Pasar al contenido principal

PLATAFORMA PARA LA PUBLICACION Y CONSUMO DE DATOS ABIERTOS PARA UNA CIUDAD INTELIGENTE

TIN2016-78103-C2-2-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 18
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Non-deterministic outlier detection method based on the variable precision rough set model

  • Fernández Oliva, Alberto
  • Maciá Pérez, Francisco
  • Berna-Martinez, Jose Vicente
  • Abreu Ortega, Miguel
  • Berna-Martinez, Jose Vicente|||/items/d89949d5-e966-4e05-8193-a93f521aaee9
  • Maciá Pérez, Francisco|||/items/d1d57e2c-747e-4d9c-9667-1599bf13111b
This study presents a method for the detection of outliers based on the Variable Precision Rough Set Model (VPRSM). The basis of this model is the generalisation of the standard concept of a set inclusion relation on which the Rough Set Basic Model (RSBM) is based. The primary contribution of this study is the improvement in detection quality, which is achieved due to the generalisation allowed by the classification system that allows a certain degree of uncertainty. From this method, a computationally efficient algorithm is proposed. The experiments performed with a real scenario and a comparison of the results with the RSBM-based method demonstrate the effectiveness of the method as well as the algorithm’s efficiency in diverse contexts, which also involve large amounts of data.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Evaluating the Effect of Developers’ Personality and Productivity on their Intention to Use Model-Driven Web Engineering Techniques: An Exploratory Observational Study

  • Toala Sánchez, Glenda
  • Cachero, Cristina
  • Meliá, Santiago
  • Cachero, Cristina|||/items/9ee1ce05-0cb5-42ea-9e13-c69efcd58606
  • Meliá, Santiago|||/items/f44a8d6b-5912-48e3-9f3d-117f5f2f5efc
Context: During the last decades, MDWE approaches have claimed important advantages in terms of short and long term productivity gains. However, the extent of such objective gains is still not clear. Moreover, despite such gains, they suffer from a low level of adoption. Being a complex socio-technical activity, not only productivity but also individual developer’s characteristics such as personality are potential explanatory factors of such situation. Objective: To study the relationship between (a) intention to use MDWE approaches and (b) individual personality and productivity factors. Method: We have proposed a conceptual model that has guided the design of an observational study with 77 subjects from the University of Alicante. After following an MDWE course, the subjects were measured in terms of their psychological profile, their productivity and their intention to use an MDWE approach in the future. Results: The study shows that higher levels of neuroticism relate with lower intention to use MDWE: subjects rating high in this dimension regard MDWE as significantly more difficult to use, and they show lower interest in using MDWE in future developments. Also, it shows how highly effective MDWE developers express a higher intention to use the approach. Conclusions: According to our data, in order to reach a wider audience, MDWE approaches need to improve their ease of use, and limit the amount of potential developer’s stressors. Also, our data suggest that the MDWE community should focus on improving the effectiveness of the developers, since it is the increased effectiveness rather than the efficiency what is significantly related with the intention to use MDWE in the future.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Conceptualising IT Consulting Services: An Approach from IT-Business Alignment Models and Design Sciences

  • Maciá Pérez, Francisco
  • Berna-Martinez, Jose Vicente
  • López Paz, Carlos Ramón
  • Sánchez Bernabeu, José Manuel
  • Berna-Martinez, Jose Vicente|||/items/d89949d5-e966-4e05-8193-a93f521aaee9
  • Maciá Pérez, Francisco|||/items/d1d57e2c-747e-4d9c-9667-1599bf13111b
The constant integration of business and manufacturing processes is a difficult task that can be facilitated through IT consulting services. However, if these services do not adequately address the problems of alignment between IT and business, efficiency in integration can be seriously compromised. This article presents a methodology that systematises IT consulting services for the acquisition, incorporation, and integration of IT elements in an organisation in such a way that is aligned with the business and by contemplating its contribution to the value chain. The proposal is based on a set of rules, methods, guidelines, patterns, and artefacts that define a flow of action and implement a strategy that provides a consulting solution as a final result. Likewise, a method is proposed to evaluate the applied methodology and the solution obtained. For validation of the method, a set of business processes based on a case study applied in several Cuban companies related to the food sector has been defined to help adjust the parameters and corroborate the generalisation of the proposal. This research allows to ensure the alignment of business and IT to avoid the failure in the incorporation of IT to companies. It also analyzes and establishes the ideal artefacts for IT consulting and generates an IT consulting methodology that makes the analysis of consultants more robust in order to guarantee the success of incorporating IT into companies.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Evaluating different i*-based approaches for selecting functional requirements while balancing and optimizing non-functional requirements: A controlled experiment

