Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Geomechanical response of fractured reservoirs

  • Zareidarmiyan, Ahmad
  • Salarirad, Hossein
  • Vilarrasa, Víctor
  • De Simone, Silvia
  • Olivella, Sebastià
Geologic carbon storage will most likely be feasible only if carbon dioxide (CO2) is utilized for improved oil recovery (IOR). The majority of carbonate reservoirs that bear hydrocarbons are fractured. Thus, the geomechanical response of the reservoir and caprock to IOR operations is controlled by pre-existing fractures. However, given the complexity of including fractures in numerical models, they are usually neglected and incorporated into an equivalent porous media. In this paper, we perform fully coupled thermo-hydro-mechanical numerical simulations of fluid injection and production into a naturally fractured carbonate reservoir. Simulation results show that fluid pressure propagates through the fractures much faster than the reservoir matrix as a result of their permeability contrast. Nevertheless, pressure diffusion propagates through the matrix blocks within days, reaching equilibrium with the fluid pressure in the fractures. In contrast, the cooling front remains within the fractures because it advances much faster by advection through the fractures than by conduction towards the matrix blocks. Moreover, the total stresses change proportionally to pressure changes and inversely proportional to temperature changes, with the maximum change occurring in the longitudinal direction of the fracture and the minimum in the direction normal to it. We find that shear failure is more likely to occur in the fractures and reservoir matrix that undergo cooling than in the region that is only affected by pressure changes. We also find that stability changes in the caprock are small and its integrity is maintained. We conclude that explicitly including fractures into numerical models permits identifying fracture instability that may be otherwise neglected., A.Z. acknowledges the financial support received from the “Iran’s Ministry of Science, Research and Technology” (Ph.D. students’ sabbatical grants). V.V. acknowledges financial support from the “ZoDrEx” project, which has been subsidized through the ERANET Cofund GEOTHERMICA (Project No. 731117), from the European Commission and the Spanish Ministry of Economy, Industry and Competitiveness (MINECO)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

CO2 Injection Effect on Geomechanical and Flow Properties of Calcite-Rich Reservoirs

  • Kim, Kiseok
  • Vilarrasa, Víctor
  • Makhnenko, Roman Y.
Geologic carbon storage is considered as a requisite to effectively mitigate climate change, so large amounts of carbon dioxide (CO2) are expected to be injected in sedimentary saline formations. CO2 injection leads to the creation of acidic solution when it dissolves into the resident brine, which can react with reservoir rock, especially carbonates. We numerically investigated the behavior of reservoir-caprock system where CO2 injection-induced changes in the hydraulic and geomechanical properties of Apulian limestone were measured in the laboratory. We found that porosity of the limestone slightly decreases after CO2 treatment, which lead to a permeability reduction by a factor of two. In the treated specimens, calcite dissolution was observed at the inlet, but carbonate precipitation occurred at the outlet, which was closed during the reaction time of three days. Additionally, the relative permeability curves were modified after CO2–rock interaction, especially the one for water, which evolved from a quadratic to a quasi-linear function of the water saturation degree. Geomechanically, the limestone became softer and it was weakened after being altered by CO2. Simulation results showed that the property changes occurring within the CO2 plume caused a stress redistribution because CO2 treated limestone became softer and tended to deform more in response to pressure buildup than the pristine rock. The reduction in strength induced by geochemical reactions may eventually cause shear failure within the CO2 plume affected rock. This combination of laboratory experiments with numerical simulations leads to a better understanding of the implications of coupled chemo-mechanical interactions in geologic carbon storage., Research by K. Kim and R. Makhnenko was funded as part of the Center for Geologic Storage of CO2, an Energy Frontier Research Center funded by the U.S. Department of Energy (DOE), Office of Science, Basic Energy Sciences (BES), under Award #DE-SC0C12504. Financial support for V. Vilarrasa was from the “ZoDrEx” project, which has been subsidized through the ERANET Cofund GEOTHERMICA (Project No. 731117), from the European Commission and the Spanish Ministry of Economy, Industry and Competitiveness (MINECO)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Numerical modeling of hydraulic stimulation of fractured crystalline rock at the bedretto underground laboratory for geosciences and geoenergies

