Skip to main content

ESTRUCTURA INTERFACIAL Y REACTIVIDAD ELECTROQUIMICA

CTQ2016-76221-P

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2016
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Citrate adsorption on gold: Understanding the shaping mechanism of nanoparticles

  • Gisbert-González, José M.
  • Cheuquepán, William
  • Herrero, Enrique
  • Feliu, Juan M.
  • Ferre Vilaplana, Adolfo|||0000-0002-9032-9015
[EN] Advanced applications of colloidal nanoparticles (NPs) become to depend on their specific shape, which is controlled by the adsorption behavior of the capping agent involved in their synthesis. To understand the way in which citric acid determines the shape of gold NPs, the adsorption behavior of citrate on gold under the synthesis conditions is here investigated from electrochemical experiments on well-defined surfaces. Gibb excesses and charge numbers for the citrate adlayers deposited on the Au (111), Au(100) and Au(110) electrodes when a potential is applied were estimated at pHs 1 and 3. From these results, FTIR spectra and DFT calculations, it is concluded that solvated citrate can become simultaneously adsorbed through three dehydrogenated carboxylic groups in bidentate configuration on Au(111), but only through two on Au(100) and Au(110). As a result of this behavior, citrate can become more strongly adsorbed on Au(111) than on the other two basal planes of gold under the synthesis conditions, which would explain why tetrahedral and octahedral colloidal gold NPs are preferentially shaped when citric acid is used as the capping agent in water. This conclusion coincides with the previously one obtained on platinum, suggesting that the mechanism here described would operate also on other metals having fcc structure., This work has been financially supported by the MCINN-FEDER (Spain) through project CTQ2016-76221-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Why nitrogen favors oxygen reduction on graphitic materials

  • Ferre Vilaplana, Adolfo|||0000-0002-9032-9015
  • Herrero, Enrique
[EN] Nitrogen-doped graphitic materials as promising catalysts for the oxygen reduction reaction in fuel-cells have been mainly investigated under the graphitic versus pyridinic nitrogen-dopant dichotomy approach. However, we show here that the active sites, reaction mechanism, selectivity and even the origin of each behavior can be better understood when the stability of the possible active site and the eventual contribution of charge from the surface are considered separately. The roles in the reaction played by specific nitrogen-dopants, the hydrogenation of pyridinic nitrogen-dopants and the solvation effect are all clarified. The investigated activity is much more closely linked to the edges, where certain carbon atoms are sufficiently unstable or can be destabilized by means of adjacent nitrogen-dopants, and where reaction intermediates can be better relaxed, than to the presence of specific nitrogen-dopants. Unfortunately, high overpotentials and the undesired production of hydrogen peroxide appear to be unavoidable in the oxygen reduction to water on these materials., This work has been financially supported by the MINECO (Spain) project No. CTQ2016-76221-P
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Why the activity of the hydrogen oxidation reaction on platinum decreases as pH increases

  • Briega-Martos, Valentín
  • Herrero, Enrique
  • Feliu, Juan M.
  • Ferre Vilaplana, Adolfo|||0000-0002-9032-9015
[EN] Platinum is a very effective electrode for the hydrogen evolution and oxidation reactions (HER/HOR) in acidic media. However, the activity for the HOR on platinum falls two orders of magnitude from acidic to alkaline media, which has not been completely understood yet. Here, we provide an explanation for that. Both the HER and the HOR were investigated on the three basal planes of platinum in a pH range near neutral pH conditions in buffered solutions in the absence of anion specific adsorption for guaranteeing the protons availability. Whereas changes in the pH from acid to neutral values produced negligible effects on the HER, the HOR was found to be pH sensitive, even under near neutral pH conditions. From these results, it can be consistently reasoned that the drastic fall in the activity of the HOR on platinum from acidic to alkaline media is an effect of the charge on the electrode, which is more negative as the pH increases. With the aid of density functional theory calculations, kinetic arguments explaining the unfavorable effect that negative charge on the electrode has on the HOR are provided., This work was supported by the MCINN-FEDER (Spain) through Project CTQ2016-76221-P. V.B.-M. thankfully acknowledges to MINECO the award of a predoctoral grant (BES-2014-068176, Project CTQ2013-44803-P).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Why Citrate Shapes Tetrahedral and Octahedral Colloidal Platinum Nanoparticles in Water

  • Gisbert-González, J.M.
  • Feliu, Juan
  • Herrero, Enrique
  • Ferre Vilaplana, Adolfo|||0000-0002-9032-9015
[EN] The performance of many advanced catalytic systems depends not only on the size and composition but also on the specific shape of the metal nanoparticles (NPs) from which they are assembled. In turn, the shape of colloidal NPs depends on the specific capping agent involved in their synthesis, though the mechanism is still poorly understood. Here, supported by electrochemical experiments, Fourier transform infrared spectra, and density functional theory calculations, on well-defined surfaces, we show how a specific capping agent determines the shape of colloidal NPs. Solvated citrate can become simultaneously adsorbed on the Pt(111) surface through three dehydrogenated carboxylic groups, with each one of them in bidentate configuration. On the other two basal planes, citrate can be adsorbed through only two of them. For this reason, under the synthesis conditions, citrate is more favorably adsorbed on the Pt(111) than on the other two basal planes of platinum. This adsorption behavior explains why colloidal platinum NPs of tetrahedral and octahedral shape are produced when citrate is used as the capping agent in water. The mechanism for citrate would also determine the shape of other pure face-centered cubic metals and can inspire the engineering of future capping agents., This work has been financially supported by the MCINN-FEDER (Spain) through project CTQ2016-76221-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Formic acid oxidation on platinum electrodes: A detailed mechanism supported by experiments and calculations on well-defined surfaces

