Skip to main content

HIBRIDACION DE TECNOLOGIAS AVANZADAS DE ALMACENAMIENTO ELECTRICO PARA SISTEMAS BASADOS EN ENERGIAS RENOVABLES

DPI2016-80642-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2016
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD PUBLICA DE NAVARRA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 25
Encontrada(s) 1 página(s)

Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Identification of critical parameters for the design of energy management algorithms for Li-ion batteries operating in PV power plants

  • Berrueta Irigoyen, Alberto
  • Soto Cabria, Adrián
  • Marcos Álvarez, Javier
  • Parra Laita, Íñigo de la
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
Lithium-ion batteries are gaining importance for a variety of applications due to their price decrease and characteristics improvement. For a proper use of such storage systems, an energy management algorithm (EMA) is required. A number of EMAs, with various characteristics, have been published recently, given the diverse nature of battery problems. The EMA of deterministic battery problems is usually based on an optimization algorithm. The selection of such an algorithm depends on a few problem characteristics, which need to be identified and closely analyzed. The aim of this article is to identify the critical optimization problem parameters that determine the most suitable EMA for a Li-ion battery. With this purpose, the starting point is a detailed model of a Li-ion battery. Three EMAs based on the algorithms used to face deterministic problems, namely dynamic, linear, and quadratic programming, are designed to optimize the energy dispatch of such a battery. Using real irradiation and power price data, the results of these EMAs are compared for various case studies. Given that none of the EMAs achieves the best results for all analyzed cases, the problem parameters that determine the most suitable algorithm are identified to be four, i.e., desired computation intensity, characteristics of the battery aging model, battery energy and power capabilities, and the number of optimization variables, which are determined by the number of energy storage systems, the length of the optimization problem, and the desired time step., This work was supported in part by the European Union under the H2020 Project STARDUST under Grant 774094, in part by the Spanish State Research Agency and FEDER-UE under Grants DPI2016-80641-R, DPI2016-80642-R, PID2019-111262RB-I00, and PID2019-110956RB-I00, in part by the Government of Navarra through Research Project 0011-1411-2018-000029 GERA, and in part by the Public University of Navarre under Project ReBMS PJUPNA1904.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Tesis doctoral (DoctoralThesis)

Energy storage systems based on lithium-ion batteries and supercapacitors: characterization, modelling and integration with renewable energies

  • Berrueta Irigoyen, Alberto
Los inconvenientes medioambientales, sociales y económicos que presentan los combustibles fósiles y nucleares están propiciando un uso cada vez mayor de fuentes de energía renovables. El fuerte desarrollo tecnológico de los sistemas de generación basados en estas fuentes de energía, especialmente de los sistemas eólicos y fotovoltaicos, ha abaratado enormemente sus costes de producción, resultando ya tecnologías competitivas en relación con las plantas convencionales. Actualmente, el principal obstáculo que limita su integración masiva en la red eléctrica es su gestionabilidad, dada la naturaleza intermitente del recurso renovable. Los sistemas de almacenamiento energético distribuidos, y en particular las baterías de litio y los supercondensadores, surgen como una de las mejores alternativas para mejorar la gestión de esta energía y facilitar la operación de una red el ectrica cada vez más basada en sistemas renovables. Esta tesis analiza en profundidad ambas tecnologías de almacenamiento, especialmente cuando funcionan en entornos de generación renovable. Las principales líneas de trabajo de la tesis son: Análisis del estado actual de las tecnologías; Estudio de la influencia de los fenómenos termodinámicos, electroquímicos y térmicos en el funcionamiento de estos sistemas de almacenamiento; Modelado electroquímico y térmico de ambas tecnologías de almacenamiento; Estimación del estado de carga y del envejecimiento en baterías de litio; Validación experimental de los modelos propuestos ante diferentes condiciones de funcionamiento; Desarrollo de metodologías para el diseño y funcionamiento óptimo de sistemas de almacenamiento basados en baterías de litio en entornos renovables y particularización para centrales fotovoltaicas., Environmental, social and economic drawbacks of fossil and nuclear fuels are leading to an increased use of renewable energy sources. The strong technological development of renewable-based generation systems during the last years, especially in the case of wind and photovoltaic systems, has led to an impressive reduction of production costs and made these technologies competitive with conventional power plants. At present, the main barrier that limits their massive integration into the electrical grid is their reduced manageability due to the intermittent nature of renewable resources. Distributed energy storage systems, particularly lithium-ion batteries and supercapacitors, arise as one of the best options to provide manageability to these systems and help operate an electrical grid increasingly based and dependent on renewable power plants. This thesis analyses in depth both energy storage technologies, in particular when they operate in renewable generation systems. The main research lines of the thesis are: Analysis of the state of the art of lithium-ion battery and supercapacitor technologies; Study of the infuence of thermodynamic, electrochemical and thermal phenomena on the operation of these storage technologies; Electrochemical and thermal modelling of both technologies; Estimation of the state of charge and ageing of lithium-ion batteries; Experimental validation of the proposed models under different operating conditions; Development of methodologies for the optimal design and operation of storage systems based on lithium-ion batteries in renewable environments, and implementation in photovoltaic power plants., This thesis has been subsidised by the FPU Program of the Spanish Ministry of Education, Culture and Sport with the scholarship FPU 13/00542. Moreover, funding from the Spanish Ministry of Economy, Industry and Competitiveness has been used under the research and development projects DPI2016-80641-R, DPI2016-80642-R and DPI2013-42853-R and from the Government of Navarre under the research and development project "Integration of renewable energy in the electricity grid by means of advance energy storage systems"., Programa de Doctorado en Tecnologías de las Comunicaciones, Bioingeniería y de las Energías Renovables (RD 99/2011), Bioingeniaritzako eta Komunikazioen eta Energia Berriztagarrien Teknologietako Doktoretza Programa (ED 99/2011)
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Control strategy for an integrated photovoltaic-battery system

