Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 41
Encontrada(s) 1 página(s)

Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Identification of critical parameters for the design of energy management algorithms for Li-ion batteries operating in PV power plants

  • Berrueta Irigoyen, Alberto
  • Soto Cabria, Adrián
  • Marcos Álvarez, Javier
  • Parra Laita, Íñigo de la
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
Lithium-ion batteries are gaining importance for a variety of applications due to their price decrease and characteristics improvement. For a proper use of such storage systems, an energy management algorithm (EMA) is required. A number of EMAs, with various characteristics, have been published recently, given the diverse nature of battery problems. The EMA of deterministic battery problems is usually based on an optimization algorithm. The selection of such an algorithm depends on a few problem characteristics, which need to be identified and closely analyzed. The aim of this article is to identify the critical optimization problem parameters that determine the most suitable EMA for a Li-ion battery. With this purpose, the starting point is a detailed model of a Li-ion battery. Three EMAs based on the algorithms used to face deterministic problems, namely dynamic, linear, and quadratic programming, are designed to optimize the energy dispatch of such a battery. Using real irradiation and power price data, the results of these EMAs are compared for various case studies. Given that none of the EMAs achieves the best results for all analyzed cases, the problem parameters that determine the most suitable algorithm are identified to be four, i.e., desired computation intensity, characteristics of the battery aging model, battery energy and power capabilities, and the number of optimization variables, which are determined by the number of energy storage systems, the length of the optimization problem, and the desired time step., This work was supported in part by the European Union under the H2020 Project STARDUST under Grant 774094, in part by the Spanish State Research Agency and FEDER-UE under Grants DPI2016-80641-R, DPI2016-80642-R, PID2019-111262RB-I00, and PID2019-110956RB-I00, in part by the Government of Navarra through Research Project 0011-1411-2018-000029 GERA, and in part by the Public University of Navarre under Project ReBMS PJUPNA1904.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Tesis doctoral (DoctoralThesis)

Enabling intelligent and interactive immersion in smart environments

  • Al-Rahamneh, Anas
In recent years, the Smart City concept has grown in popularity, and a significant number of cities around the world have adopted smart city strategies. Smart and sustainable cities are an emerging urban development approach due to their immense potential to improve environmental sustainability. The Smart City concept is based on collecting, analyzing, and displaying a large amount of data and information concerning urban systems and subsystems. As time goes by, the capacity of smart cities for generating digital information has grown exponentially. However, this digital information is heterogeneous, massive, collected from different sources, generated in different formats, and in most cases not structured, which exacerbates the situation of extracting valuable knowledge from data. Therefore, it is fundamental to handle the significant volumes of heterogeneous sensed data and to integrate such data along with information and analysis tools into a comprehensive platform. This can ensure the security, efficiency, and performance of the different Smart City tasks. A comprehensive software platform could provide services such as facilities for application development, integration of heterogeneous data sources, deployment, and management to ease the construction of sophisticated Smart Cities’ applications. In this context, the work begins with a concise description of the concept of smart city and the technologies involved in it. It addresses the development of an urban data platform along with how to obtain and integrate information from sensors and other data sources, in order to provide aggregated and intelligent views of raw data to support various domains within the city; in our case, smart mobility. The platform architecture is implemented following a five-layer model that considers elements from perception, sensing to data management, processing, and visualization. With the aim of evaluating the efficiency of the developed platform, three different use cases are described and analyzed, which have been implemented in the city of Pamplona, Spain, as vertical services linked to the platform: intelligent urban mobility-bike handling, bike-2-bike communication, and restricted vehicle access zone control system. Ultimately, this work provides an experiment to assess different long-range wireless communication technologies to enable their implementation within an urban environment., This work was partially supported by the European Union’s Horizon 2020 Research and Innovation Programme (STARDUST-Holistic and Integrated Urban Model for Smart Cities) under Grant 774094, by the Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (Agencia Estatal de Investigación, Fondo Europeo de Desarrollo Regional-FEDER, European Union) under Grant RTI2018-095499-B-C31 IoTrain, and by Gobierno de Navarra under Grant PC183-184 (Securing information and applications in V2G environments, SECV2G)., Programa de Doctorado en Tecnologías de las Comunicaciones, Bioingeniería y de las Energías Renovables (RD 99/2011), Bioingeniaritzako eta Komunikazioen eta Energia Berriztagarrien Teknologietako Doktoretza Programa (ED 99/2011)
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Deterministic wireless channel characterization towards the integration of communication capabilities to enable context aware industrial internet of thing environments

  • Picallo Guembe, Imanol
  • Iturri López, Peio
  • Celaya Echarri, Mikel
  • Azpilicueta Fernández de las Heras, Leyre
  • Falcone Lanas, Francisco
In order to provide interactive capabilities within the context of Internet of Thing (IoT) applications, wireless communication systems play a key role, owing to in-herent mobility, ubiquity and ease of deployment. However, to comply with Quality of Service (QoS) and Quality of Experience (QoE) metrics, coverage/capacity analysis must be performed, to account for the impact of signal blockage as well as multiple interference sources. This analysis is especially complex in the case of indoor scenarios, such as those derived from Industrial Internet of Things (IIoT). In this work, a fully volumetric approach based on hybrid deterministic 3D Ray Launching is employed providing precise wireless channel characterization and hence, system level analysis of indoor scenarios. Coverage/capacity, interference mapping and time domain characterization estimations will be derived, considering different frequencies of operation below 6 GHz. The proposed methodology will be tested against a real measurement scenario, providing full flexibility and scalability for adoption in a wide range of IIoT capable environments., Open Access funding provided by Universidad Pública de Navarra. This work was supported by the European Union’s Horizon 2020 research and Innovation programme under grant agreement N°774094 (Stardust-Holistic and Integrated Urban Model for Smart Cities) and by Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (Agencia Estatal de Investigación, Fondo Europeo de Desarrollo Regional -FEDER-, European Union) under the research grant RTI2018-095499-B-C31 IoTrain.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Applied method to model the thermal runaway of lithium-ion batteries

  • Lalinde Sainz, Iñaki
  • Berrueta Irigoyen, Alberto
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
The thermal runaway (TR) is one of the most dangerous phenomena related to lithium-ion batteries. For this reason, there are different proposals in the literature for its modelling. Most of these proposed models take into account the decomposition reactions between the internal components of the cell, and base the adjustment of the parameters on numerous abuse tests that lead to the appearance of TR. However, these tests are destructive, require specific equipment, present a high economic cost and are very time consuming. This paper proposes a modelling method which enables the development of TR models with the use of fewer resources. This method is based on chemical kinetics, which allow a simplification of the general modelling process published in the literature. At the same time it maintains good accuracy and makes it possible to define the TR behavior of any type of cell, regardless of its chemistry, shape or size. Furthermore, the proposed method allows the use of the experimental results most commonly presented in the specialized literature, which significantly reduces the need for destructive testing. The presented modelling method achieves a good compromise between accuracy and applicability in the validations shown in the paper., This work has been supported by the Spanish State Research Agency (AEI) under grant PID2019-111262RB-I00 /AEI/ 10.13039/501100011033, the European Union under the H2020 project STARDUST (774094), and the Public University of Navarra under project ReBMS PJUPNA1904.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Onset of irreversible reactions in overcharging lithium-ion cells: an experimental and modeling approach

  • Irujo Izcue, Elisa
  • Berrueta Irigoyen, Alberto
  • Lalinde Sainz, Iñaki
  • Arza, Joseba
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
Lithium-ion batteries are energy storage systems used in an increasing number of applications. Due to their flammable materials, their use entails risks of fire and explosion. The study of the abuse operation of these batteries before reaching the thermal runaway is a relevant research topic to prevent safety issues. There are various studies in the bibliography providing exhaustive thermal studies of the safe operating area, as well as concerning the thermal runaway. However, the onset irreversible reactions, that take place at a SOC around 110%, have not been properly analyzed. We present in this contribution an experimental study of this onset reaction measured in pouch Li-ion cells under various conditions of charge current and temperature. We also propose a lumped-parameter thermal model for the cell, which allows a detailed characterization of this exothermic reaction. The results achieved in this contributions can be a key tool to prevent overcharge accidents that may arise due to malfunctioning of the battery charger or battery management system., This work is part of the projects PID2019-111262RB-I00, funded by MCIN/AEI/10.13039/501100011033/, TED2021-132457B-I00, funded by MCIN/AEI/10.13039/501100011033/ and by the European Union NextGenerationEU/PRTR, STARDUST (774094), funded by European Union's Horizon 2020 research and innovation programme, HYBPLANT (0011-1411-2022- 000039), funded by Government of Navarre, and has also been supported by MCIN/AEI/10.13039/501100011033/ and by European Social Fund under a PhD scholarship (grant PRE2020-095314).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Wireless characterization and assessment of an UWB-Based system in industrial environments

