Skip to main content

DISEÑO DE ECO-RECUBRIMIENTOS CON RESPUESTA INTELIGENTE PARA PROTECCION FRENTE A LA CORROSION DE ALEACIONES LIGERAS Y SUPERCONDENSADORES.

PID2019-104717RB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Understanding the rate performance of microporous carbons in aqueous electrolytes

  • Aldama, Ivan
  • Lillo-Rodenas, Maria Angeles
  • Kunowsky, Mirko
  • Ibañez, Joaquin
  • Rojo, José M.
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
Variation of specific capacitance versus current density is studied for microporous carbons. Although literature states that capacitance retention is higher for macro/mesoporous than for microporous carbons, the results reported here show that high capacitance retention can be reached for microporous carbons in combination with aqueous electrolytes (2M H2SO4, 1M KOH and 6M KOH). Six carbon monoliths are studied; three pristine ones and those three heat-treated, so as to reduce their content of surface oxygen groups and develops porosity. The capacitance retention is analyzed based on five parameters: electronic conductivity, surface chemistry and porosity of the monoliths, ionic conductivity and type of electrolyte. The capacitance retention is higher for the monoliths working as negative (H3O+ and K+) electrodes than as positive (HSO4− and OH−) ones, being these results of interest for the use of carbon monoliths in asymmetric and hybrid supercapacitors. The highest capacitance retention is obtained by combining (i) monolith electronic conductivity of 11–14 Scm−1 and micropore size of 0.6–0.8 nm for H3O+, K+ and HSO4−, and of 0.85–0.95 nm for OH−; (ii) electrolyte ionic conductivity above 600 mScm−1 and 6M KOH electrolyte, since this electrolyte performs better than 2M H2SO4 and 1M KOH.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Understanding the rate performance of microporous carbons in aqueous electrolytes

  • Aldama, I.
  • Lillo-Ródenas, Maria Ángeles
  • Kunowsky, M.
  • Ibáñez, Joaquín
  • Rojo, J. M.
Variation of specific capacitance versus current density is studied for microporous carbons. Although literature states that capacitance retention is higher for macro/mesoporous than for microporous carbons, the results reported here show that high capacitance retention can be reached for microporous carbons in combination with aqueous electrolytes (2M HSO, 1M KOH and 6M KOH). Six carbon monoliths are studied; three pristine ones and those three heat-treated, so as to reduce their content of surface oxygen groups and develops porosity. The capacitance retention is analyzed based on five parameters: electronic conductivity, surface chemistry and porosity of the monoliths, ionic conductivity and type of electrolyte. The capacitance retention is higher for the monoliths working as negative (HO and K) electrodes than as positive (HSO and OH) ones, being these results of interest for the use of carbon monoliths in asymmetric and hybrid supercapacitors. The highest capacitance retention is obtained by combining (i) monolith electronic conductivity of 11–14 Scm and micropore size of 0.6–0.8 nm for HO, K and HSO , and of 0.85–0.95 nm for OH; (ii) electrolyte ionic conductivity above 600 mScm and 6M KOH electrolyte, since this electrolyte performs better than 2M HSO and 1M KOH., Authors thank Prof. A. Linares-Solano, now retired, for providing the pristine carbon monoliths and for helpful discussions about carbon materials. Authors also thank Prof. G.Z. Chen from Univ. Nottingham (UK) for helpful discussions about OCP and PZC. Javier Toro and Edurne Laurín are acknowledged for technical assistance of electrochemical and SEM measurements, respectively. Funding through the PID2019-104717RB-I00 project is acknowledged to Spanish MICINN.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Controlled rate thermal analysis (CRTA) as a fast and effective method for the development of ceramic powders of synthetic hydroxyapatite at low temperatures

