Skip to main content

DESARROLLO DE CATALIZADORES BASADOS EN GRAFENOS FUNCIONALIZADOS/DOPADOS Y NANOCOMPOSITES DE GRAFENO PARA CONVERSION ELECTROQUIMICA DE ENERGIA

ENE2014-52158-C2-1-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2014
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Influence of the nature of the carbon support on the activity of Pt/C catalysts for ethanol and carbon monoxide oxidation

  • Rizo, Rubén
  • Sebastián, David
  • Rodríguez, José L.
  • Lázaro, María Jesús
  • Pastor , Elena
  • Rizo, Rubén|||/items/27448570-0e85-47c3-be0f-38bcb1bf11b3
The electrooxidation of ethanol and carbon monoxide on Pt nanoparticles (NPs) supported on carbon nanofibers (CNFs) and carbon blacks (oxidized and non-oxidized) is studied. Quite similar characteristics are found for Pt NPs, including particle size and crystal phases, regardless of the nature of carbon support. Cyclic voltammetries and current-transient curves show higher ethanol oxidation current density for Pt/CNF than for Pt/Vulcan. In situ spectroelectrochemical techniques including Fourier transform infrared spectroscopy (FTIR) and differential electrochemical mass spectrometry (DEMS), are employed in order to identify adsorbed reaction intermediates and products. Pt/CNF results in a lower CO poisoning of the NP surface compared to Pt/Vulcan, allowing higher amount of free Pt active sites for the oxidation of ethanol which leads to the formation of acetic acid during the reaction.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of the dendrimer generation used in the synthesis of Pt-Ru nanoparticles supported on carbon nanofibers on the catalytic activity towards methanol oxidation

  • Calderón Gómez, Juan Carlos
  • Calvillo Lamana, Laura
  • Lázaro Elorri, María Jesús
  • Rodríguez, José Luis
  • Pastor Tejera, Elena
Pt-Ru nanoparticles supported on carbon nanofibers (CNF) were synthesized by the sodium borohydride reduction method, using different generation dendrimers (zero, one, two and three generations). After the synthesis process, these materials were submitted to a heat treatment at 350 °C, in order to clean the nanoparticle surface of organic residues. TEM characterization showed that the Pt-Ru nanoparticles size ranged between 1.9 and 5.5 nm. The use of dendrimers did not totally avoid the formation of aggregates, although monodisperse sizes were observed. The heat treatment produces the desired surface cleaning, although promoted the formation of agglomerates and crystalline Ru oxides. The study of the electrochemical activity towards the methanol oxidation displayed some clues about the influence of both the dendrimer generation and the presence of Ru oxides. Moreover, the apparent activation energy <i>E<sub>ap</sub></i> for this reaction was determined. The results showed a beneficial effect of the heat treatment on the methanol oxidation current densities for the materials synthesized with the biggest dendrimers, being the methanol deprotonation and CO<sub>ad</sub> diffusion the predominant rate determining steps (<i>rds</i>)., We acknowledge support from the Unit of Information Resources for Research at the "Consejo Superior de Investigadciones Científicas" CSIC for the article-processing charges contribution., : This work was carried out with the support of Ministry of Economy and Competitiveness (MINECO) through the project ENE2014-52158-C2-2-R and 1-R (co-funded by FEDER). J.C.C. is indebted to the Alβan Program for the predoctoral fellowship No. E07D403742CO.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nitrogen doped ordered mesoporous carbon as support of PtRu nanoparticles for methanol electro-oxidation

  • Sebastián del Río, David
  • Nieto-Monge, María Jesús
  • Pérez Rodríguez, Sara
  • Pastor Tejera, Elena
  • Lázaro Elorri, María Jesús
The low oxidation kinetics of alcohols and the need for expensive platinum group metals are still some of the main drawbacks for the commercialization of energy efficient direct alcohol fuel cells. In this work, we investigate the influence of nitrogen doping of ordered mesoporous carbon (CMK) as support on the electrochemical activity of PtRu nanoparticles. Nitrogen doping procedures involve the utilization of pyrrole as both nitrogen and carbon precursor by means of a templating method using mesoporous silica. This method allows obtaining carbon supports with up to 14 wt. % nitrogen, with an effective introduction of pyridinic, pyrrolic and quaternary nitrogen. PtRu nanoparticles were deposited by sodium formate reduction method. The presence of nitrogen mainly influences the Pt:Ru atomic ratio at the near surface, passing from 50:50 on the bare (un-doped) CMK to 70:30 for the N-doped CMK catalyst. The electroactivity towards the methanol oxidation reaction (MOR) was evaluated in acid and alkaline electrolytes. The presence of nitrogen in the support favors a faster oxidation of methanol due to the enrichment of Pt at the near surface together with an increase of the intrinsic activity of PtRu nanoparticles., The work has received financial support from the Spanish Ministry of Economy and Competitiveness (MINECO) through projects ENE2014-52158-C2-1-R and 2-R (co-founded by FEDER) and from Aragon Government to the Fuel Conversion Group. M.J. Nieto-Monge has also received funding for her Ph.D. grant from MINECO. D. Sebastián acknowledges also MINECO for his Ramón y Cajal research contract (RYC-2016-20944).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

