Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Multi-functional oxidase-like activity of praseodymia nanorods and nanoparticles

  • Lei, Jiang
  • Han, Yaning
  • Fernández García, Susana
  • Tinoco Rivas, Miguel
  • Li, Zhuang
  • Nan, Pengli
  • Sun, Jingtao
  • Delgado Jaén, Juan José
  • Pan, Huiyan
  • Blanco Montilla, Ginesa
  • Martínez López, Francisco Javier
  • Hungría Hernández, Ana Belén
  • Calvino Gámez, José Juan
  • Chen, Xiaowei
The ability to mimic protein-based oxidase with multi-functional inorganic nanozymes would greatly advance biomedical and clinical practices. Praseodymia (PrOx) nanorods (NRs) and nanoparticles (NPs) have been synthesized using hydrothermal and precipitation methods. Both PrOx catalysts with different morphologies exhibit significantly higher oxidase-like activities (Michaelis-Menten constant Km ≤ 0.026 mM) than commercial PrOx and most so-far-reported artificial enzymes. One of the substrates, dopamine, can be oxidized and further polymerized to generate polydopamine in acidic conditions. Akin to CeO2, which is a well-studied nanozyme, a different mechanism involving holes+, oxygen vacancies and oxygen mobility over PrOx catalysts has been proposed in this work. However, fluoride ions were found to impose opposite effects on the oxidase-mimicking activity of PrOx and CeO2, implying a promising path for the exploration of new nanozymes. In support of this, PrOx was further applied in colorimetric sensing of L-cysteine and fluoride with high sensitivity.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Reduced Tiara-like Palladium Complex for Suzuki Cross-Coupling Reactions

  • Daka, Mario
  • Montini, Tiziano
  • Pengo, Paolo
  • Marussi, Giovanna
  • Crosera, Matteo
  • Adami, Gianpiero
  • Delgado Jaén, Juan José
  • Giambastiani, Giuliano
  • Fertey, Pierre
  • Fonda, Emiliano
  • Pasquato, Lucia
  • Fornasiero, Paolo
The design of highly active and structurally well-defined catalysts has become a crucial issue for heterogeneous catalysed reactions while reducing the amount of catalyst employed. Beside conventional synthetic routes, the employment of polynuclear transition metal complexes as catalysts or catalyst precursors has progressively intercepted a growing interest. These well-defined species promise to deliver catalytic systems where a strict control on the nuclearity allows to improve the catalytic performance while reducing the active phase loading. This study describes the development of a highly active and reusable palladium-based catalyst on alumina (Pd8/Al2O3) for Suzuki cross-coupling reactions. An octanuclear tiara-like palladium complex was selected as active phase precursor to give isolated Pd-clusters of ca. 1 nm in size on Al2O3. The catalyst was thoroughly characterised by several complementary techniques to assess its structural and chemical nature. The high specific activity of the catalyst has allowed to carry out the cross-coupling reaction in 30 min using only 0.12 mol % of Pd loading under very mild and green reaction conditions. Screening of various substrates and selectivity tests, combined with recycling and benchmarking experiments, have been used to highlight the great potentialities of this new Pd8/Al2O3 catalyst. © 2023 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Improved electrocatalytic activity of Pt on carbon nanofibers for glucose oxidation mediated by support oxygen groups in Pt perimeter

  • Van der Ham, M.P.J.M.
  • Hersbach, T.J.P.
  • Delgado Jaén, Juan José
  • Matson, B.D.
  • Lim, J.
  • Führer, M.
  • Van Haasterecht, T.
  • Verhoeven, M.W.G.M.
  • Hensen, E.J.M.
  • Sokaras, D.
  • Koper, M.T.M.
  • Bitter, J.H.
Support effects in supported metal catalysts are well studied for thermocatalytic reactions, but less studied for electrocatalytic reactions. Here, we prepared a series of Pt supported on carbon nanofiber catalysts which vary in their Pt particle size and the content of oxygen groups on the surface of the CNF. We show that the activity of these catalysts for electrocatalytic glucose oxidation relates linearly with the content of support oxygen groups. Since the electronic state of Pt (XAS) and Pt surface structure (CO-stripping) were indistinguishable for all materials, we conclude that sorption effects of glucose play a crucial role in catalytic activity. This was further confirmed by establishing a relation between the annulus of the Pt particles and the activity
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Effect of the TiO2-carbon interface on charge transfer and ethanol photo-reforming

