Skip to main content

CONTROL OPTICO REVERSIBLE DE LA CONFIGURACION DE DOMINIOS EN MATERIALES FERROELECTRICOS: EFECTOS FOTODETECTOR Y FOTOACTUADOR.

PGC2018-099158-B-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de Generación de Conocimiento y Fortalecimiento Científico y Tecnológico del Sistema de I+D+i
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2018
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Fine-grained high-performance Ba0.85Ca0.15 Zr0.1Ti0.9O3 piezoceramics obtained by current-controlled flash sintering of nanopowders

  • López-Blanco, Samuel
  • Ochoa, Diego A.
  • Amorín, Harvey
  • Castro, Alicia
  • Algueró, Miguel
  • García, José E.
[EN] Due to environmental concerns, extensive research has been carried out to develop high-performance lead-free piezoceramics capable of replacing commercial lead-based materials. The lead-free (BaCa)TiO −Ba(ZrTi)O system has emerged as a candidate for room temperature transducer applications because a high piezoelectric charge coefficient is achieved in this system for compositions at the morphotropic phase boundary. However, conventional ceramic processing of these eco-friendly piezoceramics demands high energy consumption because long-lasting, high-temperature heat treatments are needed, which often lead to microstructural degradation that compromises the material reliability. Field-assisted flash sintering has started to be explored since the application of an adequate electric field was shown to significantly reduce the sintering time and temperature, thereby controlling grain growth. In this work, BaCaZrTiO ceramics are obtained by current-controlled flash sintering of mechanosynthesized nanopowders. Exhaustive control of the sintering parameters allows tailoring of the microstructure, which allows dense fine-grained flash-sintered ceramics exhibiting a high electric field-induced strain response to be obtained., This work was supported by the Agencia Estatal de Investigación (AEI), Spain, projects PGC2018-099158-B-I00 and PID2021–122708OB-C33. S. L-B. thanks Agència de Gestió d′Ajuts Universitaris i de Recerca (AGAUR), Catalonia, Spain, for the FI-SDUR contract (2020 FISDU 00489)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Light-induced strain and its correlation with the optical absorption at charged domain walls in polycrystalline ferroelectrics

  • Rubio Marcos, Fernando
  • Pamies, Paula
  • Campo, Ángel Adolfo del
  • Tiana, Jordi
  • Ordoñez-Pimentel, Jonathan
  • Venet, Michel
  • Rojas-Hernández, Rocío E.
  • Ochoa, Diego A.
  • Fernández Lozano, José Francisco
  • José E. García
[EN] Photostrictive materials have a growing interest because of their great potential as light-driven actuators, among other optomechanical applications. In this context, the optical control of macroscopic strain in ferroelectrics has recently attracted remarkable attention as an effective alternative to the conventional electric control of strain. Here, a clear correlation between optical absorption and light-induced strain in polycrystalline BaTiO is shown. Specifically, the grain size and the sample thickness dependence of optical absorption when the material is irradiated with energy photons lower than the band gap evidence that light absorption at charged domain walls is the core of the observed photo-response in ferroelectrics. The photoinduced electronic reconstruction phenomenon is proposed as the primary physical mechanism for light absorption at charged domain walls. Results open a new pathway to designing ferroelectric-based devices with new functionalities like thickness gradient-based photo-controlled nanoactuators., This work is supported by the AEI (Spanish Government) projects PGC2018-099158-B-I00 and PID2020-114192RB-C41. M.V. acknowledges support from the São Paulo Research Foundation FAPESP (grant number 2022/08030-5) and the Brazilian CNPq (process 304144/2021-5). J.E.G. wishes to thank the Becas Iberoamérica Santander Investigación 2020–2021 program for their financial support. F.R-M. is indebted to Comunidad de Madrid for the financial support through the Doctorados Industriales project (IND2020/IND-17375), which is co-financed by the European Social Fund., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Particle size effect on the microstructure and the aging process of flash-sintered barium titanate from micro and nanopowders