  • Vaezi, Iman
  • Alcolea, Andrés
  • Meier, Peter
  • Parisio, Francesco
  • Carrera, Jesús
  • Vilarrasa, Víctor
© 2024 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)., Hydraulic stimulation of Enhanced Geothermal Systems (EGS) aims at boosting permeability to facilitate fluid circulation, while keeping a low induced seismicity. However, some stimulations have led to poor permeability enhancement or too high induced earthquakes, which suggests that further understanding is needed on poromechanical processes during stimulation. Here, we model a highly-monitored test performed at the Bedretto Underground Laboratory to investigate the impact of fluid injection on permeability enhancement and induced microseismicity. We examine three models: (1) a homogeneous fracture whose transmissivity is manually calibrated to reproduce the observed pressure evolution at the injection borehole (this model fails to capture the spatial distribution of pressure and the corresponding poromechanical processes); (2) an elastic fracture approach, where transmissivity changes locally as a function of fracture aperture following the cubic law (this model overestimates pressure after the onset of fracture slip); and (3) a viscoplastic fracture approach with strain weakening and dilatancy that yields an additional permeability enhancement after shear reactivation. The viscoplastic model captures the spatio-temporal coupled response of the fractured rock to hydraulic stimulation before and after shearing both in terms of pressure and microseismicity. Subsequently to the onset of shear failure, microseismic events occur in every injection cycle as the reactivation front advances when plastic strain and, thus, permeability surpass the previously achieved maximum value. This viscoplastic model permits estimating the extent of the stimulated fracture, the permeability enhancement and its impact on the local state of stress and pore pressure at surrounding fractures, representing a useful tool for the design of effective hydraulic stimulation., I.V. and V.V. acknowledge funding from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Program through the Starting Grant GEoREST (www.georest.eu), under grant agreement No. 801809. The work of Geo-Energie Suisse AG was financially supported by the Swiss Federal Office of Energy within the framework of the ZoDrEx GEOTHERMICA project under contract SI/501720-01. F.P. and V.V. acknowledge funding from the European Union’s Horizon 2020 Research and Innovation Program through the Marie Sklowdowska-Curie Individual Fellowship ARMISTICE, under Grant Agreement No. 882733. J.C. and V.V. acknowledges financial support from the “ZoDrEx” project, which has been subsidized through the ERANET Cofund GEOTHERMICA (Project No. 731117), from the European Commission and the Spanish Ministry of Economy, Industry and Competitiveness (MINECO). IMEDEA is an accredited "Maria de Maeztu Excellence Unit" (Grant CEX2021-001198, funded by MCIN/AEI/10.13039/501100011033). IDAEA-CSIC is a Center of Excellence Severo Ochoa (Spanish Ministry of Science and Innovation, Project CEX2018-000794-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001198)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2018-000794-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Implicit hydromechanical representation of fractures using a continuum approach

  • Vaezi, Iman
  • Parisio, Francesco
  • Yoshioka, Keita
  • Alcolea, Andrés
  • Meier, Peter
  • Carrera, Jesús
  • Olivella, Sebastià
  • Vilarrasa, Víctor
Fractures control fluid flow, solute transport, and mechanical deformation in crystalline media. They can be modeled numerically either explicitly or implicitly via an equivalent continuum. The implicit framework implies lower computational cost and complexity. However, upscaling heterogeneous fracture properties for its implicit representation as an equivalent fracture layer remains an open question. In this study, we propose an approach, the Equivalent Fracture Layer (EFL), for the implicit representation of fractures surrounded by low-permeability rock matrix to accurately simulate hydromechanical coupled processes. The approach assimilates fractures as equivalent continua with a manageable scale (≫1 μm) that facilitates spatial discretization, even for large-scale models including multiple fractures. Simulation results demonstrate that a relatively thick equivalent continuum layer (in the order of cm) can represent a fracture (with aperture in the order of μm) and accurately reproduce the hydromechanical behavior (i.e., fluid flow and deformation/stress behavior). There is an upper bound restriction due to the Young's modulus because the equivalent fracture layer should have a lower Young's modulus than that of the surrounding matrix. To validate the approach, we model a hydraulic stimulation carried out at the Bedretto Underground Laboratory for Geosciences and Geoenergies in Switzerland by comparing numerical results against measured data. The method further improves the ability and simplicity of continuum methods to represent fractures in fractured media., I.V. and V.V. acknowledge funding from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Program through the Starting Grant GEoREST ( www.georest.eu ), under grant agreement No. 801809. J.C. and V.V. acknowledge financial support from the “ZoDrEx” project, which has been subsidized through the ERANET Cofund GEOTHERMICA (Project no. 731117), from the European Commission and the Spanish Ministry of Economy, Industry and Competitiveness (MINECO). The work of Geo-Energie Suisse AG was financially supported by the Swiss Federal Office of Energy within the framework of the ZoDrEx GEOTHERMICA project under contract SI/501720-01. F. P. acknowledges funding from the European Union's Horizon 2020 Research and Innovation Program through the Marie Sklowdowska-Curie Individual Fellowship ARMISTICE, Spain under Grant Agreement No. 882733. K.Y. acknowledges funding from EURAD, the European Joint Programme on Radioactive Waste Management through the project DONUT (Grant No 847593 ). IMEDEA is an accredited "Maria de Maeztu Excellence Unit" (Grant CEX2021-001198 , funded by MCIN/AEI/10.13039/501100011033). IDAEA-CSIC is a Center of Excellence Severo Ochoa (Spanish Ministry of Science and Innovation, Project CEX2018-000794-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Stochastic poromechanical analysis forecasts a notable exceedance probability for the 2017 Pohang, South Korea, Mw 5.5 earthquake

