Skip to main content

CONTROL AVANZADO DE SISTEMAS MULTIBUS CC EMBARCADOS EN AUTOMOVILES

DPI2017-85404-P

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 32
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Herramientas para la docencia de control digital en grados de ingeniería, Tools for teaching digital control in engineering degrees

  • Lerma, E.
  • Costa-Castelló, R.
  • Griñó, R.
  • Sanchis, C.
[EN] This work describes a set of teaching materials that have been developed to support the learning of digital control. In particular, it presents a set of interactive tools and the project Duino-Based Learning (DBL) that has been designed to develop experimental practices of digital control using Arduino. In addition, the paper depicts the contents of a digital control course, taught in the framework of an industrial engineering degree, and how the developed tools are used in its teaching., [ES] En este trabajo se describen un conjunto de materiales pedagógicos que han sido desarrollados para dar soporte a la docencia del control digital. En particular, se presentan un conjunto de herramientas interactivas y el proyecto Duino-Based Learning (DBL) pensado para desarrollar prácticas experimentales de control digital utilizando Arduino. Además, se describe el contenido de un curso de control digital, que  se imparte en el marco de una titulación de ingeniería industrial, y como se utilizan las diferentes herramientas desarrolladas en su docencia., El trabajo de E. Lerma ha sido financiado por la donación de Mathworks UPC-I-01523. El trabajo de R. Griñó ha sido parcialmente financiado por el Gobierno de España a través de la Agencia Estatal de Investigación Proyecto DPI2017-85404-P, la Generalitat de Catalunya a través del Proyecto 2017 SGR 872 y la donación de Mathworks UPC-I-01523. El trabajo de R. Costa-Castelló ha sido parcialmente financiado por el Gobierno de España a través de la Agencia Estatal de Investigación Proyecto DOVELAR ref. RTI2018-096001-B-C32 (MCIU/AEI/FEDER, UE) y “María de Maeztu Seal of Excellence to IRI” (MDM-2016-0656), la Generalitat de Catalunya a través del Proyecto 2017 SGR 482 y la donación de Mathworks UPC-I-01523.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On teaching digital control systems in a generic engineering degree

  • Lerma, Eneko
  • Costa Castelló, Ramon
  • Griñó, Robert
  • Sanchis, Carlos
  • Dormido, Sebastián
Trabajo presentado en el 12th IFAC Symposium on Advances in Control Education ACE , celebrado en Philadelphia, Pennsylvania (Estados Unidos), del 7 al 9 de julio de 2019, In this work, the subject of digital control taught in a generic engineering degree is described. In particular, the contents of the course, the experimental environment and the interactive tools used in teaching are discussed. This work collects the teaching experience obtained during the past twenty years by the teaching team of this subject at the Barcelona School of Industrial Engineering of the Universitat Politecnica de Catalunya., The work of R. Costa-Castello was partially supported by the Government of Spain through the Agencia Estatal de Investigacion projects DPI2015-69286-C3-2-R and Marıa de Maeztu Seal of Excellence to IRI (MDM-2016-0656), by the Generalitat de Catalunya through the Project 2017 SGR 482 and by the donation of Mathworks UPC-I-01523. The work of R. Griño was partially supported by the Government of Spain through the Agencia Estatal de Investigaci´on Project DPI2017-85404-P, by the Generalitat de Catalunya through the Project 2017 SGR 872 and by the donation of Mathworks UPC-I-01523. The work of E. Lerma was partially supported by the donation of Mathworks UPC-I-01523. The work of S. Dormido was partially supported by the Government of Spain through the Agencia Estatal de Investigacion projects DPI2017-84259-C2-2-R.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Current-limited suboptimal sliding mode control for voltage-regulated synchronous buck converters

  • Ramos Lara, Rafael Ramón|||0000-0001-6363-7250
  • Repecho del Corral, Víctor|||0000-0003-0584-5443
  • Biel Solé, Domingo|||0000-0002-0364-7681
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This paper proposes a new sliding mode control based on a non-linear switching surface that provides a suboptimal current-limited start-up response in step-down converters. The main idea behind the design consists in combining different switching surfaces. The first one forces the system trajectories to track a constant current path until the output voltage error is small. A non-singular terminal switching surface then drives the trajectories to the vicinity of the steady state operating point. Finally, a first order switching surface regulates the steady state providing very good rates of load and line regulation. The paper presents the design guidelines of the suboptimal sliding mode control and the experimental evaluation that confirms the effectiveness of the proposal., This work was partially supported by the Government of Spain through the Agencia Estatal de Investigacion´ Project DPI2017-85404-P and by the Generalitat de Catalunya through the Project 2017 SGR 872., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Comprehensive high speed automotive SM-PMSM torque control stability analysis including novel control approach