N-doped carbon xerogels as Pt support for the electro-reduction of oxygen

  • Alegre Gresa, Cinthia
  • Sebastián del Río, David
  • Gálvez Parruca, María Elena
  • Baquedano, Estela
  • Moliner Álvarez, Rafael
  • Aricò, Antonino Salvatore
  • Baglio, Vincenzo
  • Lázaro Elorri, María Jesús
Durability and limited catalytic activity are key impediments to the commercialization of polymer electrolyte fuel cells. Carbon materials employed as catalyst support can be doped with different heteroatoms, like nitrogen, to improve both catalytic activity and durability. Carbon xerogels are nanoporous carbons that can be easily synthesized in order to obtain N-doped materials. In the present work, we introduced melamine as a carbon xerogel precursor together with resorcinol for an effective in-situ N doping (3–4 wt % N). Pt nanoparticles were supported on nitrogen-doped carbon xerogels and their activity for the oxygen reduction reaction (ORR) was evaluated in acid media along with their stability. Results provide new evidences of the type of N groups aiding the activity of Pt for the ORR and of a remarkable stability for N-doped carbon-supported Pt catalysts, providing appropriate physico-chemical features., ICB-CSIC authors acknowledge the financial support given by the Spanish Ministry of Economy and Competitiveness (MINECO) through the project ENE2014-52158-C2-1-R (co-founded by FEDER). CNR-ITAE authors acknowledge the financial support through the PRIN 2010-11 project “Advanced nanocomposite membranes and innovative electrocatalysts for durable polymer electrolyte membrane fuel cells (NAMED-PEM)”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of molybdophosphoric acid in iron and cobalt graphene/chitosan composites for oxygen reduction reaction

  • Aghabarari, Behzad
  • Nezafati, N.
  • Roca-Ayats, M.
  • Capel Sánchez, María del Carmen
  • Lázaro Elorri, María Jesús
  • Martínez Huerta, M. Victoria
Iron and cobalt materials have attracted enormous interest as low-cost alternatives to noble-metal catalysts able to catalyse oxygen reduction reaction. Here, the effect of the heteropolyacid H3PMo12O40 (HPMo) into the structure of new composites formed by Fe, Co and reduced-graphene oxide/chitosan (rGOCS) has been investigated. Chitosan was used as a nitrogen precursor for nanocarbon, while reduced graphene oxide was introduced to tune the electrical conductivity. The physicochemical properties of electrocatalysts were performed by Raman, XRD, XPS and TEM. Activity toward ORR was carried out in a three-electrode electrochemical cell using a rotating disk electrode (RDE). The molybdophosphoric acid incorporation into the structure of Fe/rGOCS composites resulted in an increase of the activity of the oxygen reduction reaction in alkaline medium. Furthermore, the replacement of iron by cobalt yielded in a great improvement of the activity and stability, which may open new avenues for the design of nanomaterials utilizing HPMo/reduced-graphene oxide/chitosan composites., This work was supported by the Spanish Government under the MINECO projectENE2014-52158-C2-1R (co-funded by FEDER), Spanish National Research CouncilCOOPB20202 and MERC project721394002. M.R.A acknowledges the FPU-2012 program for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Bifunctional N‐doped graphene Ti and Co nanocomposites for the oxygen reduction and evolution reactions

