Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 21
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Pre-failure stress-state of an earthquake triggered submarine landslide: The Marques de Pombal landslide, offshore Portugal

  • Mencaroni, Davide
  • Urgeles, Roger
  • Gràcia, Eulàlia
  • Bartolomé, Rafael
20th International Sedimentological Congress (ISC), 13-17 August 2018, Quebec City, Canada.-- 1 page, The Marques de Pombal landslide deposit, with its estimated volume of 1.3 km2, is located in the Alentejo Basin, the Northern section of the Gulf of Cadiz (SW Iberian Margin). Gravity core analyses sampled in the Marques de Pombal depositional area reveal that multiple landslide and turbidity events contributed to the deposit formation1,2. Considering the moderate-to-large-magnitude seismic activity of the area, earthquakes are the main triggering candidate for the mass wasting events. The Great Lisbon catastrophic earthquake of 1755 may also have contributed to the landslide’s deposit. This work reconstructs the sedimentary, stratigraphic and geotechnical conditions of the area of interest before the 1755 earthquake and aims to evaluate the development of excess pore pressure in order to balance pre-conditioning factors vs triggering mechanisms in onset of slope failure. Seismic profiles, swath bathymetry deep-towed side-scan sonar mosaics and well and log data from the IODP 339 expedition have been used to construct a stratigraphic model of the slope failure area. Gravity core samples are used to understand development of permeability, compressibility and strength with burial depth. These data are used to build a numerical finite elements model, which aims to determine the relationship between continental margin development and its hydrogeological evolution, This work was supported and financed by the SLATE (H2020-MSCA-ITN-2016-721403)–“Submarine landslides and their impact on continental margins ”European Training Network and the Spanish project “ImagiNg large SeismogenuIc and tsunamiGenic structures of the Gulf of Cadiz with ultra-High resolution Technologies” (INSIGHT(CTM2015-70155-R), Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Submarine Landslides of the Mediterranean Sea: How large, how often

  • Urgeles, Roger
  • Meservy, William
  • Gràcia, Eulàlia
  • Lo Iacono, Claudio
  • Sànchez-Serra, Cristina
  • Zengaffinen, Thomas
  • Løvholt, Finn
20th International Sedimentological Congress (ISC), 13-17 August 2018, Quebec City, Canada.-- 1 page, An updated version of the submarine landslide database of the Mediterranean Sea1 contains 955 MTDs and 2608 failure scars showing that submarine landslides are ubiquitous features along Mediterranean continental margins. Their distribution reveals that major deltaic wedges display the larger submarine landslides, while tectonically active margins are characterized by relatively small failures. In all regions, landslide size distributions display power law scaling for landslides > 1 km3. We find consistent differences on the exponent of the power law depending on the tectonic setting. Active margins present steep slopes of the frequency-magnitude relationship whereas passive margins tend to display gentler slopes. This pattern likely responds to the common view that tectonically active margins have numerous but small failures, while passive margins have larger but fewer failures. Available age information suggests that failures exceeding 1000 km3are infrequent and may recur every ~40 kyr. Smaller failures that can still cause significant damage might be relatively frequent, with failures> 1 km3likely recurring every 40 years. This comprehensive database highlights that our knowledge of submarine landslide dynamics within time is limited to a few tens of thousands of years. Available data suggest that submarine landslides may preferentially occur during lowstand periods, but no firm conclusion can be made on this respect, as only 149 landslides (out of 955 included in the database) have relatively accurate age determinations. The temporal pattern and changes in frequency-magnitude distribution suggest that sedimentation patterns and pore pressure development have had a major role in triggering slope failures and control the mass wasting sediment flux to the deep basin, This work was supported and financed by the SLATE (H2020-MSCA-ITN-2016-721403) “Submarine landslides and their impact on continental margins” European Training Network and the Spanish project “ImagiNg large SeismogenIc and tsunamiGenic structures of the Gulf of Cadiz with ultra-High resolution Technologies” (INSIGHT (CTM2015- 70155-R), Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Submarine slope failures associated to the Marquês de Pombal active fault reveal past earthquake events (SW Iberian Margin)

  • Gràcia, Eulàlia
  • Lo Iacono, Claudio
  • Urgeles, Roger
  • Bartolomé, Rafael
  • Martínez-Loriente, S.
  • Perea, Héctor
  • Sànchez-Serra, Cristina
  • Mencaroni, Davide
  • Meservy, William
  • Vizcaino, Alexis
  • Terrinha, Pedro
  • Zitellini, Nevio
20th International Sedimentological Congress (ISC), 13-17 August 2018, Quebec City, Canada.-- 1 page, The relationship between submarine active seismogenic faults and associated slope failures, especially in low-convergence areas, is still poorly known. Here we present a case study from the SW Iberian Margin, at the boundary between the African and Eurasian plates. Despite low plate convergence (4-5 mm/yr), this area has been the source of the largest earthquakes and tsunamis in western Europe1, such as the 1969 Earthquake (Mw8) and the 1 November 1755 Lisbon Earthquake (estimated Mw8.5). Here we present AUV-and shipboard-bathymetry maps, high-resolution sidescan sonar data, multichannel seismic profiles and sediment cores that allow us to characterize, with unprecedented resolution, the relationship between the fault system and related slope failures. The Marques de Pombal Fault is an active 50-km-long west-verging monocline thrust cutting through the Plio-Quaternary units2. Deformation is accommodated by thrusting and folding. Sidescan sonar maps across the MPF reveal a large (260 km2) translational landslide and debris flow. Successive slope failures located at the base of the fault scarp provide evidence of cyclic fault activity. The most recent slide (230 yr BP), may have been triggered by the 1755 Lisbon earthquake. By dating previous slide deposits, we obtained a recurrence period of 2000 yr3, suggesting cyclic activity of the Marques de Pombal Fault, We thank funding by ETNSLATE (H2020-MSCA-ITN-2016-721403) & INSIGHT (CTM2015-70155-R) projects, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

From gravity cores to overpressure history: the importance of measured sediment physical properties in hydrogeological models