  • Arias Pujol, Antoni|||0000-0002-5424-5981
  • Ibarra Basabe, Edorta
  • Trancho, Elena
  • Griñó Cubero, Robert|||0000-0001-6045-4600
  • Kortabarria, Iñigo
  • Caum Aregay, Jesús|||0000-0001-7042-2768
Permanent magnet synchronous machines (PMSM) are widely used in the automotive industry for electric vehicle (EV) and hybrid electric vehicle (HEV) propulsion systems, where the trend is to achieve high mechanical speeds. High speeds inevitably imply high current electrical frequencies, which can lead to a lack of controllability when using field oriented control (FOC) due to sampling period constraints. In this work, a comprehensive discrete-time model is fully developed to assess the stability issues in the widely used FOC. A speed-adaptive control structure that overcomes these stability problems and extends the speed operation range of the PMSM is presented. Also, a numerical methodology from which the maximum operating stable frequency can be computed in advance of any experimentation, is developed. All contributions are accompanied and supported by numerical results obtained from an accurate MATLAB/Simulink model., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

A behavioural dynamic model for constant power loads in single-phase AC systems

  • Griñó Cubero, Robert|||0000-0001-6045-4600
  • Ortega, Romeo
  • Fridman, Emilia
  • Zhang, Jin|||0000-0003-2460-0396
  • Mazenc, Frédéric
Constant power loads (CPLs) in power systems have a destabilizing effect that gives rise to significant oscillations or to network collapse, motivating the development of new methods to analyse their effect in AC and DC power systems. A sine qua non condition for this analysis is the availability of a suitable mathematical model for the CPL. In the case of DC systems power is simply the product of voltage and current, hence a CPL corresponds to a first–third quadrant hyperbola in the loads voltage–current plane. The same approach is applicable for balanced three-phase systems that, after a rotation of the coordinates to the synchronous frame, can be treated as a DC system. Modelling CPLs for single-phase (or unbalanced poly-phase) AC systems, on the other hand, is a largely unexplored area because in AC systems (active and reactive) power involves the integration in a finite window of the product of the voltage and current signals. In this paper we propose a simple dynamic model of a CPL that is suitable for the analysis of single-phase AC systems. We give conditions on the tuning gains of the model that guarantee the CPL behaviour is effectively captured., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Herramientas para la docencia de control digital en grados de ingeniería, Tools for teaching digital control in engineering degrees

  • Lerma Macaya, Eneko
  • Costa Castelló, Ramon|||0000-0003-2553-5901
  • Griñó Cubero, Robert|||0000-0001-6045-4600
  • Sanchis, Carlos
En este trabajo se describen un conjunto de materiales pedagógicos que han sido desarrollados para dar soporte a la docencia del control digital. En particular, se presentan un conjunto de herramientas interactivas y el proyecto Duino-Based Learning (DBL) pensado para desarrollar prácticas experimentales de control digital utilizando Arduino. Además, se describe el contenido de un curso de control digital, que  se imparte en el marco de una titulación de ingeniería industrial, y como se utilizan las diferentes herramientas desarrolladas en su docencia., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

An adaptive observer-based controller design for active damping of a DC network with a constant power load

  • Machado, Juan E.
  • Ortega, Romeo
  • Astolfi, Alessandro
  • Arocas Pérez, José|||0000-0002-8633-8402
  • Pyrkin, Anton A.
  • Bobtsov, Alexey
  • Griñó Cubero, Robert|||0000-0001-6045-4600
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This article explores a nonlinear, adaptive controller aimed at increasing the stability margin of a direct-current (dc), small-scale, electrical network containing an unknown constant power load (CPL). Due to its negative incremental impedance, this load reduces the effective damping of the network, which may lead to voltage oscillations and even to voltage collapse. To overcome this drawback, we consider the incorporation of a controlled dc-dc power converter in parallel with the CPL. The design of the control law for the converter is particularly challenging due to the existence of unmeasured states and unknown parameters. We propose a standard input-output linearization stage, to which a suitably tailored adaptive observer is added. The good performance of the controller is validated through experiments on a small-scale network., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Multicellular feedback control of a genetic toggle-switch in microbial consortia

  • Fiore, Davide
  • Salzano, Davide
  • Cristòbal-Cóppulo, Enric
  • Olm Miras, Josep Maria|||0000-0003-4925-9251
  • di Bernardo, Mario
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., We describe a multicellular approach to control a target cell population endowed with a bistable toggle-switch. The idea is to engineer a synthetic microbial consortium consisting of three different cell populations. In such a consortium, two populations, the Togglers, responding to some reference input, can induce the switch of a bistable memory mechanism in a third population, the Targets, so as to activate or deactivate some additional functionalities in the cells. Communication among the three populations is established by orthogonal quorum sensing molecules that are used to close a feedback control loop across the populations. The control design is validated via in-silico experiments in BSim, a realistic agent-based simulator of bacterial populations.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Comparison of first- and second-order sliding-mode controllers for a dc-dc dual active bridge