  • Peón, Eduardo
  • Fuentes, Gastón
  • Galván Sierra, Juan Carlos
One of the main limitations for applying synthetic hydroxyapatite as a filler in cement and other formulations in orthopedic surgery is its morphology. The present work shows the obtaining of synthetic hydroxyapatite powders at low temperatures such as 300 and 850ºC using the Controlled Rate Thermal Analysis (CRTA) technique. The powders obtained were characterized by IR spectroscopy and X-ray diffraction, showing that the phase formed corresponds to crystalline hydroxyapatite. The specific surface area values determined are between 17 and 66 m/g with a pore size between 50-300 Å. The transformation of phases in the synthetic hydroxyapatite is studied by Dynamic Thermogravimetric Analysis and CRTA techniques, allowing the kinetic calculations of the transformation using two methods of data processing, determining the activation energy (Ea), pre-exponential factor (A), and model kinetic most likely in each stage. The results show the effectiveness and usefulness of the CRTA technique for preparing synthetic hydroxyapatite powders with different specific surface areas, which makes this technique attractive for medical purposes., This work has been supported by the Spanish Ministry of Science and Innovation (PID2019-104717RB-I00 Project) and the project entitled “Preparation and characterization of hydroxyapatite with controlled textural characteristics” financed by the Expert Fund Programmes by the Spanish of the Spanish Agency for International Development Cooperation (AECID). We thankfully acknowledge Dr. Prof. Eduardo Ruiz Hitzky for assistance with the CRTA equipment.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hybrid Sol-Gel Coatings Doped with Non-Toxic Corrosion Inhibitors for Corrosion Protection on AZ61 Magnesium Alloy

  • Rodríguez-Alonso, L.
  • López-Sánchez, Jesús
  • Serrano Rubio, Aída
  • Rodríguez de la Fuente, Óscar
  • Galván Sierra, Juan Carlos
  • Carmona, N.
Physiological human fluid is a natural corrosive environment and can lead to serious corrosion and mechanical damages to light Mg–Al alloys used in prosthetics for biomedical applications. In this work, organic–inorganic hybrid coatings doped with various environmentally friendly and non-toxic corrosion inhibitors have been prepared by the sol-gel process for the corrosion protection of AZ61 magnesium alloys. Effectiveness has been evaluated by pH measurements, optical microscopy, and SEM during a standard corrosion test in a Hanks’ Balanced Salt Solution. The results showed that the addition of an inhibitor to the sol-gel coating can improve significantly the corrosion performance, being an excellent barrier for the L-cysteine-doped hybrid sol-gel films. The incorporation of TiO nanoparticles, 2-Aminopyridine and quinine organic molecules slowed down the corrosion rate of the Mg–Al alloy. Graphene oxide seemed to have the same response to corrosion as the hybrid sol-gel coating without inhibitors., The authors acknowledge the Spanish Ministry of Science and Innovation for financing the projects RTI2018-095856-B-C21 (AEI/FEDER; PIE: 2021-60-E-030, PIE: 2010-6-OE-013, and PID2019-104717RB-I00). A.S. acknowledges the financial support from the Comunidad de Madrid for an “Atracción de Talento Investigador” contract (no. 2017-t2/IND5395).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A combined micro-Raman, X-ray absorption and magnetic study to follow the glycerol-assisted growth of epsilon-iron oxide sol-gel coatings

