with static and time-varying data. In this paper, we introduce a novel analytic approach for capturing interreflections of molecular structures in real-time. By exploiting the knowledge of the underlying space filling representations, we are able to reduce the required parameters and can thus apply symbolic regression to obtain an analytic expression for interreflections. We show how to obtain the data required for the symbolic regression analysis, and how to exploit our analytic solution to enhance interactive molecular visualizations., All static molecules have been obtained from the RCSB Protein Data Bank (http://www.rcsb.org), while the dynamic bind-ing studies have been computed using the PELE Monte Carlo solver (http://pele.bsc.es ) in cooperation with the pharmaceutical company AstraZeneca. This research is partially supported by TIN2014-52211-C2-1-R from the Spanish Government., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Semi-automatic colonic content analysis for diagnostic

  • Ceballos Inza, Víctor
  • Monclús Lahoya, Eva
  • Vázquez Alcocer, Pere Pau
  • Bendezú García, Álvaro
  • Mego, Marianela
  • Merino, Xavier
  • Azpiroz Vidaur, Fernando
  • Navazo Álvaro, Isabel
The analysis of the morphology and content of the gut is necessary in order to understand metabolic and functional gut activity and for diagnostic purposes. Magnetic resonance imaging (MRI) has become an important modality technique since it is able to visualize soft tissues using no ionizing radiation, and hence removes the need for any contrast agents. In the last few years, MRI of gastrointestinal function has advanced substantially, although scarcely any publication has been devoted to the analysis of the colon content. This paper presents a semi-automatic segmentation tool for the quantitative assessment of the unprepared colon from MRI images. This application has allowed for the analysis of the colon content in various clinical experiments. The results of the assessment have contributed to a better understanding of the functionality of the colon under different diet conditions. The last experiment carried out by medical doctors showed a marked influence of diet on colonic content, accounting for about 30% of the volume variations., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

A comparative study of navigation meshes

  • Van Toll, Wouter
  • Triesscheijn, Roy
  • Kallmann, Marcello
  • Oliva Martínez, Ramon
  • Pelechano Gómez, Núria
  • Pettré, Julien
  • Geraerts, Roland
A navigation mesh is a representation of a 2D or 3D virtual environment that enables path planning and crowd simulation for walking characters. Various state-of-the-art navigation meshes exist, but there is no standardized way of evaluating or comparing them. Each implementation is in a different state of maturity, has been tested on different hardware, uses different example environments, and may have been designed with a different application in mind. In this paper, we conduct the first comparative study of navigation meshes. First, we give general definitions of 2D and 3D environments and navigation meshes. Second, we propose theoretical properties by which navigation meshes can be classified. Third, we introduce metrics by which the quality of a navigation mesh implementation can be measured objectively. Finally, we use these metrics to compare various state-of-the-art navigation meshes in a range of 2D and 3D environments. We expect that this work will set a new standard for the evaluation of navigation meshes, that it will help developers choose an appropriate navigation mesh for their application, and that it will steer future research on navigation meshes in interesting directions., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Interactive inspection of complex multi-object industrial assemblies

  • Argudo Medrano, Óscar
  • Besora Vilardaga, Isaac
  • Brunet Crosa, Pere
  • Creus López, Carles
  • Hermosilla Casajús, Pedro
  • Navazo Álvaro, Isabel
  • Vinacua Pla, Álvaro
The final publication is available at Springer via http://dx.doi.org/10.1016/j.cad.2016.06.005, The use of virtual prototypes and digital models containing thousands of individual objects is commonplace in complex industrial applications like the cooperative design of huge ships. Designers are interested in selecting and editing specific sets of objects during the interactive inspection sessions. This is however not supported by standard visualization systems for huge models. In this paper we discuss in detail the concept of rendering front in multiresolution trees, their properties and the algorithms that construct the hierarchy and efficiently render it, applied to very complex CAD models, so that the model structure and the identities of objects are preserved. We also propose an algorithm for the interactive inspection of huge models which uses a rendering budget and supports selection of individual objects and sets of objects, displacement of the selected objects and real-time collision detection during these displacements. Our solution–based on the analysis of several existing view-dependent visualization schemes–uses a Hybrid Multiresolution Tree that mixes layers of exact geometry, simplified models and impostors, together with a time-critical, view-dependent algorithm and a Constrained Front. The algorithm has been successfully tested in real industrial environments; the models involved are presented and discussed in the paper., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Interactive GPU-based generation of solvent-excluded surfaces

