Skip to main content

OPTIMIZACION DE ELECTROCATALIZADORES BASADOS EN NANOCOMPOSITES HIBRIDOS ESTABLES PARA PILAS DE COMBUSTIBLE, ELECTROLIZADORES Y PILAS REGENERATIVAS

ENE2017-83976-C2-1-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 29
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Carbon xerogels electrochemical oxidation and correlation with their physico-chemical properties

  • Alegre Gresa, Cinthia
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
10 Figuras, 8 Tablas.-- Material suplementario disponible en línea en la página web del editor., The electrochemical oxidation of carbon represents a relevant limitation for the application of carbon-based materials at the electrodes of several electrochemical devices, like fuel cells, metal-air batteries, water electrolyzers or supercapacitors. Understanding the key influencing parameters is thus of paramount importance to prevent and avoid the degradation of carbon materials. In the present investigation, carbon xerogels (CXGs) as a model of synthetic amorphous carbon, were studied on the basis of different surface chemistry and structure. Electro-oxidation experiments consisted of potential holding (1.2 V vs. RHE) on electrodes prepared with CXGs. The results indicate that the presence of oxygen groups (-C-O) and a higher ordering degree hinder the carbon oxidation reaction. A sub-structural parameter considering both the amount of oxygen-free carbon atoms (C-C + C*-C-O) from X-ray photoelectron spectroscopy, and the disordering degree from Raman spectra (in terms of ID/IG) is here proposed as a new factor to evaluate the tendency of an amorphous carbon material, like xerogels, to be electrochemically oxidized., Authors acknowledge financial support given by Spanish Ministry of Science, Innovation and University (MICINN) through project ENE2017-83976-C2-1-R (co-founded by FEDER) and from Aragón Government to the Fuel Conversion Group. C. Alegre and D. Sebastián acknowledge also MICINN for their Juan de la Cierva (FJCI-2015-25560) and Ramón y Cajal (RyC-2016-20944) research contracts, respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electrochemical oxidation of ordered mesoporous carbons and the influence of graphitization

  • Pérez Rodríguez, Sara
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
6 Figuras.- 4 Tablas.- Datos suplementarios disponibles en línea en la página web del editor., Ordered mesoporous carbon materials (OMC), obtained by the template carbonization pathway from silica templates (sacrificial method), exhibit promising features for many applications mainly due to their large surface area. Graphitization is a common approach to improve the electrical conductivity and degradation resistance. We have investigated the graphitization of two different OMC at 1500 °C and the electrochemical oxidation by potential holding at 1.4 V vs. reversible hydrogen electrode (RHE) in acidic electrolyte. Graphitization conducts to a significant reduction of the electrooxidation associated charge, between 50 and 90% depending on the carbon properties, together with a decrease of surface area of 35–48%. The materials still exhibit a large electrochemical surface area, according to electrochemical impedance and cyclic voltammetry experiments. Upon electrooxidation, the relative amount of oxygen increases according to a comparative analysis of X-ray photoelectron spectroscopy test of the electrodes before and after potential holding. The results are of interest to define strategies towards the amelioration of carbon degradation by electrooxidation in electrochemical devices., The authors gratefully acknowledge financial support given by Spanish Ministry of Science, Innovation and Universities MICINN (ENE2017-83976-C2-1-R) and to the Aragón Government to the Fuel Conversion Group (T06_17R). DS acknowledges also MICINN for his Ramón y Cajal contract (RyC-2016-20944)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ni-Based composites from chitosan biopolymer a one-step synthesis for oxygen evolution reaction

  • Aghabarari, Behzad
  • Luque-Centeno, José Manuel
  • Capel Sánchez, María del Carmen
  • Lázaro Elorri, María Jesús
  • Martínez Huerta, M. Victoria
Cost-efficient and sustainable electrocatalysts for oxygen evolution reaction (OER) is highly desired in the search for clean and renewable energy sources. In this study, we develop a new one-step synthesis strategy of novel composites based on Ni and molybdenum carbide embedded in N- and P-dual doped carbon matrices using mainly chitosan biopolymer as the carbon and nitrogen source, and molybdophosphoric acid (HMoP) as the P and Mo precursor. Two composites have been investigated through annealing a mixture of Ni/chitosan and HMoP with two unlike carbon matrices, melamine and graphene oxide, at a high temperature. Both composites exhibit similar multi-active sites with high electrocatalytic activity for OER in an alkaline medium, which is comparable to the IrO2 catalyst. For this study, an accurate measurement of the onset potential for O2 evolution has been used by means of a rotating ring-disk electrode (RRDE). The use of this method allows confirming a better stability in the chitosan/graphene composite. This work serves as a promising approach for the conversion of feedstock and renewable chitosan into desired OER catalysts., By the Spanish Ministry of Science, Innovation and Universities, through project ENE2017-83976-C2-1-R (co-founded by FEDER), the Spanish National Research Council (CSIC) through project iCOOP20202 and MERC grant project 99392002., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tantalum-based electrocatalysts prepared by a microemulsion method for the oxygen reduction and evolution reactions

  • Ruiz Cornejo, Juan Carlos
  • Sebastián del Río, David
  • Martínez Huerta, M. Victoria
  • Lázaro Elorri, María Jesús
13 Figures, 7 Tables.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Bifunctional catalysts for oxygen electrodes, active for both the oxygen reduction and evolution reactions (ORR, OER), are highly desirable for the development of electrochemical energy conversion devices. In this work, carbon-supported tantalum based catalysts were synthesized by a microemulsion procedure from tantalum ethoxide through a fast hydrolysis reaction followed by heat treatment. The nature and composition of the different tantalates and oxides (general formula NaaTabOc, with a/b = 0–1 and c/b = 2.5–3) relied on the concentration of ethanol as well as on the annealing temperature, with Na2Ta8O21 as predominant crystal phase in all cases. High annealing temperatures resulted in a certain degree of oxygen substoichiometry, which creates defects responsible of electrocatalytic activity. The electrochemical response for the oxygen reduction and the oxygen evolution reactions in alkaline electrolyte (0.1 M NaOH) was evaluated for the first time in this type of materials. The presence of Na2Ta8O21 phase over other oxides/tantalates, a high crystallinity of such Ta-phase, and the oxygen substoichiometry are the three parameters playing a relevant role to favor ORR and OER electro-activity. The best formulations were found in a trade-off situation using 3% ethanol and annealing at 900 °C., The authors wish to acknowledge the Ministerio de Ciencia, Innovación y Universidades (MICINN) and FEDER for the received funding in the project of reference ENE2017-83976-C2-1-R, as well as to the Gobierno de Aragón (DGA) for the funding to Grupo de Investigación Conversión de Combustibles (T06_17R). J.C. Ruiz-Cornejo acknowledges also DGA his PhD grant. D. Sebastián acknowledges also MICINN for his Ramón y Cajal research contract (RyC-2016-20944)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Titanium carbonitride-graphene composites assembled with organic linkers as electrocatalytic supports for methanol oxidation reaction