  • Mencaroni, Davide
  • Llopart, Jaume
  • Urgeles, Roger
  • Lafuerza, Sara
  • Gràcia, Eulàlia
  • Le Friant, Anne
  • Urlaub, M.
12 pages, 8 figures, 2 tables, The development of overpressure in continental margins is typically evaluated with hydrogeological models. Such approaches are used to both identify fluid flow patterns and to evaluate the development of high pore pressures within layers with particular physical properties that may promote slope instability. In some instances, these models are defined with sediment properties based on facies characterization and proxy values of porosity; permeability or compressibility are derived from the existing literature as direct measurements are rarely available. This study uses finite-element models to quantify the differences in computed overpressure generated by fine-grained hemipelagic sediments from the Gulf of Cadiz, offshore Martinique and the Gulf of Mexico, and their consequences in terms of submarine slope stability. By comparing our simulation results with in situ pore pressure data measured in the Gulf of Mexico, we demonstrate that physical properties measured on volcanic-influenced hemipelagic sediments underestimate the computed stability of a submarine slope. Physical properties measured on sediments from the study area are key to improving the reliability and accuracy of overpressure models, and when that information is unavailable, literature data from samples with similar lithologies, composition and depositional settings enable better assessment of the overpressure role as a pre-conditioning factor in submarine landslide initiation, Davide Mencaroni was supported by a Marie Skłodowska-Curie Doctoral Fellowship through the SLATE Innovative Training Network within the European Union Framework Programme for Research and Innovation Horizon 2020 under Grant Agreement No. 721403. The Spanish ‘Ministerio de Economia y Competitividad’ and the European Regional Development Fund through grant CTM2015-70155-R (project INSIGHT) are also acknowledged, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Integrated geophysical, sedimentological and geotechnical investigation of submarine landslides in the Gulf of Lions (Western Mediterranean)

  • Badhani, Shray
  • Cattaneo, Antonio
  • Collico, Stefano
  • Urgeles, Roger
  • Dennielou, Bernard
  • Leroux, Estelle
  • Colin, Florent
  • Garziglia, Sébastien
  • Rabineau, Marina
  • Droz, Laurence
18 pages, 9 figures, 1 table, The Gulf of Lions presents recurring mass-transport deposits (MTDs) within the Plio-Quaternary sediments, suggesting a long history of mass movements. The two large, surficial MTDs are located on the eastern and western levee of the Rhone canyon over an area exceeding 6000 km2 and volumes exceeding 100 km3. Both MTDs were emplaced 21 ka ago (peak of the Last Glacial Maximum), suggesting a common trigger. Here, we present a multidisciplinary high-resolution geophysical, sedimentological and in-situ geotechnical study of the source and deposit areas of both MTDs to characterize distinct expressions of sediment deformation as well as their spatial and chronological distributions. We show the internal structure of mass movements and resulting MTDs with unprecedented details that were previously represented in the conventional seismic data as transparent and chaotic facies. The combination of multidisciplinary approaches shows new insights into the nature of basal surfaces of the slope failures. In particular, we show that the basal surfaces of the failures consist of clay-rich material contrasting with the overlying turbiditic deposits, suggesting that a strong lithological heterogeneity exists within the strata. We suggest that this change in lithology between clay-rich sediments and turbiditic sequences most likely controls the localization of weak layers and landslide basal surfaces, This work and the PhD of Shray Badhani are funded by the European Union's Horizon 2020 research and innovation programme under the Marie-Skłodowska-Curie grant via project ITN SLATE (grant agreement no. 721403), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Probabilistic mapping of earthquake-induced submarine landslide susceptibility in the South-West Iberian margin

  • Collico, Stefano
  • Arroyo, Marcos
  • Urgeles, Roger
  • Gràcia, Eulàlia
  • Devincenzi, Marcelo
  • Pérez, Norma
16 pages, 16 figures, 6 tables, The SW Iberian continental margin is well recognized as a tectonically active area, where major canyons and mass wasting events are both present. Earthquake triggered submarine landslides may cause tsunami and result in catastrophic damage to bordering coastal areas. In this setting, submarine landslide susceptibility mapping represents a major step towards a regional risk mitigation strategy. Landslide susceptibility mapping in large offshore areas presents significant challenges as a result of the limited information on controlling variables, large uncertainties in triggering mechanisms and limited geotechnical data. In this study, a geotechnical model-based approach has been followed that narrows the range of controlling factors and, within a probabilistic framework, allows a systematic treatment of parameter uncertainties. This model-based analysis covers the whole SW Iberian margin increasing by three orders of magnitude the areal extent of precedent offshore slope stability susceptibility studies. This jump in spatial scale is facilitated by application of a systematic Bayesian updating procedure, to combine geotechnical information from global databases and that available from regional sites. Seismic shaking is estimated using an available regional database of seismogenic faults. These tools are implemented within a GIS to generate, via Montecarlo simulations, probabilistic landslide susceptibility maps based on two different analytical seismic infinite slope stability models. These models differ mainly in the form of their final results, either as distributions of slope stability safety factors or as distributions of seismic-triggered slope displacements. Receiving Operator Curves are used to assess the different landslide susceptibility predictions obtained against a comprehensive regional database of submarine landslides. It turns out that the models analyzed correctly predict 92% and 82% of the mapped landslide subset chosen for validation for pseudo-static and displacement-based method respectively. This suggests that, within the limits of the currently available databases, seismic events are the dominant factor at the origin of the submarine landslides mapped in the study area. An advantage of the framework presented is that it can quickly incorporate new regional geotechnical information or better regional landslide databases, as they become available, This research received funding from the European Union's Horizon 2020 research and innovating programme under the Marie Sklodowska-Curie grant agreement No 721403. The Spanish “Ministerio de Ciencia e Innovación” and the European Regional Development Fund through grant CTM2015-70155-R (project INSIGHT) are also acknowledged, With the funding support of the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000928-S), of the Spanish Research Agency (AEI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

How deep does sand deposits in the Alentejo basin (Gulf of Cadiz) reach? Evaluating slope stability from bottom-current activities through time