  • Luque-Centeno, José Manuel
  • Martínez Huerta, M. Victoria
  • Sebastián del Río, David
  • Lemes Pacheco, Giovanni
  • Pastor Tejera, Elena
  • Lázaro Elorri, María Jesús
Developing efficient, durable, and low cost catalysts based on earth-abundant elements for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is essential for renewable energy conversion and energy storage devices. We report herein a simple one-pot procedure for the synthesis of non-precious metals N-doped graphene composites employing urea as nitrogen source, and their application as bifunctional catalysts for both the ORR and OER in alkaline environment. In this study, the effects of the addition of Ti and Co on the structure and performance of the N-doped graphene composites are investigated. The incorporation of Ti leads to a composite with both anatase and rutile TiO2 crystalline phases as well as Ti3+ species stabilized upon hybridization with N-doped reduced graphene oxide. The ORR onset potential for the Ti-based composite is 0.85 V (vs. RHE) and the number of electrons transferred is 3.5, showing superior stability than Pt/C after accelerated potential cycling in alkaline solution. However, this composite shows low activity and stability for the OER. On the other hand, the composite consisting of metallic Co and Co3O4 nanocrystals grown on N-doped reduced graphene oxide exhibits the best performance as bifunctional catalyst, with ORR and OER onset potentials of 0.95 V and 1.51 V (vs. RHE), respectively, and a number of electrons transferred of 3.6 (ORR). The results reveal the presence of important structural features such as metallic Co as the predominant crystalline component, amorphous Co3O4 phase and the coordination of Co-N-doped graphene. All of them seem to be fundamental for the high activity and stability towards ORR and OER., Authors acknowledge financial support given by Spanish Ministry of Economy and Competitiveness (MINECO) through projects ENE2014-52158-C2-1-R and 2-R (co-founded by FEDER). J. M. Luque and G. Lemes also thank MINECO and Aragon Government, respectively, for their Ph.D. grants., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electrocatalysts for low temperature fuel cells

  • Martínez Huerta, M. Victoria
  • Lázaro Elorri, María Jesús
Low temperature fuel cells technologies are currently shifting very fast from fundamental research to real growth. The development of electrocatalysts plays a vital role in the electrocatalytic reactions involved in these devices, because the catalyst determines the overall reaction efficiency, durability and cost. This article review progress in the research and development of electrocatalysts for low temperature fuel cells technologies, with especial attention in the contribution of our research teams over the last 15 years or so. The intensive research efforts in reducing or replacing Pt-based electrodes in fuel cells have been focus in the use of carbon nanomaterials as electrocatalytic supports, including carbon nanostructures tailored by surface modification or building in particular dopants/defects. Recent research effort has also led to the use of electronic conductivity noncarbon support materials. In addition, carbon-composite materials are proving to be a robust, inexpensive and active electrocatalysts, where the synergetic effect between the carbon nanomaterials and the ceramic or polymer nanostructures can lead to a superior electrocatalytic performance and durability for low temperature fuel cells. Perspectives on these catalysts and possible pathways to address current remaining challenges are also discussed., Authors thank the Ministry of Economy and Competitiveness (MINECO) and FEDER through the Project ENE2014-52158-C2-1-R for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

DEMS strategy for the determination of the difference in surface acidity of carbon materials

  • Pérez Rodríguez, Sara
  • García, Gonzalo
  • Lázaro Elorri, María Jesús
  • Pastor Tejera, Elena
2 Figuras. 1 Tabla., Differential electrochemical mass spectrometry (DEMS) was used to establish the difference in surface acidity in sulfuric acid solution between commercially available carbon black (Vulcan) and Vulcan which had been chemically modified with concentrated nitric acid (VulcanO). The mass signal for the m/z = 2 associated with H2 formation was observed to be influenced by functional groups at the carbon surfaces. Analysis of the mass spectra with the help of the Nernst equation allowed us to quantitatively find the difference in surface pH between the two carbon-based materials in acid media. The elevated concentration of functional groups at the VulcanO surface results in a decrease in the local acidity of the surface under these conditions (0.5 M H2SO4), and consequently the hydrogen evolution reaction (HER) is delayed., The authors gratefully acknowledge financial support given by Spanish MINECO (ENE2014-52158-C2-2-R and 1-R). GG acknowledges the Viera y Clavijo program (ACIISI & ULL) for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electrochemical behavior of the carbon black Vulcan XC-72R: influence of the surface chemistry

  • Pérez Rodríguez, Sara
  • Pastor Tejera, Elena
  • Lázaro Elorri, María Jesús
The effect of chemical surface oxidation of the carbon black Vulcan XC-72R on the capacitance, tolerance to corrosion and electrochemical activity toward the hydrogen evolution reaction (HER) has been studied in 0.1 M NaHCO3. Acid treatments with HNO3 or a HNO3H2SO4 mixture resulted in a progressive introduction of oxygen-containing groups which led to a strong increase of the capacitance and a higher tendency to carbon corrosion. In contrast, an inhibition of the hydrogen evolution current (at potentials more negative than −1.0 V) was observed for oxidized samples in comparison to the un-treated material. HER was also tested in the presence of dissolved CO2 to study the influence of the surface chemistry on the CO2 electroreduction. An inhibition of the H2 evolution current was evidenced in the CO2 saturated electrolyte due to the adsorption of species from CO2 reduction. A strong hydrogen current decrease (65–78%), and thus a higher tendency to adsorb (CO2)red species, was obtained on the original Vulcan and the HNO3-treated samples, in comparison to the carbon oxidized with HNO3H2SO4 (15%), which could be related to the highest content of basic groups of the last carbon., The authors gratefully acknowledge financial support given by Spanish MINECO (ENE2014-52158-C2-1-R and 2-R). S. Pérez-Rodríguez thanks Gobierno de Aragón for the DGA grant. Furthermore, the authors wish to acknowledge Dra. Ana Beatriz García for the TPD measurements., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of oxygen and structural properties on the electrical conductivity of powders of nanostructured carbon materials

