Pasar al contenido principal

DESARROLLO DE NUEVAS TECNOLOGIAS DESTINADAS A REDUCIR EL IMPACTO ACUSTICO DEL TRANSPORTE FERROVIARIO EN ENTORNOS URBANOS

TRA2013-45596-C2-1-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improved railway wheelset-track interaction model in the high-frequency domain

  • Martínez Casas, José|||0000-0001-5706-4951
  • Giner Navarro, Juan|||0000-0002-0513-3625
  • Baeza González, Luis Miguel|||0000-0002-3815-8706
  • F. D. Denia|||0000-0003-4536-8610
[EN] As it is well known, there are various phenomena related to railway train-track interaction, some of them caused by the high frequency dynamics of the system, such as rolling noise when the vehicle runs over the track, as well as squeal noise and short-pitch rail corrugation for curved tracks. Due to these phenomena and some others unsolved so far, a large effort has been made over the last 40 years in order to define suitable models to study the train-track interaction. The introduction of flexibility in wheelset and rail models was required to have a more realistic representation of the wheel-rail interaction effects at high frequencies. In recently published train-track interaction models, the rails are modelled by means of Timoshenko beam elements, valid up to 1.5 kHz for lateral rail vibration and up to 2 kHz for vertical vibration. This confines the frequency range of validity for the complete train-track model to 1.5 kHz. With the purpose of extending the range of validity above 1.5 kHz, a 3D track model based on the Moving Element Method (MEM) is developed in this paper to replace the Timoshenko beam considered in earlier studies, adopting cyclic boundary conditions and Eulerian coordinates. The MEM approach considers a mobile Finite Element (FE) mesh which moves with the vehicle, so the mass of the rail flows with the vehicle speed but in the opposite direction through the mesh. Therefore, the MEM permits to fix the contact area in the middle of a finitely long track and to refine the mesh only around the contact area, where the forces and displacements will be more significant. Additionally, a modal approach is adopted in order to reduce the number of degrees of freedom of the rail model. Both strategies lower substantially the computational cost. Simulation results are presented and discussed for different excitation sources including random rail roughness and singularities such as wheel flats. All the simulation cases are carried out for a Timoshenko beam and a 3D MEM track model in order to point out the differences in the contact forces above the range of validity of the Timoshenko beam., The authors gratefully acknowledge the financial support of Ministerio de Economía y Competitividad and the European Regional Development Fund (project TRA2013-45596-C2-1-R), as well as Generalitat Valenciana (project Prometeo/2012/023) and Ministerio de Educación, Cultura y Deporte (project SP20140659) as part of Programa Campus de Excelencia Internacional.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Modelo mejorado de interacción vehículo ferroviario-vía negociando una curva en el dominio de la alta frecuencia

  • Giner Navarro, Juan|||0000-0002-0513-3625
  • Martínez Casas, José|||0000-0001-5706-4951
  • F. D. Denia|||0000-0003-4536-8610
  • Carballeira, Javier|||0000-0002-4179-8499
[ES] La interacción dinámica entre un vehículo ferroviario y la vía se presenta como un problema complejo dado el acoplamiento vibracional entre ambos subsistemas a través de las fuerzas que aparecen en el área de contacto. Aunque el transporte ferroviario se considera generalmente respetuoso con el medio ambiente, el ruido proveniente de la interacción rueda-carril es un inconveniente relevante que ha recibido especial atención en las últimas décadas. Los chirridos en curva, ruido de fuerte carácter tonal en el dominio de las altas frecuencias, aparecen generalmente cuando el tren negocia una curva cerrada. Con el objetivo de alcanzar una mejor comprensión del fenómeno, se han implementado modelos de Elementos Finitos (EF) de la rueda para incluir su flexibilidad y extender así el rango de frecuencias; recientes trabajos han introducido también los efectos inerciales debidos a la rotación del eje. Por otra parte, se ha desarrollado un modelo flexible de vía cíclica mediante un tipo de elementos finitos conocido como Moving Elements (ME), que permite refinar la malla únicamente alrededor del área de contacto. En el presente artículo, se han llevado a cabo distintas simulaciones en el dominio del tiempo para circulación en vía curva considerando dos radios de curva y cuatro coeficientes de fricción distintos, evaluándose las fuerzas de contacto tangenciales en busca de inestabilidades que puedan estar asociadas a este fenómeno de chirridos en curva. A su vez, se ha estudiado la influencia de los efectos giroscópicos asociados a la rotación del eje., Los autores desean agradecer el apoyo recibido del Ministerio de Economía y Competitividad y del Fondo Europeo de Desarrollo Regional mediante el proyecto TRA2013-45596-C2-1-R, así como a la Generalitat Valenciana mediante los proyectos Prometeo/2016/007 y GV/2016/011 de la Conselleria d¿Educació, Investigació, Cultura i Esport.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Method for obtaining the wheel-rail contact location and its application to the normal problem calculation through CONTACT

