Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 21
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Optimum MPPT strategy for low-power pendulum-type wave energy converters

  • Carandell Widmer, Matias|||0000-0003-0559-4453
  • Toma, Daniel|||0000-0003-0472-1190
  • Río Fernández, Joaquín del|||0000-0002-6191-2201
  • Gasulla Forner, Manuel|||0000-0002-0364-6806
© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Maximum Power Point Tracking (MPPT) techniques for low-power pendulum-type Wave Energy Converters were evaluated. A Kinetic Energy Harvester previously designed, together with a Power Management Unit, were tested on a linear shaker to compare three MPPT techniques, the Constant Voltage versus two variants of the Fractional Open Circuit Voltage (FOCV). Results show a 25% improvement on the scavenged energy with one of the proposed FOCV techniques with respect to the other ones., This work was supported by the project MELOA from the European Commission’s Horizon 2020 research and Innovation program under Grant Agreement No. 776825 and by the Spanish Ministry of Economy and Competitiveness and the European Regional Development Fund under project TEC2016-76991-P. The first author has a grant from the Secretariat of Universities and Research of the Ministry of Business and Knowledge of the Government of Catalonia on the FI program (ref. BDNS 362582)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Effect of the sampling parameters in FOCV-MPPT circuits for fast-varying EH sources

  • Carandell Widmer, Matias|||0000-0003-0559-4453
  • Holmes, Andrew S.
  • Toma, Daniel|||0000-0003-0472-1190
  • Río Fernández, Joaquín del|||0000-0002-6191-2201
  • Gasulla Forner, Manuel|||0000-0002-0364-6806
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The fractional open circuit voltage (FOCV) method is extensively used in low-power energy harvesting (EH) sources to extract maximum power. For fast-varying EH sources a fast sampling rate is required. This work theoretically analyzes the influence of the sampling time and period on the harvested power of sinusoidal EH sources. In addition, the circuit limitations to achieve a fast sampling rate are presented and circuits to deal with them proposed and implemented. Furthermore, one of the circuits is based on a novel pseudo-FOCV method and achieves the fastest sampling rate. Experimental tests are performed with a 2 Hz, 1 V to 3 V sinusoidal source having an output resistance of 127 ¿, and the results are shown to agree with theoretical predictions. It is shown that 1) the harvested power increases with the sampling rate when the sampling time is negligible (sampling 15 times faster than the source frequency extracts around 99 % of the maximum), and 2) for fixed sampling times there is an optimum sampling rate where the harvested power is maximum. The first result is generic and valid for methods other than the FOCV. Tests were also performed with a small-scale wave energy converter placed in a linear shaker emulating a sea environment. Harvested power increases by 25 % with respect using a commercial FOCV unit with a low sampling rate., This work was supported by the project MELOA from the European Commission’s Horizon 2020 research and Innovation program under Grant Agreement No. 776280 and by the Spanish Ministry of Economy and Competitiveness and the European Regional Development Fund under project TEC2016-76991-P. The first author has a grant from the Secretariat of Universities and Research of the Ministry of Business and Knowledge of the Government of Catalonia on the FI program (ref. BDNS 362582)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Nonlinear dynamic analysis of pendulum-type Wave Energy Converter for low-power marine monitoring applications

  • Carandell Widmer, Matias|||0000-0003-0559-4453
  • Toma, Daniel|||0000-0003-0472-1190
  • Alevras, Panagiotis
  • Gasulla Forner, Manuel|||0000-0002-0364-6806
  • Río Fernández, Joaquín del|||0000-0002-6191-2201
  • Barjau Condomines, Ana|||0000-0001-6540-5648
A model for a double pendulum Wave Energy Converter (WEC) for drifter applications has been developed and validated. The WEC is composed by an articulated arm, a gear train, a flywheel, a one-way bearing and a DC generator. Due to the one-way bearing, the system may have 3 or 4 DoF. The corresponding equations of motion have been obtained through the Lagrange formulation. The model has been experimentally validated on a long-stroke shaker by emulating part of a drifter’s motion under wave’s excitation. This motion is in good agreement with the simulation results prior conducted with OrcaFlex package., This work was supported by the project MELOA from the European Commission’s Horizon 2020 research and Innovation program under Grant Agreement No. 776280. The first author has a grant from the Secretariat of Universities and Research of the Ministry of Business and Knowledge of the Government of Catalonia on the FI program (ref. BDNS 362582)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Experimental validation of a fast-tracking FOCV-MPPT circuit for a wave energy converter embedded into an oceanic drifter

