Pasar al contenido principal

REDES Y CLOUD COMUNITARIOS

TIN2016-77836-C2-2-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 23
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Minimulticomputador de bajo coste

  • Aliagas, Carles
  • Millán, Pere
  • Molina, Carlos
  • Messeguer, Roc
En la mayoría de los estudios de Grado en Ingeniería Informática hay asignaturas que abordan el tema de la supercomputación. Uno de sus objetivos es adquirir competencias en programación paralela. Para realizar ejercicios y prácticas se suelen usar estándares como OpenMP, MPI y CUDA. Para programar con dichos estándares se usan sistemas de elevado precio, lo que hace que el presupuesto disponible limite el número de procesadores. Por lo tanto, el acceso a un supercomputador con cientos de procesadores (que supone centenares de miles de euros) no parece estar justificado para realizar prácticas con los estudiantes. Sin embargo, y siguiendo la tendencia de usar muchos procesadores pero poco potentes basados en ARM, se puede construir un minimulticomputador de bajo coste por un precio equivalente a un servidor de memoria compartida. Este trabajo presenta un recurso docente basado en placas de HardKernel, que integran 64 placas Odroid y que mediante Gigabit-Ethernet permiten montar un servidor de programación MPI con 256 procesadores. Si bien se trata de un recurso de bajas prestaciones, es interesante el hecho de tener acceso a centenares de procesadores para poder hacer estudios de escalabilidad, manteniendo un buen compromiso entre prestaciones, precio y consumo.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

A monitoring system for distributed edge infrastructures with decentralized coordination

  • Pueyo Centelles, Roger
  • Selimi, Mennan
  • Freitag, Fèlix
  • Navarro Moldes, Leandro
We present the case of monitoring a decentralized and crowdsourced network infrastructure, that needs to be monitored over geographically distributed devices at the network edge. It is a characteristic of the target environment that both, the infrastructure to be monitored and the hosts where the monitoring system runs, change over time, and network partitions may happen. The proposed monitoring system is decentralized, and monitoring servers coordinate their actions through an eventually consistent data storage layer deployed at the network edge. We developed a proof-of-concept implementation, which leverages CRDT-based data types provided by AntidoteDB. Our evaluation focuses on the understanding of the continuously updated mapping of monitoring server to network devices, specifically on the effects of different policies for each individual monitoring server to decide on which and how many network devices to monitor. One of the policies is experimented by means of a deployment on 8 real nodes, leveraging the data replication of AntidoteDB in a realistic setting. The observed effects of the different policies are interpreted from the point of view of the trade-off between resource consumption and redundancy., This work was supported by the European H2020 framework programme project LightKone (H2020-732505), by the Spanish government contract TIN2016-77836-C2-2-R and PID2019-106774RB-C21 by the Catalan government contract AGAUR SGR 990., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Extending LoRa networks: dynamic routing protocols and sub-GHz radio technology for very long range mesh networks: student research abstract

  • Pueyo Centelles, Roger
Sub-GHz radio technologies operating in ISM bands, such as LoRa 1 , have become very popular as the wireless data transmission mechanism for IoT applications. Their great link budget allows nodes to reach several km while keeping power usage low. Most of the diverse network protocols and architectures currently in use enforce a star topology that limits the network operation to single-hop transmissions to a gateway. With the adoption of multi-hop data transmission, these networks could extend farther, and cover very large areas without the need for more gateways. The combination of long-range sub-GHz radio technologies and dynamic Routing Protocols, similarly to how they are used in WiFi Mesh Networks, could provide a sweet spot solution to fulfil the network requirements of IoT deployments covering very large areas without the need for additional centralised gateways infrastructure. This idea can also be applied to other scenarios, like out-of-band management of network equipment, emergency networks, etc., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Cloudy in guifi.net: Establishing and sustaining a community cloud as open commons

