Pasar al contenido principal

ESTRATEGIAS DE CONTROL BASADAS EN LA INFORMACION CONTEXTUAL DEL VEHICULO PARA LA REDUCCION DEL CONSUMO DE COMBUSTIBLE Y LAS EMISIONES EN CONDICIONES REALES DE CONDUCCION

TRA2016-78717-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Adaptive calibration of Diesel engine injection for minimising fuel consumption with constrained NOx emissions in actual driving missions

  • Luján, José M.|||0000-0001-6133-8943
  • Pla Moreno, Benjamín|||0000-0001-9238-2939
  • Bares-Moreno, Pau|||0000-0001-9672-0819
  • Pandey, Varun
[EN] This article proposes a method for fuel minimisation of a Diesel engine with constrained NOx emission in actual driving mission. Specifically, the methodology involves three developments: The first is a driving cycle prediction tool which is based on the space-variant transition probability matrix obtained from an actual vehicle speed dataset. Then, a vehicle and an engine model is developed to predict the engine performance depending on the calibration for the estimated driving cycle. Finally, a controller is proposed which adapts the start-of-injection calibration map to fulfil the NOx emission constraint while minimising the fuel consumption. The calibration is adapted during a predefined time window based on the predicted engine performance on the estimated cycle and the difference between the actual and the constraint on engine NOx emissions. The method assessment was done experimentally in the engine test set-up. The engine performace using the method is compared with the state-of-the-art static calibration method for different NOx emission limits on real driving cycles. The online implementation of the method shows that the fuel consumption can be reduced by 3%-4% while staying within the emission limits, indicating that the estimation method is able to capture the main driving cycle characterstics., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: The authors acknowledge the support of Spanish Ministrrio de Economia, Industria y Competitivad through project TRA2016-78717-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Impact of driving dynamics in RDE test on NOx emissions dispersion

  • Luján, José M.|||0000-0001-6133-8943
  • Guardiola, Carlos|||0000-0002-3150-8566
  • Pla Moreno, Benjamín|||0000-0001-9238-2939
  • Pandey, Varun
[EN] EU6D emission regulation intends to bridge the gap between laboratory tests and the real driving conditions by introducing real drive emission testing. It requires the measurement of real drive emission to be an additional type approval test in order to take into account the influence of road profile, ambient conditions and traffic situations. An important amendment has been included in Commission regulation (European Union) 2016/646, limiting the driving dynamics and hence avoiding the biased testing of the vehicle. In this work, a drive cycle generator has been developed to synthesise cycles meeting all the regulatory requirements of the real drive emission testing. The generator is based on the transition probability matrix obtained from each phase of the World harmonised Light vehicle Test Procedure cycle. Driving dynamics have been varied based on real drive emission regulations, and several trips have been generated with dynamics ranging from soft to aggressive. A direct injection compression ignition 1.5 L engine with a state-of-the-art aftertreatment system has been utilised to run the generated synthetic cycles. The analysis of the results obtained in the tests (all of them complying with real drive emission restrictions in terms of driving dynamics) points out a noticeable 60% relative dispersion in the NO(x)emissions downstream of the catalyst. The contribution of the proposed method lies not only in the fact that it synthesises driving cycles as stochastic process and is capable of tuning the driving dynamics based on real drive emission regulations, but it also presents the range of dispersion possible in NO (x)emissions solely due to the driving dynamics. The methodology followed in the present work could be an essential step in future engine developments, where testing engine prototypes on the entire range of driving dynamics in the engine test bench facility could provide interesting insights about the expected NO(x)emissions in real drive emission testing., The authors acknowledge the support of Spanish Ministrrio de Economia, Industria y Competitivad through project TRA2016-78717-R
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cylinder charge composition observation based on in-cylinder pressure measurement

