Skip to main content

DESARROLLO DE PROCESOS CONTINUOS QUIMICO-ENZIMATICOS PARA VALORIZACION DE BIOMASA

CTQ2016-78289-P

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2016
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE CORDOBA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

A 2D copper-imidazolate framework without thermal treatment as an efficient ORR electrocatalyst for Zn-air batteries

  • Franco, Ana
  • Salatti-Dorado, José Ángel
  • García-Caballero, Valentín
  • Lorca, Sebastián
  • Camacho, Luis
  • Cano, Manuel
  • Fernández- Romero, Antonio J.
  • Delgado Jaén, Juan José
  • Giner-Casares, Juan J.
  • Carrillo-Carrión, Carolina
To face unmet energy demands, the search for more stable, low-cost, and scalable electrocatalyst materials is imperative. Within this context, single-atom catalysts (SACs) have drawn considerable attention due to their maximum atom utilization. With this idea in mind, we have synthesized a new ultrathin and water-stable 2D Cu-based metal-organic framework (2DCIF), which presents a notable electrocatalytic activity for the oxygen reduction reaction (ORR) in alkaline media without the need for calcination, which makes the difference when compared to most MOF-based electrocatalysts. The designed MOF-based SAC consists of single-atom sites (isolated and accessible Cu) coordinated to imidazole carboxylic ligands, giving rise to Cu-N4O actives sites confined in a 2D-nanostructured network. This unique structure, along with the ultrathin nanosheets that favor mass transport and electrical conductivity, and the high chemical stability of these 2DCIFs are the key features that endow them with excellent performance in the ORR, which occurs via a direct four-electron transfer pathway, with an onset potential of 0.86 V vs. RHE and a maximum current density of 6.4 mA cm(-2). These good catalytic properties of 2DCIFs have allowed their use as efficient air electrodes in alkaline flooded and all-solid-state Zn-air batteries. In the former case, 2DCIF-based air electrodes presented a specific power density of 91.2 kW cm(-2) kg(-1) and a specific capacity of 296.2 A h g(-1), significantly exceeding the specific capacity values reported previously for other Cu-based catalysts. Besides, the specific capacity increased to 389.1 A h g(-1) when 2DCIFs were tested in an all-solid-state Zn-air battery., C. C.-C. acknowledges the financial support by Spanish Ministry of Science, Innovation and Universities (MICINN) and the Spanish Research Agency (AEI) through the "Ramon y Cajal" programme (RYC-2019-027527-I) and PID2019-107665RJ-I00 project. C. C.-C. also acknowledges funding of the University of Seville through the "VI Plan Propio de Investigacion y Transferencia de la US" (VIPPIT-2020-IV.2). A. F. acknowledges MICINN for an FPI contract associated with CTQ2016-78289-P. J. J. G.-C. also received funding from MICINN and AEI through the PID2020-112744GB-I00/AEI/10.13039/501100011033 project. J. J. D thanks MICINN and the Andalusian Government for funding through projects PID2020-113809RB-C33 and the ELECMIC facilities. A. J. F. R. and S. L. thank MICINN and AEI for funding through the PID2019-104272RB-C55/AEI/10.13039/501100011033 project, and Fundacion Seneca-Agencia de Ciencia y Tecnologia de la Region de Murcia for financial support through the 20985/PI/18 project.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Continuous flow synthesis of menthol via tandem cyclisation–hydrogenation of citronellal catalysed by scrap catalytic converters

  • Zuliani, Alessio
  • Cova, Camilla Maria
  • Manno, Roberta
  • Sebastián, Víctor
  • Romero, Antonio A.
  • Luque, Rafael
A continuous flow synthesis of menthol starting from citronellal catalysed by scrap catalytic converters is reported. The reaction was conducted in a tandem system connecting in series two catalytic systems, with the first having Lewis acid properties (favouring the cyclisation of citronellal to isopulegols) and the second having hydrogenation catalytic activity (catalysing the hydrogenation of isopulegols to menthols). A Lewis acid catalyst was prepared by supporting iron oxide nanoparticles over a waste material, i.e. the ceramic core of scrap catalytic converters (SCATs) via a microwave assisted method. Most importantly, SCATs, containing a low residual noble metal content, could be directly employed in the second step as hydrogenation catalysts. The reaction was performed studying the influence on the yield and selectivity to (−)-menthol of various reaction parameters (T, p and flow rate). Under the best reaction conditions (at a flow rate of 0.1 mL min−1 and at 373 K and 413 K for cyclisation and hydrogenation steps respectively) a conversion of >99% of (+)-citronellal to (−)-menthol with 77% final yield was achieved., Rafael Luque gratefully acknowledges the funding from the MINECO under project CTQ2016-78289-P, co-financed by the FEDER and the contract for Camilla Maria Cova associated with this project. This project received funding from European Union's Horizon 2020 research and innovation programme under Marie Skłodowska-Curie grant agreement no. 721290. The publication was prepared with support from RUDN University program 5-100., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Scrap waste automotive converters as efficient catalysts for the continuous-flow hydrogenations of biomass derived chemicals