  • Carandell Widmer, Matias|||0000-0003-0559-4453
  • Toma, Daniel|||0000-0003-0472-1190
  • Holmes, Andrew S.
  • Río Fernández, Joaquín del|||0000-0002-6191-2201
  • Gasulla Forner, Manuel|||0000-0002-0364-6806
Wave Energy Converters (WECs) are an ideal solution for expanding the autonomy of surface sensor platforms such as oceanic drifters. To extract the maximum amount of energy from these fast-varying sources, a fast maximum power point tracking (MPPT) technique is required. Previous studies have examined power management units (PMU) with fast MPPT circuits, but none of them have demonstrated their feasibility in a real-world scenario. In this study, the performance of a fast-tracking fractional open circuit voltage (FOCV)-MPPT circuit (sampling period TMPPT of 48 ms) is compared with a commercial slow-tracking PMU (TMPPT of 16 s) in a monitored sea area while using a small-scale, pendulum-type WEC. A specific low-power relaxation oscillator circuit is designed to control the fast MPPT circuit. The results demonstrate that by speeding up the sampling frequency of the MPPT circuit, the harvested energy can be increased by a factor of three., The first author was supported by the European Union—NextGenerationEU and the Ministerio de Universidades—Plan de Recuperación, Transformación y Resiliencia under a Margarita Salas post-doctoral research fellowship (ref. 2022UPC-MSC-94068). This work was partially supported by the project MELOA from the European Commission’s Horizon 2020 research and Innovation program under Grant Agreement No. 776280. This study was developed using the framework of the Research Unit Tecnoterra (ICM-CSIC/UPC) and the following project activities: PLOME (PLEC2021-007525; Ministerio de Ciencia e Innovación) and BITER (PID2020-114732RB-C32; Ministerio de Ciencia e Innovación)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Generation WAVY: a new breed of surface drifters for all ocean domains

  • da Silva, António Jorge
  • Sousa, Alexandre
  • Pedrera, Félix
  • Río Fernández, Joaquín del|||0000-0002-6191-2201
  • Pinto, José P.
  • Oliveira, M.
  • Gonçalves, Pedro
  • de Saint Léger, Philippe
  • Chumbinho, Rogério
A new family of multi-purpose, multi-sensor, small sized, easy-to-handle, low-cost, spherical surface drifters is about to appear in the market, with its first three models. The WAVY Ocean is a current, wave and near-surface temperature gradient tracker for the open Ocean; the WAVY Littoral is a current and wave tracker designed for nearshore operations; and the WAVY Basic is a current and nearsurface temperature tracker intended for riverine and estuarine environments, and suitable for citizen science. The WAVY optimized buoyancy - only 30% of the axes above the surface - ensures that their displacement is essentially due to the current, while their small size makes them sensitive to the average vectors in the very near surface. Examples of WAVY Ocean full resolution data from recent observations illustrate the performance and the potential of these drifters in operational missions requiring near-real time data of the very near surface of the ocean., This is a contribution to Project MELOA (Multipurpose/Multi-sensor Extra Light Oceanography Apparatus - H2020-SC5-2017-OneStageB). This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 776825., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Real-time wave monitoring on coastal areas using LPWAN-based embedded systems

