Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Borehole observation-based in situ stress state estimation of the Los Humeros geothermal field (Mexico)

  • Kruszewski, Michal
  • Montegrossi, Giordano
  • Parisio, Francesco
  • Saenger, Erik H.
In this study, we present results of an in situ stress state estimation for the Los Humeros geothermal field (Mexico) located in the eastern section of the Trans-Mexican Volcanic Belt. During more than 40 years of geothermal energy production, issues related to induced seismicity, reservoir depletion, subsidence, and wellbore stability have occurred in Los Humeros. The in situ stress tensor, being one of the major controls on the above-mentioned phenomena, remains highly uncertain. The high temperatures of the geothermal reservoir at Los Humeros, often exceeding the critical point of water, promote difficulties in performing in situ stress measurements. In this study, based on data commonly acquired from drilling operations from eleven high-temperature wells within the Los Humeros caldera, we constrain the in situ stress state of the geothermal field. For this purpose, we employ borehole observations including borehole breakouts, instances of fluid circulation loss, and injection tests. Results from this study indicate predominantly strike-slip regime with a strong reverse component and NE-SW acting maximum horizontal stress. Utilizing slip and dilation tendency analysis, permeability and seismic activity of major fault zones within the geothermal field could be aptly explained by the acting stress regime. The outcome of this study provides valuable insights into the in situ stress state of the Los Humeros caldera and supports the exploration of conventional and unconventional (i.e., supercritical) geothermal resources., This work was carried out within the framework of the GEMex (Cooperation in Geothermal energy research Europe-Mexico for development of Enhanced Geothermal Systems and Superhot Geothermal Systems) project, which received funding from the European Union’s Horizon 2020 research and innovation program under Grant Agreement No 727550. M.K. and E.H.S acknowledge funding from the German Federal Ministry of Education and Research (BMBF) and geomecon GmbHfor the 3DRuhrMarie (“FHprofUnt2016”) project. F.P. acknowledges funding from the European Union’s Horizon 2020 Research and Innovation Programme under Marie Sklodowska-Curie Action ARMISTICE with grant agreement No. 882733., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A seismic-properties and wave-propagation analysis for the long-term monitoring of supercritical geothermal systems

  • Farina, Biancamaria
  • Parisio, Francesco
  • Poletto, Flavio
This study is focused on the modeling of the seismic response in a supercritical geothermal system subjected to a long-term cold and isothermal re-injection during 20 years of exploitation. The modeling aims to assess the usability of seismic-methods for monitoring supercritical geothermal reservoir. We use a synthetic data set for the analysis of the seismic properties of the reservoir: pressure and temperature evolution is derived from a previous numerical study of a two-dimensional supercritical reservoir with pure water as the pore fluid. We calculate the related variations in time of the seismic properties of the reservoir saturated-rock formation using the Burgers–Gassmann mechanical model to evaluate the effects of high temperature on the rock frame, and to account for fluid-properties variations. We observe that, at the analyzed pressure and temperature conditions, the seismic properties of the reservoir formation are mainly determined by the thermophysical characteristics of the pore fluid. During the long-term cold re-injection we observe a decrease in the compressional seismic velocity in the cooled area near the injection well, with a radius that increases in time. We use a 2D full-waveform propagation algorithm based on the Burgers–Gassmann model to calculate synthetic signals in a single-well acquisition layout, with a time step of half year. We observe that in the cool injection scenario the changes in the anomalous area can be seismically monitored, while in the case of isothermal injection, changes due to the re-injection are not seismically appreciable., Francesco Parisio acknowledges funding from the European Union’s Horizon 2020 Research and Innovation Program through the Marie Sklowdowska-Curie Individual Fellowship ARMISTICE, Spain under Grant Agreement No. 882733.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Dataset for Numerical modeling of hydraulic stimulation of fractured crystalline rock at the Bedretto Underground Laboratory for Geosciences and Geoenergies

