Pasar al contenido principal

GEOFISICA DE ALTAS PRESTACIONES

TIN2016-80957-P

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario BARCELONA SUPERCOMPUTING CENTER CENTRO NACIONAL DE SUPERCOMPUTACION

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Comparison of expansion-based explicit time-integration schemes for acoustic wave propagation

  • Spa, Carlos
  • Rojas, Otilio
  • Puente, Josep de la
We have developed a von Neumann stability and dispersion analysis of two time-integration techniques in the framework of Fourier pseudospectral (PS) discretizations of the second-order wave equation. The first technique is a rapid expansion method (REM) that uses Chebyshev matrix polynomials to approximate the continuous solution operator of the discrete wave equation. The second technique is a Lax-Wendroff method (LWM) that replaces time derivatives in the Taylor expansion of the solution wavefield with their equivalent spatial PS differentiations. In both time-integration schemes, each expansion term J results in an extra application of the spatial differentiation operator; thus, both methods are similar in terms of their implementation and the freedom to arbitrarily increase accuracy by using more expansion terms. Nevertheless, their limiting Courant-Friedrichs-Lewy stability number S and dispersion inaccuracies behave differently as J varies. We establish the S bounds for both methods in cases of practical use, J≤10, and we confirm the results by numerical simulations. For both schemes, we explore the dispersion dependence on modeling parameters J and S on the wavenumber domain, through a new error metric. This norm weights errors by the source spectrum to adequately measure the accuracy differences. Then, we compare the theoretical computational costs of LWM and REM simulations to attain the same accuracy target by using the efficiency metric J/S. In particular, we find optimal (J,S) pairs that ensure a certain accuracy at a minimal computational cost. We also extend our dispersion analysis to heterogeneous media and find the LWM accuracy to be significantly better for representative J values. Moreover, we perform 2D wave simulations on the SEG/EAGE Salt Model, in which larger REM inaccuracies are clearly observed on waveform comparisons in the range J≤3., C. Spa has received funding from the Chilean Agency CONICYT under the project FONDECYT 11140212, whereas O. Rojas and J. de la Puente have received funding fromthe European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no.777778 MATHROCKS. The research leading to these results hasreceived funding from the European Union’s Horizon 2020 research and innovation programme under the ChEESE project, grant agreement No. 823844. We also acknowledge funding from the Spanish Ministry Project Geofísica de Altas Prestaciones TIN2016-80957-P., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Modeling active fault systems and seismic events by using a fiber bundle model – example case: the Northridge aftershock sequence

  • Monterrubio Velasco, Marisol
  • Zúñiga, F. Ramón
  • Carrasco Jiménez, José Carlos
  • Márquez Ramírez, Víctor
  • Puente, Josep de la
Earthquake aftershocks display spatiotemporal correlations arising from their self-organized critical behavior. Dynamic deterministic modeling of aftershock series is challenging to carry out due to both the physical complexity and uncertainties related to the different parameters which govern the system. Nevertheless, numerical simulations with the help of stochastic models such as the fiber bundle model (FBM) allow the use of an analog of the physical model that produces a statistical behavior with many similarities to real series. FBMs are simple discrete element models that can be characterized by using few parameters. In this work, the aim is to present a new model based on FBM that includes geometrical characteristics of fault systems. In our model, the faults are not described with typical geometric measures such as dip, strike, and slip, but they are incorporated as weak regions in the model domain that could increase the likelihood to generate earthquakes. In order to analyze the sensitivity of the model to input parameters, a parametric study is carried out. Our analysis focuses on aftershock statistics in space, time, and magnitude domains. Moreover, we analyzed the synthetic aftershock sequences properties assuming initial load configurations and suitable conditions to propagate the rupture. As an example case, we have modeled a set of real active faults related to the Northridge, California, earthquake sequence. We compare the simulation results to statistical characteristics from the Northridge sequence determining which range of parameters in our FBM version reproduces the main features observed in real aftershock series. From the results obtained, we observe that two parameters related to the initial load configuration are determinant in obtaining realistic seismicity characteristics: (1) parameter P, which represents the initial probability order, and (2) parameter π, which is the percentage of load distributed to the neighboring cells. The results show that in order to reproduce statistical characteristics of the real sequence, larger πfrac values (0.85<πfrac<0.95) and very low values of P (0.0<P≤0.08) are needed. This implies the important corollary that a very small departure from an initial random load configuration (computed by P), and also a large difference between the load transfer from on-fault segments than by off-faults (computed by πfrac), is required to initiate a rupture sequence which conforms to observed statistical properties such as the Gutenberg–Richter law, Omori law, and fractal dimension., The research leading to these results has received funding from the European Union's Horizon 2020 Programme under the ChEESE Project (https://cheese-coe.eu/), grant agreement no. 823844. This research has been supported by the CONACYT (grant no. 220969), the European Commission (Horizon 2020 (grant nos. 823844 and 777778)), the Spanish Ministry Project (grant no. TIN2016-80957-P), and UNAM-PAPIIT (grant no. IN108115)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Urgent supercomputing of earthquakes: use case for civil protection

