Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 27
Encontrada(s) 1 página(s)

Helvia. Repositorio Institucional de la Universidad de Córdoba
Publication Artículo científico antes de ser publicado, versión del autor (Preprint)

Efficient and environmentally friendly microwave-assisted synthesis of catalytically active magnetic metallic Ni nanoparticle

  • Zuliani, Alessio
  • Balu, Alina M.
  • Luque, Rafael
Pure magnetic metallic nickel was synthesized by a simple and fast microwave-assisted method using a monomode microwave reactor. Nickel chloride was employed as metal precursor, while an environmental-friendly mixture of ethylene glycol and ethanol was simultaneously used as solvent and reducing agent. The parameters combination, for the occurrence of the reaction, of the mixture molar fraction, and the metal precursor concentration was developed. The influence of the temperature and the time of the irradiation was investigated. The best performance (71% yield) was achieved at 250 °C in 5 min of microwave irradiation. The phase and the morphology of the metal were analyzed by X-ray diffraction, scanning emission microscopy, and transmission electron microscopy, while the surface area was determined by nitrogen physisorption. The material exhibited a strong magnetic behavior. The metallic nickel showed high catalytic activity for the hydrogenolysis of benzyl phenyl ether, a lignin model compound, in a microwave-assisted environmental-friendly reaction.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publication Artículo científico (JournalArticle)

Novel Applications of Microbial Fuel Cells in Sensors and Biosensors

  • Ivars-Barceló, Francisco
  • Zuliani, Alessio
  • Fallah, Marjan
  • Mashkour, Mehrdad
  • Rahimnejad, Mostafa
  • Luque, Rafael
A microbial fuel cell (MFC) is a type of bio-electrochemical system with novel features, such as electricity generation, wastewater treatment, and biosensor applications. In recent years, progressive trends in MFC research on its chemical, electrochemical, and microbiological aspects has resulted in its noticeable applications in the field of sensing. This review was consequently aimed to provide an overview of the most interesting new applications of MFCs in sensors, such as providing the required electrical current and power for remote sensors (energy supply device for sensors) and detection of pollutants, biochemical oxygen demand (BOD), and specific DNA strands by MFCs without an external analytical device (self-powered biosensors). Moreover, in this review, procedures of MFC operation as a power supply for pH, temperature, and organic loading rate (OLR) sensors, and also self-powered biosensors of toxicity, pollutants, and BOD have been discussed.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publication Artículo científico (JournalArticle)

Microwave-assisted preparation of Ag/Ag2S carbon hybrid structures from pig bristles as efficient HER electrocatalysts

  • Muñoz-Batista, Mario J.
  • Puente-Santiago, A.R.
  • Zuliani, Alessio
  • Cova, Camilla María
  • Luque, Rafael
  • Caballero, Álvaro
Ag/Ag2S hybrid structures have recently attracted significant interest due to their high chemical and thermal stability, in addition to their unique optical and electrical properties. However, their standard synthetic protocols have important drawbacks including long term and harsh reaction conditions and the utilization of highly toxic sulfur precursors. Herein, an innovative, simple one-pot green approach for the synthesis of Ag/Ag2S carbon hybrid structures is reported. The procedure involved a one-step microwave-assisted step using ethylene glycol as solvent and reducing agent, pig bristles as sulphur and carbon source and silver nitrate as metal precursor. Different amounts of silver nitrate were employed in order to investigate the synthetic mechanism for the formation of zerovalent silver over silver sulphide nanoparticles, producing three different samples. Materials were characterized by XRD, SEM, EDX, N2 physisorption and XPS spectroscopy. Aiming to prove the efficiency of the as-synthesized compounds, their electrocatalytic activities were explored in the hydrogen evolution reaction (HER) performing linear sweep voltammetries.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publication Artículo científico (JournalArticle)

A Sustainable Approach for the Synthesis of Catalytically Active Peroxidase-Mimic ZnS Catalysts

  • Cova, Camilla María
  • Zuliani, Alessio
  • Muñoz-Batista, Mario J.
  • Luque, Rafael
Zinc sulfides are emerging as promising catalysts in different fields such as photochemistry or organic synthesis. Nevertheless, the synthesis of ZnS compounds normally requires the utilization of toxic sulfur precursors, e.g., thiourea which is a contaminant and carcinogenic agent. As a result, new green and sustainable synthetic methodologies are needed. Herein, an innovative, simple, and cheap approach for the synthesis of ZnS carbon composites is reported. Zinc acetate dihydrate was employed as metal precursor while wasted pig bristles were employed as carbon and sulfur source. The phase and the morphology of the compounds were analyzed by XRD, XPS, SEM, and EDX and the surface area was determined by nitrogen physisorption. ZnS carbon materials showed remarkable peroxidase-like catalytic activity for two different model reactions: the liquid-phase selective oxidation of benzyl alcohol and toluene to benzaldehyde (conversions up to 63% and 29% and selectivities up to 86% and 87%, respectively) using hydrogen peroxide as oxidant under microwave irradiation.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publication Artículo científico (JournalArticle)

Sustainable protocol for the reduction of nitroarenes by heterogeneous Au@SBA‐15 using NaBH4 under flow conditions

