Pasar al contenido principal

CODISEÑO DE SISTEMAS DE CONTROL CON CRITICIDAD MIXTA BASADO EN MISIONES

TIN2014-56158-C4-4-P

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Rejection of mismatched disturbances for systems with input delay via a predictive extended state observer

  • Sanz Diaz, Ricardo
  • Fridman, Emilia
  • García Gil, Pedro José|||0000-0002-1202-1269
  • Albertos Pérez, Pedro
[EN] The problem of output stabilization and disturbance rejection for input-delayed systems is tackled in this work. First, a suitable transformation is introduced to translate mismatched disturbances into an equivalent input disturbance. Then, an extended state observer is combined with a predictive observer structure to obtain a future estimation of both the state and the disturbance. A disturbance model is assumed to be known but attenuation of unmodeled components is also considered. The stabilization is proved via Lyapunov-Krasovskii functionals, leading to sufficient conditions in terms of linear matrix inequalities for the closed-loop analysis and parameter tuning. The proposed strategy is illustrated through a numerical example., PROMETEOII/2013/004; Conselleria d'Educacio; Generalitat Valenciana, Grant/Award Number: TIN2014-56158-C4-4-P-AR; Ministerio de Economia y Competitividad, Grant/Award Number: FPI-UPV 2014; Universitat Politecnica de Valencia
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhanced disturbance rejection for a predictor-based control of LTI systems with input delay

  • Sanz Díaz, Ricardo
  • García Gil, Pedro José|||0000-0002-1202-1269
  • Albertos Pérez, Pedro
In this paper, a new predictor-based control strategy for LTI systems with input delay and unknown disturbances is proposed. The disturbing signal and its derivatives up to the r-th order are estimated by means of an observer, and then used to construct a prediction of the disturbance. Such prediction allows defining a new predictive scheme that takes into account its effect. Also, a suitable transformation of the control input is presented and a performance analysis is carried out to show that, for a given controller, the proposed solution leads to better disturbance attenuation than previous approaches in the literature for smooth enough perturbations., This work was partially supported by projects TIN2014-56158-C4-4-P and PROMETEOII/2013/004.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhanced extended state observer-based control for systems with mismatched uncertainties and disturbances

  • Castillo-Frasquet, Alberto
  • Sanz Díaz, Ricardo
  • García Gil, Pedro José|||0000-0002-1202-1269
  • Albertos Pérez, Pedro
[EN] This paper presents an enhanced Extended State Observer (ESO)-based control strategy to deal with the disturbance attenuation problem for a class of non integral-chain systems subject to non-linear mismatched uncertainties and external disturbances. The proposed control strategy does not assume the integral-chain form and it is formed by a state-feedback plus a dynamic disturbance compensation term, which is designed to reject the disturbance effect in the system output. From a theoretical point of view, the proposed strategy is reduced to the conventional ESO when the integral chain form and the matched condition hold. In this sense, this paper is presented as an extension of the ESO principles to cover a wider class of systems. The theoretical results show that the internal zero-dynamics plays an important role in ESO-based control design. Also, the closed-loop stability is analyzed and some numerical simulations show the effectiveness of the proposal in comparison with previous ESO-based techniques., This work was partially supported by projects FPU15/02008, FPI-UPV 2014 and TIN2014-56158-C4-4-P-AR, Ministerio de Economia y Competitividad, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

New Predictor and 2DOF Control Scheme for Industrial Processes with Long Time Delay

  • Liu, Tao
  • Chen, Yueling
  • Ren, XH
  • Sanz Diaz, Ricardo
  • García Gil, Pedro José|||0000-0002-1202-1269
  • Albertos Pérez, Pedro
[EN] To address the difficulty of controlling industrial processes with long time delay, a novel design of dead-time compensator (DTC) is introduced, which can be used to predict the undelayed output response of any process (no matter stable or unstable) such that the control design may be focused on the delay-free part of the process for performance optimization. Based on the undelayed output estimation, a two-degree-of-freedom (2DOF) control scheme is analytically developed for optimizing the set-point tracking and disturbance rejection, respectively. By proposing the desired transfer functions, the corresponding controllers are analytically derived based on commonly used low-order process models. A notable advantage is that there is a single adjustable parameter in the proposed DTC, as well as in each controller, which can be monotonically tuned to meet a good tradeoff between the prediction (or control) performance and its robustness. Illustrative examples from the literature and a practical application to a temperature control system of a jacketed reactor are used to demonstrate the effectiveness of the proposed predictor-based control scheme., This work was supported in part by the NSF China under Grant 61633006 and Grant 61473054; in part by the National Thousand Talents Program of China, the PROMETEOII/2013/004, Conselleria d'Educacio, Generalitat Valenciana, and TIN2014-56158-C4-4-P-AR; in part by the Ministerio de Economia y Competitividad; and in part by the FPI-UPV 2014 Grant Program from the Universidad Politecnica de Valencia, Valencia, Spain
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A generalized smith predictor for unstable time-delay SISO systems

