Skip to main content

CONTROL AVANZADO Y APRENDIZAJE DE ROBOTS EN OPERACIONES DE TRANSPORTE

DPI2016-81002-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2016
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Design and Manufacturing of an Ultra-Low-Cost Custom Torque Sensor for Robotics

  • Pérez-Ubeda, Rodrigo Alonso
  • Gutiérrez, S. C.|||0000-0002-9106-9120
  • Zotovic Stanisic, Ranko|||0000-0002-4746-2101
  • Perles, Angel|||0000-0002-5782-4284
[EN] This article describes a new, very low-cost torque sensor. It was designed to obtain a geometric shape suitable for very affordable manufacturing by machining. The torque sensor was developed under the principle of measurement by strain gauges. It has been designed in order to make manufacturing operations as simple as possible. Optimization was achieved through finite element analysis. Three test sensors for 1, 5, and 20 Nm were designed and machined. Calibration of the three sensors has been carried out obtaining excellent results. An analysis of the dimensional quality of the product and associated costs demonstrates that manufacturing is possible with very simple machining operations, standard tools, and economic equipment, The authors are grateful for the financial support of the Spanish Ministry of Economy and European Union, grant DPI2016-81002-R (AEI/FEDER, UE).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Subspace-Based Takagi-Sugeno Modeling for Improved LMI Performance

  • Robles-Ruiz, Ruben
  • Bernal Reza, Miguel Ángel
  • Gonzalez-German, Ivan Temoatzin
  • Sala, Antonio|||0000-0002-5691-8772
[EN] Given a nonlinear system, the sector-nonlinearity methodology provides a systematic way of transforming it in an equivalent Takagi-Sugeno (T-S) model. However, such transformation is not unique: conservatism of shape-independent performance conditions in the form of linear matrix inequalities results in some models yielding better results than others. This paper provides some guidelines on choosing a sector-nonlinearity T-S model, with provable optimality (in a particular sense) in the case of quadratic nonlinearities. The approach is based on Hessian and restrictions of a function onto a subspace., This work was supported by the following institutions: Project Ciencia Basica SEP-CONACYT CB-168406, Project DPI2016-81002, (Spanish government, MINECO), Grant PROMETEOII/2013/004 (Generalitat Valenciana) and, the Scholarship GRISOLIA/2014/006.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A linear programming methodology for approximate dynamic programming

  • Diaz, Henry
  • Sala, Antonio|||0000-0002-5691-8772
  • Leopoldo Armesto|||0000-0003-0979-4428
[EN] The linear programming (LP) approach to solve the Bellman equation in dynamic programming is a well-known option for finite state and input spaces to obtain an exact solution. However, with function approximation or continuous state spaces, refinements are necessary. This paper presents a methodology to make approximate dynamic programming via LP work in practical control applications with continuous state and input spaces. There are some guidelines on data and regressor choices needed to obtain meaningful and well-conditioned value function estimates. The work discusses the introduction of terminal ingredients and computation of lower and upper bounds of the value function. An experimental inverted-pendulum application will be used to illustrate the proposal and carry out a suitable comparative analysis with alternative options in the literature., The authors are grateful for the financial support of the Spanish Ministry of Economy and the European Union, grant DPI2016-81002-R (AEI/FEDER, UE), and the PhD grant from the Government of Ecuador (SENESCYT).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Shape-independent model predictive control for Takagi-Sugeno fuzzy systems

  • Ariño-Latorre, Carlos Vicente
  • Querol-Ferrer, Andrés
  • Sala, Antonio|||0000-0002-5691-8772
[EN] Predictive control of TS fuzzy systems has been addressed in prior literature with some simplifying assumptions or heuristic approaches. This paper presents a rigorous formulation of the model predictive control of TS systems, so that results are valid for any membership value (shape-independent) with a suitable account of causality (control can depend on current and past memberships and state). As in most fuzzy control results, a family of progressively better controllers can be obtained by increasing Polya-related complexity parameters, generalising over prior proposals. (C) 2017 Elsevier Ltd. All rights reserved., The authors are grateful to the financial support of Spanish Ministry of Economy and European Union, grant DPI2016-81002-R (AEI/FEDER, UE), and grant P11B2015-36 (Universitat Jaume I).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Piecewise-Takagi-Sugeno asymptotically exact estimation of the domain of attraction of nonlinear systems

