Skip to main content

FENOMENOS DE CALENTAMIENTO LOCAL INDUCIDOS POR NANOESTRUCTURAS PLASMONICAS Y MAGNETICAS SOBRE MATERIALES CON RTANSICION DE FASE

PID2020-114192RB-C41

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2020
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 34
Encontrada(s) 1 página(s)

Docta Complutense
Publication Artículo científico (JournalArticle)

Generation of defective few-layered graphene mesostructures by high-energy ball milling and their combination with FeSiCuNbB microwires for reinforcing microwave absorbing properties

  • López Sánchez, Jesús
  • Peña Moreno, Álvaro
  • Serrano, Aída
  • Del Campo, Adolfo
  • Rodríguez De La Fuente, Óscar
  • Carmona Tejero, Noemí
  • Matatagui Cruz, Daniel
  • Horrillo, María del Carmen
  • Rubio Zazo, Juan
  • Navarro Palma, Elena
  • Marín Palacios, María Pilar
Defective few-layered graphene mesostructures (DFLGMs) are produced from graphite flakes by high-energy milling processes. We obtain an accurate control of the generated mesostructures, as well as of the amount and classification of the structural defects formed, providing a functional material for microwave absorption purposes. Working under far-field conditions, competitive values of minimum reflection loss coefficient (RL_(min)) = −21.76 dB and EAB = 4.77 dB are achieved when DFLGMs are immersed in paints at a low volume fraction (1.95%). One step forward is developed by combining them with the excellent absorption behavior that offers amorphous Fe_(73.5)Si_(13.5)B_(9)Cu_(1)Nb microwires (MWs), varying their filling contents, which are below 3%. We obtain a RLmin improvement of 47% (−53.08 dB) and an EAB enhancement of 137% (4 dB) compared to those obtained by MW-based paints. Furthermore, a f_(min) tunability is demonstrated, maintaining similar RL_(min) and EAB values, irrespective of an ideal matching thickness. In this scenario, the Maxwell-Garnet standard model is valid, and dielectric losses mainly come from multiple reflections, interfacial and dielectric polarizations, which greatly boost the microwave attenuation of MWs. The present concept can remarkably enhance not only the MW attenuation but can also apply to other microwave absorption architectures of technological interest by adding low quantities of DFLGMs.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Detecting Magnetic Permeability and Electrical Conductivity Fluctuations in Metallic Ferromagnetic Sheets through the Shielding Effect

  • Hernando, Antonio
  • Giacomone, Fernando
  • Viñolas, Jordi
  • García García-Tuñón, Miguel Ángel
  • Gálvez, Fernando
  • Castellanos, Alberto
  • Hoyos, Alfonso de
  • Cerracín, Andrés
[EN] In this report, a method is proposed for determining the fluctuations of physical and structural properties in metallic ferromagnetic samples by magnetic scanning. The method is based on the shielding of a circular loop electromagnetic field source using a ferromagnetic and metallic sheet. The shielding of the electromagnetic field depends on the field frequency and amplitude as well as the electrical conductivity and magnetic permeability of the sheet. The proposed method does not require winding around the sheet. The experimental AC shielding results are reported., This work was supported by the Spanish Ministerio de Ciencia, Innovación y Universidades through Research Project PID2020-114192RB-C41.F. Giacomone acknowledges grants PTA2015-10497-I and PTA2019-017584-I from Ministerio de Ciencia, Innovación y Universidades.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Evaluation of Low-Toxic Hybrid Sol-Gel Coatings with Organic pH-Sensitive Inhibitors for Corrosion Protection of AA2024 Aluminium Alloy

  • Jaldo Serrano, Eva
  • López-Sánchez, Jesús
  • García Galván, Federico
  • Serrano Rubio, Aída
  • Rodríguez de la Fuente, Óscar
  • Barranco, Violeta
  • Galván Sierra, Juan Carlos
  • Carmona, N.
Today’s environmental needs require the reduction of the weight of vehicles, thus reducing fuel consumption and associated emissions. For this reason, the use of light alloys is being studied, which, due to their reactivity, must be protected before use. In this work, the effectiveness of a hybrid sol-gel coating doped with various organic environmentally friendly corrosion inhibitors applied to an AA2024 lightweight aluminium alloy is evaluated. Some of the inhibitors tested are pH indicators, acting as both corrosion inhibitors and optical sensors for the surface of the alloy. Samples are subjected to a corrosion test in a simulated saline environment and characterised before and after the test. The experimental results regarding their best inhibitor performance for their potential application in the transport industry are evaluated., This research was funded by the Spanish Ministry of Science and Innovation (MICINN) for financing the projects RTI2018-095856-B-C21; and by the Spanish Ministry of Economic Affairs and Digital Transformation (MINECO) through the projects PID2020-114192RB-C41, PID2019-104717RB-I00 and PID2021-122980OB-C51. A.S. acknowledges the financial support from MCIN for a “Ramón y Cajal” contract RYC2021-031236-I., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

CoSb3-based skutterudite nanocomposites prepared by cold sintering process with enhanced thermoelectric properties

  • Serrano Rubio, Aída
  • Caballero-Calero, Olga
  • Granados-Miralles, Cecilia
  • Gorni, Giulio
  • Manzano, Cristina V.
  • Rull Bravo, Marta
  • Moure Arroyo, Alberto
  • Martín-González, Marisol
  • Fernández Lozano, José Francisco
[EN] We show here for the first time the use of a cold sintering process (CSP) to sinter CoSb-based thermoelectric materials. CSP at 150 °C for 90 min under a uniaxial pressure of 750 MPa yields pieces with a relative density of 86 %, which is increased to around 92 % after a post-annealing at temperatures ≥ 500 °C in Ar atmosphere. The reported CSP produces Te doped-CoSb nanocomposites with similar morphological and structural characteristics to the starting nanopowders obtained by ball milling in air atmosphere. The post-thermal treatment induces grain coalescence and grain growth, crystallite size growth as well as compositional changes in the nanocomposite, decreasing the amount of the main phase, CoSb, and increasing the weight of secondary phase, CoSb, up to a 30 wt% at 600 °C. Remarkably, the average valence for the Co, Sb and Te absorbing atoms is neither transformed by the sintering process nor by the subsequent heat treatment. The functional response of the sintered thermoelectric nanocomposites exhibits a maximum figure of merit of 0.12(3) at room temperature for the nanocomposites sintered by CSP with a subsequent post-annealing at 500 °C. This is mainly due to its low thermal conductivity in comparison with similar powders sintered by other approaches, and it is explained by the morphological and structural properties. These findings represent an attractive alternative for obtaining efficient thermoelectric skutterudites by a scalable and cost-effective route., This work has been supported by the Ministerio Español de Ciencia e Innovación (MICINN) through the projects MAT2017-86540-C4-1-R, MAT2017-86540-C4-3-R, RTI2018-095303-A-C52, PID2020-114192RB-C41 and PID2020-118430GB-100. Part of these experiments were performed at the CLAESS-BL22 beamline at ALBA Synchrotron (Grant no. 2020094658) and in collaboration with ALBA staff. A.S. and C.V.M. acknowledge financial support from the Comunidad de Madrid for an “Atracción de Talento Investigador” Contract no. 2017-t2/IND5395 and 2019-t1/IND-13541, respectively. C.G.-M. acknowledges financial support from MICINN through the “Juan de la Cierva” program (FJC2018-035532-I). A.M. is indebted to MICINN for the “Ramón y Cajal” contract (RYC-2013-14436), which is co-financed with European Social Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

CNTs/Fe-BTC Composite Materials for the CO2-Photocatalytic Reduction to Clean Fuels: Batch and Continuous System

  • Rojas García, Elizabeth
  • Pérez-Soreque, Gloria
  • López Medina, Ricardo
  • Rubio Marcos, Fernando
  • Maubert-Franco, Ana M.
CNTs/Fe-BTC composite materials were synthesized with the one-step solvothermal method. MWCNTs and SWCNTs were incorporated in situ during synthesis. The composite materials were characterized by different analytical techniques and used in the CO2-photocatalytic reduction to value-added products and clean fuels. In the incorporation of CNTs into Fe-BTC, better physical–chemical and optical properties were observed compared to Fe-BTC pristine. SEM images showed that CNTs were incorporated into the porous structure of Fe-BTC, indicating the synergy between them. Fe-BTC pristine showed to be selective to ethanol and methanol; although, it was more selective to ethanol. However, the incorporation of small amounts of CNTs into Fe-BTC not only showed higher production rates but changes in the selectivity compared with the Fe-BTC pristine were also observed. It is important to mention that the incorporation of CNTs into MOF Fe-BTC allowed for increasing the mobility of electrons, decreasing the recombination of charge carriers (electron/hole), and increasing the photocatalytic activity. In both reaction systems (batch and continuous), composite materials showed to be selective towards methanol and ethanol; however, in the continuous system, lower production rates were observed due to the decrease in the residence time compared to the batch system. Therefore, these composite materials are very promising systems to convert CO2 to clean fuels that could replace fossil fuels soon., This research was funded by Universidad Autónoma Metropolitana-Azcapotzalco (Mexican University) and MINECO (Spanish Government) project PID2020-114192RBC41. F.R.-M. also acknowledges financial support from Comunidad de Madrid for a “Doctorados In-dustriales” project (IND2020/IND-17375), which is co-financed by the European Social Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Reversible optical control of magnetism in engineered artificial multiferroics