  • Sanz Díaz, Ricardo
  • García Gil, Pedro José|||0000-0002-1202-1269
  • Albertos Pérez, Pedro
[EN] In this work, a generalization of the Smith Predictor (SP) is proposed to control linear time-invariant (LTI) time-delay single-input single-output (SISO) systems. Similarly to the SP, the combination of any stabilizing output-feedback controller for the delay-free system with the proposed predictor leads to a stabilizing controller for the delayed system. Furthermore, the tracking performance and the steady-state disturbance rejection capabilities of the equivalent delay-free loop are preserved. In order to place this contribution in context, some modifications of the SP are revisited and recast under the same structure. The features of the proposed scheme are illustrated through simulations, showing a comparison with respect to the corresponding delay-free loop, which is here considered to be the ideal scenario. In order to emphasize the feasibility of this approach, a successful experimental implementation in a laboratory platform is also reported., This work was partially supported by the projects PROMETEOII/2013/004, Conselleria d'Educacio, Generalitat Valenciana; TIN2014-56158-C4-4-P-AR, Ministerio de Economia y Competitividad; and the FPI-UPV 2014 PhD Grant, Universitat Politecnica de Valencia, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dynamic Reconfiguration of a RGBD Sensor Based on QoS and QoC Requirements in Distributed Systems

  • Munera Sánchez, Eduardo
  • Poza-Lujan, Jose-Luis|||0000-0003-2450-9920
  • Posadas-Yagüe, Juan-Luis|||0000-0002-5017-8689
  • Simó Ten, José Enrique|||0000-0003-4677-7627
  • Blanes Noguera, Francisco|||0000-0002-9234-5377
The inclusion of embedded sensors into a networked system provides useful information for many applications. A Distributed Control System (DCS) is one of the clearest examples where processing and communications are constrained by the client s requirements and the capacity of the system. An embedded sensor with advanced processing and communications capabilities supplies high level information, abstracting from the data acquisition process and objects recognition mechanisms. The implementation of an embedded sensor/actuator as a Smart Resource permits clients to access sensor information through distributed network services. Smart resources can offer sensor services as well as computing, communications and peripheral access by implementing a self-aware based adaptation mechanism which adapts the execution profile to the context. On the other hand, information integrity must be ensured when computing processes are dynamically adapted. Therefore, the processing must be adapted to perform tasks in a certain lapse of time but always ensuring a minimum process quality. In the same way, communications must try to reduce the data traffic without excluding relevant information. The main objective of the paper is to present a dynamic configuration mechanism to adapt the sensor processing and communication to the client s requirements in the DCS. This paper describes an implementation of a smart resource based on a Red, Green, Blue, and Depth (RGBD) sensor in order to test the dynamic configuration mechanism presented., This work has been supported by the Spanish Science and Innovation Ministry MICINN under the CICYT project M2C2: "Codiseno de sistemas de control con criticidad mixta basado en misiones" TIN2014-56158-C4-4-P and the Programme for Research and Development PAID of the Polytechnic University of Valencia: UPV-PAID-FPI-2013. The responsibility for the content remains with the authors.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Robust controller design for input-delayed systems using predictive feedback and an uncertainty estimator

  • Sanz Diaz, Ricardo
  • Zhong, Qing-Chang
  • García Gil, Pedro José|||0000-0002-1202-1269
  • Albertos Pérez, Pedro
[EN] This paper deals with the problem of stabilizing a class of input-delayed systems with (possibly) nonlinear uncertainties by using explicit delay compensation. It is well known that plain predictive schemes lack robustness with respect to uncertain model parameters. In this work, an uncertainty estimator is derived for input-delay systems and combined with a modified state predictor, which uses current available information of the estimated uncertainties. Furthermore, based on Lyapunov-Krasovskii functionals, a computable criterion to check robust stability of the closed-loop is developed and cast into a minimization problem constrained to an LMI. Additionally, for a given input delay, an iterative-LMI algorithm is proposed to design stabilizing tuning parameters. The main results are illustrated and validated using a numerical example with a second-order dynamic system., This work was partially supported by projects PROMETEOII/2013/004, Conselleria d Educació, Generalitat Valenciana, and TIN2014-56158-C4-4-P-AR, Ministerio de Economía y Competitividad, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analytical design of a generalised predictor-based control scheme for low-order integrating and unstable systems with long time delay