  • Puente, Josep de la
  • Rodríguez Rodríguez, Juan Esteban
  • Monterrubio Velasco, Marisol
  • Rojas, Otilio
Deadly earthquakes are events that are unpredictable, relatively rare and have a huge impact upon the lives of those who suffer their consequences. Furthermore, each earthquake has specific characteristics (location, magnitude, directivity) which, combined to local amplification and de-amplification effects, makes their outcome very singular. Empirical relations are the main methodology used to make early assessment of an earthquake's impact. Nevertheless, the lack of sufficient data registers for large events makes such approaches very imprecise. Physics-based simulators, on the other hand, are powerful tools that provide highly accurate shaking information. However, physical simulations require considerable computational resources, a detailed geological model, and accurate earthquake source information. A better early assessment of the impact of earthquakes implies both technical and scientific challenges. We propose a novel HPC-based urgent seismic simulation workflow, hereafter referred to as Urgent Computing Integrated Services for EarthQuakes (UCIS4EQ), which can deliver, potentially, much more accurate short-time reports of the consequences of moderate to large earthquakes. UCIS4EQ is composed of four subsystems that are deployed as services and connected by means of a workflow manager. This paper describes those components and their functionality. The main objective of UCIS4EQ is to produce ground-shaking maps and other potentially useful information to civil protection agencies. The first demonstrator will be deployed in the framework of the Center of Excellence for Exascale in Solid Earth (ChEESE, https://cheese.coe.eu/, last access: 12 Feb. 2020)., The ChEESE project has received funding from the European Union’sHorizon 2020 research and innovation programme under the grantagreement Number 823844. Further funding includes the SpanishMinistry project GAP TIN2016-80957-P, the EU project MATH-ROCKS Number 777778. The Graves-Pitarka Generator is availablethrough the SCEC Broadband Platform version 19.4. We acknowl-edge the assistance by Favio Silva and Phillip Maechling on itscompilation and execution., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Parallel 3-D marine controlled-source electromagnetic modelling using high-order tetrahedral Nédélec elements

  • Castillo Reyes, Octavio
  • de la Puente Álvarez, Josep
  • García-Castillo, Luis Emilio
  • Cela Espín, José M.
We present a parallel and high-order Nédélec finite element solution for the marine controlled-source electromagnetic (CSEM) forward problem in 3-D media with isotropic conductivity. Our parallel Python code is implemented on unstructured tetrahedral meshes, which support multiple-scale structures and bathymetry for general marine 3-D CSEM modelling applications. Based on a primary/secondary field approach, we solve the diffusive form of Maxwell’s equations in the low-frequency domain. We investigate the accuracy and performance advantages of our new high-order algorithm against a low-order implementation proposed in our previous work. The numerical precision of our high-order method has been successfully verified by comparisons against previously published results that are relevant in terms of scale and geological properties. A convergence study confirms that high-order polynomials offer a better trade-off between accuracy and computation time. However, the optimum choice of the polynomial order depends on both the input model and the required accuracy as revealed by our tests. Also, we extend our adaptive-meshing strategy to high-order tetrahedral elements. Using adapted meshes to both physical parameters and high-order schemes, we are able to achieve a significant reduction in computational cost without sacrificing accuracy in the modelling. Furthermore, we demonstrate the excellent performance and quasi-linear scaling of our implementation in a state-of-the-art high-performance computing architecture., This project has received funding from the European Union's Horizon 2020 programme under the Marie Sklodowska-Curie grant agreement No. 777778. Furthermore, the research leading to these results has received funding from the European Union's Horizon 2020 programme under the ChEESE Project (https://cheese-coe.eu/ ), grant agreement No. 823844. In addition, the authors would also like to thank the support of the Ministerio de Educación y Ciencia (Spain) under Projects TEC2016-80386-P and TIN2016-80957-P. The authors would like to thank the Editors-in-Chief and to both reviewers, Dr. Martin Cuma and Dr. Raphael Rochlitz, for their valuable comments and suggestions which helped to improve the quality of the manuscript. This work benefited from the valuable suggestions, comments, and proofreading of Dr. Otilio Rojas (BSC). Last but not least, Octavio Castillo-Reyes thanks Natalia Gutierrez (BSC) for her support in CSEM modeling with BSIT., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A stochastic rupture earthquake code based on the fiber bundle model (TREMOL v0.1): application to Mexican subduction earthquakes

