Skip to main content

ESTRATEGIAS DE BAJO COSTE EN LA PRODUCCION DE BIOACEITES PIROLITICOS DE ALTA CALIDAD COMO VECTOR ENERGETICO

BES-2016-077750

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprogram Subprograma Estatal de Formación
Call Contratos Predoctorales
Call year 2016
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A pyrolysis process coupled to a catalytic cracking stage: A potential waste-to-energy solution for mattress foam waste

  • Veses Roda, Alberto
  • Sanahuja-Parejo, Olga
  • Martínez Berges, Isabel
  • Callén Romero, M. Soledad
  • López Sebastián, José Manuel
  • García Martínez, Tomás
  • Murillo Villuendas, Ramón
3 figures, 5 tables.-- Supplementary information available.-- © 2020. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Pyrolysis coupled to either thermal or catalytic cracking of mattress foam waste was performed in a laboratory-scale facility consisting of a fixed-bed reactor joined to a tubular cracking reactor. The results showed a great potential for the production of syngas specially at high cracking temperatures. Particularly, fixing 800 °C in the cracking reactor, a CO and CH4 rich gas with a remarkable amount of H2 was obtained. The addition of catalysts (dolomite, olivine or HiFUEL®) significantly decreased undesirable tar formation, (below 10 wt%), simultaneously increasing the gas yield and keeping CO and CH4 as the main components in the stream, becoming a preferable route that the non-catalytic process. Accordingly, this stream could be used preferably for further applications in energy generation because its heating value ranged between 15.7 MJ/Nm3 and 19.6 MJ/Nm3. In particular, the gas obtained by the use of dolomite could be advantageous for the production of organic compounds such as dimethyl ether (DME) as well as its use an engine or boiler to generate electricity in small facilities. In addition, the solid fraction obtained after de process could be used as a medium quality refused derived fuel (LHV ~ 12 MJ/kg) in order to support the internal energy requirements of the process., The authors would like to thank MINECO and FEDER for their financial support (Project ENE2015-68320-R). O.S.P acknowledges the FPI fellowship (BES-2016-077750) funded by MINECO. The authors would also like to thank the Regional Government of Aragon (DGA) for the support provided under the research groups support programme and to CSIC through interdisciplinary thematic platform SUSPLAST., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A combined two-stage process of pyrolysis and catalytic cracking of municipal solid waste for the production of syngas and solid refuse-derived fuels

  • Veses, Albert
  • Sanahuja-Parejo, Olga
  • Callén, María Soledad
  • Murillo, Ramón
  • García, Tomás
Pyrolysis combined to either thermal cracking or catalytic cracking of municipal solid waste was performed in a laboratory-scale facility consisting of a fixed-bed reactor followed by a tubular cracking reactor. The results showed great potential for the production of syngas. The incorporation of inexpensive and widely available dolomite in the cracking reactor (with a constant feedstock to calcined dolomite ratio of 5:1) favoured the catalytic cracking of the primary pyrolysis products towards H2 and CO in a temperature range of 800–900 C. More particularly, it was possible at 900 C to achieve a syngas consisting of more than 80vol% CO and H2 with a heating value of 16MJ/Nm3. Additionally, a homogeneous solid fuel was obtained as a solid residue, which can be used to provide additional energy to support the process or as a refuse-derived fuel. Thus, the great potential of this process was demonstrated for turning municipal solid waste into a valuable gas fraction that can be used directly as a fuel or as a source of different valueadded products.