Skip to main content

DESARROLLO DE PROCESOS CATALITICOS EN BIOREFINERIA BASADOS EN NANOMATERIALES DE CARBONO DE ORIGEN RENOVABLE PARA LA OBTENCION DE BIOCOMBUSTIBLES

ENE2017-83854-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 41
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Liquid-phase hydrodeoxygenation of guaiacol over Mo2C supported on commercial CNF. Effects of operating conditions on conversion and product selectivity

  • Moreira, Rui
  • Ochoa, Elba
  • Pinilla Ibarz, José Luis
  • Portugal, António
  • Suelves Laiglesia, Isabel
2 Tablas,7 Figuras, 14 Páginas., In this work, a Mo2C catalyst that was supported on commercial carbon nanofibers (CNF) was synthetized and tested in the hydrodeoxygenation (HDO) of guaiacol. The effects of operating conditions (temperature and pressure) and reaction time (2 and 4 h) on the conversion of guaiacol and products selectivity were studied. The major reaction products were cresol and phenol, followed by xylenols and toluene. The use of more severe operating conditions during the HDO of guaiacol caused a diversification in the reaction pathways, and consequently in the selectivity to products. The formation of phenol may have occurred by demethylation of guaiacol, followed by dehydroxylation of catechol, together with other reaction pathways, including direct guaiacol demethoxylation, and demethylation of cresols. X-ray diffraction (XRD) analysis of spent catalysts did not reveal any significant changes as compared to the fresh catalyst., This work was funded by FEDER and the Spanish Economy and Competitiveness Ministry (MINECO) (ENE2014-52189-C02-01-R and ENE2017-83854-R). Elba Ochoa thanks for the award of her PhD under the frame of this project. J.L.P. thanks MINECO for his Ramon y Cajal research contract (RYC-2013-12494). Rui Moreira is extremely grateful to ICB-CSIC for partially financing living costs during his short term mission., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Towards a sustainable bio-fuels production from lignocellulosic bio-oils: Influence of operating conditions on the hydrodeoxygenation of guaiacol over a Mo2C/CNF catalyst

  • Remón, Javier
  • Ochoa, Elba
  • Foguet, Carlos
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
5 Figuras.- Tablas suplementarias disponibles en línea en la página web del editor.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, This work firstly provides a thorough insight into the effects of the operating conditions (catalyst loading, initial H2 pressure temperature, reaction time, H2/guaiacol ratio and liquid reaction volume) on the hydrodeoxygenation (HDO) of guaiacol over a Mo2C/CNF catalyst. Under the operating condition tested, gas and solid formation was negligible and guaiacol was primary converted to different liquid products, including non-deoxygenated (0-oxy), mono-deoxygenated (1-oxy) and fully deoxygenated (2-oxy) compounds, together with high molecular weight soluble oligomers. An increase in the catalyst loading increased the guaiacol conversion and HDO efficiency, augmenting the proportions of HDO products. Among these species, the progressive transformation of 1-oxy compounds into 2-oxy species was kinetically and thermodynamically controlled by the catalyst loading and the amount of H2 dissolved in the liquid medium, respectively. Augmenting the H2 pressure increased the H2 availability in the liquid, which led to increases over time in the guaiacol conversion and HDO efficiency, thus promoting the production of HDO products and facilitating the transformation of guaiacol into fully de-oxygenated products. This increase depended on the reaction volume, with more pronounced variations occurring for a small than for a large volume due to the greater variations occurring in the H2/guaiacol ratio for the former than the latter. The temperature exerted a kinetic promoting effect together with a thermodynamic inhibitory influence, as some of the reactions involved were not thermodynamically favoured at high temperature. Therefore, the detailed analysis included in this work brings novel information on guaiacol HDO, which can help to establish the basis for catalysts development and reactors design to achieve a sustainable bio-fuels production from lignocellulosic bio-oils., This work was funded by FEDER and the Spanish Economy and Competitiveness Ministry (MINECO) (ENE2014-52189-C02-01-R and ENE2017-83854-R). Elba Ochoa thanks for the award of her PhD under the frame of the aforementioned project. In addition, Javier Remón Núñez would like to express his gratitude to the Spanish Ministry “Ministerio de Ciencia, Innovación y Universidades” for the Juan de la Cierva fellowship (FJCI-2016-30847) awarded., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Carbon nanofiber supported Mo2C catalysts for hydrodeoxygenation of guaiacol: The importance of the carburization process

  • Ochoa, Elba
  • Torres Gamarra, Daniel
  • Moreira, Rui
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
13 Figuras, 4 Tablas.-- Material suplementario disponible en línea en la web del editor.-- © 2018. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Molybdenum carbide catalysts supported on carbon nanofibers (β-Mo2C/CNF) were synthetized employing different carburization parameters: five temperatures (550–750 °C) and four heating rates (1–10 °C/min) were tested. The carburization process of the Mo precursor in the catalysts was studied by thermogravimetric analysis, X-ray diffraction, X-ray photoelectron spectroscopy, N2 physisorption, inductively coupled plasma optical emission spectrometry and transmission electron microscopy. The formation of the carbide phase was confirmed by the presence of the oxycarbide and carbide phases which were observed on the surface of all catalysts. Higher carburization temperatures resulted in an increase of the carbide phase content and crystal size at the expenses of the oxycarbide phase disappearance. High carburization temperatures and low heating rates were needed in order to obtain well-defined β-Mo2C crystals over the catalysts, which involved a substantial improvement of their catalytic activity in the hydrodeoxygenation of guaiacol., This work was funded by FEDER and the Spanish Economy and Competitiveness Ministry (MINECO) (ENE2014-52189-C02-01-R and ENE2017-83854-R). EO thanks for the award of her PhD under the frame of the aforementioned project. JLP thanks MINECO for his Ramon y Cajal research contract (RYC-2013-12494). The microscopy works have been conducted in the “Laboratorio de Microscopías Avanzadas” at “Instituto de Nanociencia de Aragón - Universidad de Zaragoza”. Authors acknowledge the LMA-INA for offering access to their instruments and expertise. RM is extremely grateful to ICB for partially financing his short term mission at the institution., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Scanning different Ni-noble metal (Pt, Pd, Ru) bimetallic nanoparticles supported on carbon nanofibers for one-pot cellobiose conversion

  • Frecha, Esther
  • Torres Gamarra, Daniel
  • Pueyo, A.
  • Suelves Laiglesia, Isabel
  • Pinilla Ibarz, José Luis
16 Figuras, 1 Tabla.-- Documentación suplementaria disponible en línea en la página web del editor.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, The reduction of sugars to their hydrogenated form (sorbitol) emerges as an effective chemical way to enhance the productivity of cellulose depolymerization process. Nickel is not able to meet the activity and selectivity criteria when low metal contents are applied. A very promising alternative consist of Ni doping with noble metals. For this purpose, several carbon nanofibers (CNF) supported Ni-noble metal (Ru, Pt, Pd) catalysts were synthesized and tested in the hydrolytic hydrogenation of cellobiose (a cellulose model compound). The catalytic performance was compared with their monometallic counterparts and it was rationalized according to the characterization results. The Ru/CNF catalyst enabled the practically total hydrogenation of cellobiose, making unnecessary the Ni-Ru alloy formation. In turn, a remarkable synergic effect was noticed for the Ni-Pt/CNF and Ni-Pd/CNF combinations, as the yields to hydrogenation products (including cellobitol and sorbitol) exceeded the sum of the activity of their pure constituents., The authors were grateful for the financial support by FEDER and the Spanish Economy and Competitiveness Ministry (MINECO) (ENE2017-83854-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Graphene oxide nanofibers: A nanocarbon material with tuneable electrochemical properties

  • Torres Gamarra, Daniel
  • Pérez Rodríguez, Sara
  • Sebastián del Río, David
  • Pinilla Ibarz, José Luis
  • Lázaro Elorri, María Jesús
  • Suelves Laiglesia, Isabel
8 Figures, 3 Tables.-- Supplementary material.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, We report the electrochemical properties of a novel nanocarbon material obtained by chemical oxidation and ultrasound-assisted exfoliation of fishbone carbon nanofibers (CNF). The resulting material maintains its tubular morphology and presents a characteristic interlayer spacing of graphene oxide (above 0.75 nm). Thus, this is called graphene oxide nanofibers (GONF). The new rearrangement of the accessible sp2-carbon domains makes the GONF a potential alternative for electrochemical energy conversion/storage applications, showing a developed porosity and tuneable surface chemistry. The influence of the oxidation degree of GONF on its electrochemical behaviour in 0.5 M H2SO4 is reported. Cyclic voltammetry and electrochemical impedance spectroscopy evidenced a significant increase of the capacitance for GONF, being 4–27 times higher than that obtained for pristine CNF. An optimum in the capacitance (49.2 F g−1) was obtained using an oxidation ratio (OR = KMnO4/Sample) of 6 and 60 min of sonication. The latter is ascribed to the unique structure of this material containing both graphitic and graphene oxide domains. Higher OR or longer sonication times led to a partial loss of graphitic domains and higher contribution of micropores, which worsen the fast ion/electrolyte transport. Additionally, the optimized material exhibited an improved activity for the hydrogen evolution reaction., This work was funded by FEDER, the Spanish Ministry of Science, Innovation and Universities MICINN (ENE2017-83976-C2-1-R & ENE2017-83854-R) and by the Aragón Government to the Fuel Conversion Group (T06_17R). DS thanks MICINN for his Ramon y Cajal research contract (RyC-2016-20944)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanostructured carbon material effect on the synthesis of carbon-supported molybdenum carbide catalysts for guaiacol hydrodeoxygenation

