Skip to main content

OBTENCION DE HIDROGENO VERDE MEDIANTE REFORMADO CATALITICO EN FASE LIQUIDA DE COMPUESTOS DERIVADOS DE LA BIOMASA

PID2020-113809RB-C33

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2020
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE CADIZ

Resultados relacionados

Resultados totales (Incluyendo duplicados): 25
Encontrada(s) 1 página(s)

Docta Complutense
Publication Artículo científico (JournalArticle)

Enhanced photocatalysis by defect-engineered CeO2 with sulfite activation under visible light irradiation

  • Han, Yaning
  • Chen, Xiaowei
  • Tinoco Rivas, Miguel
  • Fernández García, Susana
  • Hungría, Ana Belén
  • Li, Youxun
  • Nai, Jiyuan
  • Wu, Ren'an
  • Aguinaco, Almudena
  • Blanco, Eduardo
  • Calvino, José Juan
  • Jiang, Lei
Sulfite-based advanced oxidation processes (s-AOPs) have recently garnered significant attention due to their ability to generate highly oxidative sulfate radicals and eliminate contaminants from water. A state-of-the-art platform has been developed through the synergistic combination of s-AOP and photocatalysis under visible light as weak as ambient indoor daylight. This platform achieved an enhanced degradation efficiency for defect-engineered CeO2 nanocubes by using sodium sulfite instead of SO2, resulting in a synergy factor of up to 88%. The reaction pathways, intermediates, ion leaching and the possible influence of aqueous conditions during the methyl orange degradation have been investigated. The CeO2/Na2SO3/vis-light platform exhibits promising prospect as a system to enhance conventional s-AOP in wastewater treatment or disinfection. It demonstrates excellent performance in terms of pH sensitivity, anion influence, and resistance to leaching. This highlights its significant potential for practical applications and future process scale-up.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Multi-functional oxidase-like activity of praseodymia nanorods and nanoparticles

  • Lei, Jiang
  • Han, Yaning
  • Fernández García, Susana
  • Tinoco Rivas, Miguel
  • Li, Zhuang
  • Nan, Pengli
  • Sun, Jingtao
  • Delgado Jaén, Juan José
  • Pan, Huiyan
  • Blanco Montilla, Ginesa
  • Martínez López, Francisco Javier
  • Hungría Hernández, Ana Belén
  • Calvino Gámez, José Juan
  • Chen, Xiaowei
The ability to mimic protein-based oxidase with multi-functional inorganic nanozymes would greatly advance biomedical and clinical practices. Praseodymia (PrOx) nanorods (NRs) and nanoparticles (NPs) have been synthesized using hydrothermal and precipitation methods. Both PrOx catalysts with different morphologies exhibit significantly higher oxidase-like activities (Michaelis-Menten constant Km ≤ 0.026 mM) than commercial PrOx and most so-far-reported artificial enzymes. One of the substrates, dopamine, can be oxidized and further polymerized to generate polydopamine in acidic conditions. Akin to CeO2, which is a well-studied nanozyme, a different mechanism involving holes+, oxygen vacancies and oxygen mobility over PrOx catalysts has been proposed in this work. However, fluoride ions were found to impose opposite effects on the oxidase-mimicking activity of PrOx and CeO2, implying a promising path for the exploration of new nanozymes. In support of this, PrOx was further applied in colorimetric sensing of L-cysteine and fluoride with high sensitivity.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Split-Type Assay for Wide-Range Sensitive Sensing of Ochratoxin A with Praseodymia Nanorods

  • Jiang, Lei
  • Han, Yaning
  • Li, Youxun
  • Li, Zhuang
  • Zhu, Xiudong
  • Liu, Zhibin
  • Chen, Yuxue
  • Fernández-Garcia, Susana
  • Tang, Yongjiao
  • Chen, Xiaowei
The ubiquitous presence of ochratoxin A (OTA), a toxic food contaminant, requires development of fast and sensitive detection tools. However, it is difficult to find a method that can address high sensitivity and wide detection range simultaneously. In this work, a sensing platform composed of praseodymia nanorods (Pr6O11-NRs) and aptamers for OTA is established. Under the dual-readout modes, this platform provides a highly sensitive detection of OTA with extra-wide range, over three orders of magnitude with limit of detection (LOD) of 0.8 ng/mL. Both fluorometric and colorimetric signals were obtained because of the excellent fluorescent quenching and oxidase-like activity of Pr6O11-NRs. This probe enables a detection range of OTA which covers the maximum acceptable levels of most foods. Real samples were tested with this method, demonstrating high sensitivity and good recoveries. This sensing strategy has great potential for an expanded application in point-of-care detection of other toxins via portable devices.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

