Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Influence of soil properties on the development of bacterial community tolerance to Cu, Ni, Pb and Zn

  • Campillo Cora, Claudia
  • González Feijóo, Rocío
  • Arias Estévez, Manuel
  • Fernández Calviño, David
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, Pollution-Induced Community Tolerance (PICT) is a helpful and sensitive methodology to evaluate the effect of metal pollution in soils using microorganisms as indicators. PICT was used to determine the increase of bacterial community tolerance to Cu, Ni, Pb and Zn (Δlog IC50), and to assess the influence of soil properties on the development of bacterial community tolerance to Cu, Ni, Pb, and Zn. Soil samples showed a wide range of properties, such as pH (3.96–7.47), texture (13.8–31.7% clay) or organic matter (9.7–30.7%). Bacterial growth measured by the [3H]-leucine incorporation method was used as the PICT endpoint. Bacterial communities generally developed tolerance in response to Cu, Ni and Zn additions to soils. However, bacterial communities showed no tolerance to Pb, probably due to high Pb sorption in studied soils. Soil properties influenced the development of bacterial community tolerance to Cu, Ni and Zn. Effective cation exchange and a soil sorption parameter (Freundlich's linearity index) were the selected variables to estimate Δlog IC50 to Cu (R2 = 0.65). Clay content and Ni-soluble are the main factors to estimate Δlog IC50 to Ni (R2 = 0.63). Organic matter content and a sorption parameter (maximum sorption capacity of the soil from Langmuir equation) are the soil properties to estimate Δlog IC50 to Zn (R2 = 0.45). Most of the variables exerted their effect in soil, i.e. PICT selection phase. However, clay content affected bacterial community tolerance determination (PICT detection phase), leading to overestimated measurements of bacterial community tolerance., Ministerio de Economía y Competitividad | Ref. CTM 2015-73422-JIN, Ministerio de Economía, Industria y Competitividad | Ref. RYC-2016-20411, Xunta de Galicia | Ref. ED401A-2020/084
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Influence of physicochemical properties and parent material on chromium fractionation in soils

  • Campillo Cora, Claudia
  • Rodriguez Gonzalez, Laura
  • Arias Estévez, Manuel
  • Fernández Calviño, David
  • Soto Gómez, Diego
Chromium is an element that possess several oxidation states and can easily pass from one to another, so its behavior in soils is very complex. For this reason, determining its fate in the environment can be difficult. In this research work we tried to determine which factors affect the chromium fractionation in natural soils, conditioning chromium mobility. We paid special attention to the parent material. For this purpose, extraction experiments were carried out on spiked soils incubated for 50–60 days, using H2O, CaCl2 and diethylenetriaminepentaacetic acid (DTPA). The most efficient extraction rate in all soils was achieved using water, followed by CaCl2 and DTPA. We obtained models with an adjusted R2 of 0.8097, 0.8471 and 0.7509 for the H2O Cr, CaCl2 Cr and DTPA Cr respectively. All models were influenced by the amount of chromium added and the parent material: amphibolite and granite influenced the amount of H2O Cr extracted, and schist affected the other two fractions (CaCl2 and DTPA). Soil texture also played an important role in the chromium extraction, as well as the amounts of exchangeable aluminum and magnesium, and the bioavailable phosphorus. We concluded that it is possible to make relatively accurate predictions of the behavior of the different Cr fractions studied, so that optimized remediation strategies for chromium-contaminated soils can be designed on the basis of a physicochemical soil characterization., Xunta de Galicia | Ref. ED431C 2017/62-GRC, Xunta de Galicia | Ref. ED481A-2020/084, Ministerio de Economía y Competitividad | Ref. CTM2015-73422-JIN, Ministerio de Educación | Ref. FJC2019-039176-I
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Tesis doctoral (DoctoralThesis)

Use of soil microbial communities as indicators of soil pollution by heavy metals, Utilización das comunidades microbianas do solo coma indicadores da contaminación por metais pesados, Utilización de las comunidades microbianas del suelo como indicadores de la contaminación por metales pesados