  • Mencaroni, Davide
  • Urgeles, Roger
  • Ford, Jonathan
  • Llopart, Jaume
  • Sànchez-Serra, Cristina
  • Calahorrano, Alcinoe
  • Brito, Pedro
  • Lo Iacono, Claudio
  • Bartolomé, Rafael
  • Gràcia, Eulàlia
  • Rebesco, Michele
  • Camerlenghi, Angelo
  • Bellwald, Benjamin
European Geosciences Union (EGU) General Assembly 2020, 4-8 May 2020, Contourite deposits are generated by the interplay between deepwater bottom-currents, sediment supply and seafloor topography. The Gulf of Cadiz, in the Southwest Iberian margin, is a famous example of extensive contourite deposition driven by the Mediterranean Outflow Water (MOW), which exits the Strait of Gibraltar, flows northward following the coastline and distributes the sediments coming from the Guadalquivir and Guadiana rivers. The MOW and related contourite deposits affect the stability of the SW Iberian margin in several ways: on one hand it increases the sedimentation rate, favoring the development of excess pore pressure, while on the other hand, by depositing sand it allows pore water pressure to dissipate, potentially increasing the stability of the slope. In the Gulf of Cadiz, grain size distribution of contourite deposits is influenced by the seafloor morphology, which splits the MOW in different branches, and by the alternation of glacial and interglacial periods that affected the MOW hydrodynamic regimes. Fine clay packages alternates with clean sand formations according to the capacity of transport of the bottom-current in a specific area. Generally speaking, coarser deposits are found in the areas of higher MOW flow energy, such as in the shallower part of the slope or in the area closer to the Strait of Gibraltar, while at higher water depths the sedimentation shifts to progressively finer grain sizes as the MOW gets weaker. Previous works show that at present-day the MOW flows at a maximum depth of 1400 m, while during glacial periods the bottom-current could have reached higher depths. In this study we derived the different maximum depths at which the MOW flowed by analyzing the distribution of sands at different depths along the Alentejo basin slope, in the Northern sector of the Gulf of Cadiz. Here we show how changes in sand distribution along slope, within the stratigraphic units deposited between the Neogene and the present day, are driven by glacial – interglacial period alternation that influenced the hydrodynamic regime of the MOW. By deriving the depositional history of sand in the Alentejo basin, we are able to correlate directly the influence that climatic cycles had on the MOW activity. Furthermore, by interpreting new multi-channel seismic profiles we have been able to derive a detailed facies characterization of the uppermost part of the Gulf of Cadiz. An accurate definition of sand distribution along slope plays an important role in evaluating the stability of the slope itself, e.g. to understand if the sediments may be subjected to excess pore pressure generation. As sand distribution is a direct function of the bottom-current transport capacity, the ultimate goal of this study is to understand how climate variations can affect the stability of submarine slope by depositing contourite-related sand, This project has received funding from the European Union’sHorizon 2020 research and innovation programme under grantagreement No 721403, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

A mixed contour current - turbidity system from the São Vicente Canyon, Gulf of Cadiz: depositional features and significance for submarine slope stability

  • Mencaroni, Davide
  • Urgeles, Roger
  • Camerlenghi, Angelo
  • Ford, Jonathan
  • Llopart, Jaume
  • Sànchez-Serra, Cristina
  • Meservy, William
  • Gràcia, Eulàlia
  • Rebesco, Michele
  • Bellwald, Benjamin
17 pages, This project has received funding from the European Union’sHorizon 2020 research and innovation programme under grantagreement No 721403, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Diffraction imaging to understand the internal fabric of mass-transport complexes from Gulf of Cadiz, south west Iberian Margin

  • Ford, Jonathan
  • Urgeles, Roger
  • Gràcia, Eulàlia
  • Camerlenghi, Angelo
European Geosciences Union (EGU) General Assembly 2020, 4-8 May 2020, Outcrop examples of mass-transport complexes (MTCs) often show a complex internal fabric which reflects disaggregation, deformation and entrainment that occurred during transport and emplacement. This can include intense folding, included blocks of substratum and internal shear zones. Seismic reflection images often cannot properly image this internal fabric as the scale of such structure is usually below the effective resolution. This can limit seismic interpretation to characterising only the overall morphology of the deposits (the top and basal reflectors). Seismic reflections are primarily generated by smooth, laterally continuous interfaces. Discontinuities at or below the scale of the seismic wavelength instead generate seismic diffractions (“diffraction hyperbolae” in unmigrated images). Diffractions are often ignored during seismic processing as they are generally lower in amplitude than reflections, though they do not suffer from the same lateral resolution limit as reflections so are potentially sensitive to smaller scale structure. We suggest that the discontinuous internal fabric of MTCs will generate a significant amount of diffraction energy relative to unfailed sediments. The main goal of this study is to use diffraction imaging to image the small-scale, heterogeneous internal fabric of MTCs. We demonstrate this using two high-resolution, multi-channel 2-D marine seismic profiles (3.125 m CMP spacing, 500 m maximum offset) acquired in 2018 and 2019 as part of the INSIGHT project to investigate submarine geohazards in the Gulf of Cadiz. Profile 1 intersects the Marques de Pombal reverse fault and shows a series of stacked MTCs (~1 s TWTT from top to bottom) in the footwall, thought to be related to episodic fault activity. Profile 2 is located in the Portimão Bank area and contains two large MTCs thought to be related to the mobilisation of a salt diapir. The diffraction imaging method proceeds as i) dip-guided plane-wave destruction to separate reflected and diffracted wavefields; ii) velocity analysis by cascaded constant velocity migrations of the diffraction wavefield; iii) post-stack Kirchhoff time migration of the diffraction wavefield. The unmigrated profiles show that the MTC bodies do generate more internal diffractions than the surrounding unfailed sediments. We also observe large contributions of diffraction energy from the rugose top and base of the MTCs, the rugose top salt interface and from faults within the unfailed sediments. The migrated diffraction images reveal distinct internal structure, thought to represent rafted blocks, ramps and both extensional and compressional faulting. The envelope of the diffraction image is used as an overlay on the conventional reflection image to guide interpretation and highlight potential diffractors. This allows interpretation of thin MTCs and improved delineation of their lateral extent (runout) above conventional reflection images. Diffraction imaging has previously been used to image heterogeneous geology such as fracture networks, channel systems and karst topography. Here we apply the technique to study the internal fabric of MTCs. The resulting images resolve small-scale internal structure that is not well resolved by conventional reflection images. Such structures can be used as kinematic indicators to constrain flow direction and emplacement dynamics, which inform the geohazard potential of future subaqueous mass-movements, This project has received funding from the European Union’sHorizon 2020 research and innovation programme under grantagreement No 721403, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Seismic Diffraction Imaging to Characterize Mass‐Transport Complexes: Examples From the Gulf of Cadiz, South West Iberian Margin