  • Ochoa, Diego A.
  • Menéndez, Enric
  • López-Sánchez, Jesús
  • Campo, Adolfo del
  • Ma, Zheng
  • Spasojević, Irena
  • Fina, Ignasi
  • Fernández, José F.
  • Rubio Marcos, Fernando
  • Sort, Jordi
  • García, José E.
Optical means instead of electric fields may offer a new pathway for low-power and wireless control of magnetism, holding great potential to design next-generation memory and spintronic devices. Artificial multiferroic materials have shown remarkable suitability as platforms towards the optical control of magnetic properties. However, the practical use of magnetic modulation should be both stable and reversible and, particularly, it should occur at room temperature. Here we show an unprecedented reversible modulation of magnetism using low-intensity visible-light in Fe75Al25/BaTiO3 heterostructures, at room temperature. This is enabled by the existence of highly oriented charged domain walls arranged in arrays of alternating in-plane and out-of-plane ferroelectric domains with stripe morphology. Light actuation yields a net anisotropic stress caused by ferroelectric domain switching, which leads to a 90-degree reorientation of the magnetic easy axis. Significant changes in the coercivity and squareness ratio of the hysteresis loops can be light-modulated, encouraging the development of novel low energy-consumption wireless magneto-optical devices., Financial support from the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033), through the Severo Ochoa FUNFUTURE (CEX2019-000917-S), PID2020-112548RB-I00, PID2020-116844RB-C21, PID2019-107727RB-I00, PIE: 2021-60-E-030, PIE: 2010-6-OE-013, and PID2020-114192RB-C41 projects program, from Generalitat de Catalunya (2021 SGR 00804 and 2021 SGR 00651), the European Research Council (2021-ERC-Advanced ‘REMINDS’ Grant No. 101054687) and MCIN/AEI/10.13039/501100011033 & “European Union NextGenerationEU/PRTR” (Grant CNS2022-135230) is acknowledged. We also acknowledge projects TED2021-130453B-C21, TED2021-130453B-C22 and TED2021-130957B-C51, funded by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/50110001103). E. M. is a Serra-Húnter fellow. F. R.-M. is indebted to Comunidad de Madrid for the financial support through the Doctorados Industriales project (IND2020/IND-17375), which is co-financed by the European Social Fund. J. L.-S. acknowledges the financial support from MCIN for the “Ramón y Cajal” contract RYC2022-035912-I, funded by the European Social Fund Plus. The authors also acknowledge the provision of the SpLine CRG BM25 beamline under the project MA-5601 at the European Synchrotron Radiation Facility (ESRF). Dr Juan Rubio-Zuazo and Mr Carlos Beltrán-Hernando are acknowledged for their assistance with the synchrotron XRD measurements., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Light-induced strain and its correlation with the optical absorption at charged domain walls in polycrystalline ferroelectrics

  • Rubio Marcos, Fernando
  • Pamies, Paula
  • Campo, Ángel Adolfo del
  • Tiana, Jordi
  • Ordoñez-Pimentel, Jonathan
  • Venet, Michel
  • Rojas-Hernández, Rocío E.
  • Ochoa, Diego A.
  • Fernández Lozano, José Francisco
  • José E. García
[EN] Photostrictive materials have a growing interest because of their great potential as light-driven actuators, among other optomechanical applications. In this context, the optical control of macroscopic strain in ferroelectrics has recently attracted remarkable attention as an effective alternative to the conventional electric control of strain. Here, a clear correlation between optical absorption and light-induced strain in polycrystalline BaTiO is shown. Specifically, the grain size and the sample thickness dependence of optical absorption when the material is irradiated with energy photons lower than the band gap evidence that light absorption at charged domain walls is the core of the observed photo-response in ferroelectrics. The photoinduced electronic reconstruction phenomenon is proposed as the primary physical mechanism for light absorption at charged domain walls. Results open a new pathway to designing ferroelectric-based devices with new functionalities like thickness gradient-based photo-controlled nanoactuators., This work is supported by the AEI (Spanish Government) projects PGC2018-099158-B-I00 and PID2020-114192RB-C41. M.V. acknowledges support from the São Paulo Research Foundation FAPESP (grant number 2022/08030-5) and the Brazilian CNPq (process 304144/2021-5). J.E.G. wishes to thank the Becas Iberoamérica Santander Investigación 2020–2021 program for their financial support. F.R-M. is indebted to Comunidad de Madrid for the financial support through the Doctorados Industriales project (IND2020/IND-17375), which is co-financed by the European Social Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of Antimony Content on Transition Behavior and Electric Properties of (K0.44Na0.52Li0.04)(Nb0.9−xTa0.10Sbx)O3 Ceramics

  • Difeo, Mauro
  • Rubio Marcos, Fernando
  • Gibbs, Florencia
  • Castro, Miriam
  • Ramajo, Leandro
[EN] Here, (KNaLi)(NbTaSb)O [KNL−(NTS)] lead-free ceramics with potential technological applications are made through B-position substitution on the perovskite structure by Sb ions. This strategy generates crystal structure changes and stabilizes a tetragonal symmetry, T, giving place to an orthorhombic (O–T) phase boundary close to room temperature. Specifically, our results establish that an increase in relative volume fractions of the T on the O–T phase boundary produces an increase in functional properties. More relevantly, this improvement in properties is accompanied by controlling the grain size. Therefore, an increase in grain size promotes the increased domain size, favoring more domain wall motion and domain switching. Both effects result in an increase in the d coefficient. Finally, we believe this work helps to understand the factors that determine the improvement in the functional properties of the KNN–based piezoelectric ceramics., The authors would like to thank National University of Mar del Plata (Argentina) Project (15/G577) and CONICET (PIP 2487) for providing financial support. F. Rubio-Marcos is indebted to MINECO (Spanish Government) project PID2020-114192RB–C41 and acknowledges financial support from Comunidad de Madrid for the “Doctorados Industriales” project (IND2020/IND–17375), which is co-financed by the European Social Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Generation of Defective Few-Layered Graphene Mesostructures by High-Energy Ball Milling and Their Combination with FeSiCuNbB Microwires for Reinforcing Microwave Absorbing Properties

  • López-Sánchez, Jesús
  • Peña, Álvaro
  • Serrano, Aída
  • Del Campo, Adolfo
  • Rodríguez de la Fuente, Óscar
  • Carmona, N.
  • Matatagui, Daniel
  • Horrillo, Carmen
  • Rubio-Zuazo, J.
  • Navarro, Elena
  • Marín, Pilar
15 páginas, 9 figuras, 4 tablas, Defective few-layered graphene mesostructures (DFLGMs) are produced from graphite flakes by high-energy milling processes. We obtain an accurate control of the generated mesostructures, as well as of the amount and classification of the structural defects formed, providing a functional material for microwave absorption purposes. Working under far-field conditions, competitive values of minimum reflection loss coefficient (RLmin) = ¿21.76 dB and EAB = 4.77 dB are achieved when DFLGMs are immersed in paints at a low volume fraction (1.95%). One step forward is developed by combining them with the excellent absorption behavior that offers amorphous Fe73.5Si13.5B9Cu1Nb microwires (MWs), varying their filling contents, which are below 3%. We obtain a RLmin improvement of 47% (¿53.08 dB) and an EAB enhancement of 137% (4 dB) compared to those obtained by MW-based paints. Furthermore, a fmin tunability is demonstrated, maintaining similar RLmin and EAB values, irrespective of an ideal matching thickness. In this scenario, the Maxwell-Garnet standard model is valid, and dielectric losses mainly come from multiple reflections, interfacial and dielectric polarizations, which greatly boost the microwave attenuation of MWs. The present concept can remarkably enhance not only the MW attenuation but can also apply to other microwave absorption architectures of technological interest by adding low quantities of DFLGMs., The present work has been supported by the Ministerio Español de Ciencia e Innovación (MICINN) through the projects: PIE-2010-OE-013-200014, PIE 2021-60-E-030, RTI2018-095856-B-C21, and RTI2018-095303-A-C52; Ministerio de Asuntos Económicos y Transformación Digital (MINECO) by PID2020-114192RB-C41; and Comunidad de Madrid, Spain, by S2018/NMT-4321 NANOMAGCOST. MICINN also supports A.S., D.M., and A.P. through the grants RYC2021-031236-I, RYC2021-031166-I, and PRE2019-0875001234, respectively, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Highly textured zinc aluminate: Nd, Ce films over sapphire for NIR emitting applications