  • López-Sánchez, Jesús
  • Serrano Rubio, Aída
  • Campo, Ángel Adolfo del
  • Muñoz-Noval, A.
  • Salas, Eduardo
  • Cabero, Mariona
  • Varela, María
  • Abuín, Manuel
  • Castro, Germán R.
  • Rubio-Zuazo, J.
  • Rodríguez de la Fuente, Óscar
  • Carmona, N.
[EN] Epsilon iron oxide (ε-FeO) coatings on Si(100) substrates are obtained by an easy one-pot sol-gel recipe assisted by glycerol in an acid medium. Glycerol, given its small dimensions, enables the formation of ε-FeO nanoparticles with a size of a few nanometers and the highest purity is reached in coatings after a densification treatment at 960 °C. The structural and compositional evolution up to 1200 °C is studied by confocal Raman microscopy and X-ray absorption spectroscopy techniques, correlating the existing magnetic properties. We report a novel characterization method, which allows monitoring the evolution of the precursor micelles as well as the intermediate and final phases formed. Furthermore, the inherent industrial technology transfer of the sol-gel process is also demonstrated with the ε-FeO polymorph, impelling its application in the coatings form., This work has been supported by the Ministerio de Ciencia e Innovación (MCINN, Spain) through the projects PIE: 2021-60-E-030, PIE: 2010-6-OE-013, PID2019-104717RB-I00 (2020–2022), MAT2017-86540-C4-1-R, RTI2018-095856-B-C21 (2019–2021), RTI2018-097895-B-C43 and RTI2018-095303-A-C52. The authors are grateful to The ESRF (France), MCINN and Consejo Superior de Investigaciones Científicas (CSIC, Spain) for the provision of synchrotron radiation facilities and to the BM25-SpLine Staff for their valuable help. A.S.and A.M.-N acknowledge financial support from Comunidad de Madrid (Spain) for an “Atracción de Talento Investigador” Contract 2017-t2/IND5395 and 2018-T1/IND-10360, respectively
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Evaluation of Low-Toxic Hybrid Sol-Gel Coatings with Organic pH-Sensitive Inhibitors for Corrosion Protection of AA2024 Aluminium Alloy

  • Jaldo Serrano, Eva
  • López-Sánchez, Jesús
  • García Galván, Federico
  • Serrano Rubio, Aída
  • Rodríguez de la Fuente, Óscar
  • Barranco, Violeta
  • Galván Sierra, Juan Carlos
  • Carmona, N.
Today’s environmental needs require the reduction of the weight of vehicles, thus reducing fuel consumption and associated emissions. For this reason, the use of light alloys is being studied, which, due to their reactivity, must be protected before use. In this work, the effectiveness of a hybrid sol-gel coating doped with various organic environmentally friendly corrosion inhibitors applied to an AA2024 lightweight aluminium alloy is evaluated. Some of the inhibitors tested are pH indicators, acting as both corrosion inhibitors and optical sensors for the surface of the alloy. Samples are subjected to a corrosion test in a simulated saline environment and characterised before and after the test. The experimental results regarding their best inhibitor performance for their potential application in the transport industry are evaluated., This research was funded by the Spanish Ministry of Science and Innovation (MICINN) for financing the projects RTI2018-095856-B-C21; and by the Spanish Ministry of Economic Affairs and Digital Transformation (MINECO) through the projects PID2020-114192RB-C41, PID2019-104717RB-I00 and PID2021-122980OB-C51. A.S. acknowledges the financial support from MCIN for a “Ramón y Cajal” contract RYC2021-031236-I., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Corrosion control by autonomous self-healing epoxy coatings based on superabsorbent healing agents

  • Peñas-Caballero, Mónica
  • Martín Cordón, Jesús
  • Barranco, Violeta
  • Galván Sierra, Juan Carlos
  • Hernández, Marianella
  • López-Manchado, Miguel A.
  • Verdejo, Raquel
Metallic corrosion is an all-time dangerous and extremely expensive problem. Here, we present an autonomous self-healing polymer coating based on an epoxy resin and superabsorbent polymer (SAP) blend as an anticorrosion coating. Tailor-made coatings were manufactured by controlling the location of the SAP on the surface, middle, and bottom of the coating. The corrosion behavior and self-healing process of the coatings were analyzed at the macro, micro, and sub-micro scales using Electrochemical Impedance Spectroscopy (EIS). The SAP preferentially located at the bottom showed coating resistance values higher than 1 × 10 Ωcm over 10 days of immersion with 3-point defects. This configuration provided the best anticorrosion performance, preventing coating delamination, and protecting the metal from corrosion after surface damage, indicating better barrier properties. The SAP enabled local repair of the crack when in contact with water, minimizing the diffusion of oxygen and electroactive species, which are responsible for the corrosion of a metal., This research was funded by the Spanish Research Agency, grant numbers PID2019-107501RB-I00/AEI/10.13039/501100011033, and RYC-2017-22837. MPC acknowledges grant BES-2017-079899 funded by MCIN/AEI/10.13039/501100011033. VB would like to acknowledge financial support through the PID2019-104717RB-I00 project from the Spanish Ministry of Science and Innovation (MICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Eco-Friendly Sol–Gel Coatings with Organic Corrosion Inhibitors for Lightweight AZ61 Alloy

