Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Probabilistic mapping of earthquake-induced submarine landslide susceptibility in the South-West Iberian margin

  • Collico, Stefano
  • Arroyo, Marcos
  • Urgeles, Roger
  • Gràcia, Eulàlia
  • Devincenzi, Marcelo
  • Pérez, Norma
16 pages, 16 figures, 6 tables, The SW Iberian continental margin is well recognized as a tectonically active area, where major canyons and mass wasting events are both present. Earthquake triggered submarine landslides may cause tsunami and result in catastrophic damage to bordering coastal areas. In this setting, submarine landslide susceptibility mapping represents a major step towards a regional risk mitigation strategy. Landslide susceptibility mapping in large offshore areas presents significant challenges as a result of the limited information on controlling variables, large uncertainties in triggering mechanisms and limited geotechnical data. In this study, a geotechnical model-based approach has been followed that narrows the range of controlling factors and, within a probabilistic framework, allows a systematic treatment of parameter uncertainties. This model-based analysis covers the whole SW Iberian margin increasing by three orders of magnitude the areal extent of precedent offshore slope stability susceptibility studies. This jump in spatial scale is facilitated by application of a systematic Bayesian updating procedure, to combine geotechnical information from global databases and that available from regional sites. Seismic shaking is estimated using an available regional database of seismogenic faults. These tools are implemented within a GIS to generate, via Montecarlo simulations, probabilistic landslide susceptibility maps based on two different analytical seismic infinite slope stability models. These models differ mainly in the form of their final results, either as distributions of slope stability safety factors or as distributions of seismic-triggered slope displacements. Receiving Operator Curves are used to assess the different landslide susceptibility predictions obtained against a comprehensive regional database of submarine landslides. It turns out that the models analyzed correctly predict 92% and 82% of the mapped landslide subset chosen for validation for pseudo-static and displacement-based method respectively. This suggests that, within the limits of the currently available databases, seismic events are the dominant factor at the origin of the submarine landslides mapped in the study area. An advantage of the framework presented is that it can quickly incorporate new regional geotechnical information or better regional landslide databases, as they become available, This research received funding from the European Union's Horizon 2020 research and innovating programme under the Marie Sklodowska-Curie grant agreement No 721403. The Spanish “Ministerio de Ciencia e Innovación” and the European Regional Development Fund through grant CTM2015-70155-R (project INSIGHT) are also acknowledged, With the funding support of the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000928-S), of the Spanish Research Agency (AEI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Seismic Diffraction Imaging to Characterize Mass‐Transport Complexes: Examples From the Gulf of Cadiz, South West Iberian Margin

  • Ford, Jonathan
  • Urgeles, Roger
  • Camerlenghi, Angelo
  • Gràcia, Eulàlia
25 pages, 10 figures, 1 appendix, supporting information, https://doi.org/10.1029/2020JB021474.-- Data Availability Statement: Preprocessed prestack seismic data, processing horizons, migration velocities, and code to reproduce the results using Madagascar (Fomel et al., 2013) are archived in Ford (2020), Mass‐transport complexes (MTCs) are often characterized by small‐scale discontinuous internal structure, such as slide blocks, rough interfaces, faults, and truncated strata. Seismic images may not properly resolve such structure because seismic reflections are fundamentally limited in lateral resolution by the source bandwidth. The relatively weak seismic diffractions, instead, encode information on subwavelength‐scale structure, with superior illumination. In this paper, we compare diffraction imaging to conventional, full‐wavefield seismic imaging to characterize MTCs. We apply a seismic diffraction imaging workflow based on plane‐wave destruction filters to two 2D marine multichannel seismic profiles from the Gulf of Cadiz. We observe that MTCs generate a large amount of diffracted energy relative to the unfailed confining sediments. The diffraction images show that some of this energy is localized along existing discontinuities imaged by the full‐wavefield images. We demonstrate that, in combination with full‐wavefield images, diffraction images can be utilized to better discriminate the lateral extent of MTCs, particularly for thin bodies. We suggest that diffraction images may be a more physically correct alternative to commonly used seismic discontinuity attributes derived from full‐wavefield images. Finally, we outline an approach to utilize the out‐of‐plane diffractions generated by the 3D structure of MTCs, normally considered a nuisance in 2D seismic processing. We use a controlled synthetic test and a real‐data example to show that under certain conditions these out‐of‐plane diffractions might be used to constrain the minimum width of MTCs from single 2D seismic profiles, Data for this study were collected in the framework of the project INSIGHT (CTM2015‐70155‐R) funded by the Spanish “Ministerio de Ciencia e Innovación” and the European Regional Development Fund. J. Ford was supported by a Marie Curie Doctoral Fellowship through the SLATE Innovative Training Network within the European Union Framework Program for Research and Innovation Horizon 2020 under grant agreement no. 721403. With the funding support of the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000928-S), of the Spanish Research Agency (AEI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A mixed turbidite - contourite system related to a major submarine canyon: The Marquês de Pombal Drift (south-west Iberian margin)

