Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Experimental characterization data on aggregates from construction and demolition wastes for the assistance in sorting and recycling practices

  • Marín Cortés, Sonia
  • Fernández-Álvarez, María
  • Enríquez Pérez, Esther
  • Fernández Lozano, José Francisco
12 pags., 4 figs., 5 tabs., Nowadays, the circular economy of construction materials is a challenge that can offer great benefits in environmental, social and economic aspects. This work provides a set of practical data and interpretations for eleven common inorganic building materials as well as basis for their adequate characterization for the purpose of their valuation as secondary raw materials. The studied materials were divided in three main groups: ceramic (i.e., solid and hollow red bricks, porcelain and extruded stoneware tiles, red and white wall tiles and sanitary ware), gypsum-based (i. e., plaster and plasterboard) and cement-based (i.e., mortar and concrete) materials. This work pursues to stablish the main differences between inorganic construction materials to provide a reliable, complete, and convenient information to be used in scientific or industrial appliances, compiling valuable information, with special emphasis on spectroscopic characterization. In addition, Raman spectroscopy allows an advantageous characterization, successfully demonstrating the identification through chemometric models of ternary mixtures of construction materials. One target application for this analysis is the classification and separation of demolition waste materials for their further recycling, contributing this way to the circular economy and thus, the sustainable development of the society., The authors gratefully acknowledge the financial support of the European Union’s Horizon 2020 research and innovation programmes ICEBERG (No. 869336) and CHARISMA grant (No. 952921) for their financial support. María Fernandez- ´ Alvarez ´ acknowledges the financial support from MCIN/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR (Grant No FJC2021-047888-I)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Promoting the circularity of ceramic materials through cold sintering of aggregates from construction and demolition waste

  • Marín Cortés, Sonia
  • Biesuz, Mattia
  • Serrano, Aida
  • De Bona, Emanuele
  • Enríquez Pérez, Esther
  • Fernández Lozano, José Francisco
  • Sglavo, Vincenzo M.
10 pags., 6 figs., A ceramic composition containing 95 wt% of construction and demolition waste-like material was consolidated by cold sintering process at 200 °C using KOH water solutions as the liquid medium. The relative density of the samples reaches ∼90 % of the theoretical one for process conditions of 600 MPa and 60 min. A post-annealing process at 1100 °C of the as-cold sintered samples causes a slight increase in the relative density and of their mechanical strength compared with conventionally sintered samples at 1100 °C and increases the shape factor of the Weibull distribution, thus increasing the reliability of the component. It is shown that cold sintering of the material avoids its high pyroplasticity, providing low shrinkage and reducing internal defects in the ceramic. This work represents the first exploration of the viability of manufacturing ceramic tiles with high recycled content contributing to the transition to a greener world., The authors gratefully acknowledge the financial support of the European Union's Horizon 2020 research and innovation programs ICEBERG (No. 869336) for their financial support. This work was supported by the project PID2020-114192RB-C41 funded by MCIN/AEI/10.13039/501100011033 and by ‘‘ERDF A way of making Europe’‘. The authors are grateful to the JECS Trust for funding the visit of S. M-C. to the Department of Industrial Engineering, University of Trento, Italy (Contract No. 2022336). A.S. acknowledges financial support from PID2021-124585NB-C33 funded by MCIN/AEI/10.13039/501100011033 and by ‘‘ERDF A way of making Europe’‘, by Project TED2021-130957B-C51 funded by MCIN/AEI/10.13039/501100011033 and by the ‘‘European Union NextGenerationEU/PRTR’’ and from grant RYC2021-031236-I funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dense ceramics by cold reaction sintering using 95 % powdered construction and demolition waste and sodium silicate

  • Marín Cortés, Sonia
  • Serrano, Aida
  • Enríquez Pérez, Esther
  • Fernández Lozano, José Francisco
10 pags. 7 figs., 2 tabs., This work explores the feasibility of producing ceramic-like materials from recycled construction and demolition waste through cold reaction sintering using sodium silicate as the liquid medium. The recycled material consists of a mixture of ceramics, mortar, and/or plasterboard - common building materials. Samples containing 95 wt% of recycled content were successfully fabricated at 150 ºC, a considerably lower temperature compared to conventional ceramic processes. These samples exhibited dense microstructures with relative densities of ∼ 90 %, as well as promising mechanical properties, including Vickers hardness values comparable to conventional bricks. In particular, samples with 30 % non-ceramic material showed more than twice the hardness when mortar was incorporated. Leaching tests confirmed the chemical stability of the material, with the incorporation of Ca²⁺ ions into non-leachable species, suggesting a reaction during CRS that enhances its durability. Additionally, FTIR analysis showed a blueshift in the signature from 973 cm⁻¹ to 1041 cm⁻¹ under more aggressive conditions, indicating structural changes and improved leachability. The primary advantage of this process would lie in the high recycled content used to create materials. This proposed new method allows obtaining dense pieces at very low temperatures, which also supposes a reduction of energy consumption, and therefore, an improvement of the sustainability of the production process. Given that this construction and demolition waste are often limited to not high added values, this approach not only supports environmental sustainability and resource conservation but also offers a viable pathway to decarbonizing the ceramic industry., The authors gratefully acknowledge the financial support of the European Union’s Horizon 2020 research and innovation programs ICEBERG (No. 869336) for their financial support. This work was supported by the Spanish Ministry for Science and Innovation (MCIN) under the project PID2020–114192RB-C41 and PID2021–124585NB-C33 funded by MCIN/AEI/10.13039/501100011033 and by ‘‘ERDF A way of making Europe’’ and by Project T130957B-C51ED2021– funded by MCIN/AEI/10.13039/501100011033 and by the ‘‘European Union NextGenerationEU/PRTR’’. A.S. acknowledges financial support from grant RYC2021–031236-I funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Cold sintering of complex-shaped ceramic materials

