Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Influence of soil properties on the development of bacterial community tolerance to Cu, Ni, Pb and Zn

  • Campillo Cora, Claudia
  • González Feijóo, Rocío
  • Arias Estévez, Manuel
  • Fernández Calviño, David
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, Pollution-Induced Community Tolerance (PICT) is a helpful and sensitive methodology to evaluate the effect of metal pollution in soils using microorganisms as indicators. PICT was used to determine the increase of bacterial community tolerance to Cu, Ni, Pb and Zn (Δlog IC50), and to assess the influence of soil properties on the development of bacterial community tolerance to Cu, Ni, Pb, and Zn. Soil samples showed a wide range of properties, such as pH (3.96–7.47), texture (13.8–31.7% clay) or organic matter (9.7–30.7%). Bacterial growth measured by the [3H]-leucine incorporation method was used as the PICT endpoint. Bacterial communities generally developed tolerance in response to Cu, Ni and Zn additions to soils. However, bacterial communities showed no tolerance to Pb, probably due to high Pb sorption in studied soils. Soil properties influenced the development of bacterial community tolerance to Cu, Ni and Zn. Effective cation exchange and a soil sorption parameter (Freundlich's linearity index) were the selected variables to estimate Δlog IC50 to Cu (R2 = 0.65). Clay content and Ni-soluble are the main factors to estimate Δlog IC50 to Ni (R2 = 0.63). Organic matter content and a sorption parameter (maximum sorption capacity of the soil from Langmuir equation) are the soil properties to estimate Δlog IC50 to Zn (R2 = 0.45). Most of the variables exerted their effect in soil, i.e. PICT selection phase. However, clay content affected bacterial community tolerance determination (PICT detection phase), leading to overestimated measurements of bacterial community tolerance., Ministerio de Economía y Competitividad | Ref. CTM 2015-73422-JIN, Ministerio de Economía, Industria y Competitividad | Ref. RYC-2016-20411, Xunta de Galicia | Ref. ED401A-2020/084
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Influence of physicochemical properties and parent material on chromium fractionation in soils

  • Campillo Cora, Claudia
  • Rodriguez Gonzalez, Laura
  • Arias Estévez, Manuel
  • Fernández Calviño, David
  • Soto Gómez, Diego
Chromium is an element that possess several oxidation states and can easily pass from one to another, so its behavior in soils is very complex. For this reason, determining its fate in the environment can be difficult. In this research work we tried to determine which factors affect the chromium fractionation in natural soils, conditioning chromium mobility. We paid special attention to the parent material. For this purpose, extraction experiments were carried out on spiked soils incubated for 50–60 days, using H2O, CaCl2 and diethylenetriaminepentaacetic acid (DTPA). The most efficient extraction rate in all soils was achieved using water, followed by CaCl2 and DTPA. We obtained models with an adjusted R2 of 0.8097, 0.8471 and 0.7509 for the H2O Cr, CaCl2 Cr and DTPA Cr respectively. All models were influenced by the amount of chromium added and the parent material: amphibolite and granite influenced the amount of H2O Cr extracted, and schist affected the other two fractions (CaCl2 and DTPA). Soil texture also played an important role in the chromium extraction, as well as the amounts of exchangeable aluminum and magnesium, and the bioavailable phosphorus. We concluded that it is possible to make relatively accurate predictions of the behavior of the different Cr fractions studied, so that optimized remediation strategies for chromium-contaminated soils can be designed on the basis of a physicochemical soil characterization., Xunta de Galicia | Ref. ED431C 2017/62-GRC, Xunta de Galicia | Ref. ED481A-2020/084, Ministerio de Economía y Competitividad | Ref. CTM2015-73422-JIN, Ministerio de Educación | Ref. FJC2019-039176-I
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Dissolved organic matter as a confounding factor in the determination of pollution-induced community tolerance (PICT) of bacterial communities to heavy metals using the leucine incorporation method

  • Campillo Cora, Claudia
  • González Feijóo, Rocío
  • Arias Estévez, Manuel
  • Fernández Calviño, David
PICT methodology using the leucine incorporation method (Leu-PICT) is useful for assessing heavy metal contamination in soils. First, bacterial community is exposed to metal in the soil (selection phase), developing tolerance if metal exerts toxicity. Secondly, in detection phase, bacterial suspensions are obtained, and tolerance is quantified by a second exposition of bacterial community to the metal using Leu-PICT methodology. However, during detection phase when Leu-PICT is performed, some characteristics of bacterial suspensions may change metal bioavailability. We assess the influence of dissolved organic matter (DOM) in bacterial suspensions, as humic acids (HA), on Leu-PICT determination to Cr, Cu, Ni, Pb and Zn. Results showed that the presence of HA in bacterial suspensions causes underestimations of bacterial community tolerance to Cr (increasing Cr toxicity), and overestimations of bacterial community tolerance to Cu, Ni, Pb, and Zn (reducing metal toxicity). In addition, the magnitude of these overestimations was different depending on the metal., Xunta de Galicia | Ref. ED401A-2020/084, Ministerio de Economía y Competitividad | Ref. CTM2015-73422-JIN, Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Estimation of baseline levels of bacterial community tolerance to Cr, Ni, Pb, and Zn in unpolluted soils, a background for PICT (pollution-induced community tolerance) determination