  • Pérez Rodríguez, Sara
  • Torres Gamarra, Daniel
  • Lázaro Elorri, María Jesús
6 Figuras. 4 Tablas.-- Datos suplementarios sobre el artículo disponibles en la versión en línea del editor.-- © 2018. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, This work reports a study of the electrical conductivity under compression of nanostructured carbon powders with different physicochemical properties (texture, chemical-surface and morphology): a commercial carbon black (Vulcan XC-72R) and synthesized ordered mesoporous carbon (OMC), carbon nanocoils (CNC) and carbon nanofibers (CNF). The electrical conductivity was determined from the sample resistance under compaction (from 0.5 to 140 MPa) using the four-probe technique. A comparison of intrinsic and grain electrical conductivities (calculated according to the percolation theory and the general effective media approximation) was performed. Additionally, samples were subjected to chemical oxidation or graphitization treatments to evaluate the effect of oxygen content and structural properties on the electrical conductivity. In spite of the physicochemical differences of carbon materials, an exponential decrease of the electrical conductivity with the oxygen amount was stated. Finally, thermal treatment of OMC at 1500 °C led to a surprising increase in its conductivity due to the graphitization of the amorphous carbon structure of the original material and the oxygen removal., The authors gratefully acknowledge financial support given by Spanish MINECO (ENE2014-52158-C2-1-R). Furthermore, the authors wish to thank Dra. Ana Beatriz García (INCAR-CSIC) for the graphitization treatment of OMC and the TPD measurements., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Carbon supported PdM (M = Fe, Co) electrocatalysts for formic acid oxidation. Influence of the Fe and Co precursors

  • Juárez Marmolejo, Leticia
  • Pérez Rodríguez, Sara
  • Montes de Oca Yemha, María G.
  • Palomar Pardavé, Manuel
  • Romero Romo, Mario A.
  • Ezeta Mejía, Araceli
  • Morales Gil, Perla
  • Martínez Huerta, M. Victoria
  • Lázaro Elorri, María Jesús
8 Figuras.- 4 Tablas, Pd and PdM (M = Fe or Co) nanostructured electrocatalysts were synthesized by the impregnation method and supported on carbon black Vulcan XC-72R for the formic acid oxidation reaction, FAOR, in acid medium. Nitrates or chlorides were used as Fe and Co precursors to study the counter ion role on the physicochemical features and electrochemical performance of the electrocatalysts. TEM analysis showed that PdM was deposited on the carbon material with a particle size around 2–3 nm. From XRD, peaks associated with the fcc palladium planes were observed along with evidence of PdM alloy formation, particularly when the nitrate salts were used as metal precursors. Furthermore, XPS analyses indicated that nitrates promote the metal oxide formation to a greater extent than chlorides, mainly for Pd. PdCo electrocatalyst obtained from nitrates exhibited the highest performance for FAOR with a steady state current density of 451 and 313 μA cm−2 at 200 and 400 mV respectively, which is in both cases, 3 times larger than that developed for a commercial Pd/C catalyst., LJM is grateful to CONACYT for the grant awarded for this research, as well as to the UAM-A and the ICB for the support provided. MGMY, MRR, MPP and AEM thank the SNI for the distinction of their membership and the stipend provided. MGMY is indebted to L'oreál-UNESCO-CONACyT-AMC for the grant Women in Science 2016. MJL and SPR gratefully acknowledge financial support given by Spanish MINECO (ENE2014-52158-C2-1-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Crystal growth, structural phase transitions, and optical gap evolution of CH3NH3Pb(Br1–xClx)3 perovskites

