Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Injection-induced poroelastic controls on the transient process of dynamic fault rupture in geo-energy engineering

  • Wu, Haiqing
  • Parisio, Francesco
  • Vilarrasa, Víctor
Managing fluid-induced seismicity is one of the most crucial challenges in geo-energy engineering. A seismic event usually starts from initial fault slip, followed by a nucleation process, and finally propagates to dynamic rupture. Fault stability analysis based on the elastostatic Mohr-Coulomb failure criterion is limited to assess fault slip initiation only. In contrast, the interfacial slip model of cracks is well suited to describe the nucleation process and the initiation of dynamic rupture in addition to the initial slip. Moreover, it provides an opportunity to identify the distinguished slip regimes of dynamic fault rupture under various geomechanical conditions compared with other fully numerical approaches. Yet, existing studies following this model have not accounted for injection-induced poroelastic effects on the nucleation process and slip regimes. Here, we incorporate a well-established analytical solution of poroelastic stress instead of numerical reservoir tools into the interfacial slip model to simulate the earthquake nucleation process and slip regimes due to injecting fluid into a fault zone. Results highlight that the developed model is capable of capturing the failure transition from initial slip to dynamic rupture propagation. Including injection-induced poroelastic stress variations significantly impacts the specific evolution of crack growth, disclosing the poroelasticity-dominated nucleation in addition to that dominated by slip-weakening mechanism, which brings to light a wider range of slip regimes in nucleation process. Poroelasticity can stabilize faults by delaying the initiation of fault slip and its ultimate nucleation, which are beneficial for managing induced seismicity. However, it also leads to a potential risk of inducing damaging earthquakes, owing to the issue of long run-out distance, under certain conditions. These findings arise from a physics-based model and provide a better understanding of the transient rupture process, contributing to developing managing and forecasting tools of induced seismicity., H.W. would like to acknowledge the financial support received from the Secretariat for Universities and Research of the Ministry of Business and Knowledge of the Government of Catalonia (AGAUR) and the European Social Fund (FI-2019). H.W. also acknowledges the Becas Santander Research Scholarship from the Technical University of Catalonia (UPC) and the Santander. V.V. acknowledges funding from the European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation Program through the Starting Grant GEoREST (www.georest.eu) under Grant agreement No. 801809 and under Horizon Europe through the Proof of Concept NOSHAKE under Grant Agreement No. 101248689. IMEDEA is an accredited “Maria de Maeztu Excellence Unit” (Grant CEX2021-001198, funded by MCIN/AEI/10.13039/501100011033)., With funding from the Spanish government through the "Maria de Maeztu Centre of Excellence" accreditation (CEX2021-001198)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Analytical modeling of injection-induced fault reactivation potential in poroelastically anisotropic rock masses

  • Li, Yitao
  • Song, Fei
  • Chen, Xingwei
  • Shi, Zhenming
  • Vilarrasa, Víctor
  • Li, Bo
Reliable analytical models can serve as robust tools for assessing injection-induced seismicity. Existing analytical models are largely restricted to isotropic reservoirs and therefore do not capture the poroelastic anisotropy typical of layered sedimentary formations. Here, we derive a closed-form analytical solution for injection-induced poroelastic fields in a transversely isotropic reservoir intersected by a displaced fault, based on Eshelby's inclusion theory and orthotropic Green's functions. The solution recovers existing isotropic solutions as limiting cases and agrees well with finite-element simulations. Parametric and lithology-based analyses show that within the investigated parameter ranges and representative lithologies, elastic anisotropy has a comparatively limited influence on the predicted reactivation response, whereas the directional Biot's coefficients exert a stronger control on fault reactivation potential and pre-slip length. Their influence is also geometry dependent, with the vertical Biot's coefficient being more important for gently dipping faults and the horizontal Biot's coefficient being more important for steeply dipping faults. Comparative analysis of the five representative lithologies further shows that the clay-rich cases examined here exhibit higher fault-reactivation potential, owing to the combined effects of strong poroelastic effect and relatively low frictional resistance. These results collectively indicate that neglecting poroelastic anisotropy may lead to underestimation of the predicted fault-reactivation potential, particularly for mechanically weak, clay-rich parameter sets under the conditions considered here. This analytical solution provides a rapid and physically transparent tool for first-order assessment of fault reactivation in injection-related subsurface operations., The authors acknowledge the financial support from the National Key Research and Development Program of China (grant number: 2022YFC3803000), National Natural Science Foundation of China (grant number: 12302099) and the Fundamental Research Funds for the Central Universities (grant number: 22120230037). V.V. acknowledges funding from the European Research Council (ERC) under the European Union's Horizon Europe Research and Innovation Program through the Proof of Concept NOSHAKE under Grant agreement No. 101248689., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Dataset, code, and figure outputs for “What controls maximum injection-induced earthquake magnitude?”