  • Ford, Jonathan
  • Urgeles, Roger
  • Camerlenghi, Angelo
  • Gràcia, Eulàlia
25 pages, 10 figures, 1 appendix, supporting information, https://doi.org/10.1029/2020JB021474.-- Data Availability Statement: Preprocessed prestack seismic data, processing horizons, migration velocities, and code to reproduce the results using Madagascar (Fomel et al., 2013) are archived in Ford (2020), Mass‐transport complexes (MTCs) are often characterized by small‐scale discontinuous internal structure, such as slide blocks, rough interfaces, faults, and truncated strata. Seismic images may not properly resolve such structure because seismic reflections are fundamentally limited in lateral resolution by the source bandwidth. The relatively weak seismic diffractions, instead, encode information on subwavelength‐scale structure, with superior illumination. In this paper, we compare diffraction imaging to conventional, full‐wavefield seismic imaging to characterize MTCs. We apply a seismic diffraction imaging workflow based on plane‐wave destruction filters to two 2D marine multichannel seismic profiles from the Gulf of Cadiz. We observe that MTCs generate a large amount of diffracted energy relative to the unfailed confining sediments. The diffraction images show that some of this energy is localized along existing discontinuities imaged by the full‐wavefield images. We demonstrate that, in combination with full‐wavefield images, diffraction images can be utilized to better discriminate the lateral extent of MTCs, particularly for thin bodies. We suggest that diffraction images may be a more physically correct alternative to commonly used seismic discontinuity attributes derived from full‐wavefield images. Finally, we outline an approach to utilize the out‐of‐plane diffractions generated by the 3D structure of MTCs, normally considered a nuisance in 2D seismic processing. We use a controlled synthetic test and a real‐data example to show that under certain conditions these out‐of‐plane diffractions might be used to constrain the minimum width of MTCs from single 2D seismic profiles, Data for this study were collected in the framework of the project INSIGHT (CTM2015‐70155‐R) funded by the Spanish “Ministerio de Ciencia e Innovación” and the European Regional Development Fund. J. Ford was supported by a Marie Curie Doctoral Fellowship through the SLATE Innovative Training Network within the European Union Framework Program for Research and Innovation Horizon 2020 under grant agreement no. 721403. With the funding support of the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000928-S), of the Spanish Research Agency (AEI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

The Euro-Mediterranean Submarine landSlide database (EMSS21), Euro-Mediterranean submarine landslide database (EMSS21): online data

  • Urgeles, Roger
  • Camerlenghi, Angelo
  • Rüther, Denise C.
  • Fantoni, L.
  • Brückner, Nils W.
  • de Pro Díaz, Yolanda
The Euro-Mediterranean Submarine landSlide database (EMSS21) displays information collected from both the literature and geophysical records. Data from the literature is collected from georeferenced map figures, from which the outline of the landslide deposit and the landslide scar have been digitized. Most information such as age, volume, typology, inferred trigger mechanism and relationship to fluid flow features and metadata is extracted from the relevant article. Area of the deposit and landslide runout is determined from the digitized polygons and polylines, volume (if not available) is determined from area and mean thickness. If the latter is not available, the volume is determined from the Area-Volume relationship for landslides where volume has already been determined. When the data originates directly from geophysical records the outline and scars have been determined from geomorphological interpretation of swath bathymetric maps and interpretation of submarine landslides on a variety of seismic records. In such instances, age information originates from a variety of methods presenting a wide range of accuracies, from radiometric dating to well-seismic correlation as well as ages inferred from mean sedimentation rates. In many instances, landslides identified in the literature are dated with an age epoch only., Disclaimer: The EMSS21 is open to later additions and improvements. For these reasons and due to its intrinsic nature, the EMSS21 cannot be guaranteed to be complete, accurate and updated in any part, and will be subjected to successive revisions. Although the Institut de Ciències del Mar of CSIC makes every effort to supply the best available information, no warranty, expressed or implied, is provided as to the accuracy and reliability of all the data supplied in the EMSS21. Users are cautioned to consider carefully the nature of the data and information before using it for decisions that concern personal or public safety. Conclusions drawn from the EMSS21, or actions undertaken on the basis of its contents, are the sole responsibility of the user., The Euro-Mediterranean Submarine landSlide database (EMSS21) is a catalogue of submarine landslides of the Mediterranean Sea and the European continental margins of the Atlantic and Arctic Oceans. The catalogue is compiled from data available in the literature as well as information collected from geophysical data and not published in the scientific literature. The data set includes polygons and polylines for the landslide deposits and landslide scars as well as information relative to age, volume, area, runout, thickness, typology, scar elevation, geological setting, depth, slope, inferred trigger mechanism, relationship to fluid flow features as well as the relevant metadata. The catalogue includes submarine landslides that span the Miocene to Present day. Nevertheless a clear bias exist towards submarine landslides of younger age, particularly for the smaller events, as these events are difficult to map/identify on lower resolution geophysical data sets typically collected in deep-water and large sub-surface depths. The catalogue aims to offer improved understanding of mass-wasting processes, the potentially resulting tsunamis and derived geohazard. The EMSS21 displays information collected from both the literature and geophysical records. Data from the literature is collected from georeferenced map figures, from which the outline of the landslide deposit and the landslide scar have been digitized. Most information such as age, volume, typology, inferred trigger mechanism and relationship to fluid flow features and metadata is extracted from the relevant article. Area of the deposit and landslide runout is determined from the digitized polygons and polylines, volume (if not available) is determined from area and mean thickness. If the latter is not available, the volume is determined from the Area-Volume relationship for landslides where volume has already been determined. When the data originates directly from geophysical records the outline and scars have been determined from geomorphological interpretation of swath bathymetric maps and interpretation of submarine landslides on a variety of seismic records. In such instances, age information originates from a variety of methods presenting a wide range of accuracies, from radiometric dating to well-seismic correlation as well as ages inferred from mean sedimentation rates. In many instances, landslides identified in the literature are dated with an age epoch only., Data compilation has been possible thanks to projects: Submarine landslides and Their impact on European continental margins (SLATE) - H2020-MSCA-ITN-2016-721403. ImagiNg large SeismogenIc and tsunamiGenic structures of the Gulf of Cadiz with ultra-High resolution Technologies (INSIGHT). - CTM2015-70155-R., With the institutional support of the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000928-S), The Euro-Mediterranean Submarine landSlide database (EMSS21) is a catalogue of submarine landslides of the Mediterranean Sea and the European continental margins of the Atlantic and Arctic Oceans. The catalogue is compiled from data available in the literature as well as information collected from geophysical data and not published in the scientific literature. The data set includes polygons and polylines for the landslide deposits and landslide scars as well as information relative to age, volume, area, runout, thickness, typology, scar elevation, geological setting, depth, slope, inferred trigger mechanism, relationship to fluid flow features as well as the relevant metadata. The catalogue includes submarine landslides that span the Miocene to Present day. Nevertheless a clear bias exist towards submarine landslides of younger age, particularly for the smaller events, as theseevents are difficult to map/identify on lower resolution geophysical data sets typically collected in deep-water and large sub-surface depths. The catalogue aims to offer improved understanding of mass-wasting processes, the potentially resulting tsunamis and derived geohazard., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A mixed turbidite - contourite system related to a major submarine canyon: The Marquês de Pombal Drift (south-west Iberian margin)

