Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Sub-ns-pulsed laser cleaning of an archaeological bone from the Sierra de Atapuerca, Spain: a case study

  • Rahman, Md. Ashiqur
  • Fuente, Germán F. de la
  • Carretero, José Miguel
  • Maina Maingi, Evan
  • Alonso Abad, María Pilar
  • Alonso Alcalde, Rodrigo
  • Chapoulie, Rémy
  • Schiavon, Nick
  • Angurel, Luis A.
Controlled laser irradiation parameters using recently developed sub-nanosecond pulsed laser technology with emission wavelength in the near Infrared regime (1064 nm) have been assessed on a Pleistocene bone from the archaeological site of Sierra de Atapuerca, Spain. Burst pulse mode was employed to explore contaminant removal efficiency, while at the same time, assessing the degree of damage produced to the underlying original substrate surface. The surface morphology and composition of the deteriorated bone have been characterized, along with the effects of laser irradiation at 1064 nm, using Optical Microscopy (OM), Scanning Electron Microscopy–with Energy Dispersive X-ray Spectrometry (SEM–EDS), and X-ray Photoelectron Spectroscopy (XPS). The most effective laser cleaning parameters in burst mode have been identified in order to optimize the emission parameters of the laser, thus localizing its interaction within the outermost layers of contaminants and degradation products, avoiding damage to the underlying original bone surface. Hence, threshold cleaning and substrate damage values have been determined for this new sub-ns laser, paving the way to safer laser cleaning procedures that may be useful for the effective conservation of bone archaeological artifacts., Project supported by H2020-MSCA-ITN-EJD/ED-ARCHMAT action funding under the Marie Skłodowska-Curie grant agreement, no 766311. Partial support obtained from Departamento de Ciencia, Universidad y Sociedad del Conocimiento of Gobierno de Aragón “Construyendo Europa desde Aragón” (research group T54_20R). The Atapuerca research project is financed by Ministerio de Ciencia, Innovación y Universidades project PGC 2018-093925-B-C33. Fieldwork at the Atapuerca sites is funded by the Junta de Castilla y León and the Fundación Atapuerca. The fossil analysed in this work was made available by the Laboratory of Human Evolution of the University of Burgos, in close collaboration with the “Colección Museística de Castilla y León” of the Junta de Castilla y León; we acknowledge Professor Juan Luis Arsuaga for the permit to analyse the sample. The use of Servicio General de Apoyo a la Investigación and the National Facility ELECMI ICTS, node “Laboratorio de Microscopías Avanzadas” at the University of Zaragoza is acknowledged. This work is part of the ongoing collaboration between INMA (CSIC-University of Zaragoza) and University of Burgos, under the auspices of Unidad Asociada de I+D+i al CSIC “Vidrio y Materiales del Patrimonio Cultural (VIMPAC)”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Historical stained-glass window laser preservation: The heat accumulation challenge, Conservación de vidrieras históricas con tecnologías láser: el reto de limitar la acumulación de calor

  • Maina Maingi, Evan
  • Alonso Abad, María Pilar
  • Angurel, Luis A.
  • Rahman, Md. Ashiqur
  • Chapoulie, Rémy
  • Dubernet, Stéphan
  • Fuente, Germán F. de la
[EN] Stained-glass windows form an important part of cultural heritage. Short pulse lasers open new opportunities for safe decontamination. In this work, and for the first time, the interaction of sub-nanosecond and femtosecond pulsed lasers with some contemporary stained-glasses has been analyzed exploring their applicability to safely clean stained-glass windows. The results show that, in these materials, damage can be induced using energy levels below damage thresholds due to the heat accumulation in the coating layer that is being eliminated. The latter generates significant thermal stresses on the glass volume, which induce crack formation. In consequence, in order to apply safe stained-glass cleaning protocols, laser parameters have to be selected to control the temperature increase within this layer. To achieve the latter goal, two alternative irradiation procedures were explored in this work. As a first option, a reduction of the effective pulse repetition frequency to values lower than 20 kHz was applied. A second alternative was used for lasers with pulse repetition rates in the hundreds of kHz. In this case, the burst mode was employed controlling the number of pulses emitted and combined with an adequate time lapse selection between two consecutive burst runs. A proof of concept demonstration was carried out on a stained-glass sample from the Cathedral of Cuenca, dated at the end of the XV century., [ES] Las vidrieras constituyen un elemento esencial de nuestro patrimonio cultural. Los láseres de pulsos ultracortos ofrecen nuevas oportunidades para desarrollar procesos de restauración seguros. En este trabajo, por primera vez, se estudia la interacción de láseres pulsados emitiendo pulsos en el rango de los subnanosegundos y femtosegundos con piezas de vidrieras contemporáneas, con el fin de explorar la posibilidad de desarrollar procesos seguros de restauración de vidrieras. Los resultados muestran que, en estos materiales, incluso trabajando con niveles de energía por debajo de los umbrales de daño, se puede generar deterioro por la acumulación de calor generada en la capa que se está eliminando, lo cual puede generar niveles de tensiones térmicas que provocan la ruptura del vidrio. Por tanto, para desarrollar protocolos de limpieza seguros, los parámetros de procesado deben escogerse de tal manera que se minimice la temperatura que se alcanza en esta capa. Se han explorado dos alternativas. Una es reducir la frecuencia de trabajo hasta valores por debajo de los 20 kHz. En el caso de láseres que trabajen a frecuencias más elevadas, la alternativa es trabajar en modo burst, limitando el número de pulsos en cada serie y estableciendo tiempos de espera entre dos series. Estas ideas se han aplicado sobre una pieza de vidriera de la Catedral de Cuenca de finales del siglo XV., This work was supported by European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement N.° 766311. Partial support is obtained from Gobierno de Aragón “Construyendo Europa desde Aragón” (research group T54_20R). The use of Servicio General de Apoyo a la Investigación at the University of Zaragoza is acknowledged. This work has been performed in the framework of the Unidad Asociada de I+D+I al CSIC “Vidrio y Materiales del Patrimonio Cultural (VIMPAC)”, by INMA (CSIC-University of Zaragoza) and University of Burgos., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Chemical and laser cleaning of corrosion encrustations on historical stained glass: A comparative study