  • Gonzalez-German, Ivan Temoatzin
  • Bernal Reza, Miguel Ángel
  • Robles-Ruiz, Ruben
  • Sala, Antonio|||0000-0002-5691-8772
[EN] This report generalises recent results on stability analysis and estimation of the domain of attraction of nonlinear systems via exact piecewise affine Takagi Sugeno models. Algorithms in the form of linear matrix inequalities are proposed that produce progressively better estimates which are proved to asymptotically render the actual domain of attraction; regions already proven to belong to such domain of attraction can be removed and the estimate can contain significant portions of the modelling region boundary; in this way, level-set approaches in prior literature can be significantly improved. Illustrative examples and comparisons are provided. (C) 2016 The Franklin Institute. Published by Elsevier Ltd. All rights reserved., The authors gratefully acknowledge the support of the following institutions: Project Ciencia Basica SEP-CONACYT CB-168406, the CONACyT/COECYT Sonora scholarship 383252, project DPI2016-81002-R (Spanish government, MINECO), and the scholarship GRISOLIA/2014/006 from Generalitat Valenciana (regional government).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A generalised integral polynomial Lyapunov function for nonlinear systems

  • Gonzalez-German, Ivan Temoatzin
  • Bernal Reza, Miguel Ángel
  • Sala, Antonio|||0000-0002-5691-8772
[EN] This work generalises the line-integral Lyapunov function in (Rhee and Won, 2006) for stability analysis of continuous-time nonlinear models expressed as fuzzy systems. The referred result applied only to Takagi¿Sugeno representations, and required memberships to be a tensor-product of functions of a single state; these are generalised here so that membership arguments can be arbitrary polynomials of the state variables; in this way, systems for which earlier results cannot be applied are now covered. Both the modelling and the integral terms appearing in the Lyapunov functions are generalised to a fuzzy polynomial case. Illustrative examples show the advantage of the proposed method against previous literature, even in the TS case., The authors gratefully to the financial support of Spanish ministry of Economy and European Union, grant DPI2016-81002-R (AEI/FEDER, UE), the CONACyT/COECyT Sonora scholarship 383252, and Project ITSON-PROFAPI-CA 2017-0088.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Asymptotically exact stabilisation for constrained discrete Takagi-Sugeno systems via set-invariance

  • Ariño-Latorre, Carlos Vicente
  • Pérez Soler, Emilio
  • Bedate Boluda, Fernando
  • Querol-Ferrer, Andrés
  • Sala, Antonio|||0000-0002-5691-8772
[EN] Given a Takagi-Sugeno (TS) system, this paper proposes a novel methodology to obtain the state feedback controller guaranteeing, asymptotically as a Polya-related complexity parameter grows, the largest (membership-shape independent) possible domain-of-attraction with contraction-rate performance lambda, based on polyhedral lambda-contractive sets from constrained linear systems literature. The resulting controller is valid for any realisation of the memberships, as usual in most TS literature. For a finite complexity parameter, an inner estimate of such largest set is obtained; the frontier of such approximation can be understood as the level set of a polyhedral control-Lyapunov function. Convergence of a proposed iterative algorithm is asymptotically necessary and sufficient for TS system stabilisation: for a high-enough value of the complexity parameter, any conceivable shape-independent Lyapunov controller design procedure will yield a proven domain of attraction smaller or equal to the algorithm's output. (C) 2016 Elsevier B.V. All rights reserved., This work has been supported by grants DPI2015-70433- P and DPI2016-81002-R, from Spanish Government (MINECO) and grant PROMETEOII/2013/004 from Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Asynchronous Sensor Fusion of GPS, IMU and CAN-Based Odometry for Heavy-Duty Vehicles

