Skip to main content

DESARROLLO DE UN SISTEMA INTEGRAL PARA LA ELIMINACION DE LOS CONTAMINANTES GENERADOS POR LOS NUEVOS MOTORES A GASOLINA ALTAMENTE EFICIENTES

PID2019-105542RB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 33
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Exploring the potential of copper-based catalysts for use IN CO OXIDATION reactions IN OXY-FUEL combustion engines

  • Díaz-Verde, A.
  • Martínez-Munuera, J. C.
  • García-García, A.
  • Sanchis, Enrique José|||0000-0002-6856-8992
  • Piqueras, P.|||0000-0002-3767-0839
[EN] Copper/ceria-zirconia (Cu/Ce0.8Zr0.2O2) and copper/perovskite (Cu/BaMnO3) based catalysts have emerged as potential materials to be included in the formulation of oxidation catalysts for automotive applications, due to their tuneable redox properties, their high oxygen storage capacity and a favourable interaction between CuO and the corresponding supports. In this work, these formulations have been synthesised and tested as catalysts for CO oxidation reactions in different oxy-fuel combustion exhaust conditions. Their catalytic performances were compared with those obtained under conventional combustion conditions. The results showed that the copper/ ceria-zirconia catalysts exhibited better catalytic performances than the perovskite-based ones in both exhaust conditions, which also promoted a high resistance to inhibition by the presence of CO2. Furthermore, Cu(6 %)/Ce0.8Zr0.2O2 exhibited the best catalytic performance in all the cases studied, showing an even better behaviour than the noble metal reference Pt(1 %)/Al2O3 under selected boundary conditions lambda = 1., This study was funded by the Spanish Agencia Estatal de Investigacion (MCIN/AEI/10.13039/501100011033) and by European Union NextGenerationEU/PRTR through Grants PDC2021-120821-I00 and PID2019-105542RB-I00 and by Generalitat Valenciana (PROMETEO CIPROM/2021/070 project) . The authors acknowledge Veronica Torregrosa-Rivero for supplying the perovskite-based catalyst and some of its characterization data.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Unraveling the nature of active sites onto copper/ceria-zirconia catalysts for low temperature CO oxidation

  • Martínez-Munuera, J.C.
  • Serrano-Martínez, V.M.
  • Giménez-Mañogil, J.
  • Yeste Siguenza, María del Pilar
  • García-García, A.
The aim of this research is an attempt to shed some light on the understanding of the nature of the active sites and the generated synergies in the copper/ceria-zirconia formulations for low temperature CO oxidation by means of the creation of copper entities with different physico-chemical nature. For this reason, several CuOx/ceria-zirconia catalysts, with different Cu contents and different methods to incorporate copper species, were synthesized. Focus was specially put in this case trying to link the results of CO oxidation catalytic tests with the CO-temperature programmed reduction profiles/approximate estimations and selected characterization parameters in order to find out correlations among catalysts' properties/reducibility and catalytic behaviors, especially those corresponding to the nature and roles of the different CuOx species in contact with ceria-based support on catalytic activity. Results reveal a significant improvement in CO conversion compared to the ceria-zirconia support by adding a small amount of copper loading (as low as 0.5 %), emphasizing the paramount role of copper incorporated by the method of IWI. From 0.5 up to 2% of copper loading, an interesting increase gradual trend in activity and reducibility can be noted. It should be mentioned that all the catalysts obtained by this procedure are more catalytically active towards CO oxidation than 1%Pt/Al2O3 at low temperatures (T < 130 degrees C). CO-TPR results show that the reducibility of these catalysts is in line with their CO oxidation activity. The method of preparation has been revealed as a critical variable in the catalytic performance, and quite similar catalytic activities can be reached from different synthesis methods and different copper contents, due to the similar nature and type of CuOx species generated over the catalysts' surface, identified by the CO-TPR profiles and the rest of characterization data. Finally, IWI method seems to be the best one among those tested, thus combining superior areas of both alpha and beta contributions assigned on CO-TPR profiles, which seem to be critical in the interpretation of the catalytic behaviors.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

NO Oxidation on Lanthanum-Doped Ceria Nanoparticles with Controlled Morphology

  • Fernández García, Susana
  • Tinoco, Miguel
  • Hungría Hernández, Ana Belén
  • Chen, Xiaowei
  • Calvino Gámez, José Juan
  • Martínez Munuera, Juan Carlos
  • Giménez Mañogil, Javier
  • García García, Avelina
The present work aims to assess the impact of morphology and reducibility on lanthanum-doped ceria nanocatalysts with controlled morphology on the NO oxidation reaction. Specifically, samples were prepared using a hydrothermal method incorporating lanthanum at varying molar concentrations (0, 5, 10, and 15 mol.%) into ceria with a controlled morphology (nanocubes and nanorods). The structural, compositional, and redox characterization of these catalysts has been performed via scanning transmission electron microscopy (STEM), X-ray diffraction (XRD), X-ray energy dispersive spectroscopy (X-EDS), inductively coupled plasma (ICP), hydrogen temperature-programmed reduction (H2-TPR), and oxygen storage capacity (OSC). NO oxidation catalytic tests were conducted, and the results were compared with estimated curves (obtained by considering the proportions of the corresponding components), which revealed the presence of a synergistic effect between lanthanum and ceria. The degree of enhancement was found to depend on both the morphology and the amount of lanthanum incorporated into CeO2. These findings may facilitate the optimization of features concerning ceria-based nanocatalysts for the removal of NOx emissions from exhaust gases., 16 páginas
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

CO oxidation under lean and stoichiometric conditions over ceria-zirconia with very low metal contents (Cu, Co, Ag and Pt)

  • Martínez Munuera, Juan Carlos
  • Yeste Siguenza, María del Pilar
  • García García, A.
In this work, several ceria-zirconia based catalysts with very low (and equimolar) metal contents were prepared, characterised and tested for the CO oxidation reaction (under lean and stoichiometric conditions), trying to emulate those conditions found in a diesel oxidation catalyst (DOC) system from a diesel engine and those encountered under gasoline exhaust (l ¼ 1). The metals chosen are Cu, Co, Ag and Pt (as a reliable benchmark). The results reveal enormous differences among reducibility and catalytic activity despite quite similar structural and textural properties of the catalysts, showing differences among dispersion (Ag-catalyst seems to present a low level of dispersion). This catalyst seems to be characterised, as well, by a strong electronic interaction between Ce and Ag centres which is suggested to yield an improved reducibility under H2-TPR conditions. Nevertheless, the order in catalytic activity (Cu > Ag > Co zPt>>support) seems not to follow the order found in reducibility and the Cu-catalyst seems to be the most active independently on the reaction conditions, yielding nearly overlapped CO oxidation catalytic curves. Interestingly, a strong correlation between the catalytic activity under the two conditions tested and the OSC values of the Ce0.8Zr0.2O2-supported metal catalysts is found. Therefore, OSC parameter measured at 150 C can be used as a relevant descriptor to evaluate the CO oxidation activity at low and medium conversions for the investigated catalysts, much better than the H2-TPR measurements.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Improving the Performance of BaMnO3 Perovskite as Soot Oxidation Catalyst Using Carbon Black during Sol-Gel Synthesis

