Skip to main content

OPTIMIZACION DE ELECTROCATALIZADORES BASADOS EN NANOCOMPOSITES HIBRIDOS ESTABLES PARA PILAS DE COMBUSTIBLE, ELECTROLIZADORES Y PILAS REGENERATIVAS

ENE2017-83976-C2-1-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Carbon xerogels electrochemical oxidation and correlation with their physico-chemical properties

  • Alegre Gresa, Cinthia
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
10 Figuras, 8 Tablas.-- Material suplementario disponible en línea en la página web del editor., The electrochemical oxidation of carbon represents a relevant limitation for the application of carbon-based materials at the electrodes of several electrochemical devices, like fuel cells, metal-air batteries, water electrolyzers or supercapacitors. Understanding the key influencing parameters is thus of paramount importance to prevent and avoid the degradation of carbon materials. In the present investigation, carbon xerogels (CXGs) as a model of synthetic amorphous carbon, were studied on the basis of different surface chemistry and structure. Electro-oxidation experiments consisted of potential holding (1.2 V vs. RHE) on electrodes prepared with CXGs. The results indicate that the presence of oxygen groups (-C-O) and a higher ordering degree hinder the carbon oxidation reaction. A sub-structural parameter considering both the amount of oxygen-free carbon atoms (C-C + C*-C-O) from X-ray photoelectron spectroscopy, and the disordering degree from Raman spectra (in terms of ID/IG) is here proposed as a new factor to evaluate the tendency of an amorphous carbon material, like xerogels, to be electrochemically oxidized., Authors acknowledge financial support given by Spanish Ministry of Science, Innovation and University (MICINN) through project ENE2017-83976-C2-1-R (co-founded by FEDER) and from Aragón Government to the Fuel Conversion Group. C. Alegre and D. Sebastián acknowledge also MICINN for their Juan de la Cierva (FJCI-2015-25560) and Ramón y Cajal (RyC-2016-20944) research contracts, respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electrochemical oxidation of ordered mesoporous carbons and the influence of graphitization

  • Pérez Rodríguez, Sara
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
6 Figuras.- 4 Tablas.- Datos suplementarios disponibles en línea en la página web del editor., Ordered mesoporous carbon materials (OMC), obtained by the template carbonization pathway from silica templates (sacrificial method), exhibit promising features for many applications mainly due to their large surface area. Graphitization is a common approach to improve the electrical conductivity and degradation resistance. We have investigated the graphitization of two different OMC at 1500 °C and the electrochemical oxidation by potential holding at 1.4 V vs. reversible hydrogen electrode (RHE) in acidic electrolyte. Graphitization conducts to a significant reduction of the electrooxidation associated charge, between 50 and 90% depending on the carbon properties, together with a decrease of surface area of 35–48%. The materials still exhibit a large electrochemical surface area, according to electrochemical impedance and cyclic voltammetry experiments. Upon electrooxidation, the relative amount of oxygen increases according to a comparative analysis of X-ray photoelectron spectroscopy test of the electrodes before and after potential holding. The results are of interest to define strategies towards the amelioration of carbon degradation by electrooxidation in electrochemical devices., The authors gratefully acknowledge financial support given by Spanish Ministry of Science, Innovation and Universities MICINN (ENE2017-83976-C2-1-R) and to the Aragón Government to the Fuel Conversion Group (T06_17R). DS acknowledges also MICINN for his Ramón y Cajal contract (RyC-2016-20944)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ni-Based composites from chitosan biopolymer a one-step synthesis for oxygen evolution reaction