NO Oxidation on Lanthanum-Doped Ceria Nanoparticles with Controlled Morphology

  • Fernández García, Susana
  • Tinoco, Miguel
  • Hungría Hernández, Ana Belén
  • Chen, Xiaowei
  • Calvino Gámez, José Juan
  • Martínez Munuera, Juan Carlos
  • Giménez Mañogil, Javier
  • García García, Avelina
The present work aims to assess the impact of morphology and reducibility on lanthanum-doped ceria nanocatalysts with controlled morphology on the NO oxidation reaction. Specifically, samples were prepared using a hydrothermal method incorporating lanthanum at varying molar concentrations (0, 5, 10, and 15 mol.%) into ceria with a controlled morphology (nanocubes and nanorods). The structural, compositional, and redox characterization of these catalysts has been performed via scanning transmission electron microscopy (STEM), X-ray diffraction (XRD), X-ray energy dispersive spectroscopy (X-EDS), inductively coupled plasma (ICP), hydrogen temperature-programmed reduction (H2-TPR), and oxygen storage capacity (OSC). NO oxidation catalytic tests were conducted, and the results were compared with estimated curves (obtained by considering the proportions of the corresponding components), which revealed the presence of a synergistic effect between lanthanum and ceria. The degree of enhancement was found to depend on both the morphology and the amount of lanthanum incorporated into CeO2. These findings may facilitate the optimization of features concerning ceria-based nanocatalysts for the removal of NOx emissions from exhaust gases., 16 páginas
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Reduced Tiara-like Palladium Complex for Suzuki Cross-Coupling Reactions

  • Daka, Mario
  • Montini, Tiziano
  • Pengo, Paolo
  • Marussi, Giovanna
  • Crosera, Matteo
  • Adami, Gianpiero
  • Delgado Jaén, Juan José
  • Giambastiani, Giuliano
  • Fertey, Pierre
  • Fonda, Emiliano
  • Pasquato, Lucia
  • Fornasiero, Paolo
The design of highly active and structurally well-defined catalysts has become a crucial issue for heterogeneous catalysed reactions while reducing the amount of catalyst employed. Beside conventional synthetic routes, the employment of polynuclear transition metal complexes as catalysts or catalyst precursors has progressively intercepted a growing interest. These well-defined species promise to deliver catalytic systems where a strict control on the nuclearity allows to improve the catalytic performance while reducing the active phase loading. This study describes the development of a highly active and reusable palladium-based catalyst on alumina (Pd8/Al2O3) for Suzuki cross-coupling reactions. An octanuclear tiara-like palladium complex was selected as active phase precursor to give isolated Pd-clusters of ca. 1 nm in size on Al2O3. The catalyst was thoroughly characterised by several complementary techniques to assess its structural and chemical nature. The high specific activity of the catalyst has allowed to carry out the cross-coupling reaction in 30 min using only 0.12 mol % of Pd loading under very mild and green reaction conditions. Screening of various substrates and selectivity tests, combined with recycling and benchmarking experiments, have been used to highlight the great potentialities of this new Pd8/Al2O3 catalyst. © 2023 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Induced-aggregates in photocatalysis: An unexplored approach to reduce the noble metal co-catalyst content

  • Bu, Enqi
  • Chen, Xiaowei
  • López Cartes, Carlos
  • Monzón, Antonio
  • Delgado Jaén, Juan José
Photocatalysis has emerged as a promising and environmentally sustainable solution to produce high-purity hydrogen through ethanol photoreforming. It is commonly accepted that adding co-catalysts, especially noble metals, significantly enhances the catalytic activity of semiconductors. However, the high cost of noble metals such as Pt may limit the real application of this emerging technology. Here we evaluate the possibility of reducing the noble metal loading by creating the appropriate interface between pre-formed semiconductor nanoparticles. Commercial titania (P25) was selected as the semiconductor due to its commercial availability, facilitating the straightforward validation and corroboration of our results. Pt was selected as co-catalyst because one of the most efficient photocatalysts for the ethanol photo-reforming is still based on the use of P25 in combination with Pt. We report that the creation of induced aggregates dramatically improves the total hydrogen produced when very low loadings (≤0.05 wt%) of Pt are used. We have developed a pioneering reactor designed for conducting photoluminescence studies under authentic operational conditions of nanoparticle suspensions in the liquid phase. This approach allows us to obtain the average photoluminescence emission from the P25 agglomerates what it would be impossible to obtain by using standard solid samples holders. Thanks to this equipment, we can conclude that this remarkable improvement of the activity is mainly due to creation of an interface that favors the charge transfer between the particles of the aggregates. According to this, the titania nanoparticles of the agglomerates act as an antenna to collect the photons of the sun-light and produce the photo-excited electrons that will be transferred to the platinum nanoparticles located in the same agglomeration. In contrast, raw P25 with low loadings of Pt would have a high number of titania nanoparticles without platinum, and therefore, inactive. This result would be especially relevant in the case of immobilized photocatalytic systems for real future photocatalytic reactors because the immobilization of the semiconductors would generate similar interactions to the one created by our method. Consequently, the initial semiconductor immobilization followed by the subsequent photo-deposition of the co-catalyst emerges as a promising approach for a substantial reduction of the co-catalyst content.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Investigation on the Structure and Performance of Supported Ni Nanoparticles for the Hydrogenation of Furfural

