Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Effect of the sampling parameters in FOCV-MPPT circuits for fast-varying EH sources

  • Carandell Widmer, Matias|||0000-0003-0559-4453
  • Holmes, Andrew S.
  • Toma, Daniel|||0000-0003-0472-1190
  • Río Fernández, Joaquín del|||0000-0002-6191-2201
  • Gasulla Forner, Manuel|||0000-0002-0364-6806
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The fractional open circuit voltage (FOCV) method is extensively used in low-power energy harvesting (EH) sources to extract maximum power. For fast-varying EH sources a fast sampling rate is required. This work theoretically analyzes the influence of the sampling time and period on the harvested power of sinusoidal EH sources. In addition, the circuit limitations to achieve a fast sampling rate are presented and circuits to deal with them proposed and implemented. Furthermore, one of the circuits is based on a novel pseudo-FOCV method and achieves the fastest sampling rate. Experimental tests are performed with a 2 Hz, 1 V to 3 V sinusoidal source having an output resistance of 127 ¿, and the results are shown to agree with theoretical predictions. It is shown that 1) the harvested power increases with the sampling rate when the sampling time is negligible (sampling 15 times faster than the source frequency extracts around 99 % of the maximum), and 2) for fixed sampling times there is an optimum sampling rate where the harvested power is maximum. The first result is generic and valid for methods other than the FOCV. Tests were also performed with a small-scale wave energy converter placed in a linear shaker emulating a sea environment. Harvested power increases by 25 % with respect using a commercial FOCV unit with a low sampling rate., This work was supported by the project MELOA from the European Commission’s Horizon 2020 research and Innovation program under Grant Agreement No. 776280 and by the Spanish Ministry of Economy and Competitiveness and the European Regional Development Fund under project TEC2016-76991-P. The first author has a grant from the Secretariat of Universities and Research of the Ministry of Business and Knowledge of the Government of Catalonia on the FI program (ref. BDNS 362582)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Experimental validation of a fast-tracking FOCV-MPPT circuit for a wave energy converter embedded into an oceanic drifter

  • Carandell Widmer, Matias|||0000-0003-0559-4453
  • Toma, Daniel|||0000-0003-0472-1190
  • Holmes, Andrew S.
  • Río Fernández, Joaquín del|||0000-0002-6191-2201
  • Gasulla Forner, Manuel|||0000-0002-0364-6806
Wave Energy Converters (WECs) are an ideal solution for expanding the autonomy of surface sensor platforms such as oceanic drifters. To extract the maximum amount of energy from these fast-varying sources, a fast maximum power point tracking (MPPT) technique is required. Previous studies have examined power management units (PMU) with fast MPPT circuits, but none of them have demonstrated their feasibility in a real-world scenario. In this study, the performance of a fast-tracking fractional open circuit voltage (FOCV)-MPPT circuit (sampling period TMPPT of 48 ms) is compared with a commercial slow-tracking PMU (TMPPT of 16 s) in a monitored sea area while using a small-scale, pendulum-type WEC. A specific low-power relaxation oscillator circuit is designed to control the fast MPPT circuit. The results demonstrate that by speeding up the sampling frequency of the MPPT circuit, the harvested energy can be increased by a factor of three., The first author was supported by the European Union—NextGenerationEU and the Ministerio de Universidades—Plan de Recuperación, Transformación y Resiliencia under a Margarita Salas post-doctoral research fellowship (ref. 2022UPC-MSC-94068). This work was partially supported by the project MELOA from the European Commission’s Horizon 2020 research and Innovation program under Grant Agreement No. 776280. This study was developed using the framework of the Research Unit Tecnoterra (ICM-CSIC/UPC) and the following project activities: PLOME (PLEC2021-007525; Ministerio de Ciencia e Innovación) and BITER (PID2020-114732RB-C32; Ministerio de Ciencia e Innovación)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Design and testing of a kinetic energy harvester embedded into an oceanic drifter