  • Aghabarari, Behzad
  • Luque-Centeno, José Manuel
  • Capel Sánchez, María del Carmen
  • Lázaro Elorri, María Jesús
  • Martínez Huerta, M. Victoria
Cost-efficient and sustainable electrocatalysts for oxygen evolution reaction (OER) is highly desired in the search for clean and renewable energy sources. In this study, we develop a new one-step synthesis strategy of novel composites based on Ni and molybdenum carbide embedded in N- and P-dual doped carbon matrices using mainly chitosan biopolymer as the carbon and nitrogen source, and molybdophosphoric acid (HMoP) as the P and Mo precursor. Two composites have been investigated through annealing a mixture of Ni/chitosan and HMoP with two unlike carbon matrices, melamine and graphene oxide, at a high temperature. Both composites exhibit similar multi-active sites with high electrocatalytic activity for OER in an alkaline medium, which is comparable to the IrO2 catalyst. For this study, an accurate measurement of the onset potential for O2 evolution has been used by means of a rotating ring-disk electrode (RRDE). The use of this method allows confirming a better stability in the chitosan/graphene composite. This work serves as a promising approach for the conversion of feedstock and renewable chitosan into desired OER catalysts., By the Spanish Ministry of Science, Innovation and Universities, through project ENE2017-83976-C2-1-R (co-founded by FEDER), the Spanish National Research Council (CSIC) through project iCOOP20202 and MERC grant project 99392002., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tantalum-based electrocatalysts prepared by a microemulsion method for the oxygen reduction and evolution reactions

  • Ruiz Cornejo, Juan Carlos
  • Sebastián del Río, David
  • Martínez Huerta, M. Victoria
  • Lázaro Elorri, María Jesús
13 Figures, 7 Tables.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Bifunctional catalysts for oxygen electrodes, active for both the oxygen reduction and evolution reactions (ORR, OER), are highly desirable for the development of electrochemical energy conversion devices. In this work, carbon-supported tantalum based catalysts were synthesized by a microemulsion procedure from tantalum ethoxide through a fast hydrolysis reaction followed by heat treatment. The nature and composition of the different tantalates and oxides (general formula NaaTabOc, with a/b = 0–1 and c/b = 2.5–3) relied on the concentration of ethanol as well as on the annealing temperature, with Na2Ta8O21 as predominant crystal phase in all cases. High annealing temperatures resulted in a certain degree of oxygen substoichiometry, which creates defects responsible of electrocatalytic activity. The electrochemical response for the oxygen reduction and the oxygen evolution reactions in alkaline electrolyte (0.1 M NaOH) was evaluated for the first time in this type of materials. The presence of Na2Ta8O21 phase over other oxides/tantalates, a high crystallinity of such Ta-phase, and the oxygen substoichiometry are the three parameters playing a relevant role to favor ORR and OER electro-activity. The best formulations were found in a trade-off situation using 3% ethanol and annealing at 900 °C., The authors wish to acknowledge the Ministerio de Ciencia, Innovación y Universidades (MICINN) and FEDER for the received funding in the project of reference ENE2017-83976-C2-1-R, as well as to the Gobierno de Aragón (DGA) for the funding to Grupo de Investigación Conversión de Combustibles (T06_17R). J.C. Ruiz-Cornejo acknowledges also DGA his PhD grant. D. Sebastián acknowledges also MICINN for his Ramón y Cajal research contract (RyC-2016-20944)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Titanium carbonitride-graphene composites assembled with organic linkers as electrocatalytic supports for methanol oxidation reaction

  • Roca-Ayats, M.
  • Yeung, King Lun
  • Hernández Caricol, Margarita
  • Chen, W. Y.
  • Deng, Ran
  • García Fierro, José Luis
  • Lázaro Elorri, María Jesús
  • Martínez Huerta, M. Victoria
10 Figures, 2 Tables.-- Supplementary information available.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, In the present work, the effect of different composites as electrocatalytic supports for the methanol oxidation reaction is evaluated. Two different TiCN-rGO composites, using organic compounds as linkers were synthesized. Subsequently, platinum was incorporated in the form of nanoparticles, and the electrocatalysts were characterized and compared with similar nanoparticles supported on TiCN. The electrocatalysts were characterized by XPS, TEM, XRD, Raman and FTIR spectroscopies and ICP-MS and the catalytic performance toward COads and methanol oxidations was evaluated. Results showed that the platinum nanoparticles were preferentially deposited on top of the TiCN particles rather than on the reduced graphene oxide, which allowed the nanoparticles to benefit from the TiCN electronic promoting effect. In addition, the presence of reduced graphene oxide contributes on the improvement of the morphological properties of the electrocatalyst, reducing the agglomeration degree of the particles and considerably enhancing the catalytic mass activities., Authors acknowledge financial support given by Spanish Ministry of Science, Innovation and Universities, through project ENE2017-83976-C2-1-R (co-founded by FEDER), Spanish National Research Council (CSIC) through project i-LINK1106 and Aragon Gouverment through Fuel Conversion Group (co-founded by FEDER)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