  • Picallo Guembe, Imanol
  • Iturri López, Peio
  • Klaina, Hicham
  • Glaría Ezker, Guillermo
  • Sáez de Jáuregui Urdanoz, Félix
  • Zabalza Cestau, José Luis
  • Azpilicueta Fernández de las Heras, Leyre
  • Falcone Lanas, Francisco
The advent of Indsutrial Internet of Things is one of the main drivers for the implementation of Industry 4.0 scenarios and applications, in which wireless communication systems play a key role in terms of flexibility, mobility and deployment capabilities. However, the integration of wireless communication systems poses challenges, owing to variable path loss conditions and interference impact. In this work, an Ultra-Wideband (UWB) system for indoor location in very large, complex industrial scenarios is presented. Precise wireless channel characterization for the complete volume of a logistical plant is performed, based on 3D hybrid ray launching approximation, in order to aid network node design process. Wireless characterization, implementation and measurement results are obtained for both 4 GHz and 6 GHz frequency bands, considering different densities of scatterers within the scenario under test. Time domain estimation results have been obtained and compared with time of flight measurement results, showing good agreement. The proposed methodology enables to perform system design and performance tasks, analyzing the impact of variable object density conditions in wireless channel response, providing accurate time of flight estimations without the need of complex channel sounder systems, aiding in optimal system planning and implementation., This work was supported in part by the European Union’s Horizon 2020 Research and Innovation Programme (Stardust-Holistic and Integrated Urban Model for Smart Cities) under Grant 774094, in part by the Ministerio de Ciencia through the Innovación y Universidades, Gobierno de España (Agencia Estatal de Investigación, Fondo Europeo de Desarrollo Regional—FEDER, European Union) under Grant RTI2018-095499-B-C31 IoTrain, and in part by the Gobierno de Navarra-Departamento de Desarrollo Económico under Grant 0011-1365-2019-000097 OEE LOG.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Health indicator selection for state of health estimation of second-life lithium-ion batteries under extended ageing

  • Braco Sola, Elisa
  • San Martín Biurrun, Idoia
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
  • Stroe, Daniel-Ioan
Nowadays, the economic viability of second-life (SL) Li-ion batteries from electric vehicles is still uncertain. Degradation assessment optimization is key to reduce costs in SL market not only at the repurposing stage, but also during SL lifetime. As an indicator of the ageing condition of the batteries, state of health (SOH) is currently a major research topic, and its estimation has emerged as an alternative to traditional characterization tests. In an initial stage, all SOH estimation methods require the extraction of health indicators (HIs), which influence algorithm complexity and on-board implementation. Nevertheless, a literature gap has been identified in the assessment of HIs for reused Li-ion batteries. This contribution targets this issue by analysing 58 HIs obtained from incremental capacity analysis, partial charging, constant current and constant voltage stage, and internal resistance. Six Nissan Leaf SL modules were aged under extended cycling testing, covering a SOH range from 71.2 % to 24.4 %. Results show that the best HI at the repurposing stage was obtained through incremental capacity analysis, with 0.2 % of RMSE. During all SL use, partial charge is found to be the best method, with less than 2.0 % of RMSE. SOH is also estimated using the best HI and different algorithms. Linear regression is found to overcome more complex options with similar estimation accuracy and significantly lower computation times. Hence, the importance of analysing and selecting a good SL HI is highlighted, given that this made it possible to obtain accurate SOH estimation results with a simple algorithm., This work is part of the projects PID2019-111262RB-I00, funded by MCIN/AEI/10.13039/501100011033/, STARDUST (774094), funded by European Union's Horizon 2020 research and innovation programme, HYBPLANT (0011-1411-2022-000039), funded by Government of Navarre, and a Ph.D. scholarship, also funded by Government of Navarre. Open access funding provided by Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Temperature indicators and overtemperature detection in lithium-ion batteries based on electrochemical impedance spectroscopy

  • Lalinde Sainz, Iñaki
  • Berrueta Irigoyen, Alberto
  • Soto Cabria, Adrián
  • Arza, Joseba
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
Lithium-ion batteries are the leading technology for energy storage systems due to their attractive advantages. However, the safety of lithium-ion batteries is a major concern, as their operating conditions are limited in terms of temperature, voltage and state of charge. Therefore, it is important to monitor the conditions of lithium-ion batteries to guarantee safe operation. To this end, in the present work, we analyze electrochemical impedance spectroscopy (EIS) as a tool to estimate the temperature of batteries. Overtemperature abuse tests from 25 °C to 140 °C are performed at various states of charge, and EIS measurements are obtained during the tests. The influence of temperature on cell impedance at different frequencies is analyzed and new findings are revealed. The real part of the impedance is identified to be the best indicator for cell temperature estimation by EIS. In addition, the best frequency to achieve accurate temperature monitoring, avoiding disturbances produced by state of charge variations, is proposed based on experimental results. Finally, EIS is proven to be a reliable technique for overtemperature and thermal runaway detection., This work is part of the projects PID2019-111262RB-I00, funded by MCIN/AEI/10.13039/501100011033/, TED2021-132457B-I00, funded by MCIN/AEI/10.13039/501100011033/ and by the European Union NextGenerationEU/PRTR, STARDUST (774094), funded by European Union’s Horizon 2020 research and innovation programme, HYBPLANT (0011-1411-2022- 000039), funded by Government of Navarre, and has also been supported by MCIN/AEI/10.13039/501100011033/ and by European Social Fund under a PhD scholarship (grant PRE2020-095314).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Basketball player on-body biophysical and environmental parameter monitoring based on wireless sensor network integration

  • Picallo Guembe, Imanol
  • Iturri López, Peio
  • Astrain Escola, José Javier
  • Aguirre Gallego, Erik
  • Azpilicueta Fernández de las Heras, Leyre
  • Celaya Echarri, Mikel
  • Villadangos Alonso, Jesús
  • Falcone Lanas, Francisco
Sport activities have benefited in recent years from the progressive adoption of different technological assets in order to improve individual as well as group training, collect different statistics or enhance the spectator experiences. The progressive adoption of Internet of Things paradigms can also be considered within the scope of sport activities, providing high levels of user interactivity as well as enabling cloud-based data storage and processing. In this work, a system for monitoring biophysical, kinematic and environmental parameters within the development of basketball training is presented. A set of on-body nodes with multiple sensors and wireless body area network capabilities have been designed, implemented and tested under real training conditions during a match. Wireless channel analysis results have been obtained with the aid of in house implemented deterministic 3D ray launching algorithm, providing accurate coverage/capacity estimations in relation with human body consideration in the field as well as in the stadium. Measurement results give relevant information in relation with individual player characteristics as well as with team characteristics, providing a flexible tool to improve training development of basketball., This work was supported in part by the Ministerio de Ciencia, Innovación y Universidades, Spain, (MCIU)/Agencia Estatal de Investigación (AEI)/Fondo Europeo de Desarrollo Regional (FEDER)/European Union under Grant RTI2018-095499-B-C31 (IoTrain), and in part by the European Union's Horizon 2020 Research and Innovation Program (Stardust-Holistic and Integrated Urban Model for Smart Cities) under Grant 774094.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Integrated lithium-ion battery model and experimental validation of a second-life prototype

  • Pérez Ibarrola, Ane
  • San Martín Biurrun, Idoia
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
A battery model predicts the battery performance, which can be a useful tool for optimizing battery design and preventing unsafe operation. This becomes especially significant in second-life batteries where the cells have already endured degradation and predicting the lifetime becomes challenging. The assessment of physical phenomena is often performed individually, but the overall battery behavior depends on their interaction. For this purpose, an integrated battery model is developed. Equivalent electric circuits are interconnected to represent the electrochemical reactions, thermodynamic phenomena, and heat transfer mechanisms of the battery. To consider cell degradation, calendar and cycling aging were represented using a semi-empirical model. A battery management system is included to oversee and remain within the safe limits of battery voltage, temperature, and current. Additionally, a passive cell balancing distributes charge evenly. The integrated model is applied to a second-life battery prototype with a nominal capacity and power of 45 Ah and 4 kW, respectively. Its performance is validated with constant current and power cycles, as well as in a microgrid with photovoltaic generation under a self-consumption profile. The model accurately reproduces experimental results of battery power, voltage, temperature, and state of charge., This work is part of the projects PID2019-111262RB-I00, funded by MCIN/AEI/10.13039/501100011033/, TED2021-132457B-I00, funded by MCIN/AEI/10.13039/501100011033/ and by the European Union NextGenerationEU/PRTR, STARDUST (774094), funded by European HYBPLANT (0011-1411-2022-000039), funded by Government of Navarre.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Lithium-ion second-life batteries: aging modeling and experimental validation

  • Pérez Ibarrola, Ane
  • San Martín Biurrun, Idoia
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
Re-utilizing lithium-ion batteries from electric vehicles reduces their environmental impact. To ensure their optimal sizing and safe use, identifying the current state of the battery and predicting its remaining useful life is essential. This work analyzes the degradation mechanisms involved and proposes an aging model that utilizes a semi-empirical approach to accurately reproduce the battery's state of health within a range of 75-45 %. Calendar aging includes dependencies on temperature and state of charge while cycling aging is modeled based on depth of discharge, medium SOC, temperature, and Crate. The model is validated against experimental data from 14 LMO/LNO cells previously used in actual Nissan Leaf vehicles and an RMSE bellow 2.5 % is achieved in every case., This work is part of the projects PID2022-139914OB-I00, funded by MICIU/ AEI/10.13039/501100011033/ and by 'ERDF/EU' , TED2021-132457BI00, funded by MICIU/AEI/10.13039/501100011033/ and by the European Union 'NextGenerationEU/PRTR', STARDUST (H2020-SCC-2016/17- 774094), funded by the European Union's Horizon 2020 research and innovation program, HYBPLANT (0011-1411-2022-000039), funded by the Government of Navarre, and Lion2H2 (PJUPNA2023-11380), funded by the Public University of Navarre.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Patient tracking in a multi-building, tunnel-connected hospital complex