  • Chen, Xiaowei
  • Alijani, Shahram
  • Gallarati, Simone
  • Tessore, Francesca
  • Delgado Jaén, Juan José
  • Gianolio, Diego
  • Villa, Alberto
  • Arrigo, Rosa
In this study, nickel (Ni) nanoparticles were successfully synthesised using two methods: the hot-injection method and a room temperature colloidal synthesis using dioctyl tartrate as a capping agent. Each approach yielded Ni nanoparticles with unique morphological and electronic properties. The distinct characteristics of these Ni nanoparticles make them promising candidates for unravelling structure/activity relationships, a crucial aspect in developing catalysts with enhanced selectivity. Furthermore, Ni nanoparticles synthesized via these methods were supported on both silica and activated charcoal, with variations in Ni loadings. We explored the impact of nanostructural characteristic of the Ni NPs as well as support effects on the selective hydrogenation of furfural. Using temperature programmed reduction, advanced X-ray absorption spectroscopy, and atom-resolved electron microscopy techniques, we established comprehensive structure-function relationships. Herein, we demonstrate that using a dioctyl tartrate route, foam-like Ni nanostructures are obtained, yielding higher selectivity towards selective hydrogenation than commercial Ni/Al2O3 and a suppression of the acid-base catalysed acetalization and etherification reactions. Furthermore, conversions similar to commercial Ni/Al2O3 are achieved using a lower Ni loading. These insights provide valuable guidance for the design of enhanced materials, contributing to the optimization of catalyst performance in selective hydrogenation processes. This research marks a significant step toward the development of more efficient and sustainable catalytic processes.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Improved electrocatalytic activity of Pt on carbon nanofibers for glucose oxidation mediated by support oxygen groups in Pt perimeter

  • Van der Ham, M.P.J.M.
  • Hersbach, T.J.P.
  • Delgado Jaén, Juan José
  • Matson, B.D.
  • Lim, J.
  • Führer, M.
  • Van Haasterecht, T.
  • Verhoeven, M.W.G.M.
  • Hensen, E.J.M.
  • Sokaras, D.
  • Koper, M.T.M.
  • Bitter, J.H.
Support effects in supported metal catalysts are well studied for thermocatalytic reactions, but less studied for electrocatalytic reactions. Here, we prepared a series of Pt supported on carbon nanofiber catalysts which vary in their Pt particle size and the content of oxygen groups on the surface of the CNF. We show that the activity of these catalysts for electrocatalytic glucose oxidation relates linearly with the content of support oxygen groups. Since the electronic state of Pt (XAS) and Pt surface structure (CO-stripping) were indistinguishable for all materials, we conclude that sorption effects of glucose play a crucial role in catalytic activity. This was further confirmed by establishing a relation between the annulus of the Pt particles and the activity
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Enhanced stability of sub-nanometric iridium decorated graphitic carbon nitride for H2 production upon hydrous hydrazine decomposition†

  • Bellomi, Silvio
  • Barlocco, Ilaria
  • Chen, Xiaowei
  • Delgado Jaén, Juan José
  • Arrigo, Rosa
  • Dimitratos, Nikolaos
  • Roldan, Alberto
  • Villa, Alberto
Stabilizing metal nanoparticles is vital for large scale implementations of supported metal catalysts, particularly for a sustainable transition to clean energy, e.g., H2 production. In this work, iridium sub-nanometric particles were deposited on commercial graphite and on graphitic carbon nitride by a wet impregnation method to investigate the metal-support interaction during the hydrous hydrazine decomposition reaction. To establish a structure-activity relationship, samples were characterized by transmission electron microscopy and X-ray photoelectron spectroscopy. The catalytic performance of the synthesized materials was evaluated under mild reaction conditions, i.e. 323 K and ambient pressure. The results showed that graphitic carbon nitride (GCN) enhances the stability of Ir nanoparticles compared to graphite, while maintaining remarkable activity and selectivity. Simulation techniques including Genetic Algorithm geometry screening and electronic structure analyses were employed to provide a valuable atomic level understanding of the metal-support interactions. N anchoring sites of GCN were found to minimise the thermodynamic driving force of coalescence, thus improving the catalyst stability, as well as to lead charge redistributions in the cluster improving the resistance to poisoning by decomposition intermediates., 15 páginas
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Effect of the TiO2-carbon interface on charge transfer and ethanol photo-reforming

  • Bu, Enqi
  • Chen, Xiaowei
  • López Cartes, Carlos
  • Cazaña, Fernando
  • Monzón, Antonio
  • Martínez López, Francisco Javier
  • Delgado Jaén, Juan José
Carbonaceous materials have been widely used in photocatalysis to solve the drawback of rapid electron-hole recombination rate of semiconductors such as titania. To further understand the charge separation mechanism and its effect on the ethanol photoreforming hydrogen production, two types of carbon-titania hybrid material systems were studied. One of them is multi-walled carbon nanotube-titania nanoparticles (MWCNT-TiO2) prepared by a sol-gel synthesis method, which according to previous studies should facilitate the migration of electrons from TiO2 to MWCNT. The second system is based on a two-dimensional carbon (exfoliated carbon, 2DC) and titania nanosheet (TNS), synthesized through a hydrothermal route that enabled the formation of strong interaction between the carbon and the {001} facets of the TNS. Our results demonstrate that this unique design promotes the migration of the photogenerated holes from the TNS to the expanded carbon. Steady state photoluminescence studies indicate that the recombination rate in both cases decreases benefiting from the spatial separation of photogenerated carriers, resulting in enhanced photocatalytic activity. The present study provides a comprehensive understanding of the charge separation mechanism and its effect on ethanol photoreforming hydrogen production in carbon-titania hybrid material systems and clearly highlights the need for further research to investigate the charge transfer in these kinds of hybrid materials.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