  • Mencaroni, Davide
  • Urgeles, Roger
  • Camerlenghi, Angelo
  • Llopart, Jaume
  • Ford, Jonathan
  • Sànchez-Serra, Cristina
  • Meservy, William
  • Gràcia, Eulàlia
  • Rebesco, Michele
  • Zitellini, Nevio
28 pages, 10 figures, 1 table, supporting information https://doi.org/10.1111/sed.12844.-- Data availability The data that support the findings of this study are available from the corresponding author upon reasonable request., Synchronous interaction between bottom currents and turbidity currents has been reported often in channel–levée systems where the thickness of the turbidity currents exceeds that of the levées. Such interplay between along-slope and down-slope sedimentary processes is one of the mechanisms by which ‘mixed turbidite–contourite systems’ can originate. However, bottom currents flow over large areas of the seafloor, including continental slopes characterized by deeply incised submarine canyons rather than channel levées. In these cases, a direct interaction between along-slope and down-slope currents is, theoretically, unlikely to take place. In this study, oceanographic, swath bathymetry, multichannel seismic data and sediment cores are used to investigate a 25 km long, 10 km wide and up to 0.5 km thick deep-sea late Quaternary deposit that sits adjacent to the north-west flank of one of the major canyons in the North Atlantic, the São Vicente Canyon, in the Alentejo Basin (south-west Iberian margin). The area receives the influence of a strong bottom current, the Mediterranean Outflow Water, which has swept the continental slope at different water depth ranges during glacial and interglacial periods. Architectural patterns and sediment characteristics suggest that this sedimentary body, named Marquês de Pombal Drift, is the result of the interaction between the Mediterranean Outflow Water (particularly during cold periods) and turbidity currents flowing along the São Vicente Canyon. Because the canyon is incised significantly deeper (ca 1.5 km) than the thickness of turbidity currents, an additional process, in comparison to earlier models, is needed to allow the interaction with the Mediterranean Outflow Water and transport sediment out of the canyon. In the São Vicente Canyon, and likely in other canyons worldwide, interaction of turbidity currents with contour currents requires intermediate nepheloid layers that export the finer-grained fraction of turbidity currents out of the canyon at the boundary between major water masses, This research received funding by the European Union’s Horizon 2020 research and innovating programme under the Marie Sklodowska-Curie grant via project ITN-SLATE (grant agreement No 721403). The Spanish “Ministerio de Ciencia e Innovación” and the European Regional Development Fund are also acknowledged for funding through grant CTM2015-70155-R (project INSIGHT), With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000928-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On the Inference of Tsunami Uncertainties From Landslide Run-Out Observations