  • Dòria Cerezo, Arnau|||0000-0001-9352-066X
  • Serra, Federico
  • Esteban, Francisco Daniel
  • Biel Solé, Domingo|||0000-0002-0364-7681
  • Griñó Cubero, Robert|||0000-0001-6045-4600
This paper compares four sliding-mode control strategies for a dual active bridge. The proposed control algorithms define different switching functions resulting in first-and second-order controllers, and using both discontinuous and continuous sliding-mode algorithms. The paper details the design stage and includes simulation and experimental tests to better compare the performance for each control scheme., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Open loop testing for optimizing the closed loop operation of chemical systems

  • Domínguez Pumar, Manuel|||0000-0001-5439-7953
  • Olm Miras, Josep Maria|||0000-0003-4925-9251
  • Kowalski, Lukasz
  • Jiménez Serres, Vicente|||0000-0001-5668-7049
© <2020>. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, One way to optimize the operation of chemical systems consists on using closed loop controls while the system is operated. This way, it is possible to optimize the operating point in the plant, process or chemical system so that certain quantities are maximized/minimized or time responses are reduced. In the design of the closed loop controls, though, one of the problems is the large number of configuration parameters involved and the uncertainties in the system. The objective of this paper is to present how recently proposed controls, exploiting time-scale separation, allow to configure their closed loop configuration parameters from open-loop measurements. These controls have been proposed to accelerate the time response of metal-oxide gas sensors by operating at constant surface potential. The main result of the paper explains the link between the open loop measurements and closed loop operation. Experiments are provided using a commercial off-the-shelf Microelectromechanical gas sensor., The work of M. Dominguez-Pumar, L. Kowalski and V. Jimenez was partially supported by the Government of Spain through the Agencia Estatal de Investigación Projects ESP2016-79612-C3-2-R and RTI2018-098728-B-C33 and by the Generalitat de Catalunya through the Project 2017 SGR 279. The work of J.M. Olm was partially supported by the Government of Spain through the Agencia Estatal de Investigación Project DPI2017-85404-P and by the Generalitat de Catalunya through the Project 2017 SGR 872., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Three-phase phase-locked loop algorithms based on sliding modes

  • Dòria Cerezo, Arnau|||0000-0001-9352-066X
  • Repecho del Corral, Víctor|||0000-0003-0584-5443
  • Biel Solé, Domingo|||0000-0002-0364-7681
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This article proposes a family of phase-locked loop schemes based on sliding modes. The use of sliding mode algorithms ensures fast response and global stability. In particular, two new algorithms are presented, both based on a complex framework for representing three-phase signals. This article compares the obtained algorithms with the traditional schemes, and a faster response is obtained when sliding modes are used. Additionally, as an application example, the algorithm is combined with a complex-coefficient filter that allows an easy identification of both positive and negative sequence harmonics. The proposed algorithms are illustrated by numerical simulations and experimentally validated using a digital signal processor., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Robust admittance shaping approach to grid current harmonic attenuation and resonance damping

  • Cóbreces Álvarez, Santiago
  • Wang, Xiongfei
  • Pérez Serrano, Jorge
  • Griñó Cubero, Robert|||0000-0001-6045-4600
  • Blaabjerg, Frede
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This paper presents a novel grid current control of a grid-connected voltage source converter with an LCL filter. The proposed control method uses an H 8 synthesis method to shape the input admittance of the converter, to track a given current reference, and/or to limit the controller actuation at different frequency ranges. The converter admittance is shaped, both in magnitude and phase, following a model reference defined by the designer in the frequency domain. By specifying a low admittance magnitude reference, the optimization algorithm will obtain a controller that actively damp the filter resonance and attenuate/reject the grid voltage oscillations, either in a wide frequency range or concentrated at the main harmonic frequencies. Additionally, the proposed controller design methodology takes advantage of its admittance phase shaping capability to improve the system robustness in front of grid uncertainties and minimizing converter impact over grid stability due to its positive-real nature. The synthesized controller only measures the grid current and voltage to achieve the aforementioned results, reducing the number of sensors (and their associated cost) required for its implementation. Experimental results illustrate the correct behavior of the closedloop system with the designed controller in time and frequency domain.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Fuzzy logic controller parameter optimization using metaheuristic Cuckoo search algorithm for a magnetic levitation system