  • Baig Viñas, Roger
  • Freitag, Fèlix
  • Navarro Moldes, Leandro
Commons are natural or human-made resources that are managed cooperatively. The guifi.net community network is a successful example of a digital infrastructure, a computer network, managed as an open commons. Inspired by the guifi.net case and its commons governance model, we claim that a computing cloud, another digital infrastructure, can also be managed as an open commons if the appropriate tools are put in place. In this paper, we explore the feasibility and sustainability of community clouds as open commons: open user-driven clouds formed by community-managed computing resources. We propose organising the infrastructure as a service (IaaS) and platform as a service (PaaS) cloud service layers as common-pool resources (CPR) for enabling a sustainable cloud service provision. On this basis, we have outlined a governance framework for community clouds, and we have developed Cloudy, a cloud software stack that comprises a set of tools and components to build and operate community cloud services. Cloudy is tailored to the needs of the guifi.net community network, but it can be adopted by other communities. We have validated the feasibility of community clouds in a deployment in guifi.net of some 60 devices running Cloudy for over two years. To gain insight into the capacity of end-user services to generate enough value and utility to sustain the whole cloud ecosystem, we have developed a file storage application and tested it with a group of 10 guifi.net users. The experimental results and the experience from the action research confirm the feasibility and potential sustainability of the community cloud as an open commons., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Circular consumption and production of electronic devices: an approach to measuring durability, upgradeability, reusability, obsolescence and premature recycling

  • Franquesa Griso, David
  • Navarro Moldes, Leandro
  • Fortelny, Stephan
  • Roura Salietti, Mireia
  • Nadeu Ferran, Jordi
What is circular consumption of electronics? Is it measurable? Can we set goals or compare with other consumers? A principle of circular economy is durability, prolonging the useful life of products. If we move the principle to the function of consumption, we would have that: circular consumption is to make the most of time resources by ensuring that in the end they are recycled, but never before time or prematurely, but only when they can no longer be used or reused by anyone else. In this article we propose a set of measures, metrics and progress indicators to measure the use of resources that consumers make in their use phase. With these metrics we can identify which consumers are the most circular; those who are able to use the same electronic devices for the longest time, either internally, or by collaborating with external agents so that these devices are reused and recycled properly. We have been able to validate usage performance metrics and premature recycling in the analysis of more than 3,000 desktop and laptop type electronic devices. These devices have been discarded by hundreds of organisations in 2018 and 2019. Finally, we propose the metrics of durability and obsolescence for models and brands of devices, which although it does not allow us to know the reasons for a low durability; absence or high cost of spare parts, difficulty of repair, etc., it does allow us to elaborate a ranking so that consumers can reward with their consumption choice, manufacturers who make products that reach high thresholds of durability., This work is partially supported by the Venture Builder program of the Ledger project of the European Commission #825268, the Agència de Residus de Catalunya, the Spanish government TIN2016-77836-C2-2R and the Catalan government AGAUR SGR 990. We thank the eReuse team, Xavier Bustamante, the developers of the smartmontools software, and the community of circular economy activists in eReuse, the Pangea circuit, and the open-source community in general, as metaphorically, we stand on the shoulders of giants that allow us to see beyond the horizon., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Minimulticomputador de bajo coste

  • Aliagas, Carles
  • Millán Marco, Pere
  • Molina Clemente, Carlos Maria
  • Meseguer Pallarès, Roc
En la mayoría de los estudios de Grado en Ingeniería Informática hay asignaturas que abordan el tema de la supercomputación. Uno de sus objetivos es adquirir competencias en programación paralela. Para realizar ejercicios y prácticas se suelen usar estándares como OpenMP, MPI y CUDA. Para programar con dichos estándares se usan sistemas de elevado precio, lo que hace que el presupuesto disponible limite el número de procesadores. Por lo tanto, el acceso a un supercomputador con cientos de procesadores (que supone centenares de miles de euros) no parece estar justificado para realizar prácticas con los estudiantes. Sin embargo, y siguiendo la tendencia de usar muchos procesadores pero poco potentes basados en ARM, se puede construir un minimulticomputador de bajo coste por un precio equivalente a un servidor de memoria compartida. Este trabajo presenta un recurso docente basado en placas de HardKernel, que integran 64 placas Odroid y que mediante Gigabit-Ethernet permiten montar un servidor de programación MPI con 256 procesadores. Si bien se trata de un recurso de bajas prestaciones, es interesante el hecho de tener acceso a centenares de procesadores para poder hacer estudios de escalabilidad, manteniendo un buen compromiso entre prestaciones, precio y consumo., Este trabajo ha contado con la financiación del Gobierno de España bajo los contratos TIN2016-77836-C2-1-R, TIN2016-77836-C2-2-R, TIN2016-75344-R y DPI2016-77415-R, y también de la Generalitat de Catalunya como Grupos de Investigación Consolidados 2017-SGR-688 y 2017-SGR-990, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Sense-Share: a framework for resilient collaborative service performance monitoring