  • Marín Cortés, Sonia
  • Biesuz, Mattia
  • Bhandari, Subhadip
  • Franchin, Giorgia
  • Enríquez Pérez, Esther
  • Fernández Lozano, José Francisco
  • Sglavo, Vincenzo M.
7 pages, 4 figures, 2 tables, The present work explores for the first time the production of ceramic bodies with complex shape through the cold sintering process. Inspired by previous works on spark plasma sintering, a spacer accessory was designed to act as a removable mold. This proof-of-concept was tested with four different ceramic systems: biogenic hydroxyapatite, zinc oxide, diatomaceous earth and construction/demolition waste materials. In all cases, the density is comparable to that obtained by cold sintering of simpler disks. Moreover, the microstructure of the complex-shaped materials is substantially homogeneous in the entire component. Some distortions can be detected when comparing the spacer and sample shape, their control and modeling being a key challenge for future works., The authors gratefully acknowledge the financial support of the European Union’s Horizon 2020 Research and Innovation Programs ICEBERG (No. 869336) for their financial support. Subhadip Bhandari gratefully acknowledges the CARIPARO Foundation, Padova, Italy, for his Ph.D. scholarship. This work was supported by the Spanish Ministry for Science and Innovation (MCIN) under the project PID2020114192RB-C41. UNITN is also acknowledged for the financial support and the used facilities., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

(Ca,Sr)(K,Na)AlSi3O8:Eu3+ photoluminescent pigment for traceability applications in ceramics

  • Marín Cortés, Sonia
  • Fuertes, Víctor
  • Serrano Rubio, Aída
  • López-Sánchez, Jesús
  • Fernández-Álvarez, María
  • Román-Sánchez, Sara
  • París Ogáyar, Marina
  • Muñoz, David
  • Cabrera, María José
  • Fernández Lozano, José Francisco
  • Enríquez Pérez, Esther
Within the circular economy framework, developing technologies that ensure product traceability have gained increasing relevance. However, there is no traceability solution applicable to ceramic tiles, due to the high temperature used during their processing. The proposed solution is a photoluminescent (PL) ceramic pigment with (Ca,Sr)(K,Na)AlSi3O8:Eu3+ crystallizations, compatible with conventional glazes. The designed material was applied by inkjet printing on the surface of a ceramic tile and the aesthetics of the product were preserved since it remained invisible unless ultraviolet light was used. This study investigated the compositional design, processing, and photoluminescence response of the PL ceramic pigment. Finally, the tool was industrially demonstrated by fabricating a suitable ink from the PL ceramic pigment and depositing it in a ceramic tile by inkjet printing. This study opens new avenues in ceramic industry, since these findings may be applied to other ceramic pigments for the fabrication of traceability tools for ceramic tiles., The authors gratefully acknowledge the financial support of the following projects: European Union’s Horizon 2020 Research and Innovation Program ICEBERG (No. 869336), AFICHES from CSIC (PIE 20460E101) and Fri2 Project from CDTI (IDI-20240233). V. F. acknowledges financial support from Comunidad de Madrid under the project 2024-T1/TEC-31320 granted by “Ayudas a la atracción de talento investigador César Nombela 2024”. A. S. acknowledges financial support from grant RYC2021-031236-I funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. J. L.-S. acknowledges the financial support from PID2023–151036OA-I00 funded by MICIU/AEI/ 10.13039/501100011033 and by the European Union, and from grant RYC2022-035912-I funded by MCIU/AEI/10.13039/501100011033 and by the European Social Fund Plus (ESF+). M. F-A. acknowledges the financial support from MCIN/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR (Grant No FJC2021-047888-I). M. P. O. acknowledges the financial support from MICINN for an FPU (FPU20/03166). We acknowledge the European Synchrotron Radiation Facility (ESRF) for the provision of synchrotron radiation facilities under proposal number MA-5602. Parts of these experiments were performed at the BL22-CLÆSS beamline of the ALBA synchrotron through an experiment with the reference number 2022025654. The authors are grateful to the BM25-SpLine and BL22-CLÆSS staff for their support in the provision of synchrotron radiation facilities., Peer reviewed