  • Campillo Cora, Claudia
Muchas de las actividades desarrolladas por el ser humano han conducido a incrementos de la concentración de metales pesados en muchos suelos a lo largo del mundo. Una vez en el suelo, los metales pesados pueden afectar negativamente a sus funciones y poner en riesgo los servicios por él prestados. Por tanto, es necesaria la monitorización de los suelos en los que existe riesgo de contaminación por metales pesados, y en su caso, tomar medidas para minimizar los impactos de esta acumulación. Sin embargo, existe un importante problema a resolver ¿Cuándo se debe actuar?, es decir, ¿A partir de que niveles de acumulación de metales pesados en el suelo debemos actuar? El objetivo general del presente proyecto es estudiar los efectos de la acumulación de metales pesados sobre los microorganismos del suelo, contribuyendo a esclarecer cuando sería necesario intervenir en un suelo contaminado por metales pesados desde el punto de vista de las comunidades microbianas del suelo. Para lograr este fin se utilizará el concepto de tolerancia de las comunidades bacterianas a los metales pesados (PICT). En primer lugar se optimizará el método de determinación de la tolerancia de las comunidades bacterianas a 5 metales pesados (Cu, Zn, Ni, Pb y Cr), en relación a las condiciones óptimas de pH, efectos del carbono orgánico disuelto, etc. A continuación se evaluarán los niveles base de tolerancia de las comunidades microbianas a los metales pesados en suelos no contaminados en relación a sus propiedades edáficas (material de partida, textura, pH, materia orgánica, etc.). Con esto se elaborarán tablas de niveles de referencia para suelos no contaminados que serán útiles para comparar los datos obtenidos en áreas contaminadas con los niveles de referencia. A continuación se tratará de obtener medidas de tolerancia a metales pesados en suelos con muy baja actividad microbiana por poseer un pH extremadamente ácido y bajo contenido en materia orgánica, circunstancia que se intentará conseguir mediante la adición de sustratos que incrementan la actividad bacteriana. Esto será de utilidad para la evaluación de la contaminación de metales pesados en áreas mineras. A continuación, se estudiará el incremento de la tolerancia de las comunidades bacterianas a los metales en respuesta a adiciones de metales pesados al suelo en condiciones de laboratorio. Este estudio se hará comparando suelos con distinto pH y materia orgánica para estudiar el efecto de estas características del suelo sobre los incrementos de tolerancia. También se estudiará la disminución de la tolerancia de las comunidades bacterianas a metales pesados tras dos tratamientos de restauración del suelo, uno de inmovilización de los metales pesados y otro de movilización y posterior eliminación de los metales pesados del suelo. A continuación, se estudiarán las relaciones existentes entre la capacidad de los suelos para retener metales y la tolerancia de las comunidades bacterianas a los metales pesados. También se estudiarán las relaciones existentes entre la tolerancia a metales pesados desarrollada por las comunidades bacterianas del suelo y las distintas formas en las que los metales se acumulan en el suelo asociándose a diferentes componentes del mismo, es decir, su fraccionamiento. Se pretende generar un conocimiento que permita disponer de herramientas adecuadas para evaluar la contaminación del suelo por metales pesados, contribuyendo a mejorar la gestión de áreas con este tipo de suelos., Moitas das actividades levadas a cabo polo ser humano deron lugar a incrementos da concentración de metais pesados en moitos solo en todo o mundo. Unha vez no solo, os metais pesados poden afectar negativamente ás súas funcións e poñer en risco os servizos por el prestados. Polo tanto, é necesaria a monitorización dos solos nos que existe risco de contaminación por metais pesados, e no seu caso, tomar medidas para minimizar os impactos desta acumulación. Sen embargo, existe un importante problema a resolver, cando se debe actuar?, é dicir, a partir de que niveis de acumulación de metais pesados no solo debemos actuar?. O obxectivo xeral desta Tese de Doutoramento é estudar os efectos da acumulación de metais pesados sobre os microorganismos do solo, contribuíndo a esclarecer cando sería necesario intervir nun solo contaminado por metais pesados dende o punto de vista das comunidades microbianas do solo. Para lograr este fin, utilizarase o concepto de tolerancia as comunidades bacterianas ós metais pesados (PICT). En primeiro lugar, optimizarase o método de determinación da tolerancia das comunidades bacterianas a 5 metais pesados (cobre, zinc, níquel, chumbo e cromo), en relación ás condicións óptimas de pH, efectos do carbono orgánico en disolución, etc. A continuación avaliaranse os niveis base de tolerancia das comunidades microbianas ós metais pesados en solos non contaminados en relación ás súas propiedades edáficas (material de partida, textura, pH, materia orgánica, etc.). Con isto elaboraranse táboas de niveis de referencia para solos non contaminados que será útiles para comparar os datos obtidos en áreas contaminadas cós niveis de referencia. A continuación, tratarase de obter medidas de tolerancia a metais pesados en solos con moi baixa actividade microbiana por ter un pH extremadamente ácido e baixo contido en materia orgánica, circunstancia que se intentará conseguir mediante a adición de substratos que incrementen a actividade bacteriana. Isto será de utilizade para a avaliación da contaminación de metais pesados en áreas mineiras. Seguidamente, estudarase o incremento da tolerancia das comunidades bacterianas ós metais en resposta a adicións de metais pesados ó solo en condicións de laboratorio. Este estudo farase comparando solos con distinto pH e materia orgánica para estudar o efecto destas características do solo sobre os incrementos de tolerancia. Estudarase tamén a diminución da tolerancia das comunidades bacterianas a metais pesados tras dous tratamentos de restauración do solo: un de inmobilización dos metais pesados e outro de mobilización e posterior eliminación dos metais pesados do solo. Logo estudiaranse as relacións existentes entre a capacidade dos solos para reter metais e a tolerancia das comunidades bacterianas ós metais pesados. Estudaranse tamén as relacións existentes entre a tolerancia a metais pesados desenvolvida polas comunidades bacterianas do solo e as distintas formas nas que os metais se poden acumular no solo, asociándose a diferentes compoñentes do mesmo, é dicir, o seu fraccionamento. Preténdese xerar un coñecemento que permita dispoñer de ferramentas adecuadas para avaliar a contaminación do solo por metais pesados, contribuíndo a mellorar a xestión de áreas con este tipo de solos, Many human activities have led to increases in heavy metal concentrations in soils worldwide. Once in the soil, heavy metals may affect soil functions negatively, with high risk of damage the soil services. Therefore, monitoring of soils with high risk of soil metal toxicity and actions to minimize heavy metal accumulation impacts are needed. However, there is an important problem to be solved. When must we act, that is at what heavy metal concentration must we take regulatory and/or remediation actions? The general objective of the project is to study the effects of heavy metals accumulation in the soil on soil microorganisms, contributing to clarify when we must act in heavy metal polluted soils from microbial communities’ point of view. In order to achieve this general objective, the bacterial community tolerance development to heavy metals concept (PICT) will be used. First, bacterial community tolerance to 5 heavy metals (Cu, Zn, Ni, Pb and Cr) will be optimized in relation with pH, dissolved organic carbon, etc., in order to exclude tolerance detection artifacts. After that, the bacterial community tolerance to the heavy metals will be evaluated in non-polluted soils in relation with soil characteristics (geology, texture, pH, organic matter, etc.). With these results tables with bacterial community tolerance to heavy metals base levels in relation to soil properties will be produced. The tables will be useful to compare tolerance levels found in polluted areas with reference levels in non-polluted soils. Also, we will optimize bacterial community tolerance to heavy metals measurements in soils with very low microbial activity, using a soil with an extremely acid pH and low organic matter content. Substrates which increase bacterial community growth, such as plant material, will be added to the soil with this purpose. This experiment will be useful in evaluating soil pollution by heavy metals in mining areas. The increases of bacterial community tolerance to heavy metals will be studied in response to heavy metals addition under laboratory conditions. Comparisons among soils with different pH and soil organic matter will be used in order to evaluate the effect of these characteristics on bacterial community tolerance to heavy metals development. Decreasing of bacterial community tolerance to heavy metals in response to two soil restauration treatments will also be analyzed. One treatment consists in a heavy metal immobilization in the soil, and the other in heavy metal mobilization and removal from soil. The relations between heavy metals soil sorption capacities and the increases of bacterial community tolerance to heavy metals in response to heavy metal pollution will be studied with these treatments. Finally, the relation between the bacterial community tolerance to heavy metals and heavy metal fractionation in the soil will be studied. With all these activities we will produce a method that easily can determine bacterial community tolerance to heavy metals in the soil, and provide suitable tools for evaluating soil pollution by heavy metals, contributing to a better management of areas with polluted soils., Ministerio de Economía y Competitividad | Ref. CTM2015-73422-JIN, Xunta de Galicia | Ref. ED401A-2020/084
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Dissolved organic matter as a confounding factor in the determination of pollution-induced community tolerance (PICT) of bacterial communities to heavy metals using the leucine incorporation method