  • Torregrosa-Rivero, Verónica
  • Sánchez-Adsuar, María Salvadora
  • Illán-Gómez, María José
  • Illán-Gómez, María José|||/items/c60edb64-b18b-4119-bf4b-4dae3cc71c22
  • Sánchez-Adsuar, María Salvadora|||/items/de555fe8-1c05-47d8-a8a3-069794d12f14
A series of BaMnO3 solids (BM-CX) were prepared by a modified sol-gel method in which a carbon black (VULCAN XC-72R), and different calcination temperatures (600–850 °C) were used. The fresh and used catalysts were characterized by ICP-OES, XRD, XPS, FESEM, TEM, O2-TPD and H2- TPR-. The characterization results indicate that the use of low calcination temperatures in the presence of carbon black allows decreasing the sintering effects and achieving some improvements regarding BM reference catalyst: (i) smaller average crystal and particles size, (ii) a slight increase in the BET surface area, (iii) a decrease in the macropores diameter range and, (iv) a lower temperature for the reduction of manganese. The hydrogen consumption confirms Mn(III) and Mn(IV) are presented in the samples, Mn(III) being the main oxidation state. The BM-CX catalysts series shows an improved catalytic performance regarding BM reference catalyst for oxidation processes (NO to NO2 and NO2-assisted soot oxidation), promoting higher stability and higher CO2 selectivity. BM-C700 shows the best catalytic performance, i.e., the highest thermal stability and a high initial soot oxidation rate, which decreases the accumulation of soot during the soot oxidation and, consequently, minimizes the catalyst deactivation.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Exploring the potential of copper-based catalysts for use IN CO OXIDATION reactions IN OXY-FUEL combustion engines

  • Díaz Verde, Álvaro
  • Sanchis, Enrique José
  • Martínez-Munuera, Juan Carlos
  • Garcia-Garcia, Avelina
  • Piqueras, Pedro
  • Díaz Verde, Álvaro|||/items/cd6c7340-fb5a-431d-be4e-8bde8df84857
  • Garcia-Garcia, Avelina|||/items/808fe91f-4dad-4bdc-9433-6321f321e568
Copper/ceria-zirconia (Cu/Ce0.8Zr0.2O2) and copper/perovskite (Cu/BaMnO3) based catalysts have emerged as potential materials to be included in the formulation of oxidation catalysts for automotive applications, due to their tuneable redox properties, their high oxygen storage capacity and a favourable interaction between CuO and the corresponding supports. In this work, these formulations have been synthesised and tested as catalysts for CO oxidation reactions in different oxy-fuel combustion exhaust conditions. Their catalytic performances were compared with those obtained under conventional combustion conditions. The results showed that the copper/ceria-zirconia catalysts exhibited better catalytic performances than the perovskite-based ones in both exhaust conditions, which also promoted a high resistance to inhibition by the presence of CO2. Furthermore, Cu(6 %)/Ce0.8Zr0.2O2 exhibited the best catalytic performance in all the cases studied, showing an even better behaviour than the noble metal reference Pt(1 %)/Al2O3 under selected boundary conditions λ = 1.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Ba0.9A0.1MnO3 (A = Ce, La, Mg) Perovskite-Type Mixed Oxides: Effect of Partial Substitution of Ba on the Catalytic Performance for the Oxidation of CO in Simulated Automobile Exhaust Conditions

  • Ghezali, Nawel
  • Díaz Verde, Álvaro
  • Illán-Gómez, María José
  • Díaz Verde, Álvaro|||/items/cd6c7340-fb5a-431d-be4e-8bde8df84857
  • Illán-Gómez, María José|||/items/c60edb64-b18b-4119-bf4b-4dae3cc71c22
BaMnO3 (BM) and Ba0.9A0.1MnO3 (BM-A) (A = Ce, La or Mg) perovskite-type mixed oxides were synthesized by the aqueous sol–gel method; thoroughly characterized by ICP-OES, XRD, H2-TPR, BET, and O2-TPD; and tested as catalysts for CO oxidation under simulated automobile exhaust conditions. The characterization results indicate that the main effects of the partial substitution of Ba with A-metal in BM perovskite are the maintenance of the hexagonal structure of the perovskite and the increase in reducibility and oxygen mobility. All samples catalyze the CO to CO2 oxidation reaction in the different reactant mixtures employed, showing the best performance for the mixture with the lowest CO/O2 ratio and in the presence of a dopant in the BM perovskite formulation. BM-La is the most active catalyst for improving CO oxidation, as it is the most reducible, and because is able to evolve oxygen at intermediate temperatures.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

NOx Reduction Pathways during LNT Operation over Ceria Containing Catalysts: Effect of Copper Presence and Barium Content

  • Martínez-Munuera, Juan Carlos
  • Giménez-Mañogil, Javier
  • Matarrese, Roberto
  • Castoldi, Lidia
  • Garcia-Garcia, Avelina
  • Garcia-Garcia, Avelina|||/items/808fe91f-4dad-4bdc-9433-6321f321e568
Ceria-based catalysts, with Cu in substitution of noble metals, were studied in a vertical microreactor system under isothermal conditions, where NOx was previously stored, followed by the reduction step conducted under H2. The possible remaining ad-NOx species after the reduction stage, were investigated by Temperature Programmed Desorption in He. In situ DRIFTS was used as a complementary technique for the analysis of the surface species formation/transformation on the catalysts’ surface. Catalysts containing both Ba and Cu were found to be selective in the NOx reduction, producing N2 and minor amounts of NH3 during the reduction step, as well as NO. The different ceria-based formulations (containing copper and/or barium) were prepared and tested at two different temperatures in the NOx reduction (NSR) processes. Their catalytic activities were analyzed in terms of their compositions and have been useful in the elucidation of the possible origin and relevant pathways for NOx reduction product formation, which seems to involve the oxygen vacancies of the ceria-based materials (whose generation seems to be promoted by copper) during the rich step. The scope of this work involves an interdisciplinary study of the impact that catalysts’ formulations (noble metal-free) have on their LNT performance under simulated conditions, thus covering aspects of Materials Science and Chemical Engineering in a highly applied context, related to the development of control strategies for hybrid powertrains and/or the reduction of the impact of cold-start emissions.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Enhancing the Performance of BaxMnO3 (x = 1, 0.9, 0.8 and 0.7) Perovskites as Catalysts for CO Oxidation by Decreasing the Ba Content