  • Carandell Widmer, Matias|||0000-0003-0559-4453
  • Toma, Daniel|||0000-0003-0472-1190
  • Carbonell Ventura, Montserrat|||0000-0002-5425-1767
  • Río Fernández, Joaquín del|||0000-0002-6191-2201
  • Gasulla Forner, Manuel|||0000-0002-0364-6806
© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., A novel Kinetic Energy Harvester (KEH) has been developed for powering oceanic undrogued drifters. It consists on a double pendulum system capable of transforming the wave oscillations into rotation on a flywheel. This rotation is converted into DC current by an electrical generator and further processed by a power management unit (PMU). The PMU includes a “maximum power point tracking” system to maximize energy production by the generator. An oceanic drifter has also been designed to embed the KEH and a custom-made measurement system to perform real sea tests. It counts on an Inertial Measurement Unit to study the motion of the drifter and an embedded measurement system to estimate the rotation speed of the generator and the power at both the input and output of the PMU. A Wi-Fi connection is also included for data transfer at short distances. The generator was firstly characterized at the laboratory; the drifter was then placed on a linear shaker to assess its performance. Finally, the drifter was deployed in a controlled sea area with average values of wave height and frequency of 1.43 m and 0.29 Hz, respectively. In these conditions, the drifter showed horizontal and vertical oscillations with peak-to-peak accelerations of 0.8 g and power spectra centered around 1.5 Hz and 1 Hz, respectively. As a result, the KEH generated a mean output power of 0.18 mW, with peaks of 2.5 mW., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

The new iteration of the wavy drifter (MELOA)

  • Gonçalves, Pedro
  • Marques, Tiago
  • Loureiro, Bruno
  • Borges de Sousa, João
The MELOA (Multi-purpose/Multi-sensor Extra Light Oceanography Apparatus), H2020 project, proposes to develop a low-cost, easy-to-handle, wave resilient, multi-purpose, multi-sensor, extra light surface drifter for use in all water environments, ranging from deep-sea to inland waters, including coastal areas, river plumes and surf zones. The device will be developed as an upgrade to the WAVY drifter (Figure-1) conceived by the LSTS - Faculty of Engineering of the University of Porto, which was used to measure the surface circulation forced by wave breaking, including detailed structure of rifts and the littoral drift current. The new iteration of the wavy drifter improves upon the older one by adding new functionality like wave spectrum computation from collected data, and adding sensors such as a Inertial Measurement Unit (IMU), Atmospheric Pressure Sensor (ATM), a new and improved GNSS modules with new positioning solutions, a new GSM supporting encrypted GPRS connections for real-time data transmission as well as more internal memory. Furthermore a new MCU (Microcontroller Unit) was chosen to integrate all this sensors and data collection and a new firmware package. To adapt to users’ requests and different mission profiles there are five WAVY models available, all with different sensor packages and functionality: Basic and Litoral for coastal operations, Ocean, Ocean ATMO and Ocean Plus for open sea. For the later a Satellite transceiver is used for communication instead of the GSM module, to transmit the results of wave spectrum computation.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Effect of the sampling parameters in FOCV-MPPT circuits for fast-varying EH sources

  • Carandell Widmer, Matias
  • Holmes, Andrew S.
  • Toma, Daniel
  • Río Fernández, Joaquín del
  • Gasulla Forner, Manuel
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The fractional open circuit voltage (FOCV) method is extensively used in low-power energy harvesting (EH) sources to extract maximum power. For fast-varying EH sources a fast sampling rate is required. This work theoretically analyzes the influence of the sampling time and period on the harvested power of sinusoidal EH sources. In addition, the circuit limitations to achieve a fast sampling rate are presented and circuits to deal with them proposed and implemented. Furthermore, one of the circuits is based on a novel pseudo-FOCV method and achieves the fastest sampling rate. Experimental tests are performed with a 2 Hz, 1 V to 3 V sinusoidal source having an output resistance of 127 ¿, and the results are shown to agree with theoretical predictions. It is shown that 1) the harvested power increases with the sampling rate when the sampling time is negligible (sampling 15 times faster than the source frequency extracts around 99 % of the maximum), and 2) for fixed sampling times there is an optimum sampling rate where the harvested power is maximum. The first result is generic and valid for methods other than the FOCV. Tests were also performed with a small-scale wave energy converter placed in a linear shaker emulating a sea environment. Harvested power increases by 25 % with respect using a commercial FOCV unit with a low sampling rate., This work was supported by the project MELOA from the European Commission’s Horizon 2020 research and Innovation program under Grant Agreement No. 776280 and by the Spanish Ministry of Economy and Competitiveness and the European Regional Development Fund under project TEC2016-76991-P. The first author has a grant from the Secretariat of Universities and Research of the Ministry of Business and Knowledge of the Government of Catalonia on the FI program (ref. BDNS 362582)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Design and testing of a kinetic energy harvester embedded into an oceanic drifter

