Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Optical characterization of lead-free Cs2SnI6 double Perovskite Fabricated from degraded and reconstructed CsSnI3 films

  • López Fraguas, Eduardo
  • Dasi, Sofía
  • Mora Sero, Iván
Halide perovskites have experienced a huge development in the past years, but they still have two major challenges for their massive implantation: the long-term stability and the use of lead. One of the most obvious lead-free candidates to replace these perovskites is CsSnI3, but due to its poor environmental stability, it has been discarded for the fabrication of stable devices. Nevertheless, ambient degradation of CsSnI3 and ulterior reconstruction produce a relatively stable lead-free Cs2SnI6 double perovskite with interesting optical properties that have not been deeply characterized previously. In this work, the potential use for the optical properties of Cs2SnI6 is studied and compared with that of the most common halide perovskite, CH3NH3PbI3 (MAPbI3). The Cs2SnI6 films stayed in a standard atmosphere for a week without showing any signs of degradation. They also demonstrated better reflective behavior than MAPbI3 and higher absorption in the 650 and 730 nm spectral range, making this material interesting for the development of photodetectors in this region. This study demonstrates that Cs2SnI6 is a promising material for photodevices, as it highlights its main characteristics and optical parameters, giving an original view on the use of the double perovskite, but at the same time emphasizing the need to improve the electrical properties for the development of efficient optoelectronic devices., E.L.-F. wants to express his gratitude to the Ministerio de Educación y Formación Profesional for his doctoral grant (FPU research fellowship FPU17/00612) and his research stay grant (EST18/00399). This work was partially supported by the European Research Council (ERC) via Consolidator Grant (724424-No-LIMIT) and the European Commission via FET Open Grant (862656 - DROP-IT). We acknowledge SCIC from Jaume I University (UJI) for help with XRD and SEM-EDS characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Chemically driven dimensionality modulation of hybrid tin(ii) halide perovskite microcrystals

  • Sánchez-Alarcón, Raul I.
  • Solis, Omar E.
  • Momblona-Rincon, Maria Cristina
  • Ripolles, Teresa S.
  • Martínez-Pastor, Juan P.
  • Abargues, Rafael
  • Boix, Pablo P.|||0000-0001-9518-7549
[EN] The lattice arrangement of lead-free perovskites can be altered by synthesis parameters such as concentration, temperature, choice of solvents, and the length of monovalent cations. This effect, often described as dimensionality modulation, can be exploited to develop new materials with better optical properties than their three-dimensional counterpart. This work explores the versatility of the hot-injection synthesis for obtaining 2-thiopheneethylammonium (TEA(+)) based tin halide perovskite microcrystals. The dimensionality of TEA-based tin bromide perovskite microcrystals can be modulated through changes in the TEA concentration, giving rise to the formation of highly luminescent 0D-TEA(4)SnBr(6) and low-emissive 2D-TEA(2)SnBr(4) microplates. In contrast, 0D-[TEASnCl(3)][TEACl] and 2D-TEA(2)SnI(4) are thermodynamically preferred as main products when using the chloride and iodide analogues, respectively, limiting the dimensional versatility. It is noteworthy that 0D-TEA(4)SnBr(6) shows the highest PLQY from the low dimensional TEA tin halide family (PLQY = 75% in thin-film) owing to a more confined configuration based on isolated [SnBr6](4-) octahedra moieties separated by TEA(+) cations, being attractive for optoelectronic applications., This project has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No. 862656 (project DROP-IT) by the Spanish MICINN through project no. PID2020-120484RB. We acknowledge the support from the Spanish MINECO through the project Nirvana (no. PID2020-119628RB-C31) by MCIN/AEI/10.13039/501100011033. Also, we acknowledge the financial support from Generalitat Valenciana through the CIDEGENT contract (ref: CIDEGENT/2021/044) and CIAPOS 2022/018 grant. The work was partially funded by MCIN/AEI through project TED2021-131600B-C32.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Ecofriendly Perovskites with Giant Self-Defocusing Optical Response