  • Urtasun Erburu, Andoni
  • Sanchis Gúrpide, Pablo
  • Marroyo Palomo, Luis
In photovoltaic-battery systems, more attention is usually paid to the MPPT control while the battery management is put aside. This paper proposes two control strategies for an integrated PV-battery system, both of them making it possible to perform MPPT or regulate the battery voltage to its maximum value in order to prevent it from overcharging. Simulation results prove the feasibility of both controls., This work was supported by the Spanish State Research Agency (AEI) and FEDER-UE under grants DPI2013-42853-R and DPI2016-80641-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Characterization and capacity dispersion of lithium-ion second-life batteries from electric vehicles

  • Braco Sola, Elisa
  • San Martín Biurrun, Idoia
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
Nowadays, electric vehicle batteries reutilization is considered such as a feasible alternative to recycling, as it allows to benefit from their remaining energy and to enlarge their lifetime. Stationary applications as self-consumption or isolated systems support are examples of possible second life uses for these batteries. However, the modules that compose these batteries have very heterogeneous properties, and therefore condition their performance. This paper aims to characterize and analyze the existing capacity dispersion of Nissan Leaf modules that have reached the end of their lifetime on their original application and of new modules of this Electric Vehicle, in order to establish a comparison between them., The authors would like to acknowledge the support of the Spanish State Research Agency (AEI) and FEDER-UE under grants DPI2016-80641-R and DPI2016-80642-R and of Government of Navarra through research projects PI020 RENEWABLE STORAGE and 0011-1411-2018-000029 GERA.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Influence of renewable power fluctuations on the lifetime prediction of lithium-ion batteries in a microgrid environment

  • Soto Cabria, Adrián
  • Berrueta Irigoyen, Alberto
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
This contribution analyses lifetime estimation errors due to the effect of power fluctuations in lithium-ion batteries connected to microgrids when different time steps are used for the calculations. Usually, not every second data are available or the computational cost is excessively high. Those facts result in the use of larger time steps. However, the increase of the time steps may turn out in too optimistic predictions. Data from a real microgrid make it possible to optimize calculation times while keeping low errors. The results show that when 1 minute time step is set, the computation time is reduced by 14.4 times while the lifetime overstatement is only 3.5-5.2% higher, depending on the aging model., The authors would like to acknowledge the support of the Spanish State Research Agency (AEI) and FEDER--UE under grants DPI2016-80641-R and DPI2016-80642-R and of Government of Navarra through research projects PI020 RENEWABLE-STORAGE and 0011-1411-2018-000029 GERA.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Worst expected ramp rates from cloud speed measurements

  • Wang, Guang Chao
  • Bosch, Juan Luis
  • Kurtz, Ben
  • Parra Laita, Íñigo de la
  • Wu, Elynn
Large PV power ramp rates are of concern and sometimes even explicitly restricted by grid operators. Battery energy storage systems can smooth the power output and maintain ramp rates within permissible limits. To enable PV plant and energy storage systems design and planning, a method to estimate the largest expected ramps for a given location is proposed. Because clouds are the dominant source of PV power output variability, an analytical relationship between the worst expected ramp rates, cloud motion vectors, and the geometrical layout of the PV plant is developed. The ability of the proposed method to bracket actual ramp rates is assessed over 8 months under different meteorological conditions, demonstrating an average compliance rate of 96.9% for a 2 min evaluation time window., Juan Luis Bosch has been financed in part by Projects ENE2017-83790-C3-3-R and ENE2014-59454-C3-2-R which were funded by the Ministerio de Ciencia, Innovación y Universidades and Ministerio de Economía y Competitividad, respectively, and co-financed by the European Regional Development Fund. In addition, Iñigo de la Parra has been partially supported by the Spanish State Research Agency (AEI) and FEDER-UE under grants DPI2016-80641-R and DPI2016-80642-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Maximum expected ramp rates using cloud speed sensor measurements

  • Wang, Guang Chao
  • Kurtz, Ben
  • Bosch, Juan Luis
  • Parra Laita, Íñigo de la
  • Kleissl, Jan
Large ramps and ramp rates in photovoltaic (PV) power output are of concern and sometimes even explicitly restricted by grid operators. Battery energy storage systems can smooth the power output and maintain ramp rates within permissible limits. To enable PV plant and energy storage system design and planning, a method to estimate the largest expected ramps for a given location is proposed. Because clouds are the dominant source of PV power output variability, an analytical relationship between the worst expected ramp rate, cloud motion vector, and the geometrical layout of the PV plant is developed. The ability of the proposed method to bracket actual ramp rates is assessed over 10 months under different meteorological conditions, demonstrating an average compliance rate of 98.9% for a 2 min evaluation time window. The largest observed ramp of 29.7% s(-1)is contained with the worst case estimate of 34.3% s(-1). This method provides a convenient yet economical approach to worst-case PV ramp rate modeling and is compatible with solar irradiance measured at coarse temporal resolution., Juan Bosch was financed in part by Project No. PID2019-108953RB-C21, funded by the Ministerio de Ciencia e Innovación and co-financed by the European Regional Development Fund. In addition, Iñigo de la Parra was partially supported by the Spanish State Research Agency (AEI) and FEDER-UE under Grant Nos. DPI2016-80641-R and DPI2016-80642-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