  • Maina Maingi, Evan
  • Alonso Abad, María Pilar
  • Angurel, Luis A.
  • Fuente, Germán F. de la
  • Dubernet, Stéphan
  • Chapoulie, Rémy
  • Mellouët, Oriane
  • Vally, Elodie
This article belongs to the Special Issue Cleaning Strategies for Cultural Heritage., The aim of this research work was to conduct a comparative study on the effectiveness of the application of chemical cleaning versus laser cleaning in the removal of surface congruent dissolution products from a potash-lime–silica historical stained-glass sample. EDTA was selected as the chemical cleaning agent. Laser cleaning was performed using a 238 fs pulse UV (343 nm) laser. The comparative cleaning studies were carried out on a stained-glass piece supplied by the Maison Lorin Glass Restoration Workshop from Chartres, France. Given the complex nature, irregular thickness and heterogeneity of the encrustations found on the glass, the two cleaning approaches were carefully performed step by step, while monitoring the process using an optical microscope. Raman spectroscopy and field emission scanning electron microscopy were used to characterize the changes induced on the sample surface during the cleaning process. The results demonstrate that the two cleaning approaches were able to eliminate the outer surface dark layer associated with carbon compounds, as well as the external part of the white layer generated by the crystallization of salts, formed with the dissolved elements after a reaction with the air. A comparison of the advantages and disadvantages of each method is also presented., This research was funded by the H2020-MSCA-ITN-EJD/ED-ARCHMAT action under the Marie Sklodowska-Curie grant agreement No. 766311. The authors acknowledge the partial support obtained from Gobierno de Aragón (research group T54_20R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ultrashort pulsed Femtosecond UV laser for selective cleaning of significant Cretaceous flints

  • Rahman, Md. Ashiqur
  • Fuente, Germán F. de la
  • Carretero, José Miguel
  • Alonso Abad, María Pilar
  • Navazo Ruiz, Marta
  • Alonso Alcalde, Rodrigo
  • Chapoulie, Rémy
  • Schiavon, Nick
  • Angurel, Luis A.
This work reports on studies aimed to evaluate the utilization of ultrashort 238 fs (fs) pulsed UV laser emission at 343 nm for eliminating colored crusts and surface deposits on significant Cretaceous flint surfaces, in an attempt to safeguard its aesthetic appearance and archaeological value. The results indicate that fs UV lasers may be an ideal, non-contact tool for selective surface cleaning of sensitive archaeological artefacts, since they enable contaminant desorption while avoiding photothermal damage., Project supported by H2020-MSCA-ITN-EJD/ED-ARCHMAT funding under the Marie Skłodowska-Curie Actions grant agreement, No. 766311 and by Gobierno de Aragón (research group T54_20R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ultra-short pulse laser cleaning of contaminated pleistocene bone: A comprehensive study on the influence of pulse duration and wavelength