  • Vaccaro, Luigi
  • Ferlin, Francesco
  • Giannoni, Tommaso
  • Zuliani, Alessio
  • Piermatti, Oriana
  • Luque, Rafael
Gold‐incorporated SBA‐15 catalyst was prepared by a solvent‐free ball milling approach. The catalyst showed high reactivity and selectivity in the reduction of a variety of nitroarenes to anilines operating in absolute EtOH using NaBH4 as reducing agent. The catalyst was reused in batch conditions over 5 consecutive runs without detecting any losses of activity and selectivity. Considering the high chemical stability and reusability of the catalytic system, a continuous flow protocol was also investigated and defined in order to minimize the production of waste associated to the process and optimize the continuous reuse of the catalyst. Benefits of flow conditions were proven by TON values that increased from 47.5 to 1902 and also by the minimization of both leaching (9.5 vs 1 ppm) and E‐factor values (8 vs 23 in batch).
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publication Artículo científico (JournalArticle)

Heterogeneously Catalyzed Synthesis of Imidazolones via Cycloisomerizations of Propargylic Ureas Using Ag and Au/Al SBA-15 Systems

  • Zuliani, Alessio
  • Ranjan, Prabhat
  • Luque, Rafael
  • Van der Eycken, Erik V.
The synthesis of imidazolones through the cycloisomerization of ureas, specifically propargylureas, has gained attention due to the large availability of starting materials. However, this type of synthesis normally requires the utilization of strong bases, such as NaOH, expensive homogeneous metal catalysts, such as Ag-, Au-, and Ru-based systems, or toxic and hazardous chemicals. Herein, a study of different synthetic routes for the preparation of imidazolones through the cycloisomerization of propargylic ureas under fast, mild, and environmentally friendly conditions with heterogeneous catalysis was undertaken. First, the synthesis were carried out under mild conditions using toluene and acetonitrile as solvents. Silver and gold nanoparticles supported on AlSBA-15 were used as heterogeneous catalysts. The catalysts were prepared by mechanochemical and microwave-assisted techniques. Sequentially, a range of solvents was replaced by the greener ethanol. Finally, all obtained results were combined in order to carry out the reaction using only water as solvent and promoter of the reaction. Aiming to expedite the procedure, the synthesis were carried out under conventional and microwave irradiation.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publication Artículo científico (JournalArticle)

Sonochemically-Promoted Preparation of Silica-Anchored Cyclodextrin Derivatives for Effcient Copper Catalysis

  • Martina, Katia
  • Calsolaro, Federica
  • Zuliani, Alessio
  • Berlier, Gloria
  • Chávez-Rivas, Fernando
  • Moran, Maria Jesus
  • Luque, Rafael
  • Cravotto, Giancarlo
Silica-supported metallic species have emerged as valuable green-chemistry catalysts because their high efficiency enables a wide range of applications, even at industrial scales. As a consequence, the preparation of these systems needs to be finely controlled in order to achieve the desired activity. The present work presents a detailed investigation of an ultrasound-promoted synthetic protocol for the grafting of β-cyclodextrin (β-CD) onto silica. Truly, ultrasound irradiation has emerged as a fast technique for promoting efficient derivatization of a silica surface with organic moieties at low temperature. Three different β-CD silica-grafted derivatives have been obtained, and the ability of β-CD to direct and bind Cu when CD is bonded to silica has been studied. A detailed characterization has been performed using TGA, phenolphthalein titration, FT-IR, diffuse reflectance (DR), DR UV-Vis, as well as the inductively-coupled plasma (ICP) of the β-CD silica-grafted systems and the relative Cu-supported catalysts. Spectroscopic characterization monitored the different steps of the reaction, highlighting qualitative differences in the properties of amino-derivatized precursors and final products. In order to ensure that the Cu-β-CD silica catalyst is efficient and robust, its applicability in Cu(II)-catalyzed alkyne azide reactions in the absence of a reducing agent has been explored. The presence of β-CD and an amino spacer has been shown to be crucial for the reactivity of Cu(II), when supported.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publication Artículo científico (JournalArticle)

Efficient Ru-based scrap waste automotive converter catalysts for the continuous-flow selective hydrogenation of cinnamaldehyde

  • Cova, Camilla María
  • Zuliani, Alessio
  • Muñoz-Batista, Mario J.
  • Luque, Rafael
The selective, efficient and sustainable continuous flow hydrogenation of a α,β-unsaturated aldehyde, i.e. cinnamaldehyde, to the corresponding unsaturated alcohol, i.e. cinnamyl alcohol, using a novel catalyst based on Ru-containing scrap waste automotive converters is reported. The catalyst was prepared by recycling and upgrading waste ceramic-cores of scrap automotive catalytic converters as supporting materials. Ruthenium was incorporated into the ceramic structures using a simple, fast and solventless mechanochemically assisted procedure followed by a chemical reduction step. Different catalysts were prepared with varying Ru contents. The materials were characterized by XRD, N2 physisorption, XPS, TEM, HRTEM and SEM/mapping analyses. Compared to Ru supported over most studied silica and alumina supports, the new system displayed an outstanding catalytic performance under continuous-flow conditions in terms of conversion and selectivity and a remarkable stability with time-on-stream, demonstrating a synergistic action between Ru and the waste catalytic converter support. A Ru loading of 10 wt% provided the optimum results, including a cinnamaldehyde conversion of up to 95% with a selectivity to cinnamyl alcohol of 80%.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publication Artículo científico (JournalArticle)