  • Roca-Ayats, M.
  • Yeung, King Lun
  • Hernández Caricol, Margarita
  • Chen, W. Y.
  • Deng, Ran
  • García Fierro, José Luis
  • Lázaro Elorri, María Jesús
  • Martínez Huerta, M. Victoria
10 Figures, 2 Tables.-- Supplementary information available.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, In the present work, the effect of different composites as electrocatalytic supports for the methanol oxidation reaction is evaluated. Two different TiCN-rGO composites, using organic compounds as linkers were synthesized. Subsequently, platinum was incorporated in the form of nanoparticles, and the electrocatalysts were characterized and compared with similar nanoparticles supported on TiCN. The electrocatalysts were characterized by XPS, TEM, XRD, Raman and FTIR spectroscopies and ICP-MS and the catalytic performance toward COads and methanol oxidations was evaluated. Results showed that the platinum nanoparticles were preferentially deposited on top of the TiCN particles rather than on the reduced graphene oxide, which allowed the nanoparticles to benefit from the TiCN electronic promoting effect. In addition, the presence of reduced graphene oxide contributes on the improvement of the morphological properties of the electrocatalyst, reducing the agglomeration degree of the particles and considerably enhancing the catalytic mass activities., Authors acknowledge financial support given by Spanish Ministry of Science, Innovation and Universities, through project ENE2017-83976-C2-1-R (co-founded by FEDER), Spanish National Research Council (CSIC) through project i-LINK1106 and Aragon Gouverment through Fuel Conversion Group (co-founded by FEDER)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

N-doped graphene catalysts with high nitrogen concentration for the oxygen reduction reaction

  • Lemes Pacheco, Giovanni
  • Sebastián del Río, David
  • Pastor Tejera, Elena
  • Lázaro Elorri, María Jesús
9 Figures, 3 Tables.-- Informacion suplementaria disponible en línea en la página web del editor.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Nitrogen doped reduced graphene oxide (NrGO) catalysts and composites of these with carbon nitride (CN) with nitrogen content as high as 19.8 wt% and 35.8 wt%, respectively, have been synthesized by thermal annealing of multilayer graphene oxide and urea at different temperatures. Nitrogen has been effectively introduced as a mix of pyridinic, pyrrolic, pyridonic and quaternary bonding configurations into the carbon lattice of graphene upon removal of CN phase over 650 °C. The electrocatalytic activity towards oxygen reduction reaction (ORR) in 0.1 M NaOH has been investigated. NrGO catalysts with less nitrogen content show better performance than composites. NrGO produced at 800 °C presents the best activity with half-wave potential of 0.76 V vs. RHE and a mean number of electrons of 3.7, which are close to a commercial Pt/C catalyst. This study concludes that a high concentration of nitrogen atoms in multilayer reduced graphene oxide does not necessarily produce a highly active electrocatalyst, suggesting that carbon in the neighbourhood of nitrogen atoms are the active sites for ORR in alkaline medium., Authors acknowledge the financial support given by the Spanish Ministry of Science, Innovation and Universities (MICINN) through projects ENE2014-52158-C2-1-R and 2-R and ENE2017-83976-C2-1-R and 2-R (co-founded by FEDER) and Aragón Government to support “Grupo de Conversion de Combustibles” (T06_17R). G. Lemes and D. Sebastián thank the Aragón Government and MICINN for their Ph.D. grant and Ramón y Cajal research contract (RyC-2016-20944), respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

CoTiO3/NrGO nanocomposites for oxygen evolution and oxygen reduction reactions: Synthesis and electrocatalytic performance

  • Luque-Centeno, José Manuel
  • Martínez Huerta, M. Victoria
  • Sebastián del Río, David
  • Pardo, Juan Ignacio
  • Lázaro Elorri, María Jesús
11 Figuras, 3 Tablas.-- Material suplementario disponible en línea en la página web del editor., Oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) catalysts play an important role in energy conversion and storage devices, but highly active and robust nonprecious metal catalysts are required to address the cost and durability issues. In this work, a modified gel methodology has been used to obtain nanocomposites of perovskite CoTiO3 and N-doped reduced graphene oxide (NrGO). Moreover, the influence of the annealing extent in the synthesis has been studied. The composites show higher activity in oxygen evolution and reduction reactions in alkaline environment compared to sole ilmenite, which is related to a strong interaction between cobalt titanate and NrGO carbon matrix. The annealing duration appears as a key variable to modulate the physicochemical properties and the electrochemical behavior. The composite prepared at the largest duration (3 h) exhibit enhanced bifunctional properties for ORR and OER, with onset potentials of 0.93 V and 1.53 V vs. RHE respectively, which is mainly attributed to higher concentration of nitrogen, larger extent of defects and/or the presence of more oxidized Co species in the nanocomposite., The authors wish to acknowledge the Ministerio de Ciencia, Innovación y Universidades (MICINN) and FEDER for the received funding in the project of reference ENE2017-83976-C2-1-R. Thanks also to the Gobierno de Aragón (DGA) the funding for the Grupo de Investigación Conversión de Combustibles (T06_17R). J. M. Luque also thanks MICINN for its Ph.D. grant. D. Sebastián acknowledges the MICINN for the contract Ramón y Cajal (RyC-2016-20944)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Graphene oxide nanofibers: A nanocarbon material with tuneable electrochemical properties

  • Torres Gamarra, Daniel
  • Pérez Rodríguez, Sara
  • Sebastián del Río, David
  • Pinilla Ibarz, José Luis
  • Lázaro Elorri, María Jesús
  • Suelves Laiglesia, Isabel
8 Figures, 3 Tables.-- Supplementary material.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, We report the electrochemical properties of a novel nanocarbon material obtained by chemical oxidation and ultrasound-assisted exfoliation of fishbone carbon nanofibers (CNF). The resulting material maintains its tubular morphology and presents a characteristic interlayer spacing of graphene oxide (above 0.75 nm). Thus, this is called graphene oxide nanofibers (GONF). The new rearrangement of the accessible sp2-carbon domains makes the GONF a potential alternative for electrochemical energy conversion/storage applications, showing a developed porosity and tuneable surface chemistry. The influence of the oxidation degree of GONF on its electrochemical behaviour in 0.5 M H2SO4 is reported. Cyclic voltammetry and electrochemical impedance spectroscopy evidenced a significant increase of the capacitance for GONF, being 4–27 times higher than that obtained for pristine CNF. An optimum in the capacitance (49.2 F g−1) was obtained using an oxidation ratio (OR = KMnO4/Sample) of 6 and 60 min of sonication. The latter is ascribed to the unique structure of this material containing both graphitic and graphene oxide domains. Higher OR or longer sonication times led to a partial loss of graphitic domains and higher contribution of micropores, which worsen the fast ion/electrolyte transport. Additionally, the optimized material exhibited an improved activity for the hydrogen evolution reaction., This work was funded by FEDER, the Spanish Ministry of Science, Innovation and Universities MICINN (ENE2017-83976-C2-1-R & ENE2017-83854-R) and by the Aragón Government to the Fuel Conversion Group (T06_17R). DS thanks MICINN for his Ramon y Cajal research contract (RyC-2016-20944)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Insights on the electrochemical oxidation of ordered mesoporous carbons

