Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Functional dependence of resonant harmonics on nanomechanical parameters in dynamic mode atomic force microscopy

  • Gramazio, Federico
  • Lorenzoni, Matteo|||0000-0001-5287-8761
  • Pérez-Murano, Francesc
  • Rull Trinidad, Enrique
  • Staufer, Urs
  • Fraxedas, Jordi|||0000-0002-2821-4831
We present a combined theoretical and experimental study of the dependence of resonant higher harmonics of rectangular cantilevers of an atomic force microscope (AFM) as a function of relevant parameters such as the cantilever force constant, tip radius and free oscillation amplitude as well as the stiffness of the sample's surface. The simulations reveal a universal functional dependence of the amplitude of the 6th harmonic (in resonance with the 2nd flexural mode) on these parameters, which can be expressed in terms of a gun-shaped function. This analytical expression can be regarded as a practical tool for extracting qualitative information from AFM measurements and it can be extended to any resonant harmonics. The experiments confirm the predicted dependence in the explored 3-45 N/m force constant range and 2-345 GPa sample's stiffness range. For force constants around 25 N/m, the amplitude of the 6th harmonic exhibits the largest sensitivity for ultrasharp tips (tip radius below 10 nm) and polymers (Young's modulus below 20 GPa).
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A statistical analysis of nanocavities replication applied to injection moulding

  • Pina Estany, Jordi
  • Colominas, Carles
  • Fraxedas, Jordi|||0000-0002-2821-4831
  • Llobet Sixto, Jordi|||0000-0001-7007-9277
  • Pérez Murano, Francesc|||0000-0002-4647-8558
  • Puigoriol-Forcada, Josep Maria
  • Ruso, D.
  • García Granada, Andrés
The purpose of this paper is to investigate both theoretically and experimentally how nanocavities are replicated in the injection moulding manufacturing process. The objective is to obtain a methodology for efficiently replicate nanocavities. From the theoretical point of view, simulations are carried out using a submodeling approach combining Solidworks Plastics for a first macrosimulation and Fluent solver for a subsequent nanosimulation. The effect of the four main factors (melt temperature, mould temperature, filling time and cavity geometry) are quantified using an statistical 2 factorial experiment. It is found that the main effects are the cavity length, the mould temperature and the polymer temperature, with standardized effects of 5, 3 and 2.6, respectively. Filling time has a negative 1.3 standardized effect. From the experimental point of view, Focused Ion Beam technique is used for mechanizing nanocavities in a steel mould. The replication achieved in polycarbonate injection is quantified using an Atomic Force Microscope. It is observed how both the geometry and the position of the cavities in the mould affect its replication.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Replication of nanoscale surface gratings via injection molding

  • Muntada López, Olga
  • Pina Estany, Jordi
  • Colominas, Carles
  • Fraxedas, Jordi|||0000-0002-2821-4831
  • Pérez Murano, Francesc|||0000-0002-4647-8558
  • García Granada, Andrés
Nanostructured gratings fabricated on silicon chips have been successfully transferred to polypropylene plastic parts by means of injection molding. Different sets of experiments were carried out along with a repeatability analysis in order to study the effect in the replication of process parameters such as maximum injection pressure, injection time, charge and polymer temperature, geometric factors such as width and separation between lines of the gratings and flow direction as well as demolding conditions. Among all factors, the one with a larger effect is the separation between consecutive trenches, which was studied in detail through Computational Fluid Dynamics simulations. In addition, a previously not reported sinking effect in the nanostructured area and a shrinking of the pattern period were characterized and simulated.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Quantification of nanomechanical properties of surfaces by higher harmonic monitoring in amplitude modulated AFM imaging

  • Gramazio, Federico
  • Lorenzoni, Matteo|||0000-0001-5287-8761
  • Pérez Murano, Francesc|||0000-0002-4647-8558
  • Evangelio Araujo, Laura
  • Fraxedas, Jordi|||0000-0002-2821-4831
The determination of nanomechanical properties is an intensive topic of study in several fields of nanophysics, from surface and materials science to biology. At the same time, amplitude modulation force microscopy is one of the most established techniques for nanoscale characterization. In this work, we combine these two topics and propose a method able to extract quantitative nanomechanical information from higher harmonic amplitude imaging in atomic force microscopy. With this method it is possible to discriminate between different materials in the stiffness range of 1-3 GPa, in our case thin films of PS-PMMA based block copolymers. We were able to obtain a critical lateral resolution of less than 20 nm and discriminate between materials with less than a 1 GPa difference in modulus. We show that within this stiffness range, reliable values of the Young's moduli can be obtained under usual imaging conditions and with standard dynamic AFM probes.