Scrap waste automotive converters as efficient catalysts for the continuous-flow hydrogenations of biomass derived chemicals

  • Cova, Camilla María
  • Zuliani, Alessio
  • Manno, Roberta
  • Sebastian, Victor
  • Luque, Rafael
The catalytic activity of the scrap ceramic-core of automotive catalytic converters (SCATs) was investigated in the continuous-flow hydrogenation of different biomass derived chemicals. The waste SCATs powders were deeply characterized by ICP-MS, TGA, MP-AES, XRD, N2 physisorption, HRTEM and EDS before and after the utilization as catalyst. The hydrogenation reactions of isopulegol to menthol; cinnamyl alcohol to hydrocinnamyl alcohol; isoeugenol to dihydroeugenol; vanillin to vanillyl alcohol and benzaldehyde to benzyl alcohol were performed studying the influence on of various reaction parameters (temperature, pressure, flow rate and concentration of the starting material) on final yields. The outstanding performance and stability obtained for the low metal content of waste-derived catalysts can be attributed to the co-presence of different noble metals as well as to the composite structure itself.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publication Artículo científico (JournalArticle)

Improving the electrocatalytic performance of sustainable Co/Carbon materials for oxygen evolution reaction by ultrasound and microwave assisted synthesis

  • Zuliani, Alessio
  • Cano, Manuel
  • Calsolaro, Federica
  • Puente-Santiago, A.R.
  • Giner-Casares, Juan J.
  • Rodríguez-Castellón, Enrique
  • Berlier, Gloria
  • Cravotto, Giancarlo
  • Martina, Katia
  • Luque, Rafael
The design of sustainable procedures for the preparation of cobalt/carbon-based materials as an anode for hydrogen fuel production through electrocatalytic water splitting has attracted much interest in the last few years. Herein, a novel environmentally friendly approach for the development of stable and active catalysts for the oxygen evolution reaction (OER) is reported. In detail, the methodology aimed at developing a sequence of composites having a low cobalt loading (<4%wt) using polyphenols extracted from green tea as metal stabilizers and activated carbon derived from pinecones as a metal-support as well as a coactive material. The approach exploited ultrasound (US), microwave (MW) and combined US/MWassisted techniques with the purpose of enhancing the final electrocatalytic activity of these new composites, replacing conventional high-temperature approaches. The results indicated that the soproduced electrocatalytic materials followed the order of activity US > MW/US > MW > conventional heating, with the best sample requiring an overpotential of 365 mV to deliver a current density of 10 mA cm_2 and a Tafel slope of 58 mV dec_1.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Life cycle assessment and cost evaluation of emerging technologies at early stages: The case of continuous flow synthesis of Rufinamide

  • Grimaldi, Fabio
  • Izeppi, Gerardo Antonio de Leon
  • Kirschneck, Dirk
  • Lettieri, Paola
  • Escribà i Gelonch, Marc
  • Hessel, Volker
In the pharma and fine chemical industries, the development of continuous flow technologies is a process intensification step of primary importance towards the manufacturing of high-quality products, while reducing the environmental impact and cost of production. The sustainability and profitability of a process can be measured through life cycle Assessment and cost evaluation. However, when applied to emerging technologies, these need to be performed at different stages of the process development in order to limit the uncertainties arising from the scale-up, and hence providing high-fidelity projections of environmental impacts and costs at larger scales. The output of the assessment can in fact vary significantly depending on the maturity of the technology and this translates into having different results at commercial scale compared to early estimations. Therefore, in this article, we perform an assessment at two different scales of production, lab and mini-pilot scale, with the aim of quantifying the uncertainties of the assessment related to the scale-up, identifying the hotspots of the system, and hence providing guidelines for the further steps of process development. The subject of the assessment is the continuous flow synthesis of Rufinamide. It is the first time that this synthesis is evaluated at pilot-scale. The results show that low yields in the cycloaddition drastically affect the waste management and the production of precursors, and hence increases environmental impacts and cost of production. This calls for the need of prioritizing the optimization of this synthesis step in order to deploy a green and economically competitive production technology., European Union's Horizon 2020 research and innovation, Grant/Award Number: Marie Sklodowska-Curie grant agreement no.721290
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

110th Anniversary: Nucleation of Ag nanoparticles in helical microfluidic reactor. Comparison between microwave and conventional heating

  • Mano, Roberta
  • Sebastián, Víctor
  • Mallada, Reyes
  • Ricote, J.
The synthesis of silver nanoparticles with small average size and narrow size distribution is a requirement for applications in different fields such as antibacterial or catalysis. Previous studies of nanoparticles synthesis confirm the advantages of combining continuous flow and microwave dielectric heating, given the possibilities that arise regarding the control of residence time and localized volumetric heating. In this paper, we present two experimental set-ups to perform the continuous synthesis of silver nanoparticles using microwave heating (MWH) and conventional heating (CH). Experimental and simulated data confirm a different temperature profile along the reactor, with the case of MWH being more favorable. As a result, the nanoparticles synthesized under MWH presented a synthesis yield of 54% and a narrow particle size distribution (19 ± 4.3 nm). Furthermore, MWH led to reduced wall fouling by deposition of product material and allowed fast cooling of the product stream, preventing further growth of the nanoparticles., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 721290. This publication reflects only the author’s view, exempting the Community from any liability. Project website: http://cosmicetn.eu/. Financial support from CIBERBBN (initiative funded by the VI National R&D&i Plan 2008−2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund) and Gobierno de Aragon (T57_17R p) - Feder 2014-2020 “Construyendo Europa desde Aragoń ” are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Continuous flow synthesis of menthol via tandem cyclisation–hydrogenation of citronellal catalysed by scrap catalytic converters