  • García-Gutiérrez, Gabriel
  • Arcos Aviles, Diego Gustavo
  • Carrera, Enrique
  • Guinjoan Gispert, Francisco|||0000-0002-7872-4522
  • Motoasca, Emilia
  • Ayala, Paul
  • Ibarra, Alexander
The main benefits of fuzzy logic control (FLC) allow a qualitative knowledge of the desired system’s behavior to be included as IF-THEN linguistic rules for the control of dynamical systems where either an analytic model is not available or is too complex due, for instance, to the presence of nonlinear terms. The computational structure requires the definition of the FLC parameters namely, membership functions (MF) and a rule base (RB) defining the desired control policy. However, the optimization of the FLC parameters is generally carried out by means of a trial and error procedure or, more recently by using metaheuristic nature-inspired algorithms, for instance, particle swarm optimization, genetic algorithms, ant colony optimization, cuckoo search, etc. In this regard, the cuckoo search (CS) algorithm as one of the most promising and relatively recent developed nature-inspired algorithms, has been used to optimize FLC parameters in a limited variety of applications to determine the optimum FLC parameters of only the MF but not to the RB, as an extensive search in the literature has shown. In this paper, an optimization procedure based on the CS algorithm is presented to optimize all the parameters of the FLC, including the RB, and it is applied to a nonlinear magnetic levitation system. Comparative simulation results are provided to validate the features improvement of such an approach which can be extended to other FLC based control systems., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Sensorless control strategy for light-duty EVs and efficiency loss evaluation of high frequency injection under standardized urban driving cycles

  • Trancho, Elena
  • Ibarra Basabe, Edorta
  • Arias Pujol, Antoni|||0000-0002-5424-5981
  • Kortabarria, Iñigo
  • Prieto Arce, Pablo
  • Martínez de Alegría, Iñigo
  • Andreu, Jon
  • López, Iraide
Sensorless control of Electric Vehicle (EV) drives is considered to be an effective approach to improve system reliability and to reduce component costs. In this paper, relevant aspects relating to the sensorless operation of EVs are reported. As an initial contribution, a hybrid sensorless control algorithm is presented that is suitable for a variety of synchronous machines. The proposed method is simple to implement and its relatively low computational cost is a desirable feature for automotive microprocessors with limited computational capabilities. An experimental validation of the proposal is performed on a full-scale automotive grade platform housing a 51¿kW Permanent Magnet assisted Synchronous Reluctance Machine (PM-assisted SynRM). Due to the operational requirements of EVs, both the strategy presented in this paper and other hybrid sensorless control strategies rely on High Frequency Injection (HFI) techniques, to determine the rotor position at standstill and at low speeds. The introduction of additional high frequency perturbations increases the power losses, thereby reducing the overall efficiency of the drive. Hence, a second contribution of this work is a simulation platform for the characterization of power losses in both synchronous machines and a Voltage Source Inverters (VSI). Finally, as a third contribution and considering the central concerns of efficiency and autonomy in EV applications, the impact of power losses are analyzed. The operational requirements of High Frequency Injection (HFI) are experimentally obtained and, using state-of-the-art digital simulation, a detailed loss analysis is performed during real automotive driving cycles. Based on the results, practical considerations are presented in the conclusions relating to EV sensorless control., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Active damping: an Hinf model reference approach

  • Pérez, Jorge
  • Cóbreces Álvarez, Santiago
  • Griñó Cubero, Robert|||0000-0001-6045-4600
  • Huerta, Francisco
  • Rodríguez, Francisco Javier
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This paper focuses on the design of an active-damping controller that shapes the dynamics of an LCL grid connected voltage source converter (VSC) to mimic an L-filter connected VSC. This makes possible to use simpler classical proportional plus resonant or proportional plus integral controllers design methods to regulate the grid current with minimum penalties in both performance and stability margins. The active-damping design follows a model-reference approach and is synthesized through a (sub)optimal H 8 algorithm. The controller uses the grid current and point of common coupling voltage, although it allows the selection of a different set of measurements. Effectiveness of the method is demonstrated with timeand frequency-domain experimental results., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Novel thermal management strategy for improved inverter reliability in electric vehicles

  • Trancho, Elena
  • Ibarra Basabe, Edorta
  • Prieto, Pablo
  • Arias Pujol, Antoni|||0000-0002-5424-5981
  • Lis, Adrian
  • Pai, Ajay Poonjal
Requirements for electric vehicle (EV) propulsion systems—i.e., power density, switching frequency and cost—are becoming more stringent, while high reliability also needs to be ensured to maximize a vehicle’s life-cycle. Thus, the incorporation of a thermal management strategy is convenient, as most power inverter failure mechanisms are related to excessive semiconductor junction temperatures. This paper proposes a novel thermal management strategy which smartly varies the switching frequency to keep the semiconductors’ junction temperatures low enough and consequently extend the EV life-cycle. Thanks to the proposal, the drivetrain can operate safely at maximum attainable performance limits. The proposal is validated through simulation in an advanced digital platform, considering a 75-kW in-wheel Interior Permanent Magnet Synchronous Machine (IPMSM) drive fed by an automotive Silicon Carbide (SiC) power converter., This work has been supported in part by the European Commission through ECSEL Joint Undertaking (JU) under Grant Agreement No. 783174 (HiPERFORM project), by the Government of the Basque Country within the research program ELKARTEK as the projects ELPIVE (KK-2019/0006) and ENSOL 2 (KK-2020/00077), by the Government of the Basque Country within the fund for research groups of the Basque University system IT978-16, by the Government of Spain through the Agencia Estatal de Investigación Project DPI2017-85404-P, and by the Generalitat de Catalunya through the Project 2017 SGR 872., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Multicellular feedback control of a genetic toggle-switch in microbial consortia