  • Rojas-Hernández, Rocío E.
  • Rubio Marcos, Fernando
  • Serrano Rubio, Aída
  • Román-Sánchez, Sara
  • Fernández Lozano, José Francisco
  • Hussainova, Irina
[EN] The development of sapphire-compatible optical sources is highly valued due to the potential cost-effective applications in sapphire-based integrated devices. In this work, a screen printing technique assisted by a molten salt flux was used to synthesize (hk0)-textured ZnAl2O4: Nd, Ce sub-micron films deposited over the sapphire substrate. The study is focused at controlling Ce concentration in the emitting layers, as well as determining the key parameters to be met for the development of ZnAl2O4-based films of high efficiency and remarkable optical properties. A degree of crystallinity of the ZnAl2O4-based films, and a precise adjustment of texture are the keys parameters for further improvement of NIR luminescence efficiency. Specifically, (hk0)- textured films were developed at sintering temperature of around 1300 ◦C, which contributed to a higher NIR emission intensity as compared to that of (hkl)-untextured films. Therefore, the design process carried out in this work promotes a feasible way to achieve a high NIR emission performance, demonstrating the validity of the approach for a wide range of applications., The financial support from the Estonian Research Council (grants PSG-466, PRG-643) is gratefully acknowledged. F. Rubio-Marcos is indebted to MINECO (Spanish Government) project PID2020- 114192RB-C41 and acknowledges financial support from Comunidad de Madrid for the “Doctorados Industriales” project (IND2020/IND- 17375), which is co-financed by the European Social Fund. Part of these experiments was performed at the CLAESS beamline at ALBA Synchrotron during the execution of an awarded Beamtime. A.S. acknowledges financial support from the Comunidad de Madrid for an “Atracci´on de Talento Investigador” contract No. 2017-t2/IND5395 and to MINECO through the project RTI2018-095303-A-C52., Supplementary data to this article can be found online at https://doi. org/10.1016/j.ceramint.2022.12.190, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Implementing a sol-gel route to adjust the structural and dielectric characteristics of Bi and Fe co-doped BaTiO3 ceramics

  • Gouadria, Hamida
  • Smari, Mourad
  • Mnasri, Taoufik
  • Necib, Jallouli
  • López-Sánchez, Jesús
  • Marín, Pilar
  • Jamale, Atul P.
  • Younes, Rached Ben
[EN] The present work explores the impact of Fe insertion on the physical properties of Ba0.95Bi0.05Ti1-xFexO3 (x = 0.025, 0.050, and 0.075) prepared via sol gel method. The resulting samples crystallize in the tetragonal structure with space group P4mm and their morphological features point out the variation of the microstructure with Fe content. In turn, the dielectric constant versus temperature plot reveals the existence of two transition phases: the first one is ferroelectric-paraelectric transition phase (TF-P) and the second one is ferroelectric orthorhombic - ferroelectric tetragonal phase (TO-T). Analysis of conductivity curves using Jonscher’s augmented equation (for x = 0.025) and Jonscher’s power law (for x = 0.075) suggests the Non-Overlapping Small Polaron Tunneling (NSPT) model as a conduction mechanism., Hamida Gouadria acknowledges funding from the Tunisian Ministry of Higher Education and Scientific Research. Mourad Smari acknowledges the financial support from the Program Ulam NAWA (Polish National Agency for Academic Exchange) under the project BPN/ULM/ 2021/1/00015/U/00001. Jesús L´opez S´anchez receives funding from the Ministerio de Asuntos Econ´omicos y Transformaci´on Digital (MINECO) through the project PID2020-114192RB-C41. Pilar Marín acknowledges the financial support from the Ministerio de Ciencia e Innovaci´on (MICINN) through the project RTI2018-095856-B-C21 and Comunidad de Madrid by S2018/NMT-4321 "NANOMAGCOST"., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Spectroscopic properties, conduction processes and the Summerfield scaling of barium titanate ceramics based on Bi and Fe

  • Gouadria, Hamida
  • Mnasri, Taoufik
  • Jamale, Atul P.
  • López-Sánchez, Jesús
  • Necib, Jallouli
  • Marín, Pilar
  • Carmona, N.
  • Smari, Mourad
[EN] In this study, the effects of Bi and Fe on the optical and electrical qualities of BaTiO3 made with the sol–gel method are examined. On the one hand, UV–visible spectroscopy is used to study the sample's optical behavior. This shows that the band gap energy is lower with Bi and Fe doping than with pure BaTiO3. On the other hand, an impedance spectroscopy investigation is carried out to reveal the conduction processes in the frequency range of 102 to 107 Hz and the temperature range of 450–650 K. This examination is carried out to investigate the conduction mechanisms. The conduction mechanism in the elaborated material is best described by the Overlapping Large Polaron Tunnelling model (OLPT), where the exponent s drops with temperature until reaching a minimal value, at which point it grows again. In addition, the Summerfield scaling method is used to investigate the relationship between conductivity and temperature. When the scaled curves are combined into one master curve, it shows that the time–temperature superposition principle (TTSP) is true and that Koop's concept about how the dielectric constant change with frequency is valid. So, the results give us new information about the optical and dielectric qualities of the functional barium titanate ceramics based on Bi and Fe., Hamida Gouadria acknowledges funding from the Tunisian Ministry of Higher Education and Scientific Research. Mourad Smari acknowledges the financial support from the Program Ulam NAWA (Polish National Agency for Academic Exchange) under the project BPN/ULM/2021/1/00015/U/00001. Jesús López Sánchez receives funding from the Ministerio de Asuntos Económicos y Transformación Digital (MINECO) through the project PID2020-114192RB-C41. Pilar Marín acknowledges the financial support from the Ministerio de Ciencia e Innovación (MICINN) through the project RTI2018-095856-B-C21 and Comunidad de Madrid by S2018/NMT-4321 “NANOMAGCOST”, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Doping engineering for controlled hydration and mechanical properties in Portland cement mortar with ultra-low ZnO concentration

  • Roberta Tamashiro, Jacqueline
  • Rubia, Miguel Ángel de la
  • Rubio Marcos, Fernando
  • Rojas-Hernández, Rocío E.
  • Pereira Silva, Lucas Henrique
  • Friol Guedes de Paiva, Fabio
  • Kinoshita, Angela
  • Moragues Terrades, Amparo
[EN] The incorporation of ZnO into cementitious matrices elicits notable alterations in the hydration process, consequently influencing the setting time. Nonetheless, comprehensive investigations exploring the impact of ZnO particle morphology on cement hydration remain limited. In this study, we present a comprehensive exploration of how the morphology of ZnO dopants can be harnessed to modulate the hydration process, concomitantly resulting in significant improvements in mechanical properties. Specifically, we have identified that ZnO nanoparticles (ZnO-Nps) exhibit a unique capacity to delay cement hydration by instigating the formation of a continuous zinc hydroxide coating. This coating remarkably inhibits the progression of cement hydration. Notably, this delay in the hydration process amounts to an approximately 76% compared to the reference material. However, a distinctive transformation occurs with ZnO microparticles (ZnO-Mps) exhibiting a flower-like morphology. In this case, the continuous coating becomes discontinuous, leading to a marked enhancement in mechanical properties. These enhancements manifest as an increase ranging between 13 and 10% in comparison to the reference material. Our results underscore the pivotal role of ZnO particle morphology in tailoring the hydration process and concurrently elevating mechanical properties. This study contributes to elucidating the intricate interplay between morphology, hydration kinetics, and mechanical behavior within cementitious systems. The ability to harness these morphology-dependent effects offers a promising avenue for optimizing material properties and advancing our understanding of cementitious systems., This study was financed in part by the Coordination for the Improvement of Higher Education Personnel (CAPES) - Brazil - Finance Code 001. J.R.T. thanks CAPES (grants 88887.749326/2022-00). F.R-M. is grateful to MINECO (Spanish Government) project PID2020-114192RB-C41 and financial support from Comunidad de Madrid for the “Doctorados Industriales”, project (IND2020/IND-17375), co-financed by the European Social Fund. R.E.R.H. is thankful to Estonian Research Council (grants PSG-466). A.K. thanks the National Council for Scientific and Technological Development (CNPq grants 309186/2020–0). M.A.R thanks Ministry of Science and Innovation, MCIN (Spanish Government) project PID2021-128616OB-I000, DIHORNARE., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A suitable approach to achieve functional (Bi, Na)TiO3‑based lead‑free piezoceramics via compositional design for energy storage applications