  • Trigo Vilaseca, Jesús Daniel
  • Klaina, Hicham
  • Picallo Guembe, Imanol
  • Iturri López, Peio
  • Astrain Escola, José Javier
  • Falcone Lanas, Francisco
  • Serrano Arriezu, Luis Javier
Patients admitted to Intensive Care Units (ICU) are transported from and to other units. Knowing their location is strategic for a sound planning of intra-hospital transports as well as resources management. This is even more crucial in big hospital complexes, comprised of several buildings often connected through tunnels. In this work, a patient tracking application in a multi-building, tunnel-connected hospital complex (the Hospital Complex of Navarre) is presented. The system leverages Internet of Medical Things (IoMT) communication technologies, such as Long Range Wide-Area Network (LoRaWAN) and Near Field Communication (NFC). The locations of the LoRaWAN nodes were selected based on several factors, including the situation of the tunnels, buildings services and medical equipment and a literature review on intra-hospital ICU patients' trips. The possible locations of the LoRaWAN gateways were selected based on 3D Ray Launching Simulations, in order to obtain accurate characterization. Once the locations were set, a LoRaWAN radio coverage studio was performed. The main conclusion drawn is that just one LoRaWAN gateway would be enough to cover all overground LoRaWAN nodes deployed. A second one would be required for underground coverage. In addition, a remote, private cloud infrastructure together with a mobile application was created to manage the information generated. On-field tests were performed to assess the technical feasibility of the system. The application provides with on-demand ICU patients' movement flow around the complex. Although designed for the ICU-admitted patients' context, the system could be easily extrapolated to other use cases., This work was supported in part by the Project 'Arquitectura 'Internet of Medical Things' (IoMT) para la monitorización y gestión semántica de datos relativos a enfermedades cardiovasculares' funded by the Universidad Pública de Navarra under Grant PJUPNA29, in part by the Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER,UE) under Project TEC2017-85529-C03-3R and Project RTI2018-095499-B-C31, and in part by the European Union's Horizon 2020 Research and Innovation Programme (Stardust-Holistic and Integrated Urban Model for Smart Cities) under Agreement N. 774094.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Impact of micro-cycles on the lifetime of lithium-ion batteries: an experimental study

  • Soto Cabria, Adrián
  • Berrueta Irigoyen, Alberto
  • Mateos Inza, Miren
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
Experimental aging studies are commonly conducted on lithium-ion batteries by full charge and discharge cycles. However, such profiles may differ from the actual operation of batteries in electric vehicles and stationary applications, where they are subjected to different partial charges and discharges. These partial cycles, which take place during a main charge or discharge process, are called micro-cycles if their depth of discharge is <2 %. A number of authors have pointed out the relevance of the time resolution to estimate the energy throughput of a battery due to these micro-cycles in applications such as renewable microgrids. However, to the best of our knowledge, there are no experimental studies in the literature that assess the impact of these micro-cycles on battery degradation. In this article, the impact of micro-cycles on the loss of performance of a lithium-ion battery is experimentally studied. The results show that micro-cycles have a negligible, or even positive effect on the aging of lithium-ion cells compared to the aging caused by full cycles. In fact, if charge throughput or equivalent full cycles are used to measure the use of a battery, then cells subjected to micro-cycles exhibit a 50 % extended lifetime compared to cells only subjected to full cycles. More precisely, cells including micro-cycles with depth of discharge of 0.5 % lasted for nearly 3000 equivalent full cycles, whereas cells aged under standard deep cycles lasted for no >1500. Nevertheless, if the number of deep cycles, disregarding micro-cycles, is the unit to measure battery use, then the degradation of cells with and without micro-cycles is similar. Based on this result, the number of cycles can be identified as a more accurate variable to measure the use of a cell, in comparison to charge throughput., This work is part of the projects PID2019-111262RB-I00, funded by MCIN/AEI/10.13039/501100011033/, STARDUST (774094), funded by European Union¿s Horizon 2020 research and innovation programme, HYBPLANT (0011-1411-2022-000039), funded by Government of Navarre, and a Ph.D. scholarship, funded by Public University of Navarre. Open access funding provided by Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Analysis of low power wide area network wireless technologies in smart agriculture for large-scale farm monitoring and tractor communications

  • Klaina, Hicham
  • Picallo Guembe, Imanol
  • Iturri López, Peio
  • Campo-Bescós, Miguel
  • Azpilicueta Fernández de las Heras, Leyre
  • Aghzout, Otman
  • Falcone Lanas, Francisco
In this paper, the assessment of multiple scenario cases for large-scale farm monitoring using Low-Power Wide-Area Network (LPWAN) based near-ground sensor nodes with the interaction of both tractors and farmers are presented. The proposed scenario under analysis considers multiple communication links, namely nodes to infrastructure, nodes to tractor, nodes to farmer, tractor to infrastructure and farmer to infrastructure communications. Moreover, these scenarios are proposed for tractors and agricultural equipment performance improvement and tracking, as well as resources management within the farm field. Different link type configurations are tested in order to consider the impact of ground, spatial distribution as well as infrastructure elements. The results show that LPWAN-based WSNs can provide better performance in terms of coverage and radio link quality results than ZigBee for a non-flat large-scale farm field in both cases of near-ground fixed nodes and moving tractor and farmer. The proposed systems are validated by cloud-based platforms for LoRaWAN, Sigfox and NB-IoT communications, providing flexible and scalable solutions to enable interactive farming applications., This research is supported by the 2017 Predoctoral Research Grant supported by the Xunta de Galicia and the research projects TEC2017-85529-C03-3R and RTI2018-095499-B-C31, funded by Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU, AEI, FEDER, UE), as well as from European Union's Horizon 2020 research and Innovation programme under grant agreement N°774094 (Stardust-Holistic and Integrated Urban Model for Smart Cities).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Smart charging station with photovoltaic and energy storage for supplying electric buses

  • Berrueta Irigoyen, Alberto
  • Astrain Escola, José Javier
  • Puy Pérez de Laborda, Guillermo
  • El Hamzaoui, Ismail
  • Ursúa Rubio, Alfredo
  • Sanchis Gúrpide, Pablo
  • Villadangos Alonso, Jesús
  • Falcone Lanas, Francisco
  • López Martín, Antonio
  • Matías Maestro, Ignacio
A Smart Charging Station (SCS) has been installed in the Public University of Navarre, Spain, in the framework of the H2020 Smart City Lighthouse STARDUST project. The SCS consists of a high-power electric bus charging point (300 kW), a 100 kW photovoltaic system, a 84 kWh support energy storage system based on a second-life lithiumion battery, and a monitoring and control system that allows the safe storage and convenient access to operation data. This SCS operates as a Smart Grid, being able to provide the power peaks required by the electric bus charger, reducing and smoothing the power demanded from the distribution grid and increasing the renewable energy self-consumption rate. This contribution presents a novel monitoring and control system, which is a key tool to integrate this SCS in the data infrastructure of a Smart City, as well as an energy management system able to operate the SCS to achieve the above-mentioned technical requirements. The crucial role of the monitoring and control system and the energy management system becomes evident in this work., This work has been supported by the European Union’s H2020 Research and Innovation Program under project STARDUST, grant 774094, and by the Government of Navarre under project “Design and installation of renewable-based industrial microgrid with storage”, granted by Res. 41E/2021.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Monitoring of water freeze-thaw cycle by means of an etched single-mode - multimode - single-mode fiber-optic refractometer

  • Socorro Leránoz, Abián Bentor
  • Aginaga Etxamendi, Concepción Isabel
  • Díaz Lucas, Silvia
  • Urrutia Azcona, Aitor
  • Del Villar, Ignacio
  • Matías Maestro, Ignacio
As an alternative to the different technologies that permit the detection of in-situ ice formation on different surfaces, this contribution proposes the design of an etched single-mode – multimode – single-mode (E-SMS) fiber-optic-based structure as a multimode interference refractometer. This sensor provides enhanced properties with respect to a basic SMS structure, including a higher sensitivity and periodical interferometry bands that can measure surrounding refractive indices with repeatability and robustness. Since ice and water refractive indices are sufficiently different, this structure has been used to detect the freezing - thawing process of water taking place inside a freezer between -20°C and +20°C. Also, this work intends to show a proof of concept of a simple technology that can be applied in different situations, such as in smart cities, avionics, structural health monitoring or even to avoid a cold chain breakage. Inside, novel developments to better understand the working operation of the E-SMS structure are shown, together with a study on how to correlate optical and thermal measurements from a refractive index point of view., This work was supported by the Spanish National Research Agency project with reference PID2019-106231RB-I00. Also, part of the funding was provided by the European Union's Horizon 2020 Research and Innovation Programme (Stardust-Holistic and Integrated Urban Model for Smart Cities) under Grant 774094. (Corresponding author: Abián B. Socorro-Leránoz).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Distributed opportunistic wireless mapping system towards smart city service provision

  • Villadangos Alonso, Jesús
  • Falcone Lanas, Francisco
  • López Martín, Antonio
  • Astrain Escola, José Javier
  • Sanchis Gúrpide, Pablo
  • Matías Maestro, Ignacio
The knowledge of wireless signal distribution within an urban scenario can provide useful information to users as well as to enhance connectivity and device operation or to perform municipal logistics based on crowd density and user mobility patterns. In this work, a distributed wireless mapping system, based on a combination of opportunistic nodes such as smartphones which map geolocated WiFi access point connection and received power levels, and a cloud-based information gathering architecture is described. The proposed system has been tested in the framework of the Smart City platform of the city of Pamplona, providing signal distribution heat maps, which can be used for multiple municipal services., The authors want to thank the European Commission for its financial support through the Holistic and Integrated Urban Model for Smart Cities - STARDUST project (H2020-SCC-2017 Grant agreement ID: 774094), and specifically the local partners involved such as the Pamplona City Council, Mancomunidad de la Comarca de Pamplona (MCP) and National Renewable Energy Centre of Spain (CENER-CIEMAT).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Ammonia gas optical sensor based on lossy mode resonances

