Resultados de investigación

This folder contains the raw data from which the graphs in paper "Synchronization of Optomechanical Nanobeams by Mechanical Interaction", DOI: 10.1103/PhysRevLett.123.017402, have been obtained., European Commission: PHENOMEN - All-Phononic circuits Enabled by Opto-mechanics (713450), Peer reviewed

This folder contains the raw data from which the graphs in paper "Mechanical oscillations in lasing microsphere", DOI: 10.1063/1.4997182, have been obtained., European Commission: PHENOMEN - All-Phononic circuits Enabled by Opto-mechanics (713450), Peer reviewed

Dataset corresponding to the underlying data of PRIME scientific publications. - Publication title: Four-Dimensional Printed Liquid Crystalline Elastomer Actuators with Fast Photoinduced Mechanical Response toward Light-Driven Robotic Functions. - Publication reference: ACS Appl. Mater. Interfaces 2020, 12, 39, 44195. - Publication DOI: 10.1021/acsami.0c13341 - Figure 6 caption: Photoresponse of a dog bone-shaped LCE strip (110 μm thick) with uniaxial orientation. Director along the long axis of the element. A pre-stretching of the sample by a force of 2.4 mN has been applied prior to force measurements. Temporal dependence of force measurement under pulsed excitation (1 s, illumination starts at t = 0 s) with UV light (365 nm, purple line) at (a) 50, (c) 100, and (e) 200 mW/cm2. Temporal dependence of the sample surface temperature under pulsed excitation (1 s, illumination starts at t = 0 s) with UV light (365 nm, purple line) at (b) 50, (d) 100, and (f) 200 mW/cm2. PRIME. Advanced and versatile PRInting platform for the next generation of active Microfluidic dEvices, PRIME has received Funding from the European Union’s Horizon 2020 research and innovation programme under Grant Agreement No. 829010 and VIBRATE - Self-sustaining vibration and mechanical resonance effects in stimuli responsive liquid crystal polymer coatings and membranes (Vibrate) (669991), Peer reviewed

Dataset corresponding to the underlying data of PRIME scientific publications - Publication Title: Four-Dimensional Printed Liquid Crystalline Elastomer Actuators with Fast Photoinduced Mechanical Response toward Light-Driven Robotic Functions - Publication Reference: ACS Appl. Mater. Interfaces 2020, 12, 39, 44195. - Publication DOI: 10.1021/acsami.0c13341 Figure 4 caption: Photoresponse of a rectangular LCE strip (90 μm thick) with uniaxial orientation of the director along the long axis of the element with (a−c) low UV intensity (365 nm, 50 mW/cm2) and (d−f) high UV intensity (365 nm, 200 mW/cm2) exposure. A weight of 1 g is attached to the lower extreme of the strip. (a,d) Images of the LCE element successively acquired (i) before UV illumination, (ii) after UV illumination (after 4 and 1 min of illumination with 50 and 200 mW/cm2, respectively), (iii) 2 min after ceasing the UV illumination, and (iv) after 30 min of blue light illumination (455 nm, 4 mW/cm2). (b,e) Temporal dependence of normalized strip length during the initial part of the experiment showing contraction upon UV illumination (purple squares) with (b) 50 and (e) 200 mW/cm2 and the partial recovery of the length when UV illumination ceases (black squares). (b and d insets) Temporal dependence of normalized strip length during the whole experiment including the final blue light irradiation step (455 nm, 4 mW/cm2, for 30 min, blue squares). (c,f) Temporal dependence of temperature of the irradiated side of the LCE element illuminated (365 nm, purple line) with (c) 50 and (f) 200 mW/cm2. PRIME. Advanced and versatile PRInting platform for the next generation of active Microfluidic dEvices, PRIME has received Funding from the European Union’s Horizon 2020 research and innovation programme under Grant Agreement No. 829010 and VIBRATE - Self-sustaining vibration and mechanical resonance effects in stimuli responsive liquid crystal polymer coatings and membranes (Vibrate) (669991), Peer reviewed

Dataset corresponding to the underlying data of PRIME scientific publications. - Publication Title: Four-Dimensional Printed Liquid Crystalline Elastomer Actuators with Fast Photoinduced Mechanical Response toward Light-Driven Robotic Functions - Publication Reference: ACS Appl. Mater. Interfaces 2020, 12, 39, 44195. - Publication DOI: 10.1021/acsami.0c13341 - Figure 2 caption: Thermomechanical response of a uniaxially oriented strip (90 μm thick) with the director along its long axis. (a) Weight of 1 g attached to the extreme of the strip lifted upon heating. (i−iii) Camera images acquired on heating from (i) 30 °C to (ii) 100 °C and (iii) at 30 °C again after cooling down. (b) Temperature dependence of normalized length and width of the LCE strip during the heating process. The strip length and width were measured at 30 °C(L0 andW0, respectively) and during the temperature increase of the cycle (L and W, respectively). PRIME. Advanced and versatile PRInting platform for the next generation of active Microfluidic dEvices., PRIME has received Funding from the European Union’s Horizon 2020 research and innovation programme under Grant Agreement No. 829010 and VIBRATE - Self-sustaining vibration and mechanical resonance effects in stimuli responsive liquid crystal polymer coatings and membranes (Vibrate) (669991)., Peer reviewed