  • Difeo, Mauro
  • Rubio Marcos, Fernando
  • Campo, Ángel Adolfo del
  • Castro, Miriam
  • Ramajo, Leandro
[EN] In this work, sodium bismuth titanate based lead-free piezoceramics with modifiable dielectric and energy storage properties by compositional modification through Nb doping (0.94Bi0.5Na0.5TiO3–0.06BaTiO3–xNb2O5) were obtained. Nb doping on 0.94Bi0.5Na0.5TiO3–0.06BaTiO3-based ceramics produces a bifunctional behavior, which is governed by controlling the structural and microstructural characteristics of the system. Whereby the incorporation of Nb+5 leads to a change from rhombohedral–tetragonal (R–T) multiphasic coexistence to a tetragonal (T) phase at room temperature (RT) and causes a decrease in average grain size. The particularly high piezoelectric coefficient (d33), in the R–T multiphase coexistence region, facilitates the polarization and leads to a higher piezoelectric response than in the T-region. Meanwhile, increasing the Nb content improves the energy storage properties and results in a storage of energy value (Wrec) up to about 0.50 J/cm3 at room temperature., The Spanish Ministry of Economy and Competitiveness (MINECO) provided support for this work under project PID2020-114192RB-C41. FR-M received financial assistance from the Comunidad de Madrid for the “Doctorados Industriales” project (IND2020/ IND-17375), co-financed by the European Social Fund. MD, MC, LR would like to express their gratitude for the support they received from CONICET and the National University of Mar del Plata (Argentina)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Stress dynamics during O-T phase transitions in lead-free KNN-based piezoelectric ceramics

  • Moure Arroyo, Alberto
  • Val-Gómez, P.
  • Campo, Ángel Adolfo del
  • Fernández Lozano, José Francisco
  • Rubio Marcos, Fernando
[EN] In this study, we have investigated the stress dynamics arising from the Orthorhombic-Tetragonal Polymorphic Phase Boundary (PPB) in lead-free potassium sodium niobate (KNN)-based ceramics and its temperature dependence, as a means to elucidate the characteristics of PPBs in lead-free piezoelectric oxides. The dynamics are dictated by the phase transitions that occur upon cooling from the cubic phase and the coexistence of different crystal structures. Our findings reveal that the growth of Orthorhombic phases is constrained by the high-temperature tetragonal phase distributions. In particular, it is evidenced that two main mechanisms regulate the decrease of stress processes in which structural and microstructural effects are correlated; the first one is associated to a purely microstructural effect in which bimodal grain distribution hinders the formation of non-180° domains. By contrast, the second is mainly governed by ferroelectric domain distribution and the occurrence of pseudo-cubic regions around room temperature associated with local structural heterogeneity (that is, polar nano regions, PNRs). Specifically, these mechanisms generate regions with different stress state and explain the widening of the phase transition due the phase coexistence., This work was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) under the project PID2020-114192RB-C41. Dr. Alberto Moure is indebted to MINECO for a ‘Ramon y Cajal’ contract (ref: RYC-2013-14436), which is co-financed by the European Social Fund. F.R-M. also acknowledges financial support from Comunidad de Madrid for an “Doctorados In-dustriales” proyect (IND2020/IND-17375), which is co-financed by the European Social Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Cost-effective screen printing approach for Ce/Nd-doped ZnAl2O4 films: tuning crystallinity induced by the substrate

  • Rojas-Hernández, Rocío E.
  • Rubio Marcos, Fernando
  • Necib, Jallouli
  • Danilson, Mati
  • Fernández Lozano, José Francisco
  • Hussainova, Irina
Electronic supplementary information (ESI) available. See DOI: https://doi.org/ 10.1039/d3cp02005c, [EN] Near-infrared (NIR) emitting phosphors are currently receiving considerable attention owing to their high demand in various applications, such as light detection and ranging (LiDAR), short-range communications, security, biosensing and night vision lighting applications. The miniaturization of photonic components demands the integration of thin films into exploitable devices. In this context, NIR emitting ZnAl2O4:Ce/Nd films of hundreds of nanometer thickness are synthesized using a scalable and cost-efficient approach to screen printing. Cerium co-doping is responsible for the Nd emission in the NIR through energy transfer by exciting the films under UV excitation at around 360 nm. Through the proper design of ink, dense Nd/Ce doped ZnAl2O4 ceramic films were produced using polycrystalline alumina. The use of polycrystalline alumina substrates opens up new opportunities because this ceramic is a cheap and well-known substrate for optoelectronic packaging. During manufacturing, as a direct effect of predominant crystal growth over the polycrystalline alumina substrate, an increase in emission intensity is achieved. The results obtained by X-ray photoelectron (XPS) and X-ray absorption near edge spectroscopy (XANES) serve to determine the oxidation state of Ce. The findings of this study indicate that a higher concentration of Ce4+ promotes NIR emission. This study may contribute to a better understanding of film production processes of films based on the ZnAl2O4 matrix and guide future studies on films for NIR emitters., R.E Rojas-Hernandez and I. Hussainova acknowledge the support of the Estonian Research Council (grants PSG-466, PRG-643). F. Rubio-Marcos also acknowledges the MINECO (Spanish Government) project PID2020-114192RB-C41 and financial support from Comunidad de Madrid for the “Doctorados Industriales” project (IND2020/IND-17375), which is co-financed by the European Social Fund. The authors are grateful to Oliver Jäarvik for allowing us to use the facilities at the Department of Energy Technology. We express thanks to the Marit Kauk-Kuusik group for allowing us to use the laboratory facilities. M. Danilson acknowledges the European Union through the European Regional Development Fund, Project TK141 and the Estonian Research Council grant (PRG1023). The authors recognized the support of ALBA Synchrotron to provide the beamtime to perform the XANES experiments included in the research., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Promoting the circularity of ceramic materials through cold sintering of aggregates from construction and demolition waste

  • Marín Cortés, Sonia
  • Biesuz, Mattia
  • Serrano, Aida
  • De Bona, Emanuele
  • Enríquez Pérez, Esther
  • Fernández Lozano, José Francisco
  • Sglavo, Vincenzo M.
10 pags., 6 figs., A ceramic composition containing 95 wt% of construction and demolition waste-like material was consolidated by cold sintering process at 200 °C using KOH water solutions as the liquid medium. The relative density of the samples reaches ∼90 % of the theoretical one for process conditions of 600 MPa and 60 min. A post-annealing process at 1100 °C of the as-cold sintered samples causes a slight increase in the relative density and of their mechanical strength compared with conventionally sintered samples at 1100 °C and increases the shape factor of the Weibull distribution, thus increasing the reliability of the component. It is shown that cold sintering of the material avoids its high pyroplasticity, providing low shrinkage and reducing internal defects in the ceramic. This work represents the first exploration of the viability of manufacturing ceramic tiles with high recycled content contributing to the transition to a greener world., The authors gratefully acknowledge the financial support of the European Union's Horizon 2020 research and innovation programs ICEBERG (No. 869336) for their financial support. This work was supported by the project PID2020-114192RB-C41 funded by MCIN/AEI/10.13039/501100011033 and by ‘‘ERDF A way of making Europe’‘. The authors are grateful to the JECS Trust for funding the visit of S. M-C. to the Department of Industrial Engineering, University of Trento, Italy (Contract No. 2022336). A.S. acknowledges financial support from PID2021-124585NB-C33 funded by MCIN/AEI/10.13039/501100011033 and by ‘‘ERDF A way of making Europe’‘, by Project TED2021-130957B-C51 funded by MCIN/AEI/10.13039/501100011033 and by the ‘‘European Union NextGenerationEU/PRTR’’ and from grant RYC2021-031236-I funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dense ceramics by cold reaction sintering using 95 % powdered construction and demolition waste and sodium silicate

  • Marín Cortés, Sonia
  • Serrano, Aida
  • Enríquez Pérez, Esther
  • Fernández Lozano, José Francisco
10 pags. 7 figs., 2 tabs., This work explores the feasibility of producing ceramic-like materials from recycled construction and demolition waste through cold reaction sintering using sodium silicate as the liquid medium. The recycled material consists of a mixture of ceramics, mortar, and/or plasterboard - common building materials. Samples containing 95 wt% of recycled content were successfully fabricated at 150 ºC, a considerably lower temperature compared to conventional ceramic processes. These samples exhibited dense microstructures with relative densities of ∼ 90 %, as well as promising mechanical properties, including Vickers hardness values comparable to conventional bricks. In particular, samples with 30 % non-ceramic material showed more than twice the hardness when mortar was incorporated. Leaching tests confirmed the chemical stability of the material, with the incorporation of Ca²⁺ ions into non-leachable species, suggesting a reaction during CRS that enhances its durability. Additionally, FTIR analysis showed a blueshift in the signature from 973 cm⁻¹ to 1041 cm⁻¹ under more aggressive conditions, indicating structural changes and improved leachability. The primary advantage of this process would lie in the high recycled content used to create materials. This proposed new method allows obtaining dense pieces at very low temperatures, which also supposes a reduction of energy consumption, and therefore, an improvement of the sustainability of the production process. Given that this construction and demolition waste are often limited to not high added values, this approach not only supports environmental sustainability and resource conservation but also offers a viable pathway to decarbonizing the ceramic industry., The authors gratefully acknowledge the financial support of the European Union’s Horizon 2020 research and innovation programs ICEBERG (No. 869336) for their financial support. This work was supported by the Spanish Ministry for Science and Innovation (MCIN) under the project PID2020–114192RB-C41 and PID2021–124585NB-C33 funded by MCIN/AEI/10.13039/501100011033 and by ‘‘ERDF A way of making Europe’’ and by Project T130957B-C51ED2021– funded by MCIN/AEI/10.13039/501100011033 and by the ‘‘European Union NextGenerationEU/PRTR’’. A.S. acknowledges financial support from grant RYC2021–031236-I funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Cold sintering of complex-shaped ceramic materials