  • Sachdeva, Sanchit
  • Kivi, Iman Rahimzadeh
  • Mukuhira, Yusuke
  • Vilarrasa, Víctor
[Description of methods used for collection or generation of data] Selected variables from the open-access GEoREST database were characterized, and rock names were standardized into 12 categories. Missing values were filled using literature values, deterministic calculations, and random-forest regression. Moment_Max was neither imputed nor used for imputation. Two LightGBM models were compared: an injection-only model and a full 12-feature model. Data were divided into 90% training and 10% testing subsets. Predictors were normalized from 0 to 1 using training-set ranges only., [Description of data processing and preparation] 1. Select and filter the GEoREST variables. 2. Fill supported literature values. 3. Calculate deterministic elastic and stress properties. 4. Impute remaining eligible values using random forests. 5. Merge the completed data and train the LightGBM models. Excel colours show provenance: white = original, yellow = literature, orange = random forest, and green = deterministic. Full processing details are provided in the scripts., [Codebooks or data dictionaries] This README documents the final variables. The original GEoREST workbook and Kivi et al. (2023) provide the source-variable definitions., Fluid injection into the subsurface for energy and resource development has led to increased seismic activity in recent years. Understanding the key factors governing maximum induced earthquake magnitude remains critical for their improved prediction and risk assessment. In this study, we apply a machine-learning model using the LightGBM algorithm to a global induced seismicity database spanning multiple geoenergy applications and settings to identify major factors associated with maximum injection-induced moment magnitude. We find that incorporating operational parameters, site characteristics, and host rock properties as input variables, compared to only operational parameters, significantly increases the predictive model accuracy. Cumulative injected fluid volume and injection rate impose first-order controls on seismic magnitude, while rock porosity, permeability, pore pressure, and in-situ stress field are found to play important secondary roles. These results highlight the importance of physical site characteristics beyond injection parameters in enriching magnitude-scaling relations and developing more reliable, physics-based seismicity forecasting and risk mitigation strategies., - The authors acknowledge support for data collection from the European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation Program through the starting grant GEoREST under grant agreement no. 801809. - S.S. and V.V. acknowledge funding from the European Research Council through the Horizon Europe Proof-of-Concept project NOSHAKE, Grant Agreement No. 101248689. - I.R.K. acknowledges funding from MICIU/AEI/10.13039/501100011033 and the European Social Fund Plus (FSE+) through the Ramón y Cajal fellowship RYC2024-048711-I. - IMEDEA is a María de Maeztu Excellence Unit supported by Grant CEX2021-001198, funded by MICIU/AEI/10.13039/501100011033., With funding from the Spanish government through the "Maria de Maeztu Centre of Excellence" accreditation (CEX2021-001198)., File list Main files - README.md: workflow guide. - README_DATASETS.txt: dataset metadata. - requirements.txt: Python dependencies. - rf_script.py: random-forest imputation. - principal_stress_rf_script.py: principal-stress imputation. - final_dataset_script.py: final data merge and deterministic recalculation. - lightgbm_base_script.py: baseline LightGBM workflow. - lightgbm_normalization_script.py: normalized LightGBM workflow and figures. 01_Data_Curation - GEoREST_induced_seismicity_database_v20.11.2022.xlsx/.csv: source dataset. - DataCuration.xlsx: selected, standardized, literature-filled, and deterministic data. - Literature/RockProperties_4.png to RockProperties_8.png: literature tables used for filling rock properties. 02_RF_Imputation - RF_Datacurated.xlsx: random-forest-imputed data. - Audit_Outputs/principal_stress_values.csv: imputed principal stresses. - Audit_Outputs/principal_stress_validation.csv: stress-imputation validation. 03_Model_Training - Final_Imputed_Dataset.xlsx/.csv: final model input. - Previous_Baseline/Mean_RockSiteInjection.xlsx: earlier comparison dataset. - Results/model_comparison.csv: model-performance summary. - Results/new_v2_all_row_predictions.csv: model predictions. - Results/normalization_ranges.csv: training-set normalization ranges. - Results/normalized_labelled_model_inputs.csv: normalized model inputs. - Results/comparison_report.json: model settings and validation report. - Results/LightGBM_V2_TestV1_model.txt: trained LightGBM model. - Figures/F10.png, F21.jpg, F31.png, and F32.png: manuscript figures., Peer reviewed