  • Díaz Verde, Álvaro
  • Illán-Gómez, María José
  • Díaz Verde, Álvaro|||/items/cd6c7340-fb5a-431d-be4e-8bde8df84857
  • Illán-Gómez, María José|||/items/c60edb64-b18b-4119-bf4b-4dae3cc71c22
Mixed oxides featuring perovskite-type structures (ABO3) offer promising catalytic properties for applications focused on the control of atmospheric pollution. In this work, a series of BaxMnO3 (x = 1, 0.9, 0.8 and 0.7) samples have been synthesized, characterized and tested as catalysts for CO oxidation reaction in conditions close to that found in the exhausts of last-generation automotive internal combustion engines. All samples were observed to be active as catalysts for CO oxidation during CO-TPRe tests, with Ba0.7MnO3 (B0.7M) being the most active one, as it presents the highest amount of oxygen vacancies (which act as active sites for CO oxidation) and Mn (IV), which features the highest levels of reducibility and the best redox properties. B0.7M has also showcased a high stability during reactions at 300 °C, even though a slightly lower CO conversion is achieved during the second consecutive reaction cycle. This performance appears to be related to the decrease in the Mn (IV)/Mn (III) ratio.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Copper Catalysts Supported on Barium Deficient Perovskites for CO Oxidation Reaction

  • Díaz Verde, Álvaro
  • Torregrosa-Rivero, Verónica
  • Illán-Gómez, María José
  • Díaz Verde, Álvaro|||/items/cd6c7340-fb5a-431d-be4e-8bde8df84857
  • Illán-Gómez, María José|||/items/c60edb64-b18b-4119-bf4b-4dae3cc71c22
Mixed oxides with perovskite-type structure (ABO3) present interesting physico-chemical properties to be used as catalyst for atmospheric pollution control. In this work, a series of CuX/Ba0.7MnO3 catalysts (being x: 0, 4, 8 and 12 wt%) has been synthesized, characterized and tested for CO oxidation reaction. All the catalysts were active for CO oxidation in the two reactant mixtures tested: low CO mixture (0.1% CO and 1% O2 in He) and near stoichiometric mixture (1% CO and 1% O2 in He). Copper-free perovskite is the most active catalyst in the less demanding conditions (0.1% CO and 1% O2), as it presents the highest amount of oxygen vacancies working as active sites. However, at higher CO concentrations (1% CO in near stoichiometric mixture), copper-containing catalysts were more active than the perovskite support because, due to the saturation of the oxygen vacancies of perovskites, CuO seems to participate as active site for CO and O2 activation. Cu4/Ba0.7MnO3 and Cu12/Ba0.7MnO3 are more active than Cu8/Ba0.7MnO3 catalyst, since they present a larger amount of active sites on surface. These two copper-containing catalysts present a high stability and recyclability during the reaction at 300 °C in an ideal near stoichiometric mixture (1% CO and 1% O2).
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

NO Oxidation on Lanthanum-Doped Ceria Nanoparticles with Controlled Morphology

  • Fernández-García, Susana
  • Tinoco, Miguel
  • Hungría, Ana Belén
  • Chen, Xiaowei
  • Calvino, Jose J.
  • Martínez-Munuera, Juan Carlos
  • Giménez-Mañogil, Javier
  • Garcia-Garcia, Avelina
  • Garcia-Garcia, Avelina|||/items/808fe91f-4dad-4bdc-9433-6321f321e568
The present work aims to assess the impact of morphology and reducibility on lanthanum-doped ceria nanocatalysts with controlled morphology on the NO oxidation reaction. Specifically, samples were prepared using a hydrothermal method incorporating lanthanum at varying molar concentrations (0, 5, 10, and 15 mol.%) into ceria with a controlled morphology (nanocubes and nanorods). The structural, compositional, and redox characterization of these catalysts has been performed via scanning transmission electron microscopy (STEM), X-ray diffraction (XRD), X-ray energy dispersive spectroscopy (X-EDS), inductively coupled plasma (ICP), hydrogen temperature-programmed reduction (H2-TPR), and oxygen storage capacity (OSC). NO oxidation catalytic tests were conducted, and the results were compared with estimated curves (obtained by considering the proportions of the corresponding components), which revealed the presence of a synergistic effect between lanthanum and ceria. The degree of enhancement was found to depend on both the morphology and the amount of lanthanum incorporated into CeO2. These findings may facilitate the optimization of features concerning ceria-based nanocatalysts for the removal of NOx emissions from exhaust gases.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Improving the Catalytic Performance of BaMn0.7Cu0.3O3 Perovskite for CO Oxidation in Simulated Cars Exhaust Conditions by Partial Substitution of Ba

  • Ghezali, Nawel
  • Díaz Verde, Álvaro
  • Illán-Gómez, María José
  • Díaz Verde, Álvaro|||/items/cd6c7340-fb5a-431d-be4e-8bde8df84857
  • Illán-Gómez, María José|||/items/c60edb64-b18b-4119-bf4b-4dae3cc71c22
The sol–gel method, adapted to aqueous media, was used for the synthesis of BaMn0.7Cu0.3O3 (BMC) and Ba0.9A0.1Mn0.7Cu0.3O3 (BMC-A, A = Ce, La or Mg) perovskite-type mixed oxides. These samples were fully characterized by ICP-OES, XRD, XPS, H2-TPR, BET, and O2–TPD and, subsequently, they were evaluated as catalysts for CO oxidation under different conditions simulating that found in cars exhaust. The characterization results show that after the partial replacement of Ba by A metal in BMC perovskite: (i) a fraction of the polytype structure was converted to the hexagonal BaMnO3 perovskite structure, (ii) A metal used as dopant was incorporated into the lattice of the perovskite, (iii) oxygen vacancies existed on the surface of samples, and iv) Mn(IV) and Mn(III) coexisted on the surface and in the bulk, with Mn(IV) being the main oxidation state on the surface. In the three reactant atmospheres used, all samples catalysed the CO to CO2 oxidation reaction, showing better performances after the addition of A metal and for reactant mixtures with low CO/O2 ratios. BMC-Ce was the most active catalyst because it combined the highest reducibility and oxygen mobility, the presence of copper and of oxygen vacancies on the surface, the contribution of the Ce(IV)/Ce(III) redox pair, and a high proportion of surface and bulk Mn(IV). At 200 °C and in the 0.1% CO + 10% O2 reactant gas mixture, the CO conversion using BMC-Ce was very similar to the achieved with a 1% Pt/Al2O3 (Pt-Al) reference catalyst.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Ceria-based catalysts for NOx removal in NSR processes: A fundamental study of the catalyst modifications explored by in situ techniques