  • Ochoa, Elba
  • Torres Gamarra, Daniel
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
© 2020 by the authors.-- 9 figures, 3 tables.-- Supplementary material available., The impact of using different nanostructured carbon materials (carbon nanofibers, carbon nanotubes, graphene oxide and activated carbon) as a support for Mo2C-based catalysts on the hydrodeoxygenation (HDO) of guaiacol was studied. To optimise the catalyst preparation by carbothermal hydrogen reduction (CHR), a thermogravimetric study was conducted to select the optimum CHR temperature for each carbon material, considering both the crystal size of the resulting β-Mo2C particles and the extent of the support gasification. Subsequently, catalysts were prepared in a fixed bed reactor at the optimum temperature. Catalyst characterization evidenced the differences in the catalyst morphology as compared to those prepared in the thermogravimetric study. The HDO results demonstrated that the carbon nanofiber-based catalyst was the one with the best catalytic performance. This behaviour was attributed to the high thermal stability of this support, which prevented its gasification and promoted a good evolution of the crystal size of Mo species. This catalyst exhibited well-dispersed β-Mo2C nanoparticles of ca. 11 nm. On the contrary, the other supports suffered from severe gasification (60–70% wt. loss), which resulted in poorer HDO efficiency catalysts regardless of the β-Mo2C crystal size. This exhibited the importance of the carbon support stability in Mo2C-based catalysts prepared by CHR., This work was funded by European Regional Development Fund and the Spanish Economy and Competitiveness Ministry (MINECO) (ENE2017-83854-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Synthesis and characterization of a supported Pd complex on carbon nanofibers for the selective decarbonylation of stearic acid to 1-heptadecene: the importance of subnanometric Pd dispersion

  • Ochoa, Elba
  • Henao, Wilson
  • Fuertes, Sara
  • Torres Gamarra, Daniel
  • Haasterecht, Tomas van
  • Scott, Elinor
  • Bitter, Harry
  • Suelves Laiglesia, Isabel
  • Pinilla Ibarz, José Luis
13 figures, 6 tables.-- Supplementary information, Production of linear α-olefins from renewable sources is gaining increasing attention because it allows the transition from the current petrochemical synthesis route to a more sustainable scenario. In this work, we describe the synthesis and characterization of an innovative catalyst based on a di-μ-chloro-bis[palladium(II) anthranilate] complex highly dispersed by incipient wetness impregnation over acyl chlorinated carbon nanofibers. The subnanometric dispersion of the metal complex allowed higher catalytic efficiency for the selective decarbonylation of stearic acid to 1-heptadecene as compared to the reference homogenous catalyst. The best catalytic performance (90 mol% selectivity, 71 mol% conversion, and TON = 484) was achieved under mild reaction conditions (atmospheric pressure, 140 °C) with a Pd loading in solution of 0.14 mol%. The post-mortem catalyst characterization and the recyclability tests evidenced the high stability of the catalyst. The highly dispersed catalyst developed in this work provides new opportunities in the rational design of more efficient catalytic systems for the sustainable transformation of fatty acids., The authors are grateful for the financial support from FEDER and the Spanish Economy and Competitiveness Ministry (MINECO) (ENE2017-83854-R). EO acknowledges MINECO for her PhD grant under the frame of the aforementioned project. The authors gratefully acknowledge “Laboratorio de Microscopías Avanzadas” at “Instituto de Nanociencia de Aragón−Universidad de Zaragoza” for offering access to their microscope and expertise. W. Henao acknowledges the financial support from the grant sponsored by Fundación Carolina (Madrid, Spain) and the University of Zaragoza., We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Cobalt doping of α-Fe/Al2O3 catalysts for the production of hydrogen and high-quality carbon nanotubes by thermal decomposition of methane

  • Torres Gamarra, Daniel
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
10 figures, 4 tables.-- © 2020. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Fe–Co/Al2O3 catalysts were developed and tested in the catalytic decomposition of methane (CDM) for the synthesis of multi-wall carbon nanotubes (MWCNT) and the CO2-free hydrogen production. While Fe (54.5–66.7 mol.%) is the main active phase for the carbon formation on the catalyst, Co acts as dopant aiming to improve its overall catalytic behaviour. Catalysts with Co contents of up to 18.2 M% showed the presence of α-Fe and Fe–Co crystallites with different size and lattice parameter. Fe1-xCox alloy with bcc crystal system was identified only for Co contents of 14.0% and above, and presented a lattice constant lower than α-Fe, which would modify the carbon diffusion of the metal particle during the MWCNT growth. Co inhibited the Fe3C formation during CDM resulting in higher carbon formations and longer activity times. This phase, shown in undoped catalysts, favored the presence of bamboo-type carbon nanotubes., This work was funded by the European Regional Development Fund (ERDF) and the Spanish Economy and Competitiveness Ministry (ENE2014-52189-C02-01-R and ENE2017-83854-R). DT thanks for his research contract under the frame of ENE2014-52189-C02-01-R project., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Capacitance enhancement of hydrothermally reduced graphene oxide nanofibers

  • Torres Gamarra, Daniel
  • Pérez Rodríguez, Sara
  • Sebastián del Río, David
  • Pinilla Ibarz, José Luis
  • Lázaro Elorri, María Jesús
  • Suelves Laiglesia, Isabel
9 figures, 4 tables., Nanocarbon materials present sp2-carbon domains skilled for electrochemical energy conversion or storage applications. In this work, we investigate graphene oxide nanofibers (GONFs) as a recent interesting carbon material class. This material combines the filamentous morphology of the starting carbon nanofibers (CNFs) and the interlayer spacing of graphene oxide, and exhibits a domain arrangement accessible for fast transport of electrons and ions. Reduced GONFs (RGONFs) present the partial removal of basal functional groups, resulting in higher mesoporosity, turbostratic stacking, and surface chemistry less restrictive for transport phenomena. Besides, the filament morphology minimizes the severe layer restacking shown in the reduction of conventional graphene oxide sheets. The influence of the reduction temperature (140–220 °C) on the electrochemical behaviour in aqueous 0.5 M H2SO4 of RGONFs is reported. RGONFs present an improved capacitance up to 16 times higher than GONFs, ascribed to the unique structure of RGONFs containing accessible turbostratic domains and restored electronic conductivity. Hydrothermal reduction at 140 °C results in the highest capacitance as evidenced by cyclic voltammetry and electrochemical impedance spectroscopy measurements (up to 137 F·g−1). Higher temperatures lead to the removal of sulphur groups and slightly thicker graphite domains, and consequently a decrease of the capacitance., This research was funded by FEDER, the Spanish Ministry of Science, Innovation and Universities MICINN (ENE2017-83976-C2-1-R & ENE2017-83854-R) and by the Aragón Government to the Fuel Conversion Group (T06_17R). DS thanks MICINN for his Ramón y Cajal research contract (RyC-2016-20944)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Sustainable production of liquid biofuels and value-added platform chemicals by hydrodeoxygenation of lignocellulosic bio-oil over a carbon–neutral Mo2C/CNF catalyst

  • Remón, Javier
  • Casales, Marina
  • Gracia Soguero, Jesús
  • Callén Romero, M. Soledad
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
4 figures, 6 tables.-- © 2020. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, For the first time, this work addresses the hydrodeoxygenation (HDO) of lignocellulosic bio-oil over a carbon–neutral Mo2C/CNF catalyst for the production of liquid biofuels and value-added chemicals, thoroughly examining the effect of the temperature, initial H2 pressure, reaction time and catalyst/bio-oil ratio. These variables had a significant influence on the process, allowing the transformation of the original bio-oil into different fractions in varying yields, including an upgraded bio-oil (17–72%), a solid product (4–44%), an aqueous phase (5–39%) and a gaseous stream (1–15%). The upgraded bio-oil comprised a mix of phenols (56–78%), cyclic ketones (7–30%), carboxylic acids (2–8%), esters (0–9%) and aromatic compounds (0–20%). The relative amounts of C, H and O of this product shifted by 34–78 wt%, 3–8 wt% and 13–62 wt%, while its HHV ranged between 9 and 35 MJ/kg. Process optimisation revealed that using a temperature of 350 °C, an initial H2 pressure of 40 bar and 0.19 g cat/g bio-oil for 1 h, it was possible to convert 65% of the organic content of the bio-oil into a liquid bio-fuel with a HHV of 30 MJ/kg (twice the value of the original feedstock), which represents a deoxygenation degree of 70% and an energy efficiency of 62%. Besides, all the bio-oil organic content can be converted into a liquid product with a high proportion of phenols (79%) at 250 °C, applying an initial H2 pressure of 20 bar and 0.14 g cat/g bio-oil for around 0.5 h. This liquid can be used as a sustainable phenolic-rich antioxidant additive as well as a bio-based source of aromatic compounds. Therefore, these results are a step forward in the biomass conversion over carbon–neutral catalysts., This work was funded by FEDER and the Spanish Economy and Competitiveness Ministry (ENE 2017-83854-R). Javier Remón and Jesús Gracia would like to express their gratitude to the “Ministerio de Ciencia, Innovación y Universidades” for their JdC (FJCI-2016-30847 and IJC2018-037110-I) and FPI (PRE2018-085182) fellowships, respectively awarded., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Analysis and optimisation of a novel ‘almond-refinery’ concept: Simultaneous production of biofuels and value-added chemicals by hydrothermal treatment of almond hulls