  • Baeza González, Luis Miguel|||0000-0002-3815-8706
  • F. D. Denia|||0000-0003-4536-8610
  • Thompson, David J.
  • Squicciarini, Giacomo
[EN] This work presents a robust methodology for calculating inter-penetration areas between railway wheel and rail surfaces, the profiles of which are defined by a series of points. The method allows general three-dimensional displacements of the wheelset to be considered, and its characteristics make it especially suitable for dynamic simulations where the wheel-rail contact is assumed to be flexible. The technique is based on the discretization of the geometries of the surfaces in contact, considering the wheel as a set of truncated cones and the rail as points. By means of this approach, it is possible to reduce the problem to the calculation of the intersections between cones and lines, the solution for which has a closed-form expression. The method has been used in conjunction with the CONTACT algorithm in order to solve the static normal contact problem when the lateral displacement of the wheelset, its yaw angle and the vertical force applied in the wheelset centroid are prescribed. The results consist of smooth functions when the dependent coordinates are represented as a function of the independent ones, lacking the jump discontinuities that are present when a rigid contact model is adopted. Example results are shown and assessed for the normal contact problem for different lateral and yaw positions of the wheelset on the track., This work was supported by the financial contribution of the European Union’s Shift2Rail programme (RUN2Rail project, grant number 777564), the Spanish Ministry of Economy, Industry and Competitiveness and the European Regional Development Fund (projects TRA2013-45596-C2-1-R and TRA2017-84701-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Modelo integral de interacción vehículo-vía que contempla la dinámica de baja y alta frecuencia para circulación en vía recta, transición y curva

  • Martínez Casas, José|||0000-0001-5706-4951
  • Carballeira, Javier|||0000-0002-4179-8499
  • F. D. Denia|||0000-0003-4536-8610
  • Baeza González, Luis Miguel|||0000-0002-3815-8706
[ES] Actualmente hay un elevado interés en analizar ciertos fenómenos ferroviarios que surgen de la interacción dinámica vehículo-vía cuando se negocia una curva, como son el ruido de rodadura, los chirridos y la corrugación de los carriles en curva. En la literatura se detallan, por un lado, modelos de baja frecuencia (hasta 20 Hz) que formulan la dinámica de todo el vehículo completo, y por otro lado, modelos de interacción de alta frecuencia que describen la dinámica de las masas no suspendidas. Sin embargo, para estudiar con precisión los fenómenos citados anteriormente, no sólo debe incluirse la dinámica de alta frecuencia asociada a la flexibilidad de las masas no suspendidas, sino que también deben adoptarse las hipótesis más avanzadas de los modelos de baja frecuencia, fundamentalmente en lo que respecta a la geometría del contacto y a la dinámica del vehículo completo. El presente trabajo pretende ser una contribución para resolver los problemas anteriormente indicados a través del modelado de la interacción dinámica vehículo-vía en curva. Para ello, el modelo contempla tanto la dinámica de alta frecuencia asociada a la flexibilidad de los ejes montados y la vía como la componente de baja frecuencia referente a las masas suspendidas, considerando que el vehículo circula por vía recta, transición y curva. Se llevan a cabo simulaciones con el modelo de interacción vehículo-vía propuesto para diferentes condiciones de circulación en curva y diferentes casos propuestos en el Benchmark de Manchester. Finalmente, los resultados se presentan, discuten y comparan con programas comerciales basados en dinámica de sistemas multicuerpo., Los autores desean agradecer el apoyo recibido del Ministerio de Economía y Competitividad y del Fondo Europeo de Desarrollo Regional mediante el proyecto TRA2013-45596-C2-1-R, así como a la Generalitat Valenciana mediante los proyectos Prometeo/2016/007 y GV/2016/011 de la Conselleria d'Educació, Investigació, Cultura i Esport.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Cálculo 3D de la potencia acústica radiada por una rueda ferroviaria a partir de la respuesta temporal con efectos giroscópicos y comportamiento no lineal