  • Zubcoff, Jose
  • Garrigós, Irene
  • Casteleyn, Sven
  • Mazón, Jose-Norberto
  • Aguilar Calderón, José Alfonso
  • Gomariz Castillo, Francisco José
  • Garrigós, Irene|||/items/50e21847-f541-4051-8e6d-4064e0e80ea3
  • Mazón, Jose-Norberto|||/items/31f8766d-f389-4889-ba06-adeb367a0753
  • Zubcoff, Jose|||/items/c8d086dc-e561-4ce4-9d9b-2db5c48a75f5
Context: A relevant question in requirements engineering is which set of functional requirements (FR) to prioritize and implement, while keeping non-functional requirements (NFR) balanced and optimized. Objective: We aim to provide empirical evidence that requirement engineers may perform better at the task of selecting FRs while optimizing and balancing NFRs using an alternative (automated) i* post-processed model, compared to the original i* model. Method: We performed a controlled experiment, designed to compare the original i* graphical notation, with our post-processed i* visualizations based on Pareto efficiency (a tabular and a radar chart visualization). Our experiment consisted of solving different exercises of various complexity for selecting FRs while balancing NFR. We considered the efficiency (time spent to correctly answer exercises), and the effectiveness (regarding time: time spent to solve exercises, independent of correctness; and regarding correctness of the answer, independent of time). Results: The efficiency analysis shows it is 3.51 times more likely to solve exercises correctly with our tabular and radar chart visualizations than with i*. Actually, i* was the most time-consuming (effectiveness regarding time), had a lower number of correct answers (effectiveness regarding correctness), and was affected by complexity. Visual or textual preference of the subjects had no effect on the score. Beginners took more time to solve exercises than experts if i* is used (no distinction if our Pareto-based visualizations are used). Conclusion: For complex model instances, the Pareto front based tabular visualization results in more correct answers, compared to radar chart visualization. When we consider effectiveness regarding time, the i* graphical notation is the most time consuming visualization, independent of the complexity of the exercise. Finally, regarding efficiency, subjects consume less time when using radar chart visualization than tabular visualization, and even more so compared to the original i* graphical notation.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Improving Open Data Web API Documentation through Interactivity and Natural Language Generation

  • González Mora, César
  • Barros, Cristina
  • Garrigós, Irene
  • Zubcoff, Jose
  • Lloret, Elena
  • Mazón, Jose-Norberto
  • Garrigós, Irene|||/items/50e21847-f541-4051-8e6d-4064e0e80ea3
  • González Mora, César|||/items/bffa7ade-023b-4e37-893a-cf0aa181e2d4
  • Lloret, Elena|||/items/4593ef69-8308-49d3-8f0f-17e6ee078be5
  • Mazón, Jose-Norberto|||/items/31f8766d-f389-4889-ba06-adeb367a0753
  • Zubcoff, Jose|||/items/c8d086dc-e561-4ce4-9d9b-2db5c48a75f5
Widely adoption of Information Technologies has resulted in the continuous growing of open data available on the Web. However, the lack of suitable mechanisms to understand open data sources hampers its reusability. One way to overcome this limitation is by means of Web Application Programming Interfaces (APIs) with proper documentation, nowadays being the existing very rudimentary, hard to follow, and sometimes incomplete or even inaccurate in most cases. In order to improve the documentation of Web APIs that access open data, this paper proposes a novel approach to automatically generate interactive Web API documentation, both machine and user readable. This process starts by analysing the documentation of an API to obtain important information, automatically constructing Natural Language descriptions of the main Web API concepts by applying Natural Language Processing (NLP), and specifically, language generation techniques. Then, the documentation is made interactive by making it available as a Web interface, offering easy access to open data provided by Web APIs. Therefore, the use and comprehension of the Web APIs is facilitated, thus promoting the reusability of open data. The feasibility of our approach is presented through a case study and an experiment with users, both showing the benefits of our approach.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Model-Driven Development of Web APIs to Access Integrated Tabular Open Data