  • Campillo Cora, Claudia
  • González Feijóo, Rocío
  • Arias Estévez, Manuel
  • Fernández Calviño, David
PICT methodology using the leucine incorporation method (Leu-PICT) is useful for assessing heavy metal contamination in soils. First, bacterial community is exposed to metal in the soil (selection phase), developing tolerance if metal exerts toxicity. Secondly, in detection phase, bacterial suspensions are obtained, and tolerance is quantified by a second exposition of bacterial community to the metal using Leu-PICT methodology. However, during detection phase when Leu-PICT is performed, some characteristics of bacterial suspensions may change metal bioavailability. We assess the influence of dissolved organic matter (DOM) in bacterial suspensions, as humic acids (HA), on Leu-PICT determination to Cr, Cu, Ni, Pb and Zn. Results showed that the presence of HA in bacterial suspensions causes underestimations of bacterial community tolerance to Cr (increasing Cr toxicity), and overestimations of bacterial community tolerance to Cu, Ni, Pb, and Zn (reducing metal toxicity). In addition, the magnitude of these overestimations was different depending on the metal., Xunta de Galicia | Ref. ED401A-2020/084, Ministerio de Economía y Competitividad | Ref. CTM2015-73422-JIN, Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Estimation of baseline levels of bacterial community tolerance to Cr, Ni, Pb, and Zn in unpolluted soils, a background for PICT (pollution-induced community tolerance) determination