  • Batbayar, Khulan
  • Dimogerontakis, Emmanouil
  • Meseguer Pallarès, Roc
  • Navarro Moldes, Leandro
  • Sadre, Ramin
Modern large-scale networked services, such asvideo streaming, are typically deployed at multiple locationsin the network to provide redundancy and load balancing.Different techniques are used to provide performance monitoringinformation so that client nodes can select the best serviceinstance. One of them is collaborative sensing, where clientsshare measurement results on the observed service performanceto build a common ground of knowledge with low overhead.Clients can then use this common ground to select the mostsuitable service provider. However, collaborative algorithms aresusceptible to false measurements sent by malfunctioning ormalicious nodes, which decreases the accuracy of the performancesensing process. We propose Sense-Share, a simple light-weightand resilient collaborative sensing framework based on the simi-larity of the client nodes’ perception of service performance. Ourexperimental evaluation in different topologies shows that serviceperformance sensing using Sense-Share achieves, on average,94% similarity to non-collaborative brute force performancesensing, tolerating faulty nodes. Furthermore, our approacheffectively distributes the service monitoring requests over theservice nodes and exploits direct inter-node communication toshare measurements, resulting in reduced monitoring overhead, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Time series analysis to predict end-to-end quality of wireless community networks

  • Millán Marco, Pere
  • Aliagas Castell, Carles
  • Molina Clemente, Carlos Maria
  • Dimogerontakis, Emmanouil
  • Meseguer Pallarès, Roc
Community Networks have been around us for decades being initially deployed in the USA and Europe. They were designed by individuals to provide open and free “do it yourself” Internet access to other individuals in the same community and geographic area. In recent years, they have evolved as a viable solution to provide Internet access in developing countries and rural areas. Their social impact is measurable, as the community is provided with the right and opportunity of communication. Community networks combine wired and wireless links, and the nature of the wireless medium is unreliable. This poses several challenges to the routing protocol. For instance, Link-State routing protocols deal with End-to-End Quality tracking to select paths that maximize the delivery rate and minimize traffic congestion. In this work, we focused on End-to-End Quality prediction by means of time-series analysis to foresee which paths are more likely to change their quality. We show that it is possible to accurately predict End-to-End Quality with a small Mean Absolute Error in the routing layer of large-scale, distributed, and decentralized networks. In particular, we analyzed the path ETX behavior and properties to better identify the best prediction algorithm. We also analyzed the End-to-End Quality prediction accuracy some steps ahead in the future, as well as its dependency on the hour of the day. Besides, we quantified the computational cost of the prediction. Finally, we evaluated the impact of the usage for routing of our approach versus a simplified OLSR (ETX + Dijkstra) on an overloaded network., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Gelly-scheduling: distributed graph processing for service placement in community networks

  • Coimbra, Miguel E.
  • Selimi, Mennan
  • Francisco, Alexandre P.
  • Freitag, Fèlix
  • Veiga, Luis
Community networks (CNs) have seen an increase in the last fifteen years. Their members contact nodes which operate Internet proxies, web servers, user file storage and video streaming services, to name a few. Detecting communities of nodes with properties (such as co-location) and assessing node eligibility for service placement is thus a key-factor in optimizing the experience of users. We present a novel solution for the problem of service placement as a two-phase approach, based on: 1) community finding using a scalable graph label propagation technique and 2) a decentralized election procedure to address the multi-objective challenge of optimizing service placement in CNs. Herein we: i) highlight the applicability of leader election heuristics which are important for service placement in community networks and scheduler-dependent scenarios; ii) present a parallel and distributed solution designed as a scalable alternative for the problem of service placement, which has mostly seen computational approaches based on centralization and sequential execution., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

The RIMO gateway selection approach for mesh networks: Towards a global Internet access for all