  • Girbes-Juan, Vicent
  • Hernandez-Ferrandiz, Daniel
  • Leopoldo Armesto|||0000-0003-0979-4428
  • Dols Ruiz, Juan Francisco|||0000-0003-1815-1360
  • Sala, Antonio|||0000-0002-5691-8772
[EN] In heavy-duty vehicles, multiple signals are available to estimate the vehicle's kinematics, such as Inertial Measurement Unit (IMU), Global Positioning System (GPS) and linear and angular speed readings from wheel tachometers on the internal Controller Area Network (CAN). These signals have different noise variance, bandwidth and sampling rate (being the latter, possibly, irregular). In this paper we present a non-linear sensor fusion algorithm allowing asynchronous sampling and non-causal smoothing. It is applied to achieve accuracy improvements when incorporating odometry measurements from CAN bus to standard GPS+IMU kinematic estimation, as well as the robustness against missing data. Our results show that this asynchronous multi-sensor (GPS+IMU+CAN-based odometry) fusion is advantageous in low-speed manoeuvres, improving accuracy and robustness to missing data, thanks to non-causal filtering. The proposed algorithm is based on Extended Kalman Filter and Smoother, with exponential discretization of continuous-time stochastic differential equations, in order to process measurements at arbitrary time instants; it can provide data to subsequent processing steps at arbitrary time instants, not necessarily coincident with the original measurement ones. Given the extra information available in the smoothing case, its estimation performance is less sensitive to the noise-variance parameter setting, compared to causal filtering. Working Matlab code is provided at the end of this work., This research was supported in part by the Agencia Espanola de Investigacion (European Union) under Grants PID2020-116585GB-I00 and PID2020-118071GB-I00, and in part by the Generalitat Valenciana under Grant GV/2021/074. The review of this article was coordinated by Dr. Sohel Anwar. (Corresponding author: Vicent Girbes-Juan.)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Stability analysis of LPV systems: Scenario approach

  • Sala, Antonio|||0000-0002-5691-8772
[EN] This paper discusses a `scenario¿ approach to prove decay-rate stability of discrete-time polytopic linear parameter-varying systems, dealing with sets of sequences of vertex models of different length. When all sequences have the same length, parameter-trajectory dependent results in earlier literature are obtained as particular cases. The approach in this paper discusses `classical¿ stability, without the need of probabilistic ingredients present in other scenario-based ideas in literature. A numerical example shows that the proposal achieves a sensible tradeoff between proven performance and computing requirements., The author is grateful to Ministerio de Economia (Spain) and European Union, grant DPI2016-81002-R The material in this paper was not presented at any conference. This paper was recommended for publication in revised form by Associate Editor Tingshu Hu under the direction of Editor Andre L. Tits.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Drive Force and Longitudinal Dynamics Estimation in Heavy-Duty Vehicles

  • Girbés, Vicent
  • Hernández, Daniel
  • Leopoldo Armesto|||0000-0003-0979-4428
  • Dols Ruiz, Juan Francisco|||0000-0003-1815-1360
  • Sala, Antonio|||0000-0002-5691-8772
[EN] Modelling the dynamic behaviour of heavy vehicles, such as buses or trucks, can be very useful for driving simulation and training, autonomous driving, crash analysis, etc. However, dynamic modelling of a vehicle is a difficult task because there are many subsystems and signals that affect its behaviour. In addition, it might be hard to combine data because available signals come at different rates, or even some samples might be missed due to disturbances or communication issues. In this paper, we propose a non-invasive data acquisition hardware/software setup to carry out several experiments with an urban bus, in order to collect data from one of the internal communication networks and other embedded systems. Subsequently, non-conventional sampling data fusion using a Kalman filter has been implemented to fuse data gathered from different sources, connected through a wireless network (the vehicle¿s internal CAN bus messages, IMU, GPS, and other sensors placed in pedals). Our results show that the proposed combination of experimental data gathering and multi-rate filtering algorithm allows useful signal estimation for vehicle identification and modelling, even when data samples are missing., This research was funded by the Spanish Ministry of Economy and European Union, grant DPI2016-81002-R, by Generalitat Valenciana, grant APOSTD/2017/055, and by the European Union too through the European Social Fund (ESF). The authors want to acknowledge public transport operators Autos Vallduxense S.L. and EMT Valencia for their support to the project by lending their vehicles and bus drivers. The authors are also thankful to Instituto de Diseño y Fabricación and SAFETRANS project (DPI2013-42302-R) research teams, for lending most of the electronic devices and sensors used in the experimentation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Performance-oriented quasi-LPV modeling of nonlinear systems