On the requirements of the power converter for second-life lithium-ion batteries

  • Berrueta Irigoyen, Alberto
  • San Martín Biurrun, Idoia
  • Pascual Miqueleiz, Julio María
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
The use of lithium-ion batteries is increasing year after year, especially in the automotive sector. Given the high requirements of electric vehicles, their energy storage systems are discarded when they still have around 70% of its initial capacity. These discarded batteries are being studied as a low-price option for stationary systems, mostly related to renewable energy generation, with lower battery requirements. However, the increasing dispersion of cell capacity detailed in this contribution limits the use of second-life cells if regular battery management systems and power converters. We present in this contribution an experimental comparison of the capacity dispersion between fresh and second-life cells, and detail the relationship between the capacity dispersion and the required BMS functionality. Furthermore, we include the ageing phenomena in the analysis by means of experimental ageing results, given that the capacity dispersion is enlarged as the battery ages. After this, we use this data to quantify advantages and disadvantages of a combined BMS and power converter, based on a multilevel topology, compared to a conventional BMS. The most relevant result, when a 55-cell battery is analysed, is a 65% increase in capacity during its whole second life if the BMS and power converter are combined by means of a multilevel topology. The increased level of complexity required by the combined BMS-power converter architecture is analysed in this contribution, providing a convenient tool for the selection of the most suitable option for each application., The authors would like to acknowledge the support of the Spanish State Research Agency (AEI) and FEDER–UE under grants DPI2016-80641-R and DPI2016-80642-R and of Government of Navarra through research projects PI020 RENEWABLE-STORAGE and 0011-1411-2018-000029 GERA.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Combined dynamic programming and region-elimination technique algorithm for optimal sizing and management of lithium-ion batteries for photovoltaic plants

  • Berrueta Irigoyen, Alberto
  • Heck, Michael
  • Jantsch, Martin
  • Ursúa Rubio, Alfredo
  • Sanchis Gúrpide, Pablo
The unpredictable nature of renewable energies is drawing attention to lithium-ion batteries. In order to make full utilization of these batteries, some research works are focused on the management of existing systems, while others propose sizing techniques based on business models. However, in order to optimise the global system, a comprehensive methodology that considers both battery sizing and management at the same time is needed. This paper proposes a new optimisation algorithm based on a combination of dynamic programming and a region elimination technique that makes it possible to address both problems at the same time. This is of great interest, since the optimal size of the storage system depends on the management strategy and, in turn, the design of this strategy needs to take account of the battery size. The method is applied to a real installation consisting of a 100 kWp rooftop photovoltaic plant and a Li-ion battery system connected to a grid with variable electricity price. Results show that, unlike conventional optimisation methods, the proposed algorithm reaches an optimised energy dispatch plan that leads to a higher net present value. Finally, the tool is used to provide a sensitivity analysis that identifies key informative variables for decision makers, The authors would like to acknowledge the support of the Spanish State Research Agency and FEDER-UE under grants DPI2016-80641-R and DPI2016-80642-R; of Government of Navarra through research project PI038 INTEGRA-RENOVABLES; and the FPU Program of the Spanish Ministry of Education, Culture and Sport (FPU13/00542).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

A comprehensive model for lithium-ion batteries: from the physical principles to an electrical model

  • Berrueta Irigoyen, Alberto
  • Urtasun Erburu, Andoni
  • Ursúa Rubio, Alfredo
  • Sanchis Gúrpide, Pablo
The growing interest in e-mobility and the increasing installation of renewable energy-based systems are leading to rapid improvements in lithium-ion batteries. In this context, battery manufacturers and engineers require advanced models in order to study battery performance accurately. A number of Li-ion battery models are based on the representation of physical phenomena by electrochemical equations. Although providing detailed physics-based information, these models cannot take into account all the phenomena for a whole battery, given the high complexity of the equations. Other models are based on equivalent circuits and are easier to design and use. However, they fail to relate these circuit parameters to physical properties. In order to take the best of both modeling techniques, we propose an equivalent circuit model which keeps a straight correlation between its parameters and the battery electrochemical principles. Consequently, this model has the required simplicity to be used in the simulation of a whole battery, while providing the depth of detail needed to identify physical phenomena. Moreover, due to its high accuracy, it can be used in a wide range of environments, as shown in the experimental validations carried out in the final section of this paper., The authors acknowledge the support of the Spanish State Research Agency (AEI) and FEDER UE under grants DPI2013 42853 R, DPI2016 80641 R and DPI2016 80642 R; of Government of Navarra through research project PI038 INTEGRA-RENOVABLES; and the FPU Program of the Spanish Ministry of Education, Culture and Sport (FPU13/00542).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Critical comparison of energy management algorithms for lithium-ion batteries in renewable power plants

  • Berrueta Irigoyen, Alberto
  • Soto Cabria, Adrián
  • García Solano, Miguel
  • Parra Laita, Íñigo de la
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
Lithium-ion batteries are gaining importance for a variety of applications due to their price decrease and characteristics improvement. A good energy management strategy is required in order to increase the profitability of an energy system using a Li-ion battery for storage. The vast number of management algorithms that has been proposed to optimize the achieved profit, with diverse computational power requirements and using models with different complexity, raise doubts about the suitability of an algorithm and the required computation power for a particular application. The performance of three energy management algorithms based on linear, quadratic, and dynamic programming are compared in this work. A realistic scenario of a medium-sized PV plant with a constraint of peak shaving is used for this comparison. The results achieved by the three algorithms are compared and the grounds of the differences are analyzed. Among the three compared algorithms, the quadratic one seems to be the most suitable for renewableenergy applications, given the undue simplification of the battery aging required by the linear algorithm and the discretization and computational power required by a dynamic algorithm., The authors would like to acknowledge the support of the Spanish State Research Agency (AEI) and FEDER–UE under grants DPI2016-80641-R and DPI2016-80642-R and of Government of Navarra through research projects PI020 RENEWABLE-STORAGE and 0011-1411-2018-000029 GERA.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Ramp-rate control in large PV plants: battery vs. short-term forecast