  • Domínguez-Martínez, Jorge
  • López-Sánchez, Jesús
  • García Galván, Federico
  • Serrano Rubio, Aída
  • Barranco, Violeta
  • Galván Sierra, Juan Carlos
  • Rodríguez de la Fuente, Óscar
  • Carmona, N.
© 2024 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/)., The latest advances in technology and materials science have catalyzed a transformative shift towards the adoption of environmentally conscious and lightweight materials across key sectors such as aeronautics, biomedical, and automotive industries. Noteworthy among these innovations are the magnesium-aluminum (Mg-Al) alloys employed in aeronautical applications, contributing to the overall reduction in aircraft weight and subsequently diminishing fuel consumption and mitigating atmospheric emissions. The present work delves into a study of the anti-corrosive properties inherent in various sol-gel coatings, leveraging a range of environmentally friendly corrosion inhibitors, specifically tailored for samples of the AZ61 alloy. Methodologically, the work involves the synthesis and application of sol-gel coatings on AZ61 alloy containing eco-friendly inhibitors: L-cysteine, N-acetyl-cysteine, curcumin and methylene blue. Subsequently, an accelerated corrosion test in a simulated saline environment is performed. Through microstructural and compositional analyses, the best inhibitors responses are achieved with inhibitors containing S, N heteroatoms and conjugated double bonds in their structure, probably due to the creation of a continuous MgCl2 layer. This research contributes to the ongoing discourse on protective eco-coatings, aligning with the broader paradigm shift towards sustainable and lightweight materials in key industries., This research was funded by the Ministry of Science and Innovation (MCINN, Spain) through the Project PID2019-104717RB-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

(Invited) Multiscale Electrochemical Analysis of Sol-Gel Films Modified with Eco-Friendly Corrosion Inhibitors for Active Corrosion Protection of AZ61 Magnesium Alloy