  • Remón, Javier
  • Latorre Viu, Javier
  • Matharu, Avtar S.
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
13 figures, 3 tables.-- Supplementary material available.-- © 2020. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, For the first time, this work investigates the achievability of developing a biorefinery concept around almond hulls by hydrothermal treatment (HTT), thoroughly scrutinising the influence of the temperature (200–300 °C), pressure (100–180 bar), time (20–180 min) and solid loading (5–25 wt%). This process allowed the conversion of almond hulls into four main products: gas (2–13%), bio-oil (2–12%), aqueous (4–69%) and hydro-char (17–89%). The gas consisted of a mix of H2, CO2, CO and CH4 with a LHV fluctuating from 1 to 13 MJ/m3 STP. The bio-oil comprised a mixture of alkanes, aldehydes, ketones, phenols, furans, benzenes and nitrogen compounds with a HHV between 21 and 31 MJ/kg. The solid product resembled an energetic hydro-char material (HHV 21–31 MJ/kg), while the aqueous effluent comprised a mixture of value-added chemicals, including saccharides and small oxygenated compounds. The production of biofuels can be maximised at 256 °C and 100 bar, using a 5 wt% solid loading for 157 min, conditions at which 43% of the original feedstock can be converted into an elevated energy-filled bio-oil (11% yield, 30 MJ/kg), along with a high energetic hydro-char (32% yield, 29 MJ/kg). Regarding value-added chemicals, up to 10% of the almond hulls can be converted into a bio-oil with a high proportion (45%) of phenolic species at 250 °C and 144 bar with a solid loading of 5 wt% for 167 min. In comparison, a sugar-rich (81 C-wt%) solution can be produced in high yield (54%), by treating a 24 wt% suspension at 252 °C and 180 bar for 153 min. Therefore, the versatility, novelty and intrinsic green and holistic nature of this ‘almond-refinery’ concept exemplify a landmark achievement in future energy and chemicals production from biomass, which might help render the complete bio-refinery for almond hulls more cost-effectively and ecologically feasible., The authors wish to express their gratefulness to FEDER and the Ministerio de Ciencia, Innovación y Universidades (Grant Number ENE2017-83854-R) for providing financial support. Besides, Javier Remón Núñez is very grateful to the Ministerio de Ciencia, Innovación y Universidades for the Juan de la Cierva (JdC) fellowships (Grant Numbers FJCI-2016-30847 and IJC2018-037110-I) awarded., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Catalytic conversion of fossil and renewable fuel resources: approaches using sub and supercritical water as a reaction medium

  • Arcelus-Arrillaga, Pedro
  • Pinilla Ibarz, José Luis
  • Millan, Marcos
Access to energy is one of the main challenges society will face in the decades to come. Liquid fuels are expected to remain one of the main sources of energy, despite the depletion of conventional fossil fuel reserves. The development of cleaner technologies to transform unconventional energy resources such as heavy oil, biomass and organic residues into fuels is crucial to meeting the world’s future energy demand. Water in hydrothermal conditions near or above the critical point can provide an efficient route to obtain fuels from unconventional sources in a clean and efficient way. For instance, due to its particular physicochemical properties, near-critical water and supercritical water are considered excellent solvents for catalytic organic chemical reactions. In hydrothermal processes, the addition of a catalyst has the purpose of increasing rates of reaction and product yields, suppressing the formation of solids, reducing re-polymerization of intermediate species and promoting cracking reactions. Successful implementation of catalytic processes in hydrothermal conditions requires the development of highly active catalysts that are stable under these conditions without deactivation. In this work, a thorough review of the literature on the application of catalytic hydrothermal processes for the conversion and upgrading of fossil and renewable unconventional fuel resources is presented., José Luis Pinilla is grateful for the financial support of FEDER and the Spanish Economy and Competitiveness Ministry (MINECO) (ENE2017- 83854- R). Pedro Arcelus acknowledges the funding for research provided by Universidad Iberoamericana through the grants Proyecto de Ciencia Básica 0055 and the Capital Semilla funds., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Custom-sized graphene oxide for the hydrolysis of cellulose

  • Frecha, Esther
  • Torres Gamarra, Daniel
  • Suelves Laiglesia, Isabel
  • Pinilla Ibarz, José Luis
11 figures, 4 tables.-- Supplementary information available.-- © 2021. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Carbon nanostructures have attracted a long-lasting interest in cellulose hydrolysis reaction. Herein, the usefulness of catalyst downsizing is addressed using various graphene oxide (GO) morphologies, including nanofibers (GONF), sheets of few-layers (FLGO) and quantum dots (GOQD). Such materials were obtained from carbon nanofibers by oxidative cutting and subsequent exfoliation and fractioning in size. The synthesis process incorporated numerous active species (S- and O- functional groups) onto the carbon sp2-network, whose relative abundance was in some instances tuned by hydrothermal reduction. Chemical and structural analysis of GO materials was performed by XRD, TEM, XPS and elemental analysis. GOQDs, as the smallest particle size GO material, exhibited the highest catalytic activity. However, its behaviour was dependent on the crystalline features of the starting cellulose and the substrate-catalysts interaction degree. Thus, only 17.8% of raw cellulose was depolymerized into sugars after 24 h at 135 °C, which rose to 60.1% upon enhancing its reactivity by ball-milling (8h, 600 rpm). A simple mix-milling of the cellulose with the catalyst for 10 min enabled an effective solid-solid contact, affording complete conversion and 83.5% of glucose. In comparison, 71.3% and 60.4% of glucose was obtained from their sister counterparts: FLGO and GONF, respectively., Authors are grateful for the financial support from FEDER and the Spanish Ministry of Economy and Competitiveness (Project ENE2017-83854-R). The microscopy works have been conducted in the Advanced Microscopy Laboratories (LMA) at Institute of Nanoscience of Aragón (INA). We would like to thank the LMA-INA for offering access to their instruments and expertise. Also, the assistance of Servicio General de Apoyo a la Investigación-SAI (University of Zaragoza) is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Non-oxidative decomposition of propane: Ni-Cu/Al2O3 catalyst for the production of CO2-free hydrogen and high-value carbon nanofibers

  • Torres Gamarra, Daniel
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
9 figures, 1 table.-- © 2020. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, A Ni-Cu/Al2O3 catalyst was tested in the thermal decomposition of propane to produce CO2-free hydrogen and high value-added carbon nanofibers (CNF), the quantity and quality of which are key to making the process economically viable. The effect of temperatures in the range 550–750 °C and space velocities from 24 to 240 l gCat−1 h−1 on the product distribution, conversion, H2 selectivity and carbon formation rate (CFR) was evaluated. In addition to H2, CH4 and C2H4 together with small amounts of C2H6 were detected in the reaction gases. While propane conversion overpassed 90% at 700 °C and higher temperatures, H2 selectivity reached 40% for low space velocities (24 l gCat−1h−1). Likewise, the CFR increased with temperature to 50 gC gCat−1 h−1 at 700 °C, doubling the rates reported for methane or ethane as the feedstock and same reaction conditions. The CNF, thoroughly characterized by XRD, N2 physisorption, SEM and TEM, exhibited bimodal and wide diameter distribution (6–120 nm) and fishbone morphology with high graphitic order (interplanar distance: 0.339–0.347 nm, and crystal sizes around 5 nm) and good textural properties (specific surface area: 100–190 m2 g−1 and total pore volume: 0.23–0.45 cm3 g−1)., This work was funded by the European Regional Development Fund and the Spanish Economy and Competitiveness Ministry (MINECO) (ENE2017-83854-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On the hydrothermal-enhanced synthesis of highly selective Mo2C catalysts to fully deoxygenated products in the guaiacol HDO reaction

  • Ochoa, Elba
  • Torres Gamarra, Daniel
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
5 figures, 5 tables.-- Supplementary information available.-- © 2021. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, We describe the hydrothermal synthesis of carbon nanofibers (CNF) supported Mo2C catalysts with improved efficiency in the hydrodeoxygenation (HDO) of guaiacol as compared to the conventional incipient wetness route. Different impregnation methods were evaluated after careful optimization of the surface chemistry of the support (by HCl wash, HNO3 wash, and N2 thermal treatments) to assist the impregnation of the Mo precursor. CNF pre-treated with HCl exhibited the surface freest of oxygenated groups according to the TPD analyses and resulted in catalysts with higher Mo loadings according to the ICP-OES analysis regardless of the impregnation method used. The Mo2C/CNF catalysts obtained by carbothermal hydrogen reduction of the impregnated supports presented different physicochemical characteristics depending on the impregnation method, as revealed by the characterization carried out by XRD, XPS, ICP-OES and STEM. The hydrothermal impregnation resulted in the highest surface atomic Mo/C ratio, as the evidence of a higher specific surface concentration of both the Mo precursor and carbide on the support, and the largest guaiacol conversion (97%) and HDO ratio (84%) in the HDO of guaiacol at 300 °C and 34 bar H2., This work was funded by the European Regional Development Fund and the Spanish Economy and Competitiveness Ministry (MINECO) (ENE2017-83854-R). Elba Ochoa would like to express their gratitude to the “Ministerio de Ciencia, Innovación y Universidades” for the award of an FPI scholarship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Caffeinating the biofuels market: Effect of the processing conditions during the production of biofuels and high-value chemicals by hydrothermal treatment of residual coffee pulp