PdCu nanoalloy decorated photocatalysts for efficient and selective oxidative coupling of methane in flow reactors

  • Li, Xiyi
  • Wang, Chao
  • Yang, Jianlong
  • Xu, Youxun
  • Yang, Yi
  • Yu, Jiaguo
  • Delgado Jaén, Juan José
  • Martsinovich, Natalia
  • Sun, Xiao
  • Zheng, Xu-Sheng
  • Huang, Weixin
  • Tang, Junwang
Methane activation by photocatalysis is one of the promising sustainable technologies for chemical synthesis. However, the current efficiency and stability of the process are moderate. Herein, a PdCu nanoalloy (~2.3 nm) was decorated on TiO2, which works for the efficient, stable, and selective photocatalytic oxidative coupling of methane at room temperature. A high methane conversion rate of 2480 μmol g−1 h−1 to C2 with an apparent quantum efficiency of ~8.4% has been achieved. More importantly, the photocatalyst exhibits the turnover frequency and turnover number of 116 h−1 and 12,642 with respect to PdCu, representing a record among all the photocatalytic processes (λ > 300 nm) operated at room temperature, together with a long stability of over 112 hours. The nanoalloy works as a hole acceptor, in which Pd softens and weakens C-H bond in methane and Cu decreases the adsorption energy of C2 products, leading to the high efficiency and long-time stability.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Photocatalytic TiO2 nanosheets-SiO2 coatings on concrete and limestone: An enhancement of de-polluting and self-cleaning properties by nanoparticle design

  • Luna Aguilera, Manuel Jesús
  • Delgado Jaén, Juan José
  • Romero Ocaña, Ismael
  • Montini, T.
  • Gil Montero, María Luisa Almoraima
  • Martínez López, Francisco Javier
  • Fornasiero, P.
  • Mosquera Díaz, María Jesús
In this study, we develop TiO2-SiO2 nanocomposites that can be employed as photoactive coatings to create surfaces with antipollution and self-cleaning properties in urban buildings. In particular, anatase titanium dioxide with a high percentage of {001} facets, commonly called titania nanosheet (TNS), was used as active phase. This approach allows us to improve the antipollution properties of similar sols based on P25. The obtained TNS were intensively characterized by UV–Vis diffuse reflectance absorption, X-Ray diffraction and transmission electron microscopy to rationalize the sol synthesis and fully understand the photocatalytic performances. Our results clearly show that after treating the titania nanosheets with NaOH to remove adsorbed residual fluoride from the synthesis, they can be easily dispersed and the photocatalytic activity is dramatically improved. This material has been shown to effectively reduce concentrations of NOx, soot and organic dyes under simulated sun light radiation.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

A 2D copper-imidazolate framework without thermal treatment as an efficient ORR electrocatalyst for Zn-air batteries

  • Franco, Ana
  • Salatti-Dorado, José Ángel
  • García-Caballero, Valentín
  • Lorca, Sebastián
  • Camacho, Luis
  • Cano, Manuel
  • Fernández- Romero, Antonio J.
  • Delgado Jaén, Juan José
  • Giner-Casares, Juan J.
  • Carrillo-Carrión, Carolina
To face unmet energy demands, the search for more stable, low-cost, and scalable electrocatalyst materials is imperative. Within this context, single-atom catalysts (SACs) have drawn considerable attention due to their maximum atom utilization. With this idea in mind, we have synthesized a new ultrathin and water-stable 2D Cu-based metal-organic framework (2DCIF), which presents a notable electrocatalytic activity for the oxygen reduction reaction (ORR) in alkaline media without the need for calcination, which makes the difference when compared to most MOF-based electrocatalysts. The designed MOF-based SAC consists of single-atom sites (isolated and accessible Cu) coordinated to imidazole carboxylic ligands, giving rise to Cu-N4O actives sites confined in a 2D-nanostructured network. This unique structure, along with the ultrathin nanosheets that favor mass transport and electrical conductivity, and the high chemical stability of these 2DCIFs are the key features that endow them with excellent performance in the ORR, which occurs via a direct four-electron transfer pathway, with an onset potential of 0.86 V vs. RHE and a maximum current density of 6.4 mA cm(-2). These good catalytic properties of 2DCIFs have allowed their use as efficient air electrodes in alkaline flooded and all-solid-state Zn-air batteries. In the former case, 2DCIF-based air electrodes presented a specific power density of 91.2 kW cm(-2) kg(-1) and a specific capacity of 296.2 A h g(-1), significantly exceeding the specific capacity values reported previously for other Cu-based catalysts. Besides, the specific capacity increased to 389.1 A h g(-1) when 2DCIFs were tested in an all-solid-state Zn-air battery., C. C.-C. acknowledges the financial support by Spanish Ministry of Science, Innovation and Universities (MICINN) and the Spanish Research Agency (AEI) through the "Ramon y Cajal" programme (RYC-2019-027527-I) and PID2019-107665RJ-I00 project. C. C.-C. also acknowledges funding of the University of Seville through the "VI Plan Propio de Investigacion y Transferencia de la US" (VIPPIT-2020-IV.2). A. F. acknowledges MICINN for an FPI contract associated with CTQ2016-78289-P. J. J. G.-C. also received funding from MICINN and AEI through the PID2020-112744GB-I00/AEI/10.13039/501100011033 project. J. J. D thanks MICINN and the Andalusian Government for funding through projects PID2020-113809RB-C33 and the ELECMIC facilities. A. J. F. R. and S. L. thank MICINN and AEI for funding through the PID2019-104272RB-C55/AEI/10.13039/501100011033 project, and Fundacion Seneca-Agencia de Ciencia y Tecnologia de la Region de Murcia for financial support through the 20985/PI/18 project.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Combining Deep Learning and Compressed SensingMethods for the 3D Characterization of Ultra-ThinEpitaxial Layers Grown on Controlled-Shape Nano-Oxides