  • García-Andrés, Francesc Xavier
  • F. D. Denia|||0000-0003-4536-8610
  • Martínez Casas, José|||0000-0001-5706-4951
  • Baeza González, Luis Miguel|||0000-0002-3815-8706
[ES] El objetivo de este trabajo es el desarrollo de un modelo de radiación acústica para una rueda de tren a partir de su respuesta temporal, calculada con un modelo dinámico que considera la rotación y sus efectos giroscópicos, la dinámica de alta frecuencia asociada a la flexibilidad de los sólidos y las no linealidades del contacto rueda-carril. Además, se realiza una comparación con los resultados proporcionados por el programa comercial TWINS. La implementación acústica se ha realizado sobre un modelo 3D de elementos finitos (EF) de una rueda ferroviaria excitada por una rugosidad pseudoaleatoria en la superficie del carril, cuyo espectro máximo viene determinado por la norma ISO 3095. A diferencia de los métodos lineales de cálculo de la radiación acústica, basados en funciones de respuesta en frecuencia, el modelo utilizado en este trabajo permite tener en cuenta las no linealidades presentes en el sistema. En la metodología propuesta, inicialmente se divide la superficie de la rueda estudiada en diversos elementos de superficie y se calcula la velocidad normal de cada uno de ellos para cada modo de vibración. En segundo lugar se calculan las eficiencias acústicas correspondientes a cada modo de vibración a partir de una formulación semianalítica [1]. Para ello se requiere conocer el número de diámetros nodales por modo. Con vistas a reducir el coste computacional, el problema de autovalores se resuelve a partir de una sección transversal de la rueda estudiada con un planteamiento 2D de EF capaz de tener en cuenta las propiedades de axisimetría [2]. Seguidamente se determina el contenido en frecuencia del campo temporal de velocidades para calcular a continuación la potencia acústica radiada mediante la integración de las velocidades normales para toda el área de la rueda, teniendo en cuenta la eficiencia acústica correspondiente a cada modo. Finalmente, los resultados obtenidos con el modelo propuesto se comparan con otras metodologías de tipo lineal, tales como la implementada en TWINS [3]. REFERENCIAS [1] D.J. Thompson and C.J.C. Jones, Sound radiation from a vibrating railway wheel , Journal of Sound and Vibration, 253, 401-419 (2002). [2] M. Petyt, Introduction to finite element vibration analysis, second edition, Cambridge University Press, (2010). [3] D.J. Thompson, Railway noise and vibration, Elsevier Ltd, (2009)., Los autores desean agradecer el apoyo recibido del Ministerio de Economía y Competitividad y del Fondo Europeo de Desarrollo Regional (proyecto TRA2013-45596-C2-1-R), así como de la Generalitat Valenciana (proyecto Prometeo/2016/007 y GV/2016/2011 de la Conselleria d¿Educacio, Investigació, Cultura i Esport)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Study of the Falling Friction Effect on Rolling Contact Parameters

  • Giner Navarro, Juan|||0000-0002-0513-3625
  • Baeza González, Luis Miguel|||0000-0002-3815-8706
  • Vila Tortosa, María Paloma|||0000-0003-3399-231X
  • Alonso Pazos, Asier
[EN] The existence of a wheel rail friction coefficient that depends on the slip velocity has been associated in the literature with important railway problems like the curving squeal and certain corrugation problems in rails. Rolling contact models that take into account this effect were carried out through the so-called Exact Theories adopting an exact elastic model of the solids in contact, and Simplified Theories which assume simplified elastic models such as Winkler. The former ones, based on Kalker s Variational Theory, give rise to numerical problems; the latter ones need to adopt hypotheses that significantly deviate from actual conditions, leading to unrealistic solutions of the contact problem. In this paper, a methodology based on Kalker s Variational Theory is presented, in which a local slip velocity-dependent friction law is considered. A formulation to get steady-state conditions of rolling contact by means of regularisation of the Coulomb s law is proposed. The model allows establishing relationships in order to estimate the global properties (creepage velocities vs. total longitudinal forces) through local properties (local slip velocity vs. coefficient of friction) or vice versa. The proposed model shows a good agreement with experimental tests while solving the numerical problems previously mentioned., The authors acknowledge the financial contribution of the Spanish Ministry of Economy and Competitiveness through the Project TRA2013-45596-C2-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Finite element based acoustic analysis of dissipative silencers with high temperature and thermal-induced heterogeneity