  • Batbayar, Khulan
  • Dimogerontakis, Emmanouil
  • Meseguer Pallarès, Roc
  • Navarro Moldes, Leandro
  • Medina Medina, Esunly
  • Santos, Rodrigo
Community wireless mesh networks have emerged as cooperative initiatives to provide Internet Access in areas where traditional ISP costs are not affordable for the population. It is common in wireless mesh networks sharing several capacity limited Internet gateways to provide Internet access. As routing does not handle capacity planning, end-users have to select gateways in such a way that the overall capacity of all gateways could be used effectively. An efficient gateway selection should minimize the processing logic and measurements over the mesh network. Selecting a high performance gateway can also ensure that the overall network load is balanced. This paper presents RIMO, a standalone best-effort algorithm for client nodes to select their preferred gateway without interacting with other client nodes. RIMO-based selection matches the gateway performance of the reference brute-force and omniscient algorithms for 60% of the test duration while reducing the gateway performance measurement cost from a factor of n to 2. With a reduced overhead and high efficiency, the RIMO algorithm automates the aggregation of multiple Internet gateways in wireless mesh networks, which results in robust last mile Internet connectivity to people in vulnerable situation., This research was funded by the EU Horizon 2020 Framework Program project netCommons (H2020-688768), by the EMJD-DC program, by the Spanish Government under contract TIN2016-77836-C2-2-R, and by the Generalitat de Catalunya as Consolidated Research Group 2017-SGR-990., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

LoRaMoto: a communication system to provide safety awareness among civilians after an earthquake

  • Pueyo Centelles, Roger
  • Meseguer Pallarès, Roc
  • Freitag, Fèlix
  • Navarro Moldes, Leandro
  • Ochoa, Sergio
  • Santos, Rodrigo
© <2020>. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Civilians in areas hit by earthquakes become in particular concerned about the safety of family and friends. However, outages in communications networks following these events limit their capacity to get information. So, people drive their cars to check on their loved ones, risking their own lives and hindering the activities of first response organizations. This article proposes LoRaMoto, a communications system that allows civilians to exchange information about their status with others without hampering the first responders and minimizing their exposure to hazards. Furthermore, the information exchanged can be aggregated to support the operations of emergency management. LoRaMoto extends the LoRaWAN architecture and implements a packet-forwarding mechanism between the end nodes of the system. This helps overcome potential infrastructure blackouts after an earthquake, so it provides safety awareness information when it is most needed. We evaluated the system performance and capacity of this system by simulating its use in a realistic environment, testing a baseline configuration, and exploring several modifications to better understand its scalability and its portability to other emergency environments. The simulation results show how the LoRaMoto system can meet the communication needs of civilians, and also keep first response and emergency management organizations informed., This work was partially supported by the European Regional Development Fund and the Spanish government (TIN2016-77836- C2-2-R and PID2019-106774RB-C21), by the Spanish State Research Agency (AEI) under contracts PCI2019-111850-2 and PCI2019-111851-2, and the Generalitat de Catalunya, Spain (2017 SGR-990)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación

Multiple dimensions of community network scalability

  • Baig Viñas, Roger
  • Navarro Moldes, Leandro
  • Roca Tió, Ramon
Diverse initiatives around the world show the feasibility to build bottom-up community networking infrastructures to join the Internet. However, an experimental network by and for hackers has very different implications at all levels compared to a general-purpose production network for an entire population. Scalability in the design of community networks (CNs) makes the difference between clubs with entry barriers of complexity and limited service and extensible network commons able to accommodate and serve every user in an area. In this paper, we analyse the overall strategies and tackle scalability from what we consider the four main dimensions of CNs: social, legal, economic, and technological dimensions. We utilise the experience and lessons learned from guifi.net and other CNs to illustrate the discussion and the ways to achieve scalability in CNs., This work was funded by the Beyond the Net program from the Internet Society, the EU netCommons contract H2020-688768, the Spanish Government contract TIN2016-77836-C2-2-R, the Generalitat de Catalunya as Consolidated Research Group 2017SGR-990 and the Industrial doctorate contract DI-006, the guifi.net Foundation, and the Association for Progressive Communications., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

MeshDapp: Blockchain-enabled sustainable business models for networks

  • Dimogerontakis, Emmanouil
  • Navarro Moldes, Leandro
  • Selimi, Mennan
  • Mosquera Dopico, Sergio
  • Freitag, Fèlix
The digital world demands a network infrastructure to supply connectivity to any participant anywhere. Sustainable networks require balanced value flows. Value is connectivity delivered at a material and service cost to compensate, involving diverse participants, ranging from consumers to providers, such as last mile access, regional transport, Internet carriers, or content providers. We focus on the case of wireless mesh networks that deliver connectivity through access points and a mesh network that routes traffic to Internet gateways, provisioned by several device owners and service operators [1, 2, 3]. The presented work is motivated by the need for balance and automation among services delivered, costs and incentives for participation in these decentralised networks. This balance is key for achieving extensible network infrastructures that can deliver widespread availability of Internet connectivity with minimal barriers of entry., This paper has been partially supported by the AmmbrTech Group, the Spanish government TIN2016-77836-C2-2-R and the Catalan government AGAUR SGR 990., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