  • Pérez Rodríguez, Sara
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
6 Figures, 3 Tables., Ordered mesoporous carbon materials (OMC) present a developed porosity, making them promising candidates for electrochemical energy-conversion devices. However, OMC undergo electrochemical oxidation causing the degradation of electrodes and exhibit low electrical conductivities due to their amorphous carbon structure. To address these issues, OMC can be graphitized by thermal treatments. Herein, the electrooxidation behavior of different OMC, prior and upon graphitization, is studied by chronoamperometry in a highly acidic electrolyte (0.5 M H2SO4). Several oxidation potentials and temperatures are used to gain insights on the electrooxidation mechanism. Potential holding tests evidenced differences in the oxidation behavior of as-synthesized and graphitized materials. Graphitization results in a strong decrease of the oxidation charge from 93 to 7% depending on the carbon properties, applied potential and temperature. Temperature plays an important role on carbon degradation of not-graphitized OMC, with a strong electrochemical capacitance loss (90%–93%) after tests at 40 °C and 60 °C. Conversely, graphitized materials present a raise of the capacitance by the creation of oxygen-functionalities as confirmed by post-mortem X-ray photoelectron spectra analysis. Additionally, graphitized materials show an increase of the apparent activation energy associated to electrooxidation (7 times higher), indicative of their improved resistance., The authors gratefully acknowledge financial support given by Spanish Ministry of Science, Innovation and Universities MICINN (ENE2017-83976-C2-1-R) and to the Aragón Government to the Fuel Conversion Group (T06_17R). DS acknowledges also MICINN for his Ramón y Cajal contract (RyC-2016-20944)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Catalizadores libres de metal para el cátodo de las pilas de combustible basados en materiales grafénicos dopados

  • Lemes Pacheco, Giovanni
  • Sebastián del Río, David
  • Pastor Tejera, Elena
  • Lázaro Elorri, María Jesús
1 Figuras.-- Presentado en las XXXVI Jornadas Nacionales de Ingeniería Química, JNIQ 2019, Zaragoza, 4-6 Sep. 2019., Los materiales nanoestructurados de carbono han recibido un creciente interés para ser utilizados como electrocatalizadores debido a que su configuración electrónica superficial presenta abundantes electrones tipo π. Esta configuración es de relevancia para reacciones con alta demanda de electrones como las que ocurren en los dispositivos electroquímicos de conversión de energía (baterías, pilas de combustible, etc.). En este sentido las pilas de combustible permiten la conversión directa de energía química (por ejemplo del hidrógeno) en energía eléctrica con una eficiencia elevada y representan una solución para una producción eléctrica no contaminante. Sin embargo, la cinética lenta de la reacción de reducción de oxígeno (ORR), que ocurre en el cátodo, hace necesaria la utilización de electrodos basados en platino, que debido a su coste y escasez, limita la implementación a gran escala de estos dispositivos. Se han estudiado diversas estrategias para sustituir al platino, y entre ellas, los materiales de carbono dopados aparecen como una alternativa prometedora en cuanto a disponibilidad y coste, pero que en la actualidad muestran aún baja actividad y estabilidad. En particular, se espera que las estructuras derivadas de grafeno presenten gran actividad catalítica debido a su especial morfología 2D con elevada área superficial, buena conductividad eléctrica y resistencia mecánica y química. Además, las estrategias de dopado con heteroátomos como N, S, P y B modifican la distribución electrónica creando defectos puntuales que facilitan la adsorción de la molécula de O2. En este trabajo se aplican distintas estrategias de síntesis de electrocatalizadores de grafeno dopados con N, S, P o B y se investiga la relación entre sus propiedades y su actividad para la ORR., Los autores agradecen al Ministerio de Ciencia, Innovación y Universidades (MICINN) y FEDER por el apoyo a través del Proyecto ENE2017-83976-C2-1-R y 2-R. G.L. agradece al Gobierno de Aragón por su subvención doctoral. D.S. agradece al MICINN la concesión de su contrato Ramón y Cajal RyC-2016-20944., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Carbon-supported Ta-based electrocatalysts for the oxygen reduction and evolution reactions

  • Ruiz Cornejo, Juan Carlos
  • Sebastián del Río, David
  • Martínez Huerta, M. Victoria
  • Lázaro Elorri, María Jesús
Poster presented at CARBON 2019, The world conference on carbon, 14th-19th july 2019, Lexington, Kentucky (U.S.A.), Electrocatalytic materials with high efficiency for the main reactions on bifunctional oxygen electrodes, the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), are necessary for the development of new emerging electrochemical energy storage and conversion devices. Although some noble metals such as Pt and metal oxides (RuO2, IrO2) possess excellent activity as electrocatalysts, their high cost and instability hinder large-scale applications. Tantalum-based materials have demonstrated to be active and robust electrocatalysts for the ORR in acidic environment1. They have an excellent electrochemical stability and become active for the oxygen reactions when the surface stoichiometry is tuned2. Carbon materials can act both as support and electron conductor phase. In this work, nanocomposites based on tantalum sub-oxides on carbon black have been investigated for the ORR and OER3., The authors wish to acknowledge the Ministerio de Ciencia, Innovación y Universidades (MICINN) and FEDER for the received funding in the project of reference ENE2017-83976-C2-1-R, as well as to the Gobierno de Aragón (DGA) and FEDER for the funding to Grupo de Investigación Conversión de Combustibles (T06_17R). J.C. Ruiz-Cornejo acknowledges also DGA his PhD grant. D. Sebastián acknowledges also MICINN for his Ramón y Cajal research contract (RyC-2016-20944)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Supporting IrO2 and IrRuOx nanoparticles on TiO2 and Nb-doped TiO2 nanotubes as electrocatalysts for the oxygen evolution reaction

  • Genova-Koleva, Radostina V.
  • Alcaide, Francisco
  • Álvarez, Garbiñe
  • Cabot, Pere L.
  • Grande, Hans-Jürgen
  • Martínez Huerta, M. Victoria
  • Miguel, Óscar
[EN] IrO 2 and IrRuO x (Ir:Ru 60:40 at%), supported by 50 wt% onto titania nanotubes (TNTs) and (3 at% Nb) Nb-doped titania nanotubes (Nb-TNTs), as electrocatalysts for the oxygen evolution reaction (OER), were synthesized and characterized by means of structural, surface analytical and electrochemical techniques. Nb doping of titania significantly increased the surface area of the support from 145 (TNTs) to 260 m 2 g −1 (Nb-TNTs), which was significantly higher than those of the Nb-doped titania supports previously re- ported in the literature. The surface analytical techniques showed good dispersion of the catalysts onto the supports. The X-ray photoelectron spectroscopy analyses showed that Nb was mainly in the form of Nb(IV) species, the suitable form to behave as a donor introducing free electrons to the conduction band of titania. The redox transitions of the cyclic voltammograms, in agreement with the XPS results, were found to be reversible. Despite the supported materials presented bigger crystallite sizes than the unsupported ones, the total number of active sites of the former was also higher due to their better cat- alyst dispersion. Considering the outer and the total charges of the cyclic voltammograms in the range 0.1–1.4 V, stability and electrode potentials at given current densities, the preferred catalyst was IrO 2 sup- ported on the Nb-TNTs. The electrode potentials corresponding to given current densities were between the smallest ones given in the literature despite the small oxide loading used in this work and its Nb doping, thus making the Nb-TNTs-supported IrO 2 catalyst a promising candidate for the OER. The good dispersion of IrO 2 , high specific surface area of the Nb-doped supports, accessibility of the electroactive centers, increased stability due to Nb doping and electron donor properties of the Nb(IV) oxide species were considered the main reasons for its good performance., The authors would like to thank to EU FP7 SUSHGEN Network project No. 238678 and project ENE2017-83976-C2-1-R (AEI/FEDER, EU)). The facilities of the Centres Científics i Tecnològics de la Universitat de Barcelona (CCiT-UB) are also acknowledged for the struc- tural and surface analyses.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Capacitance enhancement of hydrothermally reduced graphene oxide nanofibers