  • González Mora, César
  • Tomás, David
  • Garrigós, Irene
  • Zubcoff, Jose
  • Mazón, Jose-Norberto
  • Garrigós, Irene|||/items/50e21847-f541-4051-8e6d-4064e0e80ea3
  • González Mora, César|||/items/bffa7ade-023b-4e37-893a-cf0aa181e2d4
  • Mazón, Jose-Norberto|||/items/31f8766d-f389-4889-ba06-adeb367a0753
  • Tomás, David|||/items/cf031fc3-3c30-454b-a6df-3762c29cc296
  • Zubcoff, Jose|||/items/c8d086dc-e561-4ce4-9d9b-2db5c48a75f5
More and more governments around the world are publishing tabular open data, mainly in formats such as CSV or XLS(X). These datasets are mostly individually published, i.e. each publisher exposes its data on the Web without considering potential relationships with other datasets (from its own or from other publishers). As a result, reusing several open datasets together is not a trivial task, thus requiring mechanisms that allow data consumers (as software developers or data scientists) to integrate and access tabular open data published on the Web. In this paper, we propose a model-driven approach to automatically generate Web APIs that homogeneously access multiple integrated tabular open datasets. This work focuses on data that can be integrated by means of join and union operations. As a first step, our approach detects unionable and joinable tabular open data by using a table similarity measure based on word embeddings. Then, an APIfication process is developed to create APIs that access the previously integrated datasets through a single endpoint. A running example is presented throughout the article, as well as a set of experiments for performance evaluation to show the feasibility of our approach.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

S3Mining: A model-driven engineering approach for supporting novice data miners in selecting suitable classifiers

  • Espinosa, Roberto
  • García-Saiz, Diego
  • Zorrilla Pantaleón, Marta
  • Zubcoff, Jose
  • Mazón, Jose-Norberto
  • Mazón, Jose-Norberto|||/items/31f8766d-f389-4889-ba06-adeb367a0753
  • Zubcoff, Jose|||/items/c8d086dc-e561-4ce4-9d9b-2db5c48a75f5
Data mining has proven to be very useful in order to extract information from data in many different contexts. However, due to the complexity of data mining techniques, it is required the know-how of an expert in this field to select and use them. Actually, adequately applying data mining is out of the reach of novice users which have expertise in their area of work, but lack skills to employ these techniques. In this paper, we use both model-driven engineering and scientific workflow standards and tools in order to develop named S3Mining framework, which supports novice users in the process of selecting the data mining classification algorithm that better fits with their data and goal. To this aim, this selection process uses the past experiences of expert data miners with the application of classification techniques over their own datasets. The contributions of our S3Mining framework are as follows: (i) an approach to create a knowledge base which stores the past experiences of experts users, (ii) a process that provides the expert users with utilities for the construction of classifiers’ recommenders based on the existing knowledge base, (iii) a system that allows novice data miners to use these recommenders for discovering the classifiers that better fit for solving their problem at hand, and (iv) a public implementation of the framework’s workflows. Finally, an experimental evaluation has been conducted to shown the feasibility of our framework.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Augmenting Websites with Voice Commands: An Approach Focused on Accessibility

  • González Mora, César
  • Garrigós, Irene
  • Casteleyn, Sven
  • Firmenich, Sergio
  • Garrigós, Irene|||/items/50e21847-f541-4051-8e6d-4064e0e80ea3
  • González Mora, César|||/items/bffa7ade-023b-4e37-893a-cf0aa181e2d4
Even now, users with disabilities encounter serious barriers when accessing the Web. In particular, blind and visually impaired users encounter difficulties browsing and reading the contents of a website. Screen readers provide some assistance, yet, as they are unable to interpret the Web structure, they summarise information and read specific labelled fragments. Therefore, the overall comprehension of the text remains challenging. In this sense, in order to improve the accessibility of websites on the fly, we propose a Web augmentation framework for accessibility (WAFRA). Our framework uses Web augmentation techniques that extend the website with voice interaction and new actions: label text fragments, read aloud these fragments, facilitate navigation, increase font size and show videos. In order to perform this accessibility improvement, we automatically provide annotations from DBPedia regarding important information for end users. Moreover, we also provide the option that intermediary users add new annotations for labelling or including more specific information, which can be shared with other users by crowdsourcing. The evaluation of the framework shows its usefulness to ease website access for users with visual disabilities compared to using screen readers.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Impact of Programming Exposure on the Development of Computational Thinking Capabilities: An Empirical Study