  • Carandell Widmer, Matias
  • Toma, Daniel
  • Carbonell Ventura, Montserrat
  • Río Fernández, Joaquín del
  • Gasulla Forner, Manuel
© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., A novel Kinetic Energy Harvester (KEH) has been developed for powering oceanic undrogued drifters. It consists on a double pendulum system capable of transforming the wave oscillations into rotation on a flywheel. This rotation is converted into DC current by an electrical generator and further processed by a power management unit (PMU). The PMU includes a “maximum power point tracking” system to maximize energy production by the generator. An oceanic drifter has also been designed to embed the KEH and a custom-made measurement system to perform real sea tests. It counts on an Inertial Measurement Unit to study the motion of the drifter and an embedded measurement system to estimate the rotation speed of the generator and the power at both the input and output of the PMU. A Wi-Fi connection is also included for data transfer at short distances. The generator was firstly characterized at the laboratory; the drifter was then placed on a linear shaker to assess its performance. Finally, the drifter was deployed in a controlled sea area with average values of wave height and frequency of 1.43 m and 0.29 Hz, respectively. In these conditions, the drifter showed horizontal and vertical oscillations with peak-to-peak accelerations of 0.8 g and power spectra centered around 1.5 Hz and 1 Hz, respectively. As a result, the KEH generated a mean output power of 0.18 mW, with peaks of 2.5 mW., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Experimental validation of a fast-tracking FOCV-MPPT circuit for a wave energy converter embedded into an oceanic drifter

  • Carandell Widmer, Matias
  • Toma, Daniel
  • Holmes, Andrew S.
  • Río Fernández, Joaquín del
  • Gasulla Forner, Manuel
Wave Energy Converters (WECs) are an ideal solution for expanding the autonomy of surface sensor platforms such as oceanic drifters. To extract the maximum amount of energy from these fast-varying sources, a fast maximum power point tracking (MPPT) technique is required. Previous studies have examined power management units (PMU) with fast MPPT circuits, but none of them have demonstrated their feasibility in a real-world scenario. In this study, the performance of a fast-tracking fractional open circuit voltage (FOCV)-MPPT circuit (sampling period TMPPT of 48 ms) is compared with a commercial slow-tracking PMU (TMPPT of 16 s) in a monitored sea area while using a small-scale, pendulum-type WEC. A specific low-power relaxation oscillator circuit is designed to control the fast MPPT circuit. The results demonstrate that by speeding up the sampling frequency of the MPPT circuit, the harvested energy can be increased by a factor of three., The first author was supported by the European Union—NextGenerationEU and the Ministerio de Universidades—Plan de Recuperación, Transformación y Resiliencia under a Margarita Salas post-doctoral research fellowship (ref. 2022UPC-MSC-94068). This work was partially supported by the project MELOA from the European Commission’s Horizon 2020 research and Innovation program under Grant Agreement No. 776280. This study was developed using the framework of the Research Unit Tecnoterra (ICM-CSIC/UPC) and the following project activities: PLOME (PLEC2021-007525; Ministerio de Ciencia e Innovación) and BITER (PID2020-114732RB-C32; Ministerio de Ciencia e Innovación)., Peer Reviewed, Postprint (published version)