  • Torres Gamarra, Daniel
  • Pérez Rodríguez, Sara
  • Sebastián del Río, David
  • Pinilla Ibarz, José Luis
  • Lázaro Elorri, María Jesús
  • Suelves Laiglesia, Isabel
9 figures, 4 tables., Nanocarbon materials present sp2-carbon domains skilled for electrochemical energy conversion or storage applications. In this work, we investigate graphene oxide nanofibers (GONFs) as a recent interesting carbon material class. This material combines the filamentous morphology of the starting carbon nanofibers (CNFs) and the interlayer spacing of graphene oxide, and exhibits a domain arrangement accessible for fast transport of electrons and ions. Reduced GONFs (RGONFs) present the partial removal of basal functional groups, resulting in higher mesoporosity, turbostratic stacking, and surface chemistry less restrictive for transport phenomena. Besides, the filament morphology minimizes the severe layer restacking shown in the reduction of conventional graphene oxide sheets. The influence of the reduction temperature (140–220 °C) on the electrochemical behaviour in aqueous 0.5 M H2SO4 of RGONFs is reported. RGONFs present an improved capacitance up to 16 times higher than GONFs, ascribed to the unique structure of RGONFs containing accessible turbostratic domains and restored electronic conductivity. Hydrothermal reduction at 140 °C results in the highest capacitance as evidenced by cyclic voltammetry and electrochemical impedance spectroscopy measurements (up to 137 F·g−1). Higher temperatures lead to the removal of sulphur groups and slightly thicker graphite domains, and consequently a decrease of the capacitance., This research was funded by FEDER, the Spanish Ministry of Science, Innovation and Universities MICINN (ENE2017-83976-C2-1-R & ENE2017-83854-R) and by the Aragón Government to the Fuel Conversion Group (T06_17R). DS thanks MICINN for his Ramón y Cajal research contract (RyC-2016-20944)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optimization of the catalytic layer for alkaline fuel cells based on fumatech membranes and ionomer

  • Sebastián del Río, David
  • Lemes Pacheco, Giovanni
  • Luque-Centeno, José Manuel
  • Martínez Huerta, M. Victoria
  • Pardo, Juan Ignacio
  • Lázaro Elorri, María Jesús
8 figures, Polymer electrolyte fuel cells with alkaline anion exchange membranes (AAEMs) have gained increasing attention because of the faster reaction kinetics associated with the alkaline environment compared to acidic media. While the development of anion exchange polymer membranes is increasing, the catalytic layer structure and composition of electrodes is of paramount importance to maximize fuel cell performance. In this work, we examine the preparation procedures for electrodes by catalyst-coated substrate to be used with a well-known commercial AAEM, Fumasep® FAA-3, and a commercial ionomer of the same nature (Fumion), both from Fumatech GmbH. The anion exchange procedure, the ionomer concentration in the catalytic layer and also the effect of membrane thickness, are investigated as they are very relevant parameters conditioning the cell behavior. The best power density was achieved upon ion exchange of the ionomer by submerging the electrodes in KCl (isopropyl alcohol/water solution) for at least one hour, two exchange steps, followed by treatment in KOH for 30 min. The optimum ionomer (Fumion) concentration was found to be close to 50 wt%, with a relatively narrow interval of functioning ionomer percentages. These results provide a practical guide for electrode preparation in AAEM-based fuel cell research., This research was funded by the Ministry of Economy, Industry and Innovation (MICINN) and FEDER, grant number ENE2017-83976-C2-1-R and by the Government of Aragón and FEDER for supporting ‘Grupo de Conversión de Combustibles’, grant number T06_17R. D.S. and J.M.L.-C. acknowledge also MICINN for their Ramón y Cajal research contract (RyC-2016-20944) and Ph.D. grant, respectively. G.L. acknowledges as well Aragón Government for his Ph.D. grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Non-precious melamine/chitosan composites for the oxygen reduction reaction: effect of the transition metal

  • Aghabarari, Behzad
  • Martínez Huerta, M. Victoria
  • Capel Sánchez, María del Carmen
  • Lázaro Elorri, María Jesús
7 figures, 2 tables., The development of active and low-cost electrocatalysts for the oxygen reduction reaction (ORR) is crucial for the sustainable commercialization of fuel cell technologies. In this study, we have synthetized Me/Mo2C (Me = Fe, Co, Cu)-based composites embedded in N- and P-dual doped carbon by means of inexpensive industrial materials, such as melamine and chitosan, as C and N sources, and the heteropolyacid H3PMo12O40 as P and Mo precursor. The effect of the transition metal (Fe, Co, and Cu) on the ORR in alkaline medium has been investigated. The physicochemical properties of the electrocatalysts were performed by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, and transmission electron microscopy (TEM). Activity towards ORR was carried out in a three-electrode cell using a ring-disk electrode in 0.1M NaOH. The results obtained clearly show the important role played by each transition metal (Fe, Co, and Cu) in the electrochemical activity. Among them, Fe gives rise to the best performing composite in carrying out the oxygen reduction reaction. The formation Fe3C/Mo2C species embedded in N- and P-dual doped carbon seems to be the determining role in the increase of the ORR performance., The authors acknowledge the Ministerio de Ciencia, Innovación y Universidades (MCIU), and FEDER for the funding received for the project, with references ENE2017-83976-C2-1-R, Spanish National Research Council COOPB20202, and MERC project 721399002., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Tesis doctoral (DoctoralThesis)

Electrocatalizadores bifuncionales basados en grafeno dopado con N y modificados con Ti y Co para pilas de combustible regenerativas en una unidad