  • Fiore, Davide
  • Salzano, Davide
  • Cristòbal-Cóppulo, Enric
  • Olm Miras, Josep Maria
  • di Bernardo, Mario
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., We describe a multicellular approach to control a target cell population endowed with a bistable toggle-switch. The idea is to engineer a synthetic microbial consortium consisting of three different cell populations. In such a consortium, two populations, the Togglers, responding to some reference input, can induce the switch of a bistable memory mechanism in a third population, the Targets, so as to activate or deactivate some additional functionalities in the cells. Communication among the three populations is established by orthogonal quorum sensing molecules that are used to close a feedback control loop across the populations. The control design is validated via in-silico experiments in BSim, a realistic agent-based simulator of bacterial populations., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Current-limited suboptimal sliding mode control for voltage-regulated synchronous buck converters

  • Ramos Lara, Rafael Ramón
  • Repecho del Corral, Víctor
  • Biel Solé, Domingo
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This paper proposes a new sliding mode control based on a non-linear switching surface that provides a suboptimal current-limited start-up response in step-down converters. The main idea behind the design consists in combining different switching surfaces. The first one forces the system trajectories to track a constant current path until the output voltage error is small. A non-singular terminal switching surface then drives the trajectories to the vicinity of the steady state operating point. Finally, a first order switching surface regulates the steady state providing very good rates of load and line regulation. The paper presents the design guidelines of the suboptimal sliding mode control and the experimental evaluation that confirms the effectiveness of the proposal., This work was partially supported by the Government of Spain through the Agencia Estatal de Investigacion´ Project DPI2017-85404-P and by the Generalitat de Catalunya through the Project 2017 SGR 872., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Open loop testing for optimizing the closed loop operation of chemical systems

  • Domínguez Pumar, Manuel
  • Olm Miras, Josep Maria
  • Kowalski, Lukasz
  • Jiménez Serres, Vicente
© <2020>. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, One way to optimize the operation of chemical systems consists on using closed loop controls while the system is operated. This way, it is possible to optimize the operating point in the plant, process or chemical system so that certain quantities are maximized/minimized or time responses are reduced. In the design of the closed loop controls, though, one of the problems is the large number of configuration parameters involved and the uncertainties in the system. The objective of this paper is to present how recently proposed controls, exploiting time-scale separation, allow to configure their closed loop configuration parameters from open-loop measurements. These controls have been proposed to accelerate the time response of metal-oxide gas sensors by operating at constant surface potential. The main result of the paper explains the link between the open loop measurements and closed loop operation. Experiments are provided using a commercial off-the-shelf Microelectromechanical gas sensor., The work of M. Dominguez-Pumar, L. Kowalski and V. Jimenez was partially supported by the Government of Spain through the Agencia Estatal de Investigación Projects ESP2016-79612-C3-2-R and RTI2018-098728-B-C33 and by the Generalitat de Catalunya through the Project 2017 SGR 279. The work of J.M. Olm was partially supported by the Government of Spain through the Agencia Estatal de Investigación Project DPI2017-85404-P and by the Generalitat de Catalunya through the Project 2017 SGR 872., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Digital control of multiphase series capacitor buck converter prototype for the powering of HL-LHC inner triplet magnets

  • Ibarra Basabe, Edorta
  • Arias Pujol, Antoni
  • Martínez de Alegría, Iñigo
  • Otero, Alberto
  • de Mallac, Louis
©2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., A major upgrade will be conducted in the Large Hardon Collider (LHC) at CERN. This high-luminosity (HL) version of the LHC will increase the nominal luminosity by a factor of five. One of the key technologies of the HL-LHC is the new superconducting inner triplet (IT) magnets, responsible of producing high magnetic fields to focus particle beams. To power the IT magnets from the grid, a multistage power supply with an intermediate 24-V battery pack is being considered. In such topology, a low-voltage high-current dc/dc converter operating with a very high step-down ratio is required for the final conversion stage. In this work, an interleaved multiphase series capacitor buck converter is proposed to feed the IT magnets from the battery pack. A novel voltage regulation approach that ensures the current balance between the paralleled series capacitor cells is also proposed, where one cell is responsible for the output voltage regulation, while the remaining cells are current-regulated. A balanced current sharing between the series capacitor cells is achieved, when the current-controlled cells are referenced by the actual current of the first one. The proposal is theoretically analyzed and experimentally validated in a six-cell 1000-A prototype unit., This work was supported in part by the HL-LHC project by the CERN and APERT (UPV/EHU) “Collaboration in the Study of Power Converter Topologies for Inner Triplet magnets with Energy Recovery in the framework of the High Luminosity upgrade for the LHC at CERN,” in part by the Government of the Basque Country within the fund for research groups of the Basque University system under Grant IT978-16, in part by the Government of Spain through the Agencia Estatal de Investigación under Project DPI2017-85404-P, and in part by the Generalitat de Catalunya under Project 2017 SGR 872., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