End user-managed service deployments in microclouds at the network edge

  • Freitag, Fèlix
  • Navarro Moldes, Leandro
  • Selimi, Mennan
  • Pueyo Centelles, Roger
Cloud computing is moving from data centers to the network edge. Edge computing introduces lightweight computing devices closer to where data are produced. Local processing enables faster response times for cloud-based services. In this approach, however, cloud elasticity still lies in the data center and not at the edge, and an edge device cannot run services locally beyond its capacity. In this paper we present microclouds as an end user-managed infrastructure built from low-cost home servers leveraging PaaS and SaaS at the network edge. We discuss the following aspects: 1) the microcloud platform architecture and the facilities it offers to the users to manage their services and applications, 2) support services to enable the microcloud provision, and 3) of a number of decentralized applications and their potential to support service provision in microclouds., This work was supported by the European H2020 framework programme project LightKone (H2020-732505), by the Spanish government contract TIN2016-77836-C2-2-R, and by the Catalan government contract AGAUR SGR 990., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A low-cost multicomputer for teaching environments

  • Aliagas, Carles
  • García Famoso, Montserrat
  • Meseguer Pallarès, Roc
  • Millán Marco, Pere
  • Molina Clemente, Carlos Maria
© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, We propose a teaching resource that uses Hard Kernel boards to build an MPI server with 256 cores. Although this system has a relatively low performance, the aim is to provide access to hundreds of cores for carrying out scalability analyses, while obtaining a good trade-off between performance, price, and energy consumption. Here, we give details about the implementation of this system at both the hardware and software levels. We also explain how it was used to teach parallel programming in a university degree course, and discuss the teachers’ and students’ comments about using this new system., This work has been funded by the Government of Spain undercontractsTIN2016-77836-C2-1-R, TIN2016-77836-C2-2-R,TIN2016-75344-R and DPI2016-77415-R, and by the Governmentof Catalonia as Consolidated Research Groups 2017-SGR-688 and 2017-SGR-990, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Collaborative informed gateway selection in large-scale and heterogeneous

  • Batbayar, Khulan
  • Dimogerontakis, Emmanouil
  • Meseguer Pallarès, Roc
  • Navarro Moldes, Leandro
  • Sadre, Ramin
In wireless community access networks, clients tend to reach the Internet through multiple gateway nodes instead of a single default gateway. The mapping of gateways to clients should take into account the perception of network performance from each client node. Network conditions and traffic load can fluctuate and make repeated client-gateway measurements necessary. However, frequent measurements would result in a high communication overhead as well as high processing overhead in gateways and clients. We propose a lightweight client-side gateway selection algorithm by crowd-sourcing monitoring information from neighbor clients, without requiring explicit topology information or a detailed view of the network, while providing an accurate selection as compared to an ideal omniscient approach. Our collaborative gateway selection algorithm achieves good end-to-end performance, such as low latency perceived at client nodes, and fair distribution of the measurements over the gateway nodes. The number of performance measurements triggered by clients are reduced drastically, from n down to 2 measurements per node in each period. An experimental evaluation of our approach shows more than 80% similarity estimation of the gateway performance in the majority of the considered cases. We propose two variants of the gateway selection algorithm, collaborative-best and collaborative-fair, which yield near optimal gateway selection while utilizing partial information., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A role-based software architecture to support mobile service computing in IoT scenarios

  • Finochietto, Mariano
  • Eggly, Gabriel
  • Santos, Rodrigo
  • Orozco, Javier
  • Ochoa, Sergio
  • Meseguer Pallarès, Roc
The interaction among components of an IoT-based system usually requires using low latency or real time for message delivery, depending on the application needs and the quality of the communication links among the components. Moreover, in some cases, this interaction should consider the use of communication links with poor or uncertain Quality of Service (QoS). Research efforts in communication support for IoT scenarios have overlooked the challenge of providing real-time interaction support in unstable links, making these systems use dedicated networks that are expensive and usually limited in terms of physical coverage and robustness. This paper presents an alternative to address such a communication challenge, through the use of a model that allows soft real-time interaction among components of an IoT-based system. The behavior of the proposed model was validated using state machine theory, opening an opportunity to explore a whole new branch of smart distributed solutions and to extend the state-of-the-art and the-state-of-the-practice in this particular IoT study scenario., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Demo abstract: Towards IoT service deployments on edge community network microclouds