  • Armas, Dayron
  • Zubiate Orzanco, Pablo
  • Ruiz Zamarreño, Carlos
  • Matías Maestro, Ignacio
This letter presents the fabrication and characterization of an ammonia (NH 3) gas optical sensor based on lossy mode resonances (LMRs). A chromium (III) oxide (Cr 2 O 3) thin film deposited onto a planar waveguide was used as LMR supporting coating. The obtained LMR shows a maximum attenuation wavelength or resonance wavelength centered at 673 nm. The optical properties of the coating can be modified as a function of the presence and concentration of NH 3 in the external medium. Consequently, the refractive index of the Cr 2 O 3 thin film will change, producing a red-shift of the resonance wavelength. Obtained devices were tested for different concentrations of NH 3 as well as repetitive cycles. Concentrations as low as 10 ppbv of NH 3 were detected at room temperature. Machine learning regression models were used to mitigate the cross-sensitivity of the device under temperature and humidity fluctuations., This work was supported in part by the Spanish Ministry of Science and Innovation under Grant FPI PRE2020-091797, in part by the Spanish Agencia Estatal de Investigacion under Grant PID2022-137437OB-I00, and in part by the European Union's Horizon 2020 Research and Innovation Programme (Stardust-Holistic and Integrated Urban Model for Smart Cities) under Grant 774094.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Lossy mode resonance-based sensors in planar configuration: a review

  • Matías Maestro, Ignacio
  • Del Villar, Ignacio
  • Corres Sanz, Jesús María
Lossy mode resonance (LMR)-based sensors have attracted much interest during the last decade in the domain of optical fiber (OF). Here, it is shown that the progress made in the transfer of this technology to planar waveguides (PWs) with different sensing applications such as environmental sensors and biosensors. In addition, the inherent advantages in terms of robustness, simplicity, and easiness to generate novel complex structures are discussed., This work was supported in part by the Agencia Estatal de Investigación under Grant PID2019-106231RBI00 Research Fund and in part by the STARDUST Project (European Commission) under Grant H2020.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Design and on-field validation of an embedded system for monitoring second-life electric vehicle lithium-ion batteries

  • Castillo Martínez, Diego Hilario
  • Rodríguez Rodríguez, Adolfo Josué
  • Soto Cabria, Adrián
  • Berrueta Irigoyen, Alberto
  • Vargas Requena, David Tomás
  • Matías Maestro, Ignacio
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
  • Rodríguez Rodríguez, Wenceslao Eduardo
In the last few years, the growing demand for electric vehicles (EVs) in the transportation sector has contributed to the increased use of electric rechargeable batteries. At present, lithium-ion (Li-ion) batteries are the most commonly used in electric vehicles. Although once their storage capacity has dropped to below 80¿70% it is no longer possible to use these batteries in EVs, it is feasible to use them in second-life applications as stationary energy storage systems. The purpose of this study is to present an embedded system that allows a Nissan® LEAF Li-ion battery to communicate with an Ingecon® Sun Storage 1Play inverter, for control and monitoring purposes. The prototype was developed using an Arduino® microcontroller and a graphical user interface (GUI) on LabVIEW®. The experimental tests have allowed us to determine the feasibility of using Li-ion battery packs (BPs) coming from the automotive sector with an inverter with no need for a prior disassembly and rebuilding process. Furthermore, this research presents a programming and hardware methodology for the development of the embedded systems focused on second-life electric vehicle Li-ion batteries. One second-life battery pack coming from a Nissan® Leaf and aged under real driving conditions was integrated into a residential microgrid serving as an energy storage system (ESS)., This work was supported by: 1. Spanish State Research Agency: PID2019-111262RBI00/AEI/10.13039/501100011033; 2. Government of Navarra under Research Project: 0011-1411-2022-000039 HYBPLANT; 3. European Union's Horizon 2020 Research and Innovation Programme (Stardust-Holistic and Integrated Urban Model for Smart Cities) under Grant 774094.; 4. To the Autonomous University of Tamaulipas (México) for APC support.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Aggregator to electric vehicle LoRaWAN based communication analysis in vehicle-to-grid systems in smart cities

  • Klaina, Hicham
  • Picallo Guembe, Imanol
  • Iturri López, Peio
  • Astrain Escola, José Javier
  • Azpilicueta Fernández de las Heras, Leyre
  • Falcone Lanas, Francisco
Recently, there has been growing attention to the power grid management due to the increasing concerns on global warming. With the advancement in electric vehicles (EV) industry and the evolution in batteries, EVs become an important contributor to the grid with capability of bidirectional power exchange with the grid. In this context, Vehicle-to-Grid (V2G) systems enable multiple functionalities between EVs and the corresponding aggregator. Thus, reliable, long-range communication capabilities between aggregator and EVs is compulsory. In this paper, wireless channel analysis for aggregator and electrical vehicle communication using Long-Range Wide Area Network (LoRaWAN) technology in V2G is presented, in order to test a low-cost solution with large coverage and reduced power consumption profile. Wireless channel and system-level measurements have been performed in a real urban scenario between EV's charging station in Pamplona (Spain) and a vehicle in motion using LoRaWAN 868 MHz devices. Wireless channel characterization is performed by implementing a full 3D urban scenario model, including elements such as buildings, vehicles, users and urban infrastructure such as lamp posts and benches. By means of in-house developed 3D Ray Launching algorithm with hybrid simulation capabilities, estimations of received power levels, signal to noise ratio and time domain parameters have been obtained, for the complete volume of the scenario under test in dense urban conditions. V2G end to end communication has been validated by implementing an intra-vehicle Controller Area Network-BUS (CAN BUS) data gathering system connected to the vehicle LoRaWAN transceiver and subsequently, to a cloud-based web service. The results show that the accurate deterministic based radio channel analysis enables to optimize the network design of LoRaWAN networks in a vehicular environment, considering inter-vehicular and infrastructure links, enabling scalable, low cost end to end data exchange for the deployment of ancillary V2G services., This work was supported in part by the 2017 Predoctoral Research Grant through the Xunta de Galicia and the Research Projects funded by the Ministerio de Ciencia, Innovación y Universidades, Gobierno de España through Ministerio de Ciencia, Innovación y Universidades (MCIU)/Agencia Estatal de Investigación (AEI)/Fondo Europeo de Desarrollo Regional (FEDER)/Unión Europea (UE) under Grant TEC2017-85529-C03-3R and Grant RTI2018-095499-B-C31, and in part by the European Union’s Horizon 2020 Research and Innovation Program (Stardust-Holistic and Integrated Urban Model for Smart Cities) under Grant N◦774094.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Experimental assessment of first- and second-life electric vehicle batteries: performance, capacity dispersion, and aging

  • Braco Sola, Elisa
  • San Martín Biurrun, Idoia
  • Berrueta Irigoyen, Alberto
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
Nowadays, the reuse of electric vehicle batteries is considered to be a feasible alternative to recycling, as it allows them to benefit from their remaining energy capacity and to enlarge their lifetime. Stationary applications, such as self-consumption or off-grid systems support, are examples of second-life (SL) uses for retired batteries. However, reused modules that compose these batteries have heterogeneous properties, which limit their performance. This article aims to assess the influence of degradation in modules from electric vehicles, covering three main aspects: performance, capacity dispersion, and extended SL behavior. First, a complete characterization of new and reused modules is carried out, considering three temperatures and three discharge rates. In the second stage, intra- and intermodule capacity dispersions are evaluated with new and reused samples. Finally, the behavior during SL is also analyzed, through an accelerated cycling test so that the evolution of capacity and dispersion are assessed. Experimental results show that the performance of reused modules is especially undermined at low temperatures and high current rates, as well as in advanced stages of aging. The intramodule dispersion is found to be similar in reused and new samples, while the intermodule differences are nearly four times greater in SL., This work was supported in part by the Spanish State Research Agency (AEI) under Grant PID2019-111262RB-I00/AEI/10.13039/501100011033 and Grant DPI2016-80641-R, in part by the European Union under the H2020 Project STARDUST under Grant 774094, in part by the Government of Navarra under Research Project 0011-1411-2018-000029 GERA, and in part by the Public University of Navarre under Project ReBMS PJUPNA1904.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Tesis doctoral (DoctoralThesis)

Analysis and characterisation of lithium-ion batteries for the integration of renewable energies: modelling, energy management and applications