  • Zengaffinen, Thomas
  • Urgeles, Roger
  • Løvholt, Finn
30 pages, 19 figures, 1 table.-- Data Availability Statement: The following key data set are used and made available in this paper: The new landslide database covering the Gulf of Cadiz is available through the following repository (Urgeles et al., 2021). The main outputs from the simulation, that is, those displayed in in Figures 9-12 and 14-19 are available through (Zengaffinen-Morris, 2022). The landslide model BingClaw has been published previously in the AGU journal Geophysical Research Letters, with the availability statement given in (Løvholt et al., 2017). Please note that the entire data set resulting from the model simulations, exceed 1 TB and is hence too large to place in a public repository. Hence, only the main outputs from the simulations are made available here, Probabilistic tsunami hazard analysis (PTHA) due to submarine landslides is much less developed than PTHA for earthquake sources. This is partly because of less constrained data available for quantifying source probability, and partly because of the lack of knowledge related to the tsunami generation process due to landslide dynamics. This study provides a basis for estimating the uncertainty related to landslide dynamics for PTHA from submarine landslides based on a new landslide database in the Gulf of Cadiz. The establishment of this new database is described herein. We use submarine landslide run-out statistics from this database to calibrate landslide parameters and related uncertainties employing the cohesive landslide model BingClaw. In turn, coupling the landslide motion to tsunami genesis is performed in order to characterize the inferred tsunami uncertainties. Important parameters that can explain the large tsunami uncertainties are the initial water depth of the landslide, the slope, the landslide volume, and the initial yield strength of the landslide material. Kinematic properties such as the initial landslide acceleration or the Froude number are found to strongly correlate with the tsunami-genesis. In this study, we show how matching numerical landslide models with observed run-out from past events in the field can give information about the uncertainty in their tsunami-genic strength. This can in turn be applied in future PTHA for spanning uncertainty ranges due to the landslide dynamics on tsunami-genesis, constrained by landslide run-out data, This project has received funding from the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 721403. The Spanish “Ministerio de Ciencia e Innovación” and the European Regional Development Fund through grant CTM2015-70155-R (project INSIGHT) and Expert Analytics AS in Oslo are also acknowledged, Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Probabilistic mapping of earthquake-induced submarine landslide susceptibility in the South-West Iberian margin

  • Collico, Stefano
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
  • Urgelés Esclasans, Roger
  • Gràcia Mont, Eulàlia
  • Devincenzi, M.J.
  • Pérez García, Norma
The SW Iberian continental margin is well recognized as a tectonically active area, where major canyons and mass wasting events are both present. Earthquake triggered submarine landslides may cause tsunami and result in catastrophic damage to bordering coastal areas. In this setting, submarine landslide susceptibility mapping represents a major step towards a regional risk mitigation strategy. Landslide susceptibility mapping in large offshore areas presents significant challenges as a result of the limited information on controlling variables, large uncertainties in triggering mechanisms and limited geotechnical data. In this study, a geotechnical model-based approach has been followed that narrows the range of controlling factors and, within a probabilistic framework, allows a systematic treatment of parameter uncertainties. This model-based analysis covers the whole SW Iberian margin increasing by three orders of magnitude the areal extent of precedent offshore slope stability susceptibility studies. This jump in spatial scale is facilitated by application of a systematic Bayesian updating procedure, to combine geotechnical information from global databases and that available from regional sites. Seismic shaking is estimated using an available regional database of seismogenic faults. These tools are implemented within a GIS to generate, via Montecarlo simulations, probabilistic landslide susceptibility maps based on two different analytical seismic infinite slope stability models. These models differ mainly in the form of their final results, either as distributions of slope stability safety factors or as distributions of seismic-triggered slope displacements. Receiving Operator Curves are used to assess the different landslide susceptibility predictions obtained against a comprehensive regional database of submarine landslides. It turns out that the models analyzed correctly predict 92% and 82% of the mapped landslide subset chosen for validation for pseudo-static and displacement-based method respectively. This suggests that, within the limits of the currently available databases, seismic events are the dominant factor at the origin of the submarine landslides mapped in the study area. An advantage of the framework presented is that it can quickly incorporate new regional geotechnical information or better regional landslide databases, as they become available., This research received funding from the European Union's Horizon 2020 research and innovating programme under the Marie Sklodowska-Curie grant agreement No 721403. The Spanish “Ministerio de Ciencia e Innovación” and the European Regional Development Fund through grant CTM2015-70155-R (project INSIGHT) are also acknowledged., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Bayesian mixture analysis of a global database to improve unit weight prediction from CPTu