  • Cachero, Cristina
  • Barra Hernández, Pilar
  • Meliá, Santiago
  • López, Otoniel
  • Cachero, Cristina|||/items/9ee1ce05-0cb5-42ea-9e13-c69efcd58606
  • Meliá, Santiago|||/items/f44a8d6b-5912-48e3-9f3d-117f5f2f5efc
Today’s digital society has turned the development of students’ computational thinking capabilities into a critical factor for their future success. As higher education institutions, we need to take responsibility for this development in every degree course we offer, and provide students with the kind of subjects and activities that best contribute to this aim. In this paper, we study the impact of following an introductory programming course on the development of the computational thinking capabilities of university students. In order to achieve this aim, a concurrent cohort observational study was carried out in which we measured both the subjective and objective computational thinking capabilities of 104 participants (50 first year students enrolled on a Bachelor’s degree course in Psychology at the Catholic University of Murcia (UCAM), and 54 first year students enrolled on a Bachelor’s degree course in Health Information Systems at the University of Alicante (UA)). The statistical procedures applied to test our hypotheses were a two-way mixed ANOVA, a paired-sample T-test and an independent-sample T-test. The data shows that the group at UA had an initial higher subjective perception of their computational capabilities than the group at UCAM. This perception was supported by their objective scores, which were also significantly higher. However, the subjective assessment of computational capability of the UA group diminished after exposure to the programming course, contrasting with the fact that their objective computational capabilities improved significantly. In the UCAM group, both subjective and objective capabilities remained constant over time. Based on these results, we can conclude that computational thinking capabilities are not developed naturally, but need to be trained. Providing such training to all our students, and not only to those enrolled on undergraduate degrees in engineering, is of paramount importance to allow them to face the challenges of their future professions. This paper empirically demonstrates the extent to which exposing subjects to a programming course may contribute to this aim.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Impact of model notations on the productivity of domain modelling: an empirical study

  • Cachero, Cristina
  • Meliá, Santiago
  • Hermida Carbonell, Jesús María
  • Cachero, Cristina|||/items/9ee1ce05-0cb5-42ea-9e13-c69efcd58606
  • Meliá, Santiago|||/items/f44a8d6b-5912-48e3-9f3d-117f5f2f5efc
Context: The intensive use of models is a cornerstone of the Model-Driven Engineering (MDE) paradigm and its claimed gains in productivity. However, in order to maximize these productivity gains, it is important to adequately select the modeling formalism to be used. Unfortunately, the MDE community still lacks empirical data to support such choice. Objective: This paper aims at contributing to filling this gap by reporting an empirical study in which two types of domain model notations, graphical vs. textual, are compared regarding their efficiency and effectiveness during the creation of domain models. Method: A quasi-experiment was designed in which 127 participants were randomly classified in four groups. Then, each group was randomly assigned to a different combination of notation and application. All the participants were students enrolled in the 6th semester of the Computer Engineering degree at the University of Alicante. The statistical procedure applied was a two-factor multivariate analysis of variance (two-way MANOVA). Results: The data shows a statistically significant effect of notation type on the efficiency and effectiveness of domain modelling activities, independently from the application being modelled. Conclusions: The joint examination of our results and those of previous studies suggests that, in MDE, different tasks call for different types of notations. Therefore, MDE environments should offer both textual and graphical notations, and assist developers in selecting the most suitable one depending on the task being carried out. In particular, our data suggest that domain model creation tasks are better supported by graphical notations. To augment the validity of the conclusions of this paper, the experiment should be replicated with different subject profiles, notations, domain model sizes, tasks and application types.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Open Data Consumption Through the Generation of Disposable Web APIs