  • Cova, Camilla Maria
  • Zuliani, Alessio
  • Manno, Roberta
  • Sebastián, Víctor
  • Luque, Rafael
The catalytic activity of scrap ceramic-cores of automotive catalytic converters (SCATs) was investigated in the continuous-flow hydrogenation of different biomass-derived chemicals. The waste SCAT powders were deeply characterized by ICP-MS, TGA, MP-AES, XRD, N2 physisorption, TPR, HRTEM and EDS before and after utilization as a catalyst. The hydrogenation reactions of isopulegol to menthol, cinnamyl alcohol to hydrocinnamyl alcohol, isoeugenol to dihydroeugenol, vanillin to vanillyl alcohol and benzaldehyde to benzyl alcohol were performed studying the influence of various reaction parameters (temperature, pressure, flow rate and concentration of the starting material) on the final yields. The outstanding performance and stability obtained for the low metal content of waste-derived catalysts can be attributed to the co-presence of different noble metals as well as to the composite structure itself., Rafael Luque gratefully acknowledges MINECO for funding under project CTQ2016-78289-P, co-financed with FEDER funds and the contract for Camilla Maria Cova associated with this project. This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 721290. The publication has been prepared with support from RUDN University program 5-100., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Full potential of microwave-assisted processes: From synthesis of high-quality MIL-101(Fe) catalyst to furfural valorization

  • Franco, Ana
  • Balestra, Salvador R. G.
  • Hamad, Said
  • Carrillo-Carrión, Carolina
Metal-organic frameworks (MOFs) have emerged as promising catalysts in biomass valorization processes, due to mainly their high structural and chemical flexibility when compared to other catalytic materials. However, it is still challenging to achieve perfect control in the synthetic method to obtain high-quality MOF particles containing uniform active sites, which will strongly influence their further catalytic performance. Herein, we have demonstrated that microwaves (MWs) can play a key role not only in the preparation of the MOF catalyst, specifically MIL-101(Fe), but also in performing the MOF-catalyzed oxidative esterification of furfural to methyl-2-furoate under mild conditions and in the absence of a base. MIL-101(Fe) exhibited a high conversion of furfural (>90 %) and excellent selectivity to methyl-2-furoate (>95 %) in just 1 h of reaction and at a moderate temperature (60 °C). A series of control experiments and DFT-mechanistic studies revealed the pivotal role played by the MIL-101(Fe) particles to drive the preferential formation of the target compound methyl-2-furoate, and evidenced that the MOF behaves as a truly heterogeneous catalyst. Overall, this work demonstrates that the potential of MW energy is underexploited, and highlights that there is still a long way to go in the development of new MOF-based catalytic approaches for biomass transformations., C.C.-C. acknowledges the financial support from the Spanish National Research Council (CSIC) through an intramural project (Ref: 202280I170). A.F. acknowledges the Spanish Ministry of Science and Innovation for an FPI contract associated with the CTQ2016-78289-P project. S.H. also thanks the Spanish Ministry of Science and Innovation for funding through the PID2019-110430GB-C22 project. We also thank the research group FQM-383 (University of Córdoba) for letting us use its facilities., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Facile synthesis of B/g-C3N4composite materials for the continuous-flow selective photo-production of acetone

  • Caudillo-Flores, Uriel
  • Rodríguez-Padrón, Daily
  • Muñoz-Batista, M.J.
  • Kubacka, Anna
  • Luque, R.
  • Fernández García, Marcos
In this work versatile boron-carbon nitride composite materials were synthesized and utilized in a sustainable process using sunlight as the energy source for the continuous-flow selective photocatalytic production of acetone from 2-propanol. It is worth highlighting that the sample preparation was carried out by an environmentally friendly strategy, without a solvent or additional reagents. Samples containing boron in 1-10 wt% were subjected to physico-chemical characterization using XRD, porosimetry, UV-visible spectroscopy, TEM, energy-dispersive X-ray spectroscopy and XPS. The reaction output was analyzed on the basis of the reaction rate, selectivity and quantum efficiency of the process. A correlation analysis between catalytic properties with two observables, the boron phase distribution in the materials and charge handling efficiency (measured using photoluminescence), rationalizes photoactivity. Such an analysis indicates that the presence of an amorphous boron metallic phase and its contact with the carbon nitride component are key to setting up a renewable and easily scalable chemical process to obtain acetone. © 2020 The Royal Society of Chemistry., Financial support from MINECO (Spain; ENE2016-77798-C4-1-R grant), CSIC and the Secretaria de Ciencia Tecnología e Innovacion of CDMX (SECTEI, Mexico) is gratefully acknowledged. M. Fernández-García acknowledges the fruitful general discussions with Prof. F. Fernández-Martín. M. J. Muñoz-Batista thanks the “Plan Propio de Investigación-Proyectos de investigación precompetitivos para Jóvenes Investigadores” from UGR. Rafael Luque gratefully acknowledges MINECO for funding the project CTQ2016-78289-P, co-financed with FEDER funds. Daily Rodriguez-Padron also gratefully acknowledges MINECO for providing a research contract under the same project. The publication has been prepared with support from the RUDN University Program 5-100., Peer reviewed