  • Vaezi, Iman
  • Alcolea, Andrés
  • Meier, Peter
  • Parisio, Francesco
  • Carrera, Jesús
  • Vilarrasa, Víctor
[Date of data collection] Feb. 2020 for field data and Jan. 2022- Jan. 2023 for numerical models., This dataset includes the input files of the numerical models used in the manuscript for simulating the hydraulic stimulation at the Bedretto lab. Each folder is named after the corresponding model in the manuscript, i.e., EP (Elastic Prescribed), EE (Elastic Embedded), and VE (Viscoplastic Embedded). In each folder, there is a file with the name of the folder ended as “_gen.dat” which contains the input data of the model, including material properties, initial and boundary conditions and the time intervals. There is also a file ended as “_gri.dat” that includes the information on the mesh. The file “root.dat” includes the name of the model. The file ended as “_bcf.dat” contains injection rate input., European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation Program through the Starting Grant GEoREST (www.georest.eu), under grant agreement No. 801809. Swiss Federal Office of Energy within the framework of the ZoDrEx GEOTHERMICA project under contract SI/501720-01. European Union’s Horizon 2020 Research and Innovation Program through the Marie Sklowdowska-Curie Individual Fellowship ARMISTICE, under Grant Agreement No. 882733. The “ZoDrEx” project, which has been subsidized through the ERANET Cofund GEOTHERMICA (Project No. 731117), from the European Commission and the Spanish Ministry of Economy, Industry and Competitiveness (MINECO). IMEDEA is an accredited "Maria de Maeztu Excellence Unit" (Grant CEX2021-001198, funded by MCIN/AEI/10.13039/501100011033)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001198)., 1-EP_bcf.dat 1-EP_gen.dat 1-EP_gri.dat root.dat 2-EE_bcf.dat 2-EE_gen.dat 2-EE_gri.dat root.dat 3-VE_bcf.dat 3-VE_gen.dat 3-VE_gri.dat root.dat 3-VE-Extended_bcf.dat 3-VE-Extended_gen.dat 3-VE-Extended_gri.dat root.dat, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Global physics-based database of injection-induced seismicity

  • Kivi, Iman Rahimzadeh
  • Boyet, Auregan
  • Wu, Haiqing
  • Walter, Linus
  • Hanson-Hedgecock, Sara
  • Parisio, Francesco
  • Vilarrasa, Víctor
Fluid injection into geological formations for energy resource development frequently induces (micro)seismicity. Moderate- to large-magnitude induced earthquakes may cause injuries and/or economic loss, with the consequence of jeopardizing the operation and future development of these geo-energy projects. To achieve an improved understanding of the mechanisms of induced seismicity, develop forecasting tools and manage the associated risks, it is necessary to carefully examine seismic data from reported cases of induced seismicity and the parameters controlling them. However, these data are challenging to gather together and are time-consuming to collate as they come from different disciplines and sources. Here, we present a publicly available, multi-physical database of injection-induced seismicity (Kivi et al., 2022a; 10.20350/digitalCSIC/14813), sourced from an extensive review of published documents. Currently, it contains 158 datasets of induced seismicity caused by various subsurface energy-related applications worldwide. Each dataset covers a wide range of variables, delineating general site information, host rock properties, in situ geologic and tectonic conditions, fault characteristics, conducted field operations, and recorded seismic activities. We publish the database in flat-file formats (i.e., .xls and .csv tables) to facilitate its dissemination and utilization by geoscientists while keeping it directly readable by computer codes for convenient data manipulation. The multi-disciplinary content of this database adds unique value to databases focusing only on seismicity data. In particular, the collected data aim at facilitating the understanding of the spatiotemporal occurrence of induced earthquakes, the diagnosis of potential triggering mechanisms, and the development of scaling relations of maximum possible earthquake magnitudes and operational parameters. The database will boost research in seismic hazard forecasting and mitigation, paving the way for increasing contributions of geo-energy resources to meeting net-zero carbon emissions., The authors acknowledge funding from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Program through the starting grant GEoREST (http://www.georest.eu, last access: 23 July 2023) under grant agreement no. 801809. Iman R. Kivi and Victor Vilarrasa also acknowledge support by the PCI2021-122077-2B project (http://www.easygeocarbon.com, last access: 23 July 2023), funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR. Haiqing Wu acknowledges the financial support received from the Secretariat for Universities and Research of the Ministry of Business and Knowledge of the Government of Catalonia (AGAUR) and the European Social Fund (FI-2019). Haiqing Wu also acknowledges the Becas Santander Research Scholarship from the Technical University of Catalonia (UPC) and Santander. Francesco Parisio and Victor Vilarrasa acknowledge funding from the European Union's Horizon 2020 Research and Innovation Programme through the Marie Skłodowska-Curie Action ARMISTICE under grant agreement no. 882733. IDAEA-CSIC is a Centre of Excellence Servero Ochoa (Spanish Ministry of Science and Innovation, grant no. CEX2018-000794-S, funded by MCIN/AEI/10.13039/501100011033). IMEDEA is an accredited “Maria de Maeztu Excellence Unit” (grant no. CEX2021-001198, funded by MCIN/AEI/10.13039/501100011033)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2018-000794-S)., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2021-001198-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Dataset for Effectiveness of Injection protocols for hydraulic stimulation in Enhanced Geothermal Systems