  • F. D. Denia|||0000-0003-4536-8610
  • Sánchez-Orgaz, Eva María|||0000-0002-8864-3056
  • Martínez Casas, José|||0000-0001-5706-4951
  • Kirby, Ray
A mixed finite element model has been derived for the acoustic analysis of perforated dissipative silencers including several effects simultaneously: (1) High temperature and thermal gradients in the central duct and the outer absorbent material; (2) A perforated passage carrying non-uniform axial mean flow. For such a combination, the properties of sound propagation media and flow are inhomogeneous and vary with position. The material of the outer chamber can be modelled by its complex equivalent acoustic properties, which completely determine the propagation of sound waves in the air contained in the absorbent medium. Temperature gradients introduce variations in these properties that can be evaluated through a heterogeneous temperature-dependent resistivity in combination with material models obtained at room temperature. A pressure-based wave equation for stationary medium is then used with the equivalent density and speed of sound of the absorbent material varying as functions of the spatial coordinates. Regarding the central air passage, a wave equation in terms of acoustic velocity potential can be used to model the non-uniform moving medium since the presence of temperature variations introduce not only heterogeneous acoustic properties of the air but also a gradient in the mean flow velocity. The acoustic connection between the central passage and the outer chamber is given by the acoustic impedance of the perforated duct. This impedance depends on the heterogeneous properties of the absorbent material and the non-uniform mean flow, leading to a spatial variation of the acoustic coupling and also to additional convective terms in the governing equations. The results presented show the influence of temperature, thermal gradients and mean flow on the transmission loss of automotive silencers. It has been found that high temperature and thermal-induced heterogeneity can have a significant influence on the acoustic attenuation of an automotive silencer and so should be included in theoretical models. In some particular configurations it may be relatively accurate to approximate the temperature field by using a uniform profile with an average value, specially for low resistivity materials. It has been shown, however, that this is not always possible and attenuation overestimation is likely to be predicted, mainly for high radial thermal gradients and high material flow resistivities, if the temperature distribution is not taken into account., Authors gratefully acknowledge the financial support of Ministerio de Economia y Competitividad and the European Regional Development Fund (projects DPI2010-15412 and TRA2013-45596-C2-1-R), Generalitat Valenciana (project Prometeo/2012/023) and Universitat Politecnica de Valencia (PAID-05-12, project SP20120452).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

3D acoustic modelling of dissipative silencers with nonhomogeneous properties and mean flow

  • Sánchez-Orgaz, Eva María|||0000-0002-8864-3056
  • Denia, Francisco David
  • Martínez-Casas, José
  • Baeza, Luis
A finite element approach is proposed for the acoustic analysis of automotive silencers including a perforated duct with uniform axial mean flow and an outer chamber with heterogeneous absorbent material. This material can be characterized by means of its equivalent acoustic properties, considered coordinate-dependent via the introduction of a heterogeneous bulk density, and the corresponding material airflow resistivity variations. An approach has been implemented to solve the pressure wave equation for a nonmoving heterogeneous medium, associated with the problem of sound propagation in the outer chamber. On the other hand, the governing equation in the central duct has been solved in terms of the acoustic velocity potential considering the presence of a moving medium. The coupling between both regions and the corresponding acoustic fields has been carried out by means of a perforated duct and its acoustic impedance, adapted here to include absorbent material heterogeneities and mean flow effects simultaneously. It has been found that bulk density heterogeneities have a considerable influence on the silencer transmission loss., This work was supported by Ministerio de Economia y Competitividad (Projects DPI2010-15412 and TRA2013-45596-C2-1-R), Conselleria d'Educacio, Cultura i Esport (Project Prometeo/2012/023), and Programa de Apoyo a la Investigacion y Desarrollo (PAID-05-12 and Project SP20120452) of Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Point collocation scheme in silencers with temperature gradient and mean flow