  • Marín Cortés, Sonia
  • Biesuz, Mattia
  • Bhandari, Subhadip
  • Franchin, Giorgia
  • Enríquez Pérez, Esther
  • Fernández Lozano, José Francisco
  • Sglavo, Vincenzo M.
7 pages, 4 figures, 2 tables, The present work explores for the first time the production of ceramic bodies with complex shape through the cold sintering process. Inspired by previous works on spark plasma sintering, a spacer accessory was designed to act as a removable mold. This proof-of-concept was tested with four different ceramic systems: biogenic hydroxyapatite, zinc oxide, diatomaceous earth and construction/demolition waste materials. In all cases, the density is comparable to that obtained by cold sintering of simpler disks. Moreover, the microstructure of the complex-shaped materials is substantially homogeneous in the entire component. Some distortions can be detected when comparing the spacer and sample shape, their control and modeling being a key challenge for future works., The authors gratefully acknowledge the financial support of the European Union’s Horizon 2020 Research and Innovation Programs ICEBERG (No. 869336) for their financial support. Subhadip Bhandari gratefully acknowledges the CARIPARO Foundation, Padova, Italy, for his Ph.D. scholarship. This work was supported by the Spanish Ministry for Science and Innovation (MCIN) under the project PID2020114192RB-C41. UNITN is also acknowledged for the financial support and the used facilities., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Advances in ZnO nanoparticles in building material: Antimicrobial and photocatalytic applications – Systematic literature review

  • Klienchen de Maria, V.P.
  • Guedes de Paiva, F.F.
  • Tamashiro, J.R.
  • Silva, L.H.P.
  • Silva Pinho, Gabriela da
  • Rubio Marcos, Fernando
  • Kinoshita, A.
Nanomaterial integration in building materials has become a pivotal approach to provide cementitious composites with dual functionality, namely photocatalytic and antimicrobial attributes, conferring self-cleaning and anti-polluting characteristics to these materials. We conducted a systematic literature review on the photocatalytic and antimicrobial properties of ZnO-NP in construction materials, selecting all articles from the last 5 years. We performed a search on the Web of Science and 25 articles were selected consistent with the study purpose, after the filtration process aligned with PRISMA guidelines. This is the first article on this topic using a methodological review, covering all recent literature and the most cited articles from recent decades. Although the volume of articles is still limited, it was possible to identify the most efficient percentages of ZnO-NP in different construction materials (paint, mortar, concrete, wood, others). The main applications, challenges, and themes for future research are discussed to produce safer and more sustainable materials and with potential to be used in the civil construction industry. © 2024 Elsevier Ltd, This study was financed in part by the Coordination for the Improvement of Higher Education Personnel (CAPES) - Brazil – Finance Code 001. J.R.T. thanks CAPES (grants 88887.749326/2022-00), A.K. thanks the National Council for Scientific and Technological Development (CNPq grants 309186/2020-0), F. R-M. also thank the financial support from the Spanish Ministry of Science and Innovation through PID2020-114192RB-C41 and TED2021-130957B-C51 projects, funded by the Spanish Ministry of Science and Innovation F. R-M. is indebted to Comunidad de Madrid for the financial support through the Doctorados Industriales project (IND2020/IND-17375), which is co-financed by the European Social Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Flash sintering of potassium-sodium niobate-based piezoceramics: Refining (micro)structure for properties enhancement

  • López-Blanco, Samuel
  • Rubio Marcos, Fernando
  • Barrón, Andrea
  • Ochoa, Diego A.
  • García, José E.
Low-consumption ceramics processing routes are expected to replace conventional ones due to environmental concerns. In this context, flash sintering is garnering interest because it allows dense ceramics to be obtained in just a few minutes and at relatively low temperatures. This is particularly interesting for sintering alkaline-based compounds due to the easy volatilization of these elements. In this work, current-controlled flash sintering is used to obtain potassium-sodium niobate (KNN)-based piezoceramics with refined microstructure and suitable stoichiometry, leading to improved functional properties. KNN-based materials are currently outstanding lead-free piezoceramics, with their properties highly sensitive to the proper construction of the polymorphic phase boundary, as in the case of the first promising composition (K0.44Na0.52Li0.04)(Nb0.86Ta0.10Sb0.04)O3. Results of this work show that sintering parameters may determine the polymorphic behavior of this system, thereby evincing flash sintering allows polymorphic phase boundary to be fine-tuned. It is demonstrated that the convergence of microstructure refinement and compositional control holds the potential for enhancing properties through a proper electric current control during flash sintering. © 2024 The Authors, S. L -B. thanks Agencia de Gestio d'Ajuts Universitaris i de Recerca (AGAUR), Catalonia, Spain, for the FI-SDUR contract (2020 FISDU 00489). F. R -M. acknowledges the financial support from the Spanish Ministry of Science and Innovation through PID2020-114192RB-C41 and TED2021-130957B-C51 projects. F. R -M. is also indebted to Comunidad de Madrid for the financial support through the Doctorados Industriales project (IND2020/IND-17375), which is co-financed by the European Social Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Innovative strategies for nitrogen-incorporating silicon oxycarbide-based preceramic polymer synthesis

  • Pérez-Román, Berta
  • Merchán del Real, A.
  • Rubio Alonso, Juan
  • Mazo Fernández, María Alejandra
  • Rubio Marcos, Fernando
In this study, we introduce a pioneering methodology for crafting silicon oxycarbonitride materials (SiOCN) by harnessing the intricate synergy between allyl-substituted hydrido polycarbosilane (AHPCS) and a novel triazine-based dendron, serving as a nitrogen-containing polymeric precursor. The synthetic journey involves meticulous hydrosilylation reactions between AHPCS's Si-H moieties and the -CH = CH2 groups embedded within the triazine dendritic architecture, followed by controlled pyrolysis under an argon atmosphere at temperatures up to 900 °C. Through systematic variations in reaction durations and pyrolytic temperatures, we uncover the prevalence of SiC4−xOx motifs within the material matrix, with oxygen content modulation observed in samples under extended reaction times and heightened pyrolysis temperatures. Nitrogen-based bonding's paramount importance within the N-containing polymeric precursor is also established, revealing a preference for retaining N sp2-C over N sp3-C bonds due to intricate nitrogen-AHPCS interactions that yield robust Si-N linkages. This inquiry not only advances our fundamental understanding but also charts a course for tailoring silicon oxycarbonitride -SiOCN- material properties. Promisingly, these advancements position such materials as prospective candidates for high-energy silicon oxycarbonitride-based supercapacitors, bridging pioneering materials science with sustainable energy storage technology. © 2024 The Author(s).., Financial support from the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033), through the PID2020-114192RB-C41 project program and Comunidad de Madrid for the financial support through the Doctorados Industriales project (IND2020/IND-17375), which is co-financed by the European Social Fund. We also acknowledge projects TED2021-130957B-C51 and TED2021-132800B-I00, funded by the Spanish Ministry of Science and Innovation., Supplementary material, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Modulating the magnetic properties of Fe3C/C encapsulated core/shell nanoparticles for potential prospects in biomedicine