  • Martínez-Munuera, Juan Carlos
  • Giménez-Mañogil, Javier
  • Castoldi, Lidia
  • Lietti, Luca
  • Garcia-Garcia, Avelina
  • Garcia-Garcia, Avelina|||/items/808fe91f-4dad-4bdc-9433-6321f321e568
In this work, a fundamental and systematic study was conducted, leading to a better understanding of the phenomena occurring on the catalyst’s surface during the NOx reduction process in NSR systems. For this purpose, ceria-based catalysts, with Cu in substitution of noble metal, have been synthesized and deeply characterized by means of XRF, XPS, in situ (XRD, Raman spectroscopy and DRIFTS), temperature-programmed reduction under H2 (H2-TPR) and under NO reaction (NO isothermal reaction + NO-TPR). The whole results show the key role of copper to promote the reducibility and the creation of oxygen vacancies, allowing a high NO consumption and fast kinetics of N2O and N2 formation, until the oxygen vacancies consumption takes place. The study of the surface reactions taking place in the formation of adsorbed NOx species and the oxygen vacancies consumption with NO uptake is complex; however, a hydroxyl consumption route is found to be involved. The reduction of NO provided higher levels of N2 at higher temperatures; also, a very high efficiency of the previously created oxygen vacancies was found for this process.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Screening Ba0.9A0.1MnO3 and Ba0.9A0.1Mn0.7Cu0.3O3 (A = Mg, Ca, Sr, Ce, La) Sol-Gel Synthesised Perovskites as GPF Catalysts

  • Ghezali, Nawel
  • Díaz Verde, Álvaro
  • Illán-Gómez, María José
  • Díaz Verde, Álvaro|||/items/cd6c7340-fb5a-431d-be4e-8bde8df84857
  • Illán-Gómez, María José|||/items/c60edb64-b18b-4119-bf4b-4dae3cc71c22
Ba0.9A0.1MnO3 (BM-A) and Ba0.9A0.1Mn0.7Cu0.3O3 (BMC-A) (A = Mg, Ca, Sr, Ce, La) perovskite-type mixed oxides were synthesised, characterised, and used for soot oxidation in simulated Gasoline Direct Injection (GDI) engine exhaust conditions. The samples have been obtained by the sol-gel method in an aqueous medium and deeply characterised. The characterization results indicate that the partial substitution of Ba by A metal in BaMnO3 (BM) and BaMn0.7Cu0.3O3 (BMC) perovskites: (i) favours the hexagonal structure of perovskite; (ii) improves the reducibility and the oxygen desorption during Temperature-Programmed Desorption (O2-TPD) tests and, consequently, the oxygen mobility; (iii) mantains the amount of oxygen vacancies and of Mn(IV) and Mn(III) oxidation states, being Mn(IV) the main one; and (iv) for Ba0.9A0.1Mn0.7Cu0.3O3 (BMC-A) series, copper is partially incorporated into the structure. The soot conversion data reveal that Ba0.9La0.1Mn0.7Cu0.3O3 (BMC-La) is the most active catalyst in an inert (100% He) reaction atmosphere, as it presents the highest amount of copper on the surface, and that Ba0.9Ce0.1Mn0.7Cu0.3O3 (BM-Ce) is the best one if a low amount of O2 (1% O2 in He) is present, as it combines the highest emission of oxygen with the good redox properties of Ce(IV)/Ce(III) and Mn(IV)/Mn(III) pairs.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Tailoring the Composition of BaxBO3 (B = Fe, Mn) Mixed Oxides as CO or Soot Oxidation Catalysts in Simulated GDI Engine Exhaust Conditions

  • Díaz Verde, Álvaro
  • Montilla-Verdú, Salvador
  • Torregrosa-Rivero, Verónica
  • Illán-Gómez, María José
  • Díaz Verde, Álvaro|||/items/cd6c7340-fb5a-431d-be4e-8bde8df84857
  • Illán-Gómez, María José|||/items/c60edb64-b18b-4119-bf4b-4dae3cc71c22
  • Montilla-Verdú, Salvador|||/items/1f60cace-de12-4c2f-b23d-656d1466fe87
Mixed oxides with perovskite-type structure (ABO3) are promising catalysts for atmospheric pollution control due to their interesting and tunable physicochemical properties. In this work, two series of BaxMnO3 and BaxFeO3 (x = 1 and 0.7) catalysts were synthesized using the sol–gel method adapted to aqueous medium. The samples were characterized by μ-XRF, XRD, FT-IR, XPS, H2-TPR, and O2-TPD. The catalytic activity for CO and GDI soot oxidation was determined by temperature-programmed reaction experiments (CO-TPR and soot-TPR, respectively). The results reveal that a decrease in the Ba content improved the catalytic performance of both catalysts, as B0.7M-E is more active than BM-E for CO oxidation, and B0.7F-E presents higher activity than BF for soot conversion in simulated GDI engine exhaust conditions. Manganese-based perovskites (BM-E and B0.7M-E) achieve better catalytic performance than iron-based perovskite (BF) for CO oxidation reaction due to the higher generation of actives sites.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Modified BaMnO3-Based Catalysts for Gasoline Particle Filters (GPF): A Preliminary Study

  • Torregrosa-Rivero, Verónica
  • Sánchez-Adsuar, María Salvadora
  • Illán-Gómez, María José
  • Illán-Gómez, María José|||/items/c60edb64-b18b-4119-bf4b-4dae3cc71c22
  • Sánchez-Adsuar, María Salvadora|||/items/de555fe8-1c05-47d8-a8a3-069794d12f14
Gasoline engines, mainly gasoline direct injection engines (GDI) require, in addition to three-way catalysts (TWC), a new catalytic system to remove the formed soot. Gasoline Particle Filters (GPF) are, among others, a possible solution. BaMnO3 and copper-doped BaMnO3 perovskites seem to be a feasible alternative to current catalysts for GPF. The physical and chemical properties of these two perovskites determining the catalytic performance have been modified using different synthesis routes: (i) sol-gel, (ii) modified sol-gel and iii) hydrothermal. The deep characterization allows concluding that: (i) all samples present a perovskite-like structure (hexagonal), except BMC3 which shows a polytype one (due to the distortion caused by copper insertion in the lattice), and ii) when a low calcination temperature is used during synthesis, the sintering effect decreases and the textural properties, the reducibility and the oxygen mobility are improved. The study of soot oxidation simulating the hardest GDI scenarios reveals that, as for diesel soot removal, the best catalytic performance involves the presence of oxygen vacancies to adsorb and activate oxygen and a labile Mn (IV)/Mn (III) redox pair to dissociate the adsorbed oxygen. The combination of both properties allows the transport of the dissociated oxygen towards the soot.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Impact of hydrothermal treatment and activation atmosphere on the porosity development of activated carbon from date pits