N-doped graphene catalysts with high nitrogen concentration for the oxygen reduction reaction

  • Lemes Pacheco, Giovanni
  • Sebastián del Río, David
  • Pastor Tejera, Elena
  • Lázaro Elorri, María Jesús
9 Figures, 3 Tables.-- Informacion suplementaria disponible en línea en la página web del editor.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Nitrogen doped reduced graphene oxide (NrGO) catalysts and composites of these with carbon nitride (CN) with nitrogen content as high as 19.8 wt% and 35.8 wt%, respectively, have been synthesized by thermal annealing of multilayer graphene oxide and urea at different temperatures. Nitrogen has been effectively introduced as a mix of pyridinic, pyrrolic, pyridonic and quaternary bonding configurations into the carbon lattice of graphene upon removal of CN phase over 650 °C. The electrocatalytic activity towards oxygen reduction reaction (ORR) in 0.1 M NaOH has been investigated. NrGO catalysts with less nitrogen content show better performance than composites. NrGO produced at 800 °C presents the best activity with half-wave potential of 0.76 V vs. RHE and a mean number of electrons of 3.7, which are close to a commercial Pt/C catalyst. This study concludes that a high concentration of nitrogen atoms in multilayer reduced graphene oxide does not necessarily produce a highly active electrocatalyst, suggesting that carbon in the neighbourhood of nitrogen atoms are the active sites for ORR in alkaline medium., Authors acknowledge the financial support given by the Spanish Ministry of Science, Innovation and Universities (MICINN) through projects ENE2014-52158-C2-1-R and 2-R and ENE2017-83976-C2-1-R and 2-R (co-founded by FEDER) and Aragón Government to support “Grupo de Conversion de Combustibles” (T06_17R). G. Lemes and D. Sebastián thank the Aragón Government and MICINN for their Ph.D. grant and Ramón y Cajal research contract (RyC-2016-20944), respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

CoTiO3/NrGO nanocomposites for oxygen evolution and oxygen reduction reactions: Synthesis and electrocatalytic performance

  • Luque-Centeno, José Manuel
  • Martínez Huerta, M. Victoria
  • Sebastián del Río, David
  • Pardo, Juan Ignacio
  • Lázaro Elorri, María Jesús
11 Figuras, 3 Tablas.-- Material suplementario disponible en línea en la página web del editor., Oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) catalysts play an important role in energy conversion and storage devices, but highly active and robust nonprecious metal catalysts are required to address the cost and durability issues. In this work, a modified gel methodology has been used to obtain nanocomposites of perovskite CoTiO3 and N-doped reduced graphene oxide (NrGO). Moreover, the influence of the annealing extent in the synthesis has been studied. The composites show higher activity in oxygen evolution and reduction reactions in alkaline environment compared to sole ilmenite, which is related to a strong interaction between cobalt titanate and NrGO carbon matrix. The annealing duration appears as a key variable to modulate the physicochemical properties and the electrochemical behavior. The composite prepared at the largest duration (3 h) exhibit enhanced bifunctional properties for ORR and OER, with onset potentials of 0.93 V and 1.53 V vs. RHE respectively, which is mainly attributed to higher concentration of nitrogen, larger extent of defects and/or the presence of more oxidized Co species in the nanocomposite., The authors wish to acknowledge the Ministerio de Ciencia, Innovación y Universidades (MICINN) and FEDER for the received funding in the project of reference ENE2017-83976-C2-1-R. Thanks also to the Gobierno de Aragón (DGA) the funding for the Grupo de Investigación Conversión de Combustibles (T06_17R). J. M. Luque also thanks MICINN for its Ph.D. grant. D. Sebastián acknowledges the MICINN for the contract Ramón y Cajal (RyC-2016-20944)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Graphene oxide nanofibers: A nanocarbon material with tuneable electrochemical properties