  • Remón, Javier
  • Ravaglio Pasquini, F.
  • Pedraza Segura, L.
  • Arcelus-Arrillaga, Pedro
  • Suelves Laiglesia, Isabel
  • Pinilla Ibarz, José Luis
5 figures, 4 tables, supplementary information.-- © 2021. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, The manufacturing of coffee, one of the most popular beverages globally, renders enormous amounts of by-products and wastes, which may trigger severe environmental issues if not treated appropriately. The coffee pulp, resulting from the wet processing of coffee, is the predominant by-product, with around 10 Mt annually produced worldwide. For the first time, this work addresses the hydrothermal treatment of coffee pulp to produce biofuels and platform molecules, scrutinising the influence of the processing conditions (temperature, pressure, reaction time and solid/water ratio) on the process. This strategy allowed the transformation of coffee pulp into bio-crude and hydrochar in different yields (10–26% and 10–42%, respectively), depending on the conditions. The bio-crude included a pool of alkanes, carboxylic acids, ketones, phenols and nitrogen species, with varying quantities of C (54–71 wt%), H (6–7 wt%), O (18–34 wt%) and N (3–5 wt%) and a calorific value shifting from 23 to 32 MJ/kg. The hydrochar contained different proportions of C (57–72 wt%), H (4–6 wt%), O (20–35 wt%) and N (2–3 wt%) and had a calorific value between 22 and 29 MJ/kg. Process optimisation showed that up to 45% of the coffee pulp could be simultaneously converted into energy-rich (29 MJ/kg), merchantable liquid (20% bio-crude) and solid (24% hydrochar) biofuels during the treatment of a 15 wt% coffee pulp suspension at 320 °C and 162 bar for 1 h. At the same time, a bio-crude with a high proportion of profitable phenolic derivatives (42%) can be attained in high yield (25%) when a 5 wt% suspension is treated at 280 °C and 120 bar for 2 h. These promising results, along with the bespoke nature of this hydrothermal treatment, are a landmark achievement for the economy and sustainability of coffee producer countries, thus representing a pioneering step change towards the sustainable management of early-stage coffee leftovers., The authors wish to express their gratefulness to FEDER, the Spanish Ministry of Science, Innovation and Universities (Grant Number ENE2017-83854-R) and the Spanish National Research Council (CSIC) (Grant Number COOPA20367) for providing financial support. Besides, Javier Remón is very grateful to the Spanish Ministry of Science, Innovation and Universities for the Juan de la Cierva (JdC) fellowships (Grant Numbers FJCI-2016-30847 and IJC2018-037110-I) awarded. Lorena Pedraza-Segura and Pedro Arcelus-Arrillaga would like to acknowledge the financial support of INIAT and DINV at Universidad Iberoamericana for their research., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Lignin to monoaromatics with a carbon-nanofiber-supported Ni-CeO2-x catalyst synthesized in a one-pot hydrothermal process

  • Cardoso, Aderlanio
  • Pastor-Pérez, Laura
  • Ramírez-Reina, Tomás
  • Suelves Laiglesia, Isabel
  • Pinilla Ibarz, José Luis
  • Hellgardt, Klaus
  • Millan, Marcos
6 figures, 4 tables.-- Supplementary information available on the publisher’s website., The synthesis of effective heterogeneous catalysts is one of the main challenges toward hydrothermal processing of wood-derived biomass into marketable sustainable chemicals. Many of these catalysts are based on noble metals and are normally synthesized using multiple steps in time-consuming processes. Here, we have developed a one-pot catalyst synthesis method for Ni–CeO2–x supported on carbon nanofibers. In situ H2 production through formic acid decomposition enabled the synthesis of catalysts in their reduced form, with ceria as Ce3+ and presence of metallic Ni. This catalyst promoted Kraft lignin conversion in supercritical water at short reaction times with a 79 wt % yield of a bio-oil composed of nearly 69 wt % of monoaromatics. Thus, lignin breakdown was achieved without resourcing to noble metal catalysts, molecular H2, or cosolvents, with a decrease in catalyst synthesis time and unit operations and with an attractive yield of a chemically uniform product fraction., The authors would like to thank the Brazilian National Council for Scientific and Technological Development (CNPq) for Aderlanio Cardoso’s PhD scholarship and funding EPSRC, UK, (grant number EP/K014676/1). This work was also partly funded by FEDER and the Spanish Economy and Competitiveness Ministry (MINECO) (grant number ENE2017-83854-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Natural Fe-based catalysts for the production of hydrogen and carbon nanomaterials via methane decomposition

  • Alves da Silva, Juliana
  • Oliveira Santos, Joao Batista
  • Torres Gamarra, Daniel
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
10 figures, 4 tables.-- Supplementary information available.-- © 2021. This manuscript version is made available under the CC-BY-NC-ND 4.0 license https://creativecommons.org/licenses/by-nc-nd/4.0/, Tierga and Ilmenite Fe-based ores are studied for the first time in the catalytic decomposition of methane (CDM) for the production of carbon dioxide-free hydrogen and carbon nanomaterials. Tierga exhibits superior catalytic performance at 800 °C. The effect of the reaction temperature, space velocity and reducing atmosphere in the catalytic decomposition of methane is evaluated using Tierga. The highest stability and activity (70 vol% hydrogen concentration) is obtained at 850 °C using methane as a reducing agent. Reduction with methane causes the fragmentation of the iron active phase and inhibits the formation of iron carbide, improving its activity and stability in the CDM. Hybrid nanomaterials composed of graphite sheets and carbon nanotubes with a high degree of graphitization are obtained. Considering its catalytic activity, the carbon quality, and the low cost of the material, Tierga has a competitive performance against synthetic iron-catalysts for carbon dioxide-free hydrogen and solid carbon generation., Brazilian funding to support this work was provided by CNPq [Process 141308/2018-4], FAPESP [Process 2018/01258-5], CAPES [Finance Code 001]. Spanish funding was provided by the European Regional Development Fund and the Spanish Economy and Competitiveness Ministry (MINECO) [ENE2017-83854-R]. Authors would like to acknowledge the use of “Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Ru, Pd, Pt as dopants of carbon nanofibers-supported Ni catalysts for one-pot cellobiose conversion

  • Frecha, Esther
  • Torres Gamarra, Daniel
  • Pueyo, A.
  • Suelves Laiglesia, Isabel
  • Pinilla Ibarz, José Luis
1 figure.-- Talk delivered at the CESEP’19 Conference: 8th International Conference on Carbon for Energy Storage and Environment Protection, October 20-24th, Alicante (Spain).-- © Universidad de Alicante., The reduction of sugars to their hydrogenated forms (sorbitol) emerges as an effective chemical route for enhancing the productivity of cellulose depolymerization process [1]. Whereas nickel does not fulfill the activity and selectivity criteria at low metal contents, its doping with noble metals could represent an economical trade-off., The authors are grateful for the financial support by FEDER and the Spanish Economy and Competitiveness Ministry (MINECO) (ENE2017-83854-R).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Producción de biocombustibles líquidos y compuestos aromáticos a partir de bioaceites: optimización del proceso

  • Gracia Soguero, Jesús
  • Ochoa, Elba
  • Torres Gamarra, Daniel
  • Remón, Javier
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
Póster presentado en la 9ª Jornada de Jóvenes Investigadores de Química y Física de Aragón, celebrada el 16 de diciembre de 2021 en Zaragoza., El uso de biomasa lignocelulósica para la síntesis de biomateriales y la generación de biocombustibles, presenta una serie de retos derivados principalmente de la complejidad de su estructura y de su notoria resistencia a las transformaciones químicas. El alto contenido en oxígeno de los bio-aceites imposibilita su uso como combustible por lo que hay que someterlos a una hidrodesoxigenación catalítica (HDO). Los catalizadores basados en Mo2C soportados sobre nanofibras de carbono (Mo2C/CNF) son capaces de solventar los problemas asociados a los catalizadores típicamente usados en esta reacción (alto coste, desactivación, contaminación de los productos con compuestos de azufre). En este trabajo se demuestra que es posible lograr una producción sostenible de biocombustibles y productos químicos a partir de bioaceites obtenidos mediante pirólisis de biomasa lignocelulósica utilizando catalizadores de Mo2C soportados en CNF., Este trabajo se ha realizado en el marco del proyecto ENE 2017-83854-R (Ministerio de Economía y Competitividad/FEDER) y del proyecto de I+D+i PID2020-115053RB-I00, financiado por MCIN/ AEI/10.13039/501100011033. JG y JR agradecen la concesión de las ayudas FPI (PRE2018-085182) y JdC (FJCI-2016-30847) , respectivamente.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Direct conversion of almond waste into value-added liquids using carbon-neutral catalysts: Hydrothermal hydrogenation of almond hulls over a Ru/CNF catalyst