  • Tangirala, Sri Kalyan
  • Parisio, Francesco
  • Vaezi, Iman
  • Vilarrasa, Víctor
This dataset includes the input files of the numerical models used in the manuscript for simulating the hydraulic stimulation in Enhanced Geothermal System with a single fracture setup. Each folder is named after the corresponding injection protocol in the manuscript, i.e., Constant, Step, and Cyclic. In each of these folders, there are two subfolders namely- Without Bleedoff and With Bleedoff. In the subfolders, the file ending with “_gen.dat” contains the input data of the model, including material properties, initial and boundary conditions and the time intervals. There is also a file ending with “_gri.dat” that includes the information on the mesh. The file “root.dat” includes the name of the model., European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation Program through the Starting Grant GEoREST (www.georest.eu), under grant agreement No. 801809. European Union’s Horizon 2020 Research and Innovation Program through the Marie Sklowdowska-Curie Individual Fellowship ARMISTICE, under Grant Agreement No. 882733. IMEDEA is an accredited "Maria de Maeztu Excellence Unit" (Grant CEX2021-001198, funded by MCIN/AEI/10.13039/501100011033)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (Grant CEX2021-001198)., README.txt (this file) Constant_0p3_gen.dat Constant_0p3_gri.dat root.dat Constant_0p3_bleedoff_gen.dat Constant_0p3_bleedoff_gri.dat root.dat Step_0p3_gen.dat Step_0p3_gri.dat root.dat Step_0p3_bleedoff_gen.dat Step_0p3_bleedoff_gri.dat root.dat Cyclic_0p3_gen.dat Cyclic_0p3_gri.dat root.dat Cyclic_0p3_bleedoff_gen.dat Cyclic_0p3_bleedoff_gri.dat root.dat, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Implicit hydromechanical upscaling of fractures using a continuum approach [Dataset]

  • Vaezi, Iman
  • Parisio, Francesco
  • Yoshioka, Keita
  • Alcolea, Andrés
  • Meier, Peter
  • Carrera, Jesús
  • Olivella, Sebastià
  • Vilarrasa, Víctor
Any usage of field data should aquire permission from Geo-Energie Suisse., This dataset includes the input files of the numerical models used in the manuscript for simulating the hydraulic stimulation in the conceptual models as well as the Bedretto model with the executable file of the numerical code (CODE_BRIGHT). Each folder is named after the corresponding model in the manuscript described in the sections 3.1.1 and 3.2.1. In each folder, there is a file with the name of the folder ended as “_gen.dat” which contains the input data of the model, including material properties, initial and boundary conditions and the time intervals. There is also a file ended as “_gri.dat” that includes the information on the mesh. The file “root.dat” includes the name of the model. The file ended as “_bcf.dat” contains injection rate input for Bedretto model. To run the simulation, copy and paste Code_Bright executable file, i.e., “Cb_2021.exe”, in a folder that contains the input files and execute it., European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation Program through the Starting Grant GEoREST (www.georest.eu), under grant agreement No. 801809. Swiss Federal Office of Energy within the framework of the ZoDrEx GEOTHERMICA project under contract SI/501720-01. European Union’s Horizon 2020 Research and Innovation Program through the Marie Sklowdowska-Curie Individual Fellowship ARMISTICE, under Grant Agreement No. 882733. The “ZoDrEx” project, which has been subsidized through the ERANET Cofund GEOTHERMICA (Project No. 731117), from the European Commission and the Spanish Ministry of Economy, Industry and Competitiveness (MINECO). EURAD, the European Joint Programme on Radioactive Waste Management through the project DONUT (Grant No 847593), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Numerical modeling of hydraulic stimulation of fractured crystalline rock at the bedretto underground laboratory for geosciences and geoenergies