  • Castellano-Soria, A.
  • López-Méndez, R.
  • Espinosa, A.
  • Granados-Miralles, Cecilia
  • Varela, M.
  • Marín, P.
  • Navarro, E.
  • López-Sánchez, Jesús
In the pursuit of alternative and less invasive medical treatments, magnetic nanoparticles (NPs) have gained significant relevance. Iron carbides NPs stand out for their higher saturation magnetizations compared to iron oxides, while maintaining a suitable biocompatibility. In this work, high control is achieved over the composition and morphology of Fe3C/C encapsulated core/shell nanoparticles through fine-tuning of the sol-gel synthesis parameters. Specifically, the impact of decreasing each surfactant concentration added, nt, the same both for oleylamine (ON) and oleic acid (OA), has been explored. A minimum value for such parameter denoted by nt,min. was required to produce pure Fe3C@C NP-composites. For nt < 4 mmol, some minor α-Fe impurities arise, and the effective carburization becomes unstable due to insufficient carbon. The magnetic properties of the materials prepared were optimized by reducing the excess carbon from surfactants, resulting in saturation magnetization values of 86 emu/g. (for pure Fe3C at nt = 5 mmol) and 102 emu/g (for Fe3C and <2 % w.t. of α-Fe impurity at nt = 4 mmol). In view of this, several cytotoxicity studies for different Fe3C@C samples were conducted, exhibiting excellent biocompatibility in cell-based assays, which could lead to potential application at the forefront of biomedical fields. © 2024 The Authors, The work has been supported by the Ministerio de Ciencia e Innovacion (MCINN) through the projects PDC2022-133039-I00, PID2021-123112OB-C21-MICIIN, TED2021-129688B-C21, MAT2015-65445-C2-1-R, MAT2017-86450-C4-1-R, MAT2015-67557-C2-1-P, RTI2018-095856-B-C21, RTI2018-095303-A-C52, PID2020-114192RB-C41, PIE: 2021-60-E-030, PIE: 2010-6-OE-013, PID2021-122980OB-C51, FPI PRE2020-96246 grant (R.L-M.), and Comunidad de Madrid by NANOMAGCOST-CM, S2013/MIT-2850 NANOFRONTMAG, (MAD2D-CM)-UCM3, S2018/NMT-4321 NANOMAGCOST, 2018-T1/IND-1005 (A.E.) and S2022/BMD-7434 ASAP-CM. C.G.-M. acknowledges financial support from grant RYC2021-031181-I funded by MCIN/AEI/10.13039/501100011033 and by the "European Union NextGenerationEU/PRTR". J. L.-S. acknowledges the financial support from Spanish Ministry of Economic Affairs and Digital Transformation through the project PID2021-122980OB-C5 and from grant RYC2022-035912-I funded by MCIU/AEI/10.13039/501100011033 and by the European Social Fund Plus (ESF+). Electron microscopy measurements were carried out at the Centro Nacional de Microscopia Electronica at the Universidad Complutense de Madrid (ICTS ELECMI, UCM). The authors also acknowledge the BM25-SpLine Staff for their valuable help and the provision of the beamline under the projects A25-2-1053 and A25-2-1009., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Improving the reliability of silicon diodes via manufacturing process modification strategies

  • Román-Sánchez, Sara
  • París Ogáyar, Marina
  • Lorite, Israel
  • Fernández Lozano, José Francisco
  • Serrano Rubio, Aída
  • Moure Arroyo, Alberto
The multicomponent nature of power electronic devices can be an issue for their reliability due to the high currents and temperatures reached during operation. Proper design of each component and the system as a whole is mandatory to ensure a long lifetime and small failure rates. In this work, we systematically investigate the influence of manufacturing on the behavior of press-fit rectifier Si diodes by introducing changes in the manufacturing process. Concretely, we focused on the solder geometry and the epoxy component. Thermography measurements and computational modeling show that optimization of the solder thickness and its uniformity allows the diode to bear higher currents and temperatures close to 250 °C in the hottest parts of the device (located in the epoxy zones) without failure. In addition, choosing an adequate epoxy with a limited expansion rate over a wide temperature range helps to reduce stress and strain effects, preventing the breakdown of the diodes even at continuous currents up to 40 A. © 2023, This work was supported by the Spanish Ministry for Science and Innovation (MCIN) under the projects PID2021-124585NB-C33 and PID2020-114192RB-C41. S.R.-S. acknowledges the financial support from the FARDIO project to SEG Automotive Germany GmbH. M.P.O. acknowledges financial support from the Spanish Ministry of Universities, through the FPU program (FPU20/03166) . A.S. acknowledges the financial support from MCIN for a Ramon y Cajal contract (No. RYC2021-031236-I) , which is funded by the Recovery, Transformation and Resilience plan., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Assessment of thermo-mechanical phenomena in Si-based diodes via operando confocal Raman microscopy

  • Román-Sánchez, Sara
  • Moure Arroyo, Alberto
  • Campo, Ángel Adolfo del
  • Lorite, Israel
  • Fernández Lozano, José Francisco
  • Serrano Rubio, Aída
The deconvolution of the thermal and mechanical stress and other induced effects caused by the electrical current flowing through a semiconductor-based device is often quite challenging. In this work, a novel specific analysis procedure is successfully tested, based on the study of mapped regions from in situ characterization by confocal Raman microscopy. The width of Si T2g Raman mode and its position are used to determine the individual spatial distribution of all phenomena occurring in the Si chip at different current intensities. The method is applied to Si-based press-fit rectifier diodes in forward-bias conditions but can be extended to other devices. The analysis reveals the presence of several regions in the Si chip as a function of their doping level and stress magnitude. Results indicate that the Si component is subjected to a predominant thermal contribution along with other two contributions related to residual and electrically induced effects, whose values differ for each region. © 2024 The Author(s), This work was supported by the Spanish Ministry for Science and Innovation (MCIN) under the projects PID2021-124585NB-C33 funded by MCIN/AEI/10.13039/501100011033 and by "European Union NextGenerationEU/PRTR" and PID2020-114192RB-C41 funded by MCIN/AEI/10.13039/501100011033. S.R.-S. acknowledges the financial support from the FARDIO project to SEG Automotive Germany GmbH. A.S. acknowledges financial support from grant RYC2021-031236-I funded by MCIN/AEI/10.13039/501100011033 and by the "European Union NextGenerationEU/PRTR"., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On the potential of Transparent Rare-Earth-Free ZnAl2O4 Ceramics targeted at the UV-C to UV-B emission

  • Rojas-Hernández, Rocío E.
  • Rubio Marcos, Fernando
  • Romet, I.
  • Feldbach, E.
  • Buryi, M.
  • John, D.
  • Ivanov, R.
  • Hussainova, I.
  • Fernández Lozano, José Francisco
  • Nagirnyi, V.
Materials capable of emitting in the ultraviolet UV-C to UV-B spectral range have received considerable attention due to their potential applications in biophotonics, plant lighting, optical cleaning, sterilization, and disinfection. However, progress in the development of phosphors that emit in this short-wavelength range has been relatively sluggish. Most UV-C phosphors developed to date are based on hosts doped with the rare-earth cation Pr3+ due to its bright UV luminescence originating from the 4f15d1 → 4f2 interconfigurational transitions. In this study, we explore how the UV emission can be tailored to different wavelength ranges by developing rare-earth-free materials. Specifically, we demonstrate that UV-C to UV-B emission can be achieved in transparent ZnAl2O4 – based ceramics. For the first time, such transparent ceramics have been successfully produced with the help of reactive spark plasma sintering with SiO2 or LiF additives, which modified the process of grain growth resulting in an increase in the average grain size from 250 nm to 4 µm. Moreover, these additives also improved the optical transmission properties, with in-line transmission measurements at a wavelength of 550 nm reaching values of 50 % and nearly 65 % in the infrared region. Depending on the addition of SiO2 and LiF, the excitation by photons with energy exceeding 6.2 eV has generated the deep UV emission peaks in the range from 230 to 300 nm. Based on the analysis of the results of luminescence spectroscopy and EPR studies, the observed UV-C emission is suggested to originate from the excitons localised near oxygen vacancies. The number of vacancies is the highest in undoped ZnAl2O4 ceramics, whereas adding SiO2 and LiF suppresses their number and modifies their local environment due to changes in charge compensation, which in turn allows tuning the spectral position of the UV-C band. The quantum yield of the UV-C emission reached 5 % for undoped ZnAl2O4 ceramics. The sintered ZnAl2O4 transparent ceramic shows a versatile solution for next-generation rare-earth-free deep-UV devices. © 2024 Elsevier Ltd, The financial support from the Estonian Research Council (grants PSG-466 (R. E. Rojas-Hernandez), PRG-643 (I. Hussainova), PRG629 (V. Nagirnyi)) is gratefully acknowledged. Researchers from the University of Tartu, Estonia were supported also by the ERDF funding’s in Estonia granted to the Centre of Excellence TK141 “Advanced materials and high-technology devices for sustainable energetics, sensorics and nanoelectronics (HiTechDevices)” (grant no. TK141 2014–2020.4.01.15–0011). F. Rubio-Marcos is indebted to MICIU (Spanish Government) PID2020–114192RB-C41 and TED2021–130957B-C51 projects, and acknowledges financial support from Comunidad de Madrid for the “Doctorados Industriales” project (IND2020/IND-17375), which is co-financed by the European Social Fund. R.E. Rojas-Hernandez would like to dedicate this research article to her newborn son Antonio Nahuel who gives his never-ending inspiration., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ferroelectric domain structure in Bi4Ti3O12 ceramics: Insights from Confocal Raman Microscopy