  • Chen, Yueling
  • Liu, Tao
  • García Gil, Pedro José|||0000-0002-1202-1269
  • Albertos Pérez, Pedro
In this study, the problem of controlling integrating and unstable systems with long time delay is analysed in the discrete-time domain for digital implementation. Based on a generalised predictor-based control structure, where the plant time delay can be taken out of the control loop for the nominal plant, an analytical controller design is proposed in terms of the delay-free part of the nominal plant model. Correspondingly, further improved control performance is obtained compared with recently developed predictor-based control methods relying on numerical computation for controller parameterisation. The load disturbance rejection controller is derived by proposing the desired closed-loop transfer function, and another one for set-point tracking is designed in terms of the H-2 optimal control performance specification. Both controllers can be tuned relatively independently in a monotonic manner, with a single adjustable parameter in each controller. By establishing the sufficient and necessary condition for holding robust stability of the closed-loop control system, tuning constraints are derived together with numerical tuning guidelines for the disturbance rejection controller. Illustrative examples taken from the literature along with temperature control tests for a crystallisation reactor are used to demonstrate the effectiveness and merit of the proposed method., This work was supported in part by the National Thousand Talents Program of China, NSF China Grants 61473054, the Fundamental Research Funds for the Central Universities of China, and the Grants TIN2014-56158-C4-4-P and PROMETEOII/2013/004 from the Spanish and Valencian Governments.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Herramienta de configuración para sistemas IMA-SP

  • Valiente Moreno, Yolanda|||0000-0002-4079-9916
  • Balbastre, Patricia|||0000-0001-9458-4083
  • Simó Ten, José Enrique|||0000-0003-4677-7627
[ES] En este trabajo se describe la definición, diseño, implementaci ón y prueba del con- junto de herramientas necesarias para realizar las actividades del proceso de desarro- llo IMA-SP (Integrated Modular Avionics for SPace). Además, se definirá el modelo de datos, con los archivos asociados, que describen la configur ación completa de un sistema con particiones y la evaluación de la viabilidad del si stema; el desarrollo de un prototipo del conjunto de herramientas, que se llamará IMA-S P SDT (System De- velopment Toolkit) y la demostración de la herramienta sobre un caso de estudio, Este articulo ha sido subvencionado por el Ministerio de Economía y Competitividad bajo los proyectos TIN2014- 56158-C4-1-P y TIN2014- 56158-C4-4-P
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Robust Control of Quadrotors Based on an Uncertainty and Disturbance Estimator

  • Sanz Díaz, Ricardo
  • Zhong, Qing-Chang
  • García Gil, Pedro José|||0000-0002-1202-1269
  • Albertos Pérez, Pedro
In this paper, a robust control strategy is proposed to control the attitude and the altitude of quadrotors, based on an uncertainty and disturbance estimator (UDE). It is shown that the proposed controller can be tuned very easily, achieving the desired performance only by selecting an appropriate reference model and tuning a single parameter to tradeoff disturbance rejection with noise amplification in the control signal. The proposed control strategy is extensively validated in real-time applications with an experimental Quanser platform and also with a quadrotor prototype in real flight tests., The authors would like to thank the reviewers for their insightful and interesting comments, which have helped improve the quality of this paper. This work has been partially supported by Ministerio de Economia y Competitividad from Spain, under the Project No. TIN2014-56158-C4-4-P-AR, PROMETEOII/2013/004 of Generalitat Valenciana (Spain), and the Santander Research Mobility Award.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Robot Behavior Architecture Based on Smart Resource Service Execution