  • Luque-Centeno, José Manuel
Tesis doctoral presentada para la obtención del grado de Doctor en Electroquímica, Ciencia y Tecnología por la Universidad de Córdoba, el 13 de mayo 2021.-- Sobresaliente "cum laude"., [EN] The increasing demand of energy that humanity had suffer in the last times, added to the global warming expanse associated to the fossil fuels used as main energy source, have made that the humanity has to afford one of its highest challenges: the search for new sources of sustainable energy. Currently, the use of electrochemical energy conversion systems like fuel cells (FC) and electrolysers (PEM) have been raised as good candidate to solve this problem. These kinds of devices are so important than some government agencies like European Union have proposed some strategies in order to develop the use of green H2 as alternative for the generation of electrical energy. In Spain, according with de UE guidelines, some strategies like the pickups on “Hoja de Ruta del Hidrógeno: una apuesta por el hidrógeno renovable ” or “Estrategia de almacenamiento energético ” remarks the importance of contribute to the improvement of these technologies in order to reach a more sustainable future. Development of these technologies have its main limitation in the oxygen electrode reaction, which are the oxygen reduction (ORR) and evolution (OER) reactions, whose high equilibrium potential (1.23 V vs RHE) make necessary the use of catalysts based on noble metals which increase significantly the cost of manufacture. To solve this, in the last decade the efforts have been focused in the use of carbon-based materials as catalysts combined with early transition metals, creating a new range of materials named composites, whose high conductivity, availability and stability make them good candidates to substitute actual noble metal-based catalysts as Pt or Ir. For this reason, the aim of this doctoral thesis is the design and optimization of a synthesis method which allow the obtention of composites prepared by combining nitrogen doped graphene with Ti and Co nanoparticles. This work has been focused in the optimization of some parameters as the precursor mixture preparation, in order to obtain different n-doped graphene structures, and the pyrolysis temperature and time for the thermal reduction step. In the first part of this study, a new synthesis method has been employed to prepare nitrogen doped graphene modified with Ti or Co nanoparticles. Prepared materials have been characterized by different techniques in order to determine the physicochemical and catalytic properties of monometallic composites. In addition, the influence of the pyrolysis time has been studied for 1, 2 and 3 hours in the Ti-based materials, finding some differences in the nature of the Ti found phases. A Co-based monometallic composite has been prepared and their properties have been compared with the monometallic Ti-based composites. The core part of this doctoral thesis has been focused on the study of the combined effect of Ti and Co in the same composite. To do this, synthesis method has been modified in order to introduce Ti and Co at the same time. In addition, to optimize the synthesis method, some parameters like pyrolysis temperature (700 – 800 ºC) and time (1 – 2 – 3h) have been compared. The evolution of the founded phases in each material has been studied through physicochemical techniques which have revealed the presence of different metal oxides according to the pyrolysis temperature employed for the thermal reduction procedure. However, the time pyrolysis influence has been determined. From these results, the best synthesis condition to obtain the best electrocatalytic performance have been selected as base for the preparation of a new synthesis method for the obtention of three-dimensional graphene structures, called graphene cryogels, with the aim of increase the specific BET area of catalysts. In addition, from this synthesis, the effect of Co precursor has been studied too. By these studies have been confirmed an increase of BET area in all synthetized cryogels. However, the physicochemical properties study has shown significant differences according to the employed Co precursor. Catalytic performance of synthetized materials, stability and bifunctionality towards OER and ORR have been measured by a three-electrode system in order to determine which catalysts have the best performance. Those which have shown the best bifunctional behaviour have been tested by advanced electrochemical techniques like gas diffusion electrode (GDE) and a prototype URFC system. The comparison between reduced graphene-based materials has been demonstrated that the designed synthesis method allows the obtention of Ti-based composites with good performance as catalysts for the ORR, compared with similar materials reported on literature. In addition, by combining both metals, some properties like catalytic performance of stability have been upgraded. Composites based on cryogels have shown a better performance in advanced electrochemical techniques like GDE, having a better behaviour as bifunctional catalysts and being more stable than reduced graphene-based catalysts., [ES] El aumento de la demanda energética que ha experimentado la humanidad en los últimos años, sumado al incesante avance del calentamiento global asociado al uso de combustibles fósiles como principal fuente de energía, han hecho que en la actualidad la humanidad se enfrente a uno de los mayores retos de su historia: la búsqueda de nuevas fuentes de energía más sostenibles. En la actualidad, el uso de sistemas de conversión electroquímica de energía, como electrolizadores y pilas de combustible, se postula como un buen candidato para solventar este problema. Tal es la importancia de estos dispositivos que ya se han planteado numerosas estrategias por los gobiernos de la Unión Europea para favorecer la transición energética hacia el H2 verde. En el caso de España, estrategias como las recogidas en “Hoja de Ruta del Hidrógeno: una apuesta por el hidrógeno renovable ” o la “Estrategia de almacenamiento energético ” recalcan la importancia de contribuir en el desarrollo de estas tecnologías para alcanzar un futuro más sostenible. El desarrollo de estas tecnologías tiene su principal limitación en las reacciones que implican al O2, como son la evolución (OER) y reducción de oxígeno (ORR), las cuales, debido a su alto potencial de equilibrio (1,23 V frente al electrodo reversible de hidrógeno), hacen que sea necesario el empleo de catalizadores basados en metales nobles que encarecen significativamente el coste de estos dispositivos. Para tratar de solucionar esto, en la última década se han centrado los esfuerzos en el uso de materiales carbonosos como catalizadores, en combinación con metales de la primera serie de transición, dando lugar a una nueva gama de materiales denominados composites o materiales compuestos, cuya alta conductividad, abundancia y estabilidad los han convertido en buenos candidatos para sustituir a los catalizadores basados en metales nobles como Pt o Ir que se emplean en la actualidad. Es por esto que el objetivo de esta tesis doctoral es el diseño y optimización de un método de síntesis que permita la obtención de materiales compuestos preparados mediante la combinación de grafenos dopados con nitrógeno y nanopartículas de óxidos de Ti y Co. El trabajo se ha centrado en la optimización de variables como la preparación del material precursor con el fin de obtener diferentes estructuras de grafeno dopado nitrógeno, así como, la temperatura y el tiempo de pirólisis durante el proceso de reducción térmica. En la primera parte de este estudio se ha llevado a cabo el diseño de un método de síntesis para la obtención de grafenos reducidos dopados con nitrógeno y modificado con nanopartículas de Ti o Co, con el fin de determinar tanto las propiedades físico-químicas, como catalíticas, de los composites monometálicos. En este estudio, además, se ha estudiado la influencia del tiempo (1 – 2 – 3 horas) en el método de síntesis empleado para la preparación de composites modificados con Ti, observándose algunas diferencias en la naturaleza de las fases de Ti encontradas. A continuación, se ha preparado un catalizador modificado con Co y sus propiedades han sido comparadas con el mejor de los catalizadores modificados con Ti. La parte central de la tesis doctoral se ha centrado en el estudio del efecto combinado de ambos metales en un mismo composite. Para ello, se ha modificado el método de síntesis para modificar el grafeno dopado con nitrógeno con Ti y Co en una sola etapa. Para optimizar el método de síntesis se han comparado distintos materiales preparados a dos temperaturas de reacción (700 – 800 ºC) y distintos tiempos de reacción (1 – 2 – 3 horas). La evolución de las fases encontradas en cada material ha sido estudiada a partir de técnicas físico-químicas, a través de las cuales se ha podido determinar la aparición de distintos óxidos metálicos en función de la temperatura de pirólisis empleada para la reducción de los materiales. Así mismo, al igual que ocurría en los materiales monometálicos, se ha podido determinar la evolución de las fases metálicas, así como la naturaleza de la fase grafénica en función del tiempo de pirólisis empleado. A partir de los estudios anteriores, se han tomado las condiciones en las que han obtenido los catalizadores con el mejor rendimiento electrocatalítico como base para la preparación de un nuevo método de síntesis que permita la obtención de estructuras tridimensionales de grafeno, denominadas criogeles de grafeno, con el objetivo de aumentar el área BET de los catalizadores. Además, a partir de esta síntesis se ha estudiado el efecto de la sal del Co utilizada como precursor en las propiedades de los catalizadores obtenidos. Los estudios llevados a cabo a partir de la determinación de las isotermas de absorción de los materiales, ha permitido confirmar un aumento significativo del área BET en todos los criogeles sintetizados. Así mismo, el estudio de las propiedades físico-químicas de los materiales ha revelado diferencias significativas en los materiales en función del precursor de Co empleado. El comportamiento electrocatalítico de los materiales, así como, su estabilidad y su bifuncionalidad para la OER y la ORR ha sido caracterizado mediante un sistema electroquímico de tres electrodos para determinar aquella combinación de materiales con mayor actividad electrocatalítica. Aquellos que han presentado el mejor comportamiento bifuncional han sido además caracterizados por técnicas electroquímicas avanzadas como el electrodo de difusión de gases (GDE) y un sistema prototipo de pila de combustible regenerativa. Comparando el comportamiento de los materiales basados en grafenos reducidos dopado con nitrógeno, se ha podido demostrar que el método de síntesis diseñado permite la obtención de materiales basados en Ti con una buena actividad catalítica hacia la ORR, en comparación con otros trabajos reportados en la bibliografía. Además, mediante la combinación ambos metales, se ha podido mejorar el rendimiento catalítico y la estabilidad de los materiales en comparación con los composites monometálicos. En el caso de los criogeles de grafeno dopado con nitrógeno, se ha podido observar una mejora del rendimiento catalítico frente a los grafenos reducidos, sobre todo, mediante el empleo de sistemas electroquímicos avanzados como el GDE. Así mismo, se ha conseguido un aumento significativo de la estabilidad de los materiales, permitiendo su uso a largos tiempos de operación., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Carbon nanofiber-supported tantalum oxides as durable catalyst for the oxygen evolution reaction in alkaline media