  • Soto Cabria, Adrián
La necesidad de un cambio en el modelo energético actual hacia un futuro en el que se abogue por la sostenibilidad como pilar indispensable del progreso ha suscitado un cambio en el paradigma energético. Las fuentes de generación basadas en la nociva quema de combustibles fósiles han de ser erradicadas con la mayor celeridad posible. Es en este contexto, en el que las baterías de iones de litio emergen como una solución viable y amigable con el medio ambiente. Las baterías de iones de litio, dada su alta densidad energética, pueden ser empleadas en el sector del transporte como sustitutas a los combustibles fósiles. No obstante, la electricación del sistema automovilístico no conlleva asociada una mejora sustancial si la generación eléctrica sigue proviniendo de sistemas basados en la quema de combustibles fósiles o de la energía nuclear. La principal alternativa estriba en remplazar estas fuentes convencionales por fuentes de origen renovables. No obstante, un sistema basado únicamente en los incontrolables recursos renovables no sería más que una utopía sin un sistema de almacenamiento que los acompañe, como son las baterías de iones de litio. Esta tesis analiza en detalle esta tecnología, y en especial, su aplicación en entornos de generación renovables. Las principales líneas de trabajo son: Análisis del estado actual de la tecnología de baterías de iones de litio; Estudio de las principales técnicas de caracterización no invasivas como herramienta para cuantificar e identificar los mecanismos de degradación en baterías de iones de litio; Modelizado eléctrico de baterías de iones de litio y validación en sistemas reales; Estudio e identificación de aspectos clave en baterías de iones de litio para la integración de energías renovables en la red eléctrica., Gaur egungo energia-eredua aldatzeko beharra dago, jasangarritasuna oinarria izan behar du, horrek energia-paradigma aldatzea ekarri du. Erregai fosilen erreketa kaltegarrian oinarritutako sorkuntza-iturriak ahalik eta azkarren murriztu behar dira. Testuinguru honetan, litiozko ioien bateriak ingurumenarekiko irtenbide bideragarri eta lagunkoi gisa azaleratzen dira. Litioiozko bateriak, energia-dentsitate handia dutenez, garraio-sektorean erabil daitezke erregai fosilen ordez. Hala ere, automobil-sistemaren elektrifikazioak ez dakar berekin funtsezko hobekuntzarik, baldin eta elektrizitatea erregai fosilen erretzean edo energia nuklearrean oinarritutako ohiko sistemetatik badator. Aukera nagusia iturri horiek energia berriztagarriekin ordezkatzea da. Hala eta guztiz ere, iturri berriztagarriak kontrolagaitzak direnez, sistema energetikoa energia berrizagarrietan bakarrik oinarritutakoa utopia bat baino ez litzateke, haiekin batera doan biltegiratze-sistemarik gabe, litio-ioizko bateriekin, adibidez. Tesi honek zehazkiro aztertzen du teknologia hori, eta bereziki, sorkuntza berriztagarriko inguruneetan duen aplikazioa. Hauek dira ikerketa-lerro nagusiak: Litio-ioizko baterien teknologiaren egoeraren azterketa; Karakterizazio ez-inbaditzaileko teknika nagusiak aztertzea, litio-ioizko baterien degradazio-mekanismoak kuantikatzeko eta identikatzeko tresnagisa; Litio-ioizko baterien modelatze elektrikoa eta balidazioa sistema errealetan; Litio-ioizko baterien funtsezko alderdiak aztertu eta identi katzea, energia berriztagarriak sare elektrikoan integratzeko., The need for a change in the current energy model towards a future in which sustainability is advocated as an indispensable pillar of progress has led to a change in the energy paradigm. The hitherto used power sources based on the harmful burning of fossil fuels must be eradicated as quickly as possible. In this context, lithium-ion batteries emerge as a viable and environmentally friendly solution. Lithium-ion batteries, given their high energy density, can be used in the transport sector as substitutes for fossil fuels. However, the electrication of the automotive system does not entail a substantial improvement if the power generation continues to come from conventional systems based on the burning of fossil fuels or nuclear energy. The main alternative is to replace these sources with renewable sources. However, a system based solely on uncontrollable renewable resources would be nothing more than a utopia without a storage system to accompany them, such as lithium-ion batteries. This thesis analyses in detail this technology, and in particular, its application in renewable generation environments. The main lines of work are: Analysis of the current state of lithium-ion battery technology; Study of the main non-invasive characterisation techniques as a tool to quantify and identify the degradation mechanisms on lithium-ion batteries; Electrical modelling of lithium-ion batteries and validation in real systems; Study and identication of key aspects of lithium-ion batteries for the integration of renewable energies into the power grid., This thesis has been subsidised by a Ph.D. Scholarship from the Public University of Navarre. Moreover, it has been partly supported by the Spanish State Research Agency (AEI) and FEDER-UE under grants PID2019-111262RB-I00/AEI/10.13039/501100011033, DPI2016-80641-R and DPI2016-80642-R, by the European Union under the H2020 Project STARDUST under Grant 774094, by the Government of Navarre under the research and development projects PI020 RENEWABLE-STORAGE and 'Integration of renewable energy in the electricity grid by means of advanced energy storage systems','GERA' and by the Public University of Navarre through the research project ReBMS PJUPNA1904., Programa de Doctorado en Tecnologías de las Comunicaciones, Bioingeniería y de las Energías Renovables (RD 99/2011), Bioingeniaritzako eta Komunikazioen eta Energia Berriztagarrien Teknologietako Doktoretza Programa (ED 99/2011)
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Enabling customizable services for multimodal smart mobility with city-platforms

  • Al-Rahamneh, Anas
  • Astrain Escola, José Javier
  • Villadangos Alonso, Jesús
  • Klaina, Hicham
  • Picallo Guembe, Imanol
  • Iturri López, Peio
  • Falcone Lanas, Francisco
In the last decades, the cities' capacity for generating digital information has grown exponentially. In this context, the successful implementation of smart cities' concept depends on the current possibility of handling the significant volumes of sensed data. This is particularly notorious in the case of urban mobility. Researchers in the field of urban planning have shown a great interest in urban mobility problems, proposing different route recommendation services towards making it easier and safer to move around the city. This paper addresses the development of an urban data platform and how to obtain and integrate information from sensors and other data sources to provide aggregated and intelligent views of raw data to support urban mobility. With the aim of evaluating the efficiency of the developed platform, we present an intelligent urban mobility solution, where the context-awareness, user preferences, and environmental factors play a significant role in the process of route planning. Finally, our work provides an experiment to assess different long-range wireless communication technologies to enable its implementation within an urban environment., This work was supported in part by the European Union's Horizon 2020 Research and Innovation Programme (Stardust-Holistic and Integrated Urban Model for Smart Cities) under Grant 774094, in part by the Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (Agencia Estatal de Investigación, Fondo Europeo de Desarrollo Regional-FEDER-, European Union) under Grant RTI2018-095499-B-C31 IoTrain, and in part by the European Commission through the STARDUST Project, and specifically the local partners involved such as the Pamplona City Council, Mancomunidad de la Comarca de Pamplona (MCP), National Renewable Energy Centre of Spain (CENER), Sociedad Ibérica de Construcciones Eléctricas, S. A. (SICE), Asociación Navarra de Informática Municipal (ANIMSA), and Government of Navarre.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

State of health estimation of second-life lithium-ion batteries under real profile operation

  • Braco Sola, Elisa
  • San Martín Biurrun, Idoia
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
  • Stroe, Daniel-Ioan
The economic viability of second-life (SL) Li-ion batteries from electric vehicles (EVs) is still uncertain nowadays. Assessing the internal state of reused cells is key not only at the repurposing stage but also during their SL operation. As an alternative of the traditional capacity tests used to this end, the estimation of State of Health (SOH) allows to reduce the testing time and the need of equipment, thereby reinforcing the economic success of SL batteries. However, the estimation of SOH in real SL operation has been rarely analysed in literature. This contribution aims thus to cover this gap, by focusing on the experimental assessment of SOH estimation in reused modules from Nissan Leaf EVs under two SL scenarios: a residential household with self-consumption and a fast charge station for EVs. By means of partial charge and experimental data from cycling and calendar ageing tests, accuracy and robustness of health indicators is firstly assessed. Then, SOH estimation is carried out using real profiles, covering a SOH range from 91.3 to 31%. Offline assessment led to RMSE values of 0.6% in the residential profile and 0.8% in the fast charge station, with a reduction in testing times of 85% compared to a full capacity test. In order to avoid the interruption of battery operation, online assessment in profiles was also analysed, obtaining RMSE values below 1.3% and 3.6% in the residential and charging station scenarios, respectively. Therefore, the feasibility of SOH estimation in SL profiles is highlighted, as it allows to get accurate results reducing testing times or even without interrupting normal operation., This work is part of the projects PID2019-111262RB-I00, funded by MCIN/AEI, Spain/ 10.13039/501100011033/, STARDUST (774094), funded by European Union’s Horizon 2020 research and innovation programme, HYBPLANT (0011-1411-2022-000039), funded by Government of Navarre, Spain, and a Ph.D. scholarship, also funded by Government of Navarre. Open access funding provided by Universidad Pública de Navarra, Spain .
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Fast capacity and internal resistance estimation method for second-life batteries from electric vehicles

  • Braco Sola, Elisa
  • San Martín Biurrun, Idoia
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
The success of second-life (SL) Li-ion batteries from electric vehicles is still conditioned by their technical and economic viability. The knowledge of the internal parameters of retired batteries at the repurposing stage is key to ensure their adequate operation and to enlarge SL lifetime. However, traditional characterization methods require long testing times and specific equipment, which result in high costs that may jeopardize the economic viability of SL. In the seek of optimizing the repurposing stage, this contribution proposes a novel fast characterization method that allows to estimate capacity and internal resistance at various state of charge for reused cells, modules and battery packs. Three estimation models are proposed. The first of them is based on measurements of AC resistance, the second on DC resistance and the third combines both resistance types. These models are validated in 506 cells, 203 modules and 3 battery packs from different Nissan Leaf vehicles. The results achieved are satisfactory, with mean absolute percentage errors (MAPE) below 2.5% at cell and module level in capacity prediction and lower than 2.4% in resistance estimation. Considering battery pack level, MAPE is below 4.2% and 1.8% in capacity and resistance estimation respectively. With the proposed method, testing times are reduced from more than one day to 2 min per cell, while energy consumption is lowered from 1.4 kWh to 1 Wh. In short, this study contributes to the reduction of repurposing procedures and costs, and ultimately to the success of SL batteries business model., This work is part of the projects PID2019-111262RB-I00, funded by MCIN/AEI, Spain/10.13039/501100011033/, STARDUST (774094), funded by European Union’s Horizon 2020 research and innovation programme, HYBPLANT, Spain (0011-1411-2022-000039), funded by Government of Navarre, Spain, and a Ph.D. scholarship, also funded by Government of Navarre, Spain . Open access funding provided by Universidad Pública de Navarra, Spain .
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Experimental assessment of cycling ageing of lithium-ion second-life batteries from electric vehicles