  • Robles, Ruben
  • Bernal, Miguel
  • Sala, Antonio|||0000-0002-5691-8772
[EN] Polytopic quasi¿linear parameter¿varying (quasi¿LPV) models of nonlinear processes allow the usage linear matrix inequalities (LMIs) to guarantee some performance goal on them (in most cases, locally, over a so¿called modeling region). In order to get a finite number of LMIs, nonlinearities are embedded on the convex hull of a finite set of linear models. However, for a given system, the quasi¿LPV representations are not unique, yielding different performance bounds depending on the model choice. To avoid such drawback, earlier literature on the topic used annihilator¿based approaches, which require gridding on the modeling region, and nonconvex BMI conditions for controller synthesis; optimal performance bounds are obtained, but with a huge computational burden. This paper proposes building a model by minimizing the projection of the nonlinearities onto directions, which are deleterious for performance. For a small modeling region, these directions are obtained from LMIs with the linearized model. Additionally, these directions will guide the selection of the polytopic embedding's vertices. The procedure allows gridding¿free LMI controller synthesis, as in standard LPV setups, with a very reduced performance loss with respect to the aforementioned BMI+gridding approaches, at a fraction of the computational cost., Spanish ministry of Economy and European Union (AEI/FEDER, UE), Grant/Award Number: DPI2016-81002-R; Generalitat Valenciana, Grant/Award Number: GRISOLIA/2014/006; Instituto Tecnologico de Sonora (ITSON), Grant/Award Number: ITSON PFCE 2017-18 and PROFAPI CA-18 ITSON 2018-1062
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Force Control Improvement in Collaborative Robots through Theory Analysis and Experimental Endorsement

  • Pérez-Ubeda, Rodrigo
  • Zotovic Stanisic, Ranko|||0000-0002-4746-2101
  • Gutiérrez, S. C.|||0000-0002-9106-9120
[EN] Due to the elasticity of their joints, collaborative robots are seldom used in applications with force control. Besides, the industrial robot controllers are closed and do not allow the user to access the motor torques and other parameters, hindering the possibility of carrying out a customized control. A good alternative to achieve a custom force control is sending the output of the force regulator to the robot controller through motion commands (inner/outer loop control). There are different types of motion commands (e.g., position or velocity). They may be implemented in different ways (Jacobian inverse vs. Jacobian transpose), but this information is usually not available for the user. This article is dedicated to the analysis of the effect of different inner loops and their combination with several external controllers. Two of the most determinant factors found are the type of the inner loop and the stiffness matrix. The theoretical deductions have been experimentally verified on a collaborative robot UR3, allowing us to choose the best behaviour in a polishing operation according to pre-established criteria., The authors are grateful for the financial support of the Spanish Ministry of Economy and European Union, grant DPI2016-81002-R (AEI/FEDER, UE), to the research work here published. Rodrigo Perez-Ubeda is grateful to the Ph.D. Grant CONICYT PFCHA/DOCTORADO BECAS CHILE/2017-72180157.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Fitted Q-Function Control Methodology Based on Takagi-Sugeno Systems

  • Diaz-Iza, Henry Paul
  • Leopoldo Armesto|||0000-0003-0979-4428
  • Sala, Antonio|||0000-0002-5691-8772
[EN] This paper presents a combined identification/ Q-function fitting methodology that involves identification of a Takagi-Sugeno model, computation of (sub)optimal controllers from linear matrix inequalities (LMIs), and subsequent data-based fitting of the Q-function via monotonic optimization. The LMI-based initialization provides a conservative solution, but it is a sensible starting point to avoid convergence/local-minima issues in raw data-based fitted Q-iteration or Bellman residual minimization. An inverted-pendulum experimental case study illustrates the approach., This work was supported in part by the Spanish Ministry of Economy and European Union (AEI/FEDER, UE) under Grant DPI2016-81002-R and in part by the Government of Ecuador through the Ph.D. Grant SENESCYT.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Constraint-aware learning of policies by demonstration

