Skip to main content

REMEDIACION ELECTROQUIMICA Y BIOLOGICA DE CONTAMINANTES EMERGENTES: LIQUIDOS IONICOS

CTM2014-52471-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2014
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSIDAD DE VIGO

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Electroanalytical techniques applied to monitoring the electro-Fenton degradation of aromatic imidazolium-based ionic liquids

  • Poza Nogueiras, Verónica
  • Arellano Pardo, María
  • Rosales Villanueva, Emilio
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
  • González Romero, Elisa
In this study, the degradation of the ionic liquid (IL) 1,3-dicyclohexylbenzimidazolium chloride ([DCy6bim][Cl]) was carried out by applying an heterogeneous electro-Fenton (HEF) treatment using iron alginate spheres (FeAS) as catalyst. Initial trials were performed at current between 50 and 250 mA, different FeAS dosages (1–5 g), and [DCy6bim][Cl] concentrations (70–280 mg L−1) as key parameters for the characterization of the HEF process. Comparative experiments suggest that high current, low FeAS dosage and low [DCy6bim][Cl] concentration are the best conditions to yield near complete total organic carbon decay after 4 h. In order to evaluate the catalyst behaviour and iron leaching during the degradation of [DCy6bim][Cl], differential pulse voltammetry (DPV), a sensitive and selective electroanalytical technique, was used to monitor the IL degradation, by-products and iron evolution into the solution at high concentration levels. The profile of the voltammetric curves obtained by DPV suggests almost complete cleavage of the cation structure of [DCy6bim][Cl] during the first 120 min. At longer treatment times, DPV revealed the generation of iron complex with chloride and carboxylic acids. Finally, chromatographic analysis of these carboxylic acids and inorganic anions permitted to validate the results obtained by DPV and demonstrated the feasibility of the HEF process for IL degradation. Graphical Abstract: [Figure not available: see fulltext.], Ministerio de Economía y Competitividad | Ref. CTM2014-52471-R, Ministerio de Educación, Cultura y Deporte | Ref. FPU16/02644, Xunta de Galicia | Ref. ED431C 2017/47, Xunta de Galicia | Ref. ED431 2017/11, Xunta de Galicia | Ref. ED431 2017/06
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Studies of volumetric and transport properties of ionic liquid–water mixtures and its viability to be used in absorption systems

  • Sánchez Vázquez, Pablo Breogán
  • García Sánchez, Josefa
  • Salgado Carballo, Josefa
  • González Romero, Elisa
Binary systems of two ionic liquids (ILs), 1-ethylpyridinium methanesulfonate [C2Py][MeSO3] and choline dihydrogen phosphate [Chol][H2PO4], and water have been experimentally studied. Density, viscosity, electrical conductivity and proton activity have been measured at several temperatures covering all the miscibility range. From density data, isobaric coefficient of thermal expansion was calculated to study the volumetric behavior of the mixtures. All volumetric data were fit using polynomial equations. The Vogel–Fulcher–Tamman (VFT) equation accurately describes the temperature dependence of viscosity for all systems. Systems based on [C2Py][MeSO3] are less dense and viscous than those involving [Chol][H2PO4], making [C2Py][MeSO3] more suitable for absorption systems where pumping cost has a significant importance. Electrical conductivity data were adjusted using the Casteel–Amis equation. Similar trends were found for both systems, although ionic conductivity is higher for [C2Py][MeSO3] + H2O mixtures. The relation between viscosity and electrical conductivity was also explored. According to Walden plots, ILs present low ionicity; however, internal friction and ionic concentration does not seem to be enough to explain the behavior of ionic conductivity and IL concentration. Proton activity measurements show different tendencies with molar fraction of each IL, [C2Py][MeSO3] leads to lower paH+ values than [Chol][H2PO4] in the binary mixtures. Results of ionic conductivity and proton activity suggest a higher corrosive potential of [C2Py][MeSO3] + H2O; however, a further analysis needs to be done to evaluate this risk in absorption systems. Finally, a composition analysis based on ionic chromatography (IC) was carried out to obtain insight about its effect on their physicochemical properties., Ministerio de Economía y Competitividad | Ref. CTM2014-52471-R, Xunta de Galicia | Ref. R2014/015, Xunta de Galicia | Ref. R2014/030, Ministerio de Economía y Competitividad | Ref. DPI2012-38841, Ministerio de Ciencia e Innovación | Ref. CTQ2011-23925, Xunta de Galicia | Ref. EM2013/031
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Application of electro-Fenton treatment for the elimination of 1-Butyl-3-methylimidazolium triflate from polluted water