  • Ruiz Cornejo, Juan Carlos
  • Vivo Vilches, J. F.
  • Sebastián del Río, David
  • Martínez Huerta, M. Victoria
  • Lázaro Elorri, María Jesús
9 figures, 5 tables.-- Supplementary information available, Active and durable electrocatalysts for the oxygen evolution reaction (OER), capable of replacing noble metal catalysts, are required to develop efficient and competitive devices within the frame of the water electrolysis technology for hydrogen production. In this work, we have investigated tantalum based catalysts supported on carbon nanofibers (CNF) for the first time. The effect of CNF characteristics and the catalyst annealing temperature on the electrochemical response for the OER have been analyzed in alkaline environment using a rotating ring disc electrode (RRDE). The best OER activity and oxygen efficiency were found with a highly graphitic CNF, despite its lower surface area, synthesized at 700 °C, and upon a catalyst annealing temperature of 800 °C. The ordering degree of carbon nanofibers favors the production of oxygen in combination with a low oxygen content in tantalum oxides. The most active catalyst exhibited also an excellent durability., The authors want to thank the Ministerio de Economía, Industria y Competitividad (MICINN) and FEDER for the received funding in the project of reference ENE2017-83976-C2-1-R, and to the Gobierno de Aragón (DGA) for the funding to Grupo de Investigación Conversión de Combustibles (T06_17R). J.C. Ruiz-Cornejo acknowledges DGA for his PhD grant. D. Sebastián acknowledges the MICINN for the Ramón y Cajal research contract (RyC-2016-20944)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Efecto del dopado con nitrógeno de xerogeles de carbono en la actividad de catalizadores Fe-N-C para pilas de combustible

  • Álvarez Manuel, Laura
  • Alegre Gresa, Cinthia
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
1 figura.-- Póster presentado en la Reunión Bienal de la Sociedad Española de Catálisis - SECAT 2021, celebrada en Valencia, del 18 al 20 de octubre 2021., Actualmente, uno de los mayores retos en la tecnología de pilas de combustible de electrolito polimérico (PEFCs) es la disminución del coste de los sistemas catalíticos empleados en el ánodo y en el cátodo. Una de las estrategias más exploradas es la de sustituir los catalizadores basados en Pt por otros basados en metales de transición coordinados con nitrógeno y carbono (Me-N-C, donde Me = Fe, Co y/o Mn), siendo los catalizadores Fe-N-C los más activos para la reacción de reducción de oxígeno (ORR), la reacción limitante en las pilas de combustible. Generalmente, estos catalizadores emplean negros de carbono microporosos como matrices carbonosas. En este trabajo se han sintetizado diferentes catalizadores de hierro usando como estructura carbonosa los xerogeles de carbono, previamente dopados con nitrógeno (N-CXG), con el fin de usar una matriz carbonosa con una mezcla adecuada de microporos y meso/macroporos, necesarios para una correcta difusión de especies en la pila de combustible., Los autores agradecen la financiación del Ministerio de Economía, Industria y Competitividad al proyecto ENE2017-83976-C2-1-R. C. Alegre y D. Sebastián también agradecen al Ministerio de Economía, Industria y Competitividad sus contratos Juan de la Cierva (IJCI-2017-32354) y Ramón y Cajal (RyC-2016-20944), respectivamente y L. Álvarez agradece al Gobierno de Aragón su contrato pre-doctoral DGA. Los autores quieren agradecer también la financiación de la red REPICOMES, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Recent progress on bimetallic NiCo and CoFe based electrocatalysts for alkaline oxygen evolution reaction: A review

  • Gebreslase, Gebrehiwet Abrham
  • Martínez Huerta, M. Victoria
  • Lázaro Elorri, María Jesús
16 figures, 10 tables., The deployment of hydrogen as an energy carrier is found to be a vital alternative fuel for the future. It is expected that water electrolysis, powered by renewable energy sources, be able to scale‐up hydrogen production. However, the reaction kinetic of oxygen evolution reaction (OER) is a sluggish process, which predominantly limits the efficiency of water electrolysis. This review recapitulates the recent progress and efforts made in the design and development of two selected earth-abundant bimetallic electrocatalysts (NiCo and CoFe) for alkaline OER. Each bimetal electrocatalyst is thoroughly outlined and discussed in five sub-sections, including bimetal (oxy) hydroxides, Layered double hydroxides (LDHs) structures, oxides, composites, alloy and nanostructured electrocatalysts, and assembled with heteroatoms. Furthermore, a brief introduction to an in situ/operando characterization techniques and advantages for monitoring the structure of the electrocatalysts is provided. Finally, a summary outlining the challenges and conceivable approaches to advance OER performance is highlighted and discussed., Financial support from the European Union’s Horizon 2020 Research and Innovation programme under the Marie Skłodowska-Curie Actions-Innovative Training Networks (MSCA-ITN) Grant Agreement 813748 (Bike project) are gratefully acknowledged. The authors also wish to acknowledge the Ministerio de Ciencia, Innovación y Universidades (MICINN), and FEDER for the received funding in the project of reference ENE2017-83976-C2-1-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Mesoporous Fe-C-S composites as electroactive materials for the negative electrode of an Iron-Air battery