  • Grzonka, Justyna María
  • Marqueses Rodríguez, José
  • Fernández García, Susana
  • Chen, Xiaowei
  • Calvino Gámez, José Juan
  • López Haro, Miguel
Using a nanostructured platform (a controlled-shape nano-oxide) and conventional wet impregnation techniques, powder-type materials have been prepared in which atomically thin surface layers are deposited under very mild conditions. More importantly, an advanced methodology, combining energy dispersive X-ray spectroscopy-scanning transmission electron tomography (STEM-EDX ET) and deep learning denoising techniques, has been developed for the 3D compositional characterization of these unique nanosystems. The complex case of LaOx-coated CeO2 nanocubes is illustrated. For these, aberration corrected 2D STEM-EDX evidence that ceria nanocubes become covered with a 2–4 atom-thick layer of a La, Ce-mixed oxide with spatially varying composition. However, STEM-EDX ET reveals that this layer distributes unevenly, patching most of the available nanocube surface. The large flexibility and spread availability of the involved synthetic techniques enables, using the tools here developed, a wide exploration of the wealth of questions and applications of these intriguing, atomically thin, surface oxide phases, 10 páginas
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Highly selective oxidation of benzene to phenol with air at room temperature promoted by water

  • Xie, J.
  • Li, X.
  • Guo, J.
  • Luo, L.
  • Delgado Jaén, Juan José
  • Martsinovich, N.
  • Tang, J.
Phenol is one of the most important fine chemical intermediates in the synthesis of plastics and drugs with a market size of ca. $30b1 and the commercial production is via a two-step selective oxidation of benzene, requiring high energy input (high temperature and high pressure) in the presence of a corrosive acidic medium, and causing serious environmental issues2–5 . Here we present a four-phase interface strategy with well-designed Pd@Cu nanoarchitecture decorated TiO2 as a catalyst in a suspension system. The optimised catalyst leads to a turnover number of 16,000–100,000 for phenol generation with respect to the active sites and an excellent selectivity of ca. 93%. Such unprecedented results are attributed to the efficient activation of benzene by the atomically Cu coated Pd nanoarchitecture, enhanced charge separation, and an oxidant-lean environment. The rational design of catalyst and reaction system provides a green pathway for the selective conversion of symmetric organic molecules.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Converting carbon black into an efficient and multi-site ORR electrocatalyst: the importance of bottom-up construction parameters

  • Ribeiro, R.S.
  • Florent, M.
  • Delgado Jaén, Juan José
  • Pereira, M.F.R.
  • Bandosz, T.J.
To boost efficient energy transitions, alternatives to expensive and unsustainable noble metal-based electrocatalysts for the oxygen reduction reaction (ORR) are needed. Having this in mind, carbon black - Black Pearls 2000 (BP) was enriched in active nitrogen-containing centers, including single-atom Fe-N sites surrounded by Fe nanoclusters, through a synthesis methodology employing only broadly available precursors. The methodical approach taken to optimize the synthesis conditions highlighted the importance of (1) a proper choice of the Fe precursor; (2) melamine as an N source to limit the formation of magnetite crystals and modulate the charge density nearby the active sites, and glucose to chelate/isolate Fe atoms and thus allow the Fe-N coordination to be established, with a limiting formation of Fe0 clusters; and (3) a careful dosing of the Fe load. The ORR on the optimized electrocatalyst (Fe0.06-N@BP) proceeds mostly through a four-electron pathway, having an onset potential (0.912 V vs. RHE) and limiting current density (4.757 mA cm−2) above those measured on Pt/C (0.882 V and 4.657 mA cm−2, respectively). Moreover, the current density yielded by Fe0.06-N@BP after 24 h at 0.4 V vs. RHE was still above that of Pt/C at t = 0 (4.44 mA cm−2), making it a promising alternative to noble metal-containing electrocatalysts in fuel cells., 8 páginas
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Understanding the interfacial changes of PtCo3O4 catalysts during the dehydrogenation of ammonia borane