  • Bu, Enqi
  • Chen, Xiaowei
  • López Cartes, Carlos
  • Cazaña, Fernando
  • Monzón, Antonio
  • Martínez López, Francisco Javier
  • Delgado Jaén, Juan José
Carbonaceous materials have been widely used in photocatalysis to solve the drawback of rapid electron-hole recombination rate of semiconductors such as titania. To further understand the charge separation mechanism and its effect on the ethanol photoreforming hydrogen production, two types of carbon-titania hybrid material systems were studied. One of them is multi-walled carbon nanotube-titania nanoparticles (MWCNT-TiO2) prepared by a sol-gel synthesis method, which according to previous studies should facilitate the migration of electrons from TiO2 to MWCNT. The second system is based on a two-dimensional carbon (exfoliated carbon, 2DC) and titania nanosheet (TNS), synthesized through a hydrothermal route that enabled the formation of strong interaction between the carbon and the {001} facets of the TNS. Our results demonstrate that this unique design promotes the migration of the photogenerated holes from the TNS to the expanded carbon. Steady state photoluminescence studies indicate that the recombination rate in both cases decreases benefiting from the spatial separation of photogenerated carriers, resulting in enhanced photocatalytic activity. The present study provides a comprehensive understanding of the charge separation mechanism and its effect on ethanol photoreforming hydrogen production in carbon-titania hybrid material systems and clearly highlights the need for further research to investigate the charge transfer in these kinds of hybrid materials.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

PdCu nanoalloy decorated photocatalysts for efficient and selective oxidative coupling of methane in flow reactors

  • Li, Xiyi
  • Wang, Chao
  • Yang, Jianlong
  • Xu, Youxun
  • Yang, Yi
  • Yu, Jiaguo
  • Delgado Jaén, Juan José
  • Martsinovich, Natalia
  • Sun, Xiao
  • Zheng, Xu-Sheng
  • Huang, Weixin
  • Tang, Junwang
Methane activation by photocatalysis is one of the promising sustainable technologies for chemical synthesis. However, the current efficiency and stability of the process are moderate. Herein, a PdCu nanoalloy (~2.3 nm) was decorated on TiO2, which works for the efficient, stable, and selective photocatalytic oxidative coupling of methane at room temperature. A high methane conversion rate of 2480 μmol g−1 h−1 to C2 with an apparent quantum efficiency of ~8.4% has been achieved. More importantly, the photocatalyst exhibits the turnover frequency and turnover number of 116 h−1 and 12,642 with respect to PdCu, representing a record among all the photocatalytic processes (λ > 300 nm) operated at room temperature, together with a long stability of over 112 hours. The nanoalloy works as a hole acceptor, in which Pd softens and weakens C-H bond in methane and Cu decreases the adsorption energy of C2 products, leading to the high efficiency and long-time stability.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Highly selective oxidation of benzene to phenol with air at room temperature promoted by water

  • Xie, J.
  • Li, X.
  • Guo, J.
  • Luo, L.
  • Delgado Jaén, Juan José
  • Martsinovich, N.
  • Tang, J.
Phenol is one of the most important fine chemical intermediates in the synthesis of plastics and drugs with a market size of ca. $30b1 and the commercial production is via a two-step selective oxidation of benzene, requiring high energy input (high temperature and high pressure) in the presence of a corrosive acidic medium, and causing serious environmental issues2–5 . Here we present a four-phase interface strategy with well-designed Pd@Cu nanoarchitecture decorated TiO2 as a catalyst in a suspension system. The optimised catalyst leads to a turnover number of 16,000–100,000 for phenol generation with respect to the active sites and an excellent selectivity of ca. 93%. Such unprecedented results are attributed to the efficient activation of benzene by the atomically Cu coated Pd nanoarchitecture, enhanced charge separation, and an oxidant-lean environment. The rational design of catalyst and reaction system provides a green pathway for the selective conversion of symmetric organic molecules.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Hydrothermal synthesis and characterization of Cu-MnOx catalysts for CO oxidation: Effect of Cu:Mn molar ratio on their structure and catalytic activity

  • Pan, Huiyan
  • Chen, Xiaowei
  • Martínez López, Francisco Javier
  • Bu, Enqi
  • Delgado Jaén, Juan José
A comprehensive study was conducted on the synthesis of Cu-MnOx catalysts using a one-pot hydrothermal method followed by a calcination step. These catalysts were thoroughly characterized using techniques such as X-ray diffraction (XRD), X-ray fluorescence (XRF), N2 physisorption, X-ray photoelectron spectroscopy (XPS), temperature programmed desorption and reduction (TPD and TPR), and advanced transmission electron microscopy (TEM). The results revealed that the Cu:Mn molar ratio of the precursors, Cu(NO3)2 and KMnO4, had a significant impact on the crystalline structure and morphology of the synthesized samples. A Cu-doped cryptomelane with a nanorod morphology was observed when the Cu:Mn molar ratio was 0.05. Conversely, a mixture of Cu-doped cryptomelane nanorods, Mn2O3, and Cu1.5Mn1.5O4 spinel nanoparticles was formed at molar ratios of 0.1 and 0.25. The catalytic activities of these catalysts for CO oxidation followed the order: 0.25Cu-MnOx ≈ 0.1Cu-MnOx > 0.05Cu-MnOx > cryptomelane. A good correlation was found between the catalytic performance and reducibility of the catalysts under CO atmosphere that can be related to the ability of the samples to activate the CO molecule. The high reducibility of the sample even at room temperature suggest that the CO oxidation over the synthesized Cu-MnOx catalysts may follow a Mars van Krevelen model