  • Carandell Widmer, Matias|||0000-0003-0559-4453
  • Toma, Daniel|||0000-0003-0472-1190
  • Artero Delgado, Carola|||0000-0002-1266-0474
  • Gasulla Forner, Manuel|||0000-0002-0364-6806
  • Río Fernández, Joaquín del|||0000-0002-6191-2201
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., A new embedded system is presented for real-time wave monitoring on coastal areas using SigFox communication. SigFox is a Low-Power Wide-Area Network technology that has been rarely used in coastal marine monitoring. The system is based on the low-power TD1205P module that includes a microcontroller, an accelerometer, a GNSS receiver and a SigFox transceiver. Each hour, the module estimates the wave’s maximum height (Hmax) and mean period (Tz), determines the GPS position, and wirelessly transmits the data through the SigFox network. The procedure for wave parameter estimation is based on the zero-upcrossing method using the vertical acceleration data. It was experimentally validated by attaching the embedded system to a moored buoy and comparing Hmax and Tz with that provided by a seafloor acoustic wave and current profiler, used as a reference. Results over a period of two months show a good match for Hmax but less for Tz, which cross-correlation values at zero lag of about 0.85 and 0.5, respectively. Power tests of the embedded system were also performed resulting in a lifetime estimation of 420 days with a battery pack of 3 Ah., This work was supported by the Spanish Ministry of Economy and Competitiveness and the European Regional Development Fund under project TEC2016-76991-P and by the project MELOA from the European Commission’s Horizon 2020 research and Innovation program under Grant Agreement No. 776280. The first author has a grant from the Secretariat of Universities and Research of the Ministry of Business and Knowledge of the Government of Catalonia on the FI program (ref. BDNS 362582).
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Impact on the wave parameters estimation of a kinetic energy harvester embedded into a drifter

  • Carandell Widmer, Matias|||0000-0003-0559-4453
  • Toma, Daniel|||0000-0003-0472-1190
  • Pinto, José P.
  • Gasulla Forner, Manuel|||0000-0002-0364-6806
  • Río Fernández, Joaquín del|||0000-0002-6191-2201
© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Segon Premi de la Student Poster Competition de l’IEEE Oceans Global Congress, 2020, The effect of a Kinetic Energy Harvester (KEH) on the wave parameters estimation at a WAVY Ocean (WO) drifter is being studied. An algorithm has been developed to calculate the wave parameters from the Inertial Measuring Unit (IMU) embedded on the drifter. Simulations performed by OrcaFlex have been used to refine the algorithm and assess the measurement errors derived from the drifter response. Finally, a WO prototype has been deployed in the controlled environment of CIEM wave flume. Results prove that the KEH has no significant impact on the wave parameter estimation., This work was supported by the project MELOA from the European Commission’s Horizon 2020 research and Innovation program under Grant Agreement No. 776280. The first author has a grant from the Secretariat of Universities and Research of the Ministry of Business and Knowledge of the Government of Catalonia on the FI program (ref. BDNS 362582)., Peer Reviewed, Award-winning
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Contributions to the pendulum-type wave energy converter system for oceanic drifter applications