  • Campillo Cora, Claudia
  • Soto Gómez, Diego
  • Arias Estévez, Manuel
  • Bååth, Erland
  • Fernández Calviño, David
The PICT method (pollution-induced community tolerance) can be used to assess whether changes in soil microbial response are due to heavy metal toxicity or not. Microbial community tolerance baseline levels can, however, also change due to variations in soil physicochemical properties. Thirty soil samples (0–20 cm), with geochemical baseline concentrations (GBCs) of heavy metals and from fve diferent parent materials (granite, limestone, schist, amphibolite, and serpentine), were used to estimate baseline levels of bacterial community tolerance to Cr, Ni, Pb, and Zn using the leucine incorporation method. General equations (n=30) were determined by multiple linear regression using general soil properties and parent material as binary variables, explaining 38% of the variance in log IC50 (concentration that inhibits 50% of bacterial growth) values for Zn, with 36% for Pb, 44% for Cr, and 68% for Ni. The use of individual equations for each parent material increased the explained variance for all heavy metals, but the presence of a low number of samples (n=6) lead to low robustness. Generally, clay content and dissolved organic C (DOC) were the main variables explaining bacterial community tolerance for the tested heavy metals. Our results suggest that these equations may permit applying the PICT method with Zn and Pb when there are no reference soils, while more data are needed before using this concept for Ni and Cr., Ministerio de Economía, Industria y Competitividad | Ref. RYC-2016-20411, Ministerio de Economía y Competitividad | Ref. CTM2015-73422-JIN, Xunta de Galicia | Ref. ED481A-2020/084, Ministerio de Educación | Ref. FJC2019-039176-I
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Assessment of polluted soil remediation using bacterial community tolerance to heavy metals as an indicator