  • García Galván, Federico
  • Martín Cordón, Jesús
  • Carmona, Noemí
  • Llorente, Irene
  • Fajardo, Santiago
  • Feliú Jr., S.
  • Galván Sierra, Juan Carlos
  • Barranco, Violeta
Extended abstracts of a technical paper., The use of magnesium and its alloys has increased in recent years due to their low weight, high strength, excellent machinability, and high dimensional durability. Therefore, they have found applications in communications, automotive and aerospace industries, among others. However, their high negative reduction potentials, low chemical stability, and unstable native oxide films have limited their use, particularly in applications that require high corrosion resistance.1-3 The application of sol-gel coatings has shown to be an effective method to overcome this problem. In this context, this study aimed to develop sol-gel thin films doped with ecological corrosion inhibitors for corrosion protection of AZ61 alloy surfaces. The objective was to determine whether these new systems could provide an alternative to the replacement of chromates, surface pre-treatments and chemical conversion coatings that contain conventional corrosion inhibitors, which are currently being questioned for their harmfulness to health and the environment.4 Methyltriethoxysilane (MTEOS) and tetraethylorthosilicate (TEOS) were used as precursors to produce sols, which were then modified with active corrosion protection dopants. Eco-benign corrosion inhibitors, such as L-cysteine (L-Cys), lanthanum (III) acetate hydrate, and lanthanum (III) isopropoxide were incorporated in the sol-gel matrix as dopants. A set of sol-gel coatings was modified with a common dopant, benzotriazole (BTA), for comparison purposes, as it is a well-known effective corrosion inhibitor. However, this chemical compound is known to be carcinogenic and toxic to flora and fauna, and its use is currently being restricted today in compliance with environmental protection regulations.5,6 The resulting sols were processed and deposited on AZ61 substrates by dip-coating technique, producing transparent sol-gel thin-films. The thickness of the films was evaluated by interference of reflection spectra. Their chemical composition was characterized by X-ray fluorescence (XRF), while surface chemical composition and oxidation state of elements present at the outermost surface nanolayers was also analysed by X-ray photoelectron spectroscopy (XPS). The structural and thermal characterization of the doped thin-films were respectively analysed by Fourier transformed infrared spectroscopy (FTIR) and thermogravimetry and differential thermal analysis (TG/DTA). The corrosion protection behaviour of the sol-gel coatings during immersion tests in 0.006 M and 0.6 M NaCl aqueous solutions was studied using a multiscale electrochemical approach. Global electrochemical impedance spectroscopy (EIS) was used for macroscopic scale characterisation. Localised electrochemical impedance spectroscopy (LEIS and LEIM) was used for the characterisation at micro- and sub-microscopic scales using an electrochemical minicell system and a scanning electrochemical workstation. The texture and microstructure of coated samples before and after corrosion tests were observed by optical and scanning electron microscopies (OM and SEM), while topography and coating roughness were analysed by atomic force microscopy (AFM). In terms of corrosion resistance, similar results were obtained with sol-gel thin-films doped with lanthanum acetate or lanthanum isopropoxide. The synthesis method of the acetate-doped gels is much simpler and cheaper, so from a practical standpoint, these sol-gel thin-films could be more interesting. On the other hand, highly satisfactory results were obtained with gels doped with non-toxic L-Cys compared with those doped with BTA. Finally, it is noteworthy that an interesting synergistic effect was observed in the corrosion protection of the AZ61 alloy in sol-gel coatings that were doped with metal-organic inhibitors and loaded with organic inhibitors (L-Cys or BTA). As a concluding remark, this study has provided an effective and environmentally friendly solution for the active corrosion protection of the AZ61 alloy. Sol-gel thin films doped with eco-friendly corrosion inhibitors have showed promising results in extending the durability of AZ61 alloy while being sustainable. The multiscale electrochemical approach used has provided a comprehensive understanding of the active corrosion protection behaviour and the self-healing properties of sol-gel coatings, which can be extended to other materials and systems., Spanish Ministry of Science and Innovation (MCINN, Spain). Project PID2019-104717RB-I00, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

New electrochemical method for the determination of the barrier properties of corrosion protective coatings

  • Trujillo, S.
  • Reyes-Riverol, R.
  • García-Galván, F. R.
  • Fajardo, Santiago
A novel electrochemical method evaluates the durability of corrosion protective coatings by measuring the galvanic current between a coated AZ31 Mg alloy and a Pt auxiliary electrode in a 2 M NaCl solution. In this work an organo-inorganic sol-gel film was used. The durability criterion, t, was selected as the time where the galvanic current reached 1 mA. Validated using EIS, the method showed 82 % accuracy. However, this difference was not deemed statistically significant. Under the conditions used in this study, results from the new method align with traditional EIS, establishing its viability as a simple and straightforward tool for assessing the barrier properties of corrosion protective coatings., SF acknowledges the financial support under the Grant RYC2019-027006-I funded by MCIN/AEI/10.13039/501100011033 and by ting in you“ESF Invesr future”, and the Project PID2021-126166OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” (European Union). SF and RRR thank the CSIC for the financial support under the project PIE-20216AT012. FRGG acknowledges financial support through the PID2019-104717RB-I00 project from the Spanish Ministry of Science and Innovation (MICI). V. Barranco and J.C. Galvan are acknowledged for their valuable comments during the preparation of this paper.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tailored 3D Foams Decorated with Nanostructured Manganese Oxide for Asymmetric Electrochemical Capacitors