  • Villanueva, Nicolás
  • Alegre Gresa, Cinthia
  • Lázaro Elorri, María Jesús
1 figure.-- Talk delivered at the CESEP’19 Conference: 8th International Conference on Carbon for Energy Storage and Environment Protection, October 20-24th, Alicante (Spain).-- © Universidad de Alicante., Iron-air batteries (IAB) –which generate electricity from the oxidation of iron in the negative electrode and the reduction of ambient oxygen at the positive electrode– are foreseen as promising devices, due to their low cost and high specific energy, among other characteristics. The negative electrode of these batteries presents some challenges, especially related to the unwanted hydrogen evolution reaction (HER), that can be partially solved by adding sulfurbased additives [1]. Herein, we prepared mesoporous sulfur doped iron oxides and mixed them with a commercial carbon to form Fe/C composites as the electroactive material for the negative electrode of an IAB., The authors acknowledge the MICINN and FEDER for the received funding in the project Ref. ENE2017-83976-C2-1-R, as well as to the Gobierno de Aragón (DGA) for the funding to Grupo de Investigación Conversión de Combustibles (T06_17R) and the PhD scholarship of author N. Villanueva., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Recycling the spent bleaching earth waste material into electrocatalytic component

  • Fernández Inchusta, D.
  • Aghabarari, Behzad
  • Lázaro Elorri, María Jesús
  • Martínez Huerta, M. Victoria
1 figure.-- Talk delivered at the CESEP’19 Conference: 8th International Conference on Carbon for Energy Storage and Environment Protection, October 20-24th, Alicante (Spain).-- © Universidad de Alicante., The design of electrocatalytic materials with high efficiency and without noble metals for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are essential for the development of new emerging electrochemical energy storage and conversion devices [1]. Spent bleaching earth (SBE) is a worthless oil refinery waste material containing a notable percentage of residual oil. New applications are urgent such as converting SBE into catalysts, according to the circular economy concept. In this work SBE has been used as electrocatalytic component for the reversible oxygen electrode. SBE was chemically treated to obtain based-carbon compounds. Then, cobalt, iron and/or tungsten heteropolyacid were added to the carbon-based SBE compounds to obtain different composites. The textural, structural and surface chemistry properties of the composites materials were analysed along with electrochemical characterization in a three electrode cell in alkaline medium. Electrochemical results evidenced Co/SBE catalyst proved to be a valuable bifunctional competitor for ORR and OER showing activity in both reactions (Figure 1) and a better stability than Pt in accelerated tests., By the Spanish Ministry of Science, Innovation and Universities, through project ENE2017- 83976-C2-1-R (co-founded by FEDER), the Spanish National Research Council (CSIC) through project iCOOP20202 and MERC grant project 99392002. D. F.I. also thanks the CSIC for his JAE-Intro grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Titanium dioxide/N-doped graphene composites as non-noble bifunctional oxygen electrocatalysts

  • Luque-Centeno, José Manuel
  • Martínez Huerta, M. Victoria
  • Sebastián del Río, David
  • Pérez Rodríguez, Sara
  • Lázaro Elorri, María Jesús
11 figures.-- Supplementary information available., Bifunctional oxygen electrocatalysts are essential in the development of low-temperature unitized regenerative fuel cells (URFCs), as a promising alternative for storing energy via hydrogen. TiO2, as a semiconductor material, is commonly not established as an active electrocatalyst for oxygen reduction and oxygen evolution due to its poor electrical conductivity and low reactivity. Here, we demonstrated that composites composed of TiO2 and N-doped graphene can be active in oxygen reduction and evolution reactions in an alkaline environment. Combination factors such anatase/rutile interaction, N-doping graphene, and the presence of Ti3+/Ti–N species raise the active sites and improve the electrochemical activity. Our results may afford an opportunity to develop a non-noble and promising electrocatalyst in energy storage technology., This research was funded by the Ministry of Science, Innovation and Universities and FEDER, grant number ENE2017-83976-C2-1-R, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Emerging carbon nanostructures in electrochemical processes

  • Pérez Rodríguez, Sara
  • Alegre Gresa, Cinthia
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
5 figures., Carbonaceous materials have always played an important role in history of electrochemical processes, from the fabrication of solid electrodes to the development of porous matrixes in the conversion and storage of energy and chemicals. This book chapter provides a general overview of emerging carbon nanostructures potentially used in electrochemistry. One-dimensional carbon nanofilaments, such as carbon nanotubes and carbon nanofibers, two-dimensional graphene, and three-dimensional materials, such as carbon gels and ordered mesoporous carbons, are reviewed. The chapter focuses on the physicochemical properties and synthesis methodologies of these carbon nanostructures together with their application to cutting-edge technologies for electrochemical energy conversion and storage, such as fuel cells, electrolyzers, supercapacitors, or batteries. The major challenges and directions for future research are also discussed to guide the design of efficient carbon-based electrodes and catalysts for electrochemical devices., Authors acknowledge financial support given by Spanish Ministry of Science, Innovation and University (MICINN) through project ENE2017-83976-C2-1-R (cofounded by FEDER). C. Alegre and D. Sebastián acknowledge also MICINN for their Juan de la Cierva (IJCI-2017-32354) and Ramón y Cajal (RyC-2016-20944) research contracts, respectively.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Facile synthesis of nitrogen doped carbon decorated NiFe2O4 with enhanced OER performance

  • Gebreslase, Gebrehiwet Abrham
  • Martínez Huerta, M. Victoria
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
1 figure.-- Abstract of the poster presented at the EHEC 2022, European Hydrogen Energy Conference 18-20 May, 2022. Madrid, Spain., High performance, durable and affordable electrocatalyst for Oxygen Evolution Reaction (OER) is of great importance for tenable hydrogen production via water electrolysis. Although spinel oxide-based electrocatalysts (AB2O4, A, B = metal) represent a class of promising candidates for OER, their intrinsically poor electrical conductivity impacts their electrochemical performance. To overcome these bottlenecks, heteroatom-doped carbon structures can be used to improve the conductivity, adjust the electronic structure, durability and also boost the charge transfer, leading to enhanced electrochemical water oxidation [1]. In this work, a selection of nitrogen doped carbon decorated NiFe2O4 composites derived of polydopamine for OER in alkaline medium have been investigated., Financial support from the European Union's Horizon 2020 Research and Innovation programme under the Marie Skłodowska-Curie Actions−Innovative Training Networks (MSCA-ITN) Grant Agreement 813748 are gratefully acknowledged. The authors wish to acknowledge the Ministerio de Ciencia, Innovación y Universidades (MICINN), and FEDER for the received funding in the project of reference ENE2017-83976-C2-1-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Capacitance enhancement of hydrothermally reduced graphene oxide nanofibers