  • Vaezi, Iman
  • Alcolea, Andrés
  • Meier, Peter
  • Parisio, Francesco
  • Carrera, Jesús
  • Vilarrasa, Víctor
© 2024 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)., Hydraulic stimulation of Enhanced Geothermal Systems (EGS) aims at boosting permeability to facilitate fluid circulation, while keeping a low induced seismicity. However, some stimulations have led to poor permeability enhancement or too high induced earthquakes, which suggests that further understanding is needed on poromechanical processes during stimulation. Here, we model a highly-monitored test performed at the Bedretto Underground Laboratory to investigate the impact of fluid injection on permeability enhancement and induced microseismicity. We examine three models: (1) a homogeneous fracture whose transmissivity is manually calibrated to reproduce the observed pressure evolution at the injection borehole (this model fails to capture the spatial distribution of pressure and the corresponding poromechanical processes); (2) an elastic fracture approach, where transmissivity changes locally as a function of fracture aperture following the cubic law (this model overestimates pressure after the onset of fracture slip); and (3) a viscoplastic fracture approach with strain weakening and dilatancy that yields an additional permeability enhancement after shear reactivation. The viscoplastic model captures the spatio-temporal coupled response of the fractured rock to hydraulic stimulation before and after shearing both in terms of pressure and microseismicity. Subsequently to the onset of shear failure, microseismic events occur in every injection cycle as the reactivation front advances when plastic strain and, thus, permeability surpass the previously achieved maximum value. This viscoplastic model permits estimating the extent of the stimulated fracture, the permeability enhancement and its impact on the local state of stress and pore pressure at surrounding fractures, representing a useful tool for the design of effective hydraulic stimulation., I.V. and V.V. acknowledge funding from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Program through the Starting Grant GEoREST (www.georest.eu), under grant agreement No. 801809. The work of Geo-Energie Suisse AG was financially supported by the Swiss Federal Office of Energy within the framework of the ZoDrEx GEOTHERMICA project under contract SI/501720-01. F.P. and V.V. acknowledge funding from the European Union’s Horizon 2020 Research and Innovation Program through the Marie Sklowdowska-Curie Individual Fellowship ARMISTICE, under Grant Agreement No. 882733. J.C. and V.V. acknowledges financial support from the “ZoDrEx” project, which has been subsidized through the ERANET Cofund GEOTHERMICA (Project No. 731117), from the European Commission and the Spanish Ministry of Economy, Industry and Competitiveness (MINECO). IMEDEA is an accredited "Maria de Maeztu Excellence Unit" (Grant CEX2021-001198, funded by MCIN/AEI/10.13039/501100011033). IDAEA-CSIC is a Center of Excellence Severo Ochoa (Spanish Ministry of Science and Innovation, Project CEX2018-000794-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001198)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2018-000794-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effectiveness of injection protocols for hydraulic stimulation in enhanced geothermal systems