  • Munera-Sánchez, Eduardo
  • Poza-Lujan, Jose-Luis|||0000-0003-2450-9920
  • Posadas-Yagüe, Juan-Luis|||0000-0002-5017-8689
  • Simó Ten, José Enrique|||0000-0003-4677-7627
  • Blanes Noguera, Francisco|||0000-0002-9234-5377
[EN] Robot behavior definition aims to classify and specify the robot tasks execution. Behavior architecture design is crucial for proper robot operation performance. According to this, this work aims to establish a robot behavior architecture based on distributed intelligent services. Therefore, behavior definition is set in a high-level delegating the task execution to distributed services provided by network abstractions characterized as Smart Resources. In order to provide a mechanism to measure the performance of this architecture, an evaluation mechanisms based on a service performance composition is introduced. In order to test this proposal it is designed a real use case implementing the proposed robot behavior architecture on a real navigation task., Work supported by the Spanish Science and Innovation Ministry MICINN: CICYT 866 project M2C2: Codiseño de sistemas de control con criticidad mixta basado en 867 misiones TIN2014-56158-C4-4-P and PAID (Polytechnic University of Valencia): 868 UPV-PAID-FPI-2013.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An analysis on the impact and detection of kernel stack infoleaks

  • Peiró Frasquet, Salvador
  • Muñoz Alcobendas, Manuel
  • Crespo, Alfons|||0000-0002-6606-7406
[EN] The Linux kernel has become a fundamental component of mainstream computing solutions, now being used in a wide range of applications ranging from consumer electronics to cloud and server solutions. Being expected to continue its growth, especially in the mission-critical workloads. Parallel to the Linux adoption has increased its misuse by attackers and malicious users. This has increased attention paid to kernel security through the deployment of kernel protection mechanisms. Kernel-based attacks require reliability, where kernel attack reliability is achieved through the information gathering stage, where the attacker is able to gather enough information about the target to succeed. The taxonomy of kernel vulnerabilities includes information leaks (CWE-200), that are a class of vulnerabilities that permit access to the kernel memory layout and contents. Information leaks can improve the attack reliability enabling the attacker to read sensitive kernel data to bypass kernel based protections. In this work, we aim at the analysis and detection of stack-based information leaks to harden the security of the kernel. First, we analyse the problem of kernel infoleaks in Section 3, next, we examine the impact of infoleaks attacks on the security of the kernel in Section 4. Then, we present a technique for detecting kernel based infoleaks through static analysis Section 5. Next, we evaluate our technique by applying it to the Linux kernel in Section 6. Finally, we discuss the applications and limitations of our work (Section 6.3) and finally we draw our concluding remarks., The author wants to thank all the people that contributed to make this work possible. This work has been partially supported by the Spanish Government Research Office under grant TIN2014-56158-C4-1-P, TIN2014-56158-C4-4-P and EU Project DREAMS FP7-ICT- 610640.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhanced 2-DOF PID Controller Tuning Based on an Uncertainty and Disturbance Estimator With Experimental Validation

  • Balaguer Garín, Vicente
  • González Sorribes, Antonio|||0000-0003-2690-0472
  • García Gil, Pedro José|||0000-0002-1202-1269
  • Blanes Noguera, Francisco|||0000-0002-9234-5377
[EN] In this paper a novel tuning procedure for Two-Degree-of-Freedom (2-DOF) PID controllers is proposed. The tuning methodology is based on an Uncertainty and Disturbance Estimator. As a result, an equivalent 2-DOF PID controller with simpler tuning rules is obtained. One advantage of the proposed method is that tracking performance and disturbance rejection can be accommodated separately in control synthesis. Moreover, the trade-off between disturbance rejection and robustness can easily be adjusted by tuning a single parameter without affecting the desired set-point tracking specifications. Numerical comparisons with well-known tuning methods are performed to illustrate the advantages of the proposed method. Finally, the effectiveness of the proposal is experimentally validated in an open-loop unstable plant consisting of a test-bed quadrotor platform., This work was supported by projects FPI-UPV PAID-01-17, Universitat Politecnica de Valencia (Spain), and TIN2017-86520-C3-1-R, Ministerio de Economia y Competitividad (Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Integrating Smart Resources in ROS-based systems to distribute services