  • Siwek, K. I.
  • Eugenio, S.
  • Aldama, I.
  • Rojo, J. M.
  • Amarilla, José Manuel
  • Ribeiro, A. P.C.
  • Silva, T. M.
  • Montemor, M. F.
Tailored 3D (Ni and NiCo) metallic foam architectures were produced by electrodeposition and decorated via electrochemical routes with manganese oxide (MnOx) to serve as positive electrodes for supercapacitors. For comparative purposes, an electrode made of commercial Ni foam was also prepared. The foam-based electrodes were paired with a carbon cloth electrode and used to assemble asymmetric electrochemical cells. The electrochemical response of these cells was studied by applying different electrochemical techniques. In addition, two different protocols (cycling and floating) were applied to assess cells durability and fade. Despite the significant differences in the decorated foams morphology and structure their electrochemical responses revealed similar trends. The electrodes made of tailored foams showed higher specific capacitance, better capacitance retention at high current load and enhanced cycling stability compared to the electrodes made of commercial foam. The asymmetric cells made with the tailored foams revealed higher (maximum) specific energy (11 14 Wh kg?1) and specific power (1.3 1.4 104 W kg?1) compared to cells assembled with commercial foams (8.4 Wh kg?1 and 6.3 103 W kg?1). The durability tests evidenced that corrosion of the NiCo electrodeposited foams and electrochemical dissolution of MnOx are possible causes of cells degradation., The authors would like to thank Fundação para a Ciência e a Tecnologia (FCT, Portugal) for financial support under the projects PTDC/QUI-ELT/28299/2017, UIDB/00100/2020, M-ERA-NET/0004/ 2014- and the grant SFRH/BD/123963/2016. Authors from Portugal acknowledge the financial support of the project Baterias 2030, with the reference LISBOA-01-0247-FEDER-046109, co-funded by Operational Programme for Competitiveness and Internationalisation (COMPETE 2020), under the Portugal 2020 Partnership Agreement, through the European Regional Development Fund (ERDF)’. The projects M-ERANET/ 0004/2014-PCIN2015-024 and PID2019-104717RB-I00, funded by the Spanish MINECO and MICINN, respectively are acknowledged. Authors also thank C. P. Moreira de Sá (CEMUP, Univ. Porto) for XPS measurements. This article is a result of the project Baterias 2030, supported by Operational Programme for Competitiveness and Internationalisation (COMPETE 2020), under the Portugal 2020 Partnership Agreement, through the European Regional Development Fund (ERDF)’., Peer reviewed
Docta Complutense
Publication Artículo científico (JournalArticle)

Evaluation of low-toxic hybrid sol-gel coatings with organic pH-sensitive inhibitors for corrosion protection of AA2024 aluminium alloy

  • Jaldo Serrano, Eva
  • López Sánchez, Jesús
  • García Galván, Federico
  • Serrano, Aída
  • Rodríguez De La Fuente, Óscar
  • Barranco, Violeta
  • Galván, Juan Carlos
  • Carmona Tejero, Noemí
Today’s environmental needs require the reduction of the weight of vehicles, thus reducing fuel consumption and associated emissions. For this reason, the use of light alloys is being studied, which, due to their reactivity, must be protected before use. In this work, the effectiveness of a hybrid sol-gel coating doped with various organic environmentally friendly corrosion inhibitors applied to an AA2024 lightweight aluminium alloy is evaluated. Some of the inhibitors tested are pH indicators, acting as both corrosion inhibitors and optical sensors for the surface of the alloy. Samples are subjected to a corrosion test in a simulated saline environment and characterised before and after the test. The experimental results regarding their best inhibitor performance for their potential application in the transport industry are evaluated.