  • Campillo Cora, Claudia
  • Soto Gómez, Diego
  • Arias Estévez, Manuel
  • Fernández Calviño, David
The assessment of remediation on metal-polluted soils is usually focused on total and/or bioavailable metal content. However, these chemical variables do not provide direct information about reductions in heavy metals pressure on soil microorganisms. We propose the use of bacterial communities to evaluate the efficiency of three remediation techniques: crushed mussel shell (CMS) and pine bark (PB) as soil amendments and EDTA-washing. A soil sample was polluted with different doses of Cu, Ni, and Zn (separately). After 30 days of incubation, the remediation techniques were applied, and bacterial community tolerance to heavy metals determined. If bacterial communities develop tolerance, it is an indicator that the metal is exerting toxicity on them. Soil bacterial communities developed tolerance to Cu, Ni, and Zn in response to metal additions. After remediation, bacterial communities showed decreases in bacterial community tolerance to Cu, Ni, and Zn for all remediation techniques. For Cu and Ni, soil EDTA-washing showed the greatest reduction of bacterial community tolerance to Cu and Ni, respectively, while for Zn the soil amendment with PB was the most effective remediation technique. Thus, bacterial community tolerance to heavy metals successfully detect differences in the effectiveness of the three remediation techniques., Ministerio de Economía y Competitividad | Ref. CTM2015-73422-JIN, Ministerio de Economía, Industria y Competitividad | Ref. RYC-2016-20411, Región de Murcia | Ref. 21525/EE/21, Xunta de Galicia | Ref. ED401A-2020/084
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Do heavy metals affect bacterial communities more in small repeated applications or in a single large application?

  • Campillo Cora, Claudia
  • González Feijóo, Rocío
  • Arias Estévez, Manuel
  • Fernández Calviño, David
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, Heavy metals from anthropogenic sources accumulate slowly but steadily, leading to high metal concentration levels in soil. However, the effect of each heavy metal on soil bacterial communities is usually assessed in laboratories by a single application of individually spiked metals. We evaluated the differences between single individual application and repeated individual applications of Cr, Cu, Ni, Pb, and Zn on bacterial communities, through pollution-induced community tolerance (PICT), using bacterial growth as the endpoint (3H-leucine incorporation method). We found that PICT development was higher when soil was spiked in individual single application than individual repeated applications for Cu, Ni and Zn. In contrast, bacterial communities did not show different tolerance between singly or repeatedly when soil was spiked with Cr. In the case of Pb any increase of bacterial community tolerance to this metal was found despite high doses applied (up to 2000 mg kg����� 1). These results are relevant for the interpretation of the effects of heavy metals on soil microbes in order to avoid laboratory overestimations of the real effects of heavy metals on soil microbes., Ministerio de Economía e Competitividad | Ref. CTM2015-73422-JIN, Ministerio de Economía e Competitividad | Ref. RYC- 2016-20411, Xunta de Galicia | Ref. ED401A-2020/084
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Bacterial community tolerance to Cu in soils with geochemical baseline concentrations (GBCs) of heavy metals: Importance for pollution induced community tolerance (PICT) determinations using the leucine incorporation method

  • Campillo Cora, Claudia
  • Soto Gomez, Diego
  • Arias Estévez, Manuel
  • Bååth, Erland
  • Fernández Calviño, David
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, PICT (Pollution Induced Community Tolerance) to Cu is a useful and sensitive tool to assess the effects of Cu pollution in soils under laboratory conditions. However, in field situations, the absence of reference values, i.e. bacterial community tolerance to Cu baseline from non-polluted soils, make the method uncertain when we want to know if a soil is or is not polluted from a microbiological point of view. In order to shed some light on this topic, the PICT (Pollution Induced Community Tolerance) concept was used to determine the bacterial community tolerance to Cu in uncontaminated soils developed on five different parent materials, using log IC50 as a tolerance index. IC50 was calculated as the amount of Cu that inhibit 50% of bacterial growth (estimated via the leucine incorporation method) in a bacterial suspension extracted from soil. With physico-chemical soil characteristics and type of parent material, a linear multiple regression equation was fitted explaining 80% of the variance in log IC50 values. This equation provides a useful tool to estimate the bacterial community tolerance to Cu baseline in a soil using the general soil characteristics, allowing for the more general use of PICT without the need of reference soils., Ministerio de Economía y Competitividad | Ref. CTM2015-73422-JIN, Xunta de Galicia | Ref. ED431F 2018/06