  • Rahman, Md. Ashiqur
  • Fuente, Germán F. de la
  • Carretero, José Miguel
  • Alonso Abad, María Pilar
  • Alonso Alcalde, Rodrigo
  • Chapoulie, Rémy
  • Schiavon, Nick
  • Angurel, Luis A.
This article belongs to the Special Issue Cleaning Strategies for Cultural Heritage., The impact of wavelength and pulse duration in laser cleaning of hard blackish contaminants crust from archaeologically significant Pleistocene bone is investigated in this research. The objective is to determine the practical cleaning procedures and identify adequate laser parameters for cleaning archaeological bone from Sima de los Huesos (Spain) based on conservation and restoration perspectives. Bone surface cleaning was performed utilizing two Q-switched Nd:YAG lasers: sub-nanosecond pulsed lasers with emission wavelengths at 355 nm and 1064 nm, respectively, and a Yb:KGW femtosecond pulsed laser with an emission wavelength in the third harmonic at 343 nm. In all experiments, the laser beam scanning mode was applied to measure cleaning efficiency in removing contaminants and degradation products while assessing the underlying substrate surface damage. Several properties, including wavelength-dependent absorption, pulse repetition rate, and thermal properties of the material, are analyzed when evaluating the ability of these lasers to boost the cleaning efficiency of the deteriorated bone surface. Bone surface morphology and composition were studied and compared before and after laser irradiation, using Optical Microscopy, Scanning Electron Microscopy with Energy Dispersive X-ray Spectrometry (SEM-EDS), Fourier Transform Infrared Spectroscopy (FTIR), and X-ray Photoelectron Spectroscopy (XPS) characterization methods. The results indicate that 238-femtosecond UV laser irradiation with 2.37 TWcm−2 is significantly safer and more efficient toward surface contaminant desorption than sub-nanosecond laser irradiation. The results herein presented suggest that these types of fs lasers may be considered for realistic laser conservation of valuable historic and archaeological museum artifacts., This research was funded by the H2020-MSCA-ITN-EJD/ED-ARCHMAT action funding under the Marie Skłodowska-Curie grant agreement, No 766311., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

UV femtosecond laser cleaning of encrusted historical stained-glasses

  • Maina Maingi, Evan
  • Alonso Abad, María Pilar
  • Fuente, Germán F. de la
  • Dubernet, Stéphan
  • Lefrais, Yannick
  • Chapoulie, Rémy
  • Vally, Elodie
  • Angurel, Luis A.
Laser irradiation enables the removal of unwanted surface deposits from different materials in a safe and controllable manner. Laser parameters should be carefully selected to achieve the removal of the target contaminants without inducing damage to the substrate. Ultra-short pulse lasers have opened new opportunities for safe and controlled decontamination of cultural heritage materials because the thickness of material that is affected by the laser is limited. In this study, an ultraviolet femtosecond pulsed laser was used for the removal of unwanted encrustation formed on the surface of an historical colourless stained-glass sample from the Cuenca Cathedral in Spain. One of the sides of this glass exhibits a reddish-brown grisaille that also has to be preserved. A laser cleaning process has been designed to avoid heat accumulation while controlling the thickness of ablated material. In this context, a multi-step process was selected in order to be able to eliminate, in a controlled way, the crust layer without damaging the grisaille layer, or the glass substrate. In this case, laser irradiation in beam scanning mode with a pulse repetition frequency of 10 kHz proved to be effective for the safe cleaning of the glass. The latter was analysed before and after laser cleaning by optical and confocal microscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray fluorescence, and Raman spectroscopy, confirming that the crust layer was effectively eliminated without damaging the surface., This work was supported by H2020-MSCA-ITN-EJD/ED-ARCHMAT action under the Marie Sklodowska-Curie grant agreement no. 766311. Partial support is obtained from Gobierno de Aragón (research group T54_20R). The use of Servicio General de Apoyo a la Investigación at the University of Zaragoza is acknowledged. This work has been performed in the framework of the Unidad Asociada de I+D+I al CSIC “Vidrio y Materiales del Patrimonio Cultural (VIMPAC)”, by INMA (CSIC-University of Zaragoza) and University of Burgos., Peer reviewed
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Artículo científico (JournalArticle)

Ultrashort pulsed Femtosecond UV laser for selective cleaning of significant Cretaceous flints