  • Gil-Muñoz, Gema
  • Benguella, Sarra
  • Alcañiz-Monge, Juan
  • Alcañiz-Monge, Juan|||/items/6429c102-4901-4937-ae34-fe47c58de2ef
  • Gil-Muñoz, Gema|||/items/0788cd82-745f-472c-89b5-df98e6198f59
This study explores the production activated carbon from date pits without the use of chemical additives, employing steam and CO2 as activating agents in accordance with green chemistry principles. A novel activation approach is introduced, integrating both agents to enhance porosity development. The study systematically examines the differences in microporosity formation between CO₂ and steam activation, as well as the influence of hydrothermal pretreatment on the final material properties. Activated carbons with high BET surface areas and distinct pore size distributions were synthesized, including predominantly microporous, materials with both micropores and substantial mesopores, and samples exhibiting a pore network comprising micro-, meso- and macropores. The results demonstrate that hydrothermal pretreatment enhances biochar yield increasing it by approximately 25 %. The evolution of the burn-off was found to be dependent on the pretreatment conditions, carbonization temperature, and the activating agent. Notably, the findings suggest that hydrothermal pretreatment influences biochar reactivity in different ways. Despite the similar surface functional group compositions observed in treated and untreated carbons, hydrothermally treated samples unexpectedly exhibited greater hydrophobicity. Additionally, the combined use of CO₂ and steam agents led to a higher burn-off compared to their individual, highlighting a synergistic effect in the activation process.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

New findings regarding the role of copper entity particle size on the performance of Cu/ceria-based catalysts in the CO-PROX reaction

  • Martínez-Munuera, Juan Carlos
  • Giménez-Mañogil, Javier
  • Yeste, María Pilar
  • Hungría, Ana Belén
  • Cauqui, Miguel Ángel
  • Garcia-Garcia, Avelina
  • Calvino, Jose J.
  • Garcia-Garcia, Avelina|||/items/808fe91f-4dad-4bdc-9433-6321f321e568
The preferential oxidation of CO in H2-rich mixtures has been studied using Ce0.8Zr0.2O2-supported Cu catalysts containing increasing amounts of copper [1 wt% (Cu1/CZ), 2 wt% (Cu2/CZ) and 4 wt% (Cu4/CZ)]. The oxide support was prepared by co-precipitation and the copper was incorporated using the wetness impregnation method. The catalysts were characterized using N2 adsorption, XRD, STEM-XEDS, H2-TPR, H2 chemisorption and XPS techniques. In particular, the complementarity of electron microscopy and hydrogen chemisorption techniques was found to be very useful for elucidating one of the most challenging properties of copper catalysts, namely their dispersion. The results show that the Cu1/CZ catalyst is the most active in the CO-PROX reaction at low temperatures (<125 °C), despite having a lower copper content. The results are discussed and correlated with the textural properties of the catalysts and with parameters such as metal dispersion and the binary interfacial active sites.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Optimizing the Catalytic Performance of Ba1−xCexMnO3 and Ba1−xLaxCu0.3Mn0.7O3 Perovskites for Soot Oxidation in Simulated GDI Exhaust Conditions

  • Ghezali, Nawel
  • Díaz Verde, Álvaro
  • Illán-Gómez, María José
  • Díaz Verde, Álvaro|||/items/cd6c7340-fb5a-431d-be4e-8bde8df84857
  • Illán-Gómez, María José|||/items/c60edb64-b18b-4119-bf4b-4dae3cc71c22
Ba1−xCexMnO3 (BM-Cex) and Ba1−xLaxMn0.7Cu0.3O3 (BMC-Lax) perovskite-type mixed oxides were synthesized using the sol–gel method adapted for aqueous media with different values of x (0, 0.1, 0.3, 0.6) to estimate the effect of the degree of the partial substitution of Ba by Ce or La on the structure and properties that are relevant for their use as catalysts for gasoline direct injection (GDI) soot oxidation. The samples were deeply characterized by ICP-OES, XRD, XPS, N2 adsorption, H2-TPR, and O2-TPD, and their potential as catalysts for soot oxidation has been analyzed in various scenarios that replicate the exhaust conditions of a GDI engine. By comparing the catalytic performance for soot oxidation of the two tested series (BM-Cex and BMC-Lax) and in the two conditions used (100% He and 1% O2 in He), it could be concluded that (i) in the absence of oxygen in the reaction atmosphere (100% He), BMC-La0.1 is the best catalyst, as copper is also able to catalyze the soot oxidation; and (ii) if oxygen is present in the reaction atmosphere (1% O2/He), BM-Ce0.1 is the most-active catalyst as it presents a higher proportion of Mn(IV) than BMC-La0.1. Thus, it seems that the addition of an amount of Ce or La higher than that corresponding to x = 0.1 in Ba1−xCexMnO3 and Ba1−xLaxCu0.3Mn0.7O3 does not allow us to improve the catalytic performance of BM-Ce0.1 and BMC-La0.1 for soot oxidation in the tested conditions.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Unusual redox dynamics of Nb in the perovskite LaNbxNi1-XO3 and its impact on the dry catalytic reforming of methane

  • Gil-Muñoz, Gema
  • Alcañiz-Monge, Juan
  • Alcañiz-Monge, Juan|||/items/6429c102-4901-4937-ae34-fe47c58de2ef
  • Gil-Muñoz, Gema|||/items/0788cd82-745f-472c-89b5-df98e6198f59
This study investigates the potential of Nb doping in Ni-based perovskites as a precursor for dry reforming of methane (DRM) applications. X-ray diffraction results indicate that Nb solubility in the LaNiO3 perovskite structure can be up to 25 % of B-sites. Furthermore, X-ray photoelectron spectroscopy (XPS) analysis suggests that the Nb incorporated into the perovskite adopts an unusual oxidation state (+4). The reducibility of Ni on this catalyst is influenced by both factors, which, in turn, affect its activity and catalytic stability during the DRM reaction. The duration of the reduction stage plays a crucial role, with an optimal reduction time identified: shorter reduction times result in lower catalytic activity but higher stability, while longer reduction times lead to higher catalytic activity but reduced stability. Carbon deposition on the surface of Ni nanoparticles is more pronounced in Nb-doped samples.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

CO oxidation under lean and stoichiometric conditions over ceria-zirconia with very low metal contents (Cu, Co, Ag and Pt)

  • Martínez-Munuera, Juan Carlos
  • Yeste, María Pilar
  • Garcia-Garcia, Avelina
  • Garcia-Garcia, Avelina|||/items/808fe91f-4dad-4bdc-9433-6321f321e568
In this work, several ceria-zirconia based catalysts with very low (and equimolar) metal contents were prepared, characterised and tested for the CO oxidation reaction (under lean and stoichiometric conditions), trying to emulate those conditions found in a diesel oxidation catalyst (DOC) system from a diesel engine and those encountered under gasoline exhaust (λ = 1). The metals chosen are Cu, Co, Ag and Pt (as a reliable benchmark). The results reveal enormous differences among reducibility and catalytic activity despite quite similar structural and textural properties of the catalysts, showing differences among dispersion (Ag-catalyst seems to present a low level of dispersion). This catalyst seems to be characterised, as well, by a strong electronic interaction between Ce and Ag centres which is suggested to yield an improved reducibility under H2-TPR conditions. Nevertheless, the order in catalytic activity (Cu > Ag > Co ≈ Pt >> support) seems not to follow the order found in reducibility and the Cu-catalyst seems to be the most active independently on the reaction conditions, yielding nearly overlapped CO oxidation catalytic curves. Interestingly, a strong correlation between the catalytic activity under the two conditions tested and the OSC values of the Ce0.8Zr0.2O2-supported metal catalysts is found. Therefore, OSC parameter measured at 150 °C can be used as a relevant descriptor to evaluate the CO oxidation activity at low and medium conversions for the investigated catalysts, much better than the H2-TPR measurements.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Isotopic study of the influence of oxygen interaction and surface species over different catalysts on the soot removal mechanism