  • Marcos Álvarez, Javier
  • Parra Laita, Íñigo de la
  • Cirés Buey, Eulalia
  • Wang, Guang Chao
  • García Solano, Miguel
  • Marroyo Palomo, Luis
Incluye póster, The changeability in the power produced by utility-scale PV plants caused by shadows due to passing clouds can compromise grid stability. Traditionally, some kind of energy storage systems (ESS) is proposed as the solution to reduce power variations below the limits imposed by new grid codes regulations. However, recent short-term forecast sources open the door to control the variability without batteries, using only inverter limitation. This option entails some energy curtailment losses that has not been yet addressed. This paper quantifies these losses for the first time using a meaningful database of 5 s one year data for a 38.5 MW PV plant in a perfect forecast scenery. Finally, we compare the economic cost of installing a lithium-ion battery vs. the inverter limitation solution. The results obtained indicate that battery-less strategies must not be neglected for ramp-rate control, since they can be more cost-effective using perfect forecast for any ramp value., This work has been supported by the Spanish State Research Agency (AEI) and FEDER-UE under grants DPI2016-80641-R and DPI2016-80642-R
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Tesis doctoral (DoctoralThesis)

Analysis and characterisation of lithium-ion batteries for the integration of renewable energies: modelling, energy management and applications

  • Soto Cabria, Adrián
La necesidad de un cambio en el modelo energético actual hacia un futuro en el que se abogue por la sostenibilidad como pilar indispensable del progreso ha suscitado un cambio en el paradigma energético. Las fuentes de generación basadas en la nociva quema de combustibles fósiles han de ser erradicadas con la mayor celeridad posible. Es en este contexto, en el que las baterías de iones de litio emergen como una solución viable y amigable con el medio ambiente. Las baterías de iones de litio, dada su alta densidad energética, pueden ser empleadas en el sector del transporte como sustitutas a los combustibles fósiles. No obstante, la electricación del sistema automovilístico no conlleva asociada una mejora sustancial si la generación eléctrica sigue proviniendo de sistemas basados en la quema de combustibles fósiles o de la energía nuclear. La principal alternativa estriba en remplazar estas fuentes convencionales por fuentes de origen renovables. No obstante, un sistema basado únicamente en los incontrolables recursos renovables no sería más que una utopía sin un sistema de almacenamiento que los acompañe, como son las baterías de iones de litio. Esta tesis analiza en detalle esta tecnología, y en especial, su aplicación en entornos de generación renovables. Las principales líneas de trabajo son: Análisis del estado actual de la tecnología de baterías de iones de litio; Estudio de las principales técnicas de caracterización no invasivas como herramienta para cuantificar e identificar los mecanismos de degradación en baterías de iones de litio; Modelizado eléctrico de baterías de iones de litio y validación en sistemas reales; Estudio e identificación de aspectos clave en baterías de iones de litio para la integración de energías renovables en la red eléctrica., Gaur egungo energia-eredua aldatzeko beharra dago, jasangarritasuna oinarria izan behar du, horrek energia-paradigma aldatzea ekarri du. Erregai fosilen erreketa kaltegarrian oinarritutako sorkuntza-iturriak ahalik eta azkarren murriztu behar dira. Testuinguru honetan, litiozko ioien bateriak ingurumenarekiko irtenbide bideragarri eta lagunkoi gisa azaleratzen dira. Litioiozko bateriak, energia-dentsitate handia dutenez, garraio-sektorean erabil daitezke erregai fosilen ordez. Hala ere, automobil-sistemaren elektrifikazioak ez dakar berekin funtsezko hobekuntzarik, baldin eta elektrizitatea erregai fosilen erretzean edo energia nuklearrean oinarritutako ohiko sistemetatik badator. Aukera nagusia iturri horiek energia berriztagarriekin ordezkatzea da. Hala eta guztiz ere, iturri berriztagarriak kontrolagaitzak direnez, sistema energetikoa energia berrizagarrietan bakarrik oinarritutakoa utopia bat baino ez litzateke, haiekin batera doan biltegiratze-sistemarik gabe, litio-ioizko bateriekin, adibidez. Tesi honek zehazkiro aztertzen du teknologia hori, eta bereziki, sorkuntza berriztagarriko inguruneetan duen aplikazioa. Hauek dira ikerketa-lerro nagusiak: Litio-ioizko baterien teknologiaren egoeraren azterketa; Karakterizazio ez-inbaditzaileko teknika nagusiak aztertzea, litio-ioizko baterien degradazio-mekanismoak kuantikatzeko eta identikatzeko tresnagisa; Litio-ioizko baterien modelatze elektrikoa eta balidazioa sistema errealetan; Litio-ioizko baterien funtsezko alderdiak aztertu eta identi katzea, energia berriztagarriak sare elektrikoan integratzeko., The need for a change in the current energy model towards a future in which sustainability is advocated as an indispensable pillar of progress has led to a change in the energy paradigm. The hitherto used power sources based on the harmful burning of fossil fuels must be eradicated as quickly as possible. In this context, lithium-ion batteries emerge as a viable and environmentally friendly solution. Lithium-ion batteries, given their high energy density, can be used in the transport sector as substitutes for fossil fuels. However, the electrication of the automotive system does not entail a substantial improvement if the power generation continues to come from conventional systems based on the burning of fossil fuels or nuclear energy. The main alternative is to replace these sources with renewable sources. However, a system based solely on uncontrollable renewable resources would be nothing more than a utopia without a storage system to accompany them, such as lithium-ion batteries. This thesis analyses in detail this technology, and in particular, its application in renewable generation environments. The main lines of work are: Analysis of the current state of lithium-ion battery technology; Study of the main non-invasive characterisation techniques as a tool to quantify and identify the degradation mechanisms on lithium-ion batteries; Electrical modelling of lithium-ion batteries and validation in real systems; Study and identication of key aspects of lithium-ion batteries for the integration of renewable energies into the power grid., This thesis has been subsidised by a Ph.D. Scholarship from the Public University of Navarre. Moreover, it has been partly supported by the Spanish State Research Agency (AEI) and FEDER-UE under grants PID2019-111262RB-I00/AEI/10.13039/501100011033, DPI2016-80641-R and DPI2016-80642-R, by the European Union under the H2020 Project STARDUST under Grant 774094, by the Government of Navarre under the research and development projects PI020 RENEWABLE-STORAGE and 'Integration of renewable energy in the electricity grid by means of advanced energy storage systems','GERA' and by the Public University of Navarre through the research project ReBMS PJUPNA1904., Programa de Doctorado en Tecnologías de las Comunicaciones, Bioingeniería y de las Energías Renovables (RD 99/2011), Bioingeniaritzako eta Komunikazioen eta Energia Berriztagarrien Teknologietako Doktoretza Programa (ED 99/2011)
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Cloud tomography applied to sky images: a virtual testbed