Dataset corresponding to the underlying data of PRIME scientific publications - Publication title: Four-Dimensional Printed Liquid Crystalline Elastomer Actuators with Fast Photoinduced Mechanical Response toward Light-Driven Robotic Functions - Publication reference: ACS Appl. Mater. Interfaces 2020, 12, 39, 44195. - Publication DOI: 10.1021/acsami.0c13341 - Figure S2 caption: Photoresponse of a dog-bone shaped LCE strip with uniaxial orientation. Peak force measurement at maximum under a sequence of ten pulses (pulse duration of 1 s with a periodicity of 11s) of UV light (365 nm) at 50 mW/cm2. PRIME. Advanced and versatile PRInting platform for the next generation of active Microfluidic dEvices., PRIME has received Funding from the European Union’s Horizon 2020 research and innovation programme under Grant Agreement No. 829010 and VIBRATE - Self-sustaining vibration and mechanical resonance effects in stimuli responsive liquid crystal polymer coatings and membranes (Vibrate) (669991)., Peer reviewed

OPEN DATA related to the research publication: Niklas Friedrich, Pedro Brandimarte, Jingcheng Li, Shohei Saito, Shigehiro Yamaguchi, Iago Pozo, Diego Peña, Thomas Frederiksen, Aran Garcia-Lekue, Daniel Sánchez-Portal, and José Ignacio Pascual, Magnetism of Topological Boundary States Induced by Boron Substitution in Graphene Nanoribbons, Phys. Rev. Lett. 125, 146801 (2020) [arXiv:2004.10280], Graphene nanoribbons (GNRs), low-dimensional platforms for carbon-based electronics, show the promising perspective to also incorporate spin polarization in their conjugated electron system. However, magnetism in GNRs is generally associated with localized states around zigzag edges, difficult to fabricate and with high reactivity. Here we demonstrate that magnetism can also be induced away from physical GNR zigzag edges through atomically precise engineering topological defects in its interior. A pair of substitutional boron atoms inserted in the carbon backbone breaks the conjugation of their topological bands and builds two spin-polarized boundary states around them. The spin state was detected in electrical transport measurements through boron-substituted GNRs suspended between the tip and the sample of a scanning tunneling microscope. First-principle simulations find that boron pairs induce a spin 1, which is modified by tuning the spacing between pairs. Our results demonstrate a route to embed spin chains in GNRs, turning them into basic elements of spintronic devices., We acknowledge funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 863098 (FET-Open project "SPRING")., Peer reviewed

The data correspond to figures in the paper by Ali, L.M.A. et al. Life Sciences 245 (2020) 117361. doi:10.1016/j.lfs.2020.117361., European Commission: NanoTBTech - Nanoparticles-based 2D thermal bioimaging technologies (801305) HOTZYMES - Redesigning biocatalysis: Thermal-tuning of one-pot multienzymatic cascades by nanoactuation (829162), Peer reviewed

These files contain the raw measurement data reported for the Radiomag interlaboratory comparison of magnetic hyperthermia characterisation measurements. Each heating curve for samples containing magnetic nanoparticles is presented in a separate excel file detailing the corrected-slope technique (CST) recalculation of the specific loss power and intrinsic loss power for that measurement as described in the manuscript. The measurements are organised into separate folders for Rounds 1 and 2 of the interlaboratory study, with further subfolders dividing the results for samples 1 and 2. Round 2 also includes the results for the “blank” pure water sample which was included in this Round. For each laboratory there is 3 repeated measurements of each sample during each round the study., This data is based upon work supported by the COST action (RADIOMAG TD1402), supported by COST (European Cooperation in Science and Technology). The financial support of the DFG research grants "quantMPI: Establishment of quantitative Magnetic Particle Imaging (MPI) application oriented phantoms for preclinical investigations" (TR 408/9-1) and "Matrix in Vision" (SFB 1340/1 2018, no 372486779, projects A02 and B02) are also gratefully acknowledged. Additional financial support was received from the Spanish Ministry of Economy and Competitiveness through the grants RED2018-102626-T, MAT2017-85617-R, MAT2017-86826-R and the "Severo Ochoa" Program for Centers of Excellence in R&D (SEV-2016-0686). Additional financial support was received from the Portuguese Foundation for Science and Technology (FCT) under UID/MULTI/04046/2013 (BioISI)., Peer reviewed

Population sizes, threats, and abundance change through time, for monitored plants in the Aragon Region (Spain) between 2010 and 2019., Regional Government of Aragón, the European Project RESECOM (LIFE+12 NAT/ES/000180), the OAPN (DYNBIO, grant 1656/2015), the Research Spanish Agency (VULBIMON, grant CGL2017-90040-R), and the Diputación Provincial de Huesca (2019), Peer reviewed