  • Guardiola, Carlos|||0000-0002-3150-8566
  • Pla Moreno, Benjamín|||0000-0001-9238-2939
  • Bares-Moreno, Pau|||0000-0001-9672-0819
  • Stefanopoulou, Anna
[EN] Accurate cylinder charge and composition estimation is crucial for proper combustion control, however, current sensors and models show different issues for transient estimation. The work presented in this paper combines a novel technique for trapped mass estimation, which relies on the in-cylinder pressure resonance, with on-board engine sensors by taking into account the intake manifold dynamics with a closed-loop observer. The resonance method provides a measurement of trapped mass with one cycle resolution. This measurement feeds a Kalman filter to improve the transient and steady response of the intake charge and composition estimation. The observer was validated in a four stroke heavy-duty engine, showing fast transient capabilities and an adequate steady-state accuracy., This work was partially supported by Ministerio de Economia y Competitividad through Project TRA2016-78717-R. C. Guardiola research has been partially financed by the Fulbright Commission and the Spanish Ministerio de Educacion, Cultura y Deporte through grant PRX14/00274.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Short-circuit effects on spark ignition engine after-treatment and fuel-to-air ratio control

  • Guardiola, Carlos|||0000-0002-3150-8566
  • Pla Moreno, Benjamín|||0000-0001-9238-2939
  • Real-Minuesa, Marcelo
  • Travaillard, Cyril
  • Dambricourt, Frederic
[EN] The short circuit of fresh air is a more and more extended strategy to deal with low-end torque issues, very common in small turbocharged and spark-ignited four-stroke engines. Therefore, from the author¿s point of view, it is interesting to check whether the after-treatment system can work properly under these conditions. In the present study, the effect of the fresh air short-circuit on engine emissions has been assessed through its impact on the wideband l sensor and the three-way catalyst behaviour, which are the key elements of the fuel-to-air ratio control strategy. In particular, the analysis of the sensor dynamic response shows that the l sensor overestimates the fuel-to-air ratio under short-circuit conditions. The sensor overestimation leads the actual fuel-to-air ratio out of the proper three-way catalyst window; in this sense, results show a non-negligible emissions increase, especially in terms of NOx. Regarding the impact on the threeway catalyst behaviour, the study shows how short-circuit pulses change the exhaust gas composition for a given fuel-toair ratio at catalyst inlet, which also contributes to a penalty in the three-way catalyst efficiency, The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: The authors acknowledge the support of Spanish Ministerio de Economı´a, Industria y Competitividad through project TRA2016-78717-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modeling combustion timing in an RCCI engine bymeans of a control oriented model

  • Kakoee, A.
  • Bakhshan, Y.
  • Barbier, Alvin Richard Sebastien|||0000-0002-3563-8624
  • Bares-Moreno, Pau|||0000-0001-9672-0819
  • Guardiola, Carlos|||0000-0002-3150-8566
[EN] Reactivity controlled compression ignition (RCCI) engines as one of low temperature auto ignition combustion strategies have shown a good performance to reduce NO (x) and soot emission while increasing engine thermal efficiency. Combustion control of these types of engines is relatively complex because of their ignition type which makes it difficult to have a direct control on the start of the combustion. In this research, combustion phase of an RCCI engine was modeled with using a control-oriented method. The combustion properties such as start of the combustion, crank angle degree where 50 percent of the fuel is burnt(CA50) and the burn duration were modeled in this research. A modified knock integral model was used for start of combustion estimation. Using the effect of spontaneous front speed, burn duration was modeled where a mathematical model is developed; and Wiebe function is used to model CA50. Indicated mean effective pressure(IMEP) also estimated in this modeling. To validate the developed models, five experimental data sets from a heavy-duty RCCI engine were used. The results show the maximum mean errors of 1.7, 1.9 and 2.3 crank angle degree (CAD) for start of combustion, burn duration(BD) and the CA50, respectively and this quantity is 0.5 bar for IMEP in steady state condition. The transient condition of the engine operation was also investigated. The results and trends are promising in all characteristics of the combustion process especially in the modeling of the indicated mean effective pressure where the majority of the data have errors less than 1.5 bar., The authors acknowledge the support of Spanish Ministerio de Economia, Industria y Competitivad through project TRA2016-78717-R (AEI/FEDER, EU). Alvin Barbier participation was funded through grant ACIF/2018/141, Programa Operativo del Fondo Social Europeo (FSE) de la Comunitat Valenciana 2014-2020. Alireza Kakoee participation was funded through grants 43/3/298624 from Iran ministry of science, research and technology.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Model-Based Ammonia Slip Observation for SCR Control and Diagnosis