  • Mencaroni, Davide
  • Urgeles, Roger
  • Camerlenghi, Angelo
  • Llopart, Jaume
  • Ford, Jonathan
  • Sànchez-Serra, Cristina
  • Meservy, William
  • Gràcia, Eulàlia
  • Rebesco, Michele
  • Zitellini, Nevio
28 pages, 10 figures, 1 table, supporting information https://doi.org/10.1111/sed.12844.-- Data availability The data that support the findings of this study are available from the corresponding author upon reasonable request., Synchronous interaction between bottom currents and turbidity currents has been reported often in channel–levée systems where the thickness of the turbidity currents exceeds that of the levées. Such interplay between along-slope and down-slope sedimentary processes is one of the mechanisms by which ‘mixed turbidite–contourite systems’ can originate. However, bottom currents flow over large areas of the seafloor, including continental slopes characterized by deeply incised submarine canyons rather than channel levées. In these cases, a direct interaction between along-slope and down-slope currents is, theoretically, unlikely to take place. In this study, oceanographic, swath bathymetry, multichannel seismic data and sediment cores are used to investigate a 25 km long, 10 km wide and up to 0.5 km thick deep-sea late Quaternary deposit that sits adjacent to the north-west flank of one of the major canyons in the North Atlantic, the São Vicente Canyon, in the Alentejo Basin (south-west Iberian margin). The area receives the influence of a strong bottom current, the Mediterranean Outflow Water, which has swept the continental slope at different water depth ranges during glacial and interglacial periods. Architectural patterns and sediment characteristics suggest that this sedimentary body, named Marquês de Pombal Drift, is the result of the interaction between the Mediterranean Outflow Water (particularly during cold periods) and turbidity currents flowing along the São Vicente Canyon. Because the canyon is incised significantly deeper (ca 1.5 km) than the thickness of turbidity currents, an additional process, in comparison to earlier models, is needed to allow the interaction with the Mediterranean Outflow Water and transport sediment out of the canyon. In the São Vicente Canyon, and likely in other canyons worldwide, interaction of turbidity currents with contour currents requires intermediate nepheloid layers that export the finer-grained fraction of turbidity currents out of the canyon at the boundary between major water masses, This research received funding by the European Union’s Horizon 2020 research and innovating programme under the Marie Sklodowska-Curie grant via project ITN-SLATE (grant agreement No 721403). The Spanish “Ministerio de Ciencia e Innovación” and the European Regional Development Fund are also acknowledged for funding through grant CTM2015-70155-R (project INSIGHT), With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000928-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Tesis doctoral (DoctoralThesis)

Pore pressure build-up in mixed contourite-turbidite systems: the SW Iberian margin

  • Mencaroni, Davide
Memoria de tesis doctoral presentada por Davide Mencaroni para obtener el título de Doctor en Ciències de la Terra por la Universitat de Barcelona (UB), realizada bajo la dirección del Dr. Roger Urgeles Esclasans y del Dr. Jaume Llopart Serra del Institut de Ciències del Mar (ICM-CSIC).-- 251 pages, figures, tables, Contourite drifts are the depositional expression of bottom currents, which are capable of shaping the morphology of the seafloor by transporting, eroding and reworking marine sediments, and are distributed on continental slopes worldwide. Synchronous interaction between bottom currents and turbidity currents have been reported often in channel-levée systems where the thickness of the turbidity current exceeds that of the levées. Such interplay between along-slope and down-slope sedimentary process is one of the mechanisms by which “mixed turbidite-contourite systems” can originate. Being composed by the winnowed finest part of turbidity currents and potentially able to deposit at sedimentation rates of several m/kyr, mixed systems constitute a potential source of overpressure development in marine sediments. The Alentejo basin is located in the northern edge of the Gulf of Cadiz (SW Iberian margin), from which is separated by the São Vicente Canyon, one of the most prominent geomorphological features in SW Iberia. The area is characterized by an extensive contourite depositional system, generated by the Mediterranean Outflow Water (MOW) bottom current. The Alentejo basin hosts multiple mass transport deposits (MTDs) and scars, which are typically considered to be triggered by the frequent seismic activity related to the movement of multiple active faults present in the area. The combined presence of a contourite depositional system, a deeply incised canyon, mass wasting processes and potentially seismogenic faults makes the Alentejo basin the ideal study area to assess: a) how does contour currents interact with sediments transported along deeply incised canyons? b) How does mixed contourite – turbidite systems affect the development of overpressure within marine sediments, and consequently the stability of submarine slopes? [...], This research received funding by the European Union’s Horizon 2020 research and innovating program under the Marie Sklodowska-Curie grant via project ITN-SLATE (grant agreement No 721403). The Spanish “Ministerio de Ciencia e Innovación” and the European Regional Development Fund are also acknowledged for funding through grant CTM2015-70155-R (project INSIGHT), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On the Inference of Tsunami Uncertainties From Landslide Run-Out Observations