  • Rahman, Md. Ashiqur
  • Fuente Leis, Germán F. de la
  • Carretero Díaz, José Miguel
  • Alonso Abad, Mª Pilar
  • Navazo Ruiz, Marta
  • Alonso Alcalde, Rodrigo
  • Chapoulie, Rémy
  • Schiavon, Nick
  • Angurel Lámban, Luis Alberto
This work reports on studies aimed to evaluate the utilization of ultrashort 238 fs (fs) pulsed UV laser emission at 343 nm for eliminating colored crusts and surface deposits on significant Cretaceous flint surfaces, in an attempt to safeguard its aesthetic appearance and archaeological value. The results indicate that fs UV lasers may be an ideal, non-contact tool for selective surface cleaning of sensitive archaeological artefacts, since they enable contaminant desorption while avoiding photothermal damage., Project supported by H2020-MSCA-ITN-EJD/ED-ARCHMAT funding under the Marie Skłodowska-Curie Actions grant agreement, No. 766311 and by Gobierno de Aragón (research group T54_20R).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Sub-ns-pulsed laser cleaning of an archaeological bone from the Sierra de Atapuerca, Spain: a case study

  • Rahman, M.A.
  • de la Fuente, G.F.
  • Carretero, J.M.
  • Maingi, E.M.
  • Alonso Abad, M.P.
  • Alonso Alcalde, R.
  • Chapoulie, R.
  • Schiavon, N.
  • Angurel, L.A.
Controlled laser irradiation parameters using recently developed sub-nanosecond pulsed laser technology with emission wavelength in the near Infrared regime (1064 nm) have been assessed on a Pleistocene bone from the archaeological site of Sierra de Atapuerca, Spain. Burst pulse mode was employed to explore contaminant removal efficiency, while at the same time, assessing the degree of damage produced to the underlying original substrate surface. The surface morphology and composition of the deteriorated bone have been characterized, along with the effects of laser irradiation at 1064 nm, using Optical Microscopy (OM), Scanning Electron Microscopy-with Energy Dispersive X-ray Spectrometry (SEM-EDS), and X-ray Photoelectron Spectroscopy (XPS). The most effective laser cleaning parameters in burst mode have been identified in order to optimize the emission parameters of the laser, thus localizing its interaction within the outermost layers of contaminants and degradation products, avoiding damage to the underlying original bone surface. Hence, threshold cleaning and substrate damage values have been determined for this new sub-ns laser, paving the way to safer laser cleaning procedures that may be useful for the effective conservation of bone archaeological artifacts.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Ultrashort pulsed Femtosecond UV laser for selective cleaning of significant Cretaceous flints

  • Rahman, Md. Ashiqur
  • Fuente Leis, Germán Francisco de la
  • Carretero, José Miguel
  • Alonso Abad, Mª Pilar
  • Ruiz Navazo, Marta
  • Alonso Alcalde, Rodrigo
  • Chapoulie, Rémy
  • Schiavon, Nick
  • Angurel, Luis A.
This work reports on studies aimed to evaluate the utilization of ultrashort 238 fs (fs) pulsed UV laser emission at 343 nm for eliminating colored crusts and surface deposits on significant Cretaceous flint surfaces, in an attempt to safeguard its aesthetic appearance and archaeological value. The results indicate that fs UV lasers may be an ideal, non-contact tool for selective surface cleaning of sensitive archaeological artefacts, since they enable contaminant desorption while avoiding photothermal damage.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Chemical and laser cleaning of corrosion encrustations on historical stained glass: a comparative study

  • Maingi, E. M.
  • Alonso, M. P.
  • Angurel, L. A.
  • de la Fuente, G. F.
  • Dubernet, S.
  • Chapoulie, R.
  • Mellouët, O.
  • Vally, E.
The aim of this research work was to conduct a comparative study on the effectiveness of the application of chemical cleaning versus laser cleaning in the removal of surface congruent dissolution products from a potash-lime–silica historical stained-glass sample. EDTA was selected as the chemical cleaning agent. Laser cleaning was performed using a 238 fs pulse UV (343 nm) laser. The comparative cleaning studies were carried out on a stained-glass piece supplied by the Maison Lorin Glass Restoration Workshop from Chartres, France. Given the complex nature, irregular thickness and heterogeneity of the encrustations found on the glass, the two cleaning approaches were carefully performed step by step, while monitoring the process using an optical microscope. Raman spectroscopy and field emission scanning electron microscopy were used to characterize the changes induced on the sample surface during the cleaning process. The results demonstrate that the two cleaning approaches were able to eliminate the outer surface dark layer associated with carbon compounds, as well as the external part of the white layer generated by the crystallization of salts, formed with the dissolved elements after a reaction with the air. A comparison of the advantages and disadvantages of each method is also presented.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