  • Guardiola, Carlos|||0000-0002-3150-8566
  • Pla Moreno, Benjamín|||0000-0001-9238-2939
  • Bares-Moreno, Pau|||0000-0001-9672-0819
  • Mora, Javier
[EN] The control of selective catalytic reduction (SCR) systems, via NH3 injection, requires from a precise estimation of the SCR load in order to ensure NOx reduction by minimizing ammonia slip. This article aims to resolve the cross-sensitivity of current NOx sensors at the outlet of the SCR, by providing the control unit with an estimation of NOx and ammonia slip. The problem of discerning between NOx and ammonia slip is solved by identifying an intermediate variable representing the SCR load. The SCR load is estimated by combining the mass conservation principle between the inlet and the outlet of the SCR and a NOx reduction model, via an extended Kalman filter. Current models and observers have several limitations to represent the real behavior of the SCR along all the operating conditions; on one hand, when relying on the mass conservation, small errors at models are integrated, leading to important bias on the SCR load and on the other hand, the dynamics at the SCRmust be preciselymodelled for an adequate adaptation of the model. The main focus of the developed algorithm is to use a simplified model which might be used for ammonia slip estimation, being aware of current limitations of SCR models in real operation. Experimental results in a EURO 6 compression ignited (CI) engine show the potential of such observation in transient conditions and an adequate correlation with external ammonia measurements provided by additional sensors available on the test bench., This work was supported by the Spanish Ministerio de Economia, Industria y Competitividad under project TRA2016-78717-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Closed-loop control of a dual-fuel engine working with different combustion modes using in-cylinder pressure feedback

  • Guardiola, Carlos|||0000-0002-3150-8566
  • Pla Moreno, Benjamín|||0000-0001-9238-2939
  • Bares-Moreno, Pau|||0000-0001-9672-0819
  • Barbier, Alvin Richard Sebastien|||0000-0002-3563-8624
[EN] This work presents a closed-loop combustion control concept using in-cylinder pressure as a feedback in a dual-fuel combustion engine. At low load, reactivity controlled compression ignition combustion was used while a diffusive dual-fuel combustion was performed at higher loads. The aim of the presented controller is to maintain the indicated mean effective pressure and the combustion phasing at a target value, and to keep the maximum pressure derivative under a limit to avoid engine damage in all the combustion modes by cyclically adapting the injection settings. Various tests were performed at steady-state conditions showing good abilities to fulfil the expected operating conditions but also to reject disturbances such as intake pressure or exhaust gas recirculation variations. Finally, the proposed control strategy was tested during a load transient resulting in a combustion switching-mode and the results exhibited the closed-loop potential for controlling such combustion concept., The author(s) disclosed receipt of the following finan-cial support for the research, authorship, and/or publi-cation of this article: The authors acknowledge the support of Spanish Ministerio de Economia, Industria y Competitividad through project TRA2016-78717-R. Alvin Barbier received a funding through the grant ACIF/2018/141 from the Generalitat Valenciana and the European Social Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimal control of a turbocharged direct injection diesel engine by direct method optimization

  • Luján, José M.|||0000-0001-6133-8943
  • Guardiola, Carlos|||0000-0002-3150-8566
  • Pla Moreno, Benjamín|||0000-0001-9238-2939
  • Reig, Alberto
[EN] This work studies the effect and performance of an optimal control strategy on engine fuel efficiency and pollutant emissions. An accurate mean value control-oriented engine model has been developed and experimental validation on a wide range of operating conditions was carried out. A direct optimization method based on Euler's collocation scheme is used in combination with the above model in order to address the optimal control of the engine. This optimization method provides the optimal trajectories of engine controls (fueling rate, exhaust gas recirculation valve position, variable turbine geometry position and start of injection) to reproduce a predefined route (speed trajectory including variable road grade), minimizing fuel consumption with limited NOx emissions and a low soot stamp. This optimization procedure is performed for a set of different NOx emission limits in order to analyze the trade-off between optimal fuel consumption and minimum emissions. Optimal control strategies are validated in an engine test bench and compared against engine factory calibration. Experimental results show that significant improvements in both fuel efficiency and emissions reduction can be achieved with optimal control strategy. Fuel savings at about 4% and less than half of the factory NOx emissions were measured in the actual engine, while soot generation was still low. Experimental results and optimal control trajectories are thoroughly analyzed, identifying the different strategies that allowed those performance improvements., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: This work was supported by Ministerio de Economia y Competitividad through project TRA2016-78717-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cycle-to-cycle combustion variability modelling in spark ignited engines for control purposes