  • Remón, Javier
  • Sevilla Gasca, Raquel
  • Frecha, Esther
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
5 figures, 3 tables., The almond industry leaves behind substantial amounts of by-products, with almond hulls being the primary residue generated. Given that one way to improve food security is by decreasing waste to reduce environmental impacts, developing sustainable processes to manage this by-product is necessary. Herein, we report on the hydrothermal hydrogenation of almond hulls over a carbon-neutral Ru supported on carbon nanofibres (Ru/CNF) catalyst, addressing the temperature, H2 pressure, time and catalyst loading. These variables controlled the distribution of the reaction products: gas (0–5%), liquid (49–82%) and solid (13–51%), and ruled the composition of the liquid effluent. This aqueous fraction comprised oligomers (46–81 wt%), saccharides (2–7 wt%), sugar alcohols (2–15 wt%), polyhydric alcohols (1–8 wt%) and carboxylic acids (7–31 wt%). The temperature and reaction time influenced the extension of hydrolysis, depolymerisation, deamination, hydrolysis, hydrogenation and dehydration reactions. Additionally, the initial H2 pressure and catalyst loading kinetically promoted these transformations, whose extensions were ruled by the amount of H2 effectively dissolved in the reaction medium and the prevalence of hydrogenations over dehydration/decarboxylation reactions or vice versa depending on the catalyst loading. Process optimisation revealed that it is feasible to convert up to 67% of almond hulls into merchantable oligomers at 230 °C, 35 bar initial H2, using 1 g catalyst/g biomass (0.4 g Ru/g biomass) for 360 min. Additionally, decreasing the temperature to 187 °C without modifying the other parameters could convert this material into oligomers (31 wt%) and small oxygenates (17 wt% carboxylic acids, 11 wt% sugar alcohols and 6 wt% polyhydric alcohols) concurrently. The theoretical energy assessment revealed that the total and partial combustion of the spent solid material could provide the required energy for the process and allow catalyst recovery and reutilisation. This environmental friendliness and holistic features exemplify a landmark step-change to valorising unavoidable food waste., The authors wish to express their gratefulness to FEDER and the Spanish Ministry of Science, Innovation and Universities (Grant Number ENE2017-83854-R) for providing financial support. Besides, Javier Remón is grateful to the Spanish Ministry of Science, Innovation and Universities for the Juan de la Cierva (JdC) fellowships (Grant Numbers FJCI-2016-30847 and IJC2018-037110-I) awarded., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Influencia de las condiciones de operación de la hidrodesoxigenación de bio-oil en un reactor de lecho percolado en continuo

  • Gracia Soguero, Jesús
  • Remón, Javier
  • Torres Gamarra, Daniel
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
1 figura.-- Resumen de la comunicación presentada en la XV Reunión del Grupo Español del Carbón, 24-27 abril 2022, Granada (España).-- C-52.-- D.L. GR 695-2022, La creciente demanda de combustible ha promovido la búsqueda de fuentes de origen renovable alternativas al petróleo. Mediante la pirólisis de biomasa lignocelulósica es posible obtener un aceite pirolítico (bio-oil) con múltiples aplicaciones. No obstante, su alto contenido en oxígeno limita sustancialmente su uso como combustible, haciendo necesaria una etapa previa de desoxigenación. En este sentido, el proceso de hidrodesoxigenación (HDO) catalítica permite obtener un líquido orgánico con propiedades combustibles mejoradas. En este trabajo se presentan los resultados obtenidos durante la HDO de líquidos de pirólisis de biomasa utilizando un catalizador de carburo de molibdeno soportado en nanofibras de carbono (Mo2C/CNF). Inicialmente, se abordó el efecto de las condiciones de operación utilizando guayacol como compuesto modelo del líquido de pirólisis. Posteriormente, se analizó la actividad catalítica del catalizador utilizando una alimentación real consistente en la fracción lignínica de un líquido procedente de la pirólisis de biomasa lignocelulósica (lignin-oil). Estos estudios permitieron evaluar la posibilidad de utilizar los líquidos de pirólisis de biomasa como combustible., Los autores agradecen al MINECO y FEDER (ENE 2017-83854-R) y al MCIN/AEI/10.13039/501100011033 (PID2020-115053RB-I00) la financiación recibida. J.G. y J.R. agradecen la concesión de las ayudas FPI (PRE2018-085182) y JdC (FJCI-2016-30847 y IJC2018-037110-I), respectivamente., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Minerales de hierro como catalizadores para la producción de hidrógeno y nanomateriales de carbono a partir de la descomposición de metano

  • Alves da Silva, Juliana
  • Oliveira Santos, Joao Batista
  • Torres Gamarra, Daniel
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
1 figura.-- Resumen de la comunicación presentada en la XV Reunión del Grupo Español del Carbón, 24-27 abril 2022, Granada (España).-- C-96.-- D.L. GR 695-2022, La descomposición catalítica del metano (DCM) representa un enfoque prometedor para la producción conjunta de H2 libre de CO2 y nanomateriales de carbono de alto valor añadido. En este escenario, los catalizadores basados en Fe son menos costosos que los de Ni o Co y promueven la formación de nanofilamentos de carbono grafíticos con un mayor orden estructural. Los catalizadores basados en Fe requieren también mayores temperaturas de reacción (700-900 ºC) lo que da lugar a un desplazamiento positivo del equilibrio termodinámico de la DCM permitiendo la obtención potencial de mayores conversiones de metano. En el presente trabajo se han estudiado como catalizador dos minerales de hierro de origen natural: tierga (compuesto principalmente por α-Fe2O3) e ilmenita (principalmente Fe2TiO5 y TiO2) procedentes de Tierga (Zaragoza) y Sokndal (Noruega), respectivamente. Dado que el mineral de Tierga mostró un rendimiento catalítico superior al de la ilmenita, éste se empleó en la DCM para evaluar los efectos de la temperatura de reacción y la velocidad espacial, así como el de la atmósfera reductora empleada en la activación del mineral., Este trabajo ha sido financiado por proyectos de diferentes instituciones brasileñas: CNPq [Process 141308/2018-4], FAPESP [Process 2018-01258-5], CAPES [Finance Code 001]; y españolas: Ministerio de Economía y Competitividad [ENE2017-83854-R]; además de contar con la participación de fondos FEDER., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A novel ‘sea-thermal’, synergistic co-valorisation approach for biofuels production from unavoidable food waste (almond hulls) and plastic residues (disposable face masks)

  • Remón, Javier
  • Oriol, Luis
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
6 figures, 5 tables., This work first-time addresses the synergetic hydrothermal co-valorisation of almond hulls (an unavoidable food waste) and FFP2 face masks (a common plastic material) using seawater (a sustainable reaction medium). The effects of the feedstock composition (each material alone and all possible binary combinations) and the reaction medium (deionised water, seawater and all possible binary mixtures) have been evaluated at 350 °C and 170 bar over a wide range of reaction times (20–180 min). Bilateral biomass-plastic synergistic and antagonistic interactions between both feedstocks, combined with several promoting and inhibiting effects displayed by seawater, ruled the distribution of the reaction products and their most important physicochemical and fuel properties. Process optimisation revealed that the formation of an energy-dense (32 MJ/kg) liquid biofuel was maximised (26% biocrude yield) by conducting the process with almond hulls in deionised water for 115 min. At the same time, face masks promoted solid biofuel formation (83% hydrochar yield, 46 MJ/kg) by coprocessing an almond hulls/disposable face masks mixture (8:92 wt%) in salted (seawater/deionised water mixture with 37471 ppm salinity) water for 180 min. Conducting the process with seawater (44608 ppm salinity) for 180 min allowed coprocessing of both materials (22/78 wt% almond hulls/face masks) efficiently to maximise biofuels production (13% biocrude yield, HHV = 33 MJ/kg and 67% hydrochar yield, HHV = 49 MJ/kg). These results are a breakthrough in developing season-free and flexible biorefineries, which contribute to reducing pollution and bringing out the hidden value of human activity common residues., This work was funded by FEDER and the Spanish Ministry of Science, Innovation and Universities (ENE 2017-83854-R) and MCIN/AEI/10.13039/501100011033 (I+D+i project PID2020-115053RB-I00). Javier Remón is grateful to the Spanish Ministry of Science, Innovation and Universities for the Juan de la Cierva (JdC) fellowship (IJC2018-037110-I) awarded., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Design of highly active Ni catalysts supported on carbon nanofibers for the hydrolytic hydrogenation of cellobiose

  • Frecha, Esther
  • Remón, Javier
  • Torres Gamarra, Daniel
  • Suelves Laiglesia, Isabel
  • Pinilla Ibarz, José Luis
1 scheme, 7 figures, 2 tables., The direct transformation of cellulose into sugar alcohols (one-pot conversion) over supported nickel catalysts represents an attractive chemical route for biomass valorization, allowing the use of subcritical water in the hydrolysis step. The effectiveness of this process is substantially conditioned by the hydrogenation ability of the catalyst, determined by design parameters such as the active phase loading and particle size. Herein, mechanistic insights into catalyst design to produce superior activity were outlined using the hydrolytic hydrogenation of cellobiose as a model reaction. Variations in the impregnation technique (precipitation in basic media, incipient wetness impregnation, and the use of colloidal-deposition approaches) endowed carbon-nanofiber-supported catalysts within a wide range of Ni crystal sizes (5.8–20.4 nm) and loadings (5–14 wt%). The link between the properties of these catalysts and their reactivity has been established using characterization techniques such as X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy, and inductively coupled plasma-optical emission spectroscopy (ICP-OES). A fair compromise was found between the Ni surface area (3.89 m2/g) and its resistance against oxidation for intermediate crystallite sizes (∼11.3 nm) loaded at 10.7 wt%, affording the hydrogenation of 81.2% cellobiose to sorbitol after 3 h reaction at 190°C and 4.0 MPa H2 (measured at room temperature). The facile oxidation of smaller Ni particle sizes impeded the use of highly dispersed catalysts to reduce the metal content requirements., The authors are grateful for the financial support from the Spanish Ministry of Economy and Competitiveness (MINECO, Project ENE2017-83854-R) and the I + D + © project PID 2020-115053RB-I00, funded by MCIN/AEI/10.13039/501100011033. JR is grateful to the Spanish Ministry of Science, Innovation and Universities for the Juan de la Cierva Incorporación (JdC-I) fellowship (Grant Number: IJC 2018-037110-I) awarded., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Catalytic hydrolysis of cellulose to glucose: On the influence of graphene oxide morphology under microwave radiation