  • Álvarez Galván, María Consuelo
  • Alonso, J. A.
  • López, Carlos A.
  • López-Linares, E.
  • Contreras, Carlos
  • Lázaro Elorri, María Jesús
  • Fauth, François
  • Martínez Huerta, M. Victoria
11 Figuras.- 2 Tablas.- Material suplementario disponible en línea en la página web del editor.-- Título del postprint: Crystal growth, structural phase transitions and optical gap evolution of CH3NH3Pb(Br1-xClx)3 powders, Chemically tuned inorganic–organic hybrid halide perovskites based on bromide and chloride anions CH3NH3Pb(Br1–xClx)3 have been crystallized and investigated by synchrotron X-ray diffraction (SXRD), scanning electron microscopy, and UV–vis spectroscopy. CH3NH3PbBr3 and CH3NH3PbCl3 experience successive phase transitions upon cooling, which are suppressed for intermediate compositions probably due to compositional disorder. For CH3NH3PbCl3, a transient phase, formerly described as tetragonal, was identified at 167.5 K; the analysis of SXRD data demonstrated that it is indeed orthorhombic, with space group Pnma, and a ≈ √2ap; b ≈ 2ap; c ≈ √2ap (ap is the ideal cubic perovskite unit-cell parameter). The band gap engineering brought about by the chemical management of CH3NH3Pb(Br1–xClx)3 perovskites can be controllably tuned: the gap progressively increases with the concentration of Cl ions from 2.2 to 2.9 eV, and shows a concomitant variation with the unit-cell parameters of the cubic phases at 295 K. This study provides an improved understanding of the structural and optical properties of the mixed CH3NH3Pb(Br1–xClx)3 perovskites., Authors acknowledge financial support given by KIC RAW MATERIALS from European Union (OPTNEWOPT project) and the Spanish Ministry of Economy and Competitiveness (ENE2014-52158-C2-1-R project and MAT2017-84496-R) cofounded by FEDER. C.A.L. acknowledges ANPCyT and UNSL for financial support (Projects PICT2014-3576 and PROICO 2-2016), Argentine. C.A.L. is a member of CONICET., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

N-doped graphene catalysts with high nitrogen concentration for the oxygen reduction reaction

  • Lemes Pacheco, Giovanni
  • Sebastián del Río, David
  • Pastor Tejera, Elena
  • Lázaro Elorri, María Jesús
9 Figures, 3 Tables.-- Informacion suplementaria disponible en línea en la página web del editor.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Nitrogen doped reduced graphene oxide (NrGO) catalysts and composites of these with carbon nitride (CN) with nitrogen content as high as 19.8 wt% and 35.8 wt%, respectively, have been synthesized by thermal annealing of multilayer graphene oxide and urea at different temperatures. Nitrogen has been effectively introduced as a mix of pyridinic, pyrrolic, pyridonic and quaternary bonding configurations into the carbon lattice of graphene upon removal of CN phase over 650 °C. The electrocatalytic activity towards oxygen reduction reaction (ORR) in 0.1 M NaOH has been investigated. NrGO catalysts with less nitrogen content show better performance than composites. NrGO produced at 800 °C presents the best activity with half-wave potential of 0.76 V vs. RHE and a mean number of electrons of 3.7, which are close to a commercial Pt/C catalyst. This study concludes that a high concentration of nitrogen atoms in multilayer reduced graphene oxide does not necessarily produce a highly active electrocatalyst, suggesting that carbon in the neighbourhood of nitrogen atoms are the active sites for ORR in alkaline medium., Authors acknowledge the financial support given by the Spanish Ministry of Science, Innovation and Universities (MICINN) through projects ENE2014-52158-C2-1-R and 2-R and ENE2017-83976-C2-1-R and 2-R (co-founded by FEDER) and Aragón Government to support “Grupo de Conversion de Combustibles” (T06_17R). G. Lemes and D. Sebastián thank the Aragón Government and MICINN for their Ph.D. grant and Ramón y Cajal research contract (RyC-2016-20944), respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Influence of thermal treatments on the stability of Pd nanoparticles supported on graphitised ordered mesoporous carbons

  • Celorrio, Verónica
  • Sebastián del Río, David
  • Calvillo Lamana, Laura
  • García Suárez, Ana Beatriz
  • Fermin, David J.
  • Lázaro Elorri, María Jesús
6 Figures, 4 Tables.-- Work presented at the 5th Iberian Symposium on Hydrogen, Fuel Cells and Advanced Batteries (HYCELTEC 2015), 5-8 July 2015, Tenerife, Spain, The graphitisation of ordered mesoporous carbons (CMK-3) was carried out by thermal treatments under different conditions of temperature and heating rate. The electrochemical characterization in acidic medium of the graphitised CMK-3 showed that such a thermal treatment is effective to decrease the carbon oxidation rate (corrosion) while preserving a good porosity in terms of capacitance. Besides, the graphitisation degree and, in consequence the electrochemical corrosion resistance, can be modulated by an appropriate choice of thermal treatment conditions, where the heating rate and temperature appear as critical parameters. Under certain graphitisation conditions, the carbon corrosion of CMK-3 can be minimized showing lower rates compared to a commercial carbon black (Vulcan XC-72R). Palladium nanoparticles were supported on the most promising graphitised CMK-3 and Vulcan using a method based on impregnation and reduction with borohydride, resulting in suitable metal crystallite sizes. The electrocatalytic activity towards the oxidation of carbon monoxide and formic acid were assessed in aqueous sulphuric acid electrolyte for application at the anode of direct formic acid fuel cells (DFAFCs). The best activity results were obtained for the Pd catalyst supported on a graphitised CMK-3., The authors want to thank the Spanish Ministry of Economy and Competitiveness and FEDER for financial support under the project ENE2014-52158-C2-1-R. V. Celorrio also acknowledges the Royal Society and the UK National Academy by the support through the Newton International Fellows program.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Tesis doctoral (DoctoralThesis)