  • F. D. Denia|||0000-0003-4536-8610
  • Sánchez-Orgaz, Eva María|||0000-0002-8864-3056
  • Baeza González, Luis Miguel|||0000-0002-3815-8706
  • Kirby, R
This work presents a mathematical approach based on the point collocation technique to compute the transmission loss of perforated dissipative silencers with transversal temperature gradients and mean flow. Three-dimensional wave propagation is considered in silencer geometries with arbitrary, but axially uniform, cross section. To reduce the computational requirements of a full multidimensional finite element calculation, a method is developed combining axial and transversal solutions of the wave equation. First, the finite element method is employed in a two-dimensional problem to extract the eigenvalues and associated eigenvectors for the silencer cross section. Mean flow as well as transversal temperature gradients and the corresponding thermal-induced material heterogeneities are included in the model. In addition, an axially uniform temperature field is taken into account, its value being the inlet/outlet average. A point collocation technique is then used to match the acoustic fields (pressure and axial acoustic velocity) at the geometric discontinuities between the silencer chamber and the inlet and outlet pipes. Transmission loss predictions are compared favorably with a general three-dimensional finite element approach, offering a reduction in the computational effort., The authors gratefully acknowledge the financial support of Ministerio de Economia y Competitividad and the European Regional Development Fund (project TRA2013-45596-C2-1-R), as well as Generalitat Valenciana (project Prometeo/2012/023).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Computational performance of analytical methods for the acoustic modelling of automotive exhaust devices incorporating monoliths

  • F. D. Denia|||0000-0003-4536-8610
  • Martínez Casas, José|||0000-0001-5706-4951
  • Carballeira, Javier|||0000-0002-4179-8499
  • Nadal, Enrique|||0000-0002-2808-298X
  • Fuenmayor Fernández, Francisco-Javier|||0000-0003-3594-9593
[EN] The acoustic modelling of automotive exhaust devices, such as catalytic converters (CC) and diesel particulate filters (DPF), usually requires the use of multidimensional analytical and numerical techniques. The presence of higher order modes and three-dimensional waves in the expansion and contraction subdomains, as well as sound propagation within the monolith capillary ducts, can be considered through the finite element method (FEM), although this approach is traditionally thought to be very time consuming. With a view to overcome this limitation and to reduce the computational effort of the FEM, alternative modelling techniques are presented in the current work to speed up transmission loss calculations in exhaust devices incorporating monoliths. These approaches are based on the point collocation technique and the mode matching method. As shown in earlier studies, the sound attenuation of an exhaust device incorporating a monolith can be properly predicted if the latter is replaced by a plane wave four-pole transfer matrix providing a relationship between the acoustic fields at both sides of the monolithic region. Therefore, this work combines the presence of multidimensional higher order modes in the expansion and contraction regions with one-dimensional wave propagation within the capillary ducts of the central monolith. The point collocation technique and the mode matching method are applied to the compatibility conditions of the acoustic fields at all the subdomain interfaces to couple the solutions of the wave equation in the corresponding exhaust device subcomponents. For the particular case of rigid circular ducts, Bessel functions are considered as transversal pressure modes. The computational efficiency and accuracy of the results associated with the two analytical modelling techniques presented here are assessed, including the effect of the number of modes and collocation points, as well as their location. All the analytical approaches proposed in this work provide accurate predictions of the device attenuation performance and outperform the computational expenditure of a FE computation. Some differences are found, however, among the various analytical schemes in terms of computational speed and solution accuracy. From the results presented here, the mode matching method is the most efficient technique for the particular configurations under study, mainly due to the possibility of exploiting the orthogonality properties of the transverse pressure modes., This work has been supported by Ministerio de Economia y Competitividad and the European Regional Development Fund (project TRA2013-45596-C2-1-R), as well as Generalitat Valenciana (projects Prometeo/2016/007 and GV/2016/011 of Conselleria d'Educacio, Investigacio, Cultura i Esport).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Development of innovative methodologies to reduce railway rolling noise through Genetic Algorithm-based shape optimization techniques

