Pasar al contenido principal

Resultados de investigación

Rights
Projectcode
Resultados totales (Incluyendo duplicados): 54623
Encontrada(s) 5463 página(s)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
oai:riunet.upv.es:10251/238322
Datos de investigación Set de datos (Dataset)

Configuration of laminated wastes as radon barriers dataset

  • Ruvira-Quintana, Beatriz|||0000-0002-9108-1197
  • García-Gimeno, Belén|||0009-0002-7400-0655
  • García-Fayos, Beatriz|||0000-0002-7941-4243
  • Arnal Arnal, José Miguel
This dataset contains the experimental data generated during the evaluation of two configurations of laminated wastes, composed of polymeric and aluminium materials, as potential radon barriers for indoor spaces. It includes the raw radon concentration measurements recorded in the source and receiver chambers during 48-hour diffusion tests for each configuration, the main specifications of the experimental set-up used to perform the measurements, and the thickness of the laminated waste samples used in the study. The experimental data were used to calculate the radon concentration reduction and the radon diffusion coefficient, following a modified version of the ISO/TS 11665–13:2017 standard, as reported in the associated publication. The experimental data were generated using a two-chamber radon diffusion test following a modified version of ISO/TS 11665-13:2017. The experimental set-up consisted of two sealed AISI 316L stainless steel chambers separated by the test sample. A sealed pitchblende stone (1.469 kBq) was placed inside the source chamber, while the receiver chamber collected the radon that permeated through the sample. Radon concentration in both chambers was continuously monitored using two Durridge RAD7 detectors connected in closed-loop circuits. Temperature and relative humidity were monitored throughout the experiments. Each test lasted 48 hours, during which radon concentrations in the source and receiver chambers were recorded at 30-minute intervals. These raw experimental data were subsequently used to calculate the radon concentration reduction and the radon diffusion coefficient following the procedure described in ISO/TS 11665-13:2017. The dataset also includes the main specifications of the experimental set-up, such as chamber characteristics, radon source activity and test area. The thickness of each laminated waste sample was determined from eight measurements taken at different locations on the sample, from which the mean thickness and the standard deviation were calculated. Following the recommendations of the ISO/TS 11665-13:2017, the thickness of materials installed with an overlap is the same as that of the material unbound, provided that the length on each side of the overlap exceeds the width of the overlap by at least 2 cm. The radon concentration data recorded by the RAD7 detectors at 30-minute intervals were exported. For each experiment, the dataset includes the test date and the radon concentration values measured in the source and receiver chambers throughout the 48-hour test. No additional processing, filtering or normalization was applied to the concentration data before their inclusion in the dataset. The experimental set-up specifications were compiled from the laboratory protocol used during the diffusion tests. For the thickness data, the reported mean thickness and standard deviation were calculated from eight thickness measurements taken at different locations on each laminated waste sample.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
oai:riunet.upv.es:10251/230713
Datos de investigación Set de datos (Dataset)

Collection of reports generated by Ai2 ASTA to science studies queries [Dataset]

  • Orduña-Malea, Enrique|||0000-0002-1989-8477
  • Lopezosa García, Carlos
This dataset includes the raw data collected from Ai2 ASTA, a scholarly research assistant, through its functionality "Summarize literature". Specifically, the dataset includes the reports generated to ten tailored prompts, and the metadata of the cited references embedded in the reports., Grant PID2022-142569NA-I00 funded by MCIN/AEI/10.13039/501100011033 and, by “ERDF A way of making Europe”, by the “European Union”.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
oai:riunet.upv.es:10251/213330
Datos de investigación Set de datos (Dataset)

UX-comments: Evaluation of User eXperience in E-learning [Dataset]