  • Cortés-Reyes, Marina
  • Martínez-Munuera, Juan Carlos
  • Herrera, Concepción
  • Larrubia, M. Ángeles
  • Alemany, Luis J.
  • Garcia-Garcia, Avelina
  • Garcia-Garcia, Avelina|||/items/808fe91f-4dad-4bdc-9433-6321f321e568
In order to improve the catalytic formulations for soot removal in after-treatment emission control technologies for gasoline and diesel engine vehicle, an isotopic study was approached using transitory labeled oxygen response method over model catalysts that allows the unraveling of soot oxidation mechanism. Ce-based materials promote oxygen exchange associated with the high population of lattice oxygen species (O2-) denoted as OI type. The incorporation of praseodymium produces a Pr3+ enrichment that decrease the energy for oxygen release and increase oxygen mobility through surface and subsurface oxygen centers (OII type) depending on the synthesis procedure. For PtBaK catalyst, OIII species are responsible for oxygen exchange. Gas-solid reaction between soot and gas phase molecular oxygen is responsible for direct uncatalyzed soot oxidation. For ceria containing catalysts, low-temperature soot removal takes place through the intervention of lattice atomic species and superoxide species. For DPNR model catalyst, PtBaK/Al2O3, the soot elimination occurs with the intervention OIII type centers. In the presence NO, the assisted and cooperative mechanism due to NO2 and the intervention of the adsorbed nitrate species on the trimetallic catalyst enhances soot removal capacity.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Non-Stoichiometric BaxMn0.7Cu0.3O3 Perovskites as Catalysts for CO Oxidation: Optimizing the Ba Content

  • Díaz Verde, Álvaro
  • Veiga, Emerson Luiz dos Santos
  • Beltrán-Mir, Héctor
  • Illán-Gómez, María José
  • Cordoncillo, Eloísa
  • Díaz Verde, Álvaro|||/items/cd6c7340-fb5a-431d-be4e-8bde8df84857
  • Illán-Gómez, María José|||/items/c60edb64-b18b-4119-bf4b-4dae3cc71c22
In this work, a series of BaxMn0.7Cu0.3O3 samples (x: 1, 0.9, 0.8, and 0.7, BxMC) was synthesized, characterized, and used as catalysts for CO oxidation reaction. All formulations were active for CO oxidation in the tested conditions. A correlation between the electrical conductivity, obtained by impedance spectroscopy, and the reducibility of the samples, obtained by H2-TPR, was observed. The Ba0.8Mn0.7Cu0.3O3 composition (B0.8MC) showed the best catalytic performance (comparable to that of the 1% Pt/Al2O3 reference sample) during tests conducted under conditions similar to those found in the exhaust gases of current gasoline engines. The characterization data suggest the simultaneous presence of a high Mn(IV)/Mn(III) surface ratio, oxygen vacancies, and reduced copper species, these two latter being key properties for ensuring a high CO conversion percentage as both are active sites for CO oxidation. The reaction temperature and the reactant atmosphere composition seem to be the most important factors for achieving a good catalytic performance, as they strongly determine the location and stability of the reduced copper species.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Evaluation of Pr2Zr2-xCexO7±δ pyrochlores as a potential Cu support catalysts for CO oxidation in simulated GDI conditions

  • Veiga, Emerson Luiz dos Santos
  • Díaz Verde, Álvaro
  • Illán-Gómez, María José
  • Beltrán-Mir, Héctor
  • Cordoncillo, Eloísa
  • Díaz Verde, Álvaro|||/items/cd6c7340-fb5a-431d-be4e-8bde8df84857
  • Illán-Gómez, María José|||/items/c60edb64-b18b-4119-bf4b-4dae3cc71c22
This study evaluates the catalytic activity, both as bulk catalysts and as supports for copper catalysts for CO oxidation in a simulated Gasoline Direct Injection Engine (GDI) of two pyrochlores: Pr2Zr2O7 (PZ) and Pr2Zr1.9Ce0.1O7±δ (PZC). These pyrochlores were synthesized by the solvothermal method. XRD, FE-SEM, HR-TEM, XPS, H2-TPR, and O2-TPD characterization techniques were employed to determine the structural, microstructural, and redox properties of the samples. All materials exhibited high catalytic activity for CO oxidation, with Cu-PZC showing the best performance, which is comparable to that of a 1% Pt/Al2O3 commercial catalyst used as a reference. Thus, the synthesized solids could be a promising and cost-effective alternative to noble metal-based catalysts used to control GDI exhaust gas composition.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

NOx Storage on BaTi0.8Cu0.2O3 Perovskite Catalysts: Addressing a Feasible Mechanism

  • Albaladejo-Fuentes, Vicente
  • Sánchez-Adsuar, María Salvadora
  • Anderson, James A.
  • Illán-Gómez, María José
  • Illán-Gómez, María José|||/items/c60edb64-b18b-4119-bf4b-4dae3cc71c22
  • Sánchez-Adsuar, María Salvadora|||/items/de555fe8-1c05-47d8-a8a3-069794d12f14
The NOx storage mechanism on BaTi0.8Cu0.2O3 catalyst were studied using different techniques. The results obtained by XRD, ATR, TGA and XPS under NOx storage–regeneration conditions revealed that BaO generated on the catalyst by decomposition of Ba2TiO4 plays a key role in the NOx storage process. In situ DRIFTS experiments under NO/O2 and NO/N2 show that nitrites and nitrates are formed on the perovskite during the NOx storage process. Thus, it seems that, as for model NSR catalysts, the NOx storage on BaTi0.8Cu0.2O3 catalyst takes place by both “nitrite” and “nitrate” routes, with the main pathway being highly dependent on the temperature and the time on stream: (i) at T < 350 °C, NO adsorption leads to nitrites formation on the catalyst and (ii) at T > 350 °C, the catalyst activity for NO oxidation promotes NO2 generation and the nitrate formation.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

An isotopic study on oxygen uptake/exchange over ceria-praseodymia mixed oxides with pulse experiments using 18O2. Implications on soot combustion activities in the GDI (Gasoline Direct Injection) context