  • Collico, Stefano
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
Empirical correlations between different geotechnical parameters are frequently sought after by exploiting multivariate databases. An example are estimations of total unit weight from cone penetration tests (CPTu), which are very useful in earlier design stages. If the underlying soil database includes data from many different soils a single correlation may lack precision. Precision is gained when the underlying database is narrowed down to some specific soil type, but the applicability of a soil-specific correlation is also limited. A way out of this dilemma is to apply clustering techniques to a general database before developing separate correlations for different clusters. Projecting the clustered data back to a convenient classification space (e.g., one spanned by normalized CPTu metrics) new data can be easily assigned to different clusters and the appropriate correlation used. This idea is illustrated here using Bayesian Mixture Analysis (BMA) to identify hidden soil classes within a general geotechnical database that supports correlations between soil total unit weight and CPTu readings. It is shown that BMA supported clustering improves the accuracy of previous regressions, and, more importantly, facilitates the formulation of novel and more accurate regressions. A simple discriminant criterion is developed to facilitate application of cluster-based regressions to new sites. The good performance of the method is illustrated with application to a deltaic site., This research received funding from the European Union's Horizon 2020 research and innovating programme under the Marie Sklodowska-Curie grant agreement No 721403. Financial support of Ministerio de Ciencia e Innovación of Spain through research project PID2020-119598RB-I00 is gratefully appreciated, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

A simple approach to probabilistic CPTu-based geotechnical stratigraphic profiling

  • Collico, Stefano
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
  • Devincenzi, Marcelo
Geotechnical profile delineation is an important aspect of the geotechnical engineering design process. The Cone Penetration Test (CPTu) is widely used for this purpose, as it is simple to classify soils based on their different responses to the cone. However, CPTu-based delineations typically involve engineering interpretation, as they are affected by the classification scheme applied, by inherent soil variability and by measurements error. A semi-automated CPTu data treatment tool is here presented aiming to simplify the soil delineation task, adding consistency and transparency to the involved engineering interpretation process and facilitating the transference of information between the different parties involved in design. The tool fits bivariate normal distributions to interpreted CPTu data according to some user specified criteria that quantify estimated classification and measurement uncertainties. Classification makes use of conventional class boundaries –here taken from Robertson, 1990 chart-, which are applied with user-specified refinement. Thin layers are consolidated into adjacent ones to further simplify the resulting profile. The operation of the proposed algorithm is illustrated by interpreting CPTu records from a deltaic sedimentary environment. The outputs of this simple method may be used as input for more advanced probabilistic methodologies, helping thus to bridge the gap between qualitative practice and quantitative research methods., This research received funding from the European Union’s Horizon 2020 research and innovating programme under the Marie Sklodowska-Curie grant agreement No 721403. Financial support of Ministerio de Ciencia e Innovación of Spain through research project PID2020-119598RB-I00 is gratefully appreciated., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Probabilistic mapping of earthquake-induced submarine landslide susceptibility in the South-West Iberian margin

  • Collico, Stefano
  • Arroyo Álvarez de Toledo, Marcos
  • Urgelés Esclasans, Roger
  • Gràcia Mont, Eulàlia
  • Devincenzi, M.J.
  • Pérez García, Norma
The SW Iberian continental margin is well recognized as a tectonically active area, where major canyons and mass wasting events are both present. Earthquake triggered submarine landslides may cause tsunami and result in catastrophic damage to bordering coastal areas. In this setting, submarine landslide susceptibility mapping represents a major step towards a regional risk mitigation strategy. Landslide susceptibility mapping in large offshore areas presents significant challenges as a result of the limited information on controlling variables, large uncertainties in triggering mechanisms and limited geotechnical data. In this study, a geotechnical model-based approach has been followed that narrows the range of controlling factors and, within a probabilistic framework, allows a systematic treatment of parameter uncertainties. This model-based analysis covers the whole SW Iberian margin increasing by three orders of magnitude the areal extent of precedent offshore slope stability susceptibility studies. This jump in spatial scale is facilitated by application of a systematic Bayesian updating procedure, to combine geotechnical information from global databases and that available from regional sites. Seismic shaking is estimated using an available regional database of seismogenic faults. These tools are implemented within a GIS to generate, via Montecarlo simulations, probabilistic landslide susceptibility maps based on two different analytical seismic infinite slope stability models. These models differ mainly in the form of their final results, either as distributions of slope stability safety factors or as distributions of seismic-triggered slope displacements. Receiving Operator Curves are used to assess the different landslide susceptibility predictions obtained against a comprehensive regional database of submarine landslides. It turns out that the models analyzed correctly predict 92% and 82% of the mapped landslide subset chosen for validation for pseudo-static and displacement-based method respectively. This suggests that, within the limits of the currently available databases, seismic events are the dominant factor at the origin of the submarine landslides mapped in the study area. An advantage of the framework presented is that it can quickly incorporate new regional geotechnical information or better regional landslide databases, as they become available., This research received funding from the European Union's Horizon 2020 research and innovating programme under the Marie Sklodowska-Curie grant agreement No 721403. The Spanish “Ministerio de Ciencia e Innovación” and the European Regional Development Fund through grant CTM2015-70155-R (project INSIGHT) are also acknowledged., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Bayesian mixture analysis of a global database to improve unit weight prediction from CPTu