  • Garcia Andrés, Xavier
[ES] El ruido de rodadura es un fenómeno producido debido a la interacción entre la rueda y el carril e inducido por las pequeñas irregularidades existentes en la superficie de ambos. Dichas irregularidades, conocidas como "rugosidad", provocan que se genere una vibración tanto en la rueda como el carril cuando el tren circula a una cierta velocidad, lo que consecuentemente lleva a la aparición de radiación acústica. Esto conforma una de las fuentes de molestias más relevantes y principal origen de la contaminación acústica producida por los trenes al circular por regiones urbanas densamente pobladas. Así, el objetivo de esta Tesis es el desarrollo de una metodología integral para la obtención de diseños de rueda viables mediante el uso de Algoritmos Genéticos (AG) con la finalidad de minimizar el ruido de rodadura asociado. Al desarrollar los mencionados algoritmos de optimización, el Método de Elementos Finitos (MEF) se combina con la parametrización geométrica de las diferentes tipologías de diseño de rueda analizadas, descritas en función de aquellos parámetros más relevantes para la presente investigación. Se hace uso de modelos linealizados en el dominio de la frecuencia, capaces de resolver la dinámica completa del sistema a partir de las correspondientes mallas de la sección transversal. La obtención de la potencia acústica radiada se lleva a cabo mediante el empleo de una formulación semi-analítica para el cálculo de la eficiencia acústica de la rueda y al uso de un Modelo de Fuentes Equivalentes (MFE) en el carril. El desarrollo teórico, además, es validado con el software comercial de referencia en el campo de investigación, TWINS, en el cual se basa. A lo largo de los procedimientos de optimización, se realiza un análisis de fatiga en cada diseño de rueda considerado con el fin de asegurar su viabilidad estructural, lo que actúa como una restricción de "pena de muerte" en el algoritmo. Además, se desarrolla un procedimiento de identificación modal que permite caracterizar los modos de vibración y clasificarlos según su número de diámetros y circunferencias nodales. Seguidamente, se exploran dos formulaciones diferentes de la función objetivo: una centrada en reducir directamente el ruido radiado, llamada LA;W -min; i otra centrada en disminuir el ruido de rodadura maximizando la media de las frecuencias naturales de los modos de vibración, conocida como NF-max. En la metodología LA;W -min, se minimiza la suma en energía del nivel de potencia acústica expresado en dB(A). Para el caso de NF-max, se desplazan las frecuencias naturales a regiones de frecuencia donde la amplitud de rugosidad es menor. Se consideran diversas aproximaciones: la inclusión de esquemas de perforación y la modificación de la forma de su sección transversal. Además, también se ha estudiado la influencia en el ruido de la variación de las propiedades geométricas del carril y viscoelásticas de la vía. Como resultado de esta Tesis se han conseguido diversos modelos más silenciosos de rueda ferroviaria, con reducciones en el ruido de rodadura de hasta 5 dB(A). Cuando se considera el sistema ferroviario completo,se siguen consiguiendo mejoras en la potencia acústica radiada con los diseños de rueda resultantes. Además, se analizan las correlaciones entre la maximización de las frecuencias naturales y la atenuación del nivel de potencia acústica, estableciendo NF-max como una metodología adecuada para los casos en que se priorice la eficiencia computacional. La sensibilidad del problema a los espacios de diseño seleccionados y la adecuación del uso de AG se estudian también con la obtención de Superficies de Respuesta. Adicionalmente, se han establecido relaciones entre la variación de los parámetros geométricos y la disminución en la radiación acústica asociada, así como se ha propuesto la reubicación de los modos de vibración a lo largo del espectro en frecuencia com, [CA] El soroll de rodament és un fenomen causat per la interacció entre la roda i el carril i induït per les xicotetes irregularitats presents a les seues superfícies. Aquestes irregularitats, conegudes amb el nom de "rugositat", provoquen que es genere una vibració tant a la roda com al carril en circular el tren a una certa velocitat, el que conseqüentment du a l'aparició de radiació acústica. Açò conforma una de les fonts de molèsties més rellevants i el principal origen de la contaminació acústica generada pels trens al seu pas per regions urbanes densament poblades. Així, l'objectiu d'aquesta Tesi és el desenvolupament d'una metodologia integral per a l'obtenció de dissenys de roda viables mitjançant l'ús d'Algoritmes Genètics (AG) amb la inalitat de minimitzar el soroll de rodament associat. Al desenvolupar els esmentats algoritmes d'optimització, el Mètode d'Elements Finits (MEF) es combina amb la parametrització geomètrica de les diferents tipologies de disseny de roda analitzades, descrites en funció d'aquells paràmetres més rellevants per a aquesta investigació. Es fa ús de models linealitzats en el domini de la freqüència, capaços de resoldre la dinàmica completa del sistema a partir les corresponents malles de secció transversal. La obtenció de la potència acústica radiada es du a terme mitjançant la utilització d'una formulació semi-analítica per al càlcul de l'eficiència acústica de la roda i l'ús d'un Model de Fonts Equivalents (MFE) amb el carril. El desenvolupament teòric s'ha validat amb el software comercial de referència al camp d'investigació, TWINS, en el qual es basa. Al llarg dels procediments d'optimització, es realitza una anàlisi de fatiga a cada disseny de roda considerat amb la finalitat d'assegurar la seua viabilitat estructural. S'ha desenvolupat un procediment d'identificació modal que permet caracteritzar els modes de vibració i classificar-los d'acord al seu número de diàmetres i circumferències nodals. També, s'exploren dos formulacions diferents de la funció objectiu: una centrada en reduir directament el soroll radiat, anomenada LA;W -min; i