  • Mejía, Felipe A.
  • Kurtz, Ben
  • Levis, Aviad
  • Parra Laita, Íñigo de la
  • Kleissl, Jan
Two tomographic techniques are applied to two simulated sets of sky images with different cloud fraction. The Algebraic Reconstruction Technique (ART) is applied to optical depth maps from sky images to reconstruct 3-D cloud extinction coefficients without considering multiple scattering effects. Reconstruction accuracy is explored for different products, including surface irradiance and extinction coefficients, and as a function of the number of available sky imagers and setup distance. Increasing the number of imagers improves the accuracy of the 3-D reconstruction: for surface irradiance, the error decreases significantly up to four imagers at which point the improvements become marginal. But using nine imagers gives more robust results in practical situations in which the circumsolar region of images has to be excluded due to poor cloud detection. The ideal distance between imagers was also explored: for a cloud height of 1 km, increasing distance up to 3 km (the domain length) improved the 3-D reconstruction. An iterative reconstruction technique that iteratively updated the source function improved the results of the ART by minimizing the error between input red radiance images and reconstructed red radiance simulations. For the best case of a nine-imager deployment, the ART and iterative method resulted in 53.4% and 33.6% relative mean absolute error for the extinction coefficients, respectively., The authors acknowledge funding from the California Energy Commission EPIC program. Felipe Mejia was supported by the National Science Foundation Graduate Research Fellowship under Grant No. (DGE-1144086). In addition, Íñigo de la Parra has been partially supported by the Spanish State Research Agency (AEI) and FEDER-UE under grants DPI2016-80641-R and DPI2016-80642-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Supercapacitors: electrical characteristics, modelling, applications and future trends

  • Berrueta Irigoyen, Alberto
  • Ursúa Rubio, Alfredo
  • San Martín Biurrun, Idoia
  • Eftekhari, Ali
  • Sanchis Gúrpide, Pablo
Energy storage systems are playing an increasingly important role in a variety of applications, such as electric vehicles or grid-connected systems. In this context, supercapacitors (SCs) are gaining ground due to their high power density, good performance and long maintenance-free lifetime. For this reason, SCs are a hot research topic, and several papers are being published on material engineering, performance characterization, modelling and post-mortem analysis. A compilation of the most important millstones on this topic is essential to keep researchers on related fields updated about new potentials of this technology. This review paper covers recent research aspects and applications of SCs, highlighting the relationship between material properties and electrical characteristics. It begins with an explanation of the energy storage mechanisms and materials used by SCs. Based on these materials, the SCs are classified, their key features are summarised, and their electrochemical characteristics are related to electrical performance. Given the high interest in system modelling and the large number of papers published on this topic, modelling techniques are classified, explained and compared, addressing their strengths and weaknesses, and the experimental techniques used to measure the modelled properties are described. Finally, the market sectors in which SCs are successfully used, as well as their growth expectations are analysed. The analysis presented herein gives account of the expansion that SC market is currently undergoing and identifies the most promising research trends on this field., This work was supported in part by the Spanish State Research Agency (AEI) and FEDER UE under Grant DPI2016-80641-R and Grant DPI2016-80642-R, in part by the Government of Navarre through the Research Project PI020 RENEWABLE-STORAGE, and in part by the FPU Program of the Spanish Ministry of Education, Culture and Sport under Grant FPU13 /00542.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

On the on-site measurement of the degradation rate of crystalline silicon PV modules at plant level