  • Torres Gamarra, Daniel
  • Pérez Rodríguez, Sara
  • Sebastián del Río, David
  • Pinilla Ibarz, José Luis
  • Lázaro Elorri, María Jesús
  • Suelves Laiglesia, Isabel
8 Figures, 3 Tables.-- Supplementary material.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, We report the electrochemical properties of a novel nanocarbon material obtained by chemical oxidation and ultrasound-assisted exfoliation of fishbone carbon nanofibers (CNF). The resulting material maintains its tubular morphology and presents a characteristic interlayer spacing of graphene oxide (above 0.75 nm). Thus, this is called graphene oxide nanofibers (GONF). The new rearrangement of the accessible sp2-carbon domains makes the GONF a potential alternative for electrochemical energy conversion/storage applications, showing a developed porosity and tuneable surface chemistry. The influence of the oxidation degree of GONF on its electrochemical behaviour in 0.5 M H2SO4 is reported. Cyclic voltammetry and electrochemical impedance spectroscopy evidenced a significant increase of the capacitance for GONF, being 4–27 times higher than that obtained for pristine CNF. An optimum in the capacitance (49.2 F g−1) was obtained using an oxidation ratio (OR = KMnO4/Sample) of 6 and 60 min of sonication. The latter is ascribed to the unique structure of this material containing both graphitic and graphene oxide domains. Higher OR or longer sonication times led to a partial loss of graphitic domains and higher contribution of micropores, which worsen the fast ion/electrolyte transport. Additionally, the optimized material exhibited an improved activity for the hydrogen evolution reaction., This work was funded by FEDER, the Spanish Ministry of Science, Innovation and Universities MICINN (ENE2017-83976-C2-1-R & ENE2017-83854-R) and by the Aragón Government to the Fuel Conversion Group (T06_17R). DS thanks MICINN for his Ramon y Cajal research contract (RyC-2016-20944)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Insights on the electrochemical oxidation of ordered mesoporous carbons

  • Pérez Rodríguez, Sara
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
6 Figures, 3 Tables., Ordered mesoporous carbon materials (OMC) present a developed porosity, making them promising candidates for electrochemical energy-conversion devices. However, OMC undergo electrochemical oxidation causing the degradation of electrodes and exhibit low electrical conductivities due to their amorphous carbon structure. To address these issues, OMC can be graphitized by thermal treatments. Herein, the electrooxidation behavior of different OMC, prior and upon graphitization, is studied by chronoamperometry in a highly acidic electrolyte (0.5 M H2SO4). Several oxidation potentials and temperatures are used to gain insights on the electrooxidation mechanism. Potential holding tests evidenced differences in the oxidation behavior of as-synthesized and graphitized materials. Graphitization results in a strong decrease of the oxidation charge from 93 to 7% depending on the carbon properties, applied potential and temperature. Temperature plays an important role on carbon degradation of not-graphitized OMC, with a strong electrochemical capacitance loss (90%–93%) after tests at 40 °C and 60 °C. Conversely, graphitized materials present a raise of the capacitance by the creation of oxygen-functionalities as confirmed by post-mortem X-ray photoelectron spectra analysis. Additionally, graphitized materials show an increase of the apparent activation energy associated to electrooxidation (7 times higher), indicative of their improved resistance., The authors gratefully acknowledge financial support given by Spanish Ministry of Science, Innovation and Universities MICINN (ENE2017-83976-C2-1-R) and to the Aragón Government to the Fuel Conversion Group (T06_17R). DS acknowledges also MICINN for his Ramón y Cajal contract (RyC-2016-20944)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Supporting IrO2 and IrRuOx nanoparticles on TiO2 and Nb-doped TiO2 nanotubes as electrocatalysts for the oxygen evolution reaction