  • Collico, Stefano
  • Arroyo Álvarez de Toledo, Marcos
Empirical correlations between different geotechnical parameters are frequently sought after by exploiting multivariate databases. An example are estimations of total unit weight from cone penetration tests (CPTu), which are very useful in earlier design stages. If the underlying soil database includes data from many different soils a single correlation may lack precision. Precision is gained when the underlying database is narrowed down to some specific soil type, but the applicability of a soil-specific correlation is also limited. A way out of this dilemma is to apply clustering techniques to a general database before developing separate correlations for different clusters. Projecting the clustered data back to a convenient classification space (e.g., one spanned by normalized CPTu metrics) new data can be easily assigned to different clusters and the appropriate correlation used. This idea is illustrated here using Bayesian Mixture Analysis (BMA) to identify hidden soil classes within a general geotechnical database that supports correlations between soil total unit weight and CPTu readings. It is shown that BMA supported clustering improves the accuracy of previous regressions, and, more importantly, facilitates the formulation of novel and more accurate regressions. A simple discriminant criterion is developed to facilitate application of cluster-based regressions to new sites. The good performance of the method is illustrated with application to a deltaic site., This research received funding from the European Union's Horizon 2020 research and innovating programme under the Marie Sklodowska-Curie grant agreement No 721403. Financial support of Ministerio de Ciencia e Innovación of Spain through research project PID2020-119598RB-I00 is gratefully appreciated, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A simple approach to probabilistic CPTu-based geotechnical stratigraphic profiling

  • Collico, Stefano
  • Arroyo Álvarez de Toledo, Marcos
  • Devincenzi, Marcelo
Geotechnical profile delineation is an important aspect of the geotechnical engineering design process. The Cone Penetration Test (CPTu) is widely used for this purpose, as it is simple to classify soils based on their different responses to the cone. However, CPTu-based delineations typically involve engineering interpretation, as they are affected by the classification scheme applied, by inherent soil variability and by measurements error. A semi-automated CPTu data treatment tool is here presented aiming to simplify the soil delineation task, adding consistency and transparency to the involved engineering interpretation process and facilitating the transference of information between the different parties involved in design. The tool fits bivariate normal distributions to interpreted CPTu data according to some user specified criteria that quantify estimated classification and measurement uncertainties. Classification makes use of conventional class boundaries –here taken from Robertson, 1990 chart-, which are applied with user-specified refinement. Thin layers are consolidated into adjacent ones to further simplify the resulting profile. The operation of the proposed algorithm is illustrated by interpreting CPTu records from a deltaic sedimentary environment. The outputs of this simple method may be used as input for more advanced probabilistic methodologies, helping thus to bridge the gap between qualitative practice and quantitative research methods., This research received funding from the European Union’s Horizon 2020 research and innovating programme under the Marie Sklodowska-Curie grant agreement No 721403. Financial support of Ministerio de Ciencia e Innovación of Spain through research project PID2020-119598RB-I00 is gratefully appreciated., Peer Reviewed, Postprint (author's final draft)