  • Martínez-Munuera, Juan Carlos
  • Cortés-Reyes, Marina
  • Garcia-Garcia, Avelina
  • Garcia-Garcia, Avelina|||/items/808fe91f-4dad-4bdc-9433-6321f321e568
This research work focuses on a preliminary study of the behaviour of several ceria-praseodymia mixed oxides along with three model catalysts under isotopic oxygen pulses at different temperatures in an attempt to investigate their ability to interact with 18O2 (uptaking/releasing/exchanging) with their own lattice oxygen, under conditions which could simulate those existing in GDI exhaust gases. Furthermore, these ceria-praseodymia mixed oxides were studied to explore their responses towards soot combustion under two consecutive 18O2 pulses at 500 oC. It was observed that the capacity of oxygen activation and uptake is very dependent on the nature of the catalyst. Ce1-xPrxO2-δ catalysts present different responses in the O2 activation and uptake processes, as a function of temperature, praseodymium content and method of preparation. Moreover, some of these ceria-praseodymia formulations exhibited high soot combustion activity with a marked intervention of unlabelled active oxygen species during the inert period after the 18O2 pulse.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

BaFe1−xNixO3 Catalysts for NOx-Assisted Diesel Soot Oxidation

  • Montilla-Verdú, Salvador
  • Torregrosa-Rivero, Verónica
  • Díaz Verde, Álvaro
  • Illán-Gómez, María José
  • Díaz Verde, Álvaro|||/items/cd6c7340-fb5a-431d-be4e-8bde8df84857
  • Illán-Gómez, María José|||/items/c60edb64-b18b-4119-bf4b-4dae3cc71c22
  • Montilla-Verdú, Salvador|||/items/1f60cace-de12-4c2f-b23d-656d1466fe87
In this work, it is analyzed the effect of the partial substitution of Fe by Ni in a BaFeO3 perovskite to be used as the catalyst for NOx-assisted diesel soot oxidation. A series of BaFe1−xNixO3 (x = 0, 0.2, 0.4 and 0.8) catalysts have been synthesized by using the sol–gel method. The catalysts have been characterized by ICP-OES, XRD, XPS, O2-TPD, H2-TPR- and TEM. The catalytic activity for NO to NO2 oxidation and NOx-assisted diesel soot oxidation have been determined by Temperature Programmed Reaction experiments (NOx -TPR and Soot-NOx-TPR, respectively) and by isothermal reaction at 450 °C. Ni seems not to be inserted in the BaFeO3 perovskite and, instead of that, BaNiO3 perovskite and NiO are detected on the surface of the perovskite BaFeO3. XPS data reveal the coexistence of Fe(III) and Fe(IV) on the catalyst’s surface (being Fe(III) the main oxidation state) and the presence of oxygen vacancies. All catalysts are active for NO oxidation to NO2, showing BaFeO3 and BaFe0.6Ni0.4O3 the best catalytic performance. BaFe0.6Ni0.4O3 shows the highest proportion of nickel on surface and it combines the highest activity and stability for NOx-assisted diesel soot oxidation. Also, this catalyst presents the highest initial soot oxidation rate which minimizes the accumulation of unreacted soot during reaction.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Unraveling the nature of active sites onto copper/ceria-zirconia catalysts for low temperature CO oxidation

  • Martínez-Munuera, Juan Carlos
  • Serrano-Martínez, Víctor M.
  • Giménez-Mañogil, Javier
  • Yeste, María Pilar
  • Garcia-Garcia, Avelina
  • Garcia-Garcia, Avelina|||/items/808fe91f-4dad-4bdc-9433-6321f321e568
The aim of this research is an attempt to shed some light on the understanding of the nature of the active sites and the generated synergies in the copper/ceria-zirconia formulations for low temperature CO oxidation by means of the creation of copper entities with different physico-chemical nature. For this reason, several CuOx/ceria-zirconia catalysts, with different Cu contents and different methods to incorporate copper species, were synthesized. Focus was specially put in this case trying to link the results of CO oxidation catalytic tests with the CO-temperature programmed reduction profiles/approximate estimations and selected characterization parameters in order to find out correlations among catalysts’ properties/reducibility and catalytic behaviors, especially those corresponding to the nature and roles of the different CuOx species in contact with ceria-based support on catalytic activity. Results reveal a significant improvement in CO conversion compared to the ceria-zirconia support by adding a small amount of copper loading (as low as 0.5 %), emphasizing the paramount role of copper incorporated by the method of IWI. From 0.5 up to 2% of copper loading, an interesting increase gradual trend in activity and reducibility can be noted. It should be mentioned that all the catalysts obtained by this procedure are more catalytically active towards CO oxidation than 1%Pt/Al2O3 at low temperatures (T < 130 °C). CO-TPR results show that the reducibility of these catalysts is in line with their CO oxidation activity. The method of preparation has been revealed as a critical variable in the catalytic performance, and quite similar catalytic activities can be reached from different synthesis methods and different copper contents, due to the similar nature and type of CuOx species generated over the catalysts’ surface, identified by the CO-TPR profiles and the rest of characterization data. Finally, IWI method seems to be the best one among those tested, thus combining superior areas of both α and β contributions assigned on CO-TPR profiles, which seem to be critical in the interpretation of the catalytic behaviors.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Examining the effect of zirconium doping in lanthanum nickelate perovskites on their performance as catalysts for dry methane reforming

  • Gil-Muñoz, Gema
  • Alcañiz-Monge, Juan
  • Alcañiz-Monge, Juan|||/items/6429c102-4901-4937-ae34-fe47c58de2ef
  • Gil-Muñoz, Gema|||/items/0788cd82-745f-472c-89b5-df98e6198f59
This study evaluates the viability of Zr doping in Ni-based perovskites as a precursor for dry reforming of methane (DRM) applications. X-ray diffraction results indicate that the solubility of Zr in the LaNiO₃ perovskite structure can reach up to 25 % on B-sites; however, the formation of new crystalline phases is observed when the Zr content increases to 50 %. The presence of Zr has been found to significantly enhance the catalytic activity of these samples, which exhibit the highest conversions rates despite their reduced Ni content. Furthermore, they demonstrate high temporal stability and an absence of carbonaceous deposit formation. These properties are attributed to a strong interaction between Ni and Zr species. However, excessive SMSI, as observed in Ti-bearing perovskite, may lead to a reduction in catalytic activity. Additionally, it has been observed that the presence of Zr influences the growth mechanism of the carbon nanotubes on Ni, shifting from tip-growth to a pulse-growth mechanism.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Ni-BaMnO3 Perovskite Catalysts for NOx-Assisted Soot Oxidation: Analyzing the Effect of the Nickel Addition Method

