Skip to main content

APLICACIONES MEDIOAMBIENTALES Y ENERGETICAS DE LA TECNOLOGIA ELECTROQUIMICA

CTQ2015-71650-REDT

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Redes Investigación /Redes Excelencia
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Investigación, Desarrollo e Innovación
Beneficiary centre UNIVERSIDAD DE BARCELONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

BDD Anodic Treatment of 6:2 Fluorotelomer Sulfonate (6:2 FTSA).Evaluation of Operating Variables and By-Product Formation

  • Urtiaga, Ane
  • Soriano, Álvaro
  • Carrillo Abad, Jorge
[EN] The concerns about the undesired impacts on human health and the environment of long chain perfluorinated alkyl substances (PFASs) have driven industrial initiatives to replace PFASs by shorter chain fluorinated homologues. 6:2 fluorotelomer sulfonic acid (6:2 FTSA) is applied as alternative to PFOS in metal plating and fluoropolymer manufacture. This study reports the electrochemical treatment of aqueous 6:2 FTSA solutions on microcrystalline BDD anodes. Bench scale batch experiments were performed, focused on assessing the effect of the electrolyte and the applied current density (5¿600 A m¿2) on the removal of 6:2 FTSA, the reduction of total organic carbon (TOC) and the fluoride release. Results showed that at the low range of applied current density (J¿=¿50 A m¿2), using NaCl, Na2SO4 and NaClO4, the electrolyte exerted a minimal effect on removal rates. The formation of toxic inorganic chlorine species such as ClO4¿ was not observed. When using Na2SO4 electrolyte, increasing the applied current density to 350¿600 A m¿2 promoted a notable enhancement of the 6:2 FTSA removal and defluorination rates, pointing to the positive contribution of electrogenerated secondary oxidants to the overall removal rate. 6:2 FTSA was transformed into shorter-chain PFCAs, and eventually into CO2 and fluoride, as TOC reduction was >90%. Finally, it was demonstrated that diffusion in the liquid phase was controlling the overall kinetic rate, although with moderate improvements due to secondary oxidants at very high current densities., Support from MINECO and SPAIN-FEDER 2014e2020 to project CTM 2016-75509-R and to the Spanish Excellence Network E3TECH (CTQ 2015-71650-RDT) is acknowledged. J. Carrillo-Abad thanks the Generalitat Valenciana for granting a post-doctoral fellowship (APOSTD/2015/019). The authors are thankful to Dr. R. Buck (Chemours Co.) for kindly providing samples of Capstone FS10
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Electrochemical oxidation of 6:2 fluorotelomer sulfonic acid (6:2 FTSA) on BDD: electrode characterization and mechanistic investigation

  • Carrillo Abad, Jorge
  • Urtiaga, A.
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
[EN] 6:2 Fluorotelomer sulfonic acid (6:2 FTSA) is used as surfactant and foam stabilizer in the formulation of air firefighting foams (AFFFs). 6:2 FTSA is produced as an alternative to persistent and bioaccumulative long-chain perfluoroalkyl compounds. This study investigates the electrochemical degradation of 6:2 FTSA on a boron-doped diamond (BDD) anode. First, the BDD anode was characterized by cyclic voltammetry, revealing that the direct oxidation of 6:2 FTSA occurred at an anodic potential of 2.72 V versus Ag/AgCl (saturated KCl) electrode. Increasing the scan rate resulted in an increased current intensity of the direct oxidation peak, and this relationship was analyzed using the Randles¿Sevcik equation to calculate the diffusion coefficient of 6:2 FTSA in aqueous media (D = 4.16 × 10¿6 cm2 s¿1 at room temperature). This value is in close agreement to the predicted value obtained by the Wilke¿Chang correlation. In electrolysis experiments under potentiostatic control, increasing the anode potential over 2.72 V greatly enhanced the 6:2 FTSA removal, and the simultaneous formation of short-chain perfluorocarboxylic acids (perfluorohexanoic acid, perfluorpentanoic acid and perfluorobutanoic acid) and fluoride release were observed. Based on these observations, the 6:2 FTSA degradation pathway was predicted to start by the attack of hydroxyl radicals to the non-fluorinated carbons to form a perfluorocarboxylate, followed by a single electron transfer to the anode to yield a reactive radical C6F13COO¿. The latter species decarboxylated and finally combined with hydroxyl radicals to allow defluorination to form shorter-chain perfluorocarboxylic acids., Support from the Spanish Excellence Network E3TECH (CTQ2015-71650-RDT) and Projects CTM2013-44081-R and CTM2016-75509-R CTM2016-75509-R (MINECO, SPAIN-FEDER 2014-2020) is acknowledged. J. Carrillo-Abad thanks the Generalitat Valenciana for granting a post-doctoral fellowship (APOSTD/2015/019).
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Application of electro-Fenton treatment for the elimination of 1-Butyl-3-methylimidazolium triflate from polluted water