UV femtosecond laser cleaning of encrusted historical stained-glasses

  • Maingi, E. M.
  • Alonso, M. P.
  • Fuente, Germán F. de la
  • Dubernet, S.
  • Lefrais, Y.
  • Chapoulie, R.
  • Vally, E.
  • Angurel, L. A.
Laser irradiation enables the removal of unwanted surface deposits from different materials in a safe and controllable manner. Laser parameters should be carefully selected to achieve the removal of the target contaminants without inducing damage to the substrate. Ultra-short pulse lasers have opened new opportunities for safe and controlled decontamination of cultural heritage materials because the thickness of material that is affected by the laser is limited. In this study, an ultraviolet femtosecond pulsed laser was used for the removal of unwanted encrustation formed on the surface of an historical colourless stained-glass sample from the Cuenca Cathedral in Spain. One of the sides of this glass exhibits a reddish-brown grisaille that also has to be preserved. A laser cleaning process has been designed to avoid heat accumulation while controlling the thickness of ablated material. In this context, a multi-step process was selected in order to be able to eliminate, in a controlled way, the crust layer without damaging the grisaille layer, or the glass substrate. In this case, laser irradiation in beam scanning mode with a pulse repetition frequency of 10 kHz proved to be effective for the safe cleaning of the glass. The latter was analysed before and after laser cleaning by optical and confocal microscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray fluorescence, and Raman spectroscopy, confirming that the crust layer was effectively eliminated without damaging the surface.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Ultra-Short Pulse Laser Cleaning of Contaminated Pleistocene Bone: A Comprehensive Study on the Influence of Pulse Duration and Wavelength

  • Rahman, Md. Ashiqur
  • de la Fuente, Germán F.
  • Miguel Carretero, José
  • Abad, Mª Pilar Alonso
  • Alcalde, Rodrigo Alonso
  • Chapoulie, Rémy
  • Schiavon, Nick
  • Angurel, Luis A.
The impact of wavelength and pulse duration in laser cleaning of hard blackish contaminants crust from archaeologically significant Pleistocene bone is investigated in this research. The objective is to determine the practical cleaning procedures and identify adequate laser parameters for cleaning archaeological bone from Sima de los Huesos (Spain) based on conservation and restoration perspectives. Bone surface cleaning was performed utilizing two Q-switched Nd:YAG lasers: sub-nanosecond pulsed lasers with emission wavelengths at 355 nm and 1064 nm, respectively, and a Yb:KGW femtosecond pulsed laser with an emission wavelength in the third harmonic at 343 nm. In all experiments, the laser beam scanning mode was applied to measure cleaning efficiency in removing contaminants and degradation products while assessing the underlying substrate surface damage. Several properties, including wavelength-dependent absorption, pulse repetition rate, and thermal properties of the material, are analyzed when evaluating the ability of these lasers to boost the cleaning efficiency of the deteriorated bone surface. Bone surface morphology and composition were studied and compared before and after laser irradiation, using Optical Microscopy, Scanning Electron Microscopy with Energy Dispersive X-ray Spectrometry (SEM-EDS), Fourier Transform Infrared Spectroscopy (FTIR), and X-ray Photoelectron Spectroscopy (XPS) characterization methods. The results indicate that 238-femtosecond UV laser irradiation with 2.37 TWcm−2 is significantly safer and more efficient toward surface contaminant desorption than sub-nanosecond laser irradiation. The results herein presented suggest that these types of fs lasers may be considered for realistic laser conservation of valuable historic and archaeological museum artifacts.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Historical stained-glass window laser preservation: The heat accumulation challenge

  • Maingi, E. M.
  • Alonso, M. P.
  • Angurel, L. A.
  • Rahman, M. A.
  • Chapoulie, R.
  • Dubernet, S.
  • de la Fuente, G. F.
Stained-glass windows form an important part of cultural heritage. Short pulse lasers open new opportunities for safe decontamination. In this work, and for the first time, the interaction of sub-nanosecond and femtosecond pulsed lasers with some contemporary stained-glasses has been analyzed exploring their applicability to safely clean stained-glass windows. The results show that, in these materials, damage can be induced using energy levels below damage thresholds due to the heat accumulation in the coating layer that is being eliminated. The latter generates significant thermal stresses on the glass volume, which induce crack formation. In consequence, in order to apply safe stained-glass cleaning protocols, laser parameters have to be selected to control the temperature increase within this layer. To achieve the latter goal, two alternative irradiation procedures were explored in this work. As a first option, a reduction of the effective pulse repetition frequency to values lower than 20 kHz was applied. A second alternative was used for lasers with pulse repetition rates in the hundreds of kHz. In this case, the burst mode was employed controlling the number of pulses emitted and combined with an adequate time lapse selection between two consecutive burst runs. A proof of concept demonstration was carried out on a stained-glass sample from the Cathedral of Cuenca, dated at the end of the XV century. © 2021 SECV