Electrocatalizadores bifuncionales basados en grafeno dopado con N y modificados con Ti y Co para pilas de combustible regenerativas en una unidad

  • Luque-Centeno, José Manuel
Tesis doctoral presentada para la obtención del grado de Doctor en Electroquímica, Ciencia y Tecnología por la Universidad de Córdoba, el 13 de mayo 2021.-- Sobresaliente "cum laude"., [EN] The increasing demand of energy that humanity had suffer in the last times, added to the global warming expanse associated to the fossil fuels used as main energy source, have made that the humanity has to afford one of its highest challenges: the search for new sources of sustainable energy. Currently, the use of electrochemical energy conversion systems like fuel cells (FC) and electrolysers (PEM) have been raised as good candidate to solve this problem. These kinds of devices are so important than some government agencies like European Union have proposed some strategies in order to develop the use of green H2 as alternative for the generation of electrical energy. In Spain, according with de UE guidelines, some strategies like the pickups on “Hoja de Ruta del Hidrógeno: una apuesta por el hidrógeno renovable ” or “Estrategia de almacenamiento energético ” remarks the importance of contribute to the improvement of these technologies in order to reach a more sustainable future. Development of these technologies have its main limitation in the oxygen electrode reaction, which are the oxygen reduction (ORR) and evolution (OER) reactions, whose high equilibrium potential (1.23 V vs RHE) make necessary the use of catalysts based on noble metals which increase significantly the cost of manufacture. To solve this, in the last decade the efforts have been focused in the use of carbon-based materials as catalysts combined with early transition metals, creating a new range of materials named composites, whose high conductivity, availability and stability make them good candidates to substitute actual noble metal-based catalysts as Pt or Ir. For this reason, the aim of this doctoral thesis is the design and optimization of a synthesis method which allow the obtention of composites prepared by combining nitrogen doped graphene with Ti and Co nanoparticles. This work has been focused in the optimization of some parameters as the precursor mixture preparation, in order to obtain different n-doped graphene structures, and the pyrolysis temperature and time for the thermal reduction step. In the first part of this study, a new synthesis method has been employed to prepare nitrogen doped graphene modified with Ti or Co nanoparticles. Prepared materials have been characterized by different techniques in order to determine the physicochemical and catalytic properties of monometallic composites. In addition, the influence of the pyrolysis time has been studied for 1, 2 and 3 hours in the Ti-based materials, finding some differences in the nature of the Ti found phases. A Co-based monometallic composite has been prepared and their properties have been compared with the monometallic Ti-based composites. The core part of this doctoral thesis has been focused on the study of the combined effect of Ti and Co in the same composite. To do this, synthesis method has been modified in order to introduce Ti and Co at the same time. In addition, to optimize the synthesis method, some parameters like pyrolysis temperature (700 – 800 ºC) and time (1 – 2 – 3h) have been compared. The evolution of the founded phases in each material has been studied through physicochemical techniques which have revealed the presence of different metal oxides according to the pyrolysis temperature employed for the thermal reduction procedure. However, the time pyrolysis influence has been determined. From these results, the best synthesis condition to obtain the best electrocatalytic performance have been selected as base for the preparation of a new synthesis method for the obtention of three-dimensional graphene structures, called graphene cryogels, with the aim of increase the specific BET area of catalysts. In addition, from this synthesis, the effect of Co precursor has been studied too. By these studies have been confirmed an increase of BET area in all synthetized cryogels. However, the physicochemical properties study has shown significant differences according to the employed Co precursor. Catalytic performance of synthetized materials, stability and bifunctionality towards OER and ORR have been measured by a three-electrode system in order to determine which catalysts have the best performance. Those which have shown the best bifunctional behaviour have been tested by advanced electrochemical techniques like gas diffusion electrode (GDE) and a prototype URFC system. The comparison between reduced graphene-based materials has been demonstrated that the designed synthesis method allows the obtention of Ti-based composites with good performance as catalysts for the ORR, compared with similar materials reported on literature. In addition, by combining both metals, some properties like catalytic performance of stability have been upgraded. Composites based on cryogels have shown a better performance in advanced electrochemical techniques like GDE, having a better behaviour as bifunctional catalysts and being more stable than reduced graphene-based catalysts., [ES] El aumento de la demanda energética que ha experimentado la humanidad en los últimos años, sumado al incesante avance del calentamiento global asociado al uso de combustibles fósiles como principal fuente de energía, han hecho que en la actualidad la humanidad se enfrente a uno de los mayores retos de su historia: la búsqueda de nuevas fuentes de energía más sostenibles. En la actualidad, el uso de sistemas de conversión electroquímica de energía, como electrolizadores y pilas de combustible, se postula como un buen candidato para solventar este problema. Tal es la importancia de estos dispositivos que