  • Braco Sola, Elisa
  • San Martín Biurrun, Idoia
  • Berrueta Irigoyen, Alberto
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
The reutilization of batteries from electric vehicles allows to benefit from their remaining energy capacity and to increase their lifespan. The applications considered for the second life of these batteries are less demanding than electric vehicles regarding power and energy density. However, there is still some uncertainty regarding the technical and economic viability of these systems. In this context, the study of the ageing and lifetime of reused batteries is key to contribute to their development. This paper assesses the experimental cycle ageing of lithium-ion modules from different Nissan Leaf through accelerated cycling tests on their second life. The evolution of the internal parameters during ageing and the correlation between them are shown, including the analysis of best fitting curves. In addition, a second-life end-of-life criterion is proposed, based on capacity and internal resistance measurements during cells ageing, which can be applied to real application in order to prevent safety issues. By estimating future values from degradation trends and checking latter measurements, the ageing knee is identified. Results show that the modules operate for at least 2033 equivalent full cycles before reaching their ageing knee. This would mean more than 5 years of operation in a real second-life application, such as a photovoltaic self-consumption installation with daily cycling. Moreover, it is shown that a traditional cell characterisation based on capacity and internal resistance measurements is not enough to predict the durability of a cell during its second life., The authors would like to acknowledge the support of the European Union under the H2020 project STARDUST (774094), the Spanish State Research Agency (AEI) and FEDER–UE under grants DPI2016–80641-R, DPI2016–80642-R, PID2019–111262RB-I00 and PID2019–110956RB-I00, of Government of Navarra through research project 0011–1411–2018–000029 GERA and of Public University of Navarre under project ReBMS PJUPNA1904.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Implementation of an interactive environment with multilevel wireless links for distributed botanical garden in university campus

  • Klaina, Hicham
  • Picallo Guembe, Imanol
  • Iturri López, Peio
  • Astrain Escola, José Javier
  • Falcone Lanas, Francisco
In this contribution, an end to end system to enable user interaction with a distributed botanical university campus garden is designed, implemented and tested. The proposed system employs different wireless links to collect data related to different bio physiological parameters of both the vegetation mass and the surrounding environment. Detailed analysis of these multilevel communication links is performed by using deterministic volumetric wireless channel estimation and considering underground, near ground and over ground radio propagation conditions. An in-house developed technique enables accurate wireless channel characterization for complete campus scenario considering the multiple link types and all its composing elements. Node definition and network topology is thus obtained by wireless channel analysis of over ground, near ground and underground communication for both 868 MHz and 2.4 GHz Wireless Sensor Networks in an inhomogeneous vegetation environment. Connectivity to enable user interaction as well as for telemetry and tele-control purposes within the campus is achieved by combining ZigBee and LoRaWAN transceivers with the corresponding sensor/actuator platforms. Coverage studies have been performed in order to assess communication capabilities in the set of multiple underground/near ground/over ground links, by means of deterministic channel analysis for the complete university campus location. Measurement results in lab environment as well as full system deployment are presented, showing good agreement with deterministic simulations. Moreover, system level tests have been performed over a physical campus cloud, providing adequate quality of experience metrics. The proposed solution is a scalable system that provides real time trees status monitoring by a cloud-based platform, enabling user interaction within a distributed botanical garden environment in the university campus., This work was supported in part by the 2017 Predoctoral Research Grant supported by the Xunta de Galicia and the Research Projects under Grant TEC2017-85529-C03-3R and Grant RTI2018-095499-B-C31, in part by the Ministerio de Ciencia, Innovación y Universidades, Gobierno de España [MCIU/Agencia Estatal de Investigación (AEI)/Fondo Europeo de Desarrollo Regional (FEDER), Unión Europea (UE)], and in part by the European Union’s Horizon 2020 Research and Innovation Program (Stardust-Holistic and Integrated Urban Model for Smart Cities) under Grant 774094., This work was supported in part by the 2017 Predoctoral Research Grant supported by the Xunta de Galicia and the Research Projects under Grant TEC2017-85529-C03-3R and Grant RTI2018-095499-B-C31, in part by the Ministerio de Ciencia, Innovación y Universidades, Gobierno de España [MCIU/Agencia Estatal de Investigación (AEI)/Fondo Europeo de Desarrollo Regional (FEDER), Unión Europea (UE)], and in part by the European Union’s Horizon 2020 Research and Innovation Program (Stardust-Holistic and Integrated Urban Model for Smart Cities) under Grant 774094.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Integration of second-life battery packs for self-consumption applications: analysis of a real experience

  • Soto Cabria, Adrián
  • Berrueta Irigoyen, Alberto
  • Zorrilla, Pablo
  • Iribarren Zabalegui, Álvaro
  • Castillo, Diego H.
  • Rodríguez Rodríguez, Wenceslao Eduardo
  • Rodríguez, Adolfo J.
  • Vargas Requena, David Tomás
  • Matías Maestro, Ignacio
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
This contribution presents a methodology for the integration of Li-ion batteries discarded from electric vehicle into a collective self-consumption installation, showing the technical feasibility of such battery second use. In this regard, the state of charge (SOC) estimation is a relevant issue for the energy management of the second-life battery. Therefore, a SOC estimator is proposed in this contribution and tested in field. Moreover, the revealed costs analysis allows an economic comparison between the integration of a discarded battery pack in a second-life application or a remanufacture of these packs, thereby selecting the most suitable cells to build second-life batteries. This is a crucial issue for companies focused on the development of second-life batteries. The results obtained after testing the second-life battery pack in a real installation make it possible to extol the benefits of including this type of batteries in a self-consumption system, reaching a self-consumption ratio of 69 % and reducing by 36 % the maximum power peak demanded from the grid., This work has been supported by the Spanish State Research Agency (AEI) under grants PID2019-111262RB-I00 /AEI/ 10.13039/501100011033 and DPI2016–80641-R, the European Union under the H2020 project STARDUST (774094), the Government of Navarra through research project 0011–1411–2018–000029 GERA and the Public University of Navarra under project ReBMS PJUPNA1904. Also noteworthy is the support received from the Mexican Program for Strengthening Educational Quality (PFCE) (2017-2021) for the Postgraduate Program Master of Science and -UAT.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

On the characterization of lithium-ion batteries under overtemperature and overcharge conditions: identification of abuse areas and experimental validation

  • Lalinde Sainz, Iñaki
  • Berrueta Irigoyen, Alberto
  • Arza, Joseba
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
Although lithium-ion batteries have gained considerable popularity in renewable energy and electric vehicle applications, their safety still remains a concern under certain voltage, temperature, or state of charge conditions. This can lead to degradation and potential thermal runaway. In order to improve the safety assessment of LIBs based on their operating conditions, it is therefore essential to analyze not only their safe operating area but also their abuse region. This study focuses on the characterization of the abuse region of lithium-ion batteries by proposing a new methodology in which four areas of abuse are identified and experimentally validated using a commercial 3.6 Ah pouch cell. The cell is subjected to overtemperature and overcharge conditions, exploring various states of charge (0 to 200%) and ambient temperatures (25 to 100 °C). The influence of temperature and state of charge on the battery's behavior is thoroughly analyzed to fully characterize the abuse region. Results reveal the limiting temperatures and states of charge that define the boundaries of the abuse areas. By extending the characterization of LIBs behavior beyond the safe operation area with the determination of four areas of abuse, this article contributes to a better understanding of the phenomena and abuse mechanisms produced by overtemperature and overcharge events with an eye to improving battery safety., This work is part of the projects PID2019-111262RB-I00, funded by MCIN/AEI/10.13039/501100011033/, TED2021-132457B-I00, funded by MCIN/AEI/10.13039/501100011033/ and by the European Union “NextGenerationEU/PRTR”, STARDUST, funded by European Union’s Horizon 2020 research and innovation program, HYBPLANT, Spain (0011-1411-2022-000039), funded by Government of Navarre, Spain, and a Ph.D. scholarship (PRE2020-095314), funded by Spanish Ministry of Science and Innovation. Open access funding provided by Universidad Pública de Navarra, Spain.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Experimental characterization and aging analysis of commercial 18650 sodium-ion cells