  • Carandell Widmer, Matias|||0000-0003-0559-4453
  • Toma, Daniel|||0000-0003-0472-1190
  • Gasulla Forner, Manuel|||0000-0002-0364-6806
  • Río Fernández, Joaquín del|||0000-0002-6191-2201
Lagrangian Drifters are autonomous floating passive devices that provide oceanographic surface data. They are low-cost, versatile and easy-deployable marine instrumentation used in climate research. One of the main challenges related to the drifter’s design is the power autonomy. Some studies explore the kinetic oscillatory movement of the waves as an Energy Harvesting (EH) source. At [1] a novel pendulum-type wave energy converter (WEC) system was presented (Fig. 1). The WEC consists of an articulated pendulum arm with a proof mass. This mass moves relatively to the drifter with pendulum motion. Then, through a gear system, rotation is accumulated and increased in a flywheel which drives a dc electrical generator. Then, a first prototype of an oceanic drifter was designed to embed the WEC and was used to perform tests in real sea conditions [2]. The main purpose of this drifter is to measure its own motion and analyze how it translates into energy production. It contains an Inertial Measurement Unit (IMU) for the motion study and a measurement system for the estimation of the WEC power generation. Results from the first sea test show a useful mean power on the order of milliwatts, which can be used as an unlimited backup powering system to recover the unit. An algorithm was developed to estimate wave parameters (height and period) from the IMU embedded on the drifter. Then, the effect of the WEC’s inertia on this estimation was assessed by deploying the drifter in a controlled wave flume. It was concluded that the WEC does not generate significant errors [3]. Finally, several maximum power point tracking (MPPT) techniques for maximizing the WEC harvested energy were evaluated. The designed WEC, together with a power management unit (PMU), was tested on a linear shaker to compare three MPPT techniques, the Constant Voltage versus two variants of the Fractional Open Circuit Voltage (FOCV). Results show a 25% improvement on the scavenged energy with one of the proposed FOCV techniques with respect to the other ones [4]. The purpose of this article is to review the contributions made on WEC systems for lowpower marine environmental monitoring applications., This work was supported by the project MELOA from the European Commission’s Horizon 2020 research and Innovation program under Grant Agreement No. 776280 and by the Spanish Ministry of Economy and Competitiveness and the European Regional Development Fund under project TEC2016-76991-P. The first author has a grant from the Secretariat of Universities and Research of the Ministry of Business and Knowledge of the Government of Catalonia on the FI program (ref. BDNS 362582). The authors extend their thanks to researchers from LIM – UPC for their kind support and yield the facilities of CIEM where the experimental tests were done., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Design and testing of a kinetic energy harvester embedded into an oceanic drifter

  • Carandell Widmer, Matias|||0000-0003-0559-4453
  • Toma, Daniel|||0000-0003-0472-1190
  • Carbonell Ventura, Montserrat|||0000-0002-5425-1767
  • Río Fernández, Joaquín del|||0000-0002-6191-2201
  • Gasulla Forner, Manuel|||0000-0002-0364-6806
© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., A novel Kinetic Energy Harvester (KEH) has been developed for powering oceanic undrogued drifters. It consists on a double pendulum system capable of transforming the wave oscillations into rotation on a flywheel. This rotation is converted into DC current by an electrical generator and further processed by a power management unit (PMU). The PMU includes a “maximum power point tracking” system to maximize energy production by the generator. An oceanic drifter has also been designed to embed the KEH and a custom-made measurement system to perform real sea tests. It counts on an Inertial Measurement Unit to study the motion of the drifter and an embedded measurement system to estimate the rotation speed of the generator and the power at both the input and output of the PMU. A Wi-Fi connection is also included for data transfer at short distances. The generator was firstly characterized at the laboratory; the drifter was then placed on a linear shaker to assess its performance. Finally, the drifter was deployed in a controlled sea area with average values of wave height and frequency of 1.43 m and 0.29 Hz, respectively. In these conditions, the drifter showed horizontal and vertical oscillations with peak-to-peak accelerations of 0.8 g and power spectra centered around 1.5 Hz and 1 Hz, respectively. As a result, the KEH generated a mean output power of 0.18 mW, with peaks of 2.5 mW., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

The new iteration of the wavy drifter (MELOA)

  • Gonçalves, Pedro
  • Marques, Tiago
  • Loureiro, Bruno
  • Borges de Sousa, João
The MELOA (Multi-purpose/Multi-sensor Extra Light Oceanography Apparatus), H2020 project, proposes to develop a low-cost, easy-to-handle, wave resilient, multi-purpose, multi-sensor, extra light surface drifter for use in all water environments, ranging from deep-sea to inland waters, including coastal areas, river plumes and surf zones. The device will be developed as an upgrade to the WAVY drifter (Figure-1) conceived by the LSTS - Faculty of Engineering of the University of Porto, which was used to measure the surface circulation forced by wave breaking, including detailed structure of rifts and the littoral drift current. The new iteration of the wavy drifter improves upon the older one by adding new functionality like wave spectrum computation from collected data, and adding sensors such as a Inertial Measurement Unit (IMU), Atmospheric Pressure Sensor (ATM), a new and improved GNSS modules with new positioning solutions, a new GSM supporting encrypted GPRS connections for real-time data transmission as well as more internal memory. Furthermore a new MCU (Microcontroller Unit) was chosen to integrate all this sensors and data collection and a new firmware package. To adapt to users’ requests and different mission profiles there are five WAVY models available, all with different sensor packages and functionality: Basic and Litoral for coastal operations, Ocean, Ocean ATMO and Ocean Plus for open sea. For the later a Satellite transceiver is used for communication instead of the GSM module, to transmit the results of wave spectrum computation.
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Performance of WAVY ocean Lagrangian drifters for surface characterization of ocean dynamic structures