  • Zengaffinen, Thomas
  • Urgeles, Roger
  • Løvholt, Finn
30 pages, 19 figures, 1 table.-- Data Availability Statement: The following key data set are used and made available in this paper: The new landslide database covering the Gulf of Cadiz is available through the following repository (Urgeles et al., 2021). The main outputs from the simulation, that is, those displayed in in Figures 9-12 and 14-19 are available through (Zengaffinen-Morris, 2022). The landslide model BingClaw has been published previously in the AGU journal Geophysical Research Letters, with the availability statement given in (Løvholt et al., 2017). Please note that the entire data set resulting from the model simulations, exceed 1 TB and is hence too large to place in a public repository. Hence, only the main outputs from the simulations are made available here, Probabilistic tsunami hazard analysis (PTHA) due to submarine landslides is much less developed than PTHA for earthquake sources. This is partly because of less constrained data available for quantifying source probability, and partly because of the lack of knowledge related to the tsunami generation process due to landslide dynamics. This study provides a basis for estimating the uncertainty related to landslide dynamics for PTHA from submarine landslides based on a new landslide database in the Gulf of Cadiz. The establishment of this new database is described herein. We use submarine landslide run-out statistics from this database to calibrate landslide parameters and related uncertainties employing the cohesive landslide model BingClaw. In turn, coupling the landslide motion to tsunami genesis is performed in order to characterize the inferred tsunami uncertainties. Important parameters that can explain the large tsunami uncertainties are the initial water depth of the landslide, the slope, the landslide volume, and the initial yield strength of the landslide material. Kinematic properties such as the initial landslide acceleration or the Froude number are found to strongly correlate with the tsunami-genesis. In this study, we show how matching numerical landslide models with observed run-out from past events in the field can give information about the uncertainty in their tsunami-genic strength. This can in turn be applied in future PTHA for spanning uncertainty ranges due to the landslide dynamics on tsunami-genesis, constrained by landslide run-out data, This project has received funding from the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 721403. The Spanish “Ministerio de Ciencia e Innovación” and the European Regional Development Fund through grant CTM2015-70155-R (project INSIGHT) and Expert Analytics AS in Oslo are also acknowledged, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

The Euro-Mediterranean Submarine landSlide database (EMSS25) [Dataset]

  • Urgeles, Roger
  • Gamboa, Davide
  • Vila, Carla
  • León Buendía, Ricardo F.
  • Beyer, S.
  • Vanneste, Maarten
  • Forsberg, Carl Fredrick
  • Løvholt, Finn
  • Camerlenghi, Angelo
  • Rüther, Denise C.
  • Omira, Rachid
  • Fantoni, L.
  • Brückner, Nils W.
  • de Pro Díaz, Yolanda
Description of methods used for collection/generation of data: The EMSS21 displays information collected from both the literature and geophysical records. Data from the literature is collected from georeferenced map figures, from which the outline of the landslide deposit and the landslide scar have been digitized. Most information such as age, volume, typology, inferred trigger mechanism and relationship to fluid flow features and metadata is extracted from the relevant article. Area of the deposit and landslide runout is determined from the digitized polygons and polylines, volume (if not available) is determined from area and mean thickness. If the latter is not available, the volume is determined from the Area-Volume relationship for landslides where volume has already been determined. When the data originates directly from geophysical records the outline and scars have been determined from geomorphological interpretation of swath bathymetric maps and interpretation of submarine landslides on a variety of seismic records. In such instances, age information originates from a variety of methods presenting a wide range of accuracies, from radiometric dating to well-seismic correlation as well as ages inferred from mean sedimentation rates. In many instances, landslides identified in the literature are dated with an age epoch only.-- Data Quality Assurance: The EMSS25 Data quality control is carried out according to the standards and flow chart established by the EPOS Tsunami Thematic Core Services and based on the principles expressed by the EPOS Data Policy. These can be consulted here: https://www.tsunamidata.org/organization/data-quality-assurance.-- Disclaimer: The EMSS25 is open to later additions and improvements. For these reasons and due to its intrinsic nature, the EMSS25 cannot be guaranteed to be complete, accurate and updated in any part, and will be subjected to successive revisions. Although the Institut de Ciències del Mar of CSIC makes every effort to supply the best available information, no warranty, expressed or implied, is provided as to the accuracy and reliability of all the data supplied in the EMSS25. Users are cautioned to consider carefully the nature of the data and information before using it for decisions that concern personal or public safety. Conclusions drawn from the EMSS25, or actions undertaken on the basis of its contents, are the sole responsibility of the user, The Euro-Mediterranean Submarine landSlide database (EMSS25) is a catalogue of several morphological and sedimentary features of submarine landslides of the Mediterranean Sea and the Atlantic and Arctic continental margins of Europe. It also contains limited information from other areas of the world oceans. The catalogue is compiled from results in the scientific literature as well as information collected from geophysical data and not published yet. The data set includes polygons and polylines for the landslide deposits, landslide source areas and landslide scars as well as information relative to age, volume, area, runout, thickness, typology, scar elevation, depth, slope as well as relevant metadata. Deposits, sources and scars are linked/related by the MatchingID field. The catalogue includes submarine landslides that span the Miocene to Present day. Nevertheless a clear bias exist towards submarine landslides of younger age and large size. Smaller events, particularly older than Holocene events, are difficult to map/identify on lower resolution geophysical data sets typically collected in deep-water and large sub-surface depths and are likely underrepresented in the database. The catalogue aims to offer improved understanding of mass-wasting processes, the potentially resulting tsunamis and derived geohazard, Geosphere INfrastructures for QUestions into Integrated REsearch (Geo-INQUIRE) - HORIZON-INFRA-2021-SERV-01-101058518; Korea Institute of Geosciences and Mineral Resources (KIGAM); MArine Geo-hazards InduCed by underwater LANDslides in the SW Iberian Margin (MAGICLAND) - PTDC/CTA-GEO/30381/2017 Fundação para a Ciência e a Tecnologia (Portugal); Submarine landslides and Their impact on European continental margins (SLATE) - H2020-MSCA-ITN-2016-721403 European Commission; ImagiNg large SeismogenIc and tsunamiGenic structures of the Gulf of Cadiz with ultra-High resolution Technologies (INSIGHT) - CTM2015-70155-R Ministerio de Economía y Competitividad (España), With the institutional support of the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000928-S), 1. Number of variables: 104; 2. Number of cases/rows: 16091; 3. Variable List: Scar {Id, MatchingID, Name, Latitude, Longitude, MinDepth, MaxDepth, SlopeHeadS, SlHeScMeta, MaxScarHt, MeanScarHt, ScarHtMeta, EvacHeight, EvacHtMeta, Source1, Source2, Source3, Source4, HoriResol, VertiResol, PubSource1, PubSource2, PubSource3, PubSource4, Notes, Operator}; Source area {Id, MatchingID, Name, Longitude, Latitude, MinDepth, MaxDepth, Min_Slope, Max_Slope, Avg_Slope, SlopeMeta, LengthSh2D, LengthMeta, SourceWidt, WidthMeta, MaxScarHt, MeanScarHt, ScarHtMeta, SourceArea, SourceVolu, VolumMeta, Burial_m, Burial_T, BurialMeta, SedRate, SedRateSTD, SedRateMet, Age_BP, AgeMeta, AgeError, AgErMet, AgePeriod, Source1, Source2, Source3, Source4, HoriResol, VertiResol, PubSource1, PubSource2, PubSource3, PubSource4, Notes, Operator}; Deposits {Id, MatchingID, Name, Typology, Longitude, Latitude, MinDepth, MaxDepth, Min_Slope, Max_Slope, Avg_Slope, SlopeMeta, SlopeToe, SlopeToeMe, LengthSh2D, LengthMeta, AvgWidth_m, MaxWidth, WidthMeta, MaxThick_m, MeanThik_m, MaxThick_T, MeanThik_T, Thick_meta, Area_km2, Volume_km3, VolumeMeta, Burial_m, Burial_T, BurialMeta, SedRate, SedRateSTD, SedRateMet, Age_BP, AgeMeta, AgeError, AgErMet, AgePeriod, Source1, Source2, Source3, Source4, HoriResolu, VertiResol, PubSource1, PubSource2, PubSource3, PubSource4, Notes, Operator}, Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Probabilistic mapping of earthquake-induced submarine landslide susceptibility in the South-West Iberian margin