  • Munera-Sánchez, Eduardo
  • Poza-Lujan, Jose-Luis|||0000-0003-2450-9920
  • Posadas-Yagüe, Juan-Luis|||0000-0002-5017-8689
  • Simó Ten, José Enrique|||0000-0003-4677-7627
  • Blanes Noguera, Francisco|||0000-0002-9234-5377
[EN] Mobile robots execute complexes tasks that involve the management of several embedded sensors and actuators. Therefore, in many cases, a robot is characterized as an intelligent distributed system formed with a central unit, which manages the on-board embedded devices and distributes the tasks execution. Embedded devices are also evolving to more complex systems. These systems are developed not only for executing simple tasks but also for offering some advanced mechanisms. Thus, complex data processing, adaptive execution, or fault-tolerance routines are some common system features. The Smart Resource topology has been developed in order to manage these embedded systems. This topology offers high-level routines that rely on a certain physical hardware execution. Therefore, Smart Resources are defined as distributed services providers, which operates within some context and quality requirements. Provided services can adapt its execution in order accomplish the set requirements and maximize the system performance. How to improve the versatility of the Smart Resources by making their services compatibles with the Robot Operating System (ROS) is addressed along this work. This solution integrates all the execution mechanisms provided by ROS with the service distribution, adaptive execution, and fault-tolerance routines offered by the Smart Resources. This integration is tested through a set of experiments using the Turtlebot robot platform and a simulated version of it. In both approaches ROS mechanisms are used to access the Smart Resource Services. Finally, obtained results are used to characterize the performance of this proposal., Work supported by the Spanish Science and Innovation Ministry MICINN: CICYT project M2C2: "Codiseno de sistemas de control con criticidad mixta basado en misiones" TIN2014-56158-C4-4-P and PAID (Polytechnic University of Valencia): UPV-PAID-FPI-2013.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Predictor-Based Control of a Class of Time-Delay Systems and its Application to Quadrotors

  • Sanz Díaz, Ricardo
  • Zhong, Qing-Chang
  • García Gil, Pedro José|||0000-0002-1202-1269
  • Albertos Pérez, Pedro
In this paper, a new robust control strategy based on a predictor and the uncertainty and disturbance estimator is developed for a class of uncertain nonlinear systems with input/output delays. The closed-loop system is analyzed and sufficient stability conditions are derived based on Lyapunov analysis. The proposed strategy is applied to the particular case of quadrotor systems and validated through extensive simulations to evaluate performance and robustness. The controller is also implemented in a quadrotor prototype and validated in flight tests., This work was supported by the PROMETEOII/2013/004, Conselleria d'Educacio, Generalitat Valenciana, and TIN2014-56158-C4-4-P-AR, Ministerio de Economia y Competitividad, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Disturbance observer-based quadrotor attitude tracking control for aggressive maneuvers

  • Castillo, Alberto
  • Sanz Diaz, Ricardo
  • Qiu, Wei
  • Wang, Hongda
  • Xu, Chao
  • García Gil, Pedro José|||0000-0002-1202-1269
[EN] In this paper, a disturbance observer-based quadrotor attitude controller for aggressive maneuvering is presented. The controller is made up of the cascade connection between two control-loops: an outer quaternion-based attitude controlloop and an inner disturbance observer-based angular velocity tracking control-loop. The disturbance observer is designed to estimate and compensate for the Coriolis term and the external disturbances. It is shown that, for fast maneuvers, the disturbance observer needs to take into account the motor dynamics. This allows increasing notably the observer bandwidth, leading to significant improvements in the disturbance rejection capabilities. The stability of the resulting closed-loop is analyzed. Also, different simulations and flight tests are carried out to validate the main results, showing an outstanding tracking performance when aggressive attitude maneuvers are being executed, even in the presence of strong disturbances such as suspended payloads., This work was partially supported by projects FPU15/02008, FPIUPV 2014 and TIN2014-56158-C4-4-P-AR, Ministerio de Economia y Competitividad, Spain.
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Arquitectura de comunicaciones de tiempo real para robots modulares basados en ROS

  • Munera, Eduardo
  • Poza-Luján, José-Luis
  • Posadas-Yagüe, Juan-Luis
  • Blanes Noguera, Francisco
  • Simo, Jose
[Resumen] Actualmente, las plataformas para robots que implementan ROS son ampliamente usadas en investigación. Éstas han probado ofrecer una solución fiable para reutilizar algoritmos. No obstante, estos cuentan con ciertos inconvenientes. Aunque la arquitectura ROS ha sido diseñada con la posibilidad de trabajar de forma distribuida, este diseño presenta algunos problemas al gestionar un gran numero de dispositivos los cuales requieren de un flujo de datos en tiempo real. En este trabajo se presenta una arquitectura de comunicaciones para solucionar este problema. Además se valida dicha arquitectura por medio de un robot modular a partir de dispositivos totalmente desacoplados. Un robot modular puede presentarse como un Sistema de Control Distribuido (DCS, por sus iniciales en inglés), donde las tasas de transmisión y el flujo de datos debe ser acotado para poder garantizar una correcta ejecución. Por lo tanto, se detalla como solucionar el problema de comunicación distribuida entre nodos ROS posibilita el intercambio de datos de forma fácil y segura. Como consecuencia se propicia el desarrollo de sistemas modulares basados en ROS. Por ultimo se realiza una comparación entre el desempeño del sistema obtenido cuando se implementa una distribución ROS clásica, y el obtenido cuando se utiliza la arquitectura de comunicaciones propuesta., Este trabajo ha sido financiado por el Ministerio de Ciencia e Innovación de España (MICINN): CICYT project M2C2 Co-diseño de sistemas de control con criticidad mixta basado en misiones TIN2014-56158-C4-4-P y el programa PAID (Universidad Politécnica de Valencia): UPV-PAIDFPI-2013, Universitat Politècnica de València; UPV-PAIDFPI-2013, https://doi.org/10.17979/spudc.9788497498081
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Desarrollo de un módulo de comunicaciones para protocolo FINS-TCP sobre servidor OPC-UA