  • Genova-Koleva, Radostina V.
  • Alcaide, Francisco
  • Álvarez, Garbiñe
  • Cabot, Pere L.
  • Grande, Hans-Jürgen
  • Martínez Huerta, M. Victoria
  • Miguel, Óscar
[EN] IrO 2 and IrRuO x (Ir:Ru 60:40 at%), supported by 50 wt% onto titania nanotubes (TNTs) and (3 at% Nb) Nb-doped titania nanotubes (Nb-TNTs), as electrocatalysts for the oxygen evolution reaction (OER), were synthesized and characterized by means of structural, surface analytical and electrochemical techniques. Nb doping of titania significantly increased the surface area of the support from 145 (TNTs) to 260 m 2 g −1 (Nb-TNTs), which was significantly higher than those of the Nb-doped titania supports previously re- ported in the literature. The surface analytical techniques showed good dispersion of the catalysts onto the supports. The X-ray photoelectron spectroscopy analyses showed that Nb was mainly in the form of Nb(IV) species, the suitable form to behave as a donor introducing free electrons to the conduction band of titania. The redox transitions of the cyclic voltammograms, in agreement with the XPS results, were found to be reversible. Despite the supported materials presented bigger crystallite sizes than the unsupported ones, the total number of active sites of the former was also higher due to their better cat- alyst dispersion. Considering the outer and the total charges of the cyclic voltammograms in the range 0.1–1.4 V, stability and electrode potentials at given current densities, the preferred catalyst was IrO 2 sup- ported on the Nb-TNTs. The electrode potentials corresponding to given current densities were between the smallest ones given in the literature despite the small oxide loading used in this work and its Nb doping, thus making the Nb-TNTs-supported IrO 2 catalyst a promising candidate for the OER. The good dispersion of IrO 2 , high specific surface area of the Nb-doped supports, accessibility of the electroactive centers, increased stability due to Nb doping and electron donor properties of the Nb(IV) oxide species were considered the main reasons for its good performance., The authors would like to thank to EU FP7 SUSHGEN Network project No. 238678 and project ENE2017-83976-C2-1-R (AEI/FEDER, EU)). The facilities of the Centres Científics i Tecnològics de la Universitat de Barcelona (CCiT-UB) are also acknowledged for the struc- tural and surface analyses.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Capacitance enhancement of hydrothermally reduced graphene oxide nanofibers

  • Torres Gamarra, Daniel
  • Pérez Rodríguez, Sara
  • Sebastián del Río, David
  • Pinilla Ibarz, José Luis
  • Lázaro Elorri, María Jesús
  • Suelves Laiglesia, Isabel
9 figures, 4 tables., Nanocarbon materials present sp2-carbon domains skilled for electrochemical energy conversion or storage applications. In this work, we investigate graphene oxide nanofibers (GONFs) as a recent interesting carbon material class. This material combines the filamentous morphology of the starting carbon nanofibers (CNFs) and the interlayer spacing of graphene oxide, and exhibits a domain arrangement accessible for fast transport of electrons and ions. Reduced GONFs (RGONFs) present the partial removal of basal functional groups, resulting in higher mesoporosity, turbostratic stacking, and surface chemistry less restrictive for transport phenomena. Besides, the filament morphology minimizes the severe layer restacking shown in the reduction of conventional graphene oxide sheets. The influence of the reduction temperature (140–220 °C) on the electrochemical behaviour in aqueous 0.5 M H2SO4 of RGONFs is reported. RGONFs present an improved capacitance up to 16 times higher than GONFs, ascribed to the unique structure of RGONFs containing accessible turbostratic domains and restored electronic conductivity. Hydrothermal reduction at 140 °C results in the highest capacitance as evidenced by cyclic voltammetry and electrochemical impedance spectroscopy measurements (up to 137 F·g−1). Higher temperatures lead to the removal of sulphur groups and slightly thicker graphite domains, and consequently a decrease of the capacitance., This research was funded by FEDER, the Spanish Ministry of Science, Innovation and Universities MICINN (ENE2017-83976-C2-1-R & ENE2017-83854-R) and by the Aragón Government to the Fuel Conversion Group (T06_17R). DS thanks MICINN for his Ramón y Cajal research contract (RyC-2016-20944)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optimization of the catalytic layer for alkaline fuel cells based on fumatech membranes and ionomer