  • Irujo Izcue, Elisa
  • Berrueta Irigoyen, Alberto
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
Extensive use of lithium-ion batteries and scarcity of lithium are leading to re-emergence of sodium-ion batteries as a promising candidate, side-by-side with LIBs, to cover increasing demand of energy storage systems. Thus, development and commercialization of SIBs have been recently accelerated. Scientific research on first commercialized cells has been published regarding its fundamental parameters, aging and thermal performance. However, SIBs still require experimental study to continue developing and maturing their technology. For that reason, this work presents an electrical characterization and aging analysis of a commercial 1.3 Ah 18650 SIB. Based on experimental results obtained, this contribution reveals energy efficiencies of around 92% and an open circuit voltage with a plateau at a SOC of 35%. Regarding aging, samples full cycled at 0.5C exhibit a capacity loss of 15% after 310 cycles and stored cells age at a speed of 0.01 %/day., This work is part of the projects PID2022-139914OB-I00, funded by MICIU/ AEI/ 10.13039/501100011033/ and by 'ERDF/EU', TED2021-132457BI00, funded by MICIU/AEI/10.13039/501100011033/ and by the European Union 'NextGenerationEU/PRTR', STARDUST (H2020-SCC-2016/17-774094), funded by the European Union's Horizon 2020 research and innovation program, HYBPLANT (0011-1411-2022-000039), funded by the Government of Navarre, Lion2H2 (PJUPNA2023-11380), funded by the Public University of Navarre, and has also been supported by the Public University of Navarra under a Ph.D. scholarship.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Interdigital concept in photonic sensors based on an array of lossy mode resonances

  • Domínguez Rodríguez, Ismel
  • Del Villar, Ignacio
  • Fuentes Lorenzo, Omar
  • Corres Sanz, Jesús María
  • Matías Maestro, Ignacio
Multi-parameter detection is key in the domain of sensors. Here it is demonstrated that an indium tin oxide (ITO) nanocoating can be used to generate multiple lossy mode resonances (LMRs) in the optical spectrum. To achieve this, a nanocoating with a gradient in thickness is generated on the surface of a planar waveguide, permitting broadening of the LMR because the position of an LMR in the optical spectrum is directly related to the nanocoating thickness. The nanocoating with a gradient in thickness contributes multiple LMRs, each one centred at a different wavelength. With a further etching or deposition using a mask, a pattern of deposited and non-deposited regions can be created, resulting in isolation of the LMRs by preventing LMR overlap. This enables tracking of each central wavelength separately, which can be tuned through control of the gradient or nanocoating pattern. The array of LMR-based sensors is a photonics analogue to the interdigital concept in electronics, enabling multiple resonances to be used for multiparameter sensing., The authors would like to acknowledge the partial support to the Spanish Ministry of Economy and Competitiveness TEC2016-79367-C2-2-R and PID2019-106231RB-I00 research fund, the STARDUST project (European Commission) and the pre-doctoral research grants of the Public University of Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Development of energy management strategies for the sizing of a fast charging station for electric buses

  • Ojer Palacios, Iñaki
  • Berrueta Irigoyen, Alberto
  • Pascual Miqueleiz, Julio María
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
The electric vehicle contributes to reduce greenhouse gases emissions and get a greater integration of renewable energy. In this context, the implementation of urban buses implies the development of new grid infrastructures in order to carry out the electricity supply required by the charging stations. In order to optimize the size of these infrastructures and to have more power capacity, this contribution proposes the design and the sizing of a fast charging station with a stationary energy storage system (ESS) installed, to supply the energy of the buses that run on one of the lines of Pamplona (Spain). In this contribution, first, the power demanded by the charging point is measured at the fast charging station located at the Public University of Navarre. Second, three energy management strategies are developed with which to use ESS. Finally, the proposed energy management strategies are simulated with the measured data obtained. The results achieved in this contribution show that with a 40 kWh ESS, the power demanded from the grid can be reduced by a whole 70%, that is, from 250 kW to 74 kW. In addition, the power contracted in the electricity rate is reduced too., The authors would like to acknowledge the support of the European Union under the H2020 project STARDUST (774094), the Spanish State Research Agency (AEI) and FEDER-UE under grants DPI2016-80641-R, DPI2016-80642-R, PID2019-111262RB-I00 and PID2019-110956RB-I00, the Government of Navarra through research project 0011-1411-2018-000029 GERA and the Public University of Navarre under project ReBMS PJUPNA1904.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Tesis doctoral (DoctoralThesis)

Safety characterization and early detection of thermal runaway in lithium-ion batteries, Caracterización de la seguridad y detección temprana del thermal runaway en baterías de iones de litio

  • Lalinde Sainz, Iñaki
En el actual contexto de emergencia climática, la transición energética global avanza de forma decidida hacia un modelo sostenible, en el que las energías renovables lideran la generación de electricidad limpia. No obstante, su naturaleza intermitente y no gestionable plantea importantes retos para su integración masiva en la red eléctrica. En este escenario, los sistemas de almacenamiento de energía se presentan como una solución clave para garantizar la estabilidad y flexibilidad del sistema. Paralelamente, la expansión del vehículo eléctrico ha acelerado el desarrollo y despliegue de las baterías de iones de litio, consolidándolas como la tecnología de almacenamiento predominante tanto en aplicaciones estacionarias como en movilidad. Sin embargo, a pesar de sus numerosas ventajas, la seguridad sigue siendo el principal desafío por resolver. Fallos asociados al fenómeno de thermal runaway pueden provocar la destrucción total de la batería y generar situaciones de peligro, como incendios o explosiones. Estos riesgos representan una barrera crítica para la consolidación definitiva de esta tecnología como una solución de almacenamiento de energía fiable y segura. Esta tesis se centra en el análisis de la seguridad de las baterías de iones de litio, con especial énfasis en la detección temprana del fenómeno de termal runaway. Para ello, las principales líneas de investigación son: . Revisión del estado del arte actual del fenómeno de thermal runaway en las baterías de iones de litio. . Realización de exhaustivas pruebas de abuso de baterías de iones de litio en diversas condiciones de estrés. . Desarrollo de una metodología para la caracterización de la seguridad de baterías de iones de litio, basada en la identificación de las áreas de abuso. . Análisis y evaluación de indicadores clave para la detección temprana del thermal runaway., In the current climate emergency context, the global energy transition is decisively shifting towards a sustainable model, with renewable energy sources leading the way in clean electricity generation. However, their intermittent and unmanageable nature poses major challenges for large-scale grid integration. In this scenario, energy storage systems are essential to ensure grid stability and operational flexibility. At the same time, the rapid expansion of electric vehicles has driven the development and deployment of lithium-ion batteries, establishing them as the leading storage technology in both stationary and mobility applications. However, despite their many advantages, safety remains the main challenge to be addressed. Failures associated with the thermal runaway phenomenon can result in the complete destruction of the battery and trigger hazardous events such as fires or explosions. These safety concerns constitute a critical barrier to the full consolidation of this technology as a reliable and secure energy storage solution. This thesis focuses on the safety analysis of lithium-ion batteries, with particular emphasis on the early detection of the thermal runaway phenomenon. To this end, the main research lines are: . Review of the current state of the art on thermal runaway phenomenon in lithium-ion batteries. . Execution of comprehensive abuse testing of lithium-ion batteries under various stress conditions. . Development of a methodology for the safety characterization of lithiumion batteries, based on the identification of abuse areas. . Analysis and evaluation of key indicators for the early detection of thermal runaway., This work has been funded by the Public University of Navarre through a doctoral scholarship given by the Spanish Ministry of Science and Innovation (PRE2020-095314). The company Ingeteam Power Technology has supported this investigation under contract OTRI 2021 901 108. Moreover, this research is part of the projects PID2022-139914OB-I00, funded by MICIU/AEI/10.13039/501100011033/ and by ERDF/EU, TED2021-132457BI00, funded by MICIU/AEI/10.13039/501100011033/ and by the European Union “NextGenerationEU/PRTR”, STARDUST (H2020-SCC-2016/17-774094), funded by the European Union’s Horizon 2020 research and innovation program, HYBPLANT (0011-1411-2022-000039), funded by the Government of Navarre., Programa de Doctorado en Tecnologías de las Comunicaciones, Bioingeniería y de las Energías Renovables (RD 99/2011), Bioingeniaritzako eta Komunikazioen eta Energia Berriztagarrien Teknologietako Doktoretza Programa Ofiziala (ED 99/2011)
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Radio wave propagation and WSN deployment in complex utility tunnel environments

  • Celaya Echarri, Mikel
  • Azpilicueta Fernández de las Heras, Leyre
  • Iturri López, Peio
  • Picallo Guembe, Imanol
  • Aguirre Gallego, Erik
  • Astrain Escola, José Javier
  • Villadangos Alonso, Jesús
  • Falcone Lanas, Francisco
The significant growth of wireless communications systems in the last years has led to the adoption of a wide range of applications not only for the general public but, also, including utilities and administrative authorities. In this context, the notable expansion of new services for smart cities requires, in some specific cases, the construction of underground tunnels in order to enable the maintenance and operation works of utilities, as well as to reduce the visual impact within the city center. One of the main challenges is that, inherently, underground service tunnels lack coverage from exterior wireless communication systems, which can be potentially dangerous for maintenance personnel working within the tunnels. Accordingly, wireless coverage should be deployed within the underground installation in order to guarantee real-time connectivity for safety maintenance, remote surveillance or monitoring operations. In this work, wireless channel characterization for complex urban tunnel environments was analyzed based on the assessment of LoRaWAN and ZigBee technologies operating at 868 MHz. For that purpose, a real urban utility tunnel was modeled and simulated by means of an in-house three-dimensional ray-launching (3D-RL) code. The utility tunnel scenario is a complex and singular environment in terms of radio wave propagation due to the limited dimensions and metallic elements within it, such as service trays, user pathways or handrails, which were considered in the simulations. The simulated 3D-RL algorithm was calibrated and verified with experimental measurements, after which, the simulation and measurement results showed good agreement. Besides, a complete wireless sensor network (WSN) deployment within the tunnels was presented, providing remote cloud data access applications and services, allowing infrastructure security and safety work conditions. The obtained results provided an adequate radio planning approach for the deployment of wireless systems in complex urban utility scenarios, with optimal coverage and enhanced quality of service., This research was funded in part by the School of Engineering and Sciences at Tecnológico de Monterrey, in part by Project RTI2018-095499-B-C31, funded by Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER, UE) and, in part, by the European Union's Horizon 2020 research and Innovation program under grant agreement N◦774094 (Stardust-Holistic and Integrated Urban Model for Smart Cities).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Experimental evaluation of the safety performance of lithium-ion batteries based on abuse areas

