Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The risks of long-term re-injection in supercritical geothermal systems

  • Parisio, Francesco
  • Vilarrasa, Víctor
  • Wang, Wenqing
  • Kolditz, Olaf
  • Nagel, Thomas
Supercritical geothermal systems are appealing sources of sustainable and carbon-free energy located in volcanic areas. Recent successes in drilling and exploration have opened new possibilities and spiked interest in this technology. Experimental and numerical studies have also confirmed the feasibility of creating fluid conducting fractures in sedimentary and crystalline rocks at high temperature, paving the road towards Enhanced Supercritical Geothermal Systems. Despite their attractiveness, several important questions regarding safe exploitation remain open. We dedicate this manuscript to the first thermo-hydro-mechanical numerical study of a doublet geothermal system in supercritical conditions. Here we show that thermally-induced stress and strain effects dominate the geomechanical response of supercritical systems compared to pore pressure-related instabilities, and greatly enhance seismicity during cold water re-injection. This finding has important consequences in the design of Supercritical Geothermal Systems., The contribution of F.P. is funded by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) - project number PA 3451/1-1 and by the GEMex project, which is supported by the European Union’s Horizon 2020 programme for Research and Innovation under grant agreement No 727550. V.V. acknowledges funding from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Programme through the Starting Grant GEoREST, grant agreement No. 801809 (http://www.georest.eu). The contribution of W.W. is funded by the Advanced Earth System Modelling Capacity (ESM) project by the Helmholtz Association., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Borehole observation-based in situ stress state estimation of the Los Humeros geothermal field (Mexico)

  • Kruszewski, Michal
  • Montegrossi, Giordano
  • Parisio, Francesco
  • Saenger, Erik H.
In this study, we present results of an in situ stress state estimation for the Los Humeros geothermal field (Mexico) located in the eastern section of the Trans-Mexican Volcanic Belt. During more than 40 years of geothermal energy production, issues related to induced seismicity, reservoir depletion, subsidence, and wellbore stability have occurred in Los Humeros. The in situ stress tensor, being one of the major controls on the above-mentioned phenomena, remains highly uncertain. The high temperatures of the geothermal reservoir at Los Humeros, often exceeding the critical point of water, promote difficulties in performing in situ stress measurements. In this study, based on data commonly acquired from drilling operations from eleven high-temperature wells within the Los Humeros caldera, we constrain the in situ stress state of the geothermal field. For this purpose, we employ borehole observations including borehole breakouts, instances of fluid circulation loss, and injection tests. Results from this study indicate predominantly strike-slip regime with a strong reverse component and NE-SW acting maximum horizontal stress. Utilizing slip and dilation tendency analysis, permeability and seismic activity of major fault zones within the geothermal field could be aptly explained by the acting stress regime. The outcome of this study provides valuable insights into the in situ stress state of the Los Humeros caldera and supports the exploration of conventional and unconventional (i.e., supercritical) geothermal resources., This work was carried out within the framework of the GEMex (Cooperation in Geothermal energy research Europe-Mexico for development of Enhanced Geothermal Systems and Superhot Geothermal Systems) project, which received funding from the European Union’s Horizon 2020 research and innovation program under Grant Agreement No 727550. M.K. and E.H.S acknowledge funding from the German Federal Ministry of Education and Research (BMBF) and geomecon GmbHfor the 3DRuhrMarie (“FHprofUnt2016”) project. F.P. acknowledges funding from the European Union’s Horizon 2020 Research and Innovation Programme under Marie Sklodowska-Curie Action ARMISTICE with grant agreement No. 882733., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The influence of alteration and fractures on gas permeability and mechanical properties of the sedimentary and volcanic rocks of the Acoculco Caldera Complex (México)

  • Ramírez Guzmán, Ángel
  • Pola, A.
  • Macías, Jose Luis
  • Soto Herrera, Andrés Mauricio
  • Avellán, Denis Ramón
  • Pacheco Valdovinos, Pedro Martín
  • Martínez-Martínez, Javier
[EN] Petrophysical and mechanical properties of limestones and volcanic altered and unaltered rocks were estimated by a series of laboratory measurements. The aim of this work was to study the changes in matrix permeability and the influence of an induced vertical fracture. The phenomenon was studied by direct comparison of different properties (porosity, UCS, permeability) and by a multiple linear regression analysis. Porosity, UCS, and matrix permeability of limestones and non-altered volcanic rocks showed homogeneous values. However, the permeability increased from poor to moderate after fracture induction (10–17 to 10–14 m2). Altered volcanic specimens showed a more complex pore system. Thus, considerable variations in all measured properties were identified. For example, porosity ranged from 6 to 50% and Permeability ranged from 10–14 to 10–12 m2. Comparison plots including UCS, porosity, and matrix permeability showed a good fitting (R 2=0.75). Multiple linear regression analysis in fractured specimens has a moderate R 2 (0.55) The model that better explains the permeability evolution of fractured specimens has the fracture permeability as the response variable and the porosity values as independent variables. The usage and repeatability of these equations in other zones should include more singularities of every single specimen as pore size, pore distribution, and fractures., This work was supported by the project titled Cooperation in Geothermal energy research Mexico-Europe for the development of Enhanced Geothermal Systems and Superhot Geothermal Systems (GEMex) (268074)., Peer reviewed