  • Sebastián del Río, David
  • Lemes Pacheco, Giovanni
  • Luque-Centeno, José Manuel
  • Martínez Huerta, M. Victoria
  • Pardo, Juan Ignacio
  • Lázaro Elorri, María Jesús
8 figures, Polymer electrolyte fuel cells with alkaline anion exchange membranes (AAEMs) have gained increasing attention because of the faster reaction kinetics associated with the alkaline environment compared to acidic media. While the development of anion exchange polymer membranes is increasing, the catalytic layer structure and composition of electrodes is of paramount importance to maximize fuel cell performance. In this work, we examine the preparation procedures for electrodes by catalyst-coated substrate to be used with a well-known commercial AAEM, Fumasep® FAA-3, and a commercial ionomer of the same nature (Fumion), both from Fumatech GmbH. The anion exchange procedure, the ionomer concentration in the catalytic layer and also the effect of membrane thickness, are investigated as they are very relevant parameters conditioning the cell behavior. The best power density was achieved upon ion exchange of the ionomer by submerging the electrodes in KCl (isopropyl alcohol/water solution) for at least one hour, two exchange steps, followed by treatment in KOH for 30 min. The optimum ionomer (Fumion) concentration was found to be close to 50 wt%, with a relatively narrow interval of functioning ionomer percentages. These results provide a practical guide for electrode preparation in AAEM-based fuel cell research., This research was funded by the Ministry of Economy, Industry and Innovation (MICINN) and FEDER, grant number ENE2017-83976-C2-1-R and by the Government of Aragón and FEDER for supporting ‘Grupo de Conversión de Combustibles’, grant number T06_17R. D.S. and J.M.L.-C. acknowledge also MICINN for their Ramón y Cajal research contract (RyC-2016-20944) and Ph.D. grant, respectively. G.L. acknowledges as well Aragón Government for his Ph.D. grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Non-precious melamine/chitosan composites for the oxygen reduction reaction: effect of the transition metal

  • Aghabarari, Behzad
  • Martínez Huerta, M. Victoria
  • Capel Sánchez, María del Carmen
  • Lázaro Elorri, María Jesús
7 figures, 2 tables., The development of active and low-cost electrocatalysts for the oxygen reduction reaction (ORR) is crucial for the sustainable commercialization of fuel cell technologies. In this study, we have synthetized Me/Mo2C (Me = Fe, Co, Cu)-based composites embedded in N- and P-dual doped carbon by means of inexpensive industrial materials, such as melamine and chitosan, as C and N sources, and the heteropolyacid H3PMo12O40 as P and Mo precursor. The effect of the transition metal (Fe, Co, and Cu) on the ORR in alkaline medium has been investigated. The physicochemical properties of the electrocatalysts were performed by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, and transmission electron microscopy (TEM). Activity towards ORR was carried out in a three-electrode cell using a ring-disk electrode in 0.1M NaOH. The results obtained clearly show the important role played by each transition metal (Fe, Co, and Cu) in the electrochemical activity. Among them, Fe gives rise to the best performing composite in carrying out the oxygen reduction reaction. The formation Fe3C/Mo2C species embedded in N- and P-dual doped carbon seems to be the determining role in the increase of the ORR performance., The authors acknowledge the Ministerio de Ciencia, Innovación y Universidades (MCIU), and FEDER for the funding received for the project, with references ENE2017-83976-C2-1-R, Spanish National Research Council COOPB20202, and MERC project 721399002., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Carbon nanofiber-supported tantalum oxides as durable catalyst for the oxygen evolution reaction in alkaline media