  • Leopoldo Armesto|||0000-0003-0979-4428
  • Sala, Antonio|||0000-0002-5691-8772
  • Moura, Joao
  • Ivan, Vladimir
  • Erden, Mustafa Suphi
  • Vijayakumar, Sethu
[EN] Many practical tasks in robotic systems, such as cleaning windows, writing, or grasping, are inherently constrained. Learning policies subject to constraints is a challenging problem. In this paper, we propose a method of constraint-aware learning that solves the policy learning problem using redundant robots that execute a policy that is acting in the null space of a constraint. In particular, we are interested in generalizing learned null-space policies across constraints that were not known during the training. We split the combined problem of learning constraints and policies into two: first estimating the constraint, and then estimating a null-space policy using the remaining degrees of freedom. For a linear parametrization, we provide a closed-form solution of the problem. We also define a metric for comparing the similarity of estimated constraints, which is useful to pre-process the trajectories recorded in the demonstrations. We have validated our method by learning a wiping task from human demonstration on flat surfaces and reproducing it on an unknown curved surface using a force- or torque-based controller to achieve tool alignment. We show that, despite the differences between the training and validation scenarios, we learn a policy that still provides the desired wiping motion., The author(s) disclosed receipt of the following financial support for the research, auth/orship, and/or publication of this article: This work was supported by the Spanish Ministry of Economy and the European Union (grant number DPI2016-81002-R (AEI/FEDER, UE)), the European Union Horizon 2020, as part of the project Memory of Motion - MEMMO (project ID 780684), and the Engineering and Physical Sciences Research Council, UK, as part of the Robotics and AI hub in Future AI and Robotics for Space - FAIR-SPACE (grant number EP/R026092/1), and as part of the Centre for Doctoral Training in Robotics and Autonomous Systems at Heriot-Watt University and the University of Edinburgh (grant numbers EP/L016834/1 and EP/J015040/1)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Metodología de programación dinámica aproximada para control óptimo basada en datos, Approximate Dynamic Programming Methodology for Data-based Optimal Controllers

  • Díaz, Henry
  • Leopoldo Armesto|||0000-0003-0979-4428
  • Sala, Antonio|||0000-0002-5691-8772
[EN] In this article, we present a methodology for learning data-based approximately optimal controllers, within the context of learning and approximate dynamic programming. There are previous solutions in dynamic programming that use linear programming in discrete state space, but cannot be applied directly to continuous space. The objective of the methodology is to calculate data-based optimal controllers for continuous state space, these controllers are obtained by a lower estimation of the accumulated cost through functional approximators with linear parameterization. This is solved non-iteratively with linear programming, but it requires to provide appropriate conditions for regressor regularization and to introduce a cost of leaving the region with valid data, in order to obtain satisfactory results (avoiding unrestricted or poorly conditioned solutions)., [ES] En este artículo se presenta una metodología para el aprendizaje de controladores óptimos basados en datos, en el contexto de la programación dinámica aproximada. Existen soluciones previas en programación dinámica que utilizan programación lineal en espacios de estado discretos, pero que no se pueden aplicar directamente a espacios continuos. El objetivo de la metodología es calcular controladores óptimos para espacios de estados continuos, basados en datos, obtenidos mediante una estimación inferior del coste acumulado a través de aproximadores funcionales con parametrización lineal. Esto se resuelve de forma no iterativa con programación lineal, pero requiere proporcionar las condiciones adecuadas de regularización de regresores e introducir un coste de abandono de la región con datos válidos, con el fin de obtener resultados satisfactorios (evitando soluciones no acotadas o mal condicionadas)., Agradecemos al Ministerio de Economía de España, la Unión Europea DPI2016-81002-R (AEI/FEDER, UE), y al Gobierno de Ecuador (Beca SENESCYT) la financiación recibida para la línea de investigación objeto de este trabajo.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Design and manufacturing of a protoype of a lightweight robot arm