  • Pla Moreno, Benjamín|||0000-0001-9238-2939
  • De La Morena, Joaquín|||0000-0003-0208-508X
  • Bares-Moreno, Pau|||0000-0001-9672-0819
  • Jimenez, Irina Ayelen
[EN] A control-oriented model of spark ignition combustion is presented. The model makes use of avaliable signals, such as spark advance, air mass, intake pressure, and lambda, to characterize not only the average combustion evolution but also the cycle-to-cycle variability. The conventional turbulent flame propagation model with two states, namely entrained mass and burnt mass, is improved by look-up tables at some parameters, and the cycle-to-cycle variability is estimated by propagation of an exogenous noise with a normal probabilistic distribution at the turbulent and laminar flame speed, which intends to simulate the unknowns at turbulent flow, temperature distribution, or initial kernel distribution. The model is able to estimate which is the expected variability during the combustion evolution and might be used online for characterizing the time response of closed-loop control actions or it can be used offline to improve the control strategies without large experimental test campaigns. Experimental data from a four-stroke commercial engine was used for calibration and validation purposes, demonstrating the capabilities of the model in steady and transient conditions., The authors appreciate the technical support and the clues given by J. Israel Sanchez for the model development and also acknowledge the support of Spanish Ministerio de Economia, Industria y Competitividad through project TRA2016-78717-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Variable smoothing of optimal diesel engine calibration for improved performance and drivability during transient operation

  • Pandey, Varun
  • van Dooren, Stijn
  • Ritzmann, Johannes
  • Onder, Christopher
  • Pla Moreno, Benjamín|||0000-0001-9238-2939
[EN] The model-based method to define the optimal calibration maps for important diesel engine parameters may involve three major steps. First, the engine speed and load domain - in which the engine is operated - are identified. Then, a global engine model is created, which can be used for offline simulations to estimate engine performance. Finally, optimal calibration maps are obtained by formulating and solving an optimisation problem, with the goal of minimising fuel consumption while meeting constraints on pollutant emissions. This last step in the calibration process usually involves smoothing of the maps in order to improve drivability. This article presents a method to trade off map smoothness, brake-specific fuel consumption and nitrogen oxide emissions. After calculating the optimal but potentially non-smooth calibration maps, a variation-based smoothing method is employed to obtain different levels of smoothness by adapting a single tuning parameter. The method was experimentally validated on a heavy-duty diesel engine, and the non-road transient cycle was used as a case study. The error between the reference and actual engine torque was used as a metric for drivability, and the error was found to decrease with increasing map smoothness. After having obtained this trade-off for various fixed levels of smoothness, a time-varying smoothness calibration was generated and tested. Experimental results showed that, with a time-varying smoothness strategy, nitrogen oxide emissions could be reduced by 4%, while achieving the same drivability and fuel consumption as in the case of a fixed smoothing strategy., The authors acknowledge the support of Spanish Ministerio de Economia, Industria y Competitividad through project TRA2016-78717-R, and this work was developed during the research stay of Varun Pandey at the ETH funded by the Programa de Movilidad para la Formacion de Personal Investigador del Vicerrectorado de Investigacion, Innovacion y Transferencia de la UPV.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fuel-to-air ratio control under short-circuit conditions through UEGO sensor signal analysis

  • Guardiola, Carlos|||0000-0002-3150-8566
  • Pla Moreno, Benjamín|||0000-0001-9238-2939
  • Real, Marcelo
  • TRAVAILLARD, Cyril
  • Dambricourt, Frederic
[EN] The impact of short-circuit pulses on the after-treatment system of a spark-ignited engine must be taken into account to keep the fuel-to-air equivalence ratio within the three-way catalyst window, thereby reducing pollutant emissions. The fuel-to-air equivalence ratio overestimation that suffers the wide-range ¿-sensor upstream three-way catalyst in the presence of short circuit is especially relevant. In this study, a novel approach to deal with the fuel-to-air equivalence ratio control under short-circuit conditions is introduced. Under this scope, this work proposes a strategy for the on-board correction of the aforementioned fuel-to-air equivalence ratio overestimation, by means of the information regarding short-circuit level that provides the frequency content of the ¿-sensor at the engine frequency. Finally, the potential of this approach to minimize pollutant emissions, in particular the NOx penalty arisen as a consequence of running the engine under leaner conditions than expected, is assessed through experimental tests., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: The authors acknowledge the support of Spanish Ministerio de Economia, Industria y Competitividad through project TRA2016-78717-R
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Control-oriented modelling of three-way catalytic converter for fuel-to-air ratio regulation in spark ignited engines