  • Monterrubio-Velasco, Marisol
  • Rodríguez-Pérez, Quetzalcóatl
  • Zúñiga, Ramón
  • Scholz, Doreen
  • Aguilar-Méléndez, Armando
  • de la Puente, Josep
In general terms, earthquakes are the result of brittle failure within the heterogeneous crust of the Earth. However, the rupture process of a heterogeneous material is a complex physical problem that is difficult to model deterministically due to numerous parameters and physical conditions, which are largely unknown. Considering the variability within the parameterization, it is necessary to analyze earthquakes by means of different approaches. Computational physics may offer alternative ways to study brittle rock failure by generating synthetic seismic data based on physical and statistical models and through the use of only few free parameters. The fiber bundle model (FBM) is a stochastic discrete model of material failure, which is able to describe complex rupture processes in heterogeneous materials. In this article, we present a computer code called the stochasTic Rupture Earthquake MOdeL, TREMOL. This code is based on the principle of the FBM to investigate the rupture process of asperities on the earthquake rupture surface. In order to validate TREMOL, we carried out a parametric study to identify the best parameter configuration while minimizing computational efforts. As test cases, we applied the final configuration to 10 Mexican subduction zone earthquakes in order to compare the synthetic results by TREMOL with seismological observations. According to our results, TREMOL is able to model the rupture of an asperity that is essentially defined by two basic dimensions: (1) the size of the fault plane and (2) the size of the maximum asperity within the fault plane. Based on these data and few additional parameters, TREMOL is able to generate numerous earthquakes as well as a maximum magnitude for different scenarios within a reasonable error range. The simulated earthquake magnitudes are of the same order as the real earthquakes. Thus, TREMOL can be used to analyze the behavior of a single asperity or a group of asperities since TREMOL considers the maximum magnitude occurring on a fault plane as a function of the size of the asperity. TREMOL is a simple and flexible model that allows its users to investigate the role of the initial stress configuration and the dimensions and material properties of seismic asperities. Although various assumptions and simplifications are included in the model, we show that TREMOL can be a powerful tool to deliver promising new insights into earthquake rupture processes., The authors are grateful to two anonymous reviewers and the editor for their relevant and constructive comments that have greatly contributed to improving the paper. M. Monterrubio-Velasco and J. de la Puente thank the European Union’s Horizon 2020 Programme under the ChEESE Project (https://cheese-coe.eu/, last access: 1 May 2019), grant agreement no. 823844, for partially funding this work. M. Monterrubio- Velasco and A. Aguilar-Meléndez thank CONACYT for support of this research project. Quetzalcoatl Rodríguez-Pérez was supported by the Mexican National Council for Science and Technology (CONACYT) (Catedras program, project 1126). This project has received funding from the European Union’s Horizon 2020 research and innovation program under Marie Skłodowska-Curie grant agreement no. 777778, MATHROCKS, and from the Spanish Ministry project TIN2016-80957-P. Initial funding for the project through grant UNAM-PAPIIT IN108115 is also gratefully acknowledged., Peer Reviewed, Postprint (published version)