  • Suárez, Isaac
  • Martinez-Pastor, Juan P.
  • Oszajca, Marek F.
  • Lüchinger, Norman A.
  • Graves, Brian
  • Agouram, Said
  • Ferrando, Albert
  • Milián Enrique, Carles|||0000-0001-8492-366X
[EN] The full optical control of light using sustainable green technologies is one of the incipient challenges of the Photonics community. There are, however, few optical materials able to provide a significant nonlinear refractive index change under small enough intensities (< 1 GW cm(-2)), and, more importantly, allowing the external control of the magnitude and sign of their nonlinear response. This manuscript demonstrates that Cs2SnI6 lead-free nanocrystals (NCs) present an extraordinary self-defocusing response not yet observed up to now in any material. Despite its complex structural form, these NCs are fully characterized here, both experimentally and theoretically, revealing a giant negative refractive change Delta n = -0.05 under proper illumination conditions. The nonlinear response is tuned with the intensity, concentration of NCs in the solvent, and propagation distance leading to a crossover where the media transforms to self-focusing with Delta n = +0.002. These results can provide fascinating opportunities in sensing and light-matter interactions for a future ecofriendly photonic technology., This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement no. 862656 (project DROP-IT) and by the Spanish MICINN through project no. PID2020-120484RB-I00 and by Generalitat Valenciana PROMETEO/2021/082.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

High Quality Inkjet Printed‐Emissive Nanocrystalline Perovskite CsPbBr3 Layers for Color Conversion Layer and LEDs Applications

  • Vescio, Giovanni
  • Frieiro Castro, Juan Luis
  • Gualdrón‐Reyes, Andrés F.
  • Hernández Márquez, Sergi
  • Mora‐Seró, Ivan
  • Garrido Fernández, Blas
  • Cirera Hernández, Albert
Metal halide perovskites (MHPs) have shown outstanding optical emissive properties and can be employed in several optoelectronics devices. In contrast with materials of well-established technologies, which are prone to degradation or require expensive processes, MHPs can be obtained by solution processing methods and increase stability. Inkjet printing is proposed as an industrial friendly technique to deposit MHPs. The inks have been developed from colloidal CsPbBr3 nanocrystals and printing procedures that allow the deposition of thin layers with intense green emission. High emissive printed layers are assured by carrying out thermal annealing in vacuum oven, which is demonstrated to promote compact layers with low roughness, corroborated by SEM and AFM. XRD measurements show CsPbBr3 crystalline layers with cubic symmetry and XPS provides insight into the stoichiometric composition and local bonding. Optical properties of inkjet-printed CsPbBr3 films have been analyzed by UV-vis absorbance and photoluminescence (PL), to extract the bandgap energy and photoluminescence quantum yield (PLQY). CsPbBr3 printed layers emit at 524 nm with a narrow emission (FWHM ≈ 15 nm), exhibiting a PLQY up to 20%. These results enabled the large-scale fabrication by inkjet printing of CsPbBr3 color conversion layers (CCLs) and pave the way for flexible LEDs.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Exploiting the Lability of Metal Halide Perovskites for Doping Semiconductor Nanocomposites

  • Calcabrini, Mariano
  • Calcabrini, Mariano
  • Genç, Aziz
  • Genç, Aziz
  • Liu, Yu
  • Liu, Yu
  • Kleinhanns, Tobias
  • Kleinhanns, Tobias
  • Lee, Seung-Ho
  • Dirin, Dmitry N.
  • Akkerman, Quinten A.
  • Kovalenko, Maksym V.
  • Arbiol, Jordi
  • Ibáñez, María
Cesium lead halides have intrinsically unstable crystal lattices and easily transform within perovskite and nonperovskite structures. In this work, we explore the conversion of the perovskite CsPbBr3 into Cs4PbBr6 in the presence of PbS at 450 °C to produce doped nanocrystal-based composites with embedded Cs4PbBr6 nanoprecipitates. We show that PbBr2 is extracted from CsPbBr3 and diffuses into the PbS lattice with a consequent increase in the concentration of free charge carriers. This new doping strategy enables the adjustment of the density of charge carriers between 1019 and 1020 cm-3, and it may serve as a general strategy for doping other nanocrystal-based semiconductors., M.C. has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Grant Agreement No. 665385. ICN2 acknowledges funding from Generalitat de Catalunya 2017 SGR 327. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 823717 – ESTEEM3. M.V.K. acknowledges the support by the European Research Council under the Horizon 2020 Framework Program (ERC Consolidator Grant SCALE-HALO Grant Agreement No. 819740) and by FET-OPEN project no. 862656 (DROP-IT).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Chemically driven dimensionality modulation of hybrid tin(ii) halide perovskite microcrystals