  • Guardiola, Carlos|||0000-0002-3150-8566
  • Climent, H.|||0000-0002-2407-5651
  • Pla Moreno, Benjamín|||0000-0001-9238-2939
  • Real, Marcelo
[EN] The purpose of this paper is to introduce a grey-box model of three-way catalytic converter, which is capable of estimating the oxygen storage level to aid the fuel-to-air ratio control in spark ignited engines. As it is well-known, the prime parameter that drives the transient dynamics in current three-way catalytic converter is their capability to store a certain amount of oxygen, then allowing to oxidize some pollutant species such as carbon monoxide or hydrocarbons even at rich conditions during short periods of time. Since oxygen storage level is considered a good indicator of the catalyst state but it cannot be directly measured, a model based real-time capable estimation like the one proposed in this paper could be valuable. The model accounts for oxygen storing as well as oxidation and reduction of the main species involved, taking as inputs fuel-to-air equivalence ratio, air mass flow, temperature and gas composition at three-way catalyst inlet. From these inputs, oxygen storage level and brick temperature are calculated as model states, which finally provide the gas composition downstream of the catalyst as output. In addition, a simplified model of narrowband lambda sensor is included, it provides a voltage from gas composition at the outlet of the catalyst and allows to assess the model behaviour by comparison with the on-board lambda sensor measurements. Finally, the validation of the model performance by means of experimental test as well as different practical cases, where the benefits of oxygen storage level estimation plays a key role, are introduced., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: The authors acknowledge the support of Spanish Ministerio de Economía, Industria y Competitividad through project TRA2016-78717-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

A combustion phasing control-oriented model applied to an RCCI engine

  • Guardiola, Carlos|||0000-0002-3150-8566
  • Pla Moreno, Benjamín|||0000-0001-9238-2939
  • Bares-Moreno, Pau|||0000-0001-9672-0819
  • Barbier, Alvin Richard Sebastien|||0000-0002-3563-8624
[EN] Low temperature combustions such as Reactivity Controlled Compression Ignition (RCCI) have been shown to be a promising way to reduce pollutants at the exhaust, i.e. NOx and soot emissions, and increase the thermal efficiency of future engines. However, such concepts are subject to substantial control sensitivity, e.g. combustion phasing, due to their lack of direct actuation for controlling the ignition of the mixture. This work investigates a control-oriented model based on physical equations aimed to predict the start of combustion and the crank angle of 50% fuel burnt (CA50). The model was developed for predicting the ignition using a modified knock integral model and a linear equation was used to estimate the burn duration between the start of combustion and the combustion phasing. The calibration and the validation of the model were performed using experimental data from a heavy-duty engine showing good results under transient operation., The authors acknowledge the support of Spanish Ministerio de Economia, Industria y Competitividad through project TRA2016-78717-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analytical Optimal Solution to the Energy Management Problem in Series Hybrid Electric Vehicles

  • Luján, José M.|||0000-0001-6133-8943
  • Guardiola, Carlos|||0000-0002-3150-8566
  • Pla Moreno, Benjamín|||0000-0001-9238-2939
  • Reig, Alberto
[EN] An optimal solution to the energy management problem in hybrid electric vehicles has been extensively addressed in the literature during the last decade, especially with the application of dynamic programming, the Pontryagin minimum principle, or equivalent consumption minimization strategy. However, most of the works consist in finding cycle-specific optimal trajectories, which are far from being general control strategies. The aim of this work is to derive an analytical expression, general and not cycle specific, for the energy management problem that summarizes the optimal controls for a series hybrid electric vehicle. Starting from a simple definition of the powertrain, an explicit formulation is deducted to minimize fuel consumption based on an analytic analysis of the Pontryagin minimum principle. Explicit expressions for control variables and costates are provided. The result is a general control strategy that specifies the optimal generator set usage for a given probability distribution of expected traction demands. This methodology is benchmarked with common methods in the literature (dynamic programming and numerical Pontryagin minimum principle) showing near identical results but with strongly reduced computational time. The general form of this control strategy can also be used to analyze the optimal operation range of the engine, which could be useful for designing purposes., This work was supported by the Ministerio de Economia y Competitividad through Project TRA2016-78717-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On the potential of traffic light information availability for reducing fuel consumption and NOx emissions of a diesel light-duty vehicle