altra centrada en disminuir el soroll de rodament maximitzant la mitja de les freqüències naturals dels modes de vibració, coneguda com NF-max. D'aquesta manera, en la metodologia LA;W -min, es minimitza la suma en energia del nivell de potència acústica expressat en dB(A). Per al cas de NF-max, es desplacen les freqüències naturals a regions de freqüència on l'amplitud de rugositat és menor. Es consideren diverses aproximacions: la inclusió d'esquemes de perforació i la modificació de la forma de la seua secció transversal, establint el radi com un valor fixe en un cas i utilitzant-lo com un paràmetre d'optimització més en l'altre. A més a més, s'ha estudiat la influència en el soroll de la variació de les propietats geomètriques del carril i viscoelàstiques de la via. Com a resultat d'aquesta Tesi s'han aconseguit diversos models de roda ferroviària més silenciosos, amb reduccions en el soroll de rodament de fins a 5 dB(A). Quan es considera el sistema ferroviari complet amb tots els seus components, es segueixen aconseguint millores en la potencia acústica radiada amb els dissenys de roda resultants. A més a més, 'analitzen les correlacions entre la maximització de les freqüències naturals i l'atenuació del nivell de potencia acústica, establint NF-max com una metodologia adequada pels casos en que es prioritza l'eficiència computacional. La sensibilitat del problema als espais de disseny escollits i l'adequació de l'ús de AG s'estudia també mitjançant l'obtenció de Superfícies de Resposta (SRs) per als paràmetres geomètrics utilitzats. Addicionalment, s'han establert relacions entre la variació dels paràmetres geomètrics i la disminució en la radiació acústica associada, així com s'ha proposat la reubicació dels modes de vibració al voltant de, [EN] Rolling noise phenomenon is produced due to the wheel/track interaction and induced by the small unevenness present in their surfaces. Such unevenness, known as "roughness", causes that vibrations arise in both the wheel and track when the train passes by with a certain speed, that consequently leads to the appearance of acoustic radiation. This kind of noise is one of the most relevant sources of annoyance and the principal focus of the railway acoustic pollution produced by trains operating through highly populated urban regions. Thus, the main goal of the present Thesis is the development of a comprehensive methodology to achieve suitable railway wheel designs through the use of Genetic Algorithms (GAs) with the aim of minimizing the associated rolling noise. When developing the aforementioned optimization algorithms, the Finite Element Method (FEM) is combined with the geometric parametrization of the different wheel design typologies analysed, described as a function of those parameters most relevant for the current research. In order to describe the dynamic behaviour of each component involved in the wheel/track interaction, use is made of linearised models in the frequency domain capable of solving the whole coupled dynamic response from the corresponding cross-section meshes. Subsequent derivation of the radiated sound power from the dynamic information is carried out by applying a semi-analytical formulation that allows for the wheel acoustic efficiency computation, on one hand, and by making use of an Equivalent Sources Model (ESM) in the track, on the other hand. Besides, such theoretical development is validated with the reference commercial software in the field, TWINS, on which it is based. Throughout the optimization procedures, a fatigue analysis is performed on every wheel design considered to assure structural feasibility, that acts as a "death penalty" constraint in the algorithm. Furthermore, a modal identification procedure is developed, which allows to characterize modeshapes and to classify them according to their number of nodal diameters and circumferences. Then, two different formulations of the objective function are explored: one focused on directly reducing radiated noise, named LA;W-min; and another centred on decreasing rolling noise by maximizing the average natural frequency of the modeshapes, called NF-max. Hence, in the LA;W -min methodology, the sum in energy of the wheel Sound poWer Level (SWL) expressed in dB(A) is minimized. For the NF-max case, natural frequencies are shifted to frequency regions where the roughness amplitude content is lower. Different approaches are considered: the inclusion of perforation schemes in the wheel and the variation of its cross-sectional shape, setting the radius as a constant value in one case and using it as an optimization parameter in another. Moreover, the influence on the noise of changing the rail geometric and track viscoelastic properties is also studied. As a result of the present Thesis, several quieter models of railway wheels have been achieved, with rolling noise reductions of up to 5 dB(A). When the whole railway system with all the components is considered, improvements in the radiated sound power remain achieved with the resulting wheel designs. Besides, correlations between maximization of natural frequencies and SWL mitigation are analysed, establishing the NF-max as a suitable methodology for cases when computational efficiency is prioritized. The sensitivity of the problem to selected design domains and the suitability of the use of GAs are also studied with the obtention of Response Surfaces (RSs) for the geometric parameters used. Additionally, correlations are established between the variation of the geometric parameters and the decrease in the associated acoustic radiation, while the shifting of the modeshapes along the frequency domain is proposed as a physical mechanism responsible of the observed sound power decrease., This thesis has been supported by the Agencia Estatal de Investigación and the European Regional Development Fund (projects TRA2013-45596-C2-1-R and TRA2017-84701-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A comprehensive model of the railway wheelset-track interaction in curves