  • Gutiérrez, S. C.|||0000-0002-9106-9120
  • Zotovic Stanisic, Ranko|||0000-0002-4746-2101
  • Navarro-Mas, M.D.|||0000-0003-2022-8857
  • Meseguer, Maria-Desamparados|||0000-0003-0254-7993
[EN] The aim of this work is to manufacture a prototype of a lightweight robot arm with a low cost budget, fully functional. This prototype is used to test and fix the elements for driving and controlling. During the development process, several tests and studies were performed, such as, strength simulations, dimensional effects after a post-process treatment with acetone, adjustment of control parameters to improve the accuracy, testing of behaviour of transmissions, etc. The prototype must have a low weight overall and a right operation. The results and conclusions, related with material, reinforcements, geometry/shape of the parts, etc., become recommendations for the manufacture of the final lightweight robot arm. The one that will not be prototype., The authors are grateful to the financial support of Spanish Ministry of Economy and European Union, grant DPI2016-81002-R (AEI/FEDER, UE).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Study of the application of a collaborative robot for machining tasks

  • Pérez-Ubeda, R.
  • Gutiérrez, S. C.|||0000-0002-9106-9120
  • Zotovic Stanisic, Ranko|||0000-0002-4746-2101
  • Lluch-Cerezo, Joaquín|||0000-0003-1973-0188
[EN] The importance of collaborative robots is increasing very fast in the industry. They have several advantages over the 'classical' robot arms: they may work side-by-side with humans, their environment needs less adaptation, they may be easily transported, etc. Their joints are more elastic than those in classical robots. For this reason, they are less suited for machining. In this work, a collaborative robot, a sensor of 6 Degree of Freedom (DOF) and a spindle with flex-shaft attachment are used to perform milling operations on soft materials. An inner/outer loop control is being developed to control the movements and the cutting forces. The experiments have been designed to evaluate the capability of the robot with milling operations with different parameters. An analysis of the dimensions and the finished surface will be carried out. The contribution of this article is to determine the possibilities and limitations of the collaborative robots in machining applications, with external control of forces., The authors are grateful for the financial support of the Spanish Ministry of Economy and European Union, grant DPI2016-81002-R (AEI/FEDER, UE). This work was funded by the CONICYT PFCHA/DOCTORADO BECAS CHILE/2017 - 72180157
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Clothoid-Based Three-Dimensional Curve for Attitude Planning

  • Girbés, Vicent
  • Vanegas, Gloria
  • Leopoldo Armesto|||0000-0003-0979-4428
This work was supported by Generalitat Valenciana under the postdoctoral grant APOSTD/2017/055. The authors are also grateful to the financial support of Spanish Ministry of Economy and European Union, grant DPI2016-81002-R (AEI/FEDER, UE). Thanks to Sergio Garcia-Nieto and Franklin Samaniego for their help to setup the simulator.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Optimisation of transient and ultimate inescapable sets with polynomial boundaries for nonlinear systems

  • Sala, Antonio|||0000-0002-5691-8772
  • Pitarch, José Luis
[EN] This paper addresses the problem of bounding the trajectories of nonlinear systems (transient and ultimate bounds) from initial conditions in given sets, when subject to possibly nonvanishing disturbances constrained by some finite-interval integral bounds, with a suitable controller. The so-called robustly inescapable sets are determined from such initial conditions and disturbance bounds. In order to get numerical results, the approach considers embedding the nonlinear dynamics in a convex combination of polynomials, and solving sum-of-squares (SOS) problems on them, optimising some inescapable-set size parameters. Determination of approximate (locally) optimal solutions usually requires an iterative evaluation of SOS problems, because of products of decision variables. (C) 2016 Elsevier Ltd. All rights reserved., The research leading to these results has received funding from the European Union (FP7/2007-2013 no 604068) and from the Spanish Government (MINECO/FEDER DPI2015-70975-P, DPI2016-81002). The material in this paper was not presented at any conference. This paper was recommended for publication in revised form by Associate Editor Graziano Chesi under the direction of Editor Richard Middleton.