  • Frecha, Esther
  • Torres Gamarra, Daniel
  • Remón, Javier
  • Gammons, Richard
  • Matharu, Avtar S.
  • Suelves Laiglesia, Isabel
  • Pinilla Ibarz, José Luis
11 figures, 3 tables.-- Supplementary information available., Carbon nanostructures provide a unique platform for the synthesis of novel catalysts for biomass conversion. In this work, a set of graphene oxide (GO)-based materials (nanofibers (GONF), sheets of few-layers (FLGO), and quantum dots (GOQD)), differing structurally in morphology and size, was prepared from fishbone-carbon nanofibers (CNF) and their catalytic behavior was compared on the hydrolysis of amorphous cellulose under microwave (MW) radiation. First, the influence of the reaction temperature (135–180 ºC), holding time (0–120 min), catalyst morphology and cellulose/water ratio (0.25–2.0 wt%) was thoroughly screened and compared with conventional heating mode. The use of GO morphologies in concert with MW energy showed the potential to achieve similar kinetic profiles than previously reported sulfonated carbons (110 kJ/mol) but using considerably less amount of catalyst (cellulose-to-catalyst ratio 12-fold lower). Overall, the reactivity of the GO-catalyst was related to their degree of oxidation/exfoliation, decreasing as follows: GOQD > FLGO > GONF. Compared with conventional heating, MW-technology enabled higher loadings of cellulose (2.0 vs. 0.25 wt%) to be processed in a shorter time (20 min instead of 24 h), which is a landmark achievement toward process intensification., The authors are grateful for the financial support from the Spanish Ministry of Economy and Competitiveness (MINECO, Project ENE2017–83854-R) and the I+D+i project PID2020–115053RB-I00, funded by MCIN/ AEI/10.13039/501100011033. E.F. also thanks Ibercaja bank entity for a grant-in-aid for foreign research stays (CB 7/19). J.R. is grateful to the Spanish Ministry of Science, Innovation and Universities for the Juan de la Cierva Incorporación (JdC-I) fellowship (Grant Number: IJC2018–037110-I) awarded. DT is grateful for the Juan de la Cierva Incorporación (JdC-I) fellowship (Grant Number: IJC2020–045553-I) funded by MCIN/AEI/ 10.13039/501100011033 and by “European Union NextGenerationEU/PRTR”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optimisation of the processing conditions of hydrolytic hydrogenation of cellulose using carbon nanofiber supported Ni catalysts

  • Frecha, Esther
  • Remón, Javier
  • Torres Gamarra, Daniel
  • Suelves Laiglesia, Isabel
  • Pinilla Ibarz, José Luis
14 figures, 6 tables., The synthesis of sorbitol from cellulose over Ni catalysts is a promising valorisation route in the biorefinery scenario, applying relatively simple preparation methods and earth-abundant metals. The overall selectivity, however, depends on the kinetic control of a complex reaction network, involving the hydrolysis of cellulose to monosaccharides via cello-oligomers, glucose hydrogenation into sorbitol and hydrogenolysis side-reactions of sugars and sorbitol to low molecular weight polyols. Therein, subtle changes in the catalyst composition and process conditions might have a strong impact on the final product distribution. Driven by these challenges, this work first-time provides novel insights into the hydrothermal hydrogenation of cellulose over a carbon nanofibre supported Ni catalyst (Ni/CNF). Firstly, the impact of the duration of a ball-milling pre-treatment step and the influences of the hydrothermal time and temperature were thoroughly analysed. The experimental results obtained highlighted the importance of process control to promote the first transformation of cellulose to glucose and its subsequent hydrogenation to sorbitol to minimise the extension of side reactions. Finally, an additional study was conducted to palliate the recalcitrant nature of cellulose by decreasing mass transfer limitations to a minimum extent. This was achieved by including an additional mix-milling of the amorphous cellulose produced in the first pre-treatment with the catalyst and increasing the H2 pressure of the hydrothermal hydrogenation process. This allowed attaining a sorbitol yield as high as 62% at 190 ºC using an initial H2 pressure of 8 MPa for 26 h, which is one of the best results reported in the literature., The authors are grateful for the financial support from the Spanish Ministry of Economy and Competitiveness (MINECO, Project ENE2017-83854-R) and the I+D+i project PID2020-115053RB-I00, funded by MCIN/ AEI/10.13039/501100011033. J.R. and D.T. are grateful to the Spanish Ministry of Science, Innovation and Universities for the Juan de la Cierva Incorporación (JdC-I) fellowships (Grant Numbers: IJC2018-037110-I and IJC2020-045553-I, respectively) awarded., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Capacitance enhancement of hydrothermally reduced graphene oxide nanofibers

  • Torres Gamarra, Daniel
  • Pérez Rodríguez, Sara
  • Sebastián del Río, David
  • Pinilla Ibarz, José Luis
  • Lázaro Elorri, María Jesús
  • Suelves Laiglesia, Isabel
9 figures, 4 tables., Nanocarbon materials present sp2-carbon domains skilled for electrochemical energy conversion or storage applications. In this work, we investigate graphene oxide nanofibers (GONFs) as a recent interesting carbon material class. This material combines the filamentous morphology of the starting carbon nanofibers (CNFs) and the interlayer spacing of graphene oxide, and exhibits a domain arrangement accessible for fast transport of electrons and ions. Reduced GONFs (RGONFs) present the partial removal of basal functional groups, resulting in higher mesoporosity, turbostratic stacking, and surface chemistry less restrictive for transport phenomena. Besides, the filament morphology minimizes the severe layer restacking shown in the reduction of conventional graphene oxide sheets. The influence of the reduction temperature (140–220 °C) on the electrochemical behaviour in aqueous 0.5 M H2SO4 of RGONFs is reported. RGONFs present an improved capacitance up to 16 times higher than GONFs, ascribed to the unique structure of RGONFs containing accessible turbostratic domains and restored electronic conductivity. Hydrothermal reduction at 140 °C results in the highest capacitance as evidenced by cyclic voltammetry and electrochemical impedance spectroscopy measurements (up to 137 F·g−1). Higher temperatures lead to the removal of sulphur groups and slightly thicker graphite domains, and consequently a decrease of the capacitance., This research was funded by FEDER, the Spanish Ministry of Science, Innovation and Universities MICINN (ENE2017-83976-C2-1-R & ENE2017-83854-R) and by the Aragón Government to the Fuel Conversion Group (T06_17R). DS thanks MICINN for his Ramón y Cajal research contract (RyC-2016-20944)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Catalytic valorisation of the effluents generated during the defibrillation process of cellulose from almond hulls: A holistic zero-waste biorefinery approach

  • Frecha, Esther
  • Remón, Javier
  • Sulaeman, Allyn P.
  • Matharu, Avtar S.
  • Suelves Laiglesia, Isabel
  • Pinilla Ibarz, José Luis
5 figures, 7 tables.-- Supplementary information available., The acid-free hydrothermal microwave–assisted selective scissoring (Hymass concept) of cellulosic substrates is gaining keen interest in the field of materials science. Besides, implementing catalytic methodologies to upgrade side streams produced during this process could contribute to better, holistic utilisation of the starting feedstock. This work depicts a zero-waste biorefinery concept based on cellulose defibrillation from almond hulls using various hydrotreatment technologies (hydrogenation and hydrodeoxygenation) for downstream processing on a ruthenium catalyst. Therein, the hemicellulose separated from the biomass preconditioning step was converted into sugar alcohols and/or marketable polyols with a relatively high yield (47.4%) by hydrolytic hydrogenation (437 K, 3h, 5.0 MPa H2). Meanwhile, a family of bioactive compounds (3-hydroxypyridines) could be directly extracted from the hydrolysate stream derived from microwave digestion, along with an energy carrier that was chemically stabilised (503 K, 60 min, 4.0 MPa H2) to obtain fuel additives (diethyl succinic acid, DES) and/or fuel intermediates., The authors are grateful for the financial support from the Spanish Ministry of Economy and Competitiveness (MINECO, Project ENE2017-83854-R) and the I+D+i project PID2020-115053RB-I00, funded by MCIN/AEI/10.13039/501100011033. J.R. is grateful to the Spanish Ministry of Science, Innovation and Universities for the Juan de la Cierva Incorporación (JdC-I) fellowship (Grant Number: IJC2018-037110-I) awarded., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Highly selective catalytic hydrodeoxygenation of guaiacol to benzene in continuous operation mode

  • Gracia Soguero, Jesús
  • Ayala Cortés, Alejandro
  • Di Stasi, Christian
  • Remón, Javier
  • Torres Gamarra, Daniel
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
8 figures, 1 table., Benzene, mostly produced from fossil fuel sources, is an essential chemical to many modern industries. Alternatively to non-renewable methods currently used, the present work explores using fast pyrolysis biomass-derived bio-oils to furnish this valuable platform molecule. Notably, we report for the first time the impact of different operational parameters on the highly selective continuous catalytic hydrodeoxygenation of guaiacol, a bio-oil model compound, into benzene using a Mo2C/CNF-based catalyst. The parametric study includes a first evaluation of the effect of the hydrogen pressure (25, 50 and 75 bar), temperature (300, 325 and 350 °C) and weight hourly space velocity (4 and 10 gorg gcat−1 h−1) on the guaiacol conversion and product distribution, and a subsequent long-term evaluation (30 h on stream) of the catalyst under appropriate processing conditions The experimental results revelated that our Mo2C/CNF was able to achieve a conversion of 90–98% with a relative amount of benzene in the liquid product up to 81% for at least 30 h without any sign of deactivation at 75 bar of H2 and 350 °C, which is a landmark achievement in the conversion of bio-oil derived molecules into platform chemicals., The authors are grateful for the financial support from the Spanish Ministry of Economy and Competitiveness (MINECO, Project ENE2017-83854-R) and the I + D + i project PID2020-115053RB-I00, funded by MCIN/ AEI/10.13039/501100011033 and by Aragón Government (Research Group Reference T06-23R). J.R., DT and CDS are grateful to the Spanish Ministry of Science, Innovation and Universities for the Juan de la Cierva Incorporación (JdC-I) fellowships (Grant Number: IJC2018-037110-I, IJC2020-045553-I and JDC2022-048765-I, respectively) awarded. J.R. also thanks MCIN/AEI/10.13039/501100011033 and the European Union «NextGenerationEU»/PRTR» for the Ramón y Cajal Fellowship (RYC2021-033368-I) awarded, and the Aragón Government (Research Group Reference T22_23R) for providing frame support. JG is grateful to the Spanish Ministry of Science, Innovation and Universities for his FPI (PRE2018-085182) fellowships., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanopartículas de rutenio soportadas sobre nanofibras de carbono para la valorización de los efluentes generados durante la extracción de nanocelulosa