  • Martínez Casas, José|||0000-0001-5706-4951
  • Baeza González, Luis Miguel|||0000-0002-3815-8706
  • Di Gialleonardo, Egidio
  • Bruni, Stefano
Train-track interaction has been extensively studied in the last 40 years at least, leading to modelling approaches that can deal satisfactorily with many dynamic problems arising at the wheel/rail interface. However, the available models are usually not considering specifically the running dynamics of the vehicle in a curve, whereas a number of train-track interaction phenomena are specific to curve negotiation. The aim of this paper is to define a model for a flexible wheelset running on a flexible curved track. The main novelty of this work is to combine a trajectory coordinate set with Eulerian modal coordinates; the former permits to consider curved tracks, and the latter models the small relative displacements between the trajectory frame and the solid. In order to reduce the computational complexity of the problem, one single flexible wheelset is considered instead of one complete bogie, and suitable forces are prescribed at the primary suspension seats so that the mean values of the creepages and contact forces are consistent with the low frequency curving dynamics of the complete vehicle. The wheelset model is coupled to a cyclic track model having constant curvature by means of a wheel/rail contact model which accounts for the actual geometry of the contacting profiles and for the non-linear relationship between creepages and creep forces. The proposed model can be used to analyse a variety of dynamic problems for railway vehicles, including rail corrugation and wheel polygonalisation, squeal noise, numerical estimation of the wheelset service loads. In this paper, simulation results are presented for some selected running conditions to exemplify the application of the model to the study of realistic train-track interaction cases and to point out the importance of curve negotiation effects specifically addressed in the work., The authors acknowledge the financial contribution of the Spanish Ministry of Economy and Competitiveness through the project TRA2013-45596-C2-1-R.