  • Sanchis Font, Rosario
  • González Barba, José Ángel
  • Pla Santamaría, Ferran
  • Castro-Bleda, Maria Jose|||0000-0003-1001-8258
  • Hurtado Oliver, Lluis Felip|||0000-0002-1877-0455
Virtual learning environments are growing in importance as fast as e-learning, which is becoming highly demanded by universities and students worldwide. We have investigated how to automatically evaluate User eXperience in this domain using sentiment analysis techniques. For this purpose, the UX-comments corpus has been built with the opinions of 583 users (107 English speakers and 476 Spanish speakers) about three learning management systems in different courses. All the collected opinions were manually labeled with polarity information (P=positive, N=negative, or NEU=neutral) by three human annotators, both at the whole opinion and sentence levels. Dataset Information P NEU N Total Spanish Observations 338 53 85 476 Spanish Sentences 404 41 142 587 English Observations 56 21 30 107 English Sentences 90 14 80 184, Special thanks to the following biomedical organizations: Fundación IVI and Medigene Press S.L.; both have provided data from their Master and Posgraduate Courses through the academic stay research of Rosario Sanchis-Font, during 2017 and 2018. Many thanks to Carlos Turró-Ribalta and Ignacio Despujol-Zabala for supporting this research with data from UPV MOOCs.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
oai:riunet.upv.es:10251/232951
Datos de investigación Set de datos (Dataset)

Influence of Na2WO4 and H2O2 concentration during electrodeposition on nanotubes of TiO2 to form hybrid TiO2-WO3 nanostrutures [Dataset]

  • Sánchez Tovar, Rita
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • Ibáñez Arlandis, Laura
  • Fernández Domene, Ramón Manuel
  • Roselló Márquez, Gemma
  • Garcia-Anton, Jose|||0000-0002-0289-1324
Hybrid TiO2-WO3 nanostructures has been synthesized by electrochemical anodization under controlled hydrodynamic conditions followed by electrodeposition in the presence of different contents of Na2WO4 (5, 15 and 25 mM) and H2O2 (20, 30 and 40 mM). The influence of the electrolyte used for electrodeposition on the morphology, crystalline structure and photoelectrochemical response for water splitting has been evaluated through Field Emission Electronic Microscopy, High-Resolution Transmission Electron Microscopy, Confocal Raman Spectroscopy, Grazing Incidence X Ray Diffraction and photocurrent versus potential measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
oai:riunet.upv.es:10251/210833
Datos de investigación Set de datos (Dataset)