  • Zuliani, Alessio
  • Cova, Camilla Maria
  • Manno, Roberta
  • Sebastián, Víctor
  • Romero, Antonio A.
  • Luque, Rafael
A continuous flow synthesis of menthol starting from citronellal catalysed by scrap catalytic converters is reported. The reaction was conducted in a tandem system connecting in series two catalytic systems, with the first having Lewis acid properties (favouring the cyclisation of citronellal to isopulegols) and the second having hydrogenation catalytic activity (catalysing the hydrogenation of isopulegols to menthols). A Lewis acid catalyst was prepared by supporting iron oxide nanoparticles over a waste material, i.e. the ceramic core of scrap catalytic converters (SCATs) via a microwave assisted method. Most importantly, SCATs, containing a low residual noble metal content, could be directly employed in the second step as hydrogenation catalysts. The reaction was performed studying the influence on the yield and selectivity to (−)-menthol of various reaction parameters (T, p and flow rate). Under the best reaction conditions (at a flow rate of 0.1 mL min−1 and at 373 K and 413 K for cyclisation and hydrogenation steps respectively) a conversion of >99% of (+)-citronellal to (−)-menthol with 77% final yield was achieved., Rafael Luque gratefully acknowledges the funding from the MINECO under project CTQ2016-78289-P, co-financed by the FEDER and the contract for Camilla Maria Cova associated with this project. This project received funding from European Union's Horizon 2020 research and innovation programme under Marie Skłodowska-Curie grant agreement no. 721290. The publication was prepared with support from RUDN University program 5-100., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Scrap waste automotive converters as efficient catalysts for the continuous-flow hydrogenations of biomass derived chemicals

  • Cova, Camilla Maria
  • Zuliani, Alessio
  • Manno, Roberta
  • Sebastián, Víctor
  • Luque, Rafael
The catalytic activity of scrap ceramic-cores of automotive catalytic converters (SCATs) was investigated in the continuous-flow hydrogenation of different biomass-derived chemicals. The waste SCAT powders were deeply characterized by ICP-MS, TGA, MP-AES, XRD, N2 physisorption, TPR, HRTEM and EDS before and after utilization as a catalyst. The hydrogenation reactions of isopulegol to menthol, cinnamyl alcohol to hydrocinnamyl alcohol, isoeugenol to dihydroeugenol, vanillin to vanillyl alcohol and benzaldehyde to benzyl alcohol were performed studying the influence of various reaction parameters (temperature, pressure, flow rate and concentration of the starting material) on the final yields. The outstanding performance and stability obtained for the low metal content of waste-derived catalysts can be attributed to the co-presence of different noble metals as well as to the composite structure itself., Rafael Luque gratefully acknowledges MINECO for funding under project CTQ2016-78289-P, co-financed with FEDER funds and the contract for Camilla Maria Cova associated with this project. This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 721290. The publication has been prepared with support from RUDN University program 5-100., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ultra-small silver nanoparticles immobilized in mesoporous SBA-15. Microwave-assisted synthesis and catalytic activity in the 4-nitrophenol reduction

  • Manno, Roberta
  • Sebastián, Víctor
  • Irusta, Silvia
  • Mallada, Reyes
  • Ricote, J.
Despite the continuous developments in the synthesis of noble metal nanoparticles, the uniformity of particle size distribution still represents a critical aspect. A fast and homogeneous nucleation is a key requirement to achieve a monodisperse particle size distribution and in this scenario, the application of alternative energy sources may constitute a winning strategy for the development of highly active nanocatalysts with unique properties. Here we present several approaches to control the synthesis of Ag nanoparticles stabilized by an anionic template, and the results evidence the advantages of adopting unconventional heating techniques such as microwave heating. The fast and selective electromagnetic heating strongly reduced the nucleation and growth times, impacting on the homogeneity of the resulting particle size distribution. In this work, we have carried out the microwave-assisted synthesis of Ag nanoparticles and the resulting nanoparticles were compared to those synthesized under conventional heating using an oil bath, showing that the differences in temperature profile and heating rates between the two synthesis pathways had a clear effect on the size distribution of the resulting nanoparticles as well as on their stability under long term storage. Finally, the synthesized ultra-small Ag nanoparticles were deposited on a mesoporous substrate, reducing undesired Ostwald ripening and facilitating their reusability. This nanocatalyst was adopted for the abatement of 4-nitrophenol, a well-known carcinogenic pollutant with adverse effects on human beings and aquatic life. The catalytic results confirm the high activity of the catalyst thanks to the high dispersion achieved afforded by ultra-small Ag nanoparticles and the accessibility provided by the wide SBA-15 mesoporous channels., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 721290., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ultrasound-assisted preparation of Mo/ZSM-5 zeolite catalyst for non-oxidative methane dehydroaromatization