  • Hermosilla, Pedro
  • Krone, Michael
  • Guallar, Víctor
  • Vázquez, Pere-Pau
  • Vinacua Pla, Álvaro
  • Ropinski, Timo
The solvent-excluded surface (SES) is a popular molecular representation that gives the boundary of the molecular volume with respect to a specific solvent. SESs depict which areas of a molecule are accessible by a specific solvent, which is represented as a spherical probe. Despite the popularity of SESs, their generation is still a compute-intensive process, which is often performed in a preprocessing stage prior to the actual rendering (except for small models). For dynamic data or varying probe radii, however, such a preprocessing is not feasible as it prevents interactive visual analysis. Thus, we present a novel approach for the on-the-fly generation of SESs, a highly parallelizable, grid-based algorithm where the SES is rendered using ray-marching. By exploiting modern GPUs, we are able to rapidly generate SESs directly within the mapping stage of the visualization pipeline. Our algorithm can be applied to large time-varying molecules and is scalable, as it can progressively refine the SES if GPU capabilities are insufficient. In this paper, we show how our algorithm is realized and how smooth transitions are achieved during progressive refinement. We further show visual results obtained from real-world data and discuss the performance obtained, which improves upon previous techniques in both the size of the molecules that can be handled and the resulting frame rate., This work has been partially supported by grant TIN2014-52211-C2-1-R and grant CTQ2016-79138-R from the Spanish Ministerio de Economía y Competitividad with FEDER funds, and by the German Research Foundation (DFG) as part of Collaborative Research Center SFB 716., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Development of general-purpose projection-based augmented reality systems

  • Sunet Pérez, Marc
  • Comino Trinidad, Marc
  • Karatzas, Dimosthenis
  • Chica Calaf, Antonio
  • Vázquez Alcocer, Pere Pau
Despite the large amount of methods and applications of augmented reality, there is little homogenizatio n on the software platforms that support them. An exception may be the low level control software that is provided by some high profile vendors such as Qualcomm and Metaio. However, these provide fine grain modules for e.g. element tracking. We are more co ncerned on the application framework, that includes the control of the devices working together for the development of the AR experience. In this paper we describe the development of a software framework for AR setups. We concentrate on the modular design of the framework, but also on some hard problems such as the calibration stage, crucial for projection - based AR. The developed framework is suitable and has been tested in AR applications using camera - projector pairs, for both fixed and nomadic setups., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Mobile graphics

  • Agus, Marco
  • Gobbetti, Enrico
  • Marton, Fabio
  • Pintore, Giovanni
  • Vázquez Alcocer, Pere Pau
The increased availability and performance of mobile graphics terminals, including smartphones and tablets with high resolution screens and powerful GPUs, combined with the increased availability of high-speed mobile data connections, is opening the door to a variety of networked graphics applications. In this world, native apps or mobile sites coexist to reach the goal of providing us access to a wealth of multimedia information while we are on the move. This half-day tutorial provides a technical introduction to the mobile graphics world spanning the hardware-software spectrum, and explores the state of the art and key advances in specific application domains, including capture and acquisition, real-time high-quality 3D rendering and interactive exploration., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Error-aware construction and rendering of multi-scan panoramas from massive point clouds

  • Comino Trinidad, Marc
  • Andújar Gran, Carlos Antonio
  • Chica Calaf, Antonio
  • Brunet Crosa, Pere
Obtaining 3D realistic models of urban scenes from accurate range data is nowadays an important research topic, with applications in a variety of fields ranging from Cultural Heritage and digital 3D archiving to monitoring of public works. Processing massive point clouds acquired from laser scanners involves a number of challenges, from data management to noise removal, model compression and interactive visualization and inspection. In this paper, we present a new methodology for the reconstruction of 3D scenes from massive point clouds coming from range lidar sensors. Our proposal includes a panorama-based compact reconstruction where colors and normals are estimated robustly through an error-aware algorithm that takes into account the variance of expected errors in depth measurements. Our representation supports efficient, GPU-based visualization with advanced lighting effects. We discuss the proposed algorithms in a practical application on urban and historical preservation, described by a massive point cloud of 3.5 billion points. We show that we can achieve compression rates higher than 97% with good visual quality during interactive inspections., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Progressive ray casting for volumetric models on mobile devices

  • Díaz García, Jesús
  • Brunet Crosa, Pere
  • Navazo Álvaro, Isabel
  • Vázquez Alcocer, Pere Pau
Mobile devices have experienced an incredible market penetration in the last decade. Currently, medium to premium smartphones are relatively affordable devices. With the increase in screen size and resolution, together with the improvements in performance of mobile CPUs and GPUs, more tasks have become possible. In this paper we explore the rendering of medium to large volumetric models on mobile and low performance devices in general. To do so, we present a progressive ray casting method that is able to obtain interactive frame rates and high quality results for models that not long ago were only supported by desktop computers., Peer Reviewed, Postprint (author's final draft)