  • Frecha, Esther
  • Remón, Javier
  • Sulaeman, Allyn P.
  • Matharu, Avtar S.
  • Suelves Laiglesia, Isabel
  • Pinilla Ibarz, José Luis
1 figura.-- Póster presentado en la XVI REUNIÓN GEC 2023 en la sección Aplicaciones catalíticas, medioambientales y biosanitarias, Gijón (España), celebrada del 22 al 25 de octubre de 2023., En un contexto de biorrefinería y desarrollo sostenible, la síntesis de materiales, productos químicos y energía a partir de recursos renovables es una tarea prioritaria. Para asegurar la viabilidad económica y medioambiental de estos procesos, sin embargo, es necesario incluir la recuperación de corrientes secundarias en la estrategia de valorización global. En esta línea, el presente trabajo describe una propuesta de biorrefinería basada en el proceso de defibrilación de celulosa a partir de pericarpios de almendra, en la que varias tecnologías de hidrotratamiento (hidrogenación y desoxigenación) fueron interconectadas con las etapas adecuadas de separación y extracción para la obtención simultánea de azúcares alcohólicos (sorbitol y xilitol) y una fase orgánica útil como fuente adicional de productos químicos y/o energía., Los autores agradecen el apoyo financiero del Ministerio de Economía y Competitividad de España (MINECO, Proyecto ENE2017-83854-R), al proyecto de I+D+i PID2020-115053RB-I00, financiado por MCIN/ AEI/10.13039/501100011033 así como al Gobierno de Aragón por la subvención concedida al Grupo de Conversión de Combustibles (T06_23R)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Synthesis and characterization of a supported Pd complex on carbon nanofibers for the selective decarbonylation of stearic acid to 1-heptadecene: the importance of subnanometric Pd dispersion

  • Ochoa, E.
  • Henao, W.
  • Fuertes, S.
  • Torres, D.
  • van Haasterech, T.
  • Scott, E.
  • Bitter, H.
  • Suelves, I.
  • Pinilla, J.L.
Production of linear alpha-olefins from renewable sources is gaining increasing attention because it allows the transition from the current petrochemical synthesis route to a more sustainable scenario. In this work, we describe the synthesis and characterization of an innovative catalyst based on a di-mu-chloro-bis[palladium(ii) anthranilate] complex highly dispersed by incipient wetness impregnation over acyl chlorinated carbon nanofibers. The subnanometric dispersion of the metal complex allowed higher catalytic efficiency for the selective decarbonylation of stearic acid to 1-heptadecene as compared to the reference homogenous catalyst. The best catalytic performance (90 mol% selectivity, 71 mol% conversion, and TON = 484) was achieved under mild reaction conditions (atmospheric pressure, 140 degrees C) with a Pd loading in solution of 0.14 mol%. The post-mortem catalyst characterization and the recyclability tests evidenced the high stability of the catalyst. The highly dispersed catalyst developed in this work provides new opportunities in the rational design of more efficient catalytic systems for the sustainable transformation of fatty acids.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Design of highly active Ni catalysts supported on carbon nanofibers for the hydrolytic hydrogenation of cellobiose

  • Frecha, Esther
  • Remón, Javier
  • Torres, Daniel
  • Suelves, Isabel
  • Pinilla, José Luis
The direct transformation of cellulose into sugar alcohols (one-pot conversion) over supported nickel catalysts represents an attractive chemical route for biomass valorization, allowing the use of subcritical water in the hydrolysis step. The effectiveness of this process is substantially conditioned by the hydrogenation ability of the catalyst, determined by design parameters such as the active phase loading and particle size. Herein, mechanistic insights into catalyst design to produce superior activity were outlined using the hydrolytic hydrogenation of cellobiose as a model reaction. Variations in the impregnation technique (precipitation in basic media, incipient wetness impregnation, and the use of colloidal-deposition approaches) endowed carbon-nanofiber-supported catalysts within a wide range of Ni crystal sizes (5.8–20.4 nm) and loadings (5–14 wt%). The link between the properties of these catalysts and their reactivity has been established using characterization techniques such as X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy, and inductively coupled plasma-optical emission spectroscopy (ICP-OES). A fair compromise was found between the Ni surface area (3.89 m2/g) and its resistance against oxidation for intermediate crystallite sizes (∼11.3 nm) loaded at 10.7 wt%, affording the hydrogenation of 81.2% cellobiose to sorbitol after 3 h reaction at 190°C and 4.0 MPa H2 (measured at room temperature). The facile oxidation of smaller Ni particle sizes impeded the use of highly dispersed catalysts to reduce the metal content requirements.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A novel ‘sea-thermal’, synergistic co-valorisation approach for biofuels production from unavoidable food waste (almond hulls) and plastic residues (disposable face masks)

  • Remón, Javier
  • Zapata, Gonzalo
  • Oriol, Luis
  • Pinilla, José Luis
  • Suelves, Isabel
This work first-time addresses the synergetic hydrothermal co-valorisation of almond hulls (an unavoidable food waste) and FFP2 face masks (a common plastic material) using seawater (a sustainable reaction medium). The effects of the feedstock composition (each material alone and all possible binary combinations) and the reaction medium (deionised water, seawater and all possible binary mixtures) have been evaluated at 350 °C and 170 bar over a wide range of reaction times (20–180 min). Bilateral biomass-plastic synergistic and antagonistic interactions between both feedstocks, combined with several promoting and inhibiting effects displayed by seawater, ruled the distribution of the reaction products and their most important physicochemical and fuel properties. Process optimisation revealed that the formation of an energy-dense (32 MJ/kg) liquid biofuel was maximised (26% biocrude yield) by conducting the process with almond hulls in deionised water for 115 min. At the same time, face masks promoted solid biofuel formation (83% hydrochar yield, 46 MJ/kg) by coprocessing an almond hulls/disposable face masks mixture (8:92 wt%) in salted (seawater/deionised water mixture with 37471 ppm salinity) water for 180 min. Conducting the process with seawater (44608 ppm salinity) for 180 min allowed coprocessing of both materials (22/78 wt% almond hulls/face masks) efficiently to maximise biofuels production (13% biocrude yield, HHV = 33 MJ/kg and 67% hydrochar yield, HHV = 49 MJ/kg). These results are a breakthrough in developing season-free and flexible biorefineries, which contribute to reducing pollution and bringing out the hidden value of human activity common residues.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Custom-sized graphene oxide for the hydrolysis of cellulose

  • Frecha, E.
  • Torres, D.
  • Suelves, I.
  • Pinilla, J.L.
Carbon nanostructures have attracted a long-lasting interest in cellulose hydrolysis reaction. Herein, the usefulness of catalyst downsizing is addressed using various graphene oxide (GO) morphologies, including nanofibers (GONF), sheets of few-layers (FLGO) and quantum dots (GOQD). Such materials were obtained from carbon nanofibers by oxidative cutting and subsequent exfoliation and fractioning in size. The synthesis process incorporated numerous active species (S- and O- functional groups) onto the carbon sp2-network, whose relative abundance was in some instances tuned by hydrothermal reduction. Chemical and structural analysis of GO materials was performed by XRD, TEM, XPS and elemental analysis. GOQDs, as the smallest particle size GO material, exhibited the highest catalytic activity. However, its behaviour was dependent on the crystalline features of the starting cellulose and the substrate-catalysts interaction degree. Thus, only 17.8% of raw cellulose was depolymerized into sugars after 24 h at 135 °C, which rose to 60.1% upon enhancing its reactivity by ball-milling (8h, 600 rpm). A simple mix-milling of the cellulose with the catalyst for 10 min enabled an effective solid-solid contact, affording complete conversion and 83.5% of glucose. In comparison, 71.3% and 60.4% of glucose was obtained from their sister counterparts: FLGO and GONF, respectively.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Catalytic hydrolysis of cellulose to glucose: on the influence of graphene oxide morphology under microwave radiation