  • Cáceres García de Marina, Paloma
  • Cavero Barca, José María
  • Cuesta, Carlos E.
  • Garrido, Miguel Ángel
  • Garrigós, Irene
  • González Mora, César
  • Mazón, Jose-Norberto
  • Sierra-Alonso, Almudena
  • Vela, Belén
  • Zubcoff, Jose
  • Garrigós, Irene|||/items/50e21847-f541-4051-8e6d-4064e0e80ea3
  • González Mora, César|||/items/bffa7ade-023b-4e37-893a-cf0aa181e2d4
  • Mazón, Jose-Norberto|||/items/31f8766d-f389-4889-ba06-adeb367a0753
  • Zubcoff, Jose|||/items/c8d086dc-e561-4ce4-9d9b-2db5c48a75f5
The ever-growing amount of information in today’s world has led to the publication of more and more open data, i.e., that which is available in a free and reusable manner, on the Web. Open data is considered highly valuable in situational scenarios, in which thematic data is required for a short life cycle by a small group of consumers with specific needs. In this context, data consumers (developers or data scientists) need mechanisms with which to easily assess whether the data is adequate for their purpose. SPARQL endpoints have become very useful for the consumption of open data, but we argue that its steep learning curve hampers open data reuse in situational scenarios. In order to overcome this pitfall, in this paper, we coin the term disposable Web APIs as an alternative mechanism for the consumption of open data in situational scenarios. Disposable Web APIs are created on-the-fly to be used temporarily by a user to consume open data. In this paper we specifically describe an approach with which to leverage semantic information from data sources so as to automatically generate easy-to-use disposable Web APIs that can be used to access open data in a situational scenario, thus avoiding the complexity and learning curve of SPARQL and the effort of manually processing the data. We have conducted several experiments to discover whether non-experienced users find it easier to use our disposable Web API or a SPARQL endpoint to access open data. The results of the experiments led us to conclude that, in a situational scenario, it is easier and faster to use the Web API than the corresponding SPARQL endpoint in order to consume open data.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Framework for Prioritization of Open Data Publication: An Application to Smart Cities

  • Prieto, Alvaro E.
  • Mazón, Jose-Norberto
  • Lozano-Tello, Adolfo
  • Mazón, Jose-Norberto|||/items/31f8766d-f389-4889-ba06-adeb367a0753
Public Sector Information is considered to play a fundamental role in the growth of the knowledge economy and improvements in society. Given the difficulty in publishing and maintaining all available data, due to budget constraints, institutions need to select which data to publish, giving priority to data most likely to generate social and economic impact. Priority of publication could become an even more significant problem in Smart Cities: as huge amounts of information are generated from different domains, the way data is prioritized and thus reused, could be a determining factor in promoting, among others, new and sustainable business opportunities for local entrepreneurs, and to improve citizen quality of life. However, people in charge of prioritizing which data to publish through open data portals (such as Chief Data Officers, or CDOs) do not have available any specific support in their decision-making process. In this work, a proposal of a framework for prioritization of open data publication as well as its application to Smart Cities is presented. This specific application of the framework relies on OSS (Open Source Software) indicators to help making decisions on the most relevant data to publish focused on developers and businesses operating within the Smart City context.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Engineering Web Augmentation software: A development method for enabling end-user maintenance

  • Firmenich, Diego
  • Firmenich, Sergio
  • Rossi, Gustavo
  • Wimmer, Manuel
  • Garrigós, Irene
  • González Mora, César
  • Garrigós, Irene|||/items/50e21847-f541-4051-8e6d-4064e0e80ea3
  • González Mora, César|||/items/bffa7ade-023b-4e37-893a-cf0aa181e2d4
Nowadays, end-users are able to adapt Web applications when some of their requirements have not been taken into account by developers. One possible way to do adaptations is by using Web Augmentation techniques. Web Augmentation allows end-users to modify the Web sites’ user interfaces once these are loaded on the client-side, i.e., in the browser. They achieve these adaptations by developing and/or installing Web browser plugins (“augmenters”) that modify the user interface with new functionalities. This particular kind of software artifacts requires special attention regarding maintenance as–in most cases–they depend on third-party resources, such as HTML pages. When these resources are upgraded, unexpected results during the augmentation process may occur. Many communities have arisen around Web Augmentation, and today there are large repositories where developers share their augmenters; end-users may give feedback about existing augmentations and even ask for new ones. Maintenance is a key phase in the augmenters’ life-cycle, and currently, this task falls (as usual) on the developers. In this paper, we present a participatory approach for allowing end-users without programming skills to participate in the augmenters’ maintenance phase. In order to allow this, we also provide support for the development phase to bootstrap a first version of the augmenter and to reduce the load on developers in both phases, development and maintenance. We present an analysis of more than eight thousand augmenters, which helped us devise the approach. Finally, we present an experiment with 48 participants to validate our approach.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Modelling and Implementing Smart Universities: An IT Conceptual Framework