  • López Blanco, Samuel|||0000-0003-0591-3100
  • Vendrell Vilafruella, Xavier
  • Mestres Vila, Lourdes
  • Ochoa Guerrero, Diego A.|||0000-0002-8756-9704
  • García García, José Eduardo|||0000-0002-1232-1739
Flash sintering is a novel sintering technique that allows high-density ceramics to be obtained at low temperatures and using short dwell times, thus providing an energy-efficient alternative to conventional sintering. The microstructure of flash-sintered samples can be fine-tuned by a proper control of electrical parameters such as current density, electric field, and current profile, yielding significant improvements of functional properties. The starting powder should also be carefully selected since better sintering results are reported for smaller green grain sizes. However, this work evidences time evolution of electrical properties of flash-sintered BaTiO3 ceramics from submicron powders. The results reveal that these transformations greatly depend on powder grain size and can be further adjusted with an adequate selection of electric power profiles. This work provides new insights into ongoing phenomena during field-assisted sintering, such as grain growth and defect formation dynamics. Although the results focus on BaTiO3, it offers a new pathway to tailor the microstructure of flash-sintered ceramics, which may be extended to other electronic materials., This work was supported by the Agencia Estatal de Investigación (AEI), Spain, project PGC2018-099158-B-I00. S. L-B. thanks Agència de Gestió dAjuts Universitaris i de Recerca (AGAUR), Catalonia, Spain, for the FI-SDUR contract (2020 FISDU 00489). The authors acknowledge the ESRF (The European Synchrotron) for provision of synchrotron radiation facilities, and we would like to thank the SpLine-BM25 staff for assistance in using the beamline., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Fine-grained high-performance Ba0.85Ca0.15 Zr0.1Ti0.9O3 piezoceramics obtained by current-controlled flash sintering of nanopowders

  • López Blanco, Samuel|||0000-0003-0591-3100
  • Ochoa Guerrero, Diego A.|||0000-0002-8756-9704
  • Amorín, Harvey
  • Castro, Alicia
  • Algueró, Miguel
  • García García, José Eduardo|||0000-0002-1232-1739
Due to environmental concerns, extensive research has been carried out to develop high-performance lead-free piezoceramics capable of replacing commercial lead-based materials. The lead-free (Ba0.7Ca0.3)TiO3 -Ba(Zr0.2Ti0.8)O3 system has emerged as a candidate for room temperature transducer applications because a high piezoelectric charge coefficient is achieved in this system for compositions at the morphotropic phase boundary. However, conventional ceramic processing of these eco-friendly piezoceramics demands high energy consumption because long-lasting, high-temperature heat treatments are needed, which often lead to microstructural degradation that compromises the material reliability. Field-assisted flash sintering has started to be explored since the application of an adequate electric field was shown to significantly reduce the sintering time and temperature, thereby controlling grain growth. In this work, Ba0.85Ca0.15Zr0.1Ti0.9O3 ceramics are obtained by current-controlled flash sintering of mechanosynthesized nanopowders. Exhaustive control of the sintering parameters allows tailoring of the microstructure, which allows dense fine-grained flash-sintered ceramics exhibiting a high electric field-induced strain response to be obtained., This work was supported by the Agencia Estatal de Investigación (AEI), Spain, projects PGC2018-099158-B-I00 and PID2021–122708OB-C33. S. L-B. thanks Agència de Gestió d′Ajuts Universitaris i de Recerca (AGAUR), Catalonia, Spain, for the FI-SDUR contract (2020 FISDU 00489). The authors acknowledge the ESRF (The European Synchrotron) for provision of synchrotron radiation facilities, and we would like to thank the BM25 (SpLine) staff for assistance in using the beamline., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Particle size effect on the microstructure and the aging process of flash-sintered barium titanate from micro and nanopowders