  • Ramirez-Mendoza, Heidy
  • Valdez Lancinha Pereira, Mafalda
  • Gerven, Tom van
  • Lutz, Cécile
  • Julian, Ignacio
This article belongs to the Special Issue Irradiation-Driven Process Intensification in Heterogeneous Catalysis., The activity and selectivity of Mo/ZSM-5, benchmarking catalyst for the non-oxidative dehydroaromatization of methane, strongly depend on the cluster size, spatial distribution, and chemical environment of the Mo-based active sites. This study discloses the use of an ultrasound-assisted ion-exchange (US-IE) technique as an alternative Mo/ZSM-5 synthesis procedure in order to promote metal dispersion along the zeolite framework. For this purpose, a plate transducer (91.8 kHz) is employed to transmit the ultrasonic irradiation (US) into the ion-exchange reactor. The physico-chemical properties and catalytic activity of samples prepared under the said irradiation procedure and traditional impregnation (IWI) method are critically evaluated. Characterization results suggest that US neither affects the crystalline structure nor the particle size of the parent zeolite. However, US-IE promotes molybdenum species dispersion, avoids clustering at the external fresh zeolite surface and enhances molybdate species anchoring to the zeolite framework with respect to IWI. Despite the improved metal dispersion, the catalytic activity between catalysts synthesized by US-IE and IWI is comparable. This suggests that the sole initial dispersion enhancement does not suffice to boost the catalyst productivity and further actions such ZSM-5 support and catalyst pre-conditioning are required. Nevertheless, the successful implementation of US-IE and the resulting metal dispersion enhancement pave the way toward the application of this technique to the synthesis of other dispersed catalysts and materials of interest., This project has received funding from the Europeans Union’s Horizon 2020 for research and innovation program under the Marie Sklodowska-Curie grant agreement No 721290 (MSCA-ITN COSMIC). This publication reflects only the author’s view, exempting the Community from any liability. Project website: http://cosmic-etn.eu/ (accessed on 31 January 2021). CIBER-BBN (initiative funded by the VI National R&D&i Plan 2008–2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund) and NANBIOSIS ICTS are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Microwave-assisted flow synthesis of multicore iron oxide nanoparticles

  • Panariello, Luca
  • Besenhard, Maximilian O.
  • Damilos, Spyridon
  • Sergides, Andreas
  • Sebastián, Víctor
  • Irusta, Silvia
  • Tang, Junwang
  • Thanh, Nguyen Thi Kim
  • Gavriilidis, Asterios
Coprecipitation is by far the most common synthesis method for iron oxide nanoparticles (IONPs). However, reproducibility and scalability represent a major challenge. Therefore, innovative processes for scalable production of IONPs are highly sought after. Here, we explored the combination of microwave heating with a flow reactor producing IONPs through coprecipitation. The synthesis was initially studied in a well-characterised microwave-heated flow system, enabling the synthesis of multicore IONPs, with control over both the single core size and the multicore hydrodynamic diameter. The effect of residence time and microwave power was investigated, enabling the synthesis of multicore nanostructures with hydrodynamic diameter between ∼35 and 70 nm, with single core size of 3–5 nm. Compared to particles produced under conventional heating, similar single core sizes were observed, though with smaller hydrodynamic diameters. The process comprised of the initial IONP coprecipitation followed by the addition of the stabiliser (citric acid and dextran). The ability of precisely controlling the stabiliser addition time (distinctive of flow reactors), contributed to the synthesis reproducibility. Finally, scale-up by increasing the reactor length and using a different microwave cavity was demonstrated, producing particles of similar structure as those from the small scale system, with a throughput of 3.3 g/h., L.P. received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Grant Agreement No. 721290. This publication reflects only the authors’ view, exempting the Community from any liability. Project website: http://cosmic-etn.eu/. We also thank EPSRC (Grant EP/M015157/1) for funding. AS thanks the EPSRC CDT for the Advanced Characterization of Materials (grant EP/L015277/1) for his studentship. VS acknowledges the ICTS ELECMI-LMA for offering access to their instruments and expertise., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Rapid microwave heating and fast quenching for the highly efficient production of long-term stable supported Ag nanoclusters

  • Manno, Roberta
  • Ranjan, Prabhat
  • Sebastián, Víctor
  • Mallada, Reyes
  • Irusta, Silvia
  • Eycken, Erik V. van der
  • Santamaría, Jesús
Given the exciting potential of metallic clusters in a variety of fields, the development of novel preparation methods to accurately controlling the cluster size has become a research priority. Specifically, for catalytic applications, the synthesis and deployment of metallic nanoclusters on a proper substrate is perhaps the main bottleneck. Here, we have adopted an alternative reactor that uses simultaneous ice cooling and microwave heating (unlike water ice is a low microwave absorber) for the synthesis of Ag nanoclusters directly over a support with ordered mesopores (SBA-15). The reactor design exploits the selectivity of microwave heating, assuring a rapid localized nucleation followed by a nearly instantaneous quenching that largely avoids the aggregation of nascent clusters as well as Ostwald ripening mechanisms. We have compared this new synthesis approach with some previously reported methods for the production of supported silver nanoclusters: conventional batch reactor and also a continuous flow microreactor. The resulting Ag clusters were initially analyzed in terms of size distribution, textural properties and catalytic activity in the reduction of 4-nitrophenol. Finally, encouraged by the good results obtained, these nanoclusters were also employed in the production of different cyclic organic compounds, building blocks for pharmaceutical and photochemical applications. The nanoclusters displayed a high catalytic activity, lowering the metal loading required to achieve high yield and selectivity. Furthermore, the stabilization of the clusters over the mesoporous substrate allowed their reuse in several reaction cycles. In fact, the method produced exceptionally stable Ag clusters, whose catalytic properties were preserved even after one year of storage., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 721290 (recipient RM and PR; experiments and writing). This publication reflects only the author’s view, exempting the Community from any liability. Project website: http://cosmicetn.eu/. V.S. acknowledged the financial support from Ministerio de Ciencia, Innovación y Universidades, Programa Retos Investigación, Proyecto REF: PID2021-127847OB-I00. Financial support from CIBERBBN (initiative funded by the VI National R&D&i Plan 2008 −2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund) is gratefully acknowledged (recipient VS,RM,SI, JS: experiments, writing and supervision). This paper has been supported by the RUDN University Strategic Academic Leadership Program (recipient EVdE; writing and supervision). ICTS ELECMI-LMA and NANBIOSIS are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Continuous microwave-assisted synthesis of silver nanoclusters confined in mesoporous SBA-15: Application in alkyne cyclizations