An adaptive observer-based controller design for active damping of a DC network with a constant power load

  • Machado, Juan E.
  • Ortega, Romeo
  • Astolfi, Alessandro
  • Arocas Pérez, José
  • Pyrkin, Anton A.
  • Bobtsov, Alexey
  • Griñó Cubero, Robert
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This article explores a nonlinear, adaptive controller aimed at increasing the stability margin of a direct-current (dc), small-scale, electrical network containing an unknown constant power load (CPL). Due to its negative incremental impedance, this load reduces the effective damping of the network, which may lead to voltage oscillations and even to voltage collapse. To overcome this drawback, we consider the incorporation of a controlled dc-dc power converter in parallel with the CPL. The design of the control law for the converter is particularly challenging due to the existence of unmeasured states and unknown parameters. We propose a standard input-output linearization stage, to which a suitably tailored adaptive observer is added. The good performance of the controller is validated through experiments on a small-scale network., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Novel thermal management strategy for improved inverter reliability in electric vehicles

  • Trancho, Elena
  • Ibarra Basabe, Edorta
  • Prieto, Pablo
  • Arias Pujol, Antoni
  • Lis, Adrian
  • Pai, Ajay Poonjal
Requirements for electric vehicle (EV) propulsion systems—i.e., power density, switching frequency and cost—are becoming more stringent, while high reliability also needs to be ensured to maximize a vehicle’s life-cycle. Thus, the incorporation of a thermal management strategy is convenient, as most power inverter failure mechanisms are related to excessive semiconductor junction temperatures. This paper proposes a novel thermal management strategy which smartly varies the switching frequency to keep the semiconductors’ junction temperatures low enough and consequently extend the EV life-cycle. Thanks to the proposal, the drivetrain can operate safely at maximum attainable performance limits. The proposal is validated through simulation in an advanced digital platform, considering a 75-kW in-wheel Interior Permanent Magnet Synchronous Machine (IPMSM) drive fed by an automotive Silicon Carbide (SiC) power converter., This work has been supported in part by the European Commission through ECSEL Joint Undertaking (JU) under Grant Agreement No. 783174 (HiPERFORM project), by the Government of the Basque Country within the research program ELKARTEK as the projects ELPIVE (KK-2019/0006) and ENSOL 2 (KK-2020/00077), by the Government of the Basque Country within the fund for research groups of the Basque University system IT978-16, by the Government of Spain through the Agencia Estatal de Investigación Project DPI2017-85404-P, and by the Generalitat de Catalunya through the Project 2017 SGR 872., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Sensorless control strategy for light-duty EVs and efficiency loss evaluation of high frequency injection under standardized urban driving cycles

  • Trancho, Elena
  • Ibarra Basabe, Edorta
  • Arias Pujol, Antoni
  • Kortabarria, Iñigo
  • Prieto Arce, Pablo
  • Martínez de Alegría, Iñigo
  • Andreu, Jon
  • López, Iraide
Sensorless control of Electric Vehicle (EV) drives is considered to be an effective approach to improve system reliability and to reduce component costs. In this paper, relevant aspects relating to the sensorless operation of EVs are reported. As an initial contribution, a hybrid sensorless control algorithm is presented that is suitable for a variety of synchronous machines. The proposed method is simple to implement and its relatively low computational cost is a desirable feature for automotive microprocessors with limited computational capabilities. An experimental validation of the proposal is performed on a full-scale automotive grade platform housing a 51¿kW Permanent Magnet assisted Synchronous Reluctance Machine (PM-assisted SynRM). Due to the operational requirements of EVs, both the strategy presented in this paper and other hybrid sensorless control strategies rely on High Frequency Injection (HFI) techniques, to determine the rotor position at standstill and at low speeds. The introduction of additional high frequency perturbations increases the power losses, thereby reducing the overall efficiency of the drive. Hence, a second contribution of this work is a simulation platform for the characterization of power losses in both synchronous machines and a Voltage Source Inverters (VSI). Finally, as a third contribution and considering the central concerns of efficiency and autonomy in EV applications, the impact of power losses are analyzed. The operational requirements of High Frequency Injection (HFI) are experimentally obtained and, using state-of-the-art digital simulation, a detailed loss analysis is performed during real automotive driving cycles. Based on the results, practical considerations are presented in the conclusions relating to EV sensorless control., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Active damping: an Hinf model reference approach