  • Lalinde Sainz, Iñaki
  • Berrueta Irigoyen, Alberto
  • Valera, Juan José
  • Arza, Joseba
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
Safety issues associated with lithium-ion batteries (LIBs) jeopardize their widespread adoption in both stationary applications and electric vehicles. One of the factors that can most affect the safety of a LIB is its chemistry. For this reason, this article aims to evaluate the safety of the two main current chemistries, LFP and NMC. In particular, the safety of both technologies is examined from the perspective of the areas of abuse that characterize their behavior beyond the safe operation area. A commercial 5 Ah pouch cell with LFP chemistry is subjected to various overtemperature and overcharge abuses at different conditions. The results obtained for LFP chemistry cell are discussed together with those for NMC cell from a previous work of the authors. Identification of the abuse areas allows for a comparative analysis of the safety of both chemistries, providing a valuable tool for classifying the abuse behavior of LIBs., This work is part of the projects PID2022-139914OB-I00, funded by MICIU/AEI/ 10.13039/501100011033/ and by 'ERDF/EU', TED2021-132457BI00, funded by MICIU/AEI/10.13039/501100011033/ and by the European Union 'NextGenerationEU/PRTR', STARDUST (H2020-SCC-2016/17-774094), funded by the European Union's Horizon 2020 research and innovation program, HYBPLANT (0011-1411-2022-000039), funded by the Government of Navarre, and has also been supported by the Spanish Ministry of Science and Innovation under a Ph.D. scholarship (PRE2020-095314).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Non-invasive aging analysis of lithium-ion batteries in extreme cold temperatures

  • Soto Cabria, Adrián
  • Berrueta Irigoyen, Alberto
  • Oficialdegui, Ignacio
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
This paper presents a non-invasive technical analysis of the degra-dation of four lithium-ion batteries (LIBs) used in extreme frigid weather. In contrast to other studies in which the batteries were tested in laboratory conditions, the LIBs studied in this paper were aged in a real application, more specifically in the WindSled project. In this project, an expedition was made using a zero-emission vehicle drawn by kites, covering more than 2500 kilometers on the East Antarctic Plateau. The study performed in this paper aims to quantify the degradation of the LIBs during the expedition. The results show a 5 % capacity fade, a 30 % increase in the internal resistance and no substantial increase in the impedance of the solid electrolyte interface (SEI). Moreover, no evidence of dendrite growth at the anode is inferred by the interpretation of the distri-bution of relaxation times (DRT), incremental capacity analysis (ICA) and differential voltage analysis (DV). Based on these re-sults, it can be claimed that the LIBs used in the WindSled Project can successfully operate under 50 C. Furthermore, since non-invasive techniques were used to characterize the batteries, they can still be used in upcoming expeditions, with subsequent financial and environmental benefits., This work was supported in part by the Spanish State Research Agency (AEI) under Grant PID2019-111262RB-I00/AEI/10.13039/501100011033, in part by the European Union under the H2020 Project STARDUST under Grant 774094, and in part by the Public University of Navarre through the research project ReBMS PJUPNA1904 and a Ph.D. Scholarship.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Monitoring of electric buses within an urban smart city environment

  • Astrain Escola, José Javier
  • Falcone Lanas, Francisco
  • López Martín, Antonio
  • Sanchis Gúrpide, Pablo
  • Villadangos Alonso, Jesús
A practical experience on monitoring the data generated by electric buses is presented, focusing on energy consumption, charge and state of the batteries. The work is carried out in the framework of a global smart city strategy developed by the H2020 Smart City Lighthouse STARDUST project. The crucial role of the data collection and transmission from electric buses has become evident in this work, so the adopted solutions are covered in detail. A practical electric bus charging station configuration is considered, operating within the city of Pamplona, Spain, with an urban route setting in which electric charging is performed. Various key factors for the practical implementation of the necessary communication infrastructure, including wireless Low Power Wide Area connectivity challenges within the urban scenario settings, based in LoRa/LoRaWAN communication system nodes. The monitoring system architecture is also presented, in which specific machine learning modules in order to collect patterns and visualization of data to enhance planning, operation and maintenance procedures., This work was supported in part by the Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER, UE) under Project Project RTI2018-095499-B-C31, and in part by the European Union’s Horizon 2020 Research and Innovation Programme (StardustHolistic and Integrated Urban Model for Smart Cities) under Grant Nº774094.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Particularised Kalman filter for the state-of-charge estimation of second-life lithium-ion batteries and experimental validation

  • Berrueta, Javier
  • Berrueta Irigoyen, Alberto
  • Soto Cabria, Adrián
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
A critical issue for a proper energy management of a lithium-ion (Li-ion) battery is the estimation of its state-of-charge (SOC). There are various methods available for the SOC estimation, being some of them robust and accurate, but requiring high computational power for its applicability, which is inconvenient for their use with the usual low-cost microcontrollers that build a typical BMS. This contribution proposes an SOC estimation algorithm based on a simplified Kalman Filter, that combines a high accuracy with reduced computational requirements. The proposed simplifications result from a careful analysis of the Li-ion battery performance and linearization of processes that entail negligible loss of accuracy. The proposed algorithm is used to estimate the SOC of a second-life Li-ion battery operating in an experimental PV self-consumption facility. Its performance, in terms of accuracy, robustness and computational requirement, is compared with an Extended Kalman Filter (EKF), a Particle Filter (PF) and other low-performance estimation algorithms, proving its tradeoff between accuracy and computational cost., This work has been supported by the Spanish State Research Agency (AEI) under grant PID2019-111262RB-I00 /AEI/ 10.13039/501100011033, the European Union under the H2020 project STARDUST (774094), the Government of Navarra through research project 0011–1411–2018–000029 GERA and the Public University of Navarra under project ReBMS PJUPNA1904.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Gas sensor based on lossy mode resonances by means of thin graphene oxide films fabricated onto planar coverslips

  • Vitoria Pascual, Ignacio
  • Gallego Martínez, Elieser Ernesto
  • Melendi Espina, Sonia
  • Hernáez Sáenz de Zaitigui, Miguel
  • Ruiz Zamarreño, Carlos
  • Matías Maestro, Ignacio
The use of planar waveguides has recently shown great success in the field of optical sensors based on the Lossy Mode Resonance (LMR) phenomenon. The properties of Graphene Oxide (GO) have been widely exploited in various sectors of science and technology, with promising results for gas sensing applications. This work combines both, the LMR-based sensing technology on planar waveguides and the use of a GO thin film as a sensitive coating, to monitor ethanol, water, and acetone. Experimental results on the fabrication and performance of the sensor are presented. The obtained results showed a sensitivity of 3.1, 2.0, and 0.6 pm/ppm for ethanol, water, and acetone respectively, with a linearity factor R2 > 0.95 in all cases., This work was supported by Agencia Estatal de Investigación (PID2019-106231RB-I00), Institute of Smart Cities and Public University of Navarra PhD Student grants, and in part by the European Union Horizon 2020 Research and Innovation Programme (Stardust-Holistic and Integrated Urban Model for Smart Cities) under Grant 774094. SM-E would like to express her gratitude for the Fellowship supported by the Royal Academy of Engineering under the Leverhulme Trust Research Fellowships scheme (LTRF2021\17130).
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Analysis of low power wide area network wireless technologies in smart agriculture for large-scale farm monitoring and tractor communications

  • Klaina , Hicham
  • Guembe, Imanol Picallo
  • López Iturri, Peio
  • Campo Bescós, Miguel Ángel
  • Azpilicueta, Leyre
  • Aghzout, Otman
  • Vázquez Alejos, Ana Maria
  • Falcone, Francisco
In this paper, the assessment of multiple scenario cases for large-scale farm monitoring using Low-Power Wide-Area Network (LPWAN) based near-ground sensor nodes with the interaction of both tractors and farmers are presented. The proposed scenario under analysis considers multiple communication links, namely nodes to infrastructure, nodes to tractor, nodes to farmer, tractor to infrastructure and farmer to infrastructure communications. Moreover, these scenarios are proposed for tractors and agricultural equipment performance improvement and tracking, as well as resources management within the farm field. Different link type configurations are tested in order to consider the impact of ground, spatial distribution as well as infrastructure elements. The results show that LPWAN-based WSNs can provide better performance in terms of coverage and radio link quality results than ZigBee for a non-flat large-scale farm field in both cases of near-ground fixed nodes and moving tractor and farmer. The proposed systems are validated by cloud-based platforms for LoRaWAN, Sigfox and NB-IoT communications, providing flexible and scalable solutions to enable interactive farming applications., Agencia Estatal de Investigación | Ref. TEC2017-85529-C03-3R, Agencia Estatal de Investigación | Ref. RTI2018-095499-B-C31