  • Manno, Roberta
  • Ranjan, Prabhat
  • Sebastián, Víctor
  • Mallada, Reyes
  • Irusta, Silvia
  • Sharma, Upendra K.
  • Eycken, Erik V. van der
  • Santamaría, Jesús
Metal nanoclusters are becoming exciting candidates as highly efficient catalysts for heterogeneous processes in view of their extraordinary surface to volume ratio and the high concentration of uncoordinated atoms that contribute to enhanced catalytic activity. For this reason, the development of accurate and reliable procedures for the synthesis of stable and supported metal nanoclusters is highly desirable. Although Ag nanoclusters (Ag NCs) stabilized by anion templates with a structure like Agm+nm+ and a long lifetime have been widely investigated, supported clusters present significant advantages regarding their recovery and recyclability. In spite of their potential, the stabilization of clusters of precious metals on porous substrates is scarcely investigated. Herein, we present an innovative approach for the synthesis of stable Ag nanoclusters designed with the aim of achieving a strict control of key phases such as mixing, microwave heating, and quenching. The catalyst was used for the activation of alkynes showing excellent activity for the formation of C–O, C–N, and C–C bonds. When compared with commonly used homogeneous Ag salts, Ag NCs enhanced the catalytic activity toward the cyclization of a wide range of substrates, thereby minimizing the metal loading and allowing the separation as well as the reuse of the catalyst for multiple cycles., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 721290. This publication reflects only the author’s view, exempting the Community from any liability. Project website: http://cosmic-etn.eu/. Financial support from CIBERBBN (initiative funded by the VI National R&D&i Plan 2008–2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund) is gratefully acknowledged. We also acknowledge the financial support from RUDN University Program 5-100., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Continuous single-phase synthesis of [Au25(Cys)18] nanoclusters and their photobactericidal enhancement

  • Hwang, Gi Byoung
  • Wu, Gaowei
  • Shin, Juhun
  • Panariello, Luca
  • Sebastián, Víctor
  • Karu, Kersti
  • Allan, Elaine
  • Gavriilidis, Asterios
  • Parkin, Ivan P.
Thiolate-gold nanoclusters have various applications. However, most of the synthesis methods require prolonged synthesis times from several hours to days. In the present study, we report a rapid synthesis method for [Au25(Cys)18] nanoclusters and their application for photobactericidal enhancement. For [Au25(Cys)18] synthesis, we employed a tube-in-tube membrane reactor using CO as a reducing agent at elevated temperatures. This approach allows continuous generation of high-quality [Au25(Cys)18] within 3 min. Photobactericidal tests against Staphylococcus aureus showed that crystal violet-treated polymer did not have photobactericidal activity, but addition of [Au25(Cys)18] in the treated polymer demonstrated a potent photobactericidal activity at a low white light flux, resulting in >4.29 log reduction in viable bacteria numbers. Steady-state and time-resolved photoluminescence spectroscopies demonstrated that after light irradiation, photoexcited electrons in crystal violet flowed to [Au25(Cys)18] in the silicone, suggesting that redox reaction from [Au25(Cys)18] enhanced the photobactericidal activity. Stability tests revealed that leaching of crystal violet and [Au25(Cys)18] from the treated silicone was negligible and cyclic testing showed that the silicone maintained a strong photobactericidal activity after repeated use., The authors thank the EPSRC for the financial support (EP/M015157/1) through the Manufacturing Advanced Functional Materials (MAFuMa) scheme. LP received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 721290. This publication reflects only the authors’ view, exempting the Community from any liability. Project website: http://cosmic-etn.eu/. VS acknowledges the LMA-INA for offering access to their instruments and the financial support of Ministerio de Ciencia, Innovación y Universidades, Programa Retos Investigación, Proyecto REF: RTI2018-099019-A-I00., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

110th Anniversary: Nucleation of Ag Nanoparticles in Helical Microfluidic Reactor. Comparison between Microwave and Conventional Heating