  • Maciá Pérez, Francisco
  • Berna-Martinez, Jose Vicente
  • Lorenzo Fonseca, Iren
  • Berna-Martinez, Jose Vicente|||/items/d89949d5-e966-4e05-8193-a93f521aaee9
  • Lorenzo Fonseca, Iren|||/items/b096d708-b0bd-4696-b4f5-356c24efaa6b
  • Maciá Pérez, Francisco|||/items/d1d57e2c-747e-4d9c-9667-1599bf13111b
The smart city concept has been gaining momentum in the scientific community because of its potentially huge impact on citizens’ quality of life. However, expectations have not yet been met in practice. This is firstly due to the sheer breadth of such projects and secondly to the lack of methodologies available to guide the development of flexible and sustainable platforms over time. In this work, we propose to address these issues by using a university campus as a less complex mock-up version of a city. Despite differences between them, we find services that are common to both, and a medium-sized city’s population is comparable to that of a university community. We propose an IT conceptual framework to model and implement smart university projects, which supports the design of a platform that is both in line with the strategic plans of universities and is flexible, sustainable, stable, and sufficiently modular to support the addition of different value-added services over the years. Our framework is based on a service provision model materialised in an IT architecture and managed following a methodology to integrate IT components that ensure the insertion of new, smart initiatives of value to the community, aligned with the university’s needs, via a value-added service planning process. The results are presented in the University of Alicante case study and the SmartUA project.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Systematic Mapping of Open Data Studies: Classification and Trends From a Technological Perspective

  • Enríquez-Reyes, Robert
  • Cadena-Vela, Susana
  • Fuster-Guilló, Andrés
  • Mazón, Jose-Norberto
  • Ibáñez, Luis Daniel
  • Simperl, Elena
  • Fuster-Guilló, Andrés|||/items/0d96ca87-a50d-4788-b5d3-456c44f8a6b6
  • Mazón, Jose-Norberto|||/items/31f8766d-f389-4889-ba06-adeb367a0753
The objective of this paper is to classify and analyse all research on open data performed in the scientific community from a technological viewpoint, providing a detailed exploration based on six key facets: publication venue, impact, subject, domain, life-cycle phases and type of research. This paper therefore provides a consolidated overview of the open data arena that allows readers to identify well-established topics, trends, and open research issues. Additionally, we provide an extensive qualitative discussion of the most interesting findings to pave the way for future research. Our first identification phase resulted in 893 relevant peer-reviewed articles, published between 2006 and 2019 in a wide variety of venues. Analysis of the results shows that open data research grew slowly from 2006 but increased significantly as from 2009. In 2019, research interest in open data from a technological perspective overall decreased. This fact could indicate that research is beginning to stabilise, i.e., the open data research hype is over, and the research field is reaching maturity. Main findings are (i) increasing effort in researching on Semantic Web technologies as a mechanism to publish and reuse linked open data, (ii) software systems are proposed to solve open data technical problems; and (iii) considering technological aspects of legislation and standardization is needed to widely introduce open data in society. Finally, we provide complementary insights regarding open data innovation projects, with special emphasis on publication (e.g., open data portals) and consumption (e.g., open data as business enabler) of open data.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Selección de conjuntos de datos a publicar en abierto basada en el Método Delphi Difuso