ya se han planteado numerosas estrategias por los gobiernos de la Unión Europea para favorecer la transición energética hacia el H2 verde. En el caso de España, estrategias como las recogidas en “Hoja de Ruta del Hidrógeno: una apuesta por el hidrógeno renovable ” o la “Estrategia de almacenamiento energético ” recalcan la importancia de contribuir en el desarrollo de estas tecnologías para alcanzar un futuro más sostenible. El desarrollo de estas tecnologías tiene su principal limitación en las reacciones que implican al O2, como son la evolución (OER) y reducción de oxígeno (ORR), las cuales, debido a su alto potencial de equilibrio (1,23 V frente al electrodo reversible de hidrógeno), hacen que sea necesario el empleo de catalizadores basados en metales nobles que encarecen significativamente el coste de estos dispositivos. Para tratar de solucionar esto, en la última década se han centrado los esfuerzos en el uso de materiales carbonosos como catalizadores, en combinación con metales de la primera serie de transición, dando lugar a una nueva gama de materiales denominados composites o materiales compuestos, cuya alta conductividad, abundancia y estabilidad los han convertido en buenos candidatos para sustituir a los catalizadores basados en metales nobles como Pt o Ir que se emplean en la actualidad. Es por esto que el objetivo de esta tesis doctoral es el diseño y optimización de un método de síntesis que permita la obtención de materiales compuestos preparados mediante la combinación de grafenos dopados con nitrógeno y nanopartículas de óxidos de Ti y Co. El trabajo se ha centrado en la optimización de variables como la preparación del material precursor con el fin de obtener diferentes estructuras de grafeno dopado nitrógeno, así como, la temperatura y el tiempo de pirólisis durante el proceso de reducción térmica. En la primera parte de este estudio se ha llevado a cabo el diseño de un método de síntesis para la obtención de grafenos reducidos dopados con nitrógeno y modificado con nanopartículas de Ti o Co, con el fin de determinar tanto las propiedades físico-químicas, como catalíticas, de los composites monometálicos. En este estudio, además, se ha estudiado la influencia del tiempo (1 – 2 – 3 horas) en el método de síntesis empleado para la preparación de composites modificados con Ti, observándose algunas diferencias en la naturaleza de las fases de Ti encontradas. A continuación, se ha preparado un catalizador modificado con Co y sus propiedades han sido comparadas con el mejor de los catalizadores modificados con Ti. La parte central de la tesis doctoral se ha centrado en el estudio del efecto combinado de ambos metales en un mismo composite. Para ello, se ha modificado el método de síntesis para modificar el grafeno dopado con nitrógeno con Ti y Co en una sola etapa. Para optimizar el método de síntesis se han comparado distintos materiales preparados a dos temperaturas de reacción (700 – 800 ºC) y distintos tiempos de reacción (1 – 2 – 3 horas). La evolución de las fases encontradas en cada material ha sido estudiada a partir de técnicas físico-químicas, a través de las cuales se ha podido determinar la aparición de distintos óxidos metálicos en función de la temperatura de pirólisis empleada para la reducción de los materiales. Así mismo, al igual que ocurría en los materiales monometálicos, se ha podido determinar la evolución de las fases metálicas, así como la naturaleza de la fase grafénica en función del tiempo de pirólisis empleado. A partir de los estudios anteriores, se han tomado las condiciones en las que han obtenido los catalizadores con el mejor rendimiento electrocatalítico como base para la preparación de un nuevo método de síntesis que permita la obtención de estructuras tridimensionales de grafeno, denominadas criogeles de grafeno, con el objetivo de aumentar el área BET de los catalizadores. Además, a partir de esta síntesis se ha estudiado el efecto de la sal del Co utilizada como precursor en las propiedades de los catalizadores obtenidos. Los estudios llevados a cabo a partir de la determinación de las isotermas de absorción de los materiales, ha permitido confirmar un aumento significativo del área BET en todos los criogeles sintetizados. Así mismo, el estudio de las propiedades físico-químicas de los materiales ha revelado diferencias significativas en los materiales en función del precursor de Co empleado. El comportamiento electrocatalítico de los materiales, así como, su estabilidad y su bifuncionalidad para la OER y la ORR ha sido caracterizado mediante un sistema electroquímico de tres electrodos para determinar aquella combinación de materiales con mayor actividad electrocatalítica. Aquellos que han presentado el mejor comportamiento bifuncional han sido además caracterizados por técnicas electroquímicas avanzadas como el electrodo de difusión de gases (GDE) y un sistema prototipo de pila de combustible regenerativa. Comparando el comportamiento de los materiales basados en grafenos reducidos dopado con nitrógeno, se ha podido demostrar que el método de síntesis diseñado permite la obtención de materiales basados en Ti con una buena actividad catalítica hacia la ORR, en comparación con otros trabajos reportados en la bibliografía. Además, mediante la combinación ambos metales, se ha podido mejorar el rendimiento catalítico y la estabilidad de los materiales en comparación con los composites monometálicos. En el caso de los criogeles de grafeno dopado con nitrógeno, se ha podido observar una mejora del rendimiento catalítico frente a los grafenos reducidos, sobre todo, mediante el empleo de sistemas electroquímicos avanzados como el GDE. Así mismo, se ha conseguido un aumento significativo de la estabilidad de los materiales, permitiendo su uso a largos tiempos de operación., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Nitrogen doped ordered mesoporous carbon as support of ptru nanoparticles for methanol electro-oxidation