  • Bellomi, Silvio
  • Cano-Blanco, D.C.
  • Han, Yaning
  • Delgado Jaén, Juan José
  • Chen, Xiaowei
  • Lomachenko, K.A.
  • Barlocco, Ilaria
  • Ferri, Davide
  • Roldan, A.
  • Villa, A.
The redox properties of oxides are critical in catalysis and can be modified at the interface between oxides and metals; as a consequence, working catalysts can be reconstructed. Herein, the influence of metal-support interactions on the interface between Pt and Co3O4 was disclosed during the batch ammonia borane decomposition. Co3O4 with and without decorating Pt were compared, and tested against Pt on a non-reducible oxide (PtAl2O3). The kinetic profiles were analysed using kinetic models, and both fresh and used samples were characterised using XRD, XPS, XAS, HR-TEM, CO adsorption by IR, and in situ ATR-IR. The combined study revealed an enhanced reaction rate for PtCo3O4 and its reconstruction under reaction conditions due to metal-support interaction, and disclosed the nature of the stable active sites formed under reaction conditions. Indeed, during the reaction, metallic Pt re-distributed, and the H-spillover to the support reduced the surface of Co3O4, leading to Pt clusters on Co(II)-enriched Co3O4. Atomic-scale insights on the surface redox properties of the catalysts were then obtained through DFT, and the modification of PtCo3O4 was attributed to the facile reduction of octahedral Co(III) ions at the metal/oxide interface, and rationalised as a consequence of charge transfer from Pt to Co3O4.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Hydrothermal synthesis and characterization of Cu-MnOx catalysts for CO oxidation: Effect of Cu:Mn molar ratio on their structure and catalytic activity

  • Pan, Huiyan
  • Chen, Xiaowei
  • Martínez López, Francisco Javier
  • Bu, Enqi
  • Delgado Jaén, Juan José
A comprehensive study was conducted on the synthesis of Cu-MnOx catalysts using a one-pot hydrothermal method followed by a calcination step. These catalysts were thoroughly characterized using techniques such as X-ray diffraction (XRD), X-ray fluorescence (XRF), N2 physisorption, X-ray photoelectron spectroscopy (XPS), temperature programmed desorption and reduction (TPD and TPR), and advanced transmission electron microscopy (TEM). The results revealed that the Cu:Mn molar ratio of the precursors, Cu(NO3)2 and KMnO4, had a significant impact on the crystalline structure and morphology of the synthesized samples. A Cu-doped cryptomelane with a nanorod morphology was observed when the Cu:Mn molar ratio was 0.05. Conversely, a mixture of Cu-doped cryptomelane nanorods, Mn2O3, and Cu1.5Mn1.5O4 spinel nanoparticles was formed at molar ratios of 0.1 and 0.25. The catalytic activities of these catalysts for CO oxidation followed the order: 0.25Cu-MnOx ≈ 0.1Cu-MnOx > 0.05Cu-MnOx > cryptomelane. A good correlation was found between the catalytic performance and reducibility of the catalysts under CO atmosphere that can be related to the ability of the samples to activate the CO molecule. The high reducibility of the sample even at room temperature suggest that the CO oxidation over the synthesized Cu-MnOx catalysts may follow a Mars van Krevelen model
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

NO Oxidation on Lanthanum-Doped Ceria Nanoparticles with Controlled Morphology

  • Fernández-García, Susana
  • Tinoco, Miguel
  • Hungría, Ana Belén
  • Chen, Xiaowei
  • Calvino, Jose J.
  • Martínez-Munuera, Juan Carlos
  • Giménez-Mañogil, Javier
  • Garcia-Garcia, Avelina
  • Garcia-Garcia, Avelina|||/items/808fe91f-4dad-4bdc-9433-6321f321e568
The present work aims to assess the impact of morphology and reducibility on lanthanum-doped ceria nanocatalysts with controlled morphology on the NO oxidation reaction. Specifically, samples were prepared using a hydrothermal method incorporating lanthanum at varying molar concentrations (0, 5, 10, and 15 mol.%) into ceria with a controlled morphology (nanocubes and nanorods). The structural, compositional, and redox characterization of these catalysts has been performed via scanning transmission electron microscopy (STEM), X-ray diffraction (XRD), X-ray energy dispersive spectroscopy (X-EDS), inductively coupled plasma (ICP), hydrogen temperature-programmed reduction (H2-TPR), and oxygen storage capacity (OSC). NO oxidation catalytic tests were conducted, and the results were compared with estimated curves (obtained by considering the proportions of the corresponding components), which revealed the presence of a synergistic effect between lanthanum and ceria. The degree of enhancement was found to depend on both the morphology and the amount of lanthanum incorporated into CeO2. These findings may facilitate the optimization of features concerning ceria-based nanocatalysts for the removal of NOx emissions from exhaust gases.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of the TiO2-carbon interface on charge transfer and ethanol photo-reforming