  • López Blanco, Samuel
  • Vendrell Vilafruella, Xavier
  • Mestres Vila, Lourdes
  • Ochoa Guerrero, Diego A.
  • García García, José Eduardo
Flash sintering is a novel sintering technique that allows high-density ceramics to be obtained at low temperatures and using short dwell times, thus providing an energy-efficient alternative to conventional sintering. The microstructure of flash-sintered samples can be fine-tuned by a proper control of electrical parameters such as current density, electric field, and current profile, yielding significant improvements of functional properties. The starting powder should also be carefully selected since better sintering results are reported for smaller green grain sizes. However, this work evidences time evolution of electrical properties of flash-sintered BaTiO3 ceramics from submicron powders. The results reveal that these transformations greatly depend on powder grain size and can be further adjusted with an adequate selection of electric power profiles. This work provides new insights into ongoing phenomena during field-assisted sintering, such as grain growth and defect formation dynamics. Although the results focus on BaTiO3, it offers a new pathway to tailor the microstructure of flash-sintered ceramics, which may be extended to other electronic materials., This work was supported by the Agencia Estatal de Investigación (AEI), Spain, project PGC2018-099158-B-I00. S. L-B. thanks Agència de Gestió dAjuts Universitaris i de Recerca (AGAUR), Catalonia, Spain, for the FI-SDUR contract (2020 FISDU 00489). The authors acknowledge the ESRF (The European Synchrotron) for provision of synchrotron radiation facilities, and we would like to thank the SpLine-BM25 staff for assistance in using the beamline., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Fine-grained high-performance Ba0.85Ca0.15 Zr0.1Ti0.9O3 piezoceramics obtained by current-controlled flash sintering of nanopowders

  • López Blanco, Samuel
  • Ochoa Guerrero, Diego A.
  • Amorín, Harvey
  • Castro, Alicia
  • Algueró, Miguel
  • García García, José Eduardo
Due to environmental concerns, extensive research has been carried out to develop high-performance lead-free piezoceramics capable of replacing commercial lead-based materials. The lead-free (Ba0.7Ca0.3)TiO3 -Ba(Zr0.2Ti0.8)O3 system has emerged as a candidate for room temperature transducer applications because a high piezoelectric charge coefficient is achieved in this system for compositions at the morphotropic phase boundary. However, conventional ceramic processing of these eco-friendly piezoceramics demands high energy consumption because long-lasting, high-temperature heat treatments are needed, which often lead to microstructural degradation that compromises the material reliability. Field-assisted flash sintering has started to be explored since the application of an adequate electric field was shown to significantly reduce the sintering time and temperature, thereby controlling grain growth. In this work, Ba0.85Ca0.15Zr0.1Ti0.9O3 ceramics are obtained by current-controlled flash sintering of mechanosynthesized nanopowders. Exhaustive control of the sintering parameters allows tailoring of the microstructure, which allows dense fine-grained flash-sintered ceramics exhibiting a high electric field-induced strain response to be obtained., This work was supported by the Agencia Estatal de Investigación (AEI), Spain, projects PGC2018-099158-B-I00 and PID2021–122708OB-C33. S. L-B. thanks Agència de Gestió d′Ajuts Universitaris i de Recerca (AGAUR), Catalonia, Spain, for the FI-SDUR contract (2020 FISDU 00489). The authors acknowledge the ESRF (The European Synchrotron) for provision of synchrotron radiation facilities, and we would like to thank the BM25 (SpLine) staff for assistance in using the beamline., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Tailoring the microstructure by a proper electric current control in flash sintering: The case of barium titanate

  • López Blanco, Samuel
  • Ochoa Guerrero, Diego A.
  • Vendrell Vilafruella, Xavier
  • Mestres, Lourdes
  • García García, José Eduardo
Flash sintering is arousing growing interest because high-density ceramics can be obtained at lower temperatures and shorter dwell times than conventional sintering. However, not only temperature and dwell times should be controlled during flash sintering but also parameters such as the electric field and electric current should be considered. Controlling all the parameters during the processing allows comprehensive control of the microstructure and, consequently, functional properties can be improved. In this work, it is evidenced that an exhaustive control of the flash electric current is a crucial factor for tailoring the microstructure of BaTiO3 ceramics. The results reveal that the most suitable way to control the sintering process is by using non-linear current profiles because better densification and improved grain growth is achieved. Although the results focus on BaTiO3, this work offers a new pathway to tailor the microstructure of flash sintered ceramics, which may be extended to other materials., Peer Reviewed, Postprint (published version)