  • Bocos Álvarez, Elvira Susana
  • González Romero, Elisa
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
The presence of emerging contaminants like ionic liquids in the environment is prompting the search of new methods to remove them from environments. To our knowledge, there are only few studies reported in the literature regarding to the application of electro-Fenton to solve this problem. Nonetheless, during the last years it has demonstrated great effectiveness on the elimination of wide diversity of pollutants. For this reason, this study is focus on the degradation of a commonly used imidazolium ionic liquid 1-Butyl-3-methylimidazolium triflate ([C4mim][CF3SO3]) by electro-Fenton technology. Initial trials were performed using different supporting electrolytes, including NaNO3, Na2SO4 or NaCl. Voltammetric studies were carried out in order to elucidate the behavior of the studied pollutant at the anode surface in each tested electrolyte. Comparative experiments pointed out to NaNO3 (0.025 M) as the one yielding higher mineralization and degradation rates. Thus, [C4mim][CF3SO3], was completely degraded after 120 min with 87% of TOC reduction after 240 min. Moreover, these results can be improved by the increase of the NaNO3 concentration (0.075 M) and complete degradation and TOC reduction was attained at shorter treatment time. The ionic analysis ascertained these results, showing faster elimination under the use of NaNO3. Differential Pulse Voltammetry on this media revealed a strong interaction between the fluoride anion and the iron present in the medium and the formation of a complex between them. Finally, HPLC and GC/MS analysis permitted to follow the main intermediates formed along the treatment, thus proposing a plausible degradation pathway of [C4mim][CF3SO3]., Ministerio de Economía y Competitividad | Ref. CTM2014-52471-R, Ministerio de Economía y Competitividad | Ref. CTQ2015-71650-REDT, Ministerio de Economía y Competitividad | Ref. CTQ2015-71955-REDT, Xunta de Galicia | Ref. GRC 2013/003
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

An effective electroanalytical approach for the monitoring of electroactive dyes and intermediate products formed in electro-Fenton treatment

  • Bouzayani, Bakhta
  • Bocos Álvarez, Elvira Susana
  • Elaoud, Sourour Chaâbane
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
  • González Romero, Elisa
Reactive Black 5 (RB5) is an electroactive diazo dye compound derivate of H-acid (coupling reaction), which cannot be effectively degraded by conventional or biological processes. In this work, the feasibility of electro-Fenton (EF) process to treat a simulated effluent polluted by RB5 dye and the effectiveness of electroanalysis by Linear Sweep Voltammetry (LSV) to monitor RB5, intermediates and by-products during the EF treatment have been demonstrated. Several variables on the electrochemical behaviour of RB5 have been determined under EF experimental conditions. The key factors are scan rate and dye concentration (in the presence and the absence of iron) and their effect on shape, position and height of RB5 peaks have been determined to obtain the best sensitivity and selectivity in the voltammetric analysis. Moreover, the iron appears as a strong electrocatalyst that promotes the electron transfer for the oxidation reaction of RB5 on screen-printed carbon electrode, in part, due to a very stable coordinate complex formed with RB5. Besides that, the degradation profiles have revealed the main stages along the EF process and the voltammetric kinetic data has given selective information about the RB5 degradation and the evolution of the electroactive products generated. The formation of aromatic/cyclic organic intermediates, and evolution of carboxylic acids, as well as the inorganic ions released during the treatment were validated by other techniques and a plausible pathway is proposed based on the obtained results., Ministerio de Economía y Competitividad | Ref. CTM2014-52471-R, Ministerio de Economía y Competitividad | Ref. CTQ2015-71650-REDT, Ministerio de Economía y Competitividad | Ref. CTQ2015-71955-REDT, Xunta de Galicia | Ref. GRC 2013/003