Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Injection-induced poroelastic controls on the transient process of dynamic fault rupture in geo-energy engineering

  • Wu, Haiqing
  • Parisio, Francesco
  • Vilarrasa, Víctor
Managing fluid-induced seismicity is one of the most crucial challenges in geo-energy engineering. A seismic event usually starts from initial fault slip, followed by a nucleation process, and finally propagates to dynamic rupture. Fault stability analysis based on the elastostatic Mohr-Coulomb failure criterion is limited to assess fault slip initiation only. In contrast, the interfacial slip model of cracks is well suited to describe the nucleation process and the initiation of dynamic rupture in addition to the initial slip. Moreover, it provides an opportunity to identify the distinguished slip regimes of dynamic fault rupture under various geomechanical conditions compared with other fully numerical approaches. Yet, existing studies following this model have not accounted for injection-induced poroelastic effects on the nucleation process and slip regimes. Here, we incorporate a well-established analytical solution of poroelastic stress instead of numerical reservoir tools into the interfacial slip model to simulate the earthquake nucleation process and slip regimes due to injecting fluid into a fault zone. Results highlight that the developed model is capable of capturing the failure transition from initial slip to dynamic rupture propagation. Including injection-induced poroelastic stress variations significantly impacts the specific evolution of crack growth, disclosing the poroelasticity-dominated nucleation in addition to that dominated by slip-weakening mechanism, which brings to light a wider range of slip regimes in nucleation process. Poroelasticity can stabilize faults by delaying the initiation of fault slip and its ultimate nucleation, which are beneficial for managing induced seismicity. However, it also leads to a potential risk of inducing damaging earthquakes, owing to the issue of long run-out distance, under certain conditions. These findings arise from a physics-based model and provide a better understanding of the transient rupture process, contributing to developing managing and forecasting tools of induced seismicity., H.W. would like to acknowledge the financial support received from the Secretariat for Universities and Research of the Ministry of Business and Knowledge of the Government of Catalonia (AGAUR) and the European Social Fund (FI-2019). H.W. also acknowledges the Becas Santander Research Scholarship from the Technical University of Catalonia (UPC) and the Santander. V.V. acknowledges funding from the European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation Program through the Starting Grant GEoREST (www.georest.eu) under Grant agreement No. 801809 and under Horizon Europe through the Proof of Concept NOSHAKE under Grant Agreement No. 101248689. IMEDEA is an accredited “Maria de Maeztu Excellence Unit” (Grant CEX2021-001198, funded by MCIN/AEI/10.13039/501100011033)., With funding from the Spanish government through the "Maria de Maeztu Centre of Excellence" accreditation (CEX2021-001198)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Analytical modeling of injection-induced fault reactivation potential in poroelastically anisotropic rock masses

  • Li, Yitao
  • Song, Fei
  • Chen, Xingwei
  • Shi, Zhenming
  • Vilarrasa, Víctor
  • Li, Bo
Reliable analytical models can serve as robust tools for assessing injection-induced seismicity. Existing analytical models are largely restricted to isotropic reservoirs and therefore do not capture the poroelastic anisotropy typical of layered sedimentary formations. Here, we derive a closed-form analytical solution for injection-induced poroelastic fields in a transversely isotropic reservoir intersected by a displaced fault, based on Eshelby's inclusion theory and orthotropic Green's functions. The solution recovers existing isotropic solutions as limiting cases and agrees well with finite-element simulations. Parametric and lithology-based analyses show that within the investigated parameter ranges and representative lithologies, elastic anisotropy has a comparatively limited influence on the predicted reactivation response, whereas the directional Biot's coefficients exert a stronger control on fault reactivation potential and pre-slip length. Their influence is also geometry dependent, with the vertical Biot's coefficient being more important for gently dipping faults and the horizontal Biot's coefficient being more important for steeply dipping faults. Comparative analysis of the five representative lithologies further shows that the clay-rich cases examined here exhibit higher fault-reactivation potential, owing to the combined effects of strong poroelastic effect and relatively low frictional resistance. These results collectively indicate that neglecting poroelastic anisotropy may lead to underestimation of the predicted fault-reactivation potential, particularly for mechanically weak, clay-rich parameter sets under the conditions considered here. This analytical solution provides a rapid and physically transparent tool for first-order assessment of fault reactivation in injection-related subsurface operations., The authors acknowledge the financial support from the National Key Research and Development Program of China (grant number: 2022YFC3803000), National Natural Science Foundation of China (grant number: 12302099) and the Fundamental Research Funds for the Central Universities (grant number: 22120230037). V.V. acknowledges funding from the European Research Council (ERC) under the European Union's Horizon Europe Research and Innovation Program through the Proof of Concept NOSHAKE under Grant agreement No. 101248689., Peer reviewed