  • Sánchez-Alarcón, Raúl I.
  • Solis, Omar E.
  • Momblona-Rincon, María Cristina
  • Ripolles,Teresa S.
  • Martínez-Pastor, Juan P.
  • Abargues, Rafael
  • Boix, Pablo P.
The lattice arrangement of lead-free perovskites can be altered by synthesis parameters such as concentration, temperature, choice of solvents, and the length of monovalent cations. This effect, often described as dimensionality modulation, can be exploited to develop new materials with better optical properties than their three-dimensional counterpart. This work explores the versatility of the hot-injection synthesis for obtaining 2-thiopheneethylammonium (TEA) based tin halide perovskite microcrystals. The dimensionality of TEA-based tin bromide perovskite microcrystals can be modulated through changes in the TEA concentration, giving rise to the formation of highly luminescent 0D-TEASnBr and low-emissive 2D-TEASnBr microplates. In contrast, 0D-[TEASnCl][TEACl] and 2D-TEASnI are thermodynamically preferred as main products when using the chloride and iodide analogues, respectively, limiting the dimensional versatility. It is noteworthy that 0D-TEASnBr shows the highest PLQY from the low dimensional TEA tin halide family (PLQY = 75% in thin-film) owing to a more confined configuration based on isolated [SnBr] octahedra moieties separated by TEA cations, being attractive for optoelectronic applications., This project has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No. 862656 (project DROP-IT) by the Spanish MICINN through project no. PID2020-120484RB. We acknowledge the support from the Spanish MINECO through the project Nirvana (no. PID2020-119628RB-C31) by MCIN/AEI/10.13039/501100011033. Also, we acknowledge the financial support from Generalitat Valenciana through the CIDEGENT contract (ref: CIDEGENT/2021/044) and CIAPOS 2022/018 grant. The work was partially funded by MCIN/AEI through project TED2021-131600B-C32.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

High Quality Inkjet Printed‐Emissive Nanocrystalline Perovskite CsPbBr3 Layers for Color Conversion Layer and LEDs Applications

  • Vescio, Giovanni
  • Frieiro Castro, Juan Luis
  • Gualdrón‐Reyes, Andrés F.
  • Hernández Márquez, Sergi
  • Mora‐Seró, Ivan
  • Garrido Fernández, Blas
  • Cirera Hernández, Albert
Metal halide perovskites (MHPs) have shown outstanding optical emissive properties and can be employed in several optoelectronics devices. In contrast with materials of well-established technologies, which are prone to degradation or require expensive processes, MHPs can be obtained by solution processing methods and increase stability. Inkjet printing is proposed as an industrial friendly technique to deposit MHPs. The inks have been developed from colloidal CsPbBr3 nanocrystals and printing procedures that allow the deposition of thin layers with intense green emission. High emissive printed layers are assured by carrying out thermal annealing in vacuum oven, which is demonstrated to promote compact layers with low roughness, corroborated by SEM and AFM. XRD measurements show CsPbBr3 crystalline layers with cubic symmetry and XPS provides insight into the stoichiometric composition and local bonding. Optical properties of inkjet-printed CsPbBr3 films have been analyzed by UV-vis absorbance and photoluminescence (PL), to extract the bandgap energy and photoluminescence quantum yield (PLQY). CsPbBr3 printed layers emit at 524 nm with a narrow emission (FWHM ≈ 15 nm), exhibiting a PLQY up to 20%. These results enabled the large-scale fabrication by inkjet printing of CsPbBr3 color conversion layers (CCLs) and pave the way for flexible LEDs.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Exploiting the lability of metal halide perovskites for doping semiconductor nanocomposites