  • Pascual Miqueleiz, Julio María
  • Berrueta Irigoyen, Alberto
  • Marcos Álvarez, Javier
  • García Solano, Miguel
  • Marroyo Palomo, Luis
This paper proposes a method for measuring the degradation rate of crystalline silicon PV modules at plant level in two different ways as a form of verification. As actual levels of degradation rate have been observed to be as low as 0.2%/a, the uncertainties make it difficult to measure this value accurately at plant level. However, despite the low value, it is still important to know the actual degradation rate due to its impact on energy yield. In this paper, two ways of measuring the degradation rate at plant level are proposed. These two methods, with different uncertainty sources, are proposed to be used jointly in order to have a better approach to the real value. Finally, an example of measurement in a 1.78 MW PV plant is presented., This work has been supported by the Spanish State Research Agency (AEI) and FEDER-UE under grants DPI2016-80641-R and DPI2016-80642-R
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Influence of the aging model of lithium-ion batteries on the management of PV self-consumption systems

  • Berrueta Irigoyen, Alberto
  • Pascual Miqueleiz, Julio María
  • San Martín Biurrun, Idoia
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
Lithium-ion batteries are gaining importance for a variety of applications due to their improving characteristics and decreasing price. An accurate knowledge of their aging is required for a successful use of these ESSs. The vast number of models that has been proposed to predict these phenomena raise doubts about the suitability of a model for a particular battery application. The performance of three models published for a Sanyo 18650 cylindrical cell in a self-consumption system are compared in this work. Measured photovoltaic production and home consumption with a sampling frequency of 15 minutes are used for this comparison. The different aging predictions calculated by these three models are analyzed, compared and discussed. These comparison is particularized for two management strategies. The first of them maximizes the self-consumption PV energy, while the second reduces the maximum power peak demanded from the grid., The authors would like to acknowledge the support of the Spanish State Research Agency (AEI) and FEDER-UE under grants DPI2013-42853-R, DPI2016-80641-R and DPI2016-80642-R; of Government of Navarra through research project PI038 INTEGRA-RENOVABLES; and the FPU Program of the Spanish Ministry of Education, Culture and Sport (FPU13/00542).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

On the stability of advanced power electronic converters: the Generalized Bode Criterion

  • Lumbreras Magallón, David
  • Barrios Rípodas, Ernesto
  • Urtasun Erburu, Andoni
  • Ursúa Rubio, Alfredo
  • Marroyo Palomo, Luis
  • Sanchis Gúrpide, Pablo
A key factor in the design of power electronic converters is the development of control systems and, in particular, the determination of their stability. Due to ease of application, the Bode criteria are currently the most commonly used stability criteria, both with regard to its classic version and to the subsequent revisions proposed in the literature. However, as these criteria have a limited range of applicability, on occasions it is necessary to resort to other universally applicable criteria such as the Nyquist criterion. Unlike Bode, the Nyquist criterion can always be applied, although its use considerably complicates the tuning of the controller. This paper proposes a new stability criterion, called Generalized Bode Criterion, which is based on the Nyquist criterion and, therefore, always applicable, but calculated from both the Bode diagram and the 0 Hz phase of the open-loop transfer function, thus making the criterion easy to be applied. This way, the proposed criterion combines the advantages of Nyquist and Bode criteria and provides an interesting and useful tool to help in the controller design process. The validation of the criterion is made on a voltage control loop for a stand-alone PV system through simulation and experimental tests made on a voltage control loop for a stand-alone PV system including a battery, a boost converter, an inverter and an ac load. The tests are also used to show the limitations of the classic Bode criterion and its revisions to correctly determine the stability of complex systems. IEEE, This work was supported in part by the Spanish State Research Agency (AEI) and FEDER-UE underGrant DPI2016-80641-R and Grant DPI2016-80642-R, in part by the Public University of Navarre through a doctoral scholarship, and in part by the Ingeteam Power Technology
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Experimental assessment of cycling ageing of lithium-ion second-life batteries from electric vehicles

  • Braco Sola, Elisa
  • San Martín Biurrun, Idoia
  • Berrueta Irigoyen, Alberto
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
The reutilization of batteries from electric vehicles allows to benefit from their remaining energy capacity and to increase their lifespan. The applications considered for the second life of these batteries are less demanding than electric vehicles regarding power and energy density. However, there is still some uncertainty regarding the technical and economic viability of these systems. In this context, the study of the ageing and lifetime of reused batteries is key to contribute to their development. This paper assesses the experimental cycle ageing of lithium-ion modules from different Nissan Leaf through accelerated cycling tests on their second life. The evolution of the internal parameters during ageing and the correlation between them are shown, including the analysis of best fitting curves. In addition, a second-life end-of-life criterion is proposed, based on capacity and internal resistance measurements during cells ageing, which can be applied to real application in order to prevent safety issues. By estimating future values from degradation trends and checking latter measurements, the ageing knee is identified. Results show that the modules operate for at least 2033 equivalent full cycles before reaching their ageing knee. This would mean more than 5 years of operation in a real second-life application, such as a photovoltaic self-consumption installation with daily cycling. Moreover, it is shown that a traditional cell characterisation based on capacity and internal resistance measurements is not enough to predict the durability of a cell during its second life., The authors would like to acknowledge the support of the European Union under the H2020 project STARDUST (774094), the Spanish State Research Agency (AEI) and FEDER–UE under grants DPI2016–80641-R, DPI2016–80642-R, PID2019–111262RB-I00 and PID2019–110956RB-I00, of Government of Navarra through research project 0011–1411–2018–000029 GERA and of Public University of Navarre under project ReBMS PJUPNA1904.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Analysis of the main battery characterization techniques and experimental comparison of commercial 18650 Li-ion cells

