Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Methodology for comparative assessment of battery technologies: experimental design, modeling, performance indicators and validation with four technologies

  • Irujo Izcue, Elisa
  • Berrueta Irigoyen, Alberto
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
An increasing number of applications with diverse requirements incorporate various battery technologies. Selecting the most suitable battery technology becomes a tedious task as several aspects need to be taken into account. Two of the key aspects are the battery characteristics under temperature variations and their degradation. While numerous contributions using tailored assessment methods to evaluate both aspects for a particular application exist in the literature, a general methodology for analysis is necessary to enable a quantitative comparison between different technologies. We propose in this paper a novel methodology, based on performance indicators, to quantify the potential and limitations of a battery technology for diverse applications sharing a similar operational profile. A quantification of phenomena such as the influence of high and low temperatures on the battery, or the effect of cycling and state of charge on battery aging is obtained. In pursuit of these indicators, an experimental procedure and the fitting of aging model parameters that allow their calculation are proposed. As an additional outcome of this work, a general aging model that allows comprehensive analysis of aging behavior is developed and the trade-off between experimental time and accuracy is analyzed to find an optimal experimental time between 2 and 4 months, depending on the studied battery technology. Finally, the proposed methodology is applied to four battery technologies in order to show its potential in a real case-study., This work was supported by grants PID2022-139914OB-I00 funded by MICIU/AEI/10.13039/501100011033/ (Spain) and by ERDF/EU (European Union), TED2021-132457B-I00 funded by MICIU/AEI/10.13039/501100011033/ (Spain) and by the NextGenerationEU/PRTR (European Union), HYBPLANT (0011-1411-2022-000039) funded by the Government of Navarre (Spain), and Lion2H2 (PJUPNA2023-11380) funded by the Public University of Navarre (Spain). Elisa Irujo was supported by a predoctoral contract from the Public University of Navarre (Spain).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

On the characterization of lithium-ion batteries under overtemperature and overcharge conditions: identification of abuse areas and experimental validation

  • Lalinde Sainz, Iñaki
  • Berrueta Irigoyen, Alberto
  • Arza, Joseba
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
Although lithium-ion batteries have gained considerable popularity in renewable energy and electric vehicle applications, their safety still remains a concern under certain voltage, temperature, or state of charge conditions. This can lead to degradation and potential thermal runaway. In order to improve the safety assessment of LIBs based on their operating conditions, it is therefore essential to analyze not only their safe operating area but also their abuse region. This study focuses on the characterization of the abuse region of lithium-ion batteries by proposing a new methodology in which four areas of abuse are identified and experimentally validated using a commercial 3.6 Ah pouch cell. The cell is subjected to overtemperature and overcharge conditions, exploring various states of charge (0 to 200%) and ambient temperatures (25 to 100 °C). The influence of temperature and state of charge on the battery's behavior is thoroughly analyzed to fully characterize the abuse region. Results reveal the limiting temperatures and states of charge that define the boundaries of the abuse areas. By extending the characterization of LIBs behavior beyond the safe operation area with the determination of four areas of abuse, this article contributes to a better understanding of the phenomena and abuse mechanisms produced by overtemperature and overcharge events with an eye to improving battery safety., This work is part of the projects PID2019-111262RB-I00, funded by MCIN/AEI/10.13039/501100011033/, TED2021-132457B-I00, funded by MCIN/AEI/10.13039/501100011033/ and by the European Union “NextGenerationEU/PRTR”, STARDUST, funded by European Union’s Horizon 2020 research and innovation program, HYBPLANT, Spain (0011-1411-2022-000039), funded by Government of Navarre, Spain, and a Ph.D. scholarship (PRE2020-095314), funded by Spanish Ministry of Science and Innovation. Open access funding provided by Universidad Pública de Navarra, Spain.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

A novel aging modeling approach for second-life lithium-ion batteries

  • Pérez Ibarrola, Ane
  • San Martín Biurrun, Idoia
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
The electric mobility industry is booming. In order to reduce the environmental impact of this boom, there is the potential to reuse the batteries from electric vehicles. However, the technical and economic feasibility of the second-life of lithium-ion batteries remains in question. This is due to the intricate non-linear mechanisms that occur during battery degradation, leading to capacity and power loss. Ongoing research aims to create models that can predict the state of battery degradation. However, most studies have focused on the battery's first life, operating within a limited state of health range and requiring constant monitoring of the battery's exposure conditions. While these models provide satisfactory results for the battery's performance in vehicles, they cannot be directly applied to second-life scenarios. In response to this issue, this article proposes a degradation modeling method for second-life batteries based on identifying and linearizing different degradation trends within the battery. This approach allows the application of the model without prior knowledge of the battery's history. It has been validated for a state of health range of 95% to 20%, through both conventional charge-discharge tests and a real-world scenario involving a smart charging station for urban buses. The results obtained with the developed model are overall satisfactory, achieving a MAPE below 3% for capacity and 1.4% for internal resistance in the real-world scenario., This work was supported by grants PID2022-139914OB-I00 funded by MICIU/AEI/10.13039/501100011033/ (Spain) and by ERDF/EU (European Union), TED2021-132457B-I00 funded by MICIU/AEI/10.13039/501100011033/ (Spain) and by the NextGenerationEU/PRTR (European Union), HYBPLANT (0011-1411-2022-000039) and PRIDEBAT (PC24-PRIDEBAT-014-002) funded by the Departamento de Universidad, Innovación y Transformación Digital (Department of University, Innovation and Digital Transformation) of the Goverment of Navarre (Spain), and Lion2H2 (PJUPNA2023-11380) funded by the Public University of Navarre (Spain).