  • Ferre Vilaplana, Adolfo|||0000-0002-9032-9015
  • Perales, Juan Víctor
  • Buso-Rogero, Carlos
  • Feliu, Juan
  • Herrero, Enrique
[EN] In spite of the fact that the formic acid oxidation reaction on electrode surfaces has been extensively investigated, a detailed mechanism explaining all the available experimental evidence on platinum has not been yet described. Herein, using a combined experimental and computational approach, the key elements in the mechanism of the formic acid oxidation reaction on platinum have been completely elucidated, not only for the direct path, through an active intermediate, but also for the CO formation route. The experimental results suggest that the direct oxidation path on platinum takes place in the presence of bidentate adsorbed formate. However, the results reported here provide evidence that this species is not the active intermediate. Monodentate adsorbed formate, whose evolution to the much more favorable bidentate form would be hindered by the presence of neighboring adsorbates, has been found to be the true active intermediate. Moreover, it is found that adsorbed formic acid would have a higher acid constant than in solution, which suggests that adsorbed formate can be originated not only from solution formate but also from formic acid. The CO formation path on platinum can proceed, also from monodentate adsorbed formate, through a dehydrogenation process toward the surface, during which the adsorbate transitions from a Pt-O adsorption mode to a Pt-C one, to form carboxylate. From this last configuration, the C-OH bond is cleaved, on the surface, yielding adsorbed CO and OH. The results and mechanisms reported here provide the best explanation for the whole of the experimental evidence available to date about this reaction, including pH, surface structure and electrode potential effects., This work has been financially supported by the MCINN-FEDER (Spain) and Generalitat Valenciana (Feder) through projects CTQ2016-76221-P and PROMETEOII/2014/013, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The role of formic acid/formate equilibria in the oxidation of formic acid on Pt(111)

  • Busó-Rogero, Carlos
  • Herrero, Enrique
  • Feliu, Juan M.
  • Ferre Vilaplana, Adolfo|||0000-0002-9032-9015
[EN] The formic acid oxidation reaction has been studied in concentrated perchloric acid solutions (up to 9.14M (60%)) on the Pt (111) surface to explore the relationships between interfacial properties and kinetics. It is found that, as the concentration of perchloric acid in the supporting electrolyte increases, the current markedly decreases, making it possible to detect adsorbed formate on the surface by voltammetric methods. With the aid of DFT calculations, it is shown that the diminution in current is the result of two opposing factors: the reduction in the concentration of free formate in solution and electrode charge effects which encourage the adsorption of formate in a particular configuration. Additionally, the electrochemical behavior under highly acidic conditions suggests the formation of clathrate structures and emphasizes the relevance of the water structure effect in electrode adsorption processes., This work has been financially supported by the Ministerio de Economia, Industria y Competitividad through the project CTQ2016-76221-P. CBR also thanks his Postdoctoral fellowship to Generalitat Valenciana (APOSTD/2017/010).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

An Aza-Fused pi-Conjugated Microporous Framework Catalyzes the Production of Hydrogen Peroxide

  • Briega-Martos, V.
  • de la Peña, Alejandro
  • Segura, J.L.
  • Zamora, F.
  • Feliu, Juan
  • Herrero, Enrique
  • Ferre Vilaplana, Adolfo|||0000-0002-9032-9015
[EN] In order to produce hydrogen peroxide in small-scale electrochemical plants, selective catalysts for the oxygen reduction reaction (ORR) toward the desired species are required. Here, we report about the synthesis, characterization, ORR electrochemical behavior, and reaction mechanism of an aza-fused pi-conjugated microporous polymer, which presents high selectivity toward hydrogen peroxide. It was synthesized by polycondensation of 1,2,4,5-benzenetetramine tetrahydrochloride and triquinoyl octahydrate. A cobalt-modified version of the material was also prepared by a simple postsynthesis treatment with a Co(II) salt. The characterization of the material is consistent with the formation of a conductive robust porous covalent laminar polyaza structure. The ORR properties of these catalysts were investigated using rotating disk and rotating disk ring arrangements. The results indicate that hydrogen peroxide is almost exclusively produced at very low overpotentials on these materials. Density functional theory calculations provide key elements to understand the reaction mechanism. It is found that, at the relevant potential for the reaction, half of the nitrogen atoms of the material would be hydrogenated. This hydrogenation process would destabilize some carbon atoms in the lattice and would provide segregated charge. On the destabilized carbon atoms, molecular oxygen would be chemisorbed with the aid of charge transferred from the hydrogenated nitrogen atoms and solvation effects. Due to the low destabilization of the carbon sites, the resulting molecular oxygen chemisorbed state, which would have the characteristics of a superoxide species, would be only slightly stable, promoting the formation of hydrogen peroxide., This work has been financially supported by the MCINN-FEDER (projects CTQ2016-76221-P, MAT2013-46753-C2-1-P, and MAT2014-52305-P) and Generalitat Valenciana (project PROMETEO/2014/013).