  • Bocos Álvarez, Elvira Susana
  • González Romero, Elisa
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
The presence of emerging contaminants like ionic liquids in the environment is prompting the search of new methods to remove them from environments. To our knowledge, there are only few studies reported in the literature regarding to the application of electro-Fenton to solve this problem. Nonetheless, during the last years it has demonstrated great effectiveness on the elimination of wide diversity of pollutants. For this reason, this study is focus on the degradation of a commonly used imidazolium ionic liquid 1-Butyl-3-methylimidazolium triflate ([C4mim][CF3SO3]) by electro-Fenton technology. Initial trials were performed using different supporting electrolytes, including NaNO3, Na2SO4 or NaCl. Voltammetric studies were carried out in order to elucidate the behavior of the studied pollutant at the anode surface in each tested electrolyte. Comparative experiments pointed out to NaNO3 (0.025 M) as the one yielding higher mineralization and degradation rates. Thus, [C4mim][CF3SO3], was completely degraded after 120 min with 87% of TOC reduction after 240 min. Moreover, these results can be improved by the increase of the NaNO3 concentration (0.075 M) and complete degradation and TOC reduction was attained at shorter treatment time. The ionic analysis ascertained these results, showing faster elimination under the use of NaNO3. Differential Pulse Voltammetry on this media revealed a strong interaction between the fluoride anion and the iron present in the medium and the formation of a complex between them. Finally, HPLC and GC/MS analysis permitted to follow the main intermediates formed along the treatment, thus proposing a plausible degradation pathway of [C4mim][CF3SO3]., Ministerio de Economía y Competitividad | Ref. CTM2014-52471-R, Ministerio de Economía y Competitividad | Ref. CTQ2015-71650-REDT, Ministerio de Economía y Competitividad | Ref. CTQ2015-71955-REDT, Xunta de Galicia | Ref. GRC 2013/003
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

New sources of halophilic lipases: Isolation of bacteria from Spanish and Turkish saltworks

  • Gutiérrez Arnillas, Esther
  • Rodríguez Rodríguez, Ana María
  • Sanromán Braga, María Ángeles
  • Deive Herva, Francisco Javier
High-salinity biotopes in Turkey and Spain have been demonstrated to be a suitable source of lipolytic enzyme-producing halophilic microorganisms. Three strains turned out to grow at high NaCl concentration (greater than 15%) and their ability to synthesize lipolytic enzymes was demonstrated on tributyrin and olive oil-containing plates by the formation of transparent or orangish halos around the colonies. The three isolates were cultivated in liquid medium and one of them was cherry-picked in terms of the enzyme production levels. It was subsequently genetically identified as Halomonas sp. LM1C. Response Surface Methodology (RSM) based on central composite design was used to optimize the culture conditions for lipase production, concluding that the maximum levels of lipase biosynthesis were obtained at 21.6 °C and pH 6.9. The impact of NaCl on the lipolytic activity of the obtained halophilic crude enzyme revealed an improved resistance against deactivation, when compared with a commercial lipase from Candida rugosa. The optimum reaction conditions (obtained by RSM) for the crude enzyme-biocatalyzed hydrolysis of p-nitrophenyl laurate turned out to be neutral pH and 29 °C. The process at optimum conditions was kinetically characterized by means of logistic equations, obtaining maximum activities near to 250 U/L and the use of a Luedeking & Piret type model allowed elucidating the metabolic characteristics of the synthesized lipolytic enzymes. The present investigation lays the foundation for implementing a biotechnological process to produce highly resistant lipolytic enzymes able to perform its biocatalytic function under extreme salt conditions., Ministerio de Economía y Competitividad | Ref. CTM2014-52471-R, Xunta de Galicia
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Current advances and trends in electro-Fenton process using heterogeneous catalysts – A review