  • Campillo Cora, Claudia
  • Soto Gómez, Diego
  • Arias Estévez, Manuel
  • Bååth, Erland
  • Fernández Calviño, David
The PICT method (pollution-induced community tolerance) can be used to assess whether changes in soil microbial response are due to heavy metal toxicity or not. Microbial community tolerance baseline levels can, however, also change due to variations in soil physicochemical properties. Thirty soil samples (0–20 cm), with geochemical baseline concentrations (GBCs) of heavy metals and from fve diferent parent materials (granite, limestone, schist, amphibolite, and serpentine), were used to estimate baseline levels of bacterial community tolerance to Cr, Ni, Pb, and Zn using the leucine incorporation method. General equations (n=30) were determined by multiple linear regression using general soil properties and parent material as binary variables, explaining 38% of the variance in log IC50 (concentration that inhibits 50% of bacterial growth) values for Zn, with 36% for Pb, 44% for Cr, and 68% for Ni. The use of individual equations for each parent material increased the explained variance for all heavy metals, but the presence of a low number of samples (n=6) lead to low robustness. Generally, clay content and dissolved organic C (DOC) were the main variables explaining bacterial community tolerance for the tested heavy metals. Our results suggest that these equations may permit applying the PICT method with Zn and Pb when there are no reference soils, while more data are needed before using this concept for Ni and Cr., Ministerio de Economía, Industria y Competitividad | Ref. RYC-2016-20411, Ministerio de Economía y Competitividad | Ref. CTM2015-73422-JIN, Xunta de Galicia | Ref. ED481A-2020/084, Ministerio de Educación | Ref. FJC2019-039176-I
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Assessment of polluted soil remediation using bacterial community tolerance to heavy metals as an indicator

  • Campillo Cora, Claudia
  • Soto Gómez, Diego
  • Arias Estévez, Manuel
  • Fernández Calviño, David
The assessment of remediation on metal-polluted soils is usually focused on total and/or bioavailable metal content. However, these chemical variables do not provide direct information about reductions in heavy metals pressure on soil microorganisms. We propose the use of bacterial communities to evaluate the efficiency of three remediation techniques: crushed mussel shell (CMS) and pine bark (PB) as soil amendments and EDTA-washing. A soil sample was polluted with different doses of Cu, Ni, and Zn (separately). After 30 days of incubation, the remediation techniques were applied, and bacterial community tolerance to heavy metals determined. If bacterial communities develop tolerance, it is an indicator that the metal is exerting toxicity on them. Soil bacterial communities developed tolerance to Cu, Ni, and Zn in response to metal additions. After remediation, bacterial communities showed decreases in bacterial community tolerance to Cu, Ni, and Zn for all remediation techniques. For Cu and Ni, soil EDTA-washing showed the greatest reduction of bacterial community tolerance to Cu and Ni, respectively, while for Zn the soil amendment with PB was the most effective remediation technique. Thus, bacterial community tolerance to heavy metals successfully detect differences in the effectiveness of the three remediation techniques., Ministerio de Economía y Competitividad | Ref. CTM2015-73422-JIN, Ministerio de Economía, Industria y Competitividad | Ref. RYC-2016-20411, Región de Murcia | Ref. 21525/EE/21, Xunta de Galicia | Ref. ED401A-2020/084
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Do heavy metals affect bacterial communities more in small repeated applications or in a single large application?

  • Campillo Cora, Claudia
  • González Feijóo, Rocío
  • Arias Estévez, Manuel
  • Fernández Calviño, David
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, Heavy metals from anthropogenic sources accumulate slowly but steadily, leading to high metal concentration levels in soil. However, the effect of each heavy metal on soil bacterial communities is usually assessed in laboratories by a single application of individually spiked metals. We evaluated the differences between single individual application and repeated individual applications of Cr, Cu, Ni, Pb, and Zn on bacterial communities, through pollution-induced community tolerance (PICT), using bacterial growth as the endpoint (3H-leucine incorporation method). We found that PICT development was higher when soil was spiked in individual single application than individual repeated applications for Cu, Ni and Zn. In contrast, bacterial communities did not show different tolerance between singly or repeatedly when soil was spiked with Cr. In the case of Pb any increase of bacterial community tolerance to this metal was found despite high doses applied (up to 2000 mg kg����� 1). These results are relevant for the interpretation of the effects of heavy metals on soil microbes in order to avoid laboratory overestimations of the real effects of heavy metals on soil microbes., Ministerio de Economía e Competitividad | Ref. CTM2015-73422-JIN, Ministerio de Economía e Competitividad | Ref. RYC- 2016-20411, Xunta de Galicia | Ref. ED401A-2020/084
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Bacterial community tolerance to Cu in soils with geochemical baseline concentrations (GBCs) of heavy metals: Importance for pollution induced community tolerance (PICT) determinations using the leucine incorporation method

  • Campillo Cora, Claudia
  • Soto Gómez, Diego
  • Arias Estévez, Manuel
  • Bååth, Erland
  • Fernández Calviño, David
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, PICT (Pollution Induced Community Tolerance) to Cu is a useful and sensitive tool to assess the effects of Cu pollution in soils under laboratory conditions. However, in field situations, the absence of reference values, i.e. bacterial community tolerance to Cu baseline from non-polluted soils, make the method uncertain when we want to know if a soil is or is not polluted from a microbiological point of view. In order to shed some light on this topic, the PICT (Pollution Induced Community Tolerance) concept was used to determine the bacterial community tolerance to Cu in uncontaminated soils developed on five different parent materials, using log IC50 as a tolerance index. IC50 was calculated as the amount of Cu that inhibit 50% of bacterial growth (estimated via the leucine incorporation method) in a bacterial suspension extracted from soil. With physico-chemical soil characteristics and type of parent material, a linear multiple regression equation was fitted explaining 80% of the variance in log IC50 values. This equation provides a useful tool to estimate the bacterial community tolerance to Cu baseline in a soil using the general soil characteristics, allowing for the more general use of PICT without the need of reference soils., Ministerio de Economía y Competitividad | Ref. CTM2015-73422-JIN, Xunta de Galicia | Ref. ED431F 2018/06