  • Guardiola, Carlos|||0000-0002-3150-8566
  • Pla Moreno, Benjamín|||0000-0001-9238-2939
  • Pandey, Varun
  • Burke, Richard
[EN] The paper addresses the impact of traffic light information availability in terms of fuel consumption and emissions by means of comparing three different scenarios that a driver of a diesel light-duty vehicle may face when trying to cover a particular route of 1 km with two traffic lights in between. The first scenario is that the driver does not know in advance the state of the traffic lights. The second scenario assumes that the driver knows the state of the traffic lights but has no modelling nor computation capabilities to solve the associated optimal control problem. In the third scenario, the driver knows in advance the state of the traffic lights and is also able to solve the corresponding optimal control problem that leads to fuel consumption or NOx emission minimisation. In this study, the vehicle-speed trajectories associated with the previously described three scenarios have been computed and then tested in a Euro 5 Diesel vehicle installed in a chassis dynamometer. The obtained results show that traffic light information is essential for fuel minimisation in urban conditions, promoting reductions of 7.5-12% and 13-32% for fuel consumption and NOx emissions in the studied case. In addition, differences in the engine-operating conditions for high efficiency and low NOx emissions may lead to extremely high fuel consumption when NOx minimisation is foreseen or viceversa, The authors acknowledge the support of Spanish Ministerio de Economia, Industria y Competitividad through project TRA201678717-R and Programme GV-BEST ref. BEST/2018/002 for supporting the research stage of B.P. in the University of Bath
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimal heat release shaping in a reactivity controlled compression ignition (RCCI) engine

  • Guardiola, Carlos|||0000-0002-3150-8566
  • Pla Moreno, Benjamín|||0000-0001-9238-2939
  • García Martínez, Antonio|||0000-0001-5783-4936
  • Boronat-Colomer, Vicente
[EN] The present paper addresses the optimal heat release (HR) law in a single cylinder engine operated under reactivity controlled compression ignition (RCCI) combustion mode to minimise the indicated specific fuel consumption (ISFC) subject to different constraints including pressure related limits (maximum cylinder pressure and maximum cylinder pressure gradient). With this aim, a 0-dimensional (0D) engine combustion model has been identified with experimental data. Then, the optimal control problem of minimising the ISFC of the engine at different operating conditions of the engine operating map has been stated and analytically solved. To evaluate the method viability a data-driven model is developed to obtain the control actions (gasoline fraction) leading to the calculated optimal HR, more precisely to the optimal ratio between premixed and diffusive combustion. The experimental results obtained with such controls and the differences with the optimal HR are finally explained and discussed., This work was supported by Ministerio de Economía y Competitividad through Project TRA2016-78717-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental determination and modelling of the diesel oxidation catalysts ageing effects

  • Guardiola, Carlos|||0000-0002-3150-8566
  • Pla Moreno, Benjamín|||0000-0001-9238-2939
  • Mora Pérez, Javier
  • Lefebvre, Damien
[EN] After-treatment systems are necessary to respect the pollutant emissions thresholds specified by regulations. However, due to system ageing, the efficiency of the after-treatment system may decrease and affect the vehicle emissions during real driving conditions. To address this issue, the model presented in this article is based on the on-engine tests performed to a set of diesel oxidation catalysts with different ageing levels, through which the ageing process is characterized. Then, the model is able to simulate the light-off temperature and slip increase due to ageing, and it is applied to a Worldwide Harmonized Light Vehicles Test Cycle for a new and a thermally aged catalysts., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: This research has been partially financed by the Spanish Ministerio de Economía y Competitividad, through project TRA2016-78717-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An on-board method to estimate the light-off temperature of diesel oxidation catalysts