  • Manno, Roberta
  • Sebastian, Victor
  • Mallada, Reyes
  • Santamaria, Jesús
The synthesis of silver nanoparticles with small average size and narrow size distribution is a requirement for applications in different fields such as antibacterial or catalysis. Previous studies of nanoparticles synthesis confirm the advantages of combining continuous flow and microwave dielectric heating, given the possibilities that arise regarding the control of residence time and localized volumetric heating. In this paper, we present two experimental set-ups to perform the continuous synthesis of silver nanoparticles using microwave heating (MWH) and conventional heating (CH). Experimental and simulated data confirm a different temperature profile along the reactor, with the case of MWH being more favorable. As a result, the nanoparticles synthesized under MWH presented a synthesis yield of 54% and a narrow particle size distribution (19 ± 4.3 nm). Furthermore, MWH led to reduced wall fouling by deposition of product material and allowed fast cooling of the product stream, preventing further growth of the nanoparticles.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Ultra-Small Silver Nanoparticles Immobilized in Mesoporous SBA-15. Microwave-Assisted Synthesis and Catalytic Activity in the 4-Nitrophenol Reduction

  • Manno, R.
  • Sebastian, V.
  • Irusta, S.
  • Mallada, R.
  • Santamaria, J.
Despite the continuous developments in the synthesis of noble metal nanoparticles, the uniformity of particle size distribution still represents a critical aspect. A fast and homogeneous nucleation is a key requirement to achieve a monodisperse particle size distribution and in this scenario, the application of alternative energy sources may constitute a winning strategy for the development of highly active nanocatalysts with unique properties. Here we present several approaches to control the synthesis of Ag nanoparticles stabilized by an anionic template, and the results evidence the advantages of adopting unconventional heating techniques such as microwave heating. The fast and selective electromagnetic heating strongly reduced the nucleation and growth times, impacting on the homogeneity of the resulting particle size distribution. In this work, we have carried out the microwave-assisted synthesis of Ag nanoparticles and the resulting nanoparticles were compared to those synthesized under conventional heating using an oil bath, showing that the differences in temperature profile and heating rates between the two synthesis pathways had a clear effect on the size distribution of the resulting nanoparticles as well as on their stability under long term storage. Finally, the synthesized ultra-small Ag nanoparticles were deposited on a mesoporous substrate, reducing undesired Ostwald ripening and facilitating their reusability. This nanocatalyst was adopted for the abatement of 4-nitrophenol, a well-known carcinogenic pollutant with adverse effects on human beings and aquatic life. The catalytic results confirm the high activity of the catalyst thanks to the high dispersion achieved afforded by ultra-small Ag nanoparticles and the accessibility provided by the wide SBA-15 mesoporous channels.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Preparation of Cu cluster catalysts by simultaneous cooling-microwave heating: application in radical cascade annulation

  • Song, L.
  • Manno, R.
  • Ranjan, P.
  • Sebastian, V.
  • Irusta, S.
  • Mallada, R.
  • Van Meervelt, L.
  • Santamaria, J.
  • Van der Eycken, E.V.
One of the hallmarks of microwave irradiation is its selective heating mechanism. In the past 30 years, alternative designs of chemical reactors have been introduced, where the microwave (MW) absorber occupies a limited reactor volume but the surrounding environment is MW transparent. This advantage results in a different heating profile or even the possibility to quickly cool down the system. Simultaneous cooling-microwave heating has been largely adopted for organic chemical transformations. However, to the best of our knowledge there are no reports of its application in the field of nanocluster synthesis. In this work, we propose an innovative one-pot procedure for the synthesis of Cu nanoclusters. The cluster nucleation was selectively MW-activated inside the pores of a highly ordered mesoporous substrate. Once the nucleation event occurred, the crystallization reaction was instantaneously quenched, precluding the growth events and favoring the production of Cu clusters with a homogenous size distribution. Herein, we demonstrated that Cu nanoclusters could be successfully adopted for radical cascade annulations ofN-alkoxybenzamides, resulting in various tricyclic and tetracyclic isoquinolones, which are widely present in lots of natural products and bioactive compounds. Compared to reported homogeneous methods, supported Cu nanoclusters provide a better platform for a green, sustainable and efficient heterogeneous approach for the synthesis of tricyclic and tetracyclic isoquinolones, avoiding a variety of toxic waste/byproducts and metal contamination in the final products.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Ultrasound-Assisted Preparation of Mo/ZSM-5 Zeolite Catalyst for Non-Oxidative Methane Dehydroaromatization

  • Ramirez-Mendoza, Heidi
  • Valdez Lacinha Pereira, Mafalda
  • Van Gerven, Tom
  • Lutz, Cécile
  • Julian, Ignacio
The activity and selectivity of Mo/ZSM-5, benchmarking catalyst for the non-oxidative dehydroaromatization of methane, strongly depend on the cluster size, spatial distribution, and chemical environment of the Mo-based active sites. This study discloses the use of an ultrasound-assisted ion-exchange (US-IE) technique as an alternative Mo/ZSM-5 synthesis procedure in order to promote metal dispersion along the zeolite framework. For this purpose, a plate transducer (91.8 kHz) is employed to transmit the ultrasonic irradiation (US) into the ion-exchange reactor. The physico-chemical properties and catalytic activity of samples prepared under the said irradiation procedure and traditional impregnation (IWI) method are critically evaluated. Characterization results suggest that US neither affects the crystalline structure nor the particle size of the parent zeolite. However, US-IE promotes molybdenum species dispersion, avoids clustering at the external fresh zeolite surface and enhances molybdate species anchoring to the zeolite framework with respect to IWI. Despite the improved metal dispersion, the catalytic activity between catalysts synthesized by US-IE and IWI is comparable. This suggests that the sole initial dispersion enhancement does not suffice to boost the catalyst productivity and further actions such ZSM-5 support and catalyst pre-conditioning are required. Nevertheless, the successful implementation of US-IE and the resulting metal dispersion enhancement pave the way toward the application of this technique to the synthesis of other dispersed catalysts and materials of interest.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Microwave-assisted flow synthesis of multicore iron oxide nanoparticles