  • Poza Nogueiras, Verónica
  • Rosales Villanueva, Emilio
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
Over the last decades, advanced oxidation processes have often been used alone, or combined with other techniques, for remediation of ground and surface water pollutants. The application of heterogeneous catalysis to electrochemical advanced oxidation processes is especially useful due to its efficiency and environmental safety. Among those processes, electro-Fenton stands out as the one in which heterogeneous catalysis has been broadly applied. Thus, this review has introduced an up-to-date collation of the current knowledge of the heterogeneous electro-Fenton process, highlighting recent advances in the use of different catalysts such as iron minerals (pyrite, magnetite or goethite), prepared catalysts by the load of metals in inorganic and organic materials, nanoparticles, and the inclusion of catalysts on the cathode. The effects of physical-chemical parameters as well as the mechanisms involved are critically assessed. Finally, although the utilization of this process to remediation of wastewater overwhelmingly outnumber other utilities, several applications have been described in the context of regeneration of adsorbent or the remediation of soils as clear examples of the feasibility of the electro-Fenton process to solve different environmental problems., Xunta de Galicia | Ref. ED431C 2017/47, Ministerio de Economía y Competitividad | Ref. CTM2014-52471-R
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Heterogeneous electro-Fenton as plausible technology for the degradation of imidazolinium-based ionic liquids

  • Poza Nogueiras, Verónica
  • Arellano Pardo, María
  • Rosales Villanueva, Emilio
  • Pazos Currás, Marta María
  • González Romero, Elisa
  • Sanromán Braga, María Ángeles
Conventional water treatments are generally inadequate for degradation of emerging pollutants such as ionic liquids (ILs). The use of heterogeneous electro-Fenton (HEF) has attracted great interest, due to its ability to efficiently oxidize a wide range of organic pollutants operating in cycles or in continuous mode. In this study, the removal of a complex IL from the imidazolinium family (1,3-Bis(2,4,6-trimethylphenyl)imidazolinium chloride), by means of HEF using iron alginate spheres as catalyst has been investigated, resulting in significant TOC decay after 6 h. The optimization of the key process parameters (current, IL concentration and catalyst dosage) has been performed using a Box-Behnken experimental design and achieving 76.98% of TOC abatement in 2 h of treatment. Current proved to be a crucial parameter and high catalyst dosage is required to achieve the maximum removal. In addition, an insight about the availability of iron into the reactor and the evolution of several intermediates has been carried out by employing differential pulse voltammetry on screen-printed carbon electrodes. The evolution of the different voltammetric peaks confirmed the influence of iron release, and the generation of several iron complexes has permitted the comprehension of the degradation pathway, which has been validated by chromatographic techniques., Ministerio de Economía y Competitividad (España) | Ref. CTM2014-52471-R
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

An effective electroanalytical approach for the monitoring of electroactive dyes and intermediate products formed in electro-Fenton treatment

  • Bouzayani, Bakhta
  • Bocos Álvarez, Elvira Susana
  • Elaoud, Sourour Chaâbane
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
  • González Romero, Elisa
Reactive Black 5 (RB5) is an electroactive diazo dye compound derivate of H-acid (coupling reaction), which cannot be effectively degraded by conventional or biological processes. In this work, the feasibility of electro-Fenton (EF) process to treat a simulated effluent polluted by RB5 dye and the effectiveness of electroanalysis by Linear Sweep Voltammetry (LSV) to monitor RB5, intermediates and by-products during the EF treatment have been demonstrated. Several variables on the electrochemical behaviour of RB5 have been determined under EF experimental conditions. The key factors are scan rate and dye concentration (in the presence and the absence of iron) and their effect on shape, position and height of RB5 peaks have been determined to obtain the best sensitivity and selectivity in the voltammetric analysis. Moreover, the iron appears as a strong electrocatalyst that promotes the electron transfer for the oxidation reaction of RB5 on screen-printed carbon electrode, in part, due to a very stable coordinate complex formed with RB5. Besides that, the degradation profiles have revealed the main stages along the EF process and the voltammetric kinetic data has given selective information about the RB5 degradation and the evolution of the electroactive products generated. The formation of aromatic/cyclic organic intermediates, and evolution of carboxylic acids, as well as the inorganic ions released during the treatment were validated by other techniques and a plausible pathway is proposed based on the obtained results., Ministerio de Economía y Competitividad | Ref. CTM2014-52471-R, Ministerio de Economía y Competitividad | Ref. CTQ2015-71650-REDT, Ministerio de Economía y Competitividad | Ref. CTQ2015-71955-REDT, Xunta de Galicia | Ref. GRC 2013/003