Pasar al contenido principal

REDES DE INTERCONEXION Y SISTEMAS HETEROGENEOS

TIN2016-76635-C2-2-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE CANTABRIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Aprendizaje autónomo del estudiante apoyado en recursos audiovisuales en el contexto de un Grado de Ingeniería Informática: experiencias con metodologías de enseñanza activas

  • Vallejo, Enrique
  • Fuentes, Pablo
  • Benito, Mariano
[EN] The course Introduction to Computer Networks from the University of Cantabria has a low success, with complaints about the lack of sufficient practical classes that reinforce the theoretical contents. An innovation project has been developed to develop a set of multimedia materials that replace some master classes and increase the amount of practical sessions, following a flipped classroom model. Specifically, six videos have been developed, each of them accompanied by a self-learning activity, and an associated practical session. Such sessions followed approximately a Problem-Based Learning approach. The impact of the project has been evaluated, on the motivation, withdrawal and academic results. The response of the students is positive, with a slightly increase in the classroom attendance. Students indicate that they prefer this type of learning. However, monitoring tools show that activity attendance is significantly lower than expected. Academic results show a rate of student withdrawal similar to previous years, but a slightly higher rate of students passing the course. Overall, the results of the project is very positive, given the increased student motivation, and a similar approach will be considered in forthcoming courses., [ES] La asignatura Introducción a las Redes de Computadores de la Universidad de Cantabria presenta un rendimiento bajo, con queja de la falta de clases prácticas que refuercen los contenidos teóricos. Para atacar el problema, se ha desarrollado un conjunto de materiales audiovisuales que reemplacen algunas de las clases teóricas y aumenten la cantidad de sesiones prácticas en el aula siguiendo un modelo de flipped classroom. En concreto, se han desarrollado seis vídeos para el auto-aprendizaje por parte del alumno, acompañados de tests de autoevaluación y de seis sesiones prácticas en el aula. En dichas sesiones, se ha seguido aproximadamente una metodología de aprendizaje basado en problemas. Se ha evaluado el impacto del proyecto sobre la motivación, seguimiento y resultados del alumnado. La respuesta del alumnado al cambio metodológico es positivo, aumentándose ligeramente la asistencia a clase y seguimiento de la asignatura. Sin embargo, el seguimiento de los recursos es mucho más bajo de lo esperado. Los resultados académicos muestran una tasa de alumnos presentados similar a la de cursos previos, pero una tasa de aprobados ligeramente superior. Globalmente, el resultado del proyecto es muy positivo, y plantea seguirse un esquema similar en cursos posteriores., Este proyecto está apoyado por la III Convocatoria de Proyectos de Innovación Docente del Vicerrectorado de Profesorado de la Universidad de Cantabria y por el Ministerio de Economía, Industria y Competitividad bajo el contrato TIN2016-76635-C2-2-R (AEI/FEDER, UE). Pablo Fuentes está financiado por el Ministerio de Educación, Cultura y Deporte, beca FPU13/00337.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Tecnología low-cost para motivar al alumno

  • Fuentes, Pablo
  • Camarero, Cristóbal
  • Martínez, Carmen
  • Vallejo, Fernando
La docencia en Estructura y Organización de Computadores se imparte habitualmente utilizando una arquitectura como referencia, siendo MIPS una de las más usadas. Sin embargo, su baja penetración en el mercado actual tiene un efecto desmotivador en los alumnos. Esto, junto con la mayor relevancia de la arquitectura ARM, nos ha hecho plantearnos considerarla como referencia en nuestros planes de estudios. Con este objetivo, se ha desarrollado un proyecto de innovación docente para rediseñar las materias implicadas. Esta modificación ha implicado cambios en el laboratorio en el que se desarrollan las prácticas, para el que se ha seleccionado Raspberry Pi, una plataforma de bajo coste basada en ARM. Como principal diferencia respecto a otras soluciones, se ha elegido el sistema operativo RISC OS, que permite realizas prácticas de programación en ensamblador y Entrada/Salida en el mismo entorno. Además, se ha desarrollado un depurador en ARM llamado !UCDebug. En este artículo se describen las diferentes etapas del proyecto y los resultados obtenidos. Cabe destacar que, en los dos cursos que lleva implantado, la motivación y asistencia de los alumnos ha aumentado considerablemente y la tasa de éxito ha subido hasta un 13%.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Extending OmpSs for OpenCL kernel co-execution in heterogeneous systems

  • Pérez, Borja
  • Stafford, Esteban
  • Bosque, Jose L.
  • Beivide Palacio, Ramon
  • Mateo, Sergi
  • Teruel, Xavier
  • Martorell Bofill, Xavier
  • Ayguadé Parra, Eduard
© 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Heterogeneous systems have a very high potential performance but present difficulties in their programming. OmpSs is a well known framework for task based parallel applications, which is an interesting tool to simplify the programming of these systems. However, it does not support the co-execution of a single OpenCL kernel instance on several compute devices. To overcome this limitation, this paper presents an extension of the OmpSs framework that solves two main objectives: the automatic division of datasets among several devices and the management of their memory address spaces. To adapt to different kinds of applications, the data division can be performed by the novel HGuided load balancing algorithm or by the well known Static and Dynamic. All this is accomplished with negligible impact on the programming. Experimental results reveal that there is always one load balancing algorithm that improves the performance and energy consumption of the system., This work has been supported by the University of Cantabria with grant CVE-2014-18166, the Generalitat de Catalunya under grant 2014-SGR-1051, the Spanish Ministry of Economy, Industry and Competitiveness under contracts TIN2016- 76635-C2-2-R (AEI/FEDER, UE) and TIN2015-65316-P. The Spanish Government through the Programa Severo Ochoa (SEV-2015-0493). The European Research Council under grant agreement No 321253 European Community’s Seventh Framework Programme [FP7/2007-2013] and Horizon 2020 under the Mont-Blanc Projects, grant agreement n 288777, 610402 and 671697 and the European HiPEAC Network., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