  • Moure Arroyo, Alberto
  • López-Sánchez, Jesús
  • Campo, Ángel Adolfo del
  • Navarro-Rojero, M. G.
  • Fernández Lozano, José Francisco
  • Rubio Marcos, Fernando
Bismuth Layer-Structured Ferroelectric (BLSF) materials with Bi4Ti3O12 composition exhibit high ferroelectricity, potential for high-temperature piezoelectricity, and the puzzle of low polarizability, explored via textured ceramics and domain configurations. Here, we show that a distinctive stripe configuration of 90° domains emerges for large platelet-like grains, while the smallest grains, possessing a more equiaxial morphology, exhibit a needle-like domain structure that significantly impacts the ferroelectric properties of the ceramics. The observed hysteresis loops suggest that polarization is effectively clamped, owing to reduced mobility along the needle-like domain walls, thereby leading to a reduction in remnant polarization as grain size diminishes. It is elucidated that the domain structure is intricately linked to both internal stress within the grains and the presence of defects, notably oxygen vacancies, at the domain walls. Consequently, these multifaceted factors are identified as key determinants of the ferroelectric activity within ceramics bearing such a distinctive crystalline structure. © 2024 The Authors, Financial support from the Spanish Ministry of Science and Innovation through PID2020-114192RB-C41 and TED2021-130957B-C51 projects. F. R-M. is indebted to Comunidad de Madrid for the financial support through the Doctorados Industriales project (IND2020/IND-17375), which is co-financed by the European Social Fund. J. L.-S. acknowledges the financial support from grant RYC2022-035912-I funded by MCIU/AEI/10.13039/501100011033 and by the European Social Fund Plus (ESF+)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Tesis doctoral (DoctoralThesis)

Operando multiscale characterization of press-fit diodes as a pathway to improve their reliability, Caracterización multiescala de diodos rectificadores en condiciones de operación para mejorar su fiabilidad

  • Román-Sánchez, Sara
[EN] Silicon-based press-fit rectifier diodes play a crucial role in the automotive industry, but the mismatch between components may cause differences in their thermoelastic response and thus lead to the appearance of interfacial stress within the device in operando conditions at high temperatures. This thesis presents an exhaustive study of the behavior of various commercial Si-based press-fit rectifier diodes with different features and under different conditions. For that, a multiscale evaluation of the devices was performed by several advanced characterization methods, standing out techniques such as infrared thermography (IRT), confocal Raman microscopy (CRM) and single-crystal X-ray diffraction (SCXRD). Macroscopic thermal characterization revealed great differences in heat release between press-fit diodes, evaluating different designs and technologies during forward and reverse polarization. A reliability study based on those results, design and manufacturing process modifications were proposed and implemented by one of the commercial suppliers to improve the performance of the diodes. Microscopic and submicroscopic characterization of specific localized regions within the active Si semiconductor of the press-fit rectifier diodes was performed by ex-situ and in-operando studies enabled the semi-quantification of the different phenomena occurring at forward polarization conditions, as thermoelastic stresses and carrier dynamics, particularly at the semiconductor/solder interfaces Thus, this thesis provides a comprehensive analysis of the main parameters affecting the reliability of press-fit rectifier diodes for automotive applications. The findings highlight the importance of thermal release management and how crucial it is to optimize the design and manufacturing processes of the diodes to increase their useful lifetime. These insights will contribute to the development of more efficient press-fit rectifier diodes, ultimately improving the reliability of automotive mechanical to electrical transformation systems., [ES] Los diodos rectificadores de tipo press-fit basados en silicio desempeñan un papel crucial en la industria del automóvil. Sin embargo, el desacoplo termomécánico entre los componentes puede provocar diferencias en su respuesta termoelástica y, en consecuencia, la aparición de tensiones interfaciales dentro del dispositivo en condiciones operativas a altas temperaturas. Esta tesis presenta un estudio exhaustivo del comportamiento de diversos diodos rectificadores de tipo press-fit basados en silicio con diferentes características y bajo distintas condiciones. Para ello, se llevó a cabo una evaluación a múltiples escalas de los dispositivos mediante varios métodos avanzados de caracterización, destacando técnicas como la termografía infrarroja (IRT), la microscopía confocal Raman (CRM) y la difracción de rayos X de monocristal (SCXRD). La caracterización térmica macroscópica reveló grandes diferencias en la disipación de calor entre los diodos press-fit, evaluando distintos diseños y tecnologías durante la polarización directa e inversa. A partir de un estudio de fiabilidad basado en estos resultados, se propusieron y aplicaron modificaciones en el diseño y el proceso de fabricación por parte de uno de los proveedores comerciales para mejorar el rendimiento de los diodos. La caracterización microscópica y submicroscópica de regiones localizadas específicas dentro del semiconductor de silicio activo de los diodos rectificadores se realizó mediante estudios ex-situ y en condiciones de operación operando, lo que permitió la semicuantificación de los diferentes fenómenos que ocurren en condiciones de polarización directa, como las tensiones termoelásticas y la dinámica de los portadores, particularmente en las intercaras semiconductor/soldadura. Por lo tanto, esta tesis proporciona un análisis integral de los principales parámetros que afectan la fiabilidad de los diodos rectificadores de tipo press-fit para aplicaciones en automóviles. Los resultados destacan la importancia de la disipación térmica y subrayan la necesidad de optimizar los procesos de diseño y fabricación de los diodos para aumentar su vida útil. Estos conocimientos contribuirán al desarrollo de diodos press-fit más eficientes, mejorando así la fiabilidad de los sistemas de transformación mecánica a eléctrica dentro del campo de la automoción., Esta Tesis Doctoral ha sido realizada en el departamento de Electrocerámica del Instituto de Cerámica y Vidrio (ICV), Consejo Superior de Investigaciones Científicas (CSIC), y desarrollada en el marco del proyecto Functional Alternator Rectifier Diodes (FARDIO) financiado por la empresa SEG Automotive Germany, GmbH (Alemania). El desarrollo de este trabajo también fue posible gracias a los proyectos PID2021-124585NB-C33 y PID2020- 114192RB-C41 financiados por MCIN/AEI/10.13039/501100011033 y la ayuda RYC-2013-14436 financiada por MCIN/AEI/10.13039/501100011033 y RYC2021- 031236-I financiada por MCIN/AEI/10.13039/501100011033 y por la “Unión Europea NextGenerationEU/PRTR”. Se agradece también a The European Synchrotron Radiation Facility (The ESRF) y el CSIC por la financiación de los experimentos: A25-02-940, A25-02-997, A25- 02-1030, MA-5391 y A25-02-1074, así como al Centro de Microanálisis de Materiales (CMAM), de la Universidad Autónoma de Madrid (UAM) por la financiación de los experimentos IMP019/22 y IMP013/23., The publications included in this thesis are listed in: 1. A. Moure, A. Serrano, S. Román-Sánchez, I. Lorite, J. F. Fernández, Influence of the design on the thermal response of press-fit diodes: An infrared thermographic study, Results Phys. 22 (2021) 103909. https://doi.org/10.1016/j.rinp.2021.103909 2. A. Moure, S. Román-Sánchez, A. Serrano, I. Lorite, J. F. Fernández, In-situ thermal runaway of Si-based press-fit diodes monitored by infrared thermography, Results Phys. 19 (2020) 103529. https://doi.org/10.1016/j.rinp.2020.103529 3. S. Román-Sánchez, M. París Ogáyar, I. Lorite, J. F. Fernández, A. Serrano, A. Moure, Improving the reliability of silicon diodes via manufacturing process modification strategies, J. Mater. Res. Technol. 28 (2024) 3882-3891. https://doi.org/10.1016/j.jmrt.2023.12.155 4. S. Román-Sánchez, A. Serrano, A. del Campo, I. Lorite, J. F. Fernández, A. Moure, Thermal response of active Si in press-fit rectifier diodes by confocal Raman microscopy: Influence of diode design and technology, J. Mater. Res. Technol. 18 (2022) 2570-2581. https://doi.org/10.1016/j.jmrt.2022.03.116 5. S. Román-Sánchez, A. Moure, J. López-Sánchez, J. Rubio-Zuazo, A. del Campo, R. Calvo, I. Lorite, J. F. Fernández, A. Serrano, Structural impact in Si-based diodes with PNjunction technology under operating conditions, submitted. 6. S. Román-Sánchez, A. Moure, A. del Campo, I. Lorite, J. F. Fernández, A. Serrano, Assessment of thermo-mechanical phenomena in Si-based diodes via operando confocal Raman microscopy, Measurement. 229 (2024) 114425. https://doi.org/10.1016/j.measurement.2024.114425, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

[Dataset] Supplementary material. Flash sintering of potassium-sodium niobate-based piezoceramics: refining (micro)structure for properties enhancement