  • Torres Gamarra, Daniel
  • Pérez Rodríguez, Sara
  • Sebastián del Río, David
  • Pinilla Ibarz, José Luis
  • Lázaro Elorri, María Jesús
  • Suelves Laiglesia, Isabel
9 figures, 4 tables., Nanocarbon materials present sp2-carbon domains skilled for electrochemical energy conversion or storage applications. In this work, we investigate graphene oxide nanofibers (GONFs) as a recent interesting carbon material class. This material combines the filamentous morphology of the starting carbon nanofibers (CNFs) and the interlayer spacing of graphene oxide, and exhibits a domain arrangement accessible for fast transport of electrons and ions. Reduced GONFs (RGONFs) present the partial removal of basal functional groups, resulting in higher mesoporosity, turbostratic stacking, and surface chemistry less restrictive for transport phenomena. Besides, the filament morphology minimizes the severe layer restacking shown in the reduction of conventional graphene oxide sheets. The influence of the reduction temperature (140–220 °C) on the electrochemical behaviour in aqueous 0.5 M H2SO4 of RGONFs is reported. RGONFs present an improved capacitance up to 16 times higher than GONFs, ascribed to the unique structure of RGONFs containing accessible turbostratic domains and restored electronic conductivity. Hydrothermal reduction at 140 °C results in the highest capacitance as evidenced by cyclic voltammetry and electrochemical impedance spectroscopy measurements (up to 137 F·g−1). Higher temperatures lead to the removal of sulphur groups and slightly thicker graphite domains, and consequently a decrease of the capacitance., This research was funded by FEDER, the Spanish Ministry of Science, Innovation and Universities MICINN (ENE2017-83976-C2-1-R & ENE2017-83854-R) and by the Aragón Government to the Fuel Conversion Group (T06_17R). DS thanks MICINN for his Ramón y Cajal research contract (RyC-2016-20944)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Carbon nanostructures as electrocatalyst supports for polymer electrolyte fuel cells

  • Sebastián del Río, David
  • Alegre Gresa, Cinthia
  • Pérez Rodríguez, Sara
  • Lázaro Elorri, María Jesús
11 figures.-- Volume 1: Thermodynamics and electrified interfaces., Polymer electrolyte fuel cells (PEFCs) are undoubtedly an important part in the energy scenario of the future hydrogen economy as they efficiently convert chemical energy into electrical energy with almost zero environmental impact during operation. The major barriers to overcome for widespread commercialization of PEFCs are cost and durability issues, with the development of electrocatalysts as an important challenge. Carbon nanostructures are playing a relevant role in the latest advances of electrocatalyst formulations, acting as either catalyst support or catalyst itself when combined with other elements. Graphene, carbon nanofilaments, carbon gels, mesoporous carbons, and other typologies of carbon nanostructures have shown to be determinant in the activity and durability of the electrodes at fuel cells. In this article, the current situation of fuel cells is briefly revised, with emphasis on PEFCs and the role of carbon materials at different levels and components. Then, a practical guide is provided for the evaluation of the main properties of carbon nanostructures with implications on the development of supports and electrocatalysts, describing the most useful techniques to determine porosity, surface area, chemical composition, nanostructure, capacitance, and oxidation rate. The recent investigations are finally reviewed on graphene, carbon nanofilaments, carbon gels, and ordered mesoporous carbon in the field of fuel cells, mainly as carbon supports or catalytic structures for the reduction of oxygen or the oxidation of alcohols., The authors acknowledge the financial support to this work given by the Spanish Ministry of Economy, Industry and Innovation (MICINN) through the project with reference ENE2017-83976-C2-1-R. David Sebastián and Cinthia Alegre also acknowledge MICINN for their research contracts Ramón y Cajal (RyC-2016-20944) and Juan de la Cierva-Incorporación (IJCI-2017-32354), respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of secondary heteroatom (S, P) in N-doped reduced graphene oxide catalysts to oxygen reduction reaction

  • Moosapour Siahkalroudi, Zahra
  • Aghabarari, Behzad
  • Vaezi, Mohammadreza
  • Rodríguez-Castellón, Enrique
  • Martínez Huerta, M. Victoria
Heteroatomic dual-doped metal free graphene materials have revealed significant improvement in the electrocatalysis properties for oxygen reduction reaction (ORR) in alkaline anion exchange membrane fuel cells. Here we report a straightforward and cost-effective strategy to fabricate N, S- and N, P- dual-doped reduced graphene oxide electrocatalysts, characterized by similar N/S and N/P ratios. For this purpose, we used ammonium sulfate ((NH<inf>4</inf>)<inf>2</inf>SO<inf>4</inf>) and ammonium monohydrogenphosphate ((NH<inf>4</inf>)<inf>2</inf>HPO<inf>4</inf>) as heteroatom precursors to obtain the desired catalysts by pyrolysis with graphene oxide. Systematic characterization reveals that the secondary heteroatom S has a greater promotional effect than P in ORR. Furthermore, the gap between the onset potentials of N, S- dual-doped graphene and the standard Pt/C is only 30 mV. The results imply that the combination of the N, S heteroatoms and the surface structure in dual-doped reduced graphene oxide lead to a synergistic effect in catalyzing ORR in alkaline media. © 2020 Elsevier B.V., The authors gratefully acknowledge financial support for this research from the Material and Energy Research Centre (MERC) of Iran (project 781396054) and projects RTI2018-099668-BC22 and ENE2017-83976-C2-1-R of Ministerio de Ciencia, Innovación y Universidades of Spain, and project UMA18-FEDERJA-126 of Junta de Andalucía and FEDER funds., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Optimization of the catalytic layer for alkaline fuel cells based on fumatech membranes and ionomer

  • Sebastián, D.
  • Lemes, G.
  • Luque-Centeno, J.M.
  • Martínez-Huerta, M.V.
  • Pardo, J.I.
  • Lázaro, M.J.
Polymer electrolyte fuel cells with alkaline anion exchange membranes (AAEMs) have gained increasing attention because of the faster reaction kinetics associated with the alkaline environment compared to acidic media. While the development of anion exchange polymer membranes is increasing, the catalytic layer structure and composition of electrodes is of paramount importance to maximize fuel cell performance. In this work, we examine the preparation procedures for electrodes by catalyst-coated substrate to be used with a well-known commercial AAEM, Fumasep® FAA-3, and a commercial ionomer of the same nature (Fumion), both from Fumatech GmbH. The anion exchange procedure, the ionomer concentration in the catalytic layer and also the effect of membrane thickness, are investigated as they are very relevant parameters conditioning the cell behavior. The best power density was achieved upon ion exchange of the ionomer by submerging the electrodes in KCl (isopropyl alcohol/water solution) for at least one hour, two exchange steps, followed by treatment in KOH for 30 min. The optimum ionomer (Fumion) concentration was found to be close to 50 wt%, with a relatively narrow interval of functioning ionomer percentages. These results provide a practical guide for electrode preparation in AAEM-based fuel cell research.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Titanium Dioxide/N-Doped Graphene Composites as Non-Noble Bifunctional Oxygen Electrocatalysts

  • Luque-Centeno, J.M.
  • Martínez-Huerta, M.V.
  • Sebastián, D.
  • Pérez-Rodríguez, S.
  • Lázaro, M.J.
Bifunctional oxygen electrocatalysts are essential in the development of low-temperature unitized regenerative fuel cells (URFCs), as a promising alternative for storing energy via hydrogen. TiO2, as a semiconductor material, is commonly not established as an active electrocatalyst for oxygen reduction and oxygen evolution due to its poor electrical conductivity and low reactivity. Here, we demonstrated that composites composed of TiO2 and N-doped graphene can be active in oxygen reduction and evolution reactions in an alkaline environment. Combination factors such anatase/rutile interaction, N-doping graphene, and the presence of Ti3+/Ti–N species raise the active sites and improve the electrochemical activity. Our results may afford an opportunity to develop a non-noble and promising electrocatalyst in energy storage technology.