  • Guardiola, Carlos|||0000-0002-3150-8566
  • Pla Moreno, Benjamín|||0000-0001-9238-2939
  • Bares-Moreno, Pau|||0000-0001-9672-0819
  • Mora, Javier
[EN] Current diesel engine regulations include on-board diagnostic requirements so that after-treatment systems need on-board methods to detect their aging state through the available measurements. In a state-of-the-art diesel exhaust line, two temperature and lambda measurements can be found upstream and downstream of the diesel oxidation catalyst. Thus, the strategy presented in this article makes use of these measurements to estimate the light-off temperature, which has been widely studied as a characteristic of diesel oxidation catalyst aging. The light-off temperature estimation potential is evaluated first under dynamic engine operating conditions, in which lambda measurements are proved to be precise enough to detect oxidation. However, dynamic conditions make the association of a representative temperature with an oxidation event difficult. Therefore, the method makes use of more controlled conditions at idle, during which the exhaust temperature decreases avoiding dynamics of normal driving conditions. During the idle, post-injection pulses are applied to determine whether oxidation occurs at a representative temperature measured by the upstream temperature sensor. The result of each pulse is used to generate a database. Then, after a long enough time window, the database generated will allow characterizing non-oxidation and oxidation temperatures, with an intermediate interval of indefinition. This article shows how the temperatures of these ranges increase as the light-off temperature increases, thereby validating the proposed method for light-off temperature estimation., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: The authors acknowledge the support of Spanish Ministerio de Econom¿¿a, Industria y Competitividad through project TRA2016-78717-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improving CO2 emission assessment of diesel-based powertrains in dynamic driving cycles by data fusion techniques

  • Guardiola, Carlos|||0000-0002-3150-8566
  • Pla Moreno, Benjamín|||0000-0001-9238-2939
  • Bares-Moreno, Pau|||0000-0001-9672-0819
  • Chappell, Edward
  • Burke, Richard
[EN] This article proposes a method based on the Kalman filter to improve the accuracy of the CO(2)measurement in driving cycles such as worldwide harmonized light vehicles test cycles or real driving cycles which are inherently subject to a loss in accuracy due to the dynamic limitations of the CO(2)analysers. The information from the analyser is combined with the electronic control unit estimation of the fuel injection. The characteristics of diesel engines and, in particular, the high efficiency of the combustion process and the diesel oxidation catalyst allows to compute the CO(2)emissions from the fuel consumption estimation of the electronic control unit by applying the carbon balance method assuming negligible HC and CO emissions. Then, the assessment of the CO(2)analyser response time and accuracy allows to pose an estimation problem that can be solved by a Kalman filter. The application of the method to different driving cycles shows that analyser dynamic limitations may lead to an overestimation of the CO(2)figures that can reach 4% in highly dynamic tests such as the worldwide harmonized light vehicles test cycles. The technique thus has further potential application to replicating real driving cycles on the chassis dynamometer for real driving emission testing., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: The authors acknowledge the support of Spanish Ministerio de Economia, Industria y Competitividad through project TRA2016-78717-R and Programme GV-BEST ref. BEST/2018/002 for supporting the research stage of B. Pla in the University of Bath.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Application and benchmarking of a direct method to optimize the fuel consumption of a diesel electric locomotive

  • Macian Martinez, Vicente
  • Reig, Alberto
  • Guardiola, Carlos|||0000-0002-3150-8566
  • Pla Moreno, Benjamín|||0000-0001-9238-2939
[EN] This paper addresses the optimal control of a long-haul passenger train to deliver minimum-fuel operations. Contrary to the common Pontryagin minimum principle approach in railroad-related literature, this work addresses this optimal control problem with a direct method of optimization, the use of which is still marginal in this field. The implementation of a particular direct method based on the Euler collocation scheme and its transcription into a nonlinear problem are described in detail. In this paper, this optimization technique is benchmarked with well-known optimization methods in the literature, namely dynamic programming and the Pontryagin minimum principle, by simulating a real route. The results showed that the direct methods are on the same level of optimality compared with other algorithms while requiring reduced computational time and memory and being able to handle very complex dynamic systems. The performance of the direct method is also compared to the real trajectory followed by the train operator and exhibits up to 20% of fuel saving in the example route., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: The authors acknowledge the support of Spanish Ministerio de Economı´a, Industria y Competitividad through project TRA2016-78717-R.