  • Ruiz Cornejo, Juan Carlos
  • Vivo Vilches, J. F.
  • Sebastián del Río, David
  • Martínez Huerta, M. Victoria
  • Lázaro Elorri, María Jesús
9 figures, 5 tables.-- Supplementary information available, Active and durable electrocatalysts for the oxygen evolution reaction (OER), capable of replacing noble metal catalysts, are required to develop efficient and competitive devices within the frame of the water electrolysis technology for hydrogen production. In this work, we have investigated tantalum based catalysts supported on carbon nanofibers (CNF) for the first time. The effect of CNF characteristics and the catalyst annealing temperature on the electrochemical response for the OER have been analyzed in alkaline environment using a rotating ring disc electrode (RRDE). The best OER activity and oxygen efficiency were found with a highly graphitic CNF, despite its lower surface area, synthesized at 700 °C, and upon a catalyst annealing temperature of 800 °C. The ordering degree of carbon nanofibers favors the production of oxygen in combination with a low oxygen content in tantalum oxides. The most active catalyst exhibited also an excellent durability., The authors want to thank the Ministerio de Economía, Industria y Competitividad (MICINN) and FEDER for the received funding in the project of reference ENE2017-83976-C2-1-R, and to the Gobierno de Aragón (DGA) for the funding to Grupo de Investigación Conversión de Combustibles (T06_17R). J.C. Ruiz-Cornejo acknowledges DGA for his PhD grant. D. Sebastián acknowledges the MICINN for the Ramón y Cajal research contract (RyC-2016-20944)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Recent progress on bimetallic NiCo and CoFe based electrocatalysts for alkaline oxygen evolution reaction: A review

  • Gebreslase, Gebrehiwet Abrham
  • Martínez Huerta, M. Victoria
  • Lázaro Elorri, María Jesús
16 figures, 10 tables., The deployment of hydrogen as an energy carrier is found to be a vital alternative fuel for the future. It is expected that water electrolysis, powered by renewable energy sources, be able to scale‐up hydrogen production. However, the reaction kinetic of oxygen evolution reaction (OER) is a sluggish process, which predominantly limits the efficiency of water electrolysis. This review recapitulates the recent progress and efforts made in the design and development of two selected earth-abundant bimetallic electrocatalysts (NiCo and CoFe) for alkaline OER. Each bimetal electrocatalyst is thoroughly outlined and discussed in five sub-sections, including bimetal (oxy) hydroxides, Layered double hydroxides (LDHs) structures, oxides, composites, alloy and nanostructured electrocatalysts, and assembled with heteroatoms. Furthermore, a brief introduction to an in situ/operando characterization techniques and advantages for monitoring the structure of the electrocatalysts is provided. Finally, a summary outlining the challenges and conceivable approaches to advance OER performance is highlighted and discussed., Financial support from the European Union’s Horizon 2020 Research and Innovation programme under the Marie Skłodowska-Curie Actions-Innovative Training Networks (MSCA-ITN) Grant Agreement 813748 (Bike project) are gratefully acknowledged. The authors also wish to acknowledge the Ministerio de Ciencia, Innovación y Universidades (MICINN), and FEDER for the received funding in the project of reference ENE2017-83976-C2-1-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Titanium dioxide/N-doped graphene composites as non-noble bifunctional oxygen electrocatalysts

  • Luque-Centeno, José Manuel
  • Martínez Huerta, M. Victoria
  • Sebastián del Río, David
  • Pérez Rodríguez, Sara
  • Lázaro Elorri, María Jesús
11 figures.-- Supplementary information available., Bifunctional oxygen electrocatalysts are essential in the development of low-temperature unitized regenerative fuel cells (URFCs), as a promising alternative for storing energy via hydrogen. TiO2, as a semiconductor material, is commonly not established as an active electrocatalyst for oxygen reduction and oxygen evolution due to its poor electrical conductivity and low reactivity. Here, we demonstrated that composites composed of TiO2 and N-doped graphene can be active in oxygen reduction and evolution reactions in an alkaline environment. Combination factors such anatase/rutile interaction, N-doping graphene, and the presence of Ti3+/Ti–N species raise the active sites and improve the electrochemical activity. Our results may afford an opportunity to develop a non-noble and promising electrocatalyst in energy storage technology., This research was funded by the Ministry of Science, Innovation and Universities and FEDER, grant number ENE2017-83976-C2-1-R, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of secondary heteroatom (S, P) in N-doped reduced graphene oxide catalysts to oxygen reduction reaction