Datos del proyecto de investigación HYDELIFE

Optimización híbrida del ciclo de vida de puentes y estructuras mixtas y modulares de alta eficiencia social y medioambiental bajo presupuestos restrictivos
  • Yepes, V.|||0000-0001-5488-6001
  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
  • Alcalá-González, Julián|||0000-0003-1376-8441
[ES] La sostenibilidad económica y el desarrollo social de la mayoría de los países dependen, entre otros, del comportamiento fiable y duradero de sus infraestructuras. HYDELIFE aborda el reto de la sostenibilidad social y medioambiental de las estructuras a lo largo de su ciclo de vida. Para ello se propone una metodología híbrida emergente entre Deep Learning (DL) procedente de la inteligencia artificial, metamodelos y metaheurísticas de optimización multiobjetivo y técnicas de toma de decisión multicriterio. El foco se centra en el diseño robusto y resiliente aplicado a la construcción industrializada modular, tanto en edificación, como en puentes mixtos de hormigón y acero y en estructuras híbridas de acero. El gran reto será disponer de infraestructuras capaces de maximizar su beneficio social sin comprometer su sostenibilidad. Por otra parte, el envejecimiento de las infraestructuras, la mayor demanda en su desempeño o los riesgos naturales afectan al rendimiento previsto de estas infraestructuras. Si a ello añadimos la profunda crisis financiera y sanitaria que ha afectado la economía de nuestro país, el deterioro de las infraestructuras puede provocar una alarma social puntual. La hipótesis de partida es que las emergentes metaheurísticas híbridas son capaces de extraer información no trivial de las inmensas bases de datos procedentes de la optimización y mejorar la calidad y el tiempo de cálculo tanto en el diseño automático como en el mantenimiento óptimo de puentes y estructuras. Con esta propuesta metodológica se pretende abordar las incertidumbres del mundo real planteando el diseño y el mantenimiento óptimo basándose en la fiabilidad y en diseños robustos. Esta hipótesis debe extenderse a los procesos de toma de decisión multicriterio que atienda a la sostenibilidad social y ambiental del ciclo de vida completo que contemple las fluctuaciones tanto de los parámetros como de los escenarios posibles, especialmente en el caso de fuertes restricciones presupuestarias. Esta metodología presenta, no obstante, serias dificultades, por lo que se deben explorar metamodelos y DL capaces de acelerar los complejos procesos de cálculo. Además, se pretende profundizar en las técnicas de decisión multicriterio emergentes como la lógica neutrosófica y otras como las redes bayesianas. En este contexto, a pesar de que se ha avanzado en la optimización multiobjetivo de las estructuras, en el mundo real existen incertidumbres, imperfecciones o desviaciones respecto a los parámetros utilizados en los códigos. Una estructura óptima se encuentra cercana a la región de infactibilidad, por lo que es necesario incorporar las incertidumbres para proporcionar diseños más robustos y fiables. Por otra parte, la fuerte limitación presupuestaria presente en momentos de crisis compromete seriamente las políticas de creación y conservación de las infraestructuras. Los resultados esperados, tras un análisis de sensibilidad de distintas políticas presupuestarias asociadas a un horizonte temporal, pretenden detallar qué tipologías, actuaciones concretas de conservación y alternativas de demolición y reutilización son adecuadas para minimizar los impactos ambientales y sociales considerando la variabilidad. En este sentido, un aspecto importante consiste en determinar los criterios e indicadores clave para garantizar una efectiva integración de la sostenibilidad en la licitación de proyectos de obra y de mantenimiento de construcciones modulares y puentes mixtos., Los autores agradecen la financiación del proyecto PID2020-117056RB-I00 financiado por el Ministerio de Ciencia e Innovación MCIN / AEI / 10.13039 / 501100011033 y por “FEDER Una manera de hacer Europa”.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
oai:riunet.upv.es:10251/162329
Datos de investigación Set de datos (Dataset)

Datos Spectrum

  • Rodríguez Burruezo, Adrián|||0000-0002-4530-8071
  • Gonzalo Gurrea-Ysasi|||0000-0001-5658-1201
  • Blanca-Giménez, Vicente|||0000-0003-3738-6085
  • Fita Fernández, Inmaculada Concepción|||0000-0002-0927-3668
  • Fita, Ana|||0000-0002-8637-5852
  • Prohens Tomás, Jaime|||0000-0003-1181-9065
[ES] Los datos se utilizaron para diseñar curvas de temperatura y humedad
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
oai:riunet.upv.es:10251/162285
Datos de investigación Set de datos (Dataset)

Encuesta de Actitudes hacia la Estadística en Secundaria

  • Peiró Signes, Angel|||0000-0002-1549-6972
  • TRULL DOMÍNGUEZ, OSCAR|||0000-0003-2896-8606
[ES] Esta base de datos utiliza La Encuesta de actitudes hacia la estadística creada por Auzmendi (2009). Los datos se corresponden con los resultados de la encuesta pasados a alumnos de un único instituto de enseñanza secundaria en 3 niveles (4º de la ESO, 1BACH y 2BACH) a alumnos que han estado en contacto con conceptos estadísticos en la asignatura de matemáticas. La encuesta mide 5 dimensiones de las actitudes hacia la estadística. Motivación, confianza, ansiedad, utilidad y satisfacción
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
oai:riunet.upv.es:10251/118266
Datos de investigación Set de datos (Dataset)