To distribute or not to distribute: The question of load balancing for performance or energy

  • Stafford, Esteban
  • Pérez, Borja
  • Bosque, Jose L.
  • Beivide Palacio, Ramon
  • Valero Cortés, Mateo
Heterogeneous systems are nowadays a common choice in the path to Exascale. Through the use of accelerators they offer outstanding energy efficiency. The programming of these devices employs the host-device model, which is suboptimal as CPU remains idle during kernel executions, but still consumes energy. Making the CPU contribute computin effort might improve the performance and energy consumption of the system. This paper analyses the advantages of this approach and sets the limits of when its beneficial. The claims are supported by a set of models that determine how to share a single data-parallel task between the CPU and the accelerator for optimum performance, energy consumption or efficiency. Interestingly, the models show that optimising performance does not always mean optimum energy or efficiency as well. The paper experimentally validates the models, which represent an invaluable tool for programmers when faced with the dilemma of whether to distribute their workload in these systems., This work has been supported by the University of Cantabria (CVE-2014-18166), the Spanish Science and Technology Commission (TIN2016-76635-C2-2-R), the European Research Council (G.A. No 321253) and the European HiPEAC Network of Excellence. The Mont-Blanc project has received funding from the European Unions Horizon 2020 research and innovation programme under grant agreement No 671697., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A scalable synthetic traffic model of Graph500 for computer networks analysis

  • Fuentes Sáez, Pablo
  • Benito, Mariano
  • Vallejo, Enrique
  • Bosque Orero, José Luis
  • Beivide Palacio, Ramon
  • Anghel, Andreea
  • Rodríguez Herrera, Germán
  • Gusat, Mitch
  • Minkenberg, Cyriel
  • Valero Cortés, Mateo
The Graph500 benchmark attempts to steer the design of High-Performance Computing systems to maximize the performance under memory-constricted application workloads. A realistic simulation of such benchmarks for architectural research is challenging due to size and detail limitations. By contrast, synthetic traffic workloads constitute one of the least resource-consuming methods to evaluate the performance. In this work, we provide a simulation tool for network architects that need to evaluate the suitability of their interconnect for BigData applications. Our development is a low computation- and memory-demanding synthetic traffic model that emulates the behavior of the Graph500 communications and is publicly available in an open-source network simulator. The characterization of network traffic is inferred from a profile of several executions of the benchmark with different input parameters. We verify the validity of the equations in our model against an execution of the benchmark with a different set of parameters. Furthermore, we identify the impact of the node computation capabilities and network characteristics in the execution time of the model in a Dragonfly network, The authors would like to thank the European HiPEAC Network of Excellence for partially funding this work through a Collaboration Grant. They would like to thank as well Crist´obal Camarero for his help. This work has been supported by the Spanish Ministry of Education, FPU grants FPU13/00337 and FPU14/02253, the Spanish Ministry of Economy, Industry and Competitiveness under contract TIN2016-76635-C2-2-R (AEI/FEDER, UE), and by the Mont-Blanc project. The Mont-Blanc project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 671697. Santander Supercomputacion support group from the University of Cantabria provided access to the Altamira Supercomputer at the Institute of Physics of Cantabria (IFCA-CSIC)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Auto-tuned OpenCL kernel co-execution in OmpSs for heterogeneous systems

  • Pérez, Borja
  • Stafford, Esteban
  • Bosque Orero, José Luis
  • Beivide Palacio, Ramon
  • Mateo Bellido, Sergi
  • Teruel García, Xavier
  • Martorell Bofill, Xavier
  • Ayguadé Parra, Eduard
© <2018>. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, The emergence of heterogeneous systems has been very notable recently. The nodes of the most powerful computers integrate several compute accelerators, like GPUs. Profiting from such node configurations is not a trivial endeavour. OmpSs is a framework for task based parallel applications, that allows the execution of OpenCl kernels on different compute devices. However, it does not support the co-execution of a single kernel on several devices. This paper presents an extension of OmpSs that rises to this challenge, and presents Auto-Tune, a load balancing algorithm that automatically adjusts its internal parameters to suit the hardware capabilities and application behavior. The extension allows programmers to take full advantage of the computing devices with negligible impact on the code. It takes care of two main issues. First, the automatic distribution of datasets and the management of device memory address spaces. Second, the implementation of a set of load balancing algorithms to adapt to the particularities of applications and systems. Experimental results reveal that the co-execution of single kernels on all the devices in the node is beneficial in terms of performance and energy consumption, and that Auto-Tune gives the best overall results., Peer Reviewed, Preprint