  • Blanes Noguera, Francisco
  • Benlloch Faus, Andrés
[Resumen] El presente trabajo aborda el diseño y desarrollo de un módulo Java de comunicaciones que implementa el protocolo de comunicaciones FINS-TCP, protocolo diseñado por la empresa OMRON para llevar a cabo comunicaciones con los PLC’s entre un equipo (computador) y un PLC, o entre varios PLC’s. Una vez diseñado el módulo de comunicaciones se llevara a cabo el despliegue del mismo sobre diferentes servidores OPC-UA (Open Platform Communications), con diferentes escenarios de uso. Los servidores OPC-UA utilizados para llevar a cabo el testeo del módulo son Ignition, de la empresa Inductive Automation, y Prosys OPC-UA Server, de la empresa Prosys LTD. Ambos basan su implementación en lenguaje de programación Java, lo que permite la portabilidad de los mismos a entornos muy diferentes. Una vez desarrollado llevamos a cabo el despliegue del mismo sobre un ordenador y sobre un sistema empotrado BeagleBone Black, de forma que se evaluara la viabilidad tanto en entornos potentes de servidor, como en sistemas con recursos limitados., Este trabajo ha sido parcialmente financiado por el Ministerio de Ciencia e Innovación de España (MICINN); proyecto CICYT M2C2 “Codiseño de sistemas de control con criticidad mixta basado en misiones” TIN2014-56158-C4-4-P, https://doi.org/10.17979/spudc.9788497498081
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Planificación multinúcleo en sistemas particionados

  • Brocal, Vicent
  • Crespo, Alfons
  • Balbastre, Patricia
[Resumen] Actualmente, las aplicaciones embebidas se consideran de complejidad creciente y, como consecuencia, de mayor dificultad para su desarrollo y validación. Debido a estas características, existe un gran interés en ejecutar múltiples aplicaciones sobre una única plataforma (mono o multinúcleo). En los sistemas de tiempo real, cada vez más se ejecutan aplicaciones con diferentes niveles de criticidad donde múltiples componentes con diferentes restricciones de tiempo real se integran en una misma plataforma computacional. Al mismo tiempo en el que proliferan los sistemas de criticidad mixta, la plataforma computacional está migrando de mono núcleo a multinúcleo. El presente trabajo describe la planificación de sistemas particionados multinúcleo, desde la asignación de tareas a núcleos hasta la generación de la planificación para cada procesador., Este articulo ha sido subvencionado por el Ministerio de Economía y Competitividad bajo los proyectos TIN2014-56158-C4-1-P y TIN2014-56158-C4-4-P, https://doi.org/10.17979/spudc.9788497498081
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Event-triggered predictor-based control with gain-Scheduling and extended state observer for networked control systems

  • González, A.
  • Cuenca, A.
  • Balaguer, V.
  • García, P.
This paper investigates the stabilization of Networked Control Systems (NCS) with mismatched disturbances through a novel Event-Triggered Control (ETC), composed of a predictor-feedback scheme and a gain-scheduled Extended State Observer (ESO). The key idea of the proposed control strategy is threefold: (i) to reduce resource usage in the NCS (bandwidth, energy) while maintaining a satisfactory control performance; (ii) to counteract the main negative effects of NCS: time-varying delays, packet dropouts, packet disorder, and (iii) to reject the steady-state error in the controlled output due to mismatched disturbances. Moreover, we address the co-design of the controller/observer gains, together with the event-triggered parameters, by means of Linear Matrix Inequalities (LMI) and Cone Complementarity Linearization (CCL) approaches. Finally, we illustrate the effectiveness of the proposed control synthesis by simulation and experimental results in a Unmanned Aerial Vehicle (UAV) based test-bed platform.