  • Tangirala, Sri Kalyan
  • Parisio, Francesco
  • Vaezi, Iman
  • Vilarrasa, Víctor
© 2024 The Author(s). Published by Elsevier Ltd. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/)., To harness the immense potential of geothermal energy for non-intermittent baseload power, low-permeability crystalline hot rocks need to be hydraulically stimulated to create Enhanced Geothermal Systems (EGS) that enable economically profitable fluid flow rates. However, hydraulic stimulation is usually associated with seismic activity that has led to project cancellation in a few occasions. To improve our understanding of the coupled hydro-mechanical (HM) processes behind stimulation during both injection and post-injection stages (after shut-in), we numerically analyze three different stimulation protocols: constant-rate, step-rate, and cyclic injection with and without bleed-off after shut-in (and between cycles for the cyclic protocol). Simulation results show that the injection protocol has a higher influence on the HM response of the fracture than the total volume of injected water, which challenge scaling laws that relate the injection volume with the expected maximum magnitude of the induced earthquakes. The trade-off between maximizing permeability enhancement, while minimizing induced seismicity is not straightforward. In particular, bleeding-off the well after injection restricts induced seismicity, but at the expenses of limiting permeability enhancement. When considering stimulation of a single fault, all protocols yield comparable slip rates and, thus, magnitude of the induced earthquake, with the constant-rate injection being the fastest to induce the largest earthquake. The small differences in the HM response to hydraulic stimulation do not permit identifying a protocol that performs better than the others., European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Program, grant agreement no. 801809. Marie Sklodowska-Curie Action Individual Fellowship, grant agreement no. 882733. Maria de Maeztu Excellence Unit (CEX2021-001198/AEI/10.13039/501100011033)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001198)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Stochastic poromechanical analysis forecasts a notable exceedance probability for the 2017 Pohang, South Korea, Mw 5.5 earthquake

  • Wu, Haiqing
  • Vilarrasa, Víctor
  • Parisio, Francesco
  • Alcolea, Andrés
  • Meier, Peter
  • Carrera, Jesús
  • Saaltink, Maarten W.
The 2017 Pohang Mw 5.5 earthquake is currently the largest seismic event induced by Enhanced Geothermal Systems. The high uncertainty on geological and mechanical conditions of the rupture fault of this earthquake has originated a debate on its triggering mechanisms. Here, we propose a stochastic poromechanical analysis approach that combines Monte Carlo sampling and poromechanical models to address the uncertainty problem. By conducting a large number of coupled poromechanical simulations varying the uncertain geomechanical parameters, we yield an exceedance probability of 7%-15% for the Pohang mainshock. Remarkably, this physics-based stochastic prior forecast is quite comparable to the posterior likelihood inferred from the magnitude-frequency relationship of recorded seismicity. Our results reveal a scaling relationship between the earthquake magnitude and the initial fault stability, which indicates a threshold of the initial Coulomb Failure Stress to differentiate if faults are initially, critically stressed, and thus, the earthquake magnitude. This Pohang threshold is −0.2 to −0.1 MPa, about one order of magnitude larger than that proposed for natural earthquakes. This study highlights that the reactivation of critically stressed faults may trigger damaging earthquakes even for small poromechanical perturbations and opens a promising avenue for assessing the likelihood of induced earthquakes based on physical understanding., H.W. acknowledge the financial support of the Secretariat for Universities and Research of the Ministry of Business and Knowledge of the Government of Catalonia (AGAUR) and the European Social Fund (FI−2019). H.W. also acknowledges the Becas Santander Research Scholarship from the Technical University of Catalonia (UPC) and the Santander. V.V. acknowledges funding from the European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation Program through the Starting Grant GEoREST (www.georest.eu) under Grant agreement No. 801809 and support from the Spanish Ministry of Science, Innovation and Universities through project HydroPoreII (PID2022-137652NB-C44). IMEDEA is an accredited “Maria de Maeztu Excellence Unit” (Grant CEX2021-001198, funded by MICIU/AEI/10.13039/501100011033). V.V. and F.P. acknowledge funding from the European Union’s Horizon 2020 Research and Innovation Program through the Marie Sklodowska-Curie Action ARMISTICE under grant agreement No. 882733. A.A. and P.M. acknowledge the financial support from the Swiss Federal Office of Energy within the framework of the ZoDrEx GEOTHERMICA project under contract SI/501720-01. M.S. acknowledges financial support from the “HEATSTORE” project (170153–44011), which has been subsidized through the ERANET Cofund GEOTHERMICA (Grant agreement no. 731117), from the European Commission and the Spanish Ministry of Science, Innovation and Universities (PCI2018-092933). J.C. acknowledges support of the EU through “Eastern Lights” project under Grant Agreement number 101136122., With funding from the Spanish government through the "Maria de Maeztu Centre of Excellence" accreditation (CEX2021-001198)., Peer reviewed