  • Panariello, L.
  • Besenhard, M.O.
  • Damilos, S.
  • Sergides, A.
  • Sebastian, V.
  • Irusta, S.
  • Tang, J.
  • Thanh, Nguyen Thi Kim
  • Gavriilidis, A.
Coprecipitation is by far the most common synthesis method for iron oxide nanoparticles (IONPs). However, reproducibility and scalability represent a major challenge. Therefore, innovative processes for scalable production of IONPs are highly sought after. Here, we explored the combination of microwave heating with a flow reactor producing IONPs through coprecipitation. The synthesis was initially studied in a well-characterised microwave-heated flow system, enabling the synthesis of multicore IONPs, with control over both the single core size and the multicore hydrodynamic diameter. The effect of residence time and microwave power was investigated, enabling the synthesis of multicore nanostructures with hydrodynamic diameter between ∼35 and 70 nm, with single core size of 3–5 nm. Compared to particles produced under conventional heating, similar single core sizes were observed, though with smaller hydrodynamic diameters. The process comprised of the initial IONP coprecipitation followed by the addition of the stabiliser (citric acid and dextran). The ability of precisely controlling the stabiliser addition time (distinctive of flow reactors), contributed to the synthesis reproducibility. Finally, scale-up by increasing the reactor length and using a different microwave cavity was demonstrated, producing particles of similar structure as those from the small scale system, with a throughput of 3.3 g/h.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Rapid microwave heating and fast quenching for the highly efficient production of long-term stable supported Ag nanoclusters

  • Manno, R.
  • Ranjan, P.
  • Sebastian, V.
  • Mallada, R.
  • Irusta, S.
  • Van der Eycken, E.V.
  • Santamaria, J.
Given the exciting potential of metallic clusters in a variety of fields, the development of novel preparation methods to accurately controlling the cluster size has become a research priority. Specifically, for catalytic applications, the synthesis and deployment of metallic nanoclusters on a proper substrate is perhaps the main bottleneck. Here, we have adopted an alternative reactor that uses simultaneous ice cooling and microwave heating (unlike water ice is a low microwave absorber) for the synthesis of Ag nanoclusters directly over a support with ordered mesopores (SBA-15). The reactor design exploits the selectivity of microwave heating, assuring a rapid localized nucleation followed by a nearly instantaneous quenching that largely avoids the aggregation of nascent clusters as well as Ostwald ripening mechanisms. We have compared this new synthesis approach with some previously reported methods for the production of supported silver nanoclusters: conventional batch reactor and also a continuous flow microreactor. The resulting Ag clusters were initially analyzed in terms of size distribution, textural properties and catalytic activity in the reduction of 4-nitrophenol. Finally, encouraged by the good results obtained, these nanoclusters were also employed in the production of different cyclic organic compounds, building blocks for pharmaceutical and photochemical applications. The nanoclusters displayed a high catalytic activity, lowering the metal loading required to achieve high yield and selectivity. Furthermore, the stabilization of the clusters over the mesoporous substrate allowed their reuse in several reaction cycles. In fact, the method produced exceptionally stable Ag clusters, whose catalytic properties were preserved even after one year of storage.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Life cycle assessment and cost evaluation of emerging technologies at early stages: The case of continuous flow synthesis of Rufinamide

  • Grimaldi, Fabio
  • Izeppi, Gerardo Antonio de Leon
  • Kirschneck, Dirk
  • Lettieri, Paola
  • Escribà i Gelonch, Marc
  • Hessel, Volker
In the pharma and fine chemical industries, the development of continuous flow technologies is a process intensification step of primary importance towards the manufacturing of high-quality products, while reducing the environmental impact and cost of production. The sustainability and profitability of a process can be measured through life cycle Assessment and cost evaluation. However, when applied to emerging technologies, these need to be performed at different stages of the process development in order to limit the uncertainties arising from the scale-up, and hence providing high-fidelity projections of environmental impacts and costs at larger scales. The output of the assessment can in fact vary significantly depending on the maturity of the technology and this translates into having different results at commercial scale compared to early estimations. Therefore, in this article, we perform an assessment at two different scales of production, lab and mini-pilot scale, with the aim of quantifying the uncertainties of the assessment related to the scale-up, identifying the hotspots of the system, and hence providing guidelines for the further steps of process development. The subject of the assessment is the continuous flow synthesis of Rufinamide. It is the first time that this synthesis is evaluated at pilot-scale. The results show that low yields in the cycloaddition drastically affect the waste management and the production of precursors, and hence increases environmental impacts and cost of production. This calls for the need of prioritizing the optimization of this synthesis step in order to deploy a green and economically competitive production technology., European Union's Horizon 2020 research and innovation, Grant/Award Number: Marie Sklodowska-Curie grant agreement no.721290