  • Enríquez-Reyes, Robert
Este trabajo de investigación se enfoca inicialmente en la realización de un mapeo sistemático para clasificar y analizar la investigación de datos abiertos realizada en la comunidad científica desde un punto de vista tecnológico, proporcionando una categorización de los trabajos de investigación basada en cinco facetas clave: impacto, tema, dominio, fases y tipo de investigación. Por lo tanto, este documento proporciona una visión general del área de datos abiertos que permite a los lectores identificar temas bien establecidos, tendencias y líneas de investigación abiertas. Además, se ofrece una extensa discusión cuantitativa y cualitativa que puede ser de utilidad para futuras investigaciones. La primera fase de identificación resultó en 671 artículos relevantes revisados por pares, publicados entre 2006 y 2017 en una amplia variedad de lugares. Se observa que el debate actual de la apertura de datos se centra en abrir los datos, especialmente públicos, teniendo en cuenta la ley de transparencia y la de protección de datos de cada país. Sin embargo, el mero cumpliendo de estas leyes no asegura la generación de valor a partir de los datos abiertos, ya que uno de sus beneficios más importantes se consigue cuando se reutilizan para crear productos y servicios TI de valor agregado. Uno de los problemas que necesariamente deben abordar las organizaciones que emprenden procesos de apertura es la selección de los conjuntos de datos a abrir. Se debe conocer qué datos de origen de la institución serían los más usados para generar valor a la sociedad con el fin de seleccionarlos para su apertura. Sin embargo, conocer los conjuntos de datos solicitados por la comunidad reutilizadora no es suficiente, pues publicar los datos tiene un costo en cuanto a hardware, software y recursos humanos que es necesario valorar. Por tanto, es necesario encontrar un equilibrio entre el interés reutilizador de los conjuntos de datos y su coste de publicación. Las propuestas estudiadas no combinan el criterio de los reutilizadores y el de los publicadores, ni utilizan un método formal conduciendo a resultados poco objetivos. En este trabajo de tesis doctoral se propone paliar esta problemática mediante la aplicación del Método Delphi Difuso con el fin de determinar qué conjuntos de datos son más susceptibles de ser reutilizados y qué conjuntos de datos tendrán un costo asumible para su publicación para proceder a su apertura. Se establece, además, a lo largo del trabajo de investigación un caso concreto de aplicación en el ámbito de las universidades ecuatorianas. Estas se encuentran en un proceso constante de innovación y buscan la participación y colaboración de los estudiantes y la comunidad universitaria en general, para generar productos y servicios TI de valor agregado a través de la apertura de sus conjuntos de datos.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Model-based Generation of Web Application Programming Interfaces to Access Open Data

  • González Mora, César
  • Garrigós, Irene
  • Zubcoff, Jose
  • Mazón, Jose-Norberto
  • Garrigós, Irene|||/items/50e21847-f541-4051-8e6d-4064e0e80ea3
  • González Mora, César|||/items/bffa7ade-023b-4e37-893a-cf0aa181e2d4
  • Mazón, Jose-Norberto|||/items/31f8766d-f389-4889-ba06-adeb367a0753
  • Zubcoff, Jose|||/items/c8d086dc-e561-4ce4-9d9b-2db5c48a75f5
In order to facilitate the reusing of open data from open data platforms’ catalogs, Web Application Programming Interfaces (APIs) are an important mechanism for reusers. However, there is a lack of suitable Web APIs to access data from open data platforms. Moreover, in most cases, the currently available APIs only allow to access catalog’s metadata or to download entire data resources (i.e. coarse-grain access to data), hampering the reuse of data. Therefore, we propose a model-based approach to automatically generate Web APIs from open data. Our generated Web APIs facilitate the access and reuse of specific data (i.e., providing fine-grain or query-level access to data), which will result in many societal and economic benefits such as transparency and innovation. With this approach we address open data publishers which will be able to include a Web API within their data, but also open data reusers in case of missing APIs. This APIfication process, which means the creation of APIs for every available dataset, is based on automatic, generic and standardised generation mechanisms. The performance and functioning of this approach is validated with different datasets, which successfully generates Web APIs that facilitate the reuse of data.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

A Method Non-Deterministic and Computationally Viable for Detecting Outliers in Large Datasets

  • Fernández Oliva, Alberto
  • Maciá Pérez, Francisco
  • Berna-Martinez, Jose Vicente
  • Abreu Ortega, Miguel
  • Berna-Martinez, Jose Vicente|||/items/d89949d5-e966-4e05-8193-a93f521aaee9
  • Maciá Pérez, Francisco|||/items/d1d57e2c-747e-4d9c-9667-1599bf13111b
This paper presents an outlier detection method that is based on a Variable Precision Rough Set Model (VPRSM). This method generalizes the standard set inclusion relation, which is the foundation of the Rough Sets Basic Model (RSBM). The main contribution of this research is an improvement in the quality of detection because this generalization allows us to classify when there is some degree of uncertainty. From the proposed method, a computationally viable algorithm for large volumes of data is also introduced. The experiments performed in a real scenario and a comparison of the results with the RSBM-based method demonstrate the efficiency of both the method and the algorithm in diverse contexts that involve large volumes of data.