  • López-Blanco, Samuel
  • Rubio Marcos, Fernando
  • Barrón, Andrea
  • Ochoa, Diego A.
  • García, José E.
Supplementary material., S. L-B. thanks Agència de Gestió d’Ajuts Universitaris i de Recerca (AGAUR), Catalonia, Spain, for the FI-SDUR contract (2020 FISDU 00489). F. R-M. acknowledges the financial support from the Spanish Ministry of Science and Innovation through PID2020-114192RB-C41 and TED2021-130957B-C51 projects. F. R-M. is also indebted to Comunidad de Madrid for the financial support through the Doctorados Industriales project (IND2020/IND-17375), which is co-financed by the European Social Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Thermal response of active Si in press-fit rectifier diodes by confocal Raman microscopy: Influence of diode design and technology

  • Román-Sánchez, Sara
  • Serrano Rubio, Aída
  • Campo, Ángel Adolfo del
  • Lorite, Israel
  • Fernández Lozano, José Francisco
  • Moure Arroyo, Alberto
Overheating resulting from the circulation of high electric currents (in the order of tens of amperes) that some electronic devices undergo when they are in operation, can induce structural modifications such as mechanical stresses that could reduce their lifetime. In order to optimize their performance, understanding the phenomenology that takes place in devices at high-temperature regimen induced under operating conditions is fundamental. In this work, the thermal behavior of the Si-based semiconductor part of several press-fit rectifier diodes with different design and technology (Schottky, Metal Oxide Semiconductor and PN junction) has been studied by Confocal Raman Microscopy. The experiments have been performed on two specific functional parts of the active Si chip (i.e., near and far from the Si/electrode interface), discerning non-thermal effects such as stress and doping from the purely thermal ones with a specific analysis procedure of the Si T2g Raman active mode. This methodology enables an advance, non-destructive and located characterization of the thermal response of the diodes, which will help to optimize the performance of electronic devices and extend their useful life and reliability by avoiding or, at least, minimizing the damage caused by the temperature excess. © 2022 Elsevier B.V., All rights reserved., This work was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) under the project RTI2018-095303-A-C52 and PID2020-114192RB-C41. S.R.-S. acknowledges the financial support from FARDIO project to SEG Automotive Germany GmbH. A.S. acknowledges the financial support from the Comunidad de Madrid for an “Atracción de Talento Investigador” contract (No. 2017-t2/IND5395). Dr. A.M. is indebted to MINECO for a ‘Ramon y Cajal’ contract (ref: RYC-2013-14436), which is co-financed by the European Social Fund., Appendix A. Supplementary data The following is/are the supplementary data to this article DOI: https://doi.org/10.1016/j.jmrt.2022.03.116, Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Stress release-induced piezoresponse in lead-free piezoceramics with high-symmetry morphotropic phase boundary

  • Vendrell Villafruela, Xavier|||0000-0003-4705-8253
  • Rubio Marcos, Fernando
  • del Campo, Adolfo
  • Mestres, Lourdes
  • García García, José Eduardo|||0000-0002-1232-1739
The (1 - x)(Bi0.5Na0.5)TiO3-xBaTiO3 (BNT-BT) system has attracted a great deal of interest because it presents a morphotropic phase boundary (MPB) between the rhombohedral and tetragonal phases for 0.05 < x¿<¿0.08. Identifying the MPB in the BNT-BT system often results in materials exhibiting a high-symmetry (pseudo)cubic x-ray diffraction pattern. However, this singular composition exhibits ferroelectricity, which has been explained as a consequence of a field-induce phase transformation. Here, we demonstrate that the stress release after poling, from the virgin state of the sample, is a crucial phenomenon to obtain piezoelectric response in MPB BNT-BT. The mechanism behind the unusual poling–depoling process in piezoceramics exhibiting high-symmetry MPB is elucidated by combining x-ray diffraction measurements and advanced Raman spectroscopy. This underscores the importance of post-poling stress release from the virgin state as a critical factor in attaining piezoelectric response in lead-free piezoceramics with high-symmetry MPB configurations., This work was supported by the Spanish Ministry of Science and Innovation (Grant Nos. PID2020-114192RB-C41, TED2021-130957B-C51, and PID2023-153398OB-I00), funded by MICIU/AEI/10.13039/501100011033 and the European Social Fund Plus (FSE+). F. R-M. acknowledges financial support from Comunidad de Madrid through the Doctorados Industriales project (Grant No. IND2020/IND17375), co-funded by the European Social Fund. X.V., a Serra Húnter Fellow, expresses gratitude to the Generalitat de Catalunya for support through Project 2023 CLIMA 00009, Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Stress release-induced piezoresponse in lead-free piezoceramics with high-symmetry morphotropic phase boundary

  • Vendrell Villafruela, Xavier
  • Rubio Marcos, Fernando
  • del Campo, Adolfo
  • Mestres, Lourdes
  • García García, José Eduardo
The (1 - x)(Bi0.5Na0.5)TiO3-xBaTiO3 (BNT-BT) system has attracted a great deal of interest because it presents a morphotropic phase boundary (MPB) between the rhombohedral and tetragonal phases for 0.05 < x¿<¿0.08. Identifying the MPB in the BNT-BT system often results in materials exhibiting a high-symmetry (pseudo)cubic x-ray diffraction pattern. However, this singular composition exhibits ferroelectricity, which has been explained as a consequence of a field-induce phase transformation. Here, we demonstrate that the stress release after poling, from the virgin state of the sample, is a crucial phenomenon to obtain piezoelectric response in MPB BNT-BT. The mechanism behind the unusual poling–depoling process in piezoceramics exhibiting high-symmetry MPB is elucidated by combining x-ray diffraction measurements and advanced Raman spectroscopy. This underscores the importance of post-poling stress release from the virgin state as a critical factor in attaining piezoelectric response in lead-free piezoceramics with high-symmetry MPB configurations., This work was supported by the Spanish Ministry of Science and Innovation (Grant Nos. PID2020-114192RB-C41, TED2021-130957B-C51, and PID2023-153398OB-I00), funded by MICIU/AEI/10.13039/501100011033 and the European Social Fund Plus (FSE+). F. R-M. acknowledges financial support from Comunidad de Madrid through the Doctorados Industriales project (Grant No. IND2020/IND17375), co-funded by the European Social Fund. X.V., a Serra Húnter Fellow, expresses gratitude to the Generalitat de Catalunya for support through Project 2023 CLIMA 00009, Peer Reviewed, Postprint (published version)
Docta Complutense
Publication Artículo científico (JournalArticle)

Evaluation of low-toxic hybrid sol-gel coatings with organic pH-sensitive inhibitors for corrosion protection of AA2024 aluminium alloy

  • Jaldo Serrano, Eva
  • López Sánchez, Jesús
  • García Galván, Federico
  • Serrano, Aída
  • Rodríguez De La Fuente, Óscar
  • Barranco, Violeta
  • Galván, Juan Carlos
  • Carmona Tejero, Noemí
Today’s environmental needs require the reduction of the weight of vehicles, thus reducing fuel consumption and associated emissions. For this reason, the use of light alloys is being studied, which, due to their reactivity, must be protected before use. In this work, the effectiveness of a hybrid sol-gel coating doped with various organic environmentally friendly corrosion inhibitors applied to an AA2024 lightweight aluminium alloy is evaluated. Some of the inhibitors tested are pH indicators, acting as both corrosion inhibitors and optical sensors for the surface of the alloy. Samples are subjected to a corrosion test in a simulated saline environment and characterised before and after the test. The experimental results regarding their best inhibitor performance for their potential application in the transport industry are evaluated.
Docta Complutense
Publication Artículo científico (JournalArticle)

A feasible pathway to stabilize monoclinic and tetragonal phase coexistence in barium titanate-based ceramics

  • Necib, Jallouli
  • López Sánchez, Jesús
  • Rubio Marcos, Fernando
  • Serrano, Aída
  • Navarro Palma, Elena
  • Peña Moreno, Álvaro
  • Taoufik, Mnasri
  • Smari, Mourad
  • Rojas Hernández, Rocío Estefanía
  • Carmona Tejero, Noemí
  • Marín Palacios, María Pilar
Multiphase coexistence has attracted significant interest in recent years because its control has entailed a significant breakthrough for the piezoelectric activity enhancement of lead-free piezoelectric oxides. However, the comprehension of phase coexistence still has many controversies including an adequate synthesis process and/or the role played by crystalline phases in functional properties. In this study, functional barium titanate [BaTiO_(3), (BTO)]-based materials with tunable functional properties were obtained by compositional modification via Bismuth (Bi) doping. Towards this aim, we systematically synthesized BTO-based materials by a sol-gel method, focusing on the control of Bi substitution in the BaTiO_(3) structure. In particular, we found that the substitution of Bi^(+3) leads to the stabilization of a monoclinic-tetragonal (M-T) phase boundary close to room temperature, which facilities the polarization process of the system. As a surprising result, we believe that the simple and cost-effective strategy and design principles described in this work open up the possibility of obtaining BTO-based lead-free ceramics with enhanced properties induced by the stabilization of the phase coexistence, expanding their application range.