  • Pérez, Jorge
  • Cóbreces Álvarez, Santiago
  • Griñó Cubero, Robert
  • Huerta, Francisco
  • Rodríguez, Francisco Javier
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This paper focuses on the design of an active-damping controller that shapes the dynamics of an LCL grid connected voltage source converter (VSC) to mimic an L-filter connected VSC. This makes possible to use simpler classical proportional plus resonant or proportional plus integral controllers design methods to regulate the grid current with minimum penalties in both performance and stability margins. The active-damping design follows a model-reference approach and is synthesized through a (sub)optimal H 8 algorithm. The controller uses the grid current and point of common coupling voltage, although it allows the selection of a different set of measurements. Effectiveness of the method is demonstrated with timeand frequency-domain experimental results., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Comparison of first- and second-order sliding-mode controllers for a dc-dc dual active bridge

  • Dòria Cerezo, Arnau
  • Serra, Federico
  • Esteban, Francisco Daniel
  • Biel Solé, Domingo
  • Griñó Cubero, Robert
This paper compares four sliding-mode control strategies for a dual active bridge. The proposed control algorithms define different switching functions resulting in first-and second-order controllers, and using both discontinuous and continuous sliding-mode algorithms. The paper details the design stage and includes simulation and experimental tests to better compare the performance for each control scheme., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A behavioural dynamic model for constant power loads in single-phase AC systems

  • Griñó Cubero, Robert
  • Ortega, Romeo
  • Fridman, Emilia
  • Zhang, Jin
  • Mazenc, Frédéric
Constant power loads (CPLs) in power systems have a destabilizing effect that gives rise to significant oscillations or to network collapse, motivating the development of new methods to analyse their effect in AC and DC power systems. A sine qua non condition for this analysis is the availability of a suitable mathematical model for the CPL. In the case of DC systems power is simply the product of voltage and current, hence a CPL corresponds to a first–third quadrant hyperbola in the loads voltage–current plane. The same approach is applicable for balanced three-phase systems that, after a rotation of the coordinates to the synchronous frame, can be treated as a DC system. Modelling CPLs for single-phase (or unbalanced poly-phase) AC systems, on the other hand, is a largely unexplored area because in AC systems (active and reactive) power involves the integration in a finite window of the product of the voltage and current signals. In this paper we propose a simple dynamic model of a CPL that is suitable for the analysis of single-phase AC systems. We give conditions on the tuning gains of the model that guarantee the CPL behaviour is effectively captured., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Robust admittance shaping approach to grid current harmonic attenuation and resonance damping

  • Cóbreces Álvarez, Santiago
  • Wang, Xiongfei
  • Pérez Serrano, Jorge
  • Griñó Cubero, Robert
  • Blaabjerg, Frede
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This paper presents a novel grid current control of a grid-connected voltage source converter with an LCL filter. The proposed control method uses an H 8 synthesis method to shape the input admittance of the converter, to track a given current reference, and/or to limit the controller actuation at different frequency ranges. The converter admittance is shaped, both in magnitude and phase, following a model reference defined by the designer in the frequency domain. By specifying a low admittance magnitude reference, the optimization algorithm will obtain a controller that actively damp the filter resonance and attenuate/reject the grid voltage oscillations, either in a wide frequency range or concentrated at the main harmonic frequencies. Additionally, the proposed controller design methodology takes advantage of its admittance phase shaping capability to improve the system robustness in front of grid uncertainties and minimizing converter impact over grid stability due to its positive-real nature. The synthesized controller only measures the grid current and voltage to achieve the aforementioned results, reducing the number of sensors (and their associated cost) required for its implementation. Experimental results illustrate the correct behavior of the closedloop system with the designed controller in time and frequency domain., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Comprehensive high speed automotive SM-PMSM torque control stability analysis including novel control approach

  • Arias Pujol, Antoni
  • Ibarra Basabe, Edorta
  • Trancho, Elena
  • Griñó Cubero, Robert
  • Kortabarria, Iñigo
  • Caum Aregay, Jesús
Permanent magnet synchronous machines (PMSM) are widely used in the automotive industry for electric vehicle (EV) and hybrid electric vehicle (HEV) propulsion systems, where the trend is to achieve high mechanical speeds. High speeds inevitably imply high current electrical frequencies, which can lead to a lack of controllability when using field oriented control (FOC) due to sampling period constraints. In this work, a comprehensive discrete-time model is fully developed to assess the stability issues in the widely used FOC. A speed-adaptive control structure that overcomes these stability problems and extends the speed operation range of the PMSM is presented. Also, a numerical methodology from which the maximum operating stable frequency can be computed in advance of any experimentation, is developed. All contributions are accompanied and supported by numerical results obtained from an accurate MATLAB/Simulink model., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Three-phase phase-locked loop algorithms based on sliding modes