  • Toma, Daniel|||0000-0003-0472-1190
  • Carandell Widmer, Matias|||0000-0003-0559-4453
  • Río Fernández, Joaquín del|||0000-0002-6191-2201
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Low-cost drifters can measure ocean surface waves thanks to global navigation satellite systems (GNSSs) and new motion-sensor packages. Drifting along or across current gradients allows for unique in-situ wave–current interactions observations. In this paper, we examine the responses of different hull designs in order to determine the best WAVY Ocean casing for detecting wave–current interactions, including wind and short gravitational wave components. The estimated currents, wave parameters and sea surface temperature measured by three different designs of the WAVY Ocean drifters are compared in a wide range of sea state conditions (winds up to 12 m/s and significant wave height up to 2.5 m are accounted)., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Effect of the sampling parameters in FOCV-MPPT circuits for fast-varying EH sources

  • Carandell Widmer, Matias
  • Holmes, Andrew S.
  • Toma, Daniel
  • Río Fernández, Joaquín del
  • Gasulla Forner, Manuel
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The fractional open circuit voltage (FOCV) method is extensively used in low-power energy harvesting (EH) sources to extract maximum power. For fast-varying EH sources a fast sampling rate is required. This work theoretically analyzes the influence of the sampling time and period on the harvested power of sinusoidal EH sources. In addition, the circuit limitations to achieve a fast sampling rate are presented and circuits to deal with them proposed and implemented. Furthermore, one of the circuits is based on a novel pseudo-FOCV method and achieves the fastest sampling rate. Experimental tests are performed with a 2 Hz, 1 V to 3 V sinusoidal source having an output resistance of 127 ¿, and the results are shown to agree with theoretical predictions. It is shown that 1) the harvested power increases with the sampling rate when the sampling time is negligible (sampling 15 times faster than the source frequency extracts around 99 % of the maximum), and 2) for fixed sampling times there is an optimum sampling rate where the harvested power is maximum. The first result is generic and valid for methods other than the FOCV. Tests were also performed with a small-scale wave energy converter placed in a linear shaker emulating a sea environment. Harvested power increases by 25 % with respect using a commercial FOCV unit with a low sampling rate., This work was supported by the project MELOA from the European Commission’s Horizon 2020 research and Innovation program under Grant Agreement No. 776280 and by the Spanish Ministry of Economy and Competitiveness and the European Regional Development Fund under project TEC2016-76991-P. The first author has a grant from the Secretariat of Universities and Research of the Ministry of Business and Knowledge of the Government of Catalonia on the FI program (ref. BDNS 362582)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Impact on the wave parameters estimation of a kinetic energy harvester embedded into a drifter

  • Carandell Widmer, Matias
  • Toma, Daniel
  • Pinto, José P.
  • Gasulla Forner, Manuel
  • Río Fernández, Joaquín del
© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Segon Premi de la Student Poster Competition de l’IEEE Oceans Global Congress, 2020, The effect of a Kinetic Energy Harvester (KEH) on the wave parameters estimation at a WAVY Ocean (WO) drifter is being studied. An algorithm has been developed to calculate the wave parameters from the Inertial Measuring Unit (IMU) embedded on the drifter. Simulations performed by OrcaFlex have been used to refine the algorithm and assess the measurement errors derived from the drifter response. Finally, a WO prototype has been deployed in the controlled environment of CIEM wave flume. Results prove that the KEH has no significant impact on the wave parameter estimation., This work was supported by the project MELOA from the European Commission’s Horizon 2020 research and Innovation program under Grant Agreement No. 776280. The first author has a grant from the Secretariat of Universities and Research of the Ministry of Business and Knowledge of the Government of Catalonia on the FI program (ref. BDNS 362582)., Peer Reviewed, Award-winning, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Nonlinear dynamic analysis of pendulum-type Wave Energy Converter for low-power marine monitoring applications