Twitter Dataset - 2016 UCI Track Cycling World Championships

  • Lamirán Palomares, José María
  • Baviera, Tomás|||0000-0002-2331-6628
  • Baviera-Puig, Amparo|||0000-0002-2258-1155
[EN] Social media platforms have had a significant impact on the public image of sports in recent years. Through the relational dynamics of the communication on these networks, many users have emerged whose opinions can exert a great deal of influence on public conversation online. This research aims to identify the influential Twitter users during the 2016 UCI Track Cycling World Championships using different variables which, in turn, represent different dimensions of influence (popularity, activity and authority). Mathematical variables of the social network analysis and variables provided by Twitter and Google are compared. As a result, no single variable assessed is sufficient to identify the different kinds of influential Twitter users. Having a certain type of account is not enough to make a user an influencer if they do not engage (actively or passively) in the conversation. Choosing some influencers or others will depend on the objectives pursued.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
oai:riunet.upv.es:10251/193255
Datos de investigación Set de datos (Dataset)

Combining pharmacokinetic and electrophysiological models for early prediction of drug-induced arrhythmogenicity

  • Llopis-Lorente, Jordi
  • Baroudi, Samuel
  • Koloskoff, Kévin
  • Basset, Matthieu
  • Benito, Sylvain
  • Dayan, Frederic
  • Romero Pérez, Lucia|||0000-0003-4605-8630
  • Mora-Fenoll, María Teresa|||0000-0002-8069-2486
  • Saiz Rodríguez, Francisco Javier|||0000-0002-9850-0825
  • Trenor Gomis, Beatriz Ana|||0000-0001-9166-6112
This repository contains the code used to generate the male and female population of models and simulate the different pharmacokinetic scenarios in Llopis-Lorente et al. (2023). Combining pharmacokinetic and electrophysiological models for early prediction of drug-induced arrhythmogenicity
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
oai:riunet.upv.es:10251/220566
Datos de investigación Set de datos (Dataset)

Electrooxidation of polystyrene nanoplastics by BDD electrodes [Dataset]

Influence of the doping level of boron-doped diamond electrodes in the electrooxidation of polystyrene nanoplastics
  • Cases, Francisco|||0000-0001-8105-4489
  • Rodrigo Roca, Rubén
  • Molina Puerto, Javier|||0000-0003-3378-8271
  • Bonastre Cano, José Antonio|||0000-0002-5068-6608
  • Muñoz Ortuño, Lucía
[EN] Microplastics and nanoplastics have arisen as contaminants of emerging concern due to the wide use of plastics, and the application of boron-doped diamond (BDD) electrodes for their removal is promising. In this study, we report the influence of BDD doping levels (500, 2500, and 10000 ppm B doping) on the electrooxidation of polystyrene nanoplastics (100 nm, 20 mg⋅L-1). Different current densities (50, 25, 12.5, and 5 mA⋅cm-2) have been applied to determine the best electrolysis conditions for each electrode type. In addition, hydroxyl radical (•OH), persulphate (S2O82-), and hydrogen peroxide (H2O2) reactive species have been determined to understand the influence of the species generated on the degradation of NPs. BDD500 electrode presents the fastest degradation of PS NPs at low current densities (12.5 and 5 mA⋅cm-2), BDD2500 at 25 mA⋅cm-2, and BDD10000 at 50 mA⋅cm-2. Among oxidative species determined, S2O82- is the one generated with the highest concentration and seems to command the degradation of PS NPs, since at 25, 12.5, and 5 mA⋅cm-2, the electrodes that produce more S2O82- degrade faster PS NPs. At 50 mA⋅cm-2, the differences between the different electrodes were minimal. The highest mineralization (as measured by non-purgeable organic carbon measurements) was obtained for BDD500 at 50, 25, and 12.5 mA⋅cm-2, and BDD2500 at 5 mA⋅cm-2., This research is part of the Spanish R +D +i contract TED2021-130905B-I00 funded by MCIN/AEI /10.13039/501100011033 and by the European Union NextGenerationEU/PRTR as well as the Red E3Tech Plus: Proyecto Redes de Investigación de la AEI Network E3Tech PLUS (RED2022-134552-T) project. Funding for open access charge: CRUE- Universitat Politècnica de València. The Electron Microscopy Service of the UPV (Universitat Politècnica de València) is gratefully acknowledged for help with TEM and FESEM characterization.
Buscador avanzado