  • Montilla-Verdú, Salvador
  • Díaz Verde, Álvaro
  • Torregrosa-Rivero, Verónica
  • Illán-Gómez, María José
  • Díaz Verde, Álvaro|||/items/cd6c7340-fb5a-431d-be4e-8bde8df84857
  • Illán-Gómez, María José|||/items/c60edb64-b18b-4119-bf4b-4dae3cc71c22
  • Montilla-Verdú, Salvador|||/items/1f60cace-de12-4c2f-b23d-656d1466fe87
In this study, we analyzed the role of a series of BaMn1−xNixO3 (x = 0, 0.2, and 0.4) mixed oxide catalysts, synthesized using the sol–gel method, in NOx-assisted diesel soot oxidation. ICP-OES, XRD, XPS, and H2-TPR techniques were used for characterization and Temperature-Programmed Reaction experiments (NOx-TPR and Soot-NOx-TPR), and isothermal reactions at 450 °C (for the most active sample) were carried out to determine the catalytic activity. All samples catalyzed NO and soot oxidation at temperatures below 400 °C, presenting nickel-containing catalysts with the highest soot conversion and selectivity to CO2. However, the nickel content did not significantly modify the catalytic performance, and in order to improve it, two catalysts (5 wt % in Ni) were synthesized via the hydrothermal method (BMN2H) and the impregnation of nickel on a BaMnO3 perovskite as support (M5). The two samples presented higher activity for NO and soot oxidation than BMN2E (obtained via the sol–gel method) as they presented more nickel on the surface (as determined via XPS). BMN2H was more active than M5 as it presented (i) more surface oxygen vacancies, which are active sites for oxidation reactions; (ii) improved redox properties; and (iii) a lower average crystal size for nickel (as NiO). As a consequence of these properties, BMN2H featured a high soot oxidation rate at 450 °C, which hindered the accumulation of soot during the reaction and, thus, the deactivation of the catalyst.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Nanostructured Pr-Rich CexPr1-xO2-δ Mixed Oxides for Diesel Soot Combustion: Importance of Oxygen Lability

  • Mekki, Imene
  • Grzybek, Gabriela
  • Kotarba, Andrzej
  • Garcia-Garcia, Avelina
  • Garcia-Garcia, Avelina|||/items/808fe91f-4dad-4bdc-9433-6321f321e568
Soot combustion experiments with 5%O2/He were conducted using model soot, and four distinct compositions of CexPr1-xO2-δ oxides of varying nominal cerium compositions (x = 0, 0.2, 0.3, and 1) were prepared. The catalyst samples were comprehensively characterized using techniques such as XRD, Raman spectroscopy, HR-TEM, N2 adsorption at −196 °C, XPS, O2-TPD, H2-TPR, and work function measurements. The Pr-rich compositions, ranging from Ce0.3Pr0.7O2-δ to PrO2-δ, resulted in a significant increase in the total evolved O2 amounts and enhanced catalyst reducibility. However, a decrease in the textural properties of the catalysts was noted, which was particularly important for the pure praseodymia under the synthesis route conducted. The catalytic activity was investigated under the two following contact modes of mixing between soot and catalyst: loose and tight. The results revealed that the catalytic performance is associated with the surface contact in tight contact mode and with the combination of surface/subsurface/bulk oxygen mobility and the BET surface area in loose contact mode. Notably, the temperatures estimated at 10% and 50% of the conversion (T10 and T50) parameters were achieved at much lower temperatures than the uncatalyzed soot combustion, even under loose contact conditions. Specifically, the 50% conversion was achieved at 511 °C and 538 °C for Ce0.3Pr0.7O2 and Ce0.2Pr0.8O2, respectively. While no direct correlation between catalytic activity and work function was observed, a significant relationship emerges between work function values and the formation of oxygen vacancies, whatever the conditions used for these measurements. On the other hand, the ability to generate a high population of oxygen vacancies at low temperatures, rather than the direct activation of gas-phase O2, influences the catalytic performance of Pr-doped ceria catalysts, highlighting the importance of surface/subsurface oxygen vacancy generation, which was the parameter that showed a better correlation with the catalytic activity, whatever the soot conversion value or the mode of contact considered.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Analyzing the role of copper in the soot oxidation performance of BaMnO3-perovskite-based catalyst obtained by modified sol-gel synthesis

  • Torregrosa-Rivero, Verónica
  • Sánchez-Adsuar, María Salvadora
  • Illán-Gómez, María José
  • Illán-Gómez, María José|||/items/c60edb64-b18b-4119-bf4b-4dae3cc71c22
  • Sánchez-Adsuar, María Salvadora|||/items/de555fe8-1c05-47d8-a8a3-069794d12f14
A series of BaMn0.7Cu0.3O3 solids were prepared by a modified sol-gel method in which carbon black (VULCAN XC-72R), and different calcination temperatures (BMC3-CX, where X indicates the calcination temperature) have been used. The fresh and used catalysts were characterized by ICP-OES, XRD, XPS, FESEM, TEM, O2-TPD and H2-TPR. The presence of a carbon black during sol-gel synthesis of BMC3 mixed oxide allows diminishing the calcination temperature needed to achieve the perovskite structure, but it hinders the formation of the BaMnO3 polytype. The use of low calcination temperatures during synthesis reduces the sintering effects, and the mixed oxides present lower particle size, slightly higher BET surface areas and macropores with lower diameter than BMC3. The distribution of copper in BMC3-CX catalysts depends on the calcination temperature and copper insertion into the perovskite structure is promoted as the calcination temperature increases. All BMC3-CX catalysts are active for NO to NO2 and NOx-assisted soot oxidation processes, but only BMC3-C600 and BMC3-C700 show higher catalytic activity than BMC3 reference catalyst. BMC3-C600 presents the best performance as it features a high amount of surface copper and oxygen vacancies that increase during reaction. The comparison between the performance of the two best catalysts of the BM-CX series (BM-C700) and the BMC3-CX series (BMC3-C600) suggests that the unique advantage of using copper in the modified sol-gel synthesis is an additional decrease of 100 °C in the calcination temperature used for the synthesis of the best catalyst, which is 700 °C for BM-CX and 600 °C for BMC3-CX.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Electrical conduction mechanism in carbon-ceramic composites

  • Alcañiz Monge, Juan
  • Gil-Muñoz, Gema
  • Trautwein, Guido
  • Reinoso, Santiago
Carbon-ceramic composites (C/Cer) have been prepared by chemical vapor deposition of coal tar pitch onto clay substrates and characterized by thermogravimetric analyses, powder X-ray diffraction, Raman spectroscopy, and scanning and transmission electron microscopies (SEM and TEM). The study of the dc electrical conductivity, together with the determination of the Hall voltage sign, proves that such C/Cer composites are n-type semiconductors. Our results demonstrate that: 1) the mechanism of electrical conduction of C/Cer semiconductors proceeds through the pathways expected for amorphous solids (ie. variable-range hopping and heat-activated pathways at low and high temperatures, respectively); and 2) their transport properties are strongly dependent on the clay components, as evidenced by microscopy experiments., The authors would like to thank the financial support from Ministerio de Ciencia e Innovación (grant No. PID2019-105542RB-I00/AEI/10.13039/501100011033 ), the European Union (FEDER Funds), and Generalitat Valenciana (grant No. PROMETEO CIPROM/2021/70 ).