  • Carandell Widmer, Matias
  • Toma, Daniel
  • Alevras, Panagiotis
  • Gasulla Forner, Manuel
  • Río Fernández, Joaquín del
  • Barjau Condomines, Ana
A model for a double pendulum Wave Energy Converter (WEC) for drifter applications has been developed and validated. The WEC is composed by an articulated arm, a gear train, a flywheel, a one-way bearing and a DC generator. Due to the one-way bearing, the system may have 3 or 4 DoF. The corresponding equations of motion have been obtained through the Lagrange formulation. The model has been experimentally validated on a long-stroke shaker by emulating part of a drifter’s motion under wave’s excitation. This motion is in good agreement with the simulation results prior conducted with OrcaFlex package., This work was supported by the project MELOA from the European Commission’s Horizon 2020 research and Innovation program under Grant Agreement No. 776280. The first author has a grant from the Secretariat of Universities and Research of the Ministry of Business and Knowledge of the Government of Catalonia on the FI program (ref. BDNS 362582)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Real-time wave monitoring on coastal areas using LPWAN-based embedded systems

  • Carandell Widmer, Matias
  • Toma, Daniel
  • Artero Delgado, Carola
  • Gasulla Forner, Manuel
  • Río Fernández, Joaquín del
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., A new embedded system is presented for real-time wave monitoring on coastal areas using SigFox communication. SigFox is a Low-Power Wide-Area Network technology that has been rarely used in coastal marine monitoring. The system is based on the low-power TD1205P module that includes a microcontroller, an accelerometer, a GNSS receiver and a SigFox transceiver. Each hour, the module estimates the wave’s maximum height (Hmax) and mean period (Tz), determines the GPS position, and wirelessly transmits the data through the SigFox network. The procedure for wave parameter estimation is based on the zero-upcrossing method using the vertical acceleration data. It was experimentally validated by attaching the embedded system to a moored buoy and comparing Hmax and Tz with that provided by a seafloor acoustic wave and current profiler, used as a reference. Results over a period of two months show a good match for Hmax but less for Tz, which cross-correlation values at zero lag of about 0.85 and 0.5, respectively. Power tests of the embedded system were also performed resulting in a lifetime estimation of 420 days with a battery pack of 3 Ah., This work was supported by the Spanish Ministry of Economy and Competitiveness and the European Regional Development Fund under project TEC2016-76991-P and by the project MELOA from the European Commission’s Horizon 2020 research and Innovation program under Grant Agreement No. 776280. The first author has a grant from the Secretariat of Universities and Research of the Ministry of Business and Knowledge of the Government of Catalonia on the FI program (ref. BDNS 362582)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Design and testing of a kinetic energy harvester embedded into an oceanic drifter

  • Carandell Widmer, Matias
  • Toma, Daniel
  • Carbonell Ventura, Montserrat
  • Río Fernández, Joaquín del
  • Gasulla Forner, Manuel
© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., A novel Kinetic Energy Harvester (KEH) has been developed for powering oceanic undrogued drifters. It consists on a double pendulum system capable of transforming the wave oscillations into rotation on a flywheel. This rotation is converted into DC current by an electrical generator and further processed by a power management unit (PMU). The PMU includes a “maximum power point tracking” system to maximize energy production by the generator. An oceanic drifter has also been designed to embed the KEH and a custom-made measurement system to perform real sea tests. It counts on an Inertial Measurement Unit to study the motion of the drifter and an embedded measurement system to estimate the rotation speed of the generator and the power at both the input and output of the PMU. A Wi-Fi connection is also included for data transfer at short distances. The generator was firstly characterized at the laboratory; the drifter was then placed on a linear shaker to assess its performance. Finally, the drifter was deployed in a controlled sea area with average values of wave height and frequency of 1.43 m and 0.29 Hz, respectively. In these conditions, the drifter showed horizontal and vertical oscillations with peak-to-peak accelerations of 0.8 g and power spectra centered around 1.5 Hz and 1 Hz, respectively. As a result, the KEH generated a mean output power of 0.18 mW, with peaks of 2.5 mW., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Performance of WAVY ocean Lagrangian drifters for surface characterization of ocean dynamic structures