  • Calcabrini, Mariano|||0000-0003-4566-5877
  • Genç, Aziz|||0000-0002-2888-2549
  • Liu, Yu|||0000-0001-7313-6740
  • Kleinhanns, Tobias
  • Lee, Seungho|||0000-0002-6962-8598
  • Dirin, Dmitry N.|||0000-0002-5187-4555
  • Akkerman, Quinten A.
  • Kovalenko, Maksym V.|||0000-0002-6396-8938
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Ibáñez, Maria|||0000-0001-5013-2843
Cesium lead halides have intrinsically unstable crystal lattices and easily transform within perovskite and nonperovskite structures. In this work, we explore the conversion of the perovskite CsPbBr into CsPbBr in the presence of PbS at 450 °C to produce doped nanocrystal-based composites with embedded CsPbBr nanoprecipitates. We show that PbBr is extracted from CsPbBr and diffuses into the PbS lattice with a consequent increase in the concentration of free charge carriers. This new doping strategy enables the adjustment of the density of charge carriers between 10 19 and 10 20 cm -3, and it may serve as a general strategy for doping other nanocrystal-based semiconductors.
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Lead‐free halide perovskite materials and optoelectronic devices: progress and prospective

  • López Fernández, Iago
  • Valli, Donato
  • Wang, Chun‐Yun
  • Samanta, Subarna
  • Okamoto, Takuya
  • Huang, Yi‐Teng
  • Sun, Kun
  • Liu , Yang
  • Chirvony, Vladimir S.
  • Patra, Avijit
  • Zito, Juliette
  • De Trizio, Luca
  • Gaur , Deepika
  • Sun, Hong‐Tao
  • Xia, Zhiguo
  • Li, Xiaoming
  • Zeng, Haibo
  • Mora‐Seró, Iván
  • Pradhan, Narayan
  • Martínez‐Pastor, Juan P.
  • Müller‐Buschbaum, Peter
  • Biju, Vasudevanpillai
  • Debnath, Tushar
  • Saliba, Michael
  • Debroye, Elke
  • Hoye, Robert L. Z.
  • Infante, Ivan
  • Manna, Liberato
  • Polavarapu , Lakshminarayana
Halide perovskites, in the form of thin films and colloidal nanocrystals, have recently taken semiconductor optoelectronics research by storm, and have emerged as promising candidates for high‐performance solar cells, light‐emitting diodes (LEDs), lasers, photodetectors, and radiation detectors. The impressive optical and optoelectronic properties, along with the rapid increase in efficiencies of solar cells and LEDs, have greatly attracted researchers across many disciplines. However, most advances made so far in terms of preparation (colloidal nanocrystals and thin films), and the devices with highest efficiencies are based on Pb‐based halide perovskites, which have raised concerns over their commercialization due to the toxicity of Pb. This has triggered the search for lower‐toxicity Pb‐free halide perovskites and has led to significant progress in the last few years. In this roadmap review, researchers of different expertise have joined together to summarize the latest progress, outstanding challenges, and future directions of Pb‐free halide perovskite thin films and nanocrystals, regarding their synthesis, optical spectroscopy, and optoelectronic devices, to guide the researchers currently working in this area as well as those that will join the field in the future., Agencia Estatal de Investigación | Ref. RYC2018-026103-I, Agencia Estatal de Investigación | Ref. PID2020-117371RA-I00, Agencia Estatal de Investigación | Ref. TED2021-131628A-I00, Xunta de Galicia | Ref. ED431F2021/05, Agencia Estatal de Investigación | Ref. TED2021-131600B-C31, Generalitat Valenciana | Ref. MFA/2022/020, Universidade de Vigo/CISUG