  • Collico, Stefano
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
  • Urgelés Esclasans, Roger
  • Gràcia Mont, Eulàlia
  • Devincenzi, M.J.
  • Pérez García, Norma
The SW Iberian continental margin is well recognized as a tectonically active area, where major canyons and mass wasting events are both present. Earthquake triggered submarine landslides may cause tsunami and result in catastrophic damage to bordering coastal areas. In this setting, submarine landslide susceptibility mapping represents a major step towards a regional risk mitigation strategy. Landslide susceptibility mapping in large offshore areas presents significant challenges as a result of the limited information on controlling variables, large uncertainties in triggering mechanisms and limited geotechnical data. In this study, a geotechnical model-based approach has been followed that narrows the range of controlling factors and, within a probabilistic framework, allows a systematic treatment of parameter uncertainties. This model-based analysis covers the whole SW Iberian margin increasing by three orders of magnitude the areal extent of precedent offshore slope stability susceptibility studies. This jump in spatial scale is facilitated by application of a systematic Bayesian updating procedure, to combine geotechnical information from global databases and that available from regional sites. Seismic shaking is estimated using an available regional database of seismogenic faults. These tools are implemented within a GIS to generate, via Montecarlo simulations, probabilistic landslide susceptibility maps based on two different analytical seismic infinite slope stability models. These models differ mainly in the form of their final results, either as distributions of slope stability safety factors or as distributions of seismic-triggered slope displacements. Receiving Operator Curves are used to assess the different landslide susceptibility predictions obtained against a comprehensive regional database of submarine landslides. It turns out that the models analyzed correctly predict 92% and 82% of the mapped landslide subset chosen for validation for pseudo-static and displacement-based method respectively. This suggests that, within the limits of the currently available databases, seismic events are the dominant factor at the origin of the submarine landslides mapped in the study area. An advantage of the framework presented is that it can quickly incorporate new regional geotechnical information or better regional landslide databases, as they become available., This research received funding from the European Union's Horizon 2020 research and innovating programme under the Marie Sklodowska-Curie grant agreement No 721403. The Spanish “Ministerio de Ciencia e Innovación” and the European Regional Development Fund through grant CTM2015-70155-R (project INSIGHT) are also acknowledged., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Bayesian mixture analysis of a global database to improve unit weight prediction from CPTu

  • Collico, Stefano
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
Empirical correlations between different geotechnical parameters are frequently sought after by exploiting multivariate databases. An example are estimations of total unit weight from cone penetration tests (CPTu), which are very useful in earlier design stages. If the underlying soil database includes data from many different soils a single correlation may lack precision. Precision is gained when the underlying database is narrowed down to some specific soil type, but the applicability of a soil-specific correlation is also limited. A way out of this dilemma is to apply clustering techniques to a general database before developing separate correlations for different clusters. Projecting the clustered data back to a convenient classification space (e.g., one spanned by normalized CPTu metrics) new data can be easily assigned to different clusters and the appropriate correlation used. This idea is illustrated here using Bayesian Mixture Analysis (BMA) to identify hidden soil classes within a general geotechnical database that supports correlations between soil total unit weight and CPTu readings. It is shown that BMA supported clustering improves the accuracy of previous regressions, and, more importantly, facilitates the formulation of novel and more accurate regressions. A simple discriminant criterion is developed to facilitate application of cluster-based regressions to new sites. The good performance of the method is illustrated with application to a deltaic site., This research received funding from the European Union's Horizon 2020 research and innovating programme under the Marie Sklodowska-Curie grant agreement No 721403. Financial support of Ministerio de Ciencia e Innovación of Spain through research project PID2020-119598RB-I00 is gratefully appreciated, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

A simple approach to probabilistic CPTu-based geotechnical stratigraphic profiling