  • Toma, Daniel
  • Carandell Widmer, Matias
  • Río Fernández, Joaquín del
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Low-cost drifters can measure ocean surface waves thanks to global navigation satellite systems (GNSSs) and new motion-sensor packages. Drifting along or across current gradients allows for unique in-situ wave–current interactions observations. In this paper, we examine the responses of different hull designs in order to determine the best WAVY Ocean casing for detecting wave–current interactions, including wind and short gravitational wave components. The estimated currents, wave parameters and sea surface temperature measured by three different designs of the WAVY Ocean drifters are compared in a wide range of sea state conditions (winds up to 12 m/s and significant wave height up to 2.5 m are accounted)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Contributions to the pendulum-type wave energy converter system for oceanic drifter applications

  • Carandell Widmer, Matias
  • Toma, Daniel
  • Gasulla Forner, Manuel
  • Río Fernández, Joaquín del
Lagrangian Drifters are autonomous floating passive devices that provide oceanographic surface data. They are low-cost, versatile and easy-deployable marine instrumentation used in climate research. One of the main challenges related to the drifter’s design is the power autonomy. Some studies explore the kinetic oscillatory movement of the waves as an Energy Harvesting (EH) source. At [1] a novel pendulum-type wave energy converter (WEC) system was presented (Fig. 1). The WEC consists of an articulated pendulum arm with a proof mass. This mass moves relatively to the drifter with pendulum motion. Then, through a gear system, rotation is accumulated and increased in a flywheel which drives a dc electrical generator. Then, a first prototype of an oceanic drifter was designed to embed the WEC and was used to perform tests in real sea conditions [2]. The main purpose of this drifter is to measure its own motion and analyze how it translates into energy production. It contains an Inertial Measurement Unit (IMU) for the motion study and a measurement system for the estimation of the WEC power generation. Results from the first sea test show a useful mean power on the order of milliwatts, which can be used as an unlimited backup powering system to recover the unit. An algorithm was developed to estimate wave parameters (height and period) from the IMU embedded on the drifter. Then, the effect of the WEC’s inertia on this estimation was assessed by deploying the drifter in a controlled wave flume. It was concluded that the WEC does not generate significant errors [3]. Finally, several maximum power point tracking (MPPT) techniques for maximizing the WEC harvested energy were evaluated. The designed WEC, together with a power management unit (PMU), was tested on a linear shaker to compare three MPPT techniques, the Constant Voltage versus two variants of the Fractional Open Circuit Voltage (FOCV). Results show a 25% improvement on the scavenged energy with one of the proposed FOCV techniques with respect to the other ones [4]. The purpose of this article is to review the contributions made on WEC systems for lowpower marine environmental monitoring applications., This work was supported by the project MELOA from the European Commission’s Horizon 2020 research and Innovation program under Grant Agreement No. 776280 and by the Spanish Ministry of Economy and Competitiveness and the European Regional Development Fund under project TEC2016-76991-P. The first author has a grant from the Secretariat of Universities and Research of the Ministry of Business and Knowledge of the Government of Catalonia on the FI program (ref. BDNS 362582). The authors extend their thanks to researchers from LIM – UPC for their kind support and yield the facilities of CIEM where the experimental tests were done., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Experimental validation of a fast-tracking FOCV-MPPT circuit for a wave energy converter embedded into an oceanic drifter