  • Sebastián, David
  • Nieto-Monge, María Jesús
  • Pérez-Rodríguez, Sara
  • Pastor, Elena
  • Lázaro, Mª Jesús
The low oxidation kinetics of alcohols and the need for expensive platinum group metals are still some of the main drawbacks for the commercialization of energy efficient direct alcohol fuel cells. In this work, we investigate the influence of nitrogen doping of ordered mesoporous carbon (CMK) as support on the electrochemical activity of PtRu nanoparticles. Nitrogen doping procedures involve the utilization of pyrrole as both nitrogen and carbon precursor by means of a templating method using mesoporous silica. This method allows obtaining carbon supports with up to 14 wt. % nitrogen, with an effective introduction of pyridinic, pyrrolic and quaternary nitrogen. PtRu nanoparticles were deposited by sodium formate reduction method. The presence of nitrogen mainly influences the Pt:Ru atomic ratio at the near surface, passing from 50:50 on the bare (un-doped) CMK to 70:30 for the N-doped CMK catalyst. The electroactivity towards the methanol oxidation reaction (MOR) was evaluated in acid and alkaline electrolytes. The presence of nitrogen in the support favors a faster oxidation of methanol due to the enrichment of Pt at the near surface together with an increase of the intrinsic activity of PtRu nanoparticles.
Docta Complutense
Publication Artículo científico (JournalArticle)

Enhanced stability in CH_3NH_3PbI_3 hybrid perovskite from mechano-chemical synthesis: structural, microstructural and optoelectronic characterization

  • López, Carlos A.
  • Abia, Carmen
  • Rodrigues, Joao E.
  • Serrano Sánchez, Federico
  • Nemes, Norbert Marcel
  • Martínez, José L.
  • Fernández Díaz, Maria T.
  • Biskup Zaja, Nevenko
  • Álvarez Galván, Consuelo
  • Carrascoso, Felix
  • Castellanos Gómez, Andres
  • Alonso, Jose A.
Among the hybrid organic-inorganic perovskites MAPbX(3) (MA: methyl-ammonium CH3-NH3+, X=halogen), the triiodide specimen (MAPbI(3)) is still the material of choice for solar energy applications. Although it is able to absorb light above its 1.6 eV bandgap, its poor stability in humid air atmosphere has been a major drawback for its use in solar cells. However, we discovered that this perovskite can be prepared by ball milling in a straightforward way, yielding specimens with a superior stability. This fact allowed us to take atomic-resolution STEM images for the first time, with sufficient quality to unveil microscopic aspects of this material. We demonstrated full Iodine content, which might be related to the enhanced stability, in a more compact PbI6 framework with reduced unit-cell volume. A structural investigation from neutron powder diffraction (NPD) data of an undeuterated specimen was essential to determine the configuration of the organic MA unit in the 100-298 K temperature range. A phase transition is identified, from the tetragonal structure observed at RT (space group I4/mcm) to an orthorhombic (space group Pnma) phase where the methyl-ammonium organic units are fully localized. Our NPD data reveal that the MA changes are gradual and start before reaching the phase transition. Optoelectronic measurements yield a photocurrent peak at an illumination wavelength of 820 nm, which is redshifted by 30 nm with respect to previously reported measurements on MAPbI(3) perovskites synthesized by crystallization from organic solvents.