  • Frecha, E.
  • Torres, D.
  • Remón, J.
  • Gammons, R.
  • Matharu, A.S.
  • Suelves, I.
  • Pinilla, J.L.
Carbon nanostructures provide a unique platform for the synthesis of novel catalysts for biomass conversion. In this work, a set of graphene oxide (GO)-based materials (nanofibers (GONF), sheets of few-layers (FLGO), and quantum dots (GOQD)), differing structurally in morphology and size, was prepared from fishbone-carbon nanofibers (CNF) and their catalytic behavior was compared on the hydrolysis of amorphous cellulose under microwave (MW) radiation. First, the influence of the reaction temperature (135–180 ºC), holding time (0–120 min), catalyst morphology and cellulose/water ratio (0.25–2.0 wt%) was thoroughly screened and compared with conventional heating mode. The use of GO morphologies in concert with MW energy showed the potential to achieve similar kinetic profiles than previously reported sulfonated carbons (110 kJ/mol) but using considerably less amount of catalyst (cellulose-to-catalyst ratio 12-fold lower). Overall, the reactivity of the GO-catalyst was related to their degree of oxidation/exfoliation, decreasing as follows: GOQD > FLGO > GONF. Compared with conventional heating, MW-technology enabled higher loadings of cellulose (2.0 vs. 0.25 wt%) to be processed in a shorter time (20 min instead of 24 h), which is a landmark achievement toward process intensification.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Optimisation of the processing conditions of hydrolytic hydrogenation of cellulose using carbon nanofiber supported Ni catalysts

  • Frecha, E.
  • Remón, J.
  • Torres, D.
  • Suelves, I.
  • Pinilla, J.L.
The synthesis of sorbitol from cellulose over Ni catalysts is a promising valorisation route in the biorefinery scenario, applying relatively simple preparation methods and earth-abundant metals. The overall selectivity, however, depends on the kinetic control of a complex reaction network, involving the hydrolysis of cellulose to monosaccharides via cello-oligomers, glucose hydrogenation into sorbitol and hydrogenolysis side-reactions of sugars and sorbitol to low molecular weight polyols. Therein, subtle changes in the catalyst composition and process conditions might have a strong impact on the final product distribution. Driven by these challenges, this work first-time provides novel insights into the hydrothermal hydrogenation of cellulose over a carbon nanofibre supported Ni catalyst (Ni/CNF). Firstly, the impact of the duration of a ball-milling pre-treatment step and the influences of the hydrothermal time and temperature were thoroughly analysed. The experimental results obtained highlighted the importance of process control to promote the first transformation of cellulose to glucose and its subsequent hydrogenation to sorbitol to minimise the extension of side reactions. Finally, an additional study was conducted to palliate the recalcitrant nature of cellulose by decreasing mass transfer limitations to a minimum extent. This was achieved by including an additional mix-milling of the amorphous cellulose produced in the first pre-treatment with the catalyst and increasing the H2 pressure of the hydrothermal hydrogenation process. This allowed attaining a sorbitol yield as high as 62% at 190 ºC using an initial H2 pressure of 8 MPa for 26 h, which is one of the best results reported in the literature.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Catalytic valorisation of the effluents generated during the defibrillation process of cellulose from almond hulls: A holistic zero-waste biorefinery approach

  • Frecha, E.
  • Remón, J.
  • Sulaeman, A.P.
  • Matharu, A.S.
  • Suelves, I.
  • Pinilla, J.L.
The acid-free hydrothermal microwave–assisted selective scissoring (Hymass concept) of cellulosic substrates is gaining keen interest in the field of materials science. Besides, implementing catalytic methodologies to upgrade side streams produced during this process could contribute to better, holistic utilisation of the starting feedstock. This work depicts a zero-waste biorefinery concept based on cellulose defibrillation from almond hulls using various hydrotreatment technologies (hydrogenation and hydrodeoxygenation) for downstream processing on a ruthenium catalyst. Therein, the hemicellulose separated from the biomass preconditioning step was converted into sugar alcohols and/or marketable polyols with a relatively high yield (47.4%) by hydrolytic hydrogenation (437 K, 3h, 5.0 MPa H2). Meanwhile, a family of bioactive compounds (3-hydroxypyridines) could be directly extracted from the hydrolysate stream derived from microwave digestion, along with an energy carrier that was chemically stabilised (503 K, 60 min, 4.0 MPa H2) to obtain fuel additives (diethyl succinic acid, DES) and/or fuel intermediates.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Caffeinating the biofuels market: Effect of the processing conditions during the production of biofuels and high-value chemicals by hydrothermal treatment of residual coffee pulp

  • Remón, Javier
  • Ravaglio-Pasquini, Felipe
  • Pedraza-Segura, Lorena
  • Arcelus-Arrillaga, Pedro
  • Suelves, Isabel
  • Pinilla, José Luis
The manufacturing of coffee, one of the most popular beverages globally, renders enormous amounts of by-products and wastes, which may trigger severe environmental issues if not treated appropriately. The coffee pulp, resulting from the wet processing of coffee, is the predominant by-product, with around 10 Mt annually produced worldwide. For the first time, this work addresses the hydrothermal treatment of coffee pulp to produce biofuels and platform molecules, scrutinising the influence of the processing conditions (temperature, pressure, reaction time and solid/water ratio) on the process. This strategy allowed the transformation of coffee pulp into bio-crude and hydrochar in different yields (10–26% and 10–42%, respectively), depending on the conditions. The bio-crude included a pool of alkanes, carboxylic acids, ketones, phenols and nitrogen species, with varying quantities of C (54–71 wt%), H (6–7 wt%), O (18–34 wt%) and N (3–5 wt%) and a calorific value shifting from 23 to 32 MJ/kg. The hydrochar contained different proportions of C (57–72 wt%), H (4–6 wt%), O (20–35 wt%) and N (2–3 wt%) and had a calorific value between 22 and 29 MJ/kg. Process optimisation showed that up to 45% of the coffee pulp could be simultaneously converted into energy-rich (29 MJ/kg), merchantable liquid (20% bio-crude) and solid (24% hydrochar) biofuels during the treatment of a 15 wt% coffee pulp suspension at 320 °C and 162 bar for 1 h. At the same time, a bio-crude with a high proportion of profitable phenolic derivatives (42%) can be attained in high yield (25%) when a 5 wt% suspension is treated at 280 °C and 120 bar for 2 h. These promising results, along with the bespoke nature of this hydrothermal treatment, are a landmark achievement for the economy and sustainability of coffee producer countries, thus representing a pioneering step change towards the sustainable management of early-stage coffee leftovers.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Direct conversion of almond waste into value-added liquids using carbon-neutral catalysts: Hydrothermal hydrogenation of almond hulls over a Ru/CNF catalyst

  • Remón, Javier
  • Sevilla-Gasca, Raquel
  • Frecha, Esther
  • Pinilla, José Luis
  • Suelves, Isabel
The almond industry leaves behind substantial amounts of by-products, with almond hulls being the primary residue generated. Given that one way to improve food security is by decreasing waste to reduce environmental impacts, developing sustainable processes to manage this by-product is necessary. Herein, we report on the hydrothermal hydrogenation of almond hulls over a carbon-neutral Ru supported on carbon nanofibres (Ru/CNF) catalyst, addressing the temperature, H2 pressure, time and catalyst loading. These variables controlled the distribution of the reaction products: gas (0–5%), liquid (49–82%) and solid (13–51%), and ruled the composition of the liquid effluent. This aqueous fraction comprised oligomers (46–81 wt%), saccharides (2–7 wt%), sugar alcohols (2–15 wt%), polyhydric alcohols (1–8 wt%) and carboxylic acids (7–31 wt%). The temperature and reaction time influenced the extension of hydrolysis, depolymerisation, deamination, hydrolysis, hydrogenation and dehydration reactions. Additionally, the initial H2 pressure and catalyst loading kinetically promoted these transformations, whose extensions were ruled by the amount of H2 effectively dissolved in the reaction medium and the prevalence of hydrogenations over dehydration/decarboxylation reactions or vice versa depending on the catalyst loading. Process optimisation revealed that it is feasible to convert up to 67% of almond hulls into merchantable oligomers at 230 °C, 35 bar initial H2, using 1 g catalyst/g biomass (0.4 g Ru/g biomass) for 360 min. Additionally, decreasing the temperature to 187 °C without modifying the other parameters could convert this material into oligomers (31 wt%) and small oxygenates (17 wt% carboxylic acids, 11 wt% sugar alcohols and 6 wt% polyhydric alcohols) concurrently. The theoretical energy assessment revealed that the total and partial combustion of the spent solid material could provide the required energy for the process and allow catalyst recovery and reutilisation. This environmental friendliness and holistic features exemplify a landmark step-change to valorising unavoidable food waste.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Highly selective catalytic hydrodeoxygenation of guaiacol to benzene in continuous operation mode

  • Gracia, J.
  • Ayala-Cortés, A.
  • Di Stasi, C.
  • Remón, J.
  • Torres, D.
  • Pinilla, J.L.
  • Suelves, I.
Benzene, mostly produced from fossil fuel sources, is an essential chemical to many modern industries. Alternatively to non-renewable methods currently used, the present work explores using fast pyrolysis biomass-derived bio-oils to furnish this valuable platform molecule. Notably, we report for the first time the impact of different operational parameters on the highly selective continuous catalytic hydrodeoxygenation of guaiacol, a bio-oil model compound, into benzene using a Mo2C/CNF-based catalyst. The parametric study includes a first evaluation of the effect of the hydrogen pressure (25, 50 and 75 bar), temperature (300, 325 and 350 °C) and weight hourly space velocity (4 and 10 gorg gcat−1 h−1) on the guaiacol conversion and product distribution, and a subsequent long-term evaluation (30 h on stream) of the catalyst under appropriate processing conditions The experimental results revelated that our Mo2C/CNF was able to achieve a conversion of 90–98% with a relative amount of benzene in the liquid product up to 81% for at least 30 h without any sign of deactivation at 75 bar of H2 and 350 °C, which is a landmark achievement in the conversion of bio-oil derived molecules into platform chemicals.