  • Carandell Widmer, Matias
  • Toma, Daniel
  • Holmes, Andrew S.
  • Río Fernández, Joaquín del
  • Gasulla Forner, Manuel
Wave Energy Converters (WECs) are an ideal solution for expanding the autonomy of surface sensor platforms such as oceanic drifters. To extract the maximum amount of energy from these fast-varying sources, a fast maximum power point tracking (MPPT) technique is required. Previous studies have examined power management units (PMU) with fast MPPT circuits, but none of them have demonstrated their feasibility in a real-world scenario. In this study, the performance of a fast-tracking fractional open circuit voltage (FOCV)-MPPT circuit (sampling period TMPPT of 48 ms) is compared with a commercial slow-tracking PMU (TMPPT of 16 s) in a monitored sea area while using a small-scale, pendulum-type WEC. A specific low-power relaxation oscillator circuit is designed to control the fast MPPT circuit. The results demonstrate that by speeding up the sampling frequency of the MPPT circuit, the harvested energy can be increased by a factor of three., The first author was supported by the European Union—NextGenerationEU and the Ministerio de Universidades—Plan de Recuperación, Transformación y Resiliencia under a Margarita Salas post-doctoral research fellowship (ref. 2022UPC-MSC-94068). This work was partially supported by the project MELOA from the European Commission’s Horizon 2020 research and Innovation program under Grant Agreement No. 776280. This study was developed using the framework of the Research Unit Tecnoterra (ICM-CSIC/UPC) and the following project activities: PLOME (PLEC2021-007525; Ministerio de Ciencia e Innovación) and BITER (PID2020-114732RB-C32; Ministerio de Ciencia e Innovación)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Optimum MPPT strategy for low-power pendulum-type wave energy converters

  • Carandell Widmer, Matias
  • Toma, Daniel
  • Río Fernández, Joaquín del
  • Gasulla Forner, Manuel
© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Maximum Power Point Tracking (MPPT) techniques for low-power pendulum-type Wave Energy Converters were evaluated. A Kinetic Energy Harvester previously designed, together with a Power Management Unit, were tested on a linear shaker to compare three MPPT techniques, the Constant Voltage versus two variants of the Fractional Open Circuit Voltage (FOCV). Results show a 25% improvement on the scavenged energy with one of the proposed FOCV techniques with respect to the other ones., This work was supported by the project MELOA from the European Commission’s Horizon 2020 research and Innovation program under Grant Agreement No. 776825 and by the Spanish Ministry of Economy and Competitiveness and the European Regional Development Fund under project TEC2016-76991-P. The first author has a grant from the Secretariat of Universities and Research of the Ministry of Business and Knowledge of the Government of Catalonia on the FI program (ref. BDNS 362582)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Generation WAVY: a new breed of surface drifters for all ocean domains

  • da Silva, António Jorge
  • Sousa, Alexandre
  • Pedrera, Félix
  • Río Fernández, Joaquín del
  • Pinto, José P.
  • Oliveira, M.
  • Gonçalves, Pedro
  • de Saint Léger, Philippe
  • Chumbinho, Rogério
A new family of multi-purpose, multi-sensor, small sized, easy-to-handle, low-cost, spherical surface drifters is about to appear in the market, with its first three models. The WAVY Ocean is a current, wave and near-surface temperature gradient tracker for the open Ocean; the WAVY Littoral is a current and wave tracker designed for nearshore operations; and the WAVY Basic is a current and nearsurface temperature tracker intended for riverine and estuarine environments, and suitable for citizen science. The WAVY optimized buoyancy - only 30% of the axes above the surface - ensures that their displacement is essentially due to the current, while their small size makes them sensitive to the average vectors in the very near surface. Examples of WAVY Ocean full resolution data from recent observations illustrate the performance and the potential of these drifters in operational missions requiring near-real time data of the very near surface of the ocean., This is a contribution to Project MELOA (Multipurpose/Multi-sensor Extra Light Oceanography Apparatus - H2020-SC5-2017-OneStageB). This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 776825., Peer Reviewed, Postprint (published version)