  • Khan, Amin M.
  • Freitag, Fèlix
  • Vlassov, Vladimir
  • Ha, Phuong Hoai
Internet of Things (IoT) services for personal devices and smart homes provided by commercial solutions are typically proprietary and closed. These services provide little control to the end users, for instance to take ownership of their data and enabling services, which hinders these solutions' wider acceptance. In this demo paper, we argue for an approach to deploy professional IoT services on user-controlled infrastructure at the network edge. The users would benefit from the ability to choose the most suitable service from different IoT service offerings, like the one which satisfies their privacy requirements, and third-party service providers could offer more tailored IoT services at customer premises. We conduct the demonstration on microclouds, which have been built with the Cloudy platform in the Guifi.net community network. The demonstration is conducted from the perspective of end users, who wish to deploy professional IoT data management and analytics services in volunteer microclouds., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Blockchain for economically sustainable wireless mesh networks

  • Kabbinale, A.R.
  • Dimogerontakis, Emmanouil
  • Selimi, Mennan
  • Ali, Anwaar
  • Navarro Moldes, Leandro
  • Sathiaseelan, Arjuna
  • Crowcroft, Jon
This is the peer reviewed version of the following article: Kabbinale, AR, Dimogerontakis, E, Selimi, M, et al. Blockchain for economically sustainable wireless mesh networks. Concurrency Computat Pract Exper. 2020; 32:e5349, which has been published in final form at https://doi.org/10.1002/cpe.5349. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving., Decentralization, in the form of mesh networking and blockchain, two promising technologies, is coming to the telecommunications industry. Mesh networking allows wider low-cost Internet access with infrastructures built from routers contributed by diverse owners, whereas blockchain enables transparency and accountability for investments, revenue, or other forms of economic compensations from sharing of network traffic, content, and services. Crowdsourcing network coverage, combined with crowdfunding costs, can create economically sustainable yet decentralized Internet access. This means that every participant can invest in resources and pay or be paid for usage to recover the costs of network devices and maintenance. While mesh networks and mesh routing protocols enable self-organized networks that expand organically, cryptocurrencies and smart contracts enable the economic coordination among network providers and consumers. We explore and evaluate two existing blockchain software stacks, Hyperledger Fabric (HLF) and Ethereum geth with Proof of Authority (PoA) intended as a local lightweight distributed ledger, deployed in a real city-wide production mesh network and in laboratory network. We quantify the performance and bottlenecks and identify the current limitations and opportunities for improvement to serve locally the needs of wireless mesh networks, without the privacy and economic cost of relying on public blockchains., This paper has been supported by the AmmbrTech Group, the Spanish Government TIN2016‐77836‐C2‐2‐R and the European Community H2020 Programme netCommons (H2020‐688768). The authors would like to thank the people from the Guifi.net (Guifi‐Sants) community network for hosting the servers and supporting the experiments., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

PiCasso: enabling information-centric multi-tenancy at the edge of community mesh networks

  • Selimi, Mennan
  • Lertsinsrubtavee, Adisorn
  • Sathiaseelan, Arjuna
  • Cerdà Alabern, Llorenç
  • Navarro Moldes, Leandro
© 2019 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Edge computing is radically shaping the way Internet services are run by enabling computations to be available close to the users - thus mitigating the latency and performance challenges faced in today’s Internet infrastructure. Emerging markets, rural and remote communities are further away from the cloud and edge computing has indeed become an essential panacea. Many solutions have been recently proposed to facilitate efficient service delivery in edge data centers. However, we argue that those solutions cannot fully support the operations in Community Mesh Networks (CMNs) since the network connection may be less reliable and exhibit variable performance. In this paper, we propose to leverage lightweight virtualisation, Information-Centric Networking (ICN), and service deployment algorithms to overcome these limitations. The proposal is implemented in the PiCasso system, which utilises in-network caching and name based routing of ICN, combined with our HANET (HArdware and NETwork Resources) service deployment heuristic, to optimise the forwarding path of service delivery in a network zone. We analyse the data collected from the Guifi.net Sants network zone, to develop a smart heuristic for the service deployment in that zone. Through a real deployment in Guifi.net, we show that HANET improves the response time up to 53% and 28.7% for stateless and stateful services respectively. PiCasso achieves 43% traffic reduction on service delivery in our real deployment, compared to the traditional host-centric communication. The overall effect of our ICN platform is that most content and service delivery requests can be satisfied very close to the client device, many times just one hop away, decoupling QoS from intra-network traffic and origin server load., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