  • Bu, Enqi
  • Chen, Xiaowei
  • López-Cartes, Carlos
  • Cazaña, Fernando
  • Monzón, Antonio
  • Martínez-López, Javier
  • Delgado, Juan José
Carbonaceous materials have been widely used in photocatalysis to solve the drawback of rapid electron-hole recombination rate of semiconductors such as titania. To further understand the charge separation mechanism and its effect on the ethanol photoreforming hydrogen production, two types of carbon-titania hybrid material systems were studied. One of them is multi-walled carbon nanotube-titania nanoparticles (MWCNT-TiO2) prepared by a sol-gel synthesis method, which according to previous studies should facilitate the migration of electrons from TiO2 to MWCNT. The second system is based on a two-dimensional carbon (exfoliated carbon, 2DC) and titania nanosheet (TNS), synthesized through a hydrothermal route that enabled the formation of strong interaction between the carbon and the {001} facets of the TNS. Our results demonstrate that this unique design promotes the migration of the photogenerated holes from the TNS to the expanded carbon. Steady state photoluminescence studies indicate that the recombination rate in both cases decreases benefiting from the spatial separation of photogenerated carriers, resulting in enhanced photocatalytic activity. The present study provides a comprehensive understanding of the charge separation mechanism and its effect on ethanol photoreforming hydrogen production in carbon-titania hybrid material systems and clearly highlights the need for further research to investigate the charge transfer in these kinds of hybrid materials., Authors would like to thank the support by Ministerio de Ciencia e Innovación (Spain) and Junta de Andalucía through projects PID2020-113809RB-C31, PID2020-113809RB-C33 and PY18-2727. E. Bu would also like to thank the Universidad de Cádiz for FPI-UCA grant (UCA/R93REC/2019)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Stability and performance of BTC-based MOFs for environmental applications

  • Rodríguez Esteban, Corina
  • Ayala, Regla
  • López Cartes, Carlos
Two series of open metal site MOFs, HKUST-1 and MIL-100(Fe), have been successfully prepared using different methods of synthesis. Their features depend on the synthetic route as well as their role play in different environmental applications. The stability and performance of these BTC-based MOFs have been tested bearing in mind Congo Red (CR) removal, humidity adsorption and iodine capture and release. HKUST-1 and MIL-100(Fe) samples could offer a remarkable role in the adsorption of CR from aqueous solutions. However, the lability of HKUST-1 in water is revealed as a drawback for its reutilization in both static and agitation conditions. The former contrasts to the stability under ambient moisture. MIL-100(Fe) shows promising properties in both CR adsorption in aqueous solutions and humidity adsorption. Nonetheless, the performance largely depends on the synthesis conditions. Although CR removal is based on surface interaction, there is a relation between the adsorpted quantity and the specific surface area. The size and nature of iodine allows the diffusion in the pores of both HKUST-1 and MIL-100(Fe) MOFs. This way, the uptake of iodine is driving by the porosity and surface area of samples rather than their inherent nature. As a rule, the results of this work indicate that not only is it important the specific nature of the MOF chosen for a given application but also the way in which it has been synthesized and the conditions in which they are used. MIL-100(Fe)-R is revealed as the best suitable candidate to be used as a sorbent for CR in aqueous solutions, moisture and I2 gas., Financial support for this work has been obtained from the Ministry of Science, Innovation and Universities of Spain (PID2020-113809RB-C33) and the Junta de Andalucía in Spain (PY18-2727)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Induced-aggregates in photocatalysis: An unexplored approach to reduce the noble metal co-catalyst content

  • Bu, Enqi
  • Chen, Xiaowei
  • López-Cartes, Carlos
  • Monzón, Antonio
  • Delgado, Juan José
Photocatalysis has emerged as a promising and environmentally sustainable solution to produce high-purity hydrogen through ethanol photoreforming. It is commonly accepted that adding co-catalysts, especially noble metals, significantly enhances the catalytic activity of semiconductors. However, the high cost of noble metals such as Pt may limit the real application of this emerging technology. Here we evaluate the possibility of reducing the noble metal loading by creating the appropriate interface between pre-formed semiconductor nanoparticles. Commercial titania (P25) was selected as the semiconductor due to its commercial availability, facilitating the straightforward validation and corroboration of our results. Pt was selected as co-catalyst because one of the most efficient photocatalysts for the ethanol photo-reforming is still based on the use of P25 in combination with Pt. We report that the creation of induced aggregates dramatically improves the total hydrogen produced when very low loadings (≤0.05 wt%) of Pt are used. We have developed a pioneering reactor designed for conducting photoluminescence studies under authentic operational conditions of nanoparticle suspensions in the liquid phase. This approach allows us to obtain the average photoluminescence emission from the P25 agglomerates what it would be impossible to obtain by using standard solid samples holders. Thanks to this equipment, we can conclude that this remarkable improvement of the activity is mainly due to creation of an interface that favors the charge transfer between the particles of the aggregates. According to this, the titania nanoparticles of the agglomerates act as an antenna to collect the photons of the sun-light and produce the photo-excited electrons that will be transferred to the platinum nanoparticles located in the same agglomeration. In contrast, raw P25 with low loadings of Pt would have a high number of titania nanoparticles without platinum, and therefore, inactive. This result would be especially relevant in the case of immobilized photocatalytic systems for real future photocatalytic reactors because the immobilization of the semiconductors would generate similar interactions to the one created by our method. Consequently, the initial semiconductor immobilization followed by the subsequent photo-deposition of the co-catalyst emerges as a promising approach for a substantial reduction of the co-catalyst content., Authors would like to thank the support by MINECO (Spain) through projects PID2020-113809RB-C31 and PID2020-113809RB-C33. E. Bu would also like to thank the University of Cadiz for FPI-UCA grant (UCA/R93REC/2019)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Mechanistic insights into the conversion of glucose to formic acid over vanadium-based catalyst