  • Collico, Stefano
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
  • Devincenzi, Marcelo
Geotechnical profile delineation is an important aspect of the geotechnical engineering design process. The Cone Penetration Test (CPTu) is widely used for this purpose, as it is simple to classify soils based on their different responses to the cone. However, CPTu-based delineations typically involve engineering interpretation, as they are affected by the classification scheme applied, by inherent soil variability and by measurements error. A semi-automated CPTu data treatment tool is here presented aiming to simplify the soil delineation task, adding consistency and transparency to the involved engineering interpretation process and facilitating the transference of information between the different parties involved in design. The tool fits bivariate normal distributions to interpreted CPTu data according to some user specified criteria that quantify estimated classification and measurement uncertainties. Classification makes use of conventional class boundaries –here taken from Robertson, 1990 chart-, which are applied with user-specified refinement. Thin layers are consolidated into adjacent ones to further simplify the resulting profile. The operation of the proposed algorithm is illustrated by interpreting CPTu records from a deltaic sedimentary environment. The outputs of this simple method may be used as input for more advanced probabilistic methodologies, helping thus to bridge the gap between qualitative practice and quantitative research methods., This research received funding from the European Union’s Horizon 2020 research and innovating programme under the Marie Sklodowska-Curie grant agreement No 721403. Financial support of Ministerio de Ciencia e Innovación of Spain through research project PID2020-119598RB-I00 is gratefully appreciated., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Probabilistic mapping of earthquake-induced submarine landslide susceptibility in the South-West Iberian margin

  • Collico, Stefano
  • Arroyo Álvarez de Toledo, Marcos
  • Urgelés Esclasans, Roger
  • Gràcia Mont, Eulàlia
  • Devincenzi, M.J.
  • Pérez García, Norma
The SW Iberian continental margin is well recognized as a tectonically active area, where major canyons and mass wasting events are both present. Earthquake triggered submarine landslides may cause tsunami and result in catastrophic damage to bordering coastal areas. In this setting, submarine landslide susceptibility mapping represents a major step towards a regional risk mitigation strategy. Landslide susceptibility mapping in large offshore areas presents significant challenges as a result of the limited information on controlling variables, large uncertainties in triggering mechanisms and limited geotechnical data. In this study, a geotechnical model-based approach has been followed that narrows the range of controlling factors and, within a probabilistic framework, allows a systematic treatment of parameter uncertainties. This model-based analysis covers the whole SW Iberian margin increasing by three orders of magnitude the areal extent of precedent offshore slope stability susceptibility studies. This jump in spatial scale is facilitated by application of a systematic Bayesian updating procedure, to combine geotechnical information from global databases and that available from regional sites. Seismic shaking is estimated using an available regional database of seismogenic faults. These tools are implemented within a GIS to generate, via Montecarlo simulations, probabilistic landslide susceptibility maps based on two different analytical seismic infinite slope stability models. These models differ mainly in the form of their final results, either as distributions of slope stability safety factors or as distributions of seismic-triggered slope displacements. Receiving Operator Curves are used to assess the different landslide susceptibility predictions obtained against a comprehensive regional database of submarine landslides. It turns out that the models analyzed correctly predict 92% and 82% of the mapped landslide subset chosen for validation for pseudo-static and displacement-based method respectively. This suggests that, within the limits of the currently available databases, seismic events are the dominant factor at the origin of the submarine landslides mapped in the study area. An advantage of the framework presented is that it can quickly incorporate new regional geotechnical information or better regional landslide databases, as they become available., This research received funding from the European Union's Horizon 2020 research and innovating programme under the Marie Sklodowska-Curie grant agreement No 721403. The Spanish “Ministerio de Ciencia e Innovación” and the European Regional Development Fund through grant CTM2015-70155-R (project INSIGHT) are also acknowledged., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Bayesian mixture analysis of a global database to improve unit weight prediction from CPTu

  • Collico, Stefano
  • Arroyo Álvarez de Toledo, Marcos
Empirical correlations between different geotechnical parameters are frequently sought after by exploiting multivariate databases. An example are estimations of total unit weight from cone penetration tests (CPTu), which are very useful in earlier design stages. If the underlying soil database includes data from many different soils a single correlation may lack precision. Precision is gained when the underlying database is narrowed down to some specific soil type, but the applicability of a soil-specific correlation is also limited. A way out of this dilemma is to apply clustering techniques to a general database before developing separate correlations for different clusters. Projecting the clustered data back to a convenient classification space (e.g., one spanned by normalized CPTu metrics) new data can be easily assigned to different clusters and the appropriate correlation used. This idea is illustrated here using Bayesian Mixture Analysis (BMA) to identify hidden soil classes within a general geotechnical database that supports correlations between soil total unit weight and CPTu readings. It is shown that BMA supported clustering improves the accuracy of previous regressions, and, more importantly, facilitates the formulation of novel and more accurate regressions. A simple discriminant criterion is developed to facilitate application of cluster-based regressions to new sites. The good performance of the method is illustrated with application to a deltaic site., This research received funding from the European Union's Horizon 2020 research and innovating programme under the Marie Sklodowska-Curie grant agreement No 721403. Financial support of Ministerio de Ciencia e Innovación of Spain through research project PID2020-119598RB-I00 is gratefully appreciated, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A simple approach to probabilistic CPTu-based geotechnical stratigraphic profiling

  • Collico, Stefano
  • Arroyo Álvarez de Toledo, Marcos
  • Devincenzi, Marcelo
Geotechnical profile delineation is an important aspect of the geotechnical engineering design process. The Cone Penetration Test (CPTu) is widely used for this purpose, as it is simple to classify soils based on their different responses to the cone. However, CPTu-based delineations typically involve engineering interpretation, as they are affected by the classification scheme applied, by inherent soil variability and by measurements error. A semi-automated CPTu data treatment tool is here presented aiming to simplify the soil delineation task, adding consistency and transparency to the involved engineering interpretation process and facilitating the transference of information between the different parties involved in design. The tool fits bivariate normal distributions to interpreted CPTu data according to some user specified criteria that quantify estimated classification and measurement uncertainties. Classification makes use of conventional class boundaries –here taken from Robertson, 1990 chart-, which are applied with user-specified refinement. Thin layers are consolidated into adjacent ones to further simplify the resulting profile. The operation of the proposed algorithm is illustrated by interpreting CPTu records from a deltaic sedimentary environment. The outputs of this simple method may be used as input for more advanced probabilistic methodologies, helping thus to bridge the gap between qualitative practice and quantitative research methods., This research received funding from the European Union’s Horizon 2020 research and innovating programme under the Marie Sklodowska-Curie grant agreement No 721403. Financial support of Ministerio de Ciencia e Innovación of Spain through research project PID2020-119598RB-I00 is gratefully appreciated., Peer Reviewed, Postprint (author's final draft)