  • Wu, Haiqing
  • Vilarrasa, Víctor
  • Parisio, Francesco
  • Alcolea, Andrés
  • Meier, Peter
  • Carrera, Jesús
  • Saaltink, Maarten W.
The 2017 Pohang Mw 5.5 earthquake is currently the largest seismic event induced by Enhanced Geothermal Systems. The high uncertainty on geological and mechanical conditions of the rupture fault of this earthquake has originated a debate on its triggering mechanisms. Here, we propose a stochastic poromechanical analysis approach that combines Monte Carlo sampling and poromechanical models to address the uncertainty problem. By conducting a large number of coupled poromechanical simulations varying the uncertain geomechanical parameters, we yield an exceedance probability of 7%-15% for the Pohang mainshock. Remarkably, this physics-based stochastic prior forecast is quite comparable to the posterior likelihood inferred from the magnitude-frequency relationship of recorded seismicity. Our results reveal a scaling relationship between the earthquake magnitude and the initial fault stability, which indicates a threshold of the initial Coulomb Failure Stress to differentiate if faults are initially, critically stressed, and thus, the earthquake magnitude. This Pohang threshold is −0.2 to −0.1 MPa, about one order of magnitude larger than that proposed for natural earthquakes. This study highlights that the reactivation of critically stressed faults may trigger damaging earthquakes even for small poromechanical perturbations and opens a promising avenue for assessing the likelihood of induced earthquakes based on physical understanding., H.W. acknowledge the financial support of the Secretariat for Universities and Research of the Ministry of Business and Knowledge of the Government of Catalonia (AGAUR) and the European Social Fund (FI−2019). H.W. also acknowledges the Becas Santander Research Scholarship from the Technical University of Catalonia (UPC) and the Santander. V.V. acknowledges funding from the European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation Program through the Starting Grant GEoREST (www.georest.eu) under Grant agreement No. 801809 and support from the Spanish Ministry of Science, Innovation and Universities through project HydroPoreII (PID2022-137652NB-C44). IMEDEA is an accredited “Maria de Maeztu Excellence Unit” (Grant CEX2021-001198, funded by MICIU/AEI/10.13039/501100011033). V.V. and F.P. acknowledge funding from the European Union’s Horizon 2020 Research and Innovation Program through the Marie Sklodowska-Curie Action ARMISTICE under grant agreement No. 882733. A.A. and P.M. acknowledge the financial support from the Swiss Federal Office of Energy within the framework of the ZoDrEx GEOTHERMICA project under contract SI/501720-01. M.S. acknowledges financial support from the “HEATSTORE” project (170153–44011), which has been subsidized through the ERANET Cofund GEOTHERMICA (Grant agreement no. 731117), from the European Commission and the Spanish Ministry of Science, Innovation and Universities (PCI2018-092933). J.C. acknowledges support of the EU through “Eastern Lights” project under Grant Agreement number 101136122., With funding from the Spanish government through the "Maria de Maeztu Centre of Excellence" accreditation (CEX2021-001198)., Peer reviewed