  • Dòria Cerezo, Arnau
  • Repecho del Corral, Víctor
  • Biel Solé, Domingo
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This article proposes a family of phase-locked loop schemes based on sliding modes. The use of sliding mode algorithms ensures fast response and global stability. In particular, two new algorithms are presented, both based on a complex framework for representing three-phase signals. This article compares the obtained algorithms with the traditional schemes, and a faster response is obtained when sliding modes are used. Additionally, as an application example, the algorithm is combined with a complex-coefficient filter that allows an easy identification of both positive and negative sequence harmonics. The proposed algorithms are illustrated by numerical simulations and experimentally validated using a digital signal processor., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Fuzzy logic controller parameter optimization using metaheuristic Cuckoo search algorithm for a magnetic levitation system

  • García-Gutiérrez, Gabriel
  • Arcos Aviles, Diego Gustavo
  • Carrera, Enrique
  • Guinjoan Gispert, Francisco
  • Motoasca, Emilia
  • Ayala, Paul
  • Ibarra, Alexander
The main benefits of fuzzy logic control (FLC) allow a qualitative knowledge of the desired system’s behavior to be included as IF-THEN linguistic rules for the control of dynamical systems where either an analytic model is not available or is too complex due, for instance, to the presence of nonlinear terms. The computational structure requires the definition of the FLC parameters namely, membership functions (MF) and a rule base (RB) defining the desired control policy. However, the optimization of the FLC parameters is generally carried out by means of a trial and error procedure or, more recently by using metaheuristic nature-inspired algorithms, for instance, particle swarm optimization, genetic algorithms, ant colony optimization, cuckoo search, etc. In this regard, the cuckoo search (CS) algorithm as one of the most promising and relatively recent developed nature-inspired algorithms, has been used to optimize FLC parameters in a limited variety of applications to determine the optimum FLC parameters of only the MF but not to the RB, as an extensive search in the literature has shown. In this paper, an optimization procedure based on the CS algorithm is presented to optimize all the parameters of the FLC, including the RB, and it is applied to a nonlinear magnetic levitation system. Comparative simulation results are provided to validate the features improvement of such an approach which can be extended to other FLC based control systems., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Herramientas para la docencia de control digital en grados de ingeniería, Tools for teaching digital control in engineering degrees

  • Lerma Macaya, Eneko
  • Costa Castelló, Ramon
  • Griñó Cubero, Robert
  • Sanchis, Carlos
En este trabajo se describen un conjunto de materiales pedagógicos que han sido desarrollados para dar soporte a la docencia del control digital. En particular, se presentan un conjunto de herramientas interactivas y el proyecto Duino-Based Learning (DBL) pensado para desarrollar prácticas experimentales de control digital utilizando Arduino. Además, se describe el contenido de un curso de control digital, que  se imparte en el marco de una titulación de ingeniería industrial, y como se utilizan las diferentes herramientas desarrolladas en su docencia., Peer Reviewed, Postprint (published version)
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

An energy management system design using fuzzy logic control: smoothing the grid power profile of a residential electro-thermal microgrid

  • Arcos Avilés, Diego
  • Pascual Miqueleiz, Julio María
  • Guinjoan Gispert, Francesc
  • Marroyo Palomo, Luis
  • García Gutiérrez, Gabriel
  • Gordillo, Rodolfo
  • Llanos, Jacqueline
  • Sanchis Gúrpide, Pablo
  • Motoasca, Emilia
This work deals with the design of a Fuzzy Logic Control (FLC) based Energy Management System (EMS) for smoothing the grid power prole of a grid-connected electro-thermal microgrid. The case study aims to design an Energy Management System (EMS) to reduce the impact on the grid power when renewable energy sources are incorporated to pre-existing grid-connected household appliances. The scenario considers a residential microgrid comprising photovoltaic and wind generators, at-plate collectors, electric and thermal loads and electrical and thermal energy storage systems and assumes that neither renewable generation nor the electrical and thermal load demands are controllable. The EMS is built through two low-complexity FLC blocks of only 25 rules each. The first one is in charge of smoothing the power prfile exchanged with the grid, whereas the second FLC block drives the power of the Electrical Water Heater (EWH). The EMS uses the forecast of the electrical and thermal power balance between generation and consumption to predict the microgrid behavior, for each 15-minute interval, over the next 12 hours. Simulations results, using real one-year measured data show that the proposed EMS design achieves 11.4% reduction of the maximum power absorbed from the grid and an outstanding reduction of the grid power profile ramp-rates when compared with other state-of-the-art studies., This work was supported in part by the projects 2019-PIC-003-CTE and 2020-EXT-007 from the Research Group of Propagation, Electronic Control, and Networking (PROCONET) of Universidad de las Fuerzas Armadas ESPE, in part by the Belgian Development Cooperation (DGD) and the VLIR-UOS under the project EC2020SIN322A101, in part by the Spanish Ministry of Industry and Competitiveness under Grant DPI2017-85404 and Grant PID2019-111443RB-100, and in part by the Spanish State Research Agency (AEI/10.13039/501100011033) under Grant PID2019-110816RB-C21 and Grant PID2019-111262RB-I00.