  • Moosapour Siahkalroudi, Zahra
  • Aghabarari, Behzad
  • Vaezi, Mohammadreza
  • Rodríguez-Castellón, Enrique
  • Martínez Huerta, M. Victoria
Heteroatomic dual-doped metal free graphene materials have revealed significant improvement in the electrocatalysis properties for oxygen reduction reaction (ORR) in alkaline anion exchange membrane fuel cells. Here we report a straightforward and cost-effective strategy to fabricate N, S- and N, P- dual-doped reduced graphene oxide electrocatalysts, characterized by similar N/S and N/P ratios. For this purpose, we used ammonium sulfate ((NH<inf>4</inf>)<inf>2</inf>SO<inf>4</inf>) and ammonium monohydrogenphosphate ((NH<inf>4</inf>)<inf>2</inf>HPO<inf>4</inf>) as heteroatom precursors to obtain the desired catalysts by pyrolysis with graphene oxide. Systematic characterization reveals that the secondary heteroatom S has a greater promotional effect than P in ORR. Furthermore, the gap between the onset potentials of N, S- dual-doped graphene and the standard Pt/C is only 30 mV. The results imply that the combination of the N, S heteroatoms and the surface structure in dual-doped reduced graphene oxide lead to a synergistic effect in catalyzing ORR in alkaline media. © 2020 Elsevier B.V., The authors gratefully acknowledge financial support for this research from the Material and Energy Research Centre (MERC) of Iran (project 781396054) and projects RTI2018-099668-BC22 and ENE2017-83976-C2-1-R of Ministerio de Ciencia, Innovación y Universidades of Spain, and project UMA18-FEDERJA-126 of Junta de Andalucía and FEDER funds., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Optimization of the catalytic layer for alkaline fuel cells based on fumatech membranes and ionomer

  • Sebastián, D.
  • Lemes, G.
  • Luque-Centeno, J.M.
  • Martínez-Huerta, M.V.
  • Pardo, J.I.
  • Lázaro, M.J.
Polymer electrolyte fuel cells with alkaline anion exchange membranes (AAEMs) have gained increasing attention because of the faster reaction kinetics associated with the alkaline environment compared to acidic media. While the development of anion exchange polymer membranes is increasing, the catalytic layer structure and composition of electrodes is of paramount importance to maximize fuel cell performance. In this work, we examine the preparation procedures for electrodes by catalyst-coated substrate to be used with a well-known commercial AAEM, Fumasep® FAA-3, and a commercial ionomer of the same nature (Fumion), both from Fumatech GmbH. The anion exchange procedure, the ionomer concentration in the catalytic layer and also the effect of membrane thickness, are investigated as they are very relevant parameters conditioning the cell behavior. The best power density was achieved upon ion exchange of the ionomer by submerging the electrodes in KCl (isopropyl alcohol/water solution) for at least one hour, two exchange steps, followed by treatment in KOH for 30 min. The optimum ionomer (Fumion) concentration was found to be close to 50 wt%, with a relatively narrow interval of functioning ionomer percentages. These results provide a practical guide for electrode preparation in AAEM-based fuel cell research.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Titanium Dioxide/N-Doped Graphene Composites as Non-Noble Bifunctional Oxygen Electrocatalysts

  • Luque-Centeno, J.M.
  • Martínez-Huerta, M.V.
  • Sebastián, D.
  • Pérez-Rodríguez, S.
  • Lázaro, M.J.
Bifunctional oxygen electrocatalysts are essential in the development of low-temperature unitized regenerative fuel cells (URFCs), as a promising alternative for storing energy via hydrogen. TiO2, as a semiconductor material, is commonly not established as an active electrocatalyst for oxygen reduction and oxygen evolution due to its poor electrical conductivity and low reactivity. Here, we demonstrated that composites composed of TiO2 and N-doped graphene can be active in oxygen reduction and evolution reactions in an alkaline environment. Combination factors such anatase/rutile interaction, N-doping graphene, and the presence of Ti3+/Ti–N species raise the active sites and improve the electrochemical activity. Our results may afford an opportunity to develop a non-noble and promising electrocatalyst in energy storage technology.