DIMON: Distributed Monitoring System for decentralized edge clouds in Guifi.net

  • Pueyo Centelles, Roger
  • Selimi, Mennan
  • Freitag, Fèlix
  • Navarro Moldes, Leandro
Community-built telecommunication networks such as Guifi.net demonstrate how end users can actively collaborate in the self-provision of network services, for instance by operating a self-organized distributed monitoring system. Network monitoring is performed by many small servers at the users' premises but data are only accessible via a centralized interface. Besides, due to network partitions and churn of the monitoring servers, failures in the monitoring system are frequent, leaving parts of the network unmonitored. Distributed databases are a promising solution for data replication under network partition condition, but they suffer from a trade-off between data consistency and availability. Furthermore, these databases are used in data centers with abundant computing resources, not in light edge networks. In this work we present DIMON, a reliable edge-based, eventually-consistent monitoring system that leverages CRDT-based data structures implemented in AntidoteDB. Conflict-free replicated data types (CRDTs) are able to converge to a consistent state in environments with network partitions as those found in edge networks. Our results give insights on the load of AntidoteDB on edge devices under different scenarios of read and write operations. The experiments carried out in a production network with a real system implemented contribute to the research community's knowledge about the available technologies for a consistent replicated data storage layer to support edge computing clouds., This work was supported by the European H2020 framework programme project LightKone (H2020-732505), by the Spanish government under contract TIN2016-77836-C2-2-R and the Catalan government AGAUR SGR 990., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

A LoRa-Based communication system for coordinated response in an earthquake Aftermath

  • Pueyo Centelles, Roger
  • Freitag, Fèlix
  • Meseguer Pallarès, Roc
  • Navarro Moldes, Leandro
  • Ochoa, Sergio
  • Santos, Rodrigo M.
The response conducted by emergency units after natural disasters, such as earthquakes, has to be coordinated, fast, and efficient in order to rescue and care for the victims, keeping all the population—and the units themselves—safe amidst the usual chaos. Outages in wireless networks, as well as fiber- or copper-based landline and Internet connections, are to be expected in these situations, so alternative communication solutions must be considered. To contribute in this duty, we propose a communication system that uses the LoRaWAN architecture to allow citizens to report their status to emergency units and public authorities with simple messages and interaction mechanisms. The purpose of this system is to keep people and first responders connected, and thus improve the capability to coordinate the evacuation activities. To analyze the system performance and capabilities, we model a district of Coquimbo, a harbor town in Chile that houses approximately 28,000 people in 7500 homes, and simulate it with a baseline configuration. We explore several settings for the system in order to determine its characteristics and limitations, to better understand its scalability and portability to other environments, and to outline the remaining challenges to make the system attain specific performance guarantees., This work was supported by the European H2020 framework programme project LightKone (H2020-732505), by the Spanish government under contract TIN2016-77836-C2-2-R, and by the Catalan government under contract AGAUR SGR 990., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Towards blockchain-enabled wireless mesh networks

  • Selimi, Mennan
  • Kabbinale, A.R.
  • Ali, A.
  • Navarro Moldes, Leandro
  • Sathiaseelan, Arjuna
Recently, mesh networking and blockchain are two of the hottest technologies in the telecommunications industry. Combining both can reformulate Internet access. While mesh networking makes connecting to the Internet easy and affordable, blockchain on top of mesh networks makes Internet access profitable by enabling bandwidth-sharing for crypto-tokens. Hyperledger Fabric (HLF) is a blockchain framework implementation and one of the Hyperledger projects hosted by The Linux Foundation. We evaluate HLF in a real production mesh network and in the laboratory. We quantify the performance, bottlenecks and limitations of the current implementation v1.0. We identify the opportunities for improvement to serve the needs of wireless mesh access networks. To the best of our knowledge, this is the first HLF deployment made in a production wireless mesh network., Peer Reviewed, Postprint (published version)