  • Soto Cabria, Adrián
  • Berrueta Irigoyen, Alberto
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
Over the coming years, major growth in the use of Li-ion batteries is expected, both in electric mobility as well as in stationary applications, be it in self-consumption systems and micro grids or in large renewable power generation plants. The proper characterization of lithium-ion cells is of vital importance for the development of precise models that permit the simulation and prediction of their behavior, so as to suitably configure cell groupings for the resulting battery packs, and to properly select the most suitable cells from the extensive manufacturer offer. In this work, an analysis is conducted of the main techniques used in the literature to characterize batteries. Also, an experimental comparative is carried out on 18650 Liion cells from three large global manufacturers, focusing on the primary methodologies used to characterize capacity, internal resistance and open circuit voltage. Finally, the advantages and disadvantages are presented for the methodologies used, based on the experimental results obtained., The authors would like to acknowledge the support of the Spanish State Research Agency (AEI) and FEDER-UE under grants DPI2016-80641-R and DPI2016-80642-R and of Government of Navarra through research projects PI020 RENEWABLE-STORAGE and 0011-1411-2018-000029 GERA.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Economic analysis of residential PV self-consumption systems with Li-ion batteries under different billing scenarios

  • Galilea Gil, Carlos
  • Pascual Miqueleiz, Julio María
  • Berrueta Irigoyen, Alberto
  • Ursúa Rubio, Alfredo
  • Marroyo Palomo, Luis
In this paper, an economic analysis for four houses with a PV self-consumption system with and without Li-ion batteries is carried out. In particular three different ways of sizing PV and batteries are analyzed under three different billing scenarios for the compensation of surplus energy injected into the grid. All methods run under the same energy strategy, which maximizes self-consumption. The three billing scenarios are: (1) no retribution for surplus energy, (2) retribution at pool price (net billing), and (3) monthly net metering. This study shows how fixed costs make these systems just profitable for small systems. Moreover, the results show how the battery cost and lifespan affects the final profitability of the system and what future evolution in these factors is needed for making these systems profitable under different billing methods., Almacenamiento Renovable Avanzado de Litio para Autoconsumo Residencial interconectado (ARALAR) ‒ 0011-1411-2017-000021, Proyecto de I+D Gobierno de Navarra, and Hibridación de tecnologías avanzadas de almacenamiento eléctrico para sistemas basados en energías renovables DPI2016-80642-R (HIBRITAER)
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Methodology for sizing stand-alone hybrid systems: a case study of a traffic control system

  • San Martín Biurrun, Idoia
  • Berrueta Irigoyen, Alberto
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
This paper proposes a methodology for sizing stand-alone hybrid photovoltaic-wind power generation systems. This methodology makes it possible to optimise the overall performance of the stand-alone system components, based on the premise of guaranteeing the power supply throughout the useful life of the installation at a minimum cost. The sizing is performed in two stages. Firstly, the components of the wind and photovoltaic power generation subsystem are obtained and, secondly, the size of the storage subsystem is determined. For the storage subsystem sizing, account is taken of the variation in efficiency according to the operating point and also the deterioration of the subsystem due to aging and, therefore, the loss of available energy during the useful life of the installation. This methodology is applied to a stand-alone traffic control system located on a secondary road in the Autonomous Community of Valencia (Spain). This system comprises wind and photovoltaic power generation components, a lithium battery bank and various traffic management components. Finally, an analysis of the proposed sizing is made. Satisfactory results are obtained, showing how the proposed methodology makes it possible to optimise the sizing of stand-alone systems with regard to the size of its components, cost and operation., This work has been supported by the Spanish State Research Agency (AEI) and FEDER-UE under grant DPI2013-42853-R, DPI2016-80642-R and DPI2016-80641-R; and by the Government of Navarre under project PIO38 INTEGRA-RENOVABLES.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Tesis doctoral (DoctoralThesis)

On the second life of lithium-ion batteries from electric vehicles: characterisation, ageing and applications, Segunda vida para baterías de iones de litio provenientes de vehículos eléctricos: caracterización, envejecimiento y aplicaciones