  • Álvarez-Hernández, Débora
  • Ivanova, Svetlana
  • Centeno, Miguel Ángel
Topic name Formic Acid; Carbon Dioxide; Dehydrogenation Prominence percentile 99.103, The catalytic oxidation of biomass-derived compounds represents a promising and sustainable pathway for the production of valuable chemicals, such as formic acid, which is a key candidate for hydrogen storage and CO₂-neutral energy applications. This study investigates the selective oxidation of glucose to formic acid using vanadium oxide supported on titania (VOx/TiO₂) as the catalytic system. This paper elucidates the reaction mechanism and analyzes the product distribution over time under controlled experimental conditions. The system exhibited selective glucose conversion, with formic acid emerging as the primary product, followed by intermediates such as arabinose, glyceraldehyde, acetic acid, and formaldehyde. Mechanistic studies suggested that the selective formation of formic acid proceeds via successive C1–C2 bond cleavage assisted by the peroxo species of vanadium. These findings highlight the key role of molecular and activated oxygen in the reaction pathway, while excluding the direct decomposition pathways for formic acid. This mechanistic insight and the role of vanadium-based peroxo species formed on the catalyst surface provide a critical foundation for optimizing catalyst design for biomass conversion processes., Financial Support was obtained from Spanish Ministerio de Ciencia e Innovación (MCIN/AEI /10.13039/ 501100011033/) grant number [PID2020–113809RB-C32] and FEDER funds., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Effect of the TiO2-carbon interface on charge transfer and ethanol photo-reforming

  • Bu, Enqi
  • Chen, Xiaowei
  • López-Cartes, Carlos
  • Cazaña, Fernando
  • Monzón, Antonio
  • Martínez-López, Javier
  • Delgado, Juan José
Carbonaceous materials have been widely used in photocatalysis to solve the drawback of rapid electron-hole recombination rate of semiconductors such as titania. To further understand the charge separation mechanism and its effect on the ethanol photoreforming hydrogen production, two types of carbon-titania hybrid material systems were studied. One of them is multi-walled carbon nanotube-titania nanoparticles (MWCNT-TiO2) prepared by a sol-gel synthesis method, which according to previous studies should facilitate the migration of electrons from TiO2 to MWCNT. The second system is based on a two-dimensional carbon (exfoliated carbon, 2DC) and titania nanosheet (TNS), synthesized through a hydrothermal route that enabled the formation of strong interaction between the carbon and the {001} facets of the TNS. Our results demonstrate that this unique design promotes the migration of the photogenerated holes from the TNS to the expanded carbon. Steady state photoluminescence studies indicate that the recombination rate in both cases decreases benefiting from the spatial separation of photogenerated carriers, resulting in enhanced photocatalytic activity. The present study provides a comprehensive understanding of the charge separation mechanism and its effect on ethanol photoreforming hydrogen production in carbon-titania hybrid material systems and clearly highlights the need for further research to investigate the charge transfer in these kinds of hybrid materials.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Induced-aggregates in photocatalysis: An unexplored approach to reduce the noble metal co-catalyst content

  • Bu, Enqi
  • Chen, Xiaowei
  • López-Cartes, Carlos
  • Monzón, Antonio
  • Delgado, Juan José
Photocatalysis has emerged as a promising and environmentally sustainable solution to produce high-purity hydrogen through ethanol photoreforming. It is commonly accepted that adding co-catalysts, especially noble metals, significantly enhances the catalytic activity of semiconductors. However, the high cost of noble metals such as Pt may limit the real application of this emerging technology. Here we evaluate the possibility of reducing the noble metal loading by creating the appropriate interface between pre-formed semiconductor nanoparticles. Commercial titania (P25) was selected as the semiconductor due to its commercial availability, facilitating the straightforward validation and corroboration of our results. Pt was selected as co-catalyst because one of the most efficient photocatalysts for the ethanol photo-reforming is still based on the use of P25 in combination with Pt. We report that the creation of induced aggregates dramatically improves the total hydrogen produced when very low loadings (≤0.05 wt%) of Pt are used. We have developed a pioneering reactor designed for conducting photoluminescence studies under authentic operational conditions of nanoparticle suspensions in the liquid phase. This approach allows us to obtain the average photoluminescence emission from the P25 agglomerates what it would be impossible to obtain by using standard solid samples holders. Thanks to this equipment, we can conclude that this remarkable improvement of the activity is mainly due to creation of an interface that favors the charge transfer between the particles of the aggregates. According to this, the titania nanoparticles of the agglomerates act as an antenna to collect the photons of the sun-light and produce the photo-excited electrons that will be transferred to the platinum nanoparticles located in the same agglomeration. In contrast, raw P25 with low loadings of Pt would have a high number of titania nanoparticles without platinum, and therefore, inactive. This result would be especially relevant in the case of immobilized photocatalytic systems for real future photocatalytic reactors because the immobilization of the semiconductors would generate similar interactions to the one created by our method. Consequently, the initial semiconductor immobilization followed by the subsequent photo-deposition of the co-catalyst emerges as a promising approach for a substantial reduction of the co-catalyst content.