  • Braco Sola, Elisa
El cambio en nuestro modelo de consumo y producción de energía es cada vez más urgente. Los problemas medioambientales, económicos y sociales relacionados con los combustibles fósiles han motivado la reacción gubernamental y ciudadana en búsqueda de soluciones alternativas. Así, la transición en el sector de la automoción hacia el vehículo eléctrico es ya una realidad. Las baterías de iones de litio son el corazón de los vehículos eléctricos, ya que posibilitan su autonomía y operación de forma similar a sus homólogos de combustión. No obstante, debido al uso, las características internas de estas baterías se degradadas, de tal modo que son retiradas cuando pierden en torno a un 30 % de capacidad energética. En los últimos años, la reutilización de estas baterías ha surgido como alternativa que permite aprovechar la capacidad energética remanente, alargando de este modo su vida útil. Aplicaciones estacionarias, como la integración de energías renovables o servicios de red, son consideradas como escenarios prometedores para estas baterías de segunda vida. Sin embargo, la viabilidad técnica y económica de estos sistemas de almacenamiento es hoy en día incierta. Esta tesis se centra en la viabilidad técnica de baterías de iones de litio de segunda vida provenientes de vehículos eléctricos. El estudio tiene un gran carácter experimental, utilizando para ello baterías reales que ya han finalizado su primera vida. Las principales líneas de trabajo de la tesis son: • Revisión del estado del arte actual de la segunda vida. • Caracterización del estado interno y análisis de la dispersión. • Estudio de la degradación y durabilidad en función del envejecimiento. • Mejora de la evaluación del estado interno, tanto en la etapa de reconfiguración como durante la operación de la segunda vida. • Estudio de la viabilidad técnica de un prototipo reconfigurado con módulosde segunda vida en distintas aplicaciones estacionarias., The transformation of our energy consumption and production model is increasingly urgent. Environmental, economic and social problems associated with fossil fuels have prompted the government and public reaction in the search for alternative solutions. Thus, the transition in the automotive sector towards an electric fleet is already a reality. Lithium-ion batteries are the core of electric vehicles, as they enable autonomy and operation in a similar way to their combustion counterparts. However, the performance features of these batteries degrade due to usage, in such a way that they are retired when their initial energy capacity fades by 30 %. The reuse of electric vehicle batteries has recently emerged as an alternative that allows benefiting from the remaining energy capacity, thus extending their lifetime. Stationary applications, such as the integration of renewable energies or the provision of grid services, are considered promising scenarios for these second-life batteries. Nevertheless, the technical and economic feasibility of these storage systems is currently uncertain. This thesis focuses on the technical feasibility of second-life lithium-ion batteries from electric vehicles. The study has a significant experimental approach, by using real batteries that have already ended their first life. The main work lines of the thesis are: • Revision of the existing state of the art on second-life batteries. • Characterisation of the internal state and analysis of dispersion. • Study of degradation and durability depending on ageing. • Improvement of the internal state assessment, both in the repurposing stage and during the second-life operation. • Study of the technical feasibility of a repurposed prototype with secondlife modules in different stationary applications., This thesis was awarded with public funding from a predoctoral scholarship of the Government of Navarre.; R&D national project, 'Design of optimal energy storage systems based on first and second-life lithium-ion batteries for the integration of renewable energies', DA2VIDA PID2019-111262RB-I00, Spanish Ministry of Economy, Industry and Competitiveness, 2020-2022; R&D national project, 'Hybridisation of advanced electricity storage systems in renewable-sources microgrids', HIBRITAER DPI2016-80642-R, Spanish Ministry of Economy, Industry and Competitiveness, 2016-2020; R&D Navarre Plan, 'Design and experimental validation of BMS for second-life lithium-ion batteries (ReBMS)', PJUPNA1904, Public University of Navarre (UPNA), 2020-2021. R&D Navarre Plan, 'Integration of renewable energy in the electric grid by means of advanced energy storage systems', GERA PI020 0011-1411-2018-000029, Government of Navarre, 2018-2020., Programa de Doctorado en Tecnologías de las Comunicaciones, Bioingeniería y de las Energías Renovables (RD 99/2011), Bioingeniaritzako eta Komunikazioen eta Energia Berriztagarrien Teknologietako Doktoretza Programa (ED 99/2011)
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Development of energy management strategies for the sizing of a fast charging station for electric buses

  • Ojer Palacios, Iñaki
  • Berrueta Irigoyen, Alberto
  • Pascual Miqueleiz, Julio María
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
The electric vehicle contributes to reduce greenhouse gases emissions and get a greater integration of renewable energy. In this context, the implementation of urban buses implies the development of new grid infrastructures in order to carry out the electricity supply required by the charging stations. In order to optimize the size of these infrastructures and to have more power capacity, this contribution proposes the design and the sizing of a fast charging station with a stationary energy storage system (ESS) installed, to supply the energy of the buses that run on one of the lines of Pamplona (Spain). In this contribution, first, the power demanded by the charging point is measured at the fast charging station located at the Public University of Navarre. Second, three energy management strategies are developed with which to use ESS. Finally, the proposed energy management strategies are simulated with the measured data obtained. The results achieved in this contribution show that with a 40 kWh ESS, the power demanded from the grid can be reduced by a whole 70%, that is, from 250 kW to 74 kW. In addition, the power contracted in the electricity rate is reduced too., The authors would like to acknowledge the support of the European Union under the H2020 project STARDUST (774094), the Spanish State Research Agency (AEI) and FEDER-UE under grants DPI2016-80641-R, DPI2016-80642-R, PID2019-111262RB-I00 and PID2019-110956RB-I00, the Government of Navarra through research project 0011-1411-2018-000029 GERA and the Public University of Navarre under project ReBMS PJUPNA1904.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

On the technical reliability of lithium-ion batteries in a zero emission polar expedition

  • Soto Cabria, Adrián
  • Berrueta Irigoyen, Alberto
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
  • Oficialdegui, Ignacio
This contribution presents a technical analysis of the Lithium-ion batteries (LIBs) used in the WindSled project. In this project, an expedition has been carried out by means of a 0-emission vehicle that have covered more than 2500 kilometers in Antarctica Eastern Plateau pulled by kites. This adventure allowed the performance of 10 scientific experiments with a minimal disturbance of the polar environment. The required electricity for the survival and the scientific experimentation was delivered by flexible PV panels installed on the sled and commercial LIBs. The study performed in this contribution aims at the quantification of the LIBs degradation after the expedition. The results show a capacity fade of 5 % and an internal resistance increase of 30 %. Based on these results, it can be claimed that the LIBs used in the WindSled Project can successfully operate under -40°C. Moreover, these batteries can be used in upcoming expeditions, entailing an improvement from an economical and environmental point of view compared to primary batteries., Spanish State Research Agency (AEI) and FEDER-UE under grants DPI2016-80641-R, DPI2016-80642-R, PID2019-111262RB-I00 and PID2019-110956RB-I00, the Government of Navarra through research